FCC ID: 2AOKB-T8425 Floodlight Cam E340

QUICK START GUIDE Floodlight Cam E340 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005004126 V1 SAFETY INSTRUCTIONS This equipment is not suitable for use in locations where children are likely to be present. This equipment is not intended for use by children. CET QUIPEMENT NE CONVIENT PAS UNE UTILISATION DANS DES ENDROITS O DES ENFANTS SONT SUSCEPTIBLES DTRE PRSENTS. CET QUIPEMENT NEST PAS DESTIN TRE UTILIS PAR DES ENFANTS. Do not use the product in any way other than described herein in order to avoid personal injury or property damage. Nutilisez pas le produit dune autre manire que celle dcrite dans les prsentes afin dviter des blessures corporelles ou des dommages matriels. User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances. Lutilisateur doit se conformer aux lois et rglementations des pays et rgions correspondants o lquipement est situ

(utilis), respecter lthique professionnelle, prter attention aux obligations de scurit et interdire strictement lutilisation de nos produits ou quipements des fins illgales. Notre socit ne sera en aucun cas responsable de la responsabilit lgale des contrevenants. An appropriate disconnect device shall be provided as part of 01 the building installation An all-pole mains switch in accordance with Annex L shall be incorporated in the electrical installation of the building Un dispositif de dconnexion appropri doit tre prvu dans le cadre de linstallation du btiment. Un interrupteur secteur tous ples conforme lannexe L est incorpor dans linstallation lectrique du btiment The luminaire internded to be mounted on or over an outlet box and shall be provided with supply conductors long enough to extend 150mm(6 in) into the outlet box. Le luminaire doit tre mont sur ou au-dessus d'une bote de sortie et doit tre fourni avec des conducteurs d'alimentation suffisamment longs pour s'tendre de 150mm (6po) dans la bote de sortie. Caution, risk of electric shock Attention, risque de choc lectrique THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED CE PRODUIT DOIT TRE INSTALL SELON LE CODE DINSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHRENTS MIN 90C SUPPLY CONDUCTORS LES FILS DALIMENTATION 90C MIN 02 WHAT'S IN THE BOX AT A GLANCE Floodlight Cam E340 Model: T8425 USB Cable

(For Quick Setup Only) Mounting Bracket

(Pre-installed on Camera) Positioning Sticker Installation Hook Wall Screws

(Bag A) Base Screws

(Bag B) Bracket and Earth Screws

(Bag C) Warning Sticker Quick Start Guide WHAT YOU NEED (Not Provided)

#2 or #1 Phillips Crosshead Screwdriver 5V/1A USB Power Adapter Ladder

(If necessary) Floodlight Speaker Motion Sensor Component System Indicator Telephoto Camera Wide Angle Camera SYNC Power Input (For Quick Setup) SYNC Button microSD Card Slot Insert a microSD card* (not provided) to store recordings Mounting Bracket 03 04 Infrared Component Mounting Base

*Use at least a Class 10 microSD card with a maximum of 128 GB. SETTING UP THE SYSTEM 1. Download and install the eufy Security app, then sign in or create an account. 3. Tap + in the app and follow the in-app instructions to add the camera. My Devices 2. Power on the floodlight camera by using the USB-C charging cable and a power adapter (5V/1A, not provided). 4. Disconnect from the power adapter, then close the USB port cover. Shut power off at the breaker If you dont know where your breaker is or how to turn off power to your floodlight circuit, consult with a licensed electrician. SD Card Power SYNC The USB port cover must be closed to prevent water from entering the floodlight camera. SYNC To avoid scratching the floodlight camera, do not peel off the protective film for the time being. The floodlights will only light up when in wired power mode. The USB-

