FCC ID: 2AOKB-D2421X Nebula Capsule II

NEBULA For FAQs and more information, please visit:

www.SeeNebula.com 2 suppot@SeeNebulacom

& #11800) 988 7973 (US) Mor-Fri 9:00am - 5:00pm (PT) Anker Innovations Limited llrightsreserved NEBULA and the NEBULA logo are trademarks of Anker innovations Limited, registered inthe United States and other countries Model D2421 s1008001428 vos Important Safety Instructions

* Due to the enclosure material, the product must only be connected to a USB interface of version 2.0 or higher.

+ The adapter should be installed near the equipment and must be easily accessible,

+ Do not use the device in an environment where the temperature is too high or too low. Never expose the device to strong sunshine or wet environments.

+ The ideal temperature range for this product and its, accessories is 2-95 / 0-35

+ When charging, place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 41F - 77F /

5C- 25C.

* Only use the charger provided by the manufacturer. Using unauthorized chargers may cause danger and violate the authorization of the projector as well as the guarantee.

+ This charger is for indoor use only. Notice CE Tit podtet complies wih the ret neference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site https//ukseenebula. com/

UK this product complies withthe radio interference re-

(}A auirements ofthe united kingdom Declaration of Conformity Hereby, Anker Innovations Limited declares that this de-

vice isin compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity i available at the following intemet address:

https://uk.seenebula.com/

The charger type is a PN3O3E/PN303B with output of DC 15V/ 2A. The plug of the adapter is considered as the disconnect device. Once unplugged, the charger is considered as disconnected from the power source. RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 em between the device and the human body. To maintain compliance with RF exposure requirements, use products that maintain a 20m distance between the device and human body. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Wifi Operating Frequency Range: 2412~2472 MHz

(2.46); 5150~5250 MHz, 5725~5850 MHz (5G) Wifi Max Output Power: 16.86 dBm (2.46); 15.52 dBm (56) BT Operating Frequency Range: 2402~2480 MHz;

BT Max Output Power: 9.60 dBm 8150~5250 MHz can be used indoor only. The following importer is the responsible party (contract for EU matters): Anker Innovations Deutschland GmbH | Georg-Muche-

Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract for UK. matters): Anker Technology (UK) Limited | GNRB, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Your product is designed and manufactured with Qa eee can be recycled and reused This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. FCC Statement This device complies with Part 1 of the FCC Rules Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warming: Changes or modifications not expressly approved by the party responsible for compliance could Void the user's authority to operate the equipment, Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against, harmful interference in a residential installation. against harmful interference in a residential installation, This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, hich can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient ar relocate the receiving antenna,

+ Increase the separation between equipment and receiver.

+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

+ Consult the dealer or an experienced radio/TV technician for help, RF Exposure Information(SAR) The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue, Device type 2421 (FCC ID:

2AOKB-02421X ) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is0.093. W/kg. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone:1-800-988-7973 10 To get the full user manual, visit the website www.seenebula.com/downloads Um eine vollstandige Bedienungsanleitung zu erhalten, besuchen Sie die Website www seen-

ebula.com/downloads Pour obtenir un manuel d'utilisation complet, visitez le site Web www.seenebula.com/down-

loads Para obtener un manual de usuario completo, visite el sitio web:wwwseenebula.com/down-

loads Per ottenere un manuale utente completo, visitare il sito Web: www.seenebula.com/down-

loads Para obter um manual completo do usurio, voc pade obt-lo no aplicativo ou no aplicativo Nebula Connect: www. seenebula.com/downloads Om een volledige gebruikershandleiding te krijgen, kunt u deze verkrijgen via de Nebula Connect APP of website: www.seenebula.com/downloads www.seenebula.com/downloads:

Cs) St Se Ld Stee Lb gle penal 2thtt AAS At BMS YO7PH Nebula Connect APP EE BAMO|EOLM G2 4 QISLIch:

www.seenebula.com/downloads Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong u 12 NEBULA by Anker Nebula Capsule II Quick Start Guide Overview 1. Front View e>

Lens 2.Rear View Mode switch button /

Bluetooth speaker on/

off button AUX-out socket HDMI input port Air ventilation

(inlet) Air ventilation

(outlet) Infrared receiver Power button ee r Speaker Ser

}_USB-C port

(only for recharging) USB-A port 3. Top View Volume up /

down buttons Confirmation button Return button AN) >*Navigation 4, Bottom View buttons 5. Remote Control LED indicator Power on / t off button Navigation |

buttons Return button Volume up /

down buttons

|_ Microphone T~ Source switch button

+~ Confirmation button

}The Google Assistant button

+Home button Note:

Press and hold the @ for 2 seconds to engage autofocus. The @ can be used only when the remote control is paired with the projector via Bluetooth. Getting Started

@ For first-time use, fully charge the built-in battery by using the provided cable and charger.

@ Siide off the battery cover and install 2 AAA batteries before using the remote control for the first time. Make sure the positive and negative ends are facing the correct polarity direction as marked in the battery compartment Hold Oon the projector for 2 seconds to power on the projector. Eee Slightly move the projector to engage autofocus

@ For first-time use, follow the on-screen instructions to complete the basic set-up. Adjust settings in the projector's Settings menu if necessary. Using the Nebula Capsule II Install Netflix and Prime Video

@ Download Nebula Manager from your Nebula Capsule II's Google Play store. With Nebula Manager, you can download and install apps such as Netflix, Prime Video, and more.

@ Follow the on-screen instructions to install Netflix and Prime Video. Install Nebula Connect App To control the projector, download the Nebula Connect app from your phone's App Store (iOS devices) or Google Play (Android devices). Make sure your phone and Nebula Capsule Il are connected to the same wireless network

}ownload

@ App Store GETITON Google Play

Nebula Capsule II Model: D2421 Rated Input 1SV===2A Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong SGHz is for indoor use only 201-210256

Made in China FCC ID: 2AOKB-D2421X HEQce Nebula Capsule II Model: D2421 Rated Input 1SV===2A Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong SGHz is for indoor use only 201-210256 Made in China FCC IK 2AOKB-D2421X HERCES

Anker Innovations Limited Date: 2022/7/4 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Anker Innovations Limited the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Anker Innovations Limited solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AOKB-D2421X including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Anker Innovations Limited in connection with the Application shall have the same effect as acts of the Anker Innovations Limited also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited

Anker Innovations Limited Date:2022/07/04 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AOKB-D2421X To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Anker Innovations Limited hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of to the Applicant and provide unjustified benefits to its competitors. these matters might be harmful We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Anker Innovations Limited temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

The Applicant understands that pursuant this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory to Rule 0.457, disclosure of PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 Description Block Diagram Operational Description Schematics BOM Tune up procedure External Photos Internal Photos Test-Setup Photos User Manual Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited

Anker Innovations Limited UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AOKB-D2421X

(1) DFS Device --

Master, Client without radar detection capability, Client with Radar detection capability , N/A

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) 2412 2462 MHz 2422 2452 MHz 5745 5825 MHz 5755 5795 MHz 5180 5240 MHz 5190 5230 MHz 5260 5320 MHz 5270 5310 MHz 5500 5700 MHz 5510 5670 MHz Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No passive scanning

(where the device is can listen only with no probes) Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Ad Hoc Mode capability Access point capability Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, Yes, No No No No No No No No No No

(3) Country code selection ability -

If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. Yes , No

(4) Meet 15.202 requirement -

pls check below :

Yes , No , A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. N/A

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited

Declaration To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AOKB-D2421X Don't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable Should you have any questions, please feel free to contact me. Date:2022/7/4 Signature :

Contact name: Louis Qi Tel: +86-13652441319 Email: louis.qi@oceanwing.com Company name : Anker Innovations Limited