FCC ID: 2AOKB-Y2641 Rechargeable Wireless Keyboard

Important Safety Instructions This keyboard is not a toy. Keep away from children. Read and follow all instructions and warnings before use. Inspect the keyboard and charging cable before use. If any parts are damaged, contact Technical Support before resuming use. Do not open, disassemble, modify, drop, crush, puncture, incinerate, or shred the Bluetooth keyboard. The keyboard is not serviceable. Do not attempt to open, repair, or modify. To prevent a short circuit or other potential hazards, do not insert foreign metal objects into the keyboard or its ports. Keep the keyboard away from moisture and do not use it with wet hands. Moisture in or on the keyboard may lead to electrical shock. If exposed to moisture during use, turn off and unplug the charging cable immediately. Contact Technical Support before resuming use. The keyboard contains a lithium-ion battery. Keep away from heat sources and open flames. It is normal for the keyboard to become warm during operation. To prevent overheating, keep the area around the keyboard ventilated. Do not place anything on or around the keyboard during operation. Do not operate the keyboard near a heat source or in direct sunlight. Recommended for use in temperatures between

-5C and 50C. NEVER use in temperatures outside the range of -5C to 50C. If the keyboard begins to emit a strong odor, becomes hot to the touch, swells or expands, turn it off and unplug the keyboard immediately and contact Technical Support. If the battery inside the keyboard leaks for any reason, turn off and unplug the keyboard immediately. Do not allow the contents of the battery to contact your skin or eyes. In the event of contact, wash the affected area with large amounts of water and seek medical attention immediately. CARE AND STORAGE At a Glance Do not store your keyboard in areas of high temperatures (such as in your car) or in high humidity. Do not place heavy objects on top of the keyboard. Keep the keyboard away from oil, chemicals, and liquids. Clean the keyboard with a damp clean cloth. DISPOSAL Do not burn or dispose of your keyboard in a fire or incinerator. Do not throw your keyboard away in the trash. The keyboard contains a lithium ion battery. Contact your local electronics recycler to recycle the keyboard. Whats in the Box Rechargeable Wireless Keyboard Micro USB Cable 1. Caps Lock Indicator 2. Bluetooth Status Indicator 3. Connect Button 4. On/Off Slider 5.Charging Indicator 6. Power Indicator 7. USB power charging port Keys and Functions Speification Keys and Functions 1 2 3 4 5 6 7 Key Fn Functionality on Android Functionality on iOS Functionality on Windows Key Fn Functionality on Android Functionality on iOS Functionality on Windows ESC Key F1 F2 F3 F4 F5 Fn Lock Fn Lock Fn Lock Brightness - Brightness -

Brightness -

Brightness + Brightness +

Brightness +

Search Search Home Home Open the menu N/A Search Open Browser Open the menu F6 F7 F8 F9 F10 F11 F12 Back Previous Track Back Previous Track Previous Track Previous Track Pause/Play Pause/Play Pause/Play Next Track Next Track Next Track Mute Mute Mute Volume -

Volume -

Volume -

Volume +

Volume +

Volume +

Need help?

Were here for you every day from 7 a.m. - 9 p.m. CST. Give us a call at 1-888-516-2630 We'd love to hear from you. Scan with your Walmart app and let us know what you think TAAUSL100042338 6 8 1 1 3 1 3 9 7 3 2 2 01 02 03 04 05 06 Rechargeable Wireless Keyboard User Manual Powering On Your Keyboard Slide the On/Off slider to power on the keyboard. The power indicator will turn solid blue. Note: The keyboard will enter sleep mode after being idle for 30 minutes. Press any key to activate it. LED Indicator Guide catio1 Indicator LED Status Description Power Indicator Bluetooth Indicator Caps Lock Indicator Charging Indicator Solid blue (off after 3s) Powered on Flashing blue

(every 2s) Flashes blue Off Solid blue Low power Ready for pairing Paired successfully Caps function enabled Solid red Charging Solid green Fully charged Pairing Your Wireless Keyboard with Your Devices Pairing Your Wireless Keyboard with Your Devices Specifications catio1 Plug one end of the provided cable into the keyboard and the other into a power adapter (not provided). 1. Slide the On/Off button to turn on the keyboard. The power indicator will turn solid blue for 3 seconds and turn off to save power. 2. Press the Connect button on the keyboard. The Bluetooth indicator will flash blue. 3. Enable your devices Bluetooth function on your iOS/

Android/Windows device. A list of Bluetooth devices available will be displayed. 4. Select Rechargeable Wireless Keyboard. The keyboard will be paired with your device successfully. Note: The cable is used for charging your keyboard only. Operating Voltage 3.0V - 4.2V Operating Current

< 2 mA Standby Current 45 uA Operating Range

< 7.3 m Lithium Battery Capacity 280 mA Sleep Time

< 30 min Wakeup Time 3 sec Charging Voltage /

Current (Max) 5V / 200 mA Operating Temperature to 50

-5 Bluetooth Version BT 5.1 (BDR) Standby Time 90 days Working Time 90 hours Notice FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Notice CAUTION

(1) Reorient or relocate the receiving antenna.

(2) Increase the separation between the equipment and receiver.

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

(4) Consult the dealer or an experienced radio / TV technician for help. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973 The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. 07 08 09 10 11 12 13 14

FCC ID Label Location FCC ID: 2AOKB-Y2641 Note: The label is located on the back of the product, slightly above the middle.

Anker Innovations Limited Agent Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product Name: Rechargeable Wireless Keyboard Model Number(s): TAAUSL100042338 Product Description: Rechargeable Wireless Keyboard We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-03-19 Signature:

Name:

louis Qi Company: Anker Innovations Limited

Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID:

Date: 2021-03-15 2AOKB-Y2641 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: louis Qi Anker Innovations Limited