For a detailed user manual and more information, scan the QR code or visit:
support.seenebula.com/s support@seenebula.com support@anker.com () support.mea@seenebula.com
(For Middle East and Africa Only) CED-CN@anker.com
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036 03 4455 7823
+82 02-1670-7098 (
+91 18003138831 (India) Anker Innovations Limited. All rights reserved. NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. Model: D2333 5100500XXXX V01 Use as a Bluetooth Speaker Press to switch to Bluetooth speaker mode and select Nebula Mars 3 to connect. 1 Pairing Connected
< Settings Bluetooth Bluetooth DEVICE Nebula Mars 3 Connected Nebula Connect App Download the Nebula Connect app for the best projector experience. Important Safety Instructions For pluggable equipment, the socket-outlet shall be easily accessible. Please ensure you use only the adapter offered by the manufacturer. Using an unauthorized adapter may be dangerous and violate the Terms of Use and product warranty. Do not use the product in an environment where the temperature is too high or too low. Never expose the product to strong sunshine or wet environments. It is recommended to supply the product in an environment with a temperature that ranges from 5C~25C / 41F~77F.. When supplying power, place the device in an environment that has a normal room temperature and good ventilation. Do not use the product in any way other than described herein in order to avoid personal injury or property damage. User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances. Warning:
Replacing a battery with an incorrect type may defeat safeguards and create danger;
Disposal of the battery / device in a re or a hot oven or other source of signicant heat, or mechanically crushing, or cutting of the battery / device, may result in an explosion;
Leaving the battery / device in an extremely hot environment may result in an explosion or leakage of ammable liquids or gases;
The battery / device subjected to extremely low air pressure may result in an explosion or leakage of ammable liquids or gases. Attention:
Le remplacement dune batterie par un type incorrect peut annuler les protections et crer un danger;
La mise au rebut de la batterie/du dispositif dans un feu, un four chaud ou toute autre source de chaleur importante, ou lcrasement mcanique ou le dcoupage de la batterie/du dispositif, peut entraner une explosion;
Laisser la batterie/le dispositif dans un environnement extrmement chaud peut entraner une explosion ou une fuite de liquides ou de gaz inammables;
La batterie / le dispositif soumis une pression dair extrmement faible peut entraner une explosion ou une fuite de liquides ou de gaz inammables. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ATTENTION RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACE PAR UN TYPE INCORRECT. LIMINER LES BATTERIES USES SELON LES INSTRUCTIONS. Notice (Europe and United Kingdom) Frequency bands and power as below:
This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the Declaration of Conformity, visit the Web site https://uk.seenebula.com/. This product complies with the radio interference requirements of the United Kingdom. Declaration of Conformity Hereby, Anker Innovations Limited declares that this device is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of conformity is available at the following internet address: https://uk.seenebula.com/. The suitable temperature range for the projector and its accessories is 0C~35C / 32F~95F. The adapter is for indoor use only. The adapter type is NSA180EC-19094701 or KA180B-19009470H with rated output voltage / current of 19.0VDC / 9.47A. RF exposure information The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. Function Bluetooth
(Projector) Bands Operation Frequency Max.Power 2.4 GHz 2402-2480 MHz EIRP 16.61 dBm 2.4 GHz 2412-2472 MHz EIRP 19.51 dBm WIFI
(Projector) 5 GHz 5150-5250 MHz 5250-5350 MHz EIRP 20.13 dBm EIRP 18.70 dBm 5470-5725 MHz EIRP 17.89 dBm 5725-5850 MHz EIRP 13.16 dBm Bluetooth
(Remote Control) 2.4 GHz 2402-2480 MHz EIRP 3.62 dBm 5150~5350 MHz can be used indoors only. AT BE BG HR CY CZ DK EE FI FR DE EL HU IE IT LV LT LU MT NL PL PT RO SK SI ES SE UK The following importer is the responsible party (contract for EU matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany The following importer is the responsible party (contract for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Notice (United States of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in xed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: 1-800-988-7973 5150~5350 MHz can be used indoors only. Notice (Canada) IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1) l'appareil nedoit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps an de vous conformer aux exigences en matire d'exposition RF. 5150~5250 MHz can be used indoors only. 5150~5250 MHz peut tre utilis l'intrieur uniquement. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. HDMI, and HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong 9 10 11 12 13 14 15 16 3. Top View Remote Control At a Glance 1. Front View Sensors (for autofocus and auto keystone correction) Handle Lens Lens cover Loudspeaker Volume up /
down buttons Return button Bluetooth speaker button Navigation /
confirmation button 2. Rear View 4. Bottom View LED screen DC IN port USB-C port Ambient light USB-A port Power mode button Reset button Ambient light button AUX-OUT socket HDMI port Air ventilation (outlet) Adjustable stand Air ventilation (inlet) Nebula Mars 3 Quick Start Guide 1 2 3 1. Overview Adjust focus Navigation Return to the previous menu Power on / off Press to activate Google Assistant Confirm a selection /
pause / resume Access more options Access the home menu Volume up / down Nebula RC Model: D0413X 2. Prepare the Remote Control Before using for the first time, slide to open the battery compartment, and install two AAA batteries. Charge Your Projector Before using for the first time, fully charge the built-in battery using the provided adapter.The LED screen will light up when the battery is charged. DC IN Autofocus and Auto Keystone Correction Slightly move the projector to enable autofocus and auto keystone correction. Press to enable autofocus. Basic Setup For first-time use, follow the on-screen instructions to complete the basic setup. Adjust settings in the projector's Settings menu if necessary. T Make sure Nebula Mars 3 and your phone are connected to the same wireless network. 3. Play Through External Sound Devices Connect to external sound output devices including headphones and speakers.
(not included) 2 To replace the batteries, slide open the battery compartment, insert new batteries
(matching the polarity (+/-) as indicated), and close the battery compartment. Power On Slide the lens cover down to turn on the projector, and slide up to turn it off. Use as a Projector 1. Screen Mirroring OFF ON Wirelessly cast movies, games, and music from your phone to Nebula Mars 3. Play a video clip on your phone and tap the 1 cast icon on the video screen. Select the device D2333. The projector will 2 mirror the screen of the connected phone. 2. Play from HDMI Playback Devices Connect to an HDMI playback device such as a TV box, TV stick, DVD player, set-top box (STB), or games console. 4. Play from a USB Drive Connect to a USB-A or USB-C drive to enjoy stored music, video, and pictures.
(not included) USB-C USB-A
4 5 6 7 8