For FAQs and more information, please visit:
anker.com/support
@anker_official
@anker_jp
@Anker Deutschland
@Anker Japan
@Anker
@AnkerOfficial
@Anker_JP Product Number: A2558 51005003488 V01 English 01 05 EN LED Indicators All LED lights stay solid white for 3 seconds, then off The LED lights on the two sides stay solid white The LED lights in the middle stay solid white The corresponding LED light flashes white All LED lights flash white Status Connected to power Charging your phones Charging your earbuds Metal object detected Overvoltage or undervoltage protection activated Incompatible AC adapter connected. Switch to a Quick Charge 2.0/3.0 or Power Delivery adapter T You cannot charge your device wirelessly in these scenarios:
1). When using a case with a magnetic/iron plate;
2). When using a case with a grip or stand;
3). When using an ultra-thick (> 5 mm) protective phone case. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless charging products make charging more convenient than wired chargers,but confined by current wireless technology, their charging speed is slower than that of wired chargers. EN 01 High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40C / 104F. Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on or near this product. Only use a dry cloth or brush to clean this product. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off 02 EN and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement:
This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the product and your body. The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Warning Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-
exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. EN 03 IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body. JP IC RF dclaration d'exposition:
Este equipo cumple con los Iimites de exposici6n a radacion por radiofrecuencia de la IC estipulados para un ambiente no controlado. Este equipo debera instalarse y utilizarse con una distancia minima de 10 cm entre el radiador y el cuerpo. Specifications Input Output 5A 12V Wireless: 5W / 7.5W / 10W (for phones) 5W Max (for earbuds) USB-A: 5V 2.4A Max Operating Temperature 0C - 40C Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importers are the responsible parties (contract for EU and UK matters) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. 04 EN LED LED 3 LED LED
( ) LED LED
Qualcomm Quick Charge 2.03.0 USB Power Delivery 1) /
2) 3) (5mm ) Qualcomm Quick Charge 2.03.0 USB Power Delivery 5V/1A PC USB
NFC
( IC ) ) JP 05 40 Customer Service JP:
40 C
( ) EN: 18-month limited warranty*
JP:
18 () EN: Lifetime Technical Support JP:
support@anker.com support.mea@anker.com (For Middle East and Africa Only)
(US) +1 (800)988 7973 Mon-Fri 6:15AM - 5:00PM(PT)
(UK) +44 (0) 1604 936200 Mon-Sat 6:00 - 19:00; Sun 6:00 - 14:00
) 03 4455 7823 9:00 - 17:00 /
* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. 12V 5A
: 5W/7.5W/10W ( ) 5W ( ) USB-A: 5V=2.4A 0 C - 40 C 06 JP 07