FCC ID: 2AOKB-T8030 S380 HomeBase

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005003397 V01 S330 eufyCam QUICK START GUIDE AT A GLANCE S330 eufyCam Model: T8160 S380 HomeBase Model: T8030 Spotlight Camera Lens Photosensitive Sensor Microphone 1 01 Solar Panel LED Indicator Microphone 2 Motion Sensor Speaker SYNC Button Mounting Hole USB-C Charging Port Status LED Reset Hole Speaker Hard Drive Bracket SYNC / ALARM OFF Button USB Port 1 USB Port 2 Ethernet Port Power Port 02 EXPANDING STORAGE

(OPTIONAL) S380 HomeBase comes with 16 GB of storage for saving video recordings and allows you to add an additional hard drive to expand the space. Install Your Hard Drive S380 HomeBase must be powered off when you install or remove a hard drive. 1. Push down the top lid to remove it. Prepare Your Hard Drive Your hard drive must meet the following requirements:

Type Size Capacity Hard disk drive (HDD) or solid state drive (SSD) that uses the SATA interface 2.5 inch Unlimited Recommended Western Digital, Seagate, SAMSUNG, Kingston, PNY, Crucial, SanDisk Transfer all the data in your hard drive to a secure location before adding it to S380 HomeBase. HARD DRIVE 2. Loosen the screw, then pull out the hard drive bracket. 03 04 3. Fix your hard drive to the bracket with the provided screws. SETTING UP 1. Power and connect S380 HomeBase to your router. The LED indicator will turn blue (This may take about 1 min) when S380 HomeBase is ready for setup. HARD DRIVE 4. Insert and screw the bracket back to S380 HomeBase, then put the top lid back into place. 2. Download and install the eufy Security app, then sign up for an account. You can follow the steps above to expand the storage whenever necessary. A new hard drive must be initialized through the eufy Security app to work with S380 HomeBase. 05 06 3. Follow on-screen instructions to add S380 HomeBase and the cameras to your device list(*). CHARGING THE CAMERA Fully charge both cameras before first use. This may take about 8 hours for each. USB Port 1 Option 1 5V USB Charger LED Indicator Blue OFF Option 2 Description Charging Fully charged

* One S380 HomeBase can pair up to 16 cameras. 07 08 S330 eufyCam includes a solar panel that converts sunlight into electrical energy and keeps the built-in battery charged every day. The charging efficiency fluctuates according to the intensity of the sunlight. Don't worry when the battery level goes down. It happens when there isn't enough sunlight or the camera is consuming more power than usual. You don't need to charge the camera with a cable until a low battery alarm goes off. 2 HOURS PER DAY*

09 10

* Make sure the solar panel can be fully exposed to direct sunlight for at least 2 hours per day. MOUNTING THE CAMERA Select a Location Select a location where you can get the desired view. We recommend hanging the camera 7-10 ft (2-3 m) above the ground. Camera Field-of-View t f 0 1

7

) m 3

2

Motion Motion Detection Detection Zone Zone Up to 26 ft (8 m) Best places to install:

- Wall without eaves

-A pole or fence where sunlight is not blocked

-Over eaves, if the eaves are below 3 m high Places not to install:

- Inside your home or under the porch

- Under or on a tree

- Under slanted eaves 11 12 Mount the Camera 1. Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it. 3. Firmly screw the knob of the mounting bracket into the mounting hole. 2. Drill holes with a 15/64 inch (6 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. 4. Hold and screw the camera to the mounting bracket. Rotate the camera to adjust the view and check it using the live stream, which you can access in the eufy Security app. For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status. 13 14 SAFETY

- Do not use the device in the environment at a too high or too low temperature, never expose the device to strong sunshine or too wet environment.

- The suitable temperature for T8030 and accessories is -10C to 45C .

- The suitable temperature for T8160 and accessories is -20C to 50C (Charging temperature is 0C to 45C) .

- It is recommended to supply the device in an environment with a temperature that ranges from 5C~25C.

- When supplying, please place the device in an environment that has a normal room temperature and good ventilation.

- The adapter shall be installed near the equipment and shall be easily accessible.

- Please ensure to use only the adapter offered by the manufacturer. Using unauthorized adapter may cause danger and violate the authorization of the device and the guarantee article.

- This adapter is for indoor use only. The adapter type (for S380 HomeBase) is KA2401A-1202000US, rated output voltage/current is 12 Vdc/2A. The plug is considered as disconnect device of adapter. Warning:

- Replacement of a battery with an incorrect type can defeat a safeguard;

- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion;

- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas; and

- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Attention:

remplacement dune batterie par un type incorrect pouvant supprimer une protection mise au rebut dune batterie dans un feu ou dans un four chaud, ou crasement mcanique ou coupure dune batterie, susceptible de provoquer une explosion;

maintien dune batterie dans un environnement trs haute temprature pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables;

et batterie soumise une pression de lair extrmement faible pouvant provoquer une explosion ou la fuite de liquide ou de gaz inflammables. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ATTENTION RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACE PAR UN TYPE INCORRECT. LIMINER LES BATTERIES USES SELON LES INSTRUCTIONS. 15 NOTICE NOTICE (United States of America) FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/

TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone:1-800-988-7973 16 NOTICE (Canada) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil nedoit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC RF Statement:

When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong 17 12-month limited warranty United States

+1 (800) 988 7973 Mon-Sat 6:15AM-6:45PM(PT) Sun 6:15AM-5:45PM(PT) United Kingdom

+44 (0) 1604 936 200 Mon-Sun 6:00-19:00 Germany

+49 (0) 69 9579 7960 Mo-Fr 8:00-16:00 Sa 9:00-16:00 support@eufylife.com

@EufyOfficial

@EufyOfficial

@EufyOfficial Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Limited Date: 2022/6/23 To: Federal Communications Commission Authorization & Evaluation Division, 7435 Ozkland Mills Road, Columbia, MD 21046 To Whom It May Concern The Anker Innovations Limited, the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd. , to act on the behalf of the Anker Innovations Limited solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AOKB-T8030 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Anker Innovations Limited in connection with the application shall have the same effect as acts of the Anker Innovations Limited. Anker Innovations Limited also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C 862 Thank you for your attention to this matter Yours Sincerely, Signatory Contact name: Louis Qi Tel: +86~-13652441319 Email; louis. gi@oceanwing . com Company name: Anker Innovations Limited

Anker Innovations Limited Date, 2022.6.23 To; Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Fe: Request of Confidentiality for FCC ID: 2AOKBT8030 To Whom it may concem Pursuant to sections 0.457 and 0.459 of Commission's Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Anker Innovations Limited hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors We are also hereby request Short-Term Confidentiality (max time 180 days fromm grant date) as outlined in Public Notice DAO41705. This provision will give Anker Innovations Limited temporary confidentiality of commercially sensitive information prior to product release The requested Permanent and ShortTerm Confidential exhibits are listed as follows PERMANENT AND SHORTTERM CONFIDENTIAL LIST Exhibit Description Block Diagram Operational Description PERMANENT Schernaties BOM External Photos Internal Photos SHORTTERM TestSetup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application Signatory Name: Louis Qi Company Name: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Tel, +86~13652441319 Email: louis.qi@oceenwing..com

Declaration To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AOKB-T8030 Don't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable Should you have any questions, please feel free to contact me. Date: 2022.6.23, Contact name: Louis Qi Tel: +86-13652441319 Email: louls.qi@oceanwing.com Company name: Anker Innovations Limited