FCC ID: 2AOKB-T7200 eufy Pet Camera Lite N140 / Dog Camera D605

QUICK START GUIDE Dog Camera D605 /

eufy Pet Camera Lite N140 Anker Innovations Limited. All rights reserved. eufy Pet and eufy Pet Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005002903 V3 English 01 07 13 1 PRODUCT OVERVIEW 1 2 3 4 5 7 6 9 10 8 1 Treat Container Lid 7 2 Camera 3 Speaker 4 Microphone 5 Treat Launching Port 6 Residue Lid 8 9 10 Status LED Blue: Connected. Flashing red: Disconnected. Flashing blue: Connecting / Someone is watching live video / Recording a video. Green: Starting or restarting the system. Green for 10 seconds: Launching treats. Treat Container SYNC Button Release Button: Press and hold to take out the treat container. EN 01 POWERING 2 3 ADDING TO EUFY PET APP Connect the device to power with the power port on the bottom. 1. Download and install the eufy Pet app, then sign up for an account. 2. Scan the QR Code on the bottom using the eufy Pet app and follow on-screen instructions to complete the setup. 02 EN EN 03 Scan QR CodeScan the QR code on the device.Select Device Manually9:4 19:4 1eufy PetAdd Device 4 REGULAR MAINTENANCE Clean treat container regularly. Remove residue regularly: remove the lid and pour out residue. NOTICE 5 The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0C to 40C (32F to 104F). When supplying, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to supply the device in an environment with a temperature that ranges from 5C~25C (41F to 77F). Please ensure to use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the projecter and the guarantee article. The adapter is for indoor use only. The rated output voltage/current of the adapter is 12VDC/2A for T7200 and 12VDC/1A for T7203. The plug of adapter considered as disconnect device. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Notice (United States Of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 04 EN EN 05 determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. 1 FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone:1-800-988-7973 9 10 8 1 2 3 4 5 7 6 1 2 3 4 5 6 7 06 EN JP 07 2 3 08 JP JP 09 Scan QR CodeScan the QR code on the device.Select Device Manually9:4 19:4 1eufy PetAdd Device 4 5 10 JP JP 11 1 2 3 4 5 7 6 1 1 2 3 4 5 6 7 8 9 10 9 10 8 KO 13 2 DOG CAMERA D605 /

eufy Pet Camera Lite N140 EUFY PET 3 DOG CAMERA D605 / eufy Pet Camera Lite N140 1.eufy Pet 2.eufy Pet 14 KO KO 15 Scan QR CodeScan the QR code on the device.Select Device Manually9:4 19:4 1eufy PetAdd Device 4 5

: T7200

: R-C-AIl-T7200

: Anker Innovations Limited

: 2022.10

. 16 KO KO 17

Customer Service |

Warranty |

12-month limited warranty |

Call Us |

United States

+1 (800) 988 7973 United Kingdom

+44 (0) 1604 936 200 Germany

+49 (0) 69 9579 7960

Email Us |

Customer Support: support@eufylife.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial

@EufyOfficial

@EufyOfficial

Anker Innovations Limited. All rights reserved. eufy Pet and eufy Pet Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. QUICK START GUIDE Dog Camera D605 1 PRODUCT OVERVIEW 1 2 3 4 6 7 5 9 10 8 1 Treat Container Lid 7 2 Camera 3 Speaker Status LED Blue: Connected. Flashing red: Disconnected. Flashing blue: Connecting / Someone is watching live video / Recording a video. Green: Starting or restarting the system. Green for 10 seconds: Launching treats. 4 Microphone Treat Container: Suits dog treats less than 20 mm. 5 Treat Launching Port SYNC Button 6 Residue Lid Release Button: Press and hold to take out the treat container. 8 9 10 English 01 2 POWERING DOG CAMERA D605 Connect Dog Camera D605 to power with the power port on the bottom. 02 English 3 ADDING TO EUFY PET APP 1. Download and install the eufy Pet app, then sign up for an account. 2. Scan the QR Code on the bottom using the eufy Pet app and follow on-screen instructions to complete the setup. English 03 Scan QR CodeScan the QR code on the device.Select Device Manually9:4 19:4 1eufy PetAdd Device 4 REGULAR MAINTENANCE Clean treat container regularly. Remove residue regularly: remove the lid and pour out residue. 04 English NOTICE 5 The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0C to 40C (32F to 104F). When supplying, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to supply the device in an environment with a temperature that ranges from 5C~25C (41F to 77F). Please ensure to use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the projecter and the guarantee article. This adapter is for indoor use only. The rated output voltage/current of the adapter is 12VDC/2A. The plug of adapter considered as disconnect device. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the English 05 equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in ixed / mobile exposure condition. The min separation distance is 20 Cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 Telephone: 1-800-988-7973 06 English Customer Service Warranty 12-month limited warranty Call Us United States

+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom

+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany

+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 Email Us Customer Support: support@eufylife.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial

@EufyOfficial

@EufyOfficial English 07

Anker Innovations Limited Letter of Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: Dog Camera D605 Model Number(s): T7200 Product Description: Dog Camera D605 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

louis Qi Title:

Manager Company: Anker Innovations Limited Date: 2021-09-16

Anker Innovations Limited Agent Authorization Letter

(2022-11-03) RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, authorize Micom Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. This agreement expires one year from the current date. Sincerely, louis Qi/Manager Company Name: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6201101.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Anker Innovations Limited Date Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request of Class II Permissive Change Company name: Anker Innovations Limited FCC ID: 2AOKB-T7200 FCC Part 15 Certification Gentlemen, This is to request a Class II Permissive Change for FCC ID: 2AOKB-T7200 originally granted on 09/17/2021 for adding one more model T7203 which is based on T7200 to 1. Reduce one motor (motor) and remove its small drive plate;

2. Replace the motor drive chip and delete the shield cover on the drive chip. The drive chip and layout inside the shield cover have changed, and the PCB layout outside the shield cover of the drive chip has not changed at all. 3. Main board: The memory chip is changed from 16G to 4G. The version number of the main board layout may change. The pin pin encapsulation of the chip is the same, and the circuit will not change, just change a chip;

4. For other three motors (motors), add one more source for each motor;

5. Replace the shell with other HB materials;

6. Replace a certified adapter (12V/1A) for T7203 7. Report one more graphic sensor, pin to pin, same specification, no difference in appearance, no change in layout 8. The wireless part has not changed 9. Change rating to DC 12V 1A for T7203 10. Increase crystal oscillator manufacturers version01 If you have any questions regarding this application, please feel free to contact Contact name louis Qi Company name Anker Innovations Limited Phone No.:

+ 86-13652441319 Sincerely, Signature

[louis Qi]

[Manager Anker Innovations Limited version01

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AOKB-T7200 Anker Innovations Limited Date: 2022-11-03 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: louis Qi Title: Manager

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AOKB-T7200 Anker Innovations Limited Date: 2021-09-16 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: louis Qi Title: Manager