FCC ID: 2AOKB-A2567A PowerWave Magnetic Pad Lite

For FAQs and more information, please visit:

anker.com/support

@anker_official

@anker_jp

@Anker Deutschland

@Anker Japan

@Anker

@AnkerOfficial

@Anker_JP Product Number: A2567 51005002677 V01 English Deutsch Espaol Franais Italiano Portugus P Trk 01 05 06 08 11 13 15 17 18 20 21 23 24 27 EN T You cannot charge your device wirelessly when using an ultra-thick (>

4 mm) protective phone case or a case with a pop socket. This wireless charger only supports the protective cases that match the magnetic structure of the iPhone. Do not place any foreign objects between your device and the wireless chargers surface, including metal pads on a car mount, magnetic cards, door keys, coins, metal objects, or NFC cards, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40C / 104F. Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. Avoid dropping. Do not disassemble. Do not expose to liquids. For the safest and fastest charge, use original or certified cables. This product is suitable for moderate climates only. The maximum ambient temperature during use of this product must not exceed 40C. Open flame sources, such as candles, must not be placed on this product. Only use a dry cloth or brush to clean this product. The socket-outlet shall be installed near the product and shall be easily accessible. Disconnection from line voltage should be made via the AC plug. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio

/ TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. Product Name: PowerWave Magnetic Pad Lite Model: A2567 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 01 02 Specifications Input Output 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W Operating Temperature

-10 C to 40 C Radiated H-Field TX/RX Frequency Range 110-205kHz (Only for EU and UK)

-8.35dBuA/m (@10m) Indoor use only. This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. RF exposure statement:

The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2567 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:

https://www.anker.com/

UK Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2567 is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address:

https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. 03 04 DE Sie knnen Ihr Gert nicht drahtlos aufladen, wenn Sie eine ultradicke

(> 4 mm) Schutzhlle oder eine Schutzhlle mit Sockel/Griff verwenden. T Dieses drahtlose Ladegert untersttzt nur die Schutzhllen, die der magnetischen Struktur des iPhone entsprechen. Legen Sie keine Fremdkrper zwischen Ihr Gert und die Oberflche des drahtlosen Ladegerts, einschlielich Metallpads einer Kfz-

Halterung, Magnetkarten, Trschlssel, Mnzen, Metallobjekte oder NFC-Karten, da diese mglicherweise das Aufladen des drahtlosen Gerts verhindern oder eine berhitzung verursachen knnten. Kabellose Ladegerte machen das Aufladen praktischer als Ladegerte mit Kabel, haben aber eine langsamere Ladegeschwindigkeit als Ladegerte mit Kabel, da sie durch die aktuelle kabellose Technologie eingeschrnkt sind. Hohe Temperaturen verringern die Ladegeschwindigkeit und schrnken die Leistung ein. Es wird empfohlen, dass Sie Ihr Gert in Umgebungen mit Temperaturen unter 40C/104F aufladen. Wichtige Sicherheitsinformationen Bitte lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder betreiben. Nicht fallen lassen. Nicht zerlegen. Keinen Flssigkeiten aussetzen. Fr das sichere und schnellste Aufladen verwenden Sie Originalkabel oder zertifizierte Kabel. Das Produkt ist nur zur Verwendung in gemigten Klimazonen konzipiert. Die maximale Umgebungstemperatur whrend der Verwendung des Produkts darf 40 C nicht bersteigen. Offene Flammen wie z.B. Kerzen drfen nicht auf das Produkt gestellt werden. Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel. Die Steckdose muss in der Nhe des Produkt installiert werden und leicht zugnglich sein. Die Trennung von der Netzspannung sollte ber den AC-Stecker erfolgen. Dieses Produkt entspricht den EU-Bestimmungen zur Strfestigkeit. 05 Konformittserklrung Anker Innovations Limited erklrt hiermit, dass das Produkt des Typs A2567 den Richtlinien 2014/53/EU & 2011/65/EU entspricht. Der vollstndige Text der EU-

Konformittserklrung ist online unter der folgenden Adresse verfgbar:

https://www.anker.com/

Technische Daten Leistungsaufnahme 5V 3A / 9V 2A / 12V 2A Ausgang 5W / 7,5W / 10W Betriebstemperatur

-10 C bis 40 C Abgestrahltes H-Feld 8.35dBuA/m (@10m)

TX/RX-Frequenzbereich 110-205kHz (nur fr EU und GB) Verwendung nur in Innenbereichen. Dieses Symbol bedeutet, dass das Produkt nicht als Hausmll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle fr das Recycling von Elektro- und Elektronikgerten abzugeben. ES T No es posible cargar el telfono de forma inalmbrica si tiene puesta una funda protectora gruesa (>4mm) o un popsocket. Este cargador inalmbrico solo es compatible con fundas protectoras cuya estructura magntica es similar a la del iPhone. No coloque objetos extraos entre el dispositivo y la superficie del cargador inalmbrico, incluyendo placas metlicas de soportes para coche, tarjetas magnticas, llaves, monedas, objetos metlicos y tarjetas NFC, ya que esto podra hacer que el cargador inalmbrico se desimante, afectar a la velocidad de carga o provocar un sobrecalentamiento. Los cargadores inalmbricos proporcionan una mayor comodidad que los cargadores por cable, pero, al estar limitados por la tecnologa inalmbrica actual, ofrecen una velocidad de carga ms lenta que estos. Las temperaturas elevadas reducen la velocidad de carga y limitan la potencia. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 40C. 06 Instrucciones de seguridad importantes Consulte la informacin elctrica y de seguridad en la parte inferior antes de instalar o utilizar el producto. Evite que el dispositivo sufra cadas. No desmonte el dispositivo. No exponga el dispositivo a lquidos. Para disfrutar de una experiencia de carga ms rpida y segura, utilice cables originales o certificados. Este producto solo es adecuado para climas moderados. La temperatura ambiente mxima durante el uso del producto no debe superar los 40C. No coloque fuentes de llama abierta, como velas, sobre este producto. Utilice nicamente un pao seco o un pincel para limpiar el producto. La toma de corriente se debe instalar cerca del producto y ser fcilmente accesible. La desconexin de la tensin de lnea se debe realizar mediante el enchufe de CA. Este producto cumple con los requisitos de interferencias radioelctricas de la Comunidad Europea. Declaracin de conformidad Por la presente, Anker Innovations Limited declara que el producto tipo A2567 cumple con las Directivas 2014/53/UE y 2011/65/UE. El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin de Internet:

https://www.anker.com/

Especificaciones Entrada Salida 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W Solo para su uso en interiores. Este smbolo indica que el producto no puede desecharse junto con la basura domstica. En lugar de eso, debe llevarse a un punto de recogida adecuado para el reciclaje de aparatos elctricos y electrnicos. FR Vous ne pouvez pas charger votre appareil sans fil lorsque vous utilisez un tui de protection pour tlphone ultra pais (> 4mm) ou un tui avec support poigne. T Ce chargeur sans fil prend uniquement en charge les tuis de protection qui correspondent la structure magntique de l'iPhone. Afin dviter toute surchauffe ou dfaillance de chargement, ne placez pas de corps trangers entre votre appareil et la surface du chargeur sans fil, notamment, des plaquettes mtalliques sur un support de voiture, des cartes mtalliques, des cls, des pices de monnaie, des objets mtalliques et des cartes NFC, car ces objets pourraient potentiellement dmagntiser le chargeur sans fil, influer sur la vitesse de chargement ou provoquer une surchauffe. Les chargeurs sans fil facilitent le chargement compars aux versions filaires traditionnelles. Nanmoins, restreinte par la technologie sans fil actuelle, la vitesse de chargement est plus lente que celle des chargeurs filaires. Les tempratures leves rduiront la vitesse de chargement et limiteront la puissance. Il est recommand de charger votre appareil dans un environnement une temprature infrieure 40C. Temperatura de funcionamiento De -10 C a 40 C Consignes de scurit importantes Campo H radiado Rango de frecuencia TX/RX 8.35dBuA/m (@10m)

110-205kHz (solo para la U.E. y el R.U.) 07 Veuillez vous rfrer aux informations lectriques et de scurit sur le dessous avant de monter ou d'utiliser le produit. Ne pas faire tomber. Ne pas dmonter. Ne pas exposer des liquides. Afin de garantir un chargement plus rapide et plus sr, utiliser les cbles dorigine ou des cbles certifis. 08 Ce produit est adapt uniquement aux climats temprs. La temprature ambiante maximale pendant lutilisation de ce produit ne doit pas dpasser 40C. Ce produit ne doit pas tre expos des sources de flamme nue telles que les bougies. Nettoyez ce produit uniquement avec un chiffon sec ou une brosse. La prise de courant doit se situer proximit du produit et tre facilement accessible. Le dbranchement du courant se fait au niveau de la prise secteur. Dclaration FCC Cet appareil est conforme la partie15 du rglement de la FCC. Le fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas produire d'interfrences nuisibles, et (2) cet appareil doit accepter toutes les interfrences subies, y compris celles susceptibles d'en compromettre le fonctionnement. Avertissement: les changements ou les modifications non expressment approuvs par la partie responsable de la conformit pourraient entraner une annulation de l'autorisation d'utilisation de l'quipement. REMARQUE: cet appareil a t test et dclar conforme aux restrictions relatives un appareil numrique de ClasseB, en application de la section15 du rglement de la FCC. Ces restrictions sont dsignes afin de fournir une protection raisonnable contre des interfrences nuisibles dans une installation rsidentielle. Cet appareil gnre, utilise et peut mettre des frquences radio qui peuvent causer des interfrences nuisibles aux radiocommunications si lappareil nest pas install et utilis conformment aux instructions. Cependant, il n'est nullement garanti que ces interfrences se produiront dans une installation particulire. Si cet appareil provoque des interfrences nuisibles la rception de la radio ou de la tlvision, ce qui peut tre dtermin en mettant en route l'appareil et en l'arrtant, il est recommand d'essayer de corriger les interfrences en prenant l'une ou plusieurs des mesures suivantes: (1) rorienter ou dplacer l'antenne de rception, (2) loigner davantage l'appareil du rcepteur; (3) brancher l'appareil une prise sur un circuit diffrent de celui auquel le rcepteur est connect; (4) consulter le revendeur ou un technicien expriment en radio/tlvision pour obtenir une assistance. Dclaration sur l'exposition aux radiations Cet quipement est conforme aux limites FCC d'exposition aux rayonnements dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. Nom du produit: PowerWave Magnetic Pad Lite Modle: A2567 L'importateur suivant est la partie responsable (pour les questions relatives au rglement FCC uniquement). 09 Nom de la socit: Fantasia TradingLLC Adresse: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Tlphone: +1 800 988 7973 Dclaration d'Industrie Canada Cet appareil est conforme la orme RSS-216 d'Industrie Canada. Son utilisation est sujette auxconditions voulant que cet appareil ne cause aucune interfrence nuisible. RSS-Gen numro 5 mars 2019 Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Tout changement ou modification non expressment approuv par la partie responsable de la conformit pourrait annuler l'autorit de l'utilisateur utiliser l'quipement. Dclaration d'exposition RF:

L'quipement est conforme la limite d'exposition aux radiations de la IC tablie pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Ce produit est conforme aux exigences en matire d'interfrences radio de la Communaut europenne. Dclaration de conformit Par les prsentes, Anker Innovations Limited dclare que le produit de typeA2567 est conforme aux directives2014/53/UE et 2011/65/UE. Le texte complet de la dclaration de conformit la rglementation europenne est disponible ladresse Internet suivante:

https://www.anker.com/

Spcifications ENTRE Sortie 5V 3A / 9V 2A / 12V 2A 5W / 7,5W / 10W Tempratures de fonctionnement

-10C 40C Champ H rayonn Plage de frquences TX/RX 8.35dBuA/m (@10m)

110-205kHz (seulement pour l'UE et le RU) 10 Utilisation en intrieur uniquement. Ce symbole indique que ce produit ne doit pas tre trait comme un dchet mnager. Il doit plutt tre remis au point de collecte appropri pour le recyclage des quipements lectriques et lectroniques. IT Non possibile ricaricare il dispositivo in modalit wireless quando si utilizza una custodia protettiva ultra spessa (> 4mm) o una custodia con un supporto esterno (pop socket). T Questo caricabatterie wireless supporta solo le custodie protettive che corrispondono alla struttura magnetica delliPhone. Non posizionare oggetti estranei tra il dispositivo e la superficie del caricabatterie wireless, tra cui placchette in metallo su supporti per auto, schede magnetiche, chiavi, monete, oggetti metallici o schede NFC, dato che potrebbero potenzialmente smagnetizzare il caricabatterie wireless, influenzare la velocit di ricarica o causare surriscaldamento. I caricabatterie wireless rendono la ricarica pi pratica rispetto quelli cablati. Tuttavia, a causa dei limiti della tecnologia wireless corrente, la loro velocit di ricarica inferiore a quella dei caricabatterie cablati. Le alte temperature ridurranno la velocit di ricarica e la potenza. Si consiglia di ricaricare il dispositivo in ambienti con temperature inferiori a 40C. Istruzioni importanti sulla sicurezza Fare riferimento alle informazioni elettriche e di sicurezza sul fondo prima di installare o utilizzare il prodotto. Non lasciar cadere il prodotto. Non smontarlo. Non esporlo a liquidi. Per effettuare la ricarica in modo rapido e sicuro, utilizzare cavi originali o certificati. Il prodotto adatto allutilizzo in climi moderati. Il prodotto deve essere utilizzato in ambienti a temperatura non superiore ai 40C. 11 Non collocare sorgenti di fiamme libere, ad esempio candele accese, sul prodotto. Per pulire il prodotto, utilizzare esclusivamente un panno asciutto o un pennello. La presa deve essere installata vicino al prodotto e facilmente accessibile. La disconnessione della tensione di rete deve essere seguita tramite la presa di corrente CA. Questo prodotto conforme ai requisiti della Comunit europea relativi alle interferenze radio. Dichiarazione di conformit Con la presente, Anker Innovations Limited dichiara che il prodotto di tipo A2567 conforme alle Direttive 2014/53/UE e 2011/65/UE. Il testo integrale della Dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

https://www.anker.com/

Specifiche Ingresso Uscita 5V 3A/9V 2A/12V 2A 5W/7,5W/10W Temperatura di esercizio Da -10 C a 40 C Alto campo (elettrico) irradiato Gamma di frequenza TX/RX 8.35dBuA/m (@10m)

110-205kHz (solo per UE e Regno Unito) Solo per uso in ambienti interni. Questo simbolo indica che il presente prodotto non deve essere trattato come rifiuto domestico. Deve invece essere consegnato al punto di raccolta applicabile per il riciclaggio di apparecchiature elettriche ed elettroniche. 12 Declarao de conformidade A Anker Innovations Limited declara, por meio deste documento, que o produto tipo A2567 est em conformidade com as Diretivas 2014/53/UE e 2011/65/UE. O texto completo da declarao de conformidade em relao Unio Europeia est disponvel no seguinte endereo na Internet:

https://www.anker.com/

Especificaes Entrada Sada 5V 3A / 9V 2A / 12V 2A 5 W / 7,5 W / 10 W Temperatura operacional

-10 C a 40 C Campo H radiado Faixa de frequncia de transmisso/recepo 8.35dBuA/m (@10m)

110-205kHz (apenas para UE e Reino Unido) Apenas para uso interno. Este smbolo indica que o produto no deve ser tratado como lixo domstico. Em vez disso, ele deve ser entregue a um ponto de coleta devido para reciclagem do equipamento eletrnico e eltrico. PT-BR T Voc no pode carregar seu dispositivo sem uso de fios quando estiver usando uma capa de telefone protetora muito grossa (mais de 4 mm) ou uma capa com um pop-socket. Este carregador sem fio s oferece suporte para capas protetoras com a mesma estrutura magntica do iPhone. No coloque objetos estranhos entre o dispositivo e a superfcie do carregador sem fio, incluindo suportes veiculares em metal, cartes magnticos, chaves, moedas, objetos metlicos ou cartes NFC, pois isso pode desmagnetizar o carregador sem fio, afetar a velocidade de carregamento ou causar superaquecimento. Os carregadores sem fio tornam o carregamento mais conveniente do que os carregadores com fio, mas limitados pela tecnologia sem fio atual, sua velocidade de carregamento menor do que a dos carregadores com fio. Altas temperaturas reduziro a velocidade de carga e restringiro a potncia. recomendado carregar o dispositivo em ambientes com temperaturas abaixo de 40 C. Instrues importantes de segurana Consulte as informaes eltricas e de segurana no final antes de instalar ou operar o produto. Evite deixar cair. No desmonte. No exponha o produto a lquidos. Para carregar com rapidez e segurana, use cabos originais ou certificados para uso. Este produto adequado somente para climas moderados. A temperatura ambiente mxima durante o uso deste produto no deve exceder 40 C. Fontes de chama aberta, como velas, no devem ficar prximas a este produto. Use somente um pano seco ou um pincel para limpar o produto. O plugue-tomada deve estar instalado prximo ao produto e estar facilmente acessvel. A desconexo da tenso de linha deve ser feita pelo plugue CA. Este produto est em conformidade com os requisitos de interferncia de rdio da Comunidade Europeia. 13 14 RU T

(> 4 )

, iPhone.

, , , , NFC-,

, . 40 C. 40 C.

, . 15

. Anker Innovations Limited , A2567 2014/53/EU 2011/65/EU.

https://www.anker.com/

5 3 / 9 2 / 12 2 5 / 7,5 / 10

-10 40 C 8.35dBuA/m (@10m)

110-205 (

. 16 TR T Ultra kaln (4 mm'den byk) koruyucu telefon klf veya ayaklkl bir klf kullanrken cihaznz kablosuz olarak arj edemezsiniz. Bu kablosuz arj cihaz yalnzca iPhone telefonlarn manyetik yapsna uygun koruyucu klflar destekler. Cihaznz ile kablosuz arj cihaznn yzeyi arasna mknatsl telefon tutucularn metal plakalar, manyetik kartlar, kap anahtarlar, madeni paralar, metal nesneler veya NFC kartlar gibi yabanc cisimler yerletirmeyin. Bu yabanc cisimler kablosuz arj cihaznn manyetik ilevselliini bozabilir, arj hzn etkileyebilir ya da ar snmaya neden olabilir. Kablosuz arj cihazlar arj ilemini kablolu arj cihazlarna gre daha kolaylatrr fakat mevcut kablosuz teknolojisiyle snrl olduundan arj hz kablolu arj cihazlarna gre daha dktr. Yksek scaklk arj hzn drr ve gc snrlar. Cihaznz, scakln 40C/104F altnda olduu ortamlarda arj etmeniz nerilir. nemli Gvenlik Talimatlar rn kurmadan veya kullanmadan nce alttaki elektrik ve gvenlik bilgilerine bakn. Drmekten kann. Paralarna ayrmayn. Sv temasndan kann. En gvenli ve hzl arj iin orijinal ve sertifikal kablolar kullann. Bu rn yalnzca lman iklimlerde kullanma uygundur. Bu rnn kullanm srasnda maksimum ortam scakl 40C' gememelidir. Bu rnn zerine mum gibi ak ate kaynaklar yerletirilmemelidir. Bu rn temizlemek iin yalnzca kuru bir bez veya fra kullann. Gerektiinde kolayca eriilebilmesi iin rnn yaknnda duvar prizi bulunmaldr. Hat gerilimiyle balants AC fi zerinden kesilmelidir. Bu rn, Avrupa Topluluunun radyo giriimi gerekliliklerine uygundur. Uygunluk Beyan Bu belge ile Anker Innovations Limited irketi A2567 rn trnn 2014/53/EU ve 2011/65/EU Direktiflerine uygun olduunu beyan etmektedir. AB Uygunluk beyannn tam metni aadaki internet adresinde mevcuttur:

https://www.anker.com/

17 Teknik zellikler GR k 5 V 3 A / 9 V 2 A / 12 V 2 A 5 W / 7,5 W / 10 W alma Scakl

-10-40 C Iyan Manyetik Alan TX/RX Frekans Aral 8.35dBuA/m (@10m)

110-205 kHz (Yalnzca AB ve BK iin) Yalnzca kapal mekanda kullanlabilir Bu sembol rnn evsel atk olarak deerlendirilmemesi gerektiini gsterir. Elektrikli ve elektronik ekipmann geri dntrlmesi iin uygun toplama noktalarna braklmaldr. JP T

( : 4mm ) iPhone 12 iPhone 12 Pro

NFC ( IC ) ) 40 C 18 40

( ) AC KO T 4 mm

. iPhone

, , , , NFC

. 40 C/104 F

. 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W

-10 C 40 C

. 40 C . Anker Innovations Limited A2567 2014/53/EU 2011/65/EU . EU

. https://www.anker.com/

5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W 19 20

-10 C ~ 40 C H

-8.35dBuA/m (@10m) TX/RX 110-205kHz (EU UK )

. T

> 4 iPhone NFC 40 C/104 F 40 C 21 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W

-10 C 40 C

-8.35dBuA/m (@10m)

/ 110-205 kHz T

(> 4 mm) pop iPhone NFC 40C/104F 22 40 C

( ) AC T

) 4 >(

. iPhone NFC

. 104 / 40 5V 3A / 9V 2A / 12V 2A 5W / 7.5W / 10W

-10 C 40 C

-8.35dBuA/m (@10m) TX/RX 110-205kHz ( )

. 40

. )AC(

.)FCC( 15

)2( )1( :

23 24

.)FCC( 15

)1( :

)3( . )2( .

)4( . /

20 . PowerWave Magnetic Pad Lite :

A2567 :

Fantasia Trading LLC :

Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 5350 :

. )IC(

. 20

. A2567 Anker Innovations Limited

. 2011/65 /EU 2014/53/EU

/https://www.anker.com H 2 12/ 2 5 9/ 3 10/ 7,5/ 5 40 -10

-8.35dBuA/m )@10m(

+1 )800( 988 7973 :

TX/RX

) ( 110-205

. RSS-216

. 2019 5 RSS-Gen

. )1(

)2(

:)RF(

. 25 26 T

. )" 4 >(

.iPhone

,NFC

. 40C/104F

. 40C

. AC-

FCC

.FCC- 15

)2( , )1( :

,Class B :

.FCC- 15

. 27

)2( . )1(

)4( . )3( . /

, ,FCC-

. " 20-

PowerWave Magnetic Pad Lite :

A2567 :

) FCC (

Fantasia Trading LLC :

Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 5350 :

1+ 800 988 7973 :

IC

.Industry Canada RSS-216

. 2019 5 RSS-Gen Innovation, RSS /

.Science and Economic Development Canada

. )1(

, )2(

. IC

." 20-

:RF-

28

. Customer Service A2567 Anker Innovations Limited ,

.EU/2011/65- EU/2014/53

/https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3-5, 80807 Munich, Germany ANKER TECHNOLOGY )UK( LTD Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom H A 2 V 12 /A 2 V 9 / A 3 V 5 W 10 /W 7.5 / W 5 40 C 10- C

-8.35dBuA/m )@10m(

RX/TX

) ( kHz 205110

. DE: Kundenservice ES: Atencin al Cliente FR: Service Client IT: Servizio Clienti PT: Servio de Apoio ao Clien RU:

TR: Mteri Hizmetleri JP: KO:

: :AR :HE

EN: 18-month limited warranty* | DE: 18 Monate beschrnkte Herstellergarantie*

ES: Garanta limitada de 18 meses* | FR: Garantie de 18 mois*

IT: Garanzia valida 18 mesi* | PT: 18 meses de garantia limitada RU: 18 | TR: 18 aylk snrl garanti JP: 18 () | KO:

18

: 18

: 18

18 :HE | 18 :AR

* EN: Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty. DE: Die gesetzlichen Gewhrleistungspflichten bleiben von der beschrnkten Herstellergarantie unberhrt. ES: Tenga en cuenta que los derechos que le conceden las leyes aplicables que rigen la venta de bienes de consumo no se ven afectados por las garantas que proporciona esta garanta limitada. FR: Notez que vos droits dans le cadre de la lgislation rgissant la vente de biens de consommation ne sont pas affects par les garanties accordes dans cette garantie limite. IT: Si prega di notare che i diritti del cliente ai sensi della legge applicabile in materia di vendita di beni di consumo non sono influenzati dalle garanzie concesse dalla presente Garanzia limitata. 29 30 EN: Lifetime technical support | DE: Lebenslanger technischer Support ES: Asistencia tcnica de por vida | FR: Support technique vie IT: Assistenza post-vendita a vita | PT: Suporte tcnico ao longo da vida til do produto RU:

TR: mr boyu teknik destek JP: | KO:

support@anker.com support.mea@anker.com (For Middle East and Africa Only)

(US) +1 (800) 988 7973 Mon-Fri 9:00am - 5:00pm (PT)

(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)

(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 - 11:00

( ) +86 400 0550 036 9:00 - 17:30

( ) 03 4455 7823 - 9:00 - 17:00

(Middle East & Africa) +971 42463266 Sun-Thu 9:00 - 17:30 (GMT+4)

(UAE) +971 8000320817 Sun-Thu 9:00 - 17:30 (GMT+4)

(KSA) +966 8008500030 Sun-Thu 8:00 - 16:30 (GMT+3)

(Kuwait) +965 22069086 Sun-Thu 8:00 - 16:30 (GMT+3)

(Egypt) +20 8000000826 Sun-Thu 7:00 - 15:30 (GMT+2) 31

Anker Innovations Limited Declaration concerning Antenna Specification It is hereby declared that the product Model No.: A2567 FCC ID : 2AOKB-A2567A fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for internal antenna type(s) described below:

Model No. of antenna: N/A Type of antenna:

Gain of the antenna:

Frequency range:

Inductive loop coil Antenna 0 dBi 111-205KHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name:

Address:

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Kowloon City:

ZIP / Postal code: N/A Country:

Place:

Hong Kong Kowloon Signature:

Date: 5/25/2021 version01