FCC ID: 2AOKB-A2543 PowerWave Magnetic 2-in-1 Stand Lite

For FAQs and more information, please visit:

anker.com/support

@Anker Deutschland

@Anker Japan

@Anker Product Number: A2543 51005002866 V01 English Deutsch Espaol Franais Italiano Portugus P Trk 01 05 07 10 15 17 20 22 25 27 29 31 33 36 EN Flashing LED Indicator Status Solid white for 4 seconds, then turns off Connected to power Left LED indicator: Solid white Charging your phone Right LED indicator: Solid white Charging your wireless earbuds Metal objects detected Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter You cannot charge your device wirelessly when using an T ultra-thick (> 4 mm) protective phone case or a case with a pop socket. This wireless charger only supports the protective cases that match the magnetic structure of the iPhone. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 35C / 95F. 01 Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. 02 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator

& your body. Product Name: PowerWave Magnetic 2-in-1 Stand Lite Model: A2543 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This digital apparatus complies with CAN ICES-003(B)/NMB-003(B). 03 Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2543 is in compliance with Directives 2014/53/EU & 2011/65/

EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2543 is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:

https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. 04 Specifications Input Output 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W (7.5W for iPhone) Operating Temperature

-10 C - 40 C Radiated H-Field

-45.76dB A/m(@10m) TX/RX Frequency Range 110-205KHz (only for EU and UK) This product complies with the radio interference re q u i re m e n t s o f t h e E u ro p e a n Co m m u n i ty This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. DE Blinkt 05 LED-Anzeige Status Leuchtet 4 Sekunden lang wei, geht dann aus Mit der Stromversorgung verbunden Linke LED-Anzeige: Leuchtet wei Ihr Telefon wird aufgeladen Rechte LED-Anzeige: Leuchtet wei Ihre kabellosen Ohrhrer werden aufgeladen Metallobjekte erkannt Nicht kompatibler AC-Adapter angeschlossen, zeigt an, dass Sie zu einem Quick Charge 2.0/3.0-

oder Power Delivery-Netzteil wechseln mssen Sie knnen Ihr Gert nicht drahtlos aufladen, wenn Sie eine ultradicke (> 4 mm) Schutzhlle oder eine Schutzhlle mit Sockel/Griff verwenden. T Dieses kabellose Ladegert untersttzt nur die Schutzhllen, die der magnetischen Struktur des iPhone entsprechen. Schlieen Sie das kabellose Ladegert an einen Quick Charge 2.0/3.0- oder Power Delivery-Wandadapter an. Schlieen Sie das Gert nicht an ein 5 V/1 A-Wandladegert oder einen USB-Anschluss eines Computers an, da dies die Funktion zum kabellosen Aufladen beeintrchtigen kann. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des kabellosen Ladegerts, einschlielich Metallpads an einer Kfz-Halterung, Magnetkarten, Trschlssel, Mnzen, NFC-Karten oder andere Metallgegenstnde, da diese das kabellose Ladegert mglicherweise entmagnetisieren, die Ladegeschwindigkeit beeintrchtigen oder eine berhitzung verursachen knnen. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen verringern die Ladegeschwindigkeit und schrnken die Leistung ein. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 35C/95F aufladen. Wichtige Sicherheitshinweise Lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder betreiben. Nicht fallen lassen. Nicht auseinanderbauen. Keinen Flssigkeiten aussetzen. Verwenden Sie fr das sicherste und schnellste Aufladen Original- oder zertifizierte Kabel. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40C nicht bersteigen. Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. 06 Konformittserklrung Anker Innovations Limited erklrt hiermit, dass Produkttyp A2543 die Richtlinien 2014/53/EU und 2011/65/EU erfllt. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar:

https://www.anker.com/

Indicador LED izquierdo: Blanco fijo Cargando el telfono Indicador LED derecho: Blanco fijo Cargando auriculares inalmbricos Dieses Produkt erfllt die Anforderungen der Europischen Gemeinschaft an Funkstrungen. Parpadeante Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten abzugeben. T Technische Daten Leistungsaufnahme 5V 3A / 9V 2A / 12V 2A Ausgang 5W / 7,5W / 10W (7,5W fr iPhone) Betriebstemperatur

-10 C - 40 C Abgestrahltes H-Feld

-45.76dB A/m(@10m) TX-/RX-Frequenzbereich 110-205KHz (only for EU and UK) ES 07 Indicador LED Estado Blanco fijo durante 4 segundos, luego se apaga Conectado a la fuente de alimentacin Objetos metlicos detectados Adaptador de CC incompatible conectado; indica que se debe cambiar a un adaptador Quick Charge 2.0/3.0 o Power Delivery No es posible cargar el telfono de forma inalmbrica si tiene puesta una funda protectora gruesa (>4mm) o un popsocket. Este cargador inalmbrico solo es compatible con fundas protectoras cuya estructura magntica es similar a la del iPhone. Conecte el cargador inalmbrico a un adaptador de Quick Charge 2.0/3.0 o Power Delivery. No lo conecte a un cargador de pared de 5V/1A ni a un puerto USB de ordenador, ya que puede afectar a la funcin de carga inalmbrica. No coloque ningn objeto extrao entre su dispositivo y la superficie del cargador inalmbrico, incluyendo almohadillas metlicas de soportes para automvil, tarjetas magnticas, llaves de puertas, monedas, tarjetas NFC u otros objetos metlicos, ya que podran desmagnetizar el cargador inalmbrico y afectar a la carga, a la velocidad o provocar un sobrecalentamiento. Los cargadores inalmbricos proporcionan mayor comodidad que los cargadores con cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que estos. Las temperaturas elevadas reducen la velocidad de carga y limitan la potencia. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 35C. 08 Instrucciones de seguridad importantes Consulte la informacin elctrica y de seguridad en la parte inferior antes de instalar o utilizar el producto. Evite que el dispositivo sufra cadas. No desmonte el dispositivo. No exponga el dispositivo a lquidos. Para disfrutar de una experiencia de carga ms rpida y segura, utilice cables originales o certificados. Este producto solo es adecuado para climas moderados. La temperatura ambiente mxima durante el uso del producto no debe superar los 40C. No coloque fuentes de llama abierta, como velas, sobre este producto. Utilice nicamente un pao seco o un pincel para limpiar el producto. Declaracin de conformidad Por la presente, Anker Innovations Limited declara que este producto tipo A2543 cumple con las Directivas 2014/53 EU y 2011/65/EU. El texto completo de la declaracin de conformidad EU est disponible en la siguiente direccin de Internet:

https://www.anker.com/

Este producto cumple con los requisitos de radiointerferencias de la Comunidad Europea. Este smbolo indica que el producto no puede desecharse junto con los residuos domsticos. En su lugar, debe llevarse a un punto de recogida adecuado para el reciclaje de aparatos elctricos y electrnicos. Especificaciones Entrada Salida 09 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W (7,5W para iPhone)

-10 C - 40 C

-45.76dB A/m(@10m) 110-205KHz (solo para UE y Reino Unido) Temperatura de funcionamiento Campo H de radiacin Rango de frecuencias TX/RX FR Voyant LED tat Blanc fixe pendant 4secondes, puis s'teint Connect l'alimentation Voyant LED gauche : Blanc fixe Charge de votre tlphone en cours Voyant LED droit : Blanc fixe Clignotement Charge de vos couteurs sans fil en cours Objets mtalliques dtects Adaptateur secteur incompatible connect, indiquant que vous devez passer un adaptateur Quick Charge 2.0/3.0 ou Power Delivery Vous ne pouvez pas charger votre appareil sans fil lorsque T vous utilisez un tui de protection pour tlphone ultra pais (>

4mm) ou un tui avec support poigne. Ce chargeur sans fil prend uniquement en charge les tuis de protection qui correspondent la structure magntique de l'iPhone. Connectez le chargeur sans fil un adaptateur mural Quick 10 Charge 2.0/3.0 ou Power Delivery. N'effectuez pas le raccordement un chargeur mural 5V/1A ou un port USB d'un ordinateur car cela pourrait affecter la fonction de charge sans fil. Ne placez aucun objet tranger entre votre appareil et la surface du chargeur sans fil, y compris les plaques mtalliques des supports pour voiture, les cartes magntiques, les cls, les pices de monnaie, les cartes NFC ou tout autre objet mtallique, car ils pourraient potentiellement dmagntiser le chargeur sans fil, rduire la vitesse de charge ou provoquer une surchauffe. Les chargeurs sans fil facilitent le chargement compars aux versions filaires traditionnelles. Nanmoins, restreinte par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. Les tempratures leves rduiront la vitesse de chargement et limiteront la puissance. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 35C. Consignes de scurit importantes Veuillez vous rfrer aux informations lectriques et de scurit sur le dessous avant de monter ou d'utiliser le produit. Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Afin de garantir un chargement plus rapide et plus sr, utiliser les cbles dorigine ou des cbles certifis. Ce produit est adapt uniquement aux climats temprs. La temprature ambiante maximale pendant lutilisation de ce produit ne doit pas dpasser 40C. Ce produit ne doit pas tre expos des sources de flamme nue telles que les bougies. Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. Dclaration de conformit Par la prsente, Anker Innovations Limited dclare que ce produit de type A2543 est conforme aux Directives 2014/53/EU et 2011/65/EU. Le texte intgral de la dclaration de conformit pour l'UE est disponible l'adresse internet suivante:

https://www.anker.com/

Ce produit est conforme aux exigences en matire d'interfrences radio de la Communaut europenne. Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. Spcifications Entre Sortie Temprature de fonctionnement 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W (7,5W pour iPhone)

-10 C - 40 C Champ H rayonn

-45.76dB A/m(@10m) Gamme de frquence TX/RX 110 205KHz (uniquement pour l'UE et le Royaume-Uni) 11 12 Dclaration FCC Cet appareil est conforme la partie 15 du rglement de la FCC. Le fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas produire d'interfrences nuisibles, et (2) cet appareil doit accepter toutes les interfrences subies, y compris celles susceptibles d'en compromettre le fonctionnement. Aver tissement : les changements ou les modifications non expressment approuvs par la partie responsable de la conformit pourraient entraner une annulation de l'autorisation d'utilisation de l'quipement. REMARQUE : cet appareil a t test et dclar conforme aux restrictions relatives un appareil numrique de Classe B, en application de la section 15 du rglement de la FCC. Ces restrictions sont dsignes afin de fournir une protection raisonnable contre des interfrences nuisibles dans une installation rsidentielle. Cet appareil gnre, utilise et peut mettre des frquences radio qui peuvent causer des interfrences nuisibles aux radiocommunications si lappareil nest pas install et utilis conformment aux instructions. Cependant, il n'est nullement garanti que ces interfrences seproduiront dans une installation particulire.Si cet appareil provoque des interfrences nuisibles la rception de la radio ou de la tlvision, ce qui peut tre dtermin en mettant en route l'appareil et en l'arrtant, il est recommand d'essayer de corriger les interfrences en prenant l'une ou plusieurs des mesures suivantes : (1) rorienter ou dplacer l'antenne de rception , (2) loigner davantage l'appareil du rcepteur ;

(3) brancher l'appareil une prise sur un circuit diffrent de celui auquel le rcepteur est connect ; (4) consulter le revendeur ou un technicien expriment en radio/tlvision pour obtenir une assistance. Dclaration sur l'exposition aux radiations Cet quipement est conforme aux limites FCC d'exposition aux rayonnements dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Nom du produit : PowerWave Magnetic 2-in-1 Stand Lite Modle : A2543 L'importateur suivant est la partie responsable (pour les questions 13 relatives au rglement FCC uniquement). Nom de la socit : Fantasia Trading LLC Adresse : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Tlphone :

+1 800 988 7973 Dclaration d'Industrie Canada Cet appareil est conforme la orme RSS-216 d'Industrie Canada. Son utilisation est sujette auxconditions voulant que cet appareil ne cause aucune interfrence nuisible. RSS-Gen numro 5 mars 2019 Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Dclaration de conformit Par les prsentes, Anker Innovations Limited dclare que le produit de type A2543 est conforme aux directives 2014/53/UE et 2011/65/UE. Le texte complet de la dclaration de conformit la rglementation europenne est disponible ladresse Internet suivante :

https://www.anker.com/

14 IT Istruzioni importanti sulla sicurezza Indicatore LED Stato Bianco fisso per 4 secondi, poi si spegne Collegato all'alimentazione Indicatore LED sinistro: bianco fisso Ricarica del telefono Indicatore LED destro: bianco fisso Ricarica degli auricolari wireless Lampeggiante Oggetti metallici rilevati stato collegato un adattatore CA incompatibile, a indicare che necessario passare a un adattatore Quick Charge 2.0/3.0 o Power Delivery Non possibile ricaricare il dispositivo in modalit wireless quando si utilizza una custodia protettiva ultra spessa (pi di 4 mm) o una custodia con una presa esterna. T Questo caricabatterie wireless supporta solo le custodie protettive che corrispondono alla struttura magnetica delliPhone. Collegare il caricabatterie wireless a un adattatore a muro Quick Charge 2.0/3.0 o Power Delivery. Non collegare a un caricatore a muro 5V/1A o a una porta USB su un computer in quanto potrebbe influire sulla funzione di ricarica wireless. Non posizionare oggetti estranei tra il dispositivo e la superficie del caricabatterie wireless, inclusi cuscinetti metallici su un supporto per auto, schede magnetiche, chiavi di porte, monete, schede NFC o altri oggetti metallici, poich potrebbero potenzialmente smagnetizzare il caricabatterie wireless, influenzare la velocit della ricarica o causare surriscaldamento. I caricabatterie wireless rendono la ricarica pi pratica rispetto a quelli cablati. Tuttavia, a causa dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore. Le alte temperature ridurranno la velocit di ricarica e la potenza. Si consiglia di ricaricare il dispositivo in ambienti con temperature inferiori a 35C. 15 Fare riferimento alle informazioni elettriche e di sicurezza sul fondo prima di installare o utilizzare il prodotto. Non lasciar cadere il prodotto. Non smontarlo. Non esporlo a liquidi. Per effettuare la ricarica in modo rapido e sicuro, utilizzare cavi originali o certificati. Il prodotto adatto allutilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40C. Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o una spazzolina. Dichiarazione di conformit Con la presente, Anker Innovations Limited dichiara che il tipo di prodotto A2543 conforme alle Direttive 2014/53/EU e 2011/65/EU. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

https://www.anker.com/

Questo prodotto conforme ai requisiti della Comunit europea relativi alle interferenze radio. Questo simbolo indica che il presente prodotto non deve essere rattato come rifiuto domestico. Deve invece essere consegnato al punto di raccolta applicabile per il riciclaggio di apparecchiature elettriche ed elettroniche. 16 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W (7,5W per iPhone) Temperatura di esercizio

-10 C - 40 C Campo magnetico radiato

-45.76dB A/m(@10m) Gamma di frequenza TX/RX 110-205 KHz (solo per UE e Regno Unito) Specifiche Ingresso Uscita PT-BR Indicador LED Estado Branco slido durante 4 segundos, depois desliga-se Ligado corrente eltrica Indicador LED esquerdo: branco slido A carregar o telemvel Indicador LED direito: branco slido A carregar os auscultadores sem fios Objetos metlicos detetados Adaptador CA incompatvel ligado, indica que necessita de mudar para um adaptador Quick Charge 2.0/3.0 ou Power Delivery o pode efetuar o carregamento sem fios do dispositivo quando T utiliza uma capa de proteo ultragrossa (> 4 mm) ou uma capa com um suporte PopSocket. Este carregador sem fios s compatvel com capas de proteo que correspondam estrutura magntica do iPhone. A piscar 17 Ligar o carregador sem fios a um adaptador de parede Quick Charge 2.0/3.0 ou Power Delivery. No ligue a um carregador de parede de 5 V/1 A ou a uma porta USB num computador porque pode afetar a funo de carregamento sem fios. No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem fios, incluindo manes para instalao no carro, cartes magnticos, chaves de porta, moedas, cartes NFC ou outros objetos metlicos, dado que podem desmagnetizar o carregador sem fios, afetar a velocidade de carregamento ou causar sobreaquecimento. Os carregadores sem fios tornam o carregamento mais conveniente do que os carregadores com fios, mas, devido s restries tecnolgicas, a respetiva velocidade de carregamento inferior proporcionada pelos carregadores com fios. As altas temperaturas reduzem a velocidade de carregamento e restringem a potncia. Recomenda-se que carregue o dispositivo em ambientes com temperaturas inferiores a 35 C. Instrues de segurana importantes Consulte as informaes eltricas e de segurana abaixo antes de instalar ou utilizar o produto. Evite deixar cair. No desmonte. No exponha ao contacto com lquidos. Para beneficiar de um carregamento mais seguro e rpido, utilize cabos originais ou certificados. Este produto adequado apenas para climas moderados. A temperatura ambiente mxima durante a utilizao deste produto no deve exceder os 40 C. As fontes de chama abertas, tais como velas, no devem ser colocadas sobre este produto. Utilize apenas um pano seco ou uma escova para limpar este produto. 18 Declarao de Conformidade Por este meio, a Anker Innovations Limited declara que o tipo de produto A2543 est em conformidade com as Diretivas 2014/53/UE e 2011/65/UE. O texto completo da declarao de conformidade da UE est disponvel no seguinte endereo de Internet:

https://www.anker.com/

Este produto cumpre as normas de interferncias de rdio da Comunidade Europeia. Este smbolo indica que este produto no deve ser tratado como lixo domstico. Em vez disso, deve ser entregue no ponto de recolha aplicvel para reciclagem de equipamento eltrico e eletrnico. Especificaes Entrada Sada 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W (7,5W para iPhone) Temperatura de funcionamento

-10 C - 40 C Campo H irradiado

-45.76dB A/m(@10m) Gama de frequncias de TX/RX 110-205 KHz (apenas para a UE e o Reino Unido) 19 4 ,

RU T

, Quick Charge 2.0/3.0 Power Delivery.

(> 4 )

, iPhone. Quick Charge 2.0/3.0 Power Delivery.

, 5 1 USB- ,

, , , NFC 20

. 35 C. 40 C.

, . Anker Innovations Limited , A2543 2014/53/EU 2011/65/EU.

https://www.anker.com/

21

. 5V 3A / 9V 2A / 12V 2A 5 ; 7,5 ; 10 (7,5 iPhone)

-10 C - 40 C

-45,76 / ( 10 ) 110205 (

) TR LED Gstergesi 4 saniye boyunca sabit beyaz, sonra kapanyor Durum Gce bal Sol LED gstergesi: Sabit beyaz Telefonunuz arj ediliyor Sa LED gstergesi: Sabit beyaz Kablosuz kulaklklarnz arj ediliyor Yanp snyor Metal nesneler tespit edildi Uyumsuz AC adaptr bal, bir Quick Charge 2.0/3.0 veya Power Delivery adaptre gemeniz gerektiini gsterir 22 Ultra kaln (>4 mm) koruyucu telefon klf veya tutuculu klf kullanrken cihaznz kablosuz olarak arj edemezsiniz. Bu kablosuz arj cihaz yalnzca iPhone'un manyetik yapsna T uygun koruyucu klflar destekler. Kablosuz arj cihazn bir Quick Charge 2.0/3.0 veya Power Delivery duvar adaptre balayn. Kablosuz arj ilevini etkileyebileceinden, 5 V/1 A duvar arj cihazna veya bilgisayardaki bir USB balant noktasna balamayn. Cihaznz ile kablosuz arj cihaznn yzeyi arasna, araba tutucusu zerindeki metal pedler, manyetik kartlar, kap anahtarlar, bozuk paralar, NFC kartlar veya dier metal nesneler dahil herhangi bir yabanc cisim koymayn; bunlar kablosuz arj cihaznn manyetikliini bozabilir, arj hzn etkileyebilir veya ar snmaya neden olabilir. Kablosuz arj cihazlar, arj ilemini kablolu arj cihazlarndan daha kolay hale getirir, ancak mevcut kablosuz teknolojiyle snrlandrldnda, arj hzlar kablolu arj cihazlarndan daha yavatr. Yksek scaklklar arj hzn drecek ve gc kstlayacaktr. Cihaznz 35 C/95 F'nin altndaki ortamlarda arj etmeniz nerilir. nemli Gvenlik Talimatlar rn kurmadan veya altrmadan nce ltfen aadaki elektrik ve gvenlik bilgilerine bakn. Drmekten kann. Paralara ayrmayn. Svlara maruz brakmayn. En gvenli ve en hzl ekilde arj edebilmek iin orijinal veya onayl kablolar kullann. Bu rn yalnzca lman iklimler iin uygundur. Bu rnn kullanm srasnda maksimum ortam scakl 40 C'yi gememelidir. Mum gibi ak alev kaynaklar bu rnn zerine yerletirilmemelidir. Bu rn temizlemek iin yalnzca kuru bir bez veya fra kullann. Uygunluk Beyan Anker Innovations Limited, ibu belge ile A2543 rn tipinin 2014/53/

EU ve 2011/65/EU Ynergelerine uygun olduunu beyan eder. AB uygunluk beyannn tam metni aadaki internet adresinde mevcuttur:

https://www.anker.com/

Bu rn, Avrupa Topluluu'nun radyo paraziti gerekliliklerine uygundur. Bu sembol, bu rnn evsel atk olarak ilem grmemesi gerektiini belirtir. Bunun yerine, elektrikli ve elektronik ekipmanlarn eri dnm iin geerli toplama noktasna teslim edilmelidir. Teknik zellikler 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W (iPhone iin 7,5W) alma Scakl

-10 C - 40 C Yaylan Manyetik Alan

-45,76 dB A/m (10 m'de) TX/RX frekans aral 110-205 KHz (yalnzca AB ve BK iin) Giri k 23 24 JP T LED 4 LED LED Qualcomm Quick Charge 2.0 3.0 USB Power Delivery

( 4mm ) MagSafe iPhone Qualcomm Quick Charge 2.03.0 USB Power Delivery 5W PC USB

NFC ( IC )

) 25 35 C 40

( ) 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10WiPhone 7.5W

-10 C - 40 C 26 KO LED 4 LED :

LED :

AC

, Quick Charge 2.0/3.0 Power Delivery 4mm

. iPhone

. Quick Charge 2.0/3.0 Power Delivery

. 5V/1A USB .

, , , , NFC

. 35 C/95 F

. T 27

. 40 C

. Anker Innovations Limited A2543 2014/53/EU 2011/65/EU . EU

. https://www.anker.com/

. 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W (iPhone 7.5W)

-10 C - 40 C 28 LED 4 LED LED Quick Charge 2.0/3.0 Power Delivery

> 4 iPhone Quick Charge 2.0/3.0 Power Delivery 5V/1A USB NFC 35 C /

95 F T 29 40 C Anker Innovations Limited A2543 2014/53/EU 2011/65/EU https://www.anker.com/

5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W iPhone 7.5W

-10 C - 40 C

-45.76dBA/m(@10m)

/ 110-205KHz 30 LED 4 LED LED AC Quick Charge 2.0/3.0 Power Delivery

(> 4 mm) (Pop Socket) iPhone Quick Charge 2.0/3.0 Power Delivery 5V/1A USB

NFC

) 35 C/95 F T 31 40 C Anker Innovations Limited A2543 2014/53/EU 2011/65/EU https://www.anker.com/

5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W (iPhone 7.5W)

-10 C - 40 C

-45.76dBA/m(@10m) TX/RX 110-205KHz ( ) 32

. 95 / 35

. 40

. LED 4 Quick Charge Power Delivery 2.0/3.0

: LED

: LED 4 >(

) T

. iPhone Quick Charge 2.0/3.0

.Power Delivery USB 1/ 5

. NFC 33 34 A2543 Anker Innovations Limited

.EU & 2011/65/EU/2014/53

https://www.anker.com

. 12 / 2 == 9 / 3 == 5 2 ==

)iPhone 7.5( 10 / 7.5 / 5 C - 40 C 10

) 10 ( dBA/m -45.76

( 205 - 110

) 35

, 4

, Quick Charge 2.0/3.0 Power Delivery T

> 4(

Quick Charge

. Power Delivery 2.0/3.0 5V/1A

, USB

.iPhone-

, NFC

. , 36

. 35C-

5V 3A / 9V 2A / 12V 2A

)iPhone- 7.5W(

5W / 7.5W / 10W 10 C - 40 C

-45.76dBA/m)@10m(

TX/RX

( 110-205KHz

) A2543 Anker Innovations Limited

. 2014/53/EU & 2011/65/EU

https://www.anker.com/

. 40C-

. , 37 38 Customer Service DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:

TR: Mteri Hizmetleri JP: KO:

:AR :HE EN: 18-month limited warranty* | DE: 18 Monate beschrnkte Herstellergarantie*

ES: Garanta limitada de 18 meses* | FR: Garantie de 18 mois*

IT: Garanzia valida 18 mesi* | PT: 18 meses de garantia limitada RU: 18 | TR: 18 aylk snrl garanti JP: 18 () | KO:

: 18

: 18

18 18 :AR 18 :HE

* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspflichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono influenzati dalle garanzie concesse dalla presente Garanzia limitata. EN: Lifetime technical support | DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida | FR: Support technique vie IT: Assistenza post-vendita a vita | PT: Suporte tcnico ao longo da vida til do produto RU:

TR: mr boyu teknik destek JP: | KO:

:AR | :HE support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US) +1 (800)988 7973 Mon-Fri 6:15 - 17:00 (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30

(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30

(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30

(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30

(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30

(AU) +61 3 8331 4800 Mon-Fri 8:30 - 17:00 (AEST)

(TR) +90 0850 460 14 14 Mon-Fri 9:00 - 18:00

(RU) +8 (800) 511-86-23 Mon-Fri 9:00 - 18:00 (MSK)

+86 400 0550 036 9:00 - 17:30 03 4455 7823 - 9:00 - 17:00

+82 02-1670-7098 - 10:00 - 17: 00 39 40

A2543

镭雕

丝印 PT 877C

丝印 PT 5C

设计：hongbin

日期：20210508

居中对齐

m

m

5

.

9

4

1

m

m

0

.

1

6

55mm

10.3 mm

居中对齐

16mm

20mm

61.0 mm

居中对齐

100.0 mm

出线方向

5.5mm

m

m

2

.

1

1

m

m

0

.

0

0

1

Anker Innovations Limited Declaration concerning Antenna Specification It is hereby declared that the product Model No.: A2543 FCC ID : 2AOKB-A2543 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

ANT1 Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Inductive loop coil Antenna 0 dBi 111.1-205KHz ANT2 Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Inductive loop coil Antenna 0 dBi 111.1-205KHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Kowloon City:

ZIP / Postal code: N/A Country:

Place:

Hong Kong Kowloon Signature:

Date: 7/26/2021 version01