FCC ID: 2AOKBA2573 PowerWave 10 Stand with 2 USB-A Ports

For FAQs and more information, please visit:

https://www.anker.com/support A2573 5100500xxxx V01 EN LED Indicator Solid blue for 3 seconds, then off Solid blue Flashing blue Flashing green Status Connected to power Charging mobile device Metal or abnormal objects detected Overvoltage protection, indicating you need to switch to a 12V 3A DC adapter You cannot charge your device wirelessly in these scenarios:

T O using a case with a magnetic/iron plate;

O using a case with a pop socket;

O using an ultra-thick (> 5 mm) protective phone case. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25C / 77F. Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be. Important Safety Instructions Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. 01 This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave 10 Stand with 2 USB-A Ports Model: A2573 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong 02 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Specifications Input 12V 3A Wireless Output 5W / 7.5W / 10W USB Output 5V 2.4A (Max) Size Weight 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2573 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong DE LED-Anzeige Leuchtet 3 Sekunden lang blau, dann aus Leuchtet blau Blinkt blau Blinkt grn Status An Stromversorgung angeschlossen Gert ldt Metall- oder abnormale Gegenstnde erkannt berspannungsschutz, zeigt an, dass Sie auf einen 12 V 3 A Gleichstromadapter wechseln mssen T Sie knnen Ihr Gert in den Folgenden Situationen nicht kabellos laden:

O Wenn Sie eine Hlle mit einer magnetischen/Eisenplatte verwenden;

O Wenn Sie eine Hlle mit einem Popsocket verwenden;

O Wenn Sie eine ultradicke (> 5 mm) Schutzhlle verwenden. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des kabellosen Ladegerts, einschlielich Metallunterlagen bei einer Autohalterung, Kreditkarten, Trschlssel, Mnzen, Metall oder NFC-Karten, da dies dazu fhren kann, dass das kabellose Aufladen fehlschlgt oder das Gert berhitzt. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen reduzieren die Ladegeschwindigkeit und schrnken die Leistung ein. Dies ist unter kabellosen Ladegerten ein weit verbreitetes Phnomen. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 25 C laden. Die Schutzhlle und die Position Ihres Gertes auf dem kabellosen Ladegert beeinflusst die Ladegeschwindigkeit. Je weiter es von der Mitte des kabellosen Ladegerts entfernt platziert ist, desto langsamer ist die Ladegeschwindigkeit. 03 04 Wichtige Sicherheitsinformationen Nicht fallenlassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Zum sichersten und schnellsten Laden nur Original- oder zertifizierte Kabel verwenden. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Technische Daten Eingang 12V 3A Kabelloser Ausgang 5W / 7,5W / 10W USB-Ausgang Abmessungen Gewicht 5V 2,4A (Max) 204,6 x 92,0 x 14,8 mm 185 g ES Indicador LED Azul fijo durante 3 segundos, despus se apaga Azul fijo Parpadeo azul Verde intermitente Estado Conectado a la alimentacin Cargando dispositivo mvil Se han detectado objetos metlicos o extraos Proteccin de sobretensin, que indica que debe cambiar al adaptador de CC de 12 V/3 A T El dispositivo no se podr cargar de forma inalmbrica en los siguientes casos:

O Cuando se utilice una carcasa con una placa magntica o de hierro. O Cuando se utilice una carcasa con una empuadura plegable de tipo popsocket. O Cuando se utilice una carcasa protectora muy gruesa (>5 mm). No coloque ningn objeto extrao entre el dispositivo y la superficie del cargador inalmbrico (incluyendo placas metlicas de un soporte para el coche, tarjetas de crdito, llaves, monedas, metales o tarjetas NFC), ya que esto podra provocar errores de carga inalmbrica o sobrecalentamiento. Los cargadores inalmbricos proporcionan una mayor comodidad que los cargadores por cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que los cargadores por cable. Las temperaturas elevadas reducirn la velocidad de carga y limitarn la potencia, un fenmeno comn a todos los cargadores inalmbricos. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 25 C (77 F). Tanto la carcasa protectora del telfono como la posicin del dispositivo afectarn a la velocidad de carga. Cuanto ms alejado se encuentre el dispositivo del centro del cargador, ms lenta ser la velocidad de carga. 05 06 Instrucciones de seguridad importantes Evite las cadas. No desmonte el producto. No lo exponga a lquidos. Para cargar de la forma ms rpida y segura, utilice cables originales o certificados. Este producto solo es adecuado para climas moderados.La temperatura ambiente mxima durante el uso de este producto no debe superar los 40C. No se deben colocar fuentes de llama desprotegidas, como velas, sobre este producto. Utilice solo un pao o cepillo seco para limpiar este producto. Especificaciones Entrada Salida inalmbrica Salida USB Tamao Peso 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz FR Indicateur LED Bleu fixe pendant 3secondes, puis s'teint Bleu fixe Bleu clignotant Vert clignotant tat En tension Appareil mobile en charge Objets mtallique ou irrgulier dtects Protection contre la surtension indiquant que vous devez utiliser un adaptateur 12 V 3 A CC T Vous ne pouvez pas charger votre appareil sans fil lors des situations suivantes :

O Utilisation d'un tui avec une plaque magntique/en fer O Utilisation d'un tui avec un PopSockets O Utilisation d'un tui ultrapais (> 5 mm) Afin d'viter toute surchauffe ou dfaillance de chargement, ne placez pas de corps trangers entre votre appareil et la surface du chargeur sans fil, notamment, les plaquettes mtalliques sur un support de voiture, les cartes bancaires, les cls, les pices de monnaie, les objets mtalliques et les cartes NFC. Les chargeurs sans fil facilitent le chargement par rapport aux versions filaires traditionnelles. Nanmoins, restreint par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. Des tempratures leves rduiront la vitesse de chargement et limiteront la puissance, ce qui est un phnomne habituel tous les chargeurs sans fil. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 25 C. Le type d'tui de protection et la position de votre appareil sur le chargeur sans fil influencent la vitesse de chargement. Plus l'appareil est plac loin du centre du chargeur sans fil, plus la vitesse de chargement sera lente. 07 08 Instructions importantes de scurit Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Pour obtenir la charge la plus sre et la plus rapide, utiliser des cbles d'origine ou Ce produit est adapt uniquement aux climats modrs. La temprature ambiante maximale pendant l'utilisation de ce produit ne doit pas Ce produit ne doit pas tre expos des sources de flamme nue, notamment des certifis. dpasser 40C. bougies. Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. Spcifications techniques Entre Sortie sans fil Sortie USB Taille Poids 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz Dclaration d'Industrie Canada Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. IT Indicatore LED Stato Blu fisso per 3 secondi, poi si spegne Collegato a una fonte di alimentazione Blu fisso Ricarica del dispositivo mobile Blu lampeggiante Rilevati oggetti metallici o anormali Verde lampeggiante Protezione da sovratensione indicante che necessario passare a utilizzare un adattatore da 12Vcc/3A T Non possibile caricare il dispositivo in modalit wireless nelle seguenti situazioni:

O Se si utilizza una custodia con una piastra magnetica/di ferro;

O Se si utilizza una custodia con supporto esterno (pop socket);

O Se si utilizza una custodia protettiva ultra spessa (> 5 mm). Non posizionare oggetti estranei tra il dispositivo e la superficie del caricatore wireless, inclusi placchette in metallo su supporti per auto, carte di credito, chiavi, monete, metallo o carte contactless, che potrebbero causare errori di ricarica wireless o surriscaldamento. I caricabatterie wireless rendono la ricarica pi comoda rispetto a quelli cablati. Tuttavia, sulla base dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore a quella dei caricabatterie cablati. Le alte temperature ridurranno la velocit e la potenza di ricarica. Si tratta di un fenomeno comune a tutti i caricabatterie wireless. Si consiglia di caricare il dispositivo in ambienti con temperature inferiori a 25 C. Sia la custodia protettiva del telefono sia la posizione del dispositivo sul caricatore wireless influiscono sulla velocit di ricarica. Quanto pi lontani dal centro del caricatore wireless, tanto pi lenta sar la velocit di ricarica. 09 10 Informazioni importanti sulla sicurezza Non fare cadere il prodotto. Non smontare il prodotto. Non esporre il prodotto a liquidi. Per effettuare la carica in modo rapido e sicuro, utilizzare i cavi originali o certificati. Il prodotto adatto all'utilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40 C. Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzola. Specifiche Ingresso Uscita wireless Uscita USB Dimensioni Peso 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz PT Indicador de LED Status Azul constante por 3 segundos, em seguida, desligado Azul constante Conectado energia Carregar o dispositivo mvel Luz azul piscando Metal ou objetos anormais detectados Luz verde piscando Proteo contra sobretenso, indicando que preciso alternar para um adaptador DC 12V 3A O dispositivo no pode ser carregado sem fio caso voc esteja usando:

T O Uma capa com placa magntica ou de ferro;

O Um Popsocket;

O Uma capa protetora muito espessa (mais de 5 mm). No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem fio, incluindo suportes veiculares em metal, cartes de crdito, chaves, moedas, metal ou cartes NFC pois isso far com que o carregamento sem fio falhe ou causar superaquecimento. Os carregadores sem fio tornam o carregamento mais conveniente do que os carregadores com fio, mas limitados pela tecnologia sem fio atual, sua velocidade de carregamento menor do que a dos carregadores com fio. Altas temperaturas reduziro a velocidade de carregamento e restringiro a potncia. Isso um fenmeno comum a todos os carregadores sem fio. recomendado carregar o dispositivo em ambientes com temperaturas abaixo de 25C . Tanto a capa protetora do telefone quanto a posio deste sobre o carregador sem fio afetaro a velocidade de carregamento. Quanto mais longe o dispositivo estiver do centro do carregador sem fio, mais lenta ser a velocidade de carregamento. 11 12 Instrues importantes de segurana Evite deixar cair. No desmonte. No exponha a lquidos. Para carregar com rapidez e segurana, use cabos originais ou certificados para uso. Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder 40 C. Fontes abertas com chama, como velas, no devem ficar prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto. Especificaes Entrada Sada sem fio Sada USB Tamanho Peso 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz 13 RU

( 3 ),

, 12 3 T

:

O / ;

O ;

O (> 5 ) .

,

,

, , , NFC-

, .

,

- ,

,

. 25C .

, . 14

. 40 C.

, . JP LED 3 12V 3A DC T 12V 3A 5W / 7.5W / 10W USB 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz O /

O O ( :5mm )

(:

NFC ( IC ) ) 25 C 15 16 40 USB 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz KO LED

(3)

, 12V 3A DC T

. O /

O O (> 5mm)

, ,

, , , NFC .

,

.

,

. 25C/77

. 17 18

. 40C . USB 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 5W / 7.5W / 10W 185 g / 6.5 oz 2.4A (Max) 12V 3A 5V CN LED 3 12V 3A T O /

O O > 5 NFC 25C / 77 19 20 40C USB 5W / 7.5W / 10W 185 g / 6.5 oz 2.4A (Max) 12V 3A 5V 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in TW LED 3 12V 3A DC T O /

O pop O (> 5 mm) NFC 25C / 77 21 22 40C

() USB 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 5W / 7.5W / 10W 185 g / 6.5 oz 2.4A (Max) 12V 3A 5V 23 AR 3A 12V

:

/ O pop O

.) 5 >( O NFC

. 77 / 25

. . T 24 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) USB 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz HE

,-

3 12 )DC(

)LED(

, 3 T

:

; O

; O

." 5- , O

,

,

,NFC , , ,

.

,

. ,

. ,

. 25

. 25 26

. ,

. 40C

. , ,

. ,

: /

'

.' , , .

, . "

: . ' , . :

! .

!

. , : :

, :

.

:

, . // .1

. .2

. , .3

. .4

. .5 27 12V 3A 5W / 7.5W / 10W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz USB Indoor use only. This product should not be disposed of with normal waste. It must be recycled. 28

@Anker

@Anker Japan

@Anker Deutschland

@AnkerOfficial

@Anker_JP

@Anker support@anker.com

(US) +1 (800) 988 7973 Mon-Fri 9:00am - 5:00pm (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

( ) +86 400 0550 036 9:00 - 17:30

( ) +81 03 4455 7823 - 9:00 - 17:00 Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:

JP: KO: CN:

TW: :AR :HE EN: 18-month limited warranty*

DE: 18 Monate beschrnkte Herstellergarantie*

ES: Garanta limitada de 18 meses*

FR: Garantie de 18 mois*

IT: Garanzia valida 18 mesi*

PT: 18 meses de garantia limitada RU: 18 JP: 18 KO: 18 CN: 18 TW: 18 18 :AR 18 :HE EN: Lifetime technical support DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida FR: Support technique vie IT: Assistenza post-vendita a vita PT: Suporte tcnico ao longo da vida til do produto RU:

JP:

KO:

CN: TW:

:AR

:HE

* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspflichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono influenzati dalle garanzie concesse dalla presente Garanzia limitata. 29 Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to IC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

- English: "

This device complies with Industry Canada licence-exempt RSS standard(

s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device."

- French:"

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

For FAQs and more information, please visit:

https://www.anker.com/support A2573 51005001613 V02 EN Solid blue Flashing blue Flashing green LED Indicator Status Solid blue for 3 seconds, then off Connected to power Charging mobile device Metal or abnormal objects detected Overvoltage protection, indicating you need to switch to a 12V 3A DC adapter You cannot charge your device wirelessly in these scenarios:

T O using a case with a magnetic/iron plate;

O using a case with a pop socket;

O using an ultra-thick (> 5 mm) protective phone case. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25C / 77F. Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be. Important Safety Instructions Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. 01 Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave 10 Stand with 2 USB-A Ports Model: A2573 Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 "&" RSS-Gen numro 5 mars 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

02

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. Specifications Input 12V 3A Wireless Output 5W / 7.5W / 10W / 15W USB Output 5V 2.4A (Max) Size Weight 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2573 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong DE LED-Anzeige Status Leuchtet 3 Sekunden lang blau, dann aus Gert ldt Leuchtet blau Blinkt blau Blinkt grn An Stromversorgung angeschlossen Metall- oder abnormale Gegenstnde erkannt berspannungsschutz, zeigt an, dass Sie auf einen 12 V 3 A Gleichstromadapter wechseln mssen Sie knnen Ihr Gert in den Folgenden Situationen nicht kabellos T laden:

O Wenn Sie eine Hlle mit einer magnetischen/Eisenplatte verwenden;

O Wenn Sie eine Hlle mit einem Popsocket verwenden;

O Wenn Sie eine ultradicke (> 5 mm) Schutzhlle verwenden. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des kabellosen Ladegerts, einschlielich Metallunterlagen bei einer Autohalterung, Kreditkarten, Trschlssel, Mnzen, Metall oder NFC-Karten, da dies dazu fhren kann, dass das kabellose Aufladen fehlschlgt oder das Gert berhitzt. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen reduzieren die Ladegeschwindigkeit und schrnken die Leistung ein. Dies ist unter kabellosen Ladegerten ein weit verbreitetes Phnomen. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 25 C laden. Die Schutzhlle und die Position Ihres Gertes auf dem kabellosen Ladegert beeinflusst die Ladegeschwindigkeit. Je weiter es von der Mitte des kabellosen Ladegerts entfernt platziert ist, desto langsamer ist die Ladegeschwindigkeit. 03 04 Wichtige Sicherheitsinformationen Nicht fallenlassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Zum sichersten und schnellsten Laden nur Original- oder zertifizierte Kabel verwenden. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. ES Technische Daten Eingang 12V 3A Kabelloser Ausgang 5W / 7.5W / 10W / 15W USB-Ausgang Abmessungen Gewicht 5V 2,4A (Max) 204,6 x 92,0 x 14,8 mm 185 g Indicador LED Estado Azul fijo durante 3 segundos, despus se apaga Conectado a la alimentacin Azul fijo Cargando dispositivo mvil Parpadeo azul Se han detectado objetos metlicos o extraos Verde intermitente Proteccin de sobretensin, que indica que debe cambiar al adaptador de CC de 12 V/3 A T El dispositivo no se podr cargar de forma inalmbrica en los siguientes casos:

O Cuando se utilice una carcasa con una placa magntica o de hierro. O Cuando se utilice una carcasa con una empuadura plegable de tipo popsocket. O Cuando se utilice una carcasa protectora muy gruesa (>5 mm). No coloque ningn objeto extrao entre el dispositivo y la superficie del cargador inalmbrico (incluyendo placas metlicas de un soporte para el coche, tarjetas de crdito, llaves, monedas, metales o tarjetas NFC), ya que esto podra provocar errores de carga inalmbrica o sobrecalentamiento. Los cargadores inalmbricos proporcionan una mayor comodidad que los cargadores por cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que los cargadores por cable. Las temperaturas elevadas reducirn la velocidad de carga y limitarn la potencia, un fenmeno comn a todos los cargadores inalmbricos. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 25 C (77 F). Tanto la carcasa protectora del telfono como la posicin del dispositivo afectarn a la velocidad de carga. Cuanto ms alejado se encuentre el dispositivo del centro del cargador, ms lenta ser la velocidad de carga. 05 06 Instrucciones de seguridad importantes Evite las cadas. No desmonte el producto. No lo exponga a lquidos. Para cargar de la forma ms rpida y segura, utilice cables originales o certificados. FR Indicateur LED tat Bleu fixe pendant 3secondes, puis s'teint En tension Este producto solo es adecuado para climas moderados.La temperatura ambiente mxima durante el uso de este producto no debe superar los 40C. No se deben colocar fuentes de llama desprotegidas, como velas, sobre este producto. Utilice solo un pao o cepillo seco para limpiar este producto. Bleu fixe Appareil mobile en charge Bleu clignotant Objets mtallique ou irrgulier dtects Vert clignotant Protection contre la surtension indiquant que vous devez utiliser un adaptateur 12 V 3 A CC Especificaciones Entrada 12V 3A Salida inalmbrica 5W / 7.5W / 10W / 15W Salida USB Tamao Peso 5V 2.4A (Max) 185 g / 6.5 oz 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in Vous ne pouvez pas charger votre appareil sans fil lors des situations T suivantes :

O Utilisation d'un tui avec une plaque magntique/en fer O Utilisation d'un tui avec un PopSockets O Utilisation d'un tui ultrapais (> 5 mm) Afin d'viter toute surchauffe ou dfaillance de chargement, ne placez pas de corps trangers entre votre appareil et la surface du chargeur sans fil, notamment, les plaquettes mtalliques sur un support de voiture, les cartes bancaires, les cls, les pices de monnaie, les objets mtalliques et les cartes NFC. Les chargeurs sans fil facilitent le chargement par rapport aux versions filaires traditionnelles. Nanmoins, restreint par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. Des tempratures leves rduiront la vitesse de chargement et limiteront la puissance, ce qui est un phnomne habituel tous les chargeurs sans fil. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 25 C. Le type d'tui de protection et la position de votre appareil sur le chargeur sans fil influencent la vitesse de chargement. Plus l'appareil est plac loin du centre du chargeur sans fil, plus la vitesse de chargement sera lente. Instructions importantes de scurit Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. 07 08 Pour obtenir la charge la plus sre et la plus rapide, utiliser des cbles d'origine ou Ce produit est adapt uniquement aux climats modrs. La temprature ambiante maximale pendant l'utilisation de ce produit ne doit pas Ce produit ne doit pas tre expos des sources de flamme nue, notamment des certifis. dpasser 40C. bougies. Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. IT Spcifications techniques Entre 12V 3A Sortie sans fil 5W / 7.5W / 10W / 15W Sortie USB 5V 2.4A (Max) Taille Poids 185 g / 6.5 oz 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in T Dclaration d'Industrie Canada Cet appareil est conforme la norme RSS-216 d'Industrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune interfrence nuisible. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Indicatore LED Stato Blu fisso per 3 secondi, poi si spegne Collegato a una fonte di alimentazione Blu fisso Ricarica del dispositivo mobile Blu lampeggiante Rilevati oggetti metallici o anormali Verde lampeggiante Protezione da sovratensione indicante che necessario passare a utilizzare un adattatore da 12Vcc/3A Non possibile caricare il dispositivo in modalit wireless nelle seguenti situazioni:

O Se si utilizza una custodia con una piastra magnetica/di ferro;

O Se si utilizza una custodia con supporto esterno (pop socket);

O Se si utilizza una custodia protettiva ultra spessa (> 5 mm). Non posizionare oggetti estranei tra il dispositivo e la superficie del caricatore wireless, inclusi placchette in metallo su supporti per auto, carte di credito, chiavi, monete, metallo o carte contactless, che potrebbero causare errori di ricarica wireless o surriscaldamento. I caricabatterie wireless rendono la ricarica pi comoda rispetto a quelli cablati. Tuttavia, sulla base dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore a quella dei caricabatterie cablati. Le alte temperature ridurranno la velocit e la potenza di ricarica. Si tratta di un fenomeno comune a tutti i caricabatterie wireless. Si consiglia di caricare il dispositivo in ambienti con temperature inferiori a 25 C. Sia la custodia protettiva del telefono sia la posizione del dispositivo sul caricatore wireless influiscono sulla velocit di ricarica. Quanto pi lontani dal centro del caricatore wireless, tanto pi lenta sar la velocit di ricarica. 09 10 Informazioni importanti sulla sicurezza Non fare cadere il prodotto. Non smontare il prodotto. Non esporre il prodotto a liquidi. Per effettuare la carica in modo rapido e sicuro, utilizzare i cavi originali o certificati. Il prodotto adatto all'utilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40 C. Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzola. Specifiche Ingresso 12V 3A Uscita wireless 5W / 7.5W / 10W / 15W Uscita USB Dimensioni Peso 5V 2.4A (Max) 185 g / 6.5 oz 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in PT Indicador de LED Status Azul constante por 3 segundos, em seguida, desligado Conectado energia Azul constante Carregar o dispositivo mvel Luz azul piscando Metal ou objetos anormais detectados Luz verde piscando Proteo contra sobretenso, indicando que preciso alternar para um adaptador DC 12V 3A O dispositivo no pode ser carregado sem fio caso voc esteja usando:

T O Uma capa com placa magntica ou de ferro;

O Um Popsocket;

O Uma capa protetora muito espessa (mais de 5 mm). No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem fio, incluindo suportes veiculares em metal, cartes de crdito, chaves, moedas, metal ou cartes NFC pois isso far com que o carregamento sem fio falhe ou causar superaquecimento. Os carregadores sem fio tornam o carregamento mais conveniente do que os carregadores com fio, mas limitados pela tecnologia sem fio atual, sua velocidade de carregamento menor do que a dos carregadores com fio. Altas temperaturas reduziro a velocidade de carregamento e restringiro a potncia. Isso um fenmeno comum a todos os carregadores sem fio. recomendado carregar o dispositivo em ambientes com temperaturas abaixo de 25C . Tanto a capa protetora do telefone quanto a posio deste sobre o carregador sem fio afetaro a velocidade de carregamento. Quanto mais longe o dispositivo estiver do centro do carregador sem fio, mais lenta ser a velocidade de carregamento. 11 12 Instrues importantes de segurana Evite deixar cair. No desmonte. No exponha a lquidos. Para carregar com rapidez e segurana, use cabos originais ou certificados para uso. 40 C. Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder Fontes abertas com chama, como velas, no devem ficar prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto. Especificaes Entrada 12V 3A Sada sem fio 5W / 7.5W / 10W / 15W Sada USB Tamanho Peso 5V 2.4A (Max) 185 g / 6.5 oz 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 13 RU

( 3 ),

, 12 3 T

O / ;

O ;

O (> 5 ) .

, , , NFC-

. 25C .

, . 14 JP

. 40 C.

, . 12V 3A 5W / 7.5W / 10W / 15W USB 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz LED 3 12V 3A DC T O /

O O ( :5mm )

NFC ( IC ) ) 25 C 15 16 40 5W / 7.5W / 10W / 15W 12V 3A 5V 2.4A (Max) 185 g / 6.5 oz 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in KO LED 3

, 12V 3A DC

. T O O O

(> 5mm)

, , , NFC .

. 25 C/77

. 18 USB 17

. 40

. C LED 3 12V 3A 12V 3A 5W / 7.5W / 10W / 15W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz USB 19 O O O T

> 5 NFC 25 C / 77 20 C 40 12V 3A 5W / 7.5W / 10W / 15W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz USB 21 3 LED T 12V 3A DC O O O

pop

(> 5 mm) NFC 25 C / 77 22 AR 40 C

( ) 12V 3A 5W / 7.5W / 10W / 15W 5V 2.4A (Max) 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz USB 23 T 3A 12V

/ O pop O

.) 5 >( O NFC

. 77 / 25

. . 24 12V 3A 5W / 7.5W / 10W / 15W 5V 2.4A (Max) USB 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz HE

)LED(

, 3

3 12 )DC(

; O

; O

." 5- , O T

,NFC , , ,

. 25

. 25 26 12V 3A 5W / 7.5W / 10W / 15W 5V 2.4A (Max) USB 204.6 x 92.0 x 14.8 mm / 8.1 x 3.6 x 0.6 in 185 g / 6.5 oz Indoor use only. This product should not be disposed of with normal waste. It must be recycled. ,

. 40C

, . // .1

. .2

. , .3

. .4

. .5 27 28

@Anker

@Anker Japan

@Anker Deutschland

@AnkerOfficial

@Anker_JP

@Anker support@anker.com

(US) +1 (800) 988 7973 Mon-Fri 9:00am - 5:00pm (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

) +86 400 0550 036

) +81 03 4455 7823 9:00 - 17:00 9:00 - 17:30

Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:

JP: KO:

:AR :HE EN: 18-month limited warranty*

DE: 18 Monate beschrnkte Herstellergarantie*

ES: Garanta limitada de 18 meses*

FR: Garantie de 18 mois*

IT: Garanzia valida 18 mesi*

PT: 18 meses de garantia limitada RU: 18 JP: 18 () KO:

18 18 18 EN: Lifetime technical support DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida FR: Support technique vie IT: Assistenza post-vendita a vita PT: Suporte tcnico ao longo da vida til do produto RU:

JP:

KO:

18 :AR 18 :HE

:AR

:HE

* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspflichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono influenzati dalle garanzie concesse dalla presente Garanzia limitata. 29

2 gees 7 8 9 owerWave 10 Stand with 2 USB-A Ports Model/an#s: A2573 Input/ AFH 12V = 3A Wireless Qutput/2 17-7 L AWA: SW / 75W/IOW /15W USB Output/USBin 77: 5V = 2.4A(Max)

~ AVIN:A2573A4 | 1C: 23451-A2575A4, FCC ID: 2AQKBA2573 AN ICES-3 (B)/ NMB-3 (B) Anker Ob Limited | Made in China CEBEO

C5266091_X10_Ed.1 Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 5/8/2020 Subject: Request for Confidentiality FCC ID: 2AOKBA2573 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Long-Term Confidentiality Short-Term Confidentiality Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info No No No No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: louis Qi Date: 5/8/2020 Title: Manager 1/1

Letter of Authorization Anker Innovations Limited C5266091_X8_Ed.1 Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product Name: PowerWave 10 Stand with 2 USB-A Ports Model Number: A2573 FCC Identifier: 2AOKBA2573 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 5/8/2020 Title: Manager Signature of applicant:

1/1