powered connection is used for setting up the camera safely inside your home. Make sure you can stream video from your floodlight camera BEFORE INSTALLATION. 05 06 PREPARING FOR INSTALLATION (IMPORTANT) Check local laws for installation If you are outside of North America, installation and wiring must be performed by a licensed electrician. Always follow code standards when installing wired connections. Shut Power Off at the Breaker INSTALLING YOUR FLOODLIGHT CAMERA Separate the Mounting Bracket Separate the mounting bracket from the camera and set it aside for later installation. Risk of Electrical Shock Turn off the power at your circuit breaker or fuse box before continuing, consult with a licensed electrician if needed. Switch on/off the lights to make sure the electricity to the installation area is shut off. Verify that the power supply is a 100~240 VAC 50/60 Hz power source. Keep the breaker off at any time during the installation process. NOTE: Do not use a dimmer switch or timer for this product. Shut power off at the OFF If you dont know where your breaker is or how to turn off power to your floodlight circuit, consult with a licensed electrician. OFF Select a Location You can mount the floodlight camera vertically on a wall or hang it from a ceiling. With the power off at the breaker, remove the existing floodlight if you have one. WARNING:

electrical shock WARNING: Risk of electrical shock Disconnect power at the fuse or circuit breaker before installing. Verify that the supply voltage is correct. Connect xture to a 100 VAC~240 VAC 50/60 Hz power source. Wall Mounting Overhang Mounting 07 Properly ground xture. 08 Always follow code standards when installing wired Always follow code standards when installing wired connections. If you are outside of North America, installation and If you are outside of North America, installation and wiring must be performed by a licensed electrician. wiring must be performed by a licensed electrician. CAUTION: Risk of re Do not install near combustible or amable surfaces. Do not install near combustible or amable surfaces. For overhang mounting, reinstall the mounting base first. Recommended Height We recommend mounting the camera 8 ft (2.44 m) above the ground to achieve up to 40 ft (12 m) of motion detection range. 8 ft (2.44 m) Up to 40 ft (12 m) 09 9 Install the Mounting Bracket 1. Run the existing wires through the hole of the junction box. 2. Hold the mounting bracket onto the junction box, align the screw holes, remove the foam from the holes, then secure the mounting bracket on the wall or ceiling with the Bracket Screws (Bag C). Wall Mounting Connect Wires 1. Hang your camera on the bracket with the provided hook while connecting the wires. UP UP Overhang Mounting 10 11 2. Separately connect the junction box's ground wire (bare copper /

green / green & yellow), live wire (black), and neutral wire (white) to the floodlight camera's ground wire (green & yellow), live wire (black), and neutral wire (white) using wire connectors, then secure the connections with a screwdriver. If the existing ground wire has been connected to the junction box, or if there is no ground wire, connect the floodlight camera's ground wire directly to the junction box or mounting plate. L G N Place the Camera on the Mounting Bracket 1. Remove the hook, snap the mounting base onto the mounting bracket, align the holes, and secure it with 2 Base Screws (Bag B). UP Never cross-connect. The wires must be connected with matching colors. If you have problems with the proper operation of the floodlight camera, consult a licensed technician. 2. Remove the label and protective film from the floodlight. Clean the camera with a lens cleaning cloth. 12 13 ADJUSTING THE LIGHTING ANGLE Manually pull up and down or left and right to adjust the floodlight vertically or horizontally. RESTORING POWER 1. Switch on the main circuit breaker in the house. ON ON In case the floodlight camera is not powered on, switch off the circuit breaker before checking the wiring of the floodlight camera. 2. Now you can access various features and change settings in the eufy Security app. For troubleshooting, check the Help section in the eufy Security app. LED LIGHT GUIDE Solid Violet System is initializing Solid Blue Working normally or ready for setup Blinking Red Not connected to the internet Solid Red Recording or the live stream is being viewed Flashing Blue and Red Firmware upgrade in progress Note: Keep the camera connected to a power source 14 15 NOTICE NOTICE (United States of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone:1-800-988-7973 NOTICE (Canada) IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1)this device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1)l'appareil nedoit pas produire de brouillage, et

(2)l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. 5150~5250 MHz can be used indoor only. 5150~5250 MHz peut tre utilis l'intrieur uniquement. 16 17 NOTICE (Australia) Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for the device and accessories is -20C to 40C. It is recommended to supply the device in an environment with a temperature that ranges from 5C~25C. When supplying, please place the device in an environment that has a normal room temperature and good ventilation. Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. 18 Customer Service 12-month limited warranty

(US) +1 (800) 988-7973

(UK) +44 (0) 1604 936200

(DE) +49 (0) 69 9579 7960

) +86 400 0550 036

) +81 03 4455 7823

(AU) +61 3 8331 4800

(Egypt) +20 8000000826

(UAE) +971 8000320817

(Kuwait) +965 22069086

(Saudi Arabia) +966 8008500030 support@eufylife.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial

@EufyOfficial

@EufyOfficial

This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Floodlight Cam E340@) SUITABLE FOR OPERATION IN AMBIENT NOTEXCEEDING 40C PEUT ETRE UTILISE A UNE TEMPERATUREAMBIANTE NEXCEDANT PAS 40C Model-18425 CAN ICES-003(B)/NMB-003(B) 1:23451-T8425 AC Input: 100-240V~ 50/60Hz 0.35A LED POWER:22W USB Input:5V=2A 10W Ta: 40C FCC ID:2AOKB-T8425 Room 1318-19,Hollywood Plaza,610NathanRoad, Mongkok,Kowloon, HongKong Anker Innovations Limited SUITABLE FOR DAMP LOCATIONS CONVIENTAUX EMPLACEMENTS HUMIDES WALL MOUNT OR COVERED CEILING MOUNT ONLY INSTALLATION MURALE OU INSTALLATION SUR PLAFOND COUVERT SEULEMENT MIN 90C SUPPLY CONDUCTORS LES FILS DALIMENT ATION 90C MIN

Attestation Letter Date: 2023-06-14 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(5)(i)(ii) Filing FCC ID:2AOKB-T8425 Anker Innovations Limited (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Anker Innovations Limited (the applicant) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature Contact Person: Louis Qi Title: Manager Company Name& Address: Anker Innovations Limited & Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong CFR 47 2.911(d)(5)(i)(ii) Attestation Letter

AnkerInnovationsLimited Add: Room 131819, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong Tel:+8675586544807 Email:Louis.qi@anker.com Date:20230614 AttestationLetter FEDERALCOMMUNICATIONSCOMMISSION AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 DearSirorMadam:

We, Anker Innovations Limited, declared that the device does not support channel 1213in2.4GHzwifibandandanynonUSchannelsinalltheoperationalmode(s)for thefollowingproduct. ThechipssupportsBluetoothBDR,EDR,BLEandWiFi,butforthisdevice,BDR,EDR andBLE2Mwasdisablebysoftware. Product:FloodlightCamE340 Model:T8425 FCCID:2AOKBT8425 Pleasecontactmeifthereisneedforanyadditionalclarificationorinformation. BestRegards, SincerelyYours, Signature:

PrintedName:LouisQi Title:Manager

Anker Innovations Limited Add: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong Tel: +86-755-86544807 Email: Louis.qi@anker.com FCC Authorization Date: 2023-06-14 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , Anker Innovations Limited, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd

(Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Louis Qi Title: Manager QA-FR-170-B

Anker Innovations Limited Add: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong Tel: +86-755-86544807 Email: Louis.qi@anker.com FCC Confidential Authorization Date: 2023-06-14 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AOKB-T8425 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, (Anker Innovations Limited) hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description U-NII Device Security Declaration The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Printed Name: Louis Qi Title: Manager QA-FR-171-A

U.S. AGENT LETTER OF ATTESTATION Date: 2023-06-14 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 2.911(d)(7) Filing FCC ID:2AOKB-T8425 Anker Innovations Limited (the Applicant) certifies that, as of the date of the filing of the application, Fantasia Trading LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Anker Innovations Limited (the Applicant) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Fantasia Trading LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 United States FRN: 0033423005 Tel.: +1 (800)988 7973 Email: louis.qi@anker-in.com Signed by (printed name): Louis Qi Signature:

Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong FRN: 0027073105 Tel: +86-755-86544807 Email: Louis.qi@anker.com Signed by (printed name): Louis Qi Signature: