Welcome Guide PowerWave 7.5 Car Mount Important Safety Instructions Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. Do not install while driving. At a Glance Wireless Charging Car Mount 1. Telescopic arms 2. Bottom foot 3. Foot knob 4. Cradle 5. Release Button 6. Three-level adjustable claw 7. Swivel knob 8. Micro USB Port 9. LED indicator Alternative three-sided handles Lever USB charging cable Status LED The LED indicator displays the status of the car mount charger. Status LED Indicator Connected to power Charging mobile device /
Fully charged Solid blue for three seconds, then off Solid blue
- Metal or other foreign objects detected
- Using an incompatible car charger or cable Flashing blue Overheating problem detected Flashing red Compatibility Before using this product, make sure your smartphone is compatible with Qi wireless charging technology. Smartphone Qi-Compatible Phones iPhone 8, iPhone 8 Plus, iPhone X, etc Samsung Galaxy S9+, S9, Note 8, S8+, S8, S7 edge, S7, etc LG G7, V35, V30, V30+, etc Car Charger
[ car charger]
Power Output
[
]
+
+
+
5V 2A 9V 12V 2A 1.5A Quick Charge 3.0 9V 12V 2A 1.5A Quick Charge 3.0
=
=
5W 7.5W
=
10W Mounting Your Smartphone 1. Loosen the foot knob on the back to adjust the height of the foot. The degree scale printed on the bottom foot helps you best fit the dimensions of your smartphone. foot knob foot Degree Scale Note8 i8+/S8+/S9+
S8/S9/S7 e IX/S7 i8 Ideal for Samsung Note 8 iPhone 8+/Samsung S8+/Samsung S9+
Samsung S8/S9/S7 edge iPhone X/Samsung S7 iPhone 8 2. Insert the three-level adjustable claw into your cars air vent. Make sure the claw is inserted securely in position.
[]
3 levels to fit more air vents
[a. b.c ]
/
Loosening the claw 3. Unscrew the swivel knob on the back, adjust the car mount to the optimal viewing angle, then tighten the swivel knob to secure. Placing the car mount horizontally or vertically car mount 4. Press the release button on the side of the cradle to extend the telescopic arms. 5. Place your smartphone in the mount and squeeze the telescopic arms until the phone is securely in position. Adjust the mount to the perfect angle.
[]
Note For optimal charging performance, align the smartphone with the Qi coil on the center of the car mount. If there is no grade scale for your smartphone or your phone has a protective cover, you can slightly adjust the bottom foot to align the smartphone with the Qi coil.
[]
To securely fasten the phone, press the rear-end position of the telescopic arms, as illustrated.
[]
Non-intensive, arc-shaped or retraction-type air vents are not supported. Do not place any foreign objects between your smartphone and the surface of the car mount, including metal objects, credit cards, door keys, coins, or NFC cards, as it may cause overheating.
[]
Using an ultra-thick protective phone case is not recommended as it may affect the wireless charging function. Using the Alternative Three-Sided Handles If the three-level adjustable claw does not fit your air vents, use the alternative three-
sided handles instead. 1. Unscrew the swivel knob on the back and remove the three-level adjustable claw.
[]
2. Firmly insert the round head of the three-sided handles into the joint of the car mount, then tighten the swivel knob to secure.
[]
3. Press and hold the lever to firmly insert the claw into your cars air vent. Make sure the claw is inserted securely in position. 4. Repeat steps 2-5 mentioned in the Mounting Your Smartphone section to mount your phone. Charging Your Smartphone Wirelessly 1. Mount your smartphone in your desired location. 2. Use the USB cable to connect the car mount to a car charger. Your phone will begin to charge wirelessly.
[ USB ]
3. After use, press the release button to remove your phone.
[ ]
Wireless charging function is sensitive to temperature. The in-car high temperature may pause charging or slow down the charging speed, so it is recommended to turn on the air conditioner in your car to avoid overheating. If the LED indicator flashes red, it indicates this product is overheated. Let it cooled down before you resume charging. For optimal wireless charging performance, use a Quick Charge car charger. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave 7.5 Car Mount Model: A2551 The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US Telephone: +1 (909) 484 1530
- English: "
This device complies with Industry Canada licence-exempt RSS standard(
s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
- French:"
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2551 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/products Specifications Input 5V=2A9V=2A12V=1.5A Size (L x W x H) 74.1 x 17.7 x 58.3 mm / 2.9 x 4.6 x 2.3 in Weight
- car mount with three-
level adjustable claw
- three-sided handles
- USB cable 134g/4.7oz 21g/0.7oz 40g/1.4oz 18g/0.6oz Product Number: A2551 The product shall not be disposed together with the normal waste. It must be recycled. EN: Customer Service IT: Servizio Clienti EN: 18-month Limited Warranty IT: Garanzia valida 18 mesi EN: Lifetime Technical Support IT: Assistenza post-vendita a vita lient iiaAR:
isii t 18 iAR:
tnt ii nt intAR:
(US) +1 (800) 988 7973 Mon-Fri 9:00am - 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)
(DE) +49 (0) 69 9579 7960 Mon-Fri 6:00 - 11:00
() +86 400 0550 036 9:00 - 17:30
() +81 03 4455 7823 - 9:00 - 17:00 For FAQs and more information, please visit https://www.anker.com/support Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong