FCC ID: 2AOKB-A3311 AnkerWork SR500 Speakerphone

Anker Innovations Limited. All rights reserved. Anker and the Anker logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. Model: A3311 51005003584 V01 Important Safety Information Read all instructions before installing or operating the product. Store in a cool and dry place. Do not store the product in a hot or humid environment. Use of a power supply or charger that is not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons. Operating temperature should be between 0C to 40C. Do not disassemble the product or make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty. Do not clean the product with harmful chemicals or detergents. Misuse, dropping, or excessive force may cause product damage. Do not subject the product to mechanical shock, crushing, or cutting. Do not short-circuit the product or let it be short-circuited by other metal objects. To reduce the risk of injury, close supervision is necessary when this product is used near children, or keep the device out of the reach of children. Do not put fingers or hands into the product. Do not use the device in excess of its output rating. Overloading outputs above its rating may result in a risk of fire or injury to persons. Do not use the device if it is damaged or modified. It may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. Have servicing performed by a qualified repair person using only identical replacement parts. Servicing is required when the device has been damaged, such as

- When the power supply or cord is damaged;

- When liquid has been spilled or objects have fallen into the device;

- When the device has been exposed to rain or moisture, does not operate normally, or has been dropped. Switch off the device when not in use. Do not install this equipment near any heat sources or in a confined space, such as a bookcase or similar unit, and ensure it remains in a well-ventilated area. Protect the power supply or cord from being walked on or pinched. Unplug this device during lightning storms or when unused for long periods of time. WARNING: Use only power supplies / attachments / accessories specified by the manufacturer. Indoor use only. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential EN 01 02 EN installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiation and your body. The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973 Notice to Canadian users This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

EN 03

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement. Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure conditions. This equipment shall be installed and operated with minimum distance 20cm between the radiator &

body. Cet quipement est conforme aux limites d'exposition IC tablies pour un environnement non contrl. L'appareil peut tre utilis dans des conditions d'exposition portables. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et le corps. CAN ICES-003 (B) / NMB-003 (B) This Class B digital apparatus complies with Canadian ICES-003.

(Cet appareil numrique de la Classe B conforme la norme NMB-003 du Canada).

* Additional Legal Rights for Consumers For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by AnkerWork's Limited Warranty are in addition to all rights and remedies conveyed by such consumer protection laws and regulations, including but not limited to these additional rights. For FAQs and more information, please visit https://support.ankerwork.com. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong 04 EN 0 40

https://www.ankerjapan.com JP 05 06 JP 0 C 40 C

SC 07 CCC

Anker https://support.ankerwork.com 610 13 1318-19 08 SC SJ/T 11364 GB/T 26572 GB/T 26572 SC 09

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Agent Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: AnkerWork SR500 Speakerphone Model Number(s): A3311 Product Description: AnkerWork SR500 Speakerphone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Louis Qi Title:

General Manager Company: Anker Innovations Limited Date: Sep. 27, 2022

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Long/Short-term Confidentiality Request Federal Communications Commission 445 12th Street SW Washington, DC 20554 FCC ID:

2AOKB-A3311 To Whom it may concerns, Date: Sep. 27, 2022 Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operational Description Parts List Tune-Up Info Antenna Specification_Confidential In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure for an initial period of 180 days until:

not applicable External Photos Internal Photos Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Signatory Contact person: Louis Qi Title: General Manager