FCC ID: 2AOKB-D2426 Nebula Capsule 3 Laser

For a detailed user manual and more information, scan the QR code or visit:

support.seenebula.com/s support@seenebula.com support@anker.com () support.mea@seenebula.com

(For Middle East and Africa Only) CED-CN@anker.com

+1 (800) 988 7973 (US/Canada)

+44 (0) 1604 936200 (UK)

+49 (0) 69 9579 7960 (DE)

+971 42428633 (Middle East & Africa)

+971 8000320817 (UAE)

+966 8008500030 (KSA)

+965 22069086 (Kuwait)

+20 8000000826 (Egypt)

+61 3 8331 4800 (AU)

+90 (850) 460 14 14 (TR)

+8 (800) 511-86-23 (RU)

+86 400 0550 036 03 4455 7823

+82 02-1670-7098 (

+91 18003138831 (India) Anker Innovations Limited. All rights reserved. NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. Model: D2426 51005003592 V01 User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances. Warning:

Replacement of a battery with an incorrect type that can defeat a safeguard;

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas;

and A battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas. Attention:

Remplacement dune batterie par un type incorrect pouvant supprimer une protection;

Mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement mcanique ou coupure dune batterie, susceptible de provoquer une explosion;

Maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inammables; et Batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inammables. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ATTENTION RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACE PAR UN TYPE INCORRECT. LIMINER LES BATTERIES USES SELON LES INSTRUCTIONS. Notice (Europe and United Kingdom) This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site https://uk.seenebula.com/. This product complies with the radio interference requirements of the United Kingdom. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.seenebula.com/. The suitable temperature range for the projector and its accessories is 0C-25C. The adapter is for indoor use only. The adapter type is PN453I (with rated output voltage / current of 5VDC/3A or 9VDC/3A or 12VDC/3A or 15VDC/3A or 20VDC/2.25A) or A2713 (with rated output voltage /

current of 5VDC/3A or 9VDC/3A or 15VDC/3A or 20VDC/3.25A). RF exposure information The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Frequency bands and power as below:

Function Bluetooth

(Projector) Bands Operation Frequency Max.Power 2.4 GHz 2402-2480 MHz EIRP 13.58dBm 2.4 GHz 2412-2472 MHz EIRP 19.8dBm WIFI

(Projector) 5 GHz 5150-5250 MHz 5250-5350 MHz EIRP 22.32dBm EIRP 19.7 dBm 5470-5725 MHz EIRP 19.96 dBm 5725-5850 MHz EIRP 13.93 dBm Bluetooth

(Remote Control) 2.4 GHz 2402-2480 MHz EIRP 8.0 dBm 5150~5350 MHz can be used indoors only. AT BE BG HR CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK The following importer is the responsible party (contract for EU matters):

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract for UK matters):

Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Notice (United States of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. 5150~5350 MHz can be used indoors only FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in xed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: 1-800-988-7973 Notice (Canada) IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1) l'appareil nedoit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps an de vous conformer aux exigences en matire d'exposition RF. 5150~5250 MHz can be used indoors only. 5150~5250 MHz peut tre utilis l'intrieur uniquement. Notice (Republic of Korea)

: D2426

: R-C-AIl-D2426

) Anker Innovations Limited 2022.09

. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. HDMI, and HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong RG1 IEC 62471-5:2015 Complies with IEC 60825-1:2014 Class 1 and IEC 62471-5:2015 Risk Group 1 11 12 13 14 15 16 17 18 Lorem ipsum Nebula Capsule 3 Laser Quick Start Guide Important Safety Instructions Due to the enclosure material, the product must only be connected to a USB 2.0 or higher. The adapter shall be installed near the product and shall be easily accessible. Please ensure you use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the product and the guarantee article. Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments. It is recommended to supply the product in an environment with a temperature that ranges from 5C-25C. ventilation. operating beam. servicing. When supplying, place the device in an environment that has a normal room temperature and good Possibly hazardous optical radiation emitted from this product may be harmful to the eyes. Do not stare at Potential hazards may exist during lamp or product Service shall be performed only by authorized, trained servicing, trained servicing personnel. Do not open the enclosure of the product. When the enclosure of the product is damaged, please do not use it anymore. Do not open the enclosure of laser module inside the When the enclosure of laser module inside the product is damaged, please do not use it anymore. Laser inside, be aware of the risk of skin or corneal product. burns. Do not use the product in any way other than described herein in order to avoid personal injury or property damage. Replacement of a battery with an incorrect type that Declaration of Conformity User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances. Warning:

can defeat a safeguard;

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas;

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable and liquid or gas. Attention:

Remplacement dune batterie par un type incorrect pouvant supprimer une protection;

Mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement mcanique ou coupure dune batterie, susceptible de provoquer une explosion;

Maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inammables; et Batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inammables. between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Frequency bands and power as below:

5150~5350 MHz can be used indoors only. The following importer is the responsible party (contract for EU matters):

Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Notice (Europe and United Kingdom) Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site https://uk.seenebula.com/. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.seenebula.com/. accessories is 0C-25C. The adapter is for indoor use only. The adapter type is PN453I (with rated output voltage / current of 5VDC/3A or 9VDC/3A or 12VDC/3A or 15VDC/3A or 20VDC/2.25A) or A2713 (with rated output voltage /

current of 5VDC/3A or 9VDC/3A or 15VDC/3A or 20VDC/3.25A). RF exposure information The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm The suitable temperature range for the projector and its for UK matters):

Notice (United States of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada Anker Innovations Limited licence-exempt RSS standard(s). Operation is subject to 2022.09 FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in xed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: 1-800-988-7973 Notice (Canada) IC Statement the following two conditions:

1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. suivantes:

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions 1) l'appareil nedoit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement requirements. When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps an de vous conformer aux exigences en matire d'exposition RF. 5150~5250 MHz can be used indoors only. 5150~5250 MHz peut tre utilis l'intrieur uniquement. Notice (Republic of Korea)

. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. HDMI, and HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong RG1 IEC 62471-5:2015 Complies with IEC 60825-1:2014 Class 1 and IEC 62471-5:2015 Risk Group 1 At a Glance 1. Front View Lens Camera for autofocus and auto keystone correction 3. Top View Remote Control 1. Overview Adjust focus Volume up /

down buttons Confirmation button Return button Navigation buttons Navigation 2. Rear View 4. Bottom View Return to the previous menu Speaker AUX-OUT socket Infrared receiver Mode button Power button USB-C port HDMI port 1 1/4" tripod socket Remote Control: Nebula RC Model: D0413X 2 3

2. Prepare the Remote Control For first-time use, slide to open the battery compartment, and install two AAA batteries. Charge Your Projector For first-time use, fully charge the built-in battery using the provided adapter. Enable Autofocus Slightly move the projector to enable autofocus and auto keystone correction. Press to enable autofocus. T Make sure Nebula Capsule 3 Laser and your phone are connected to the same wireless network. 3. Play Through External Sound Devices Connect to external sound output devices, including headphones and speakers. Use as a Bluetooth Speaker Press to switch to Bluetooth speaker mode and select Nebula Capsule 3 Laser to connect. Power on / off Press to activate Google Assistant Confirm a selection /

pause / resume Access more options Access the home menu Volume up / down 2 To replace the batteries, slide off the battery compartment backplate, insert new batteries (matching the polarity (+/-) as indicated), and close the battery compartment. Basic Setup For first-time use, follow the on-screen instructions to complete the basic setup. Adjust settings in the projector's Settings menu if necessary. Power On Press and hold for 3 seconds to power on the projector. Use as a Projector 1. Screen Mirroring Wirelessly cast movies, games, and music from your phone to Nebula Capsule 3 Laser. Play a video clip on your phone and tap the 1 cast icon on the video screen. Select the device D2426. The projector will 2 mirror the screen of the connected phone. 3 ON

< Settings Bluetooth Bluetooth DEVICE Nebula Capsule 3 Laser Connected 1 Pairing Connected

(not included) 2. Play from HDMI Playback Devices Connect to HDMI playback devices such as a TV box, TV stick, DVD player, set-top box (STB), or gaming consoles. 4. Play from a USB Drive Connect to a USB-A drive (with the USB converter) or USB-C drive to enjoy stored music, video, and pictures. Nebula Connect App Download the Nebula Connect app for the best projector experience.

(not included) USB-C Important Safety Instructions Due to the enclosure material, the product must only be connected to a USB 2.0 or higher. The adapter shall be installed near the product and shall be easily accessible. Please ensure you use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the product and the guarantee article. Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments. It is recommended to supply the product in an environment with a temperature that ranges from 5C-25C. When supplying, place the device in an environment that has a normal room temperature and good ventilation. Possibly hazardous optical radiation emitted from this product may be harmful to the eyes. Do not stare at operating beam. Potential hazards may exist during lamp or product servicing. Service shall be performed only by authorized, trained servicing, trained servicing personnel. Do not open the enclosure of the product. When the enclosure of the product is damaged, please do not use it anymore. Do not open the enclosure of laser module inside the product. When the enclosure of laser module inside the product is damaged, please do not use it anymore. Laser inside, be aware of the risk of skin or corneal burns. Do not use the product in any way other than described herein in order to avoid personal injury or property damage. 4 5 6 7 8 9 10

Nebula Capsule 3 Laser Model: D2426 Input: 5V= 3A or 9V == 3A or 12V = 3A or 15V = 3A or 20V = 2.25A USB Output 5V==2A FCC ID: 2AOKB-D2426 _ IC: 23451-D2426 CAN ICES-003(B)/NMB-003(B) Made in China Anker Innovations Limited Room 1318-19, Hollywood Plaza,610 Nathan Road, Mongkok, Kowloon, Hong Kong sen ae 5GHz product for indoor use only Fabriqu en Chine R| 201-220659 gy8: 2048 Contorme gy, wr Model Input: SV= 3Aor 9) or 15V=3Aor 20V=2, FCG ID: 2AOKB-D2426 IC: 23451-D2426 CAN ICES-003(8)/NMB-003(B) Made in China Anker Innovations Limited Plaza,610 Nathan Read,Mongkok,Kowloon,Hong Kong UK CA Nebula Capsule 3 Laser 2426 3Aor 12V 25A USB Output 5V:

Room 1318-19, Hollywood CED 1c 62471-5:2015 Para 917" Be]

5GHz product for indoor use only abriqu en Chine ee 201-220659 wwg9'29

Anker Innovations Limited Date: 2022/10/20 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Anker Innovations Limited the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Anker Innovations Limited solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AOKB-D2426 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Anker Innovations Limited in connection with the Application shall have the same effect as acts of the Anker Innovations Limited also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited

Anker Innovations Limited Date:2022/10/20 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AOKB-D2426 To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Anker Innovations Limited hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of to the Applicant and provide unjustified benefits to its competitors. these matters might be harmful We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Anker Innovations Limited temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

The Applicant understands that pursuant this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory to Rule 0.457, disclosure of PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 Description Block Diagram Operational Description Schematics BOM NII Software Security Info External Photos Internal Photos Test-Setup Photos User Manual Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited

Anker Innovations Limited UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AOKB-

D2426 IC: 23451-D2426

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz 5510 5670 MHz Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No passive scanning

(where the device is can listen only with no probes) Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. N/A

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited

Declaration To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AOKB-D2426 Don't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable Should you have any questions, please feel free to contact me. Date:2022/10/20 Signature :

Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited