QUICK START GUIDE SoloCam S340 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. XXXXXXXXX V01 AT A GLANCE SoloCam S340 Model: T8170 S Y N C LED Indicator Speaker Telephoto Lens Photosensitive Sensor PIR Sensor Microphone Wide-Angle Lens LED Light Solar Panel Mounting Hole Mounting Hook USB-C Charging Port SYNC Button 01 CHARGING YOUR CAMERA Fully charge before first use. SETTING UP THE SYSTEM 1. Download and install the eufy Security app, then sign in or create an account. SYNC 5V/2A Solid Blue Light Off Charging Time Charging Fully Charged 8 Hours 2. Follow the in-app instructions to add the camera to the device list. 02 03 MOUNTING YOUR CAMERA To ensure that no detection is missed, do not install the camera directly facing the monitoring area. Instead, maintain an angle to avoid any potential blind spots. Select a Location and a Height Select a location where you can get the desired view. We recommend hanging the camera 7-10 ft (2-3 m) above the ground. t f 0 1
7
) m 3
2
Up to 32 ft (10m) 04 05 Select a Solar Panel Location Option 1: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power) If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be mounted on a wall or on the ceiling. 06 07 1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes. 2. Connect the solar panel to the camera using the provided USB-C extension cable. SYNC 3. Firmly secure the camera onto the mounting bracket. PUSH PUSH P U S H 08 09 Be careful not to install by mistake. 4. Install the mounting bracket of the solar panel in a suitable position. PUSH P U S H PUSH P U S H 5. Install the solar panel onto its mounting bracket by turning it, then adjust the angle
(20~30 recommended). 10 11 1. Secure the solar panel's mounting bracket to the top of the camera. Option 2: Mount the Camera with the Solar Panel Attached (Less Drilling) If the camera is not blocked, install the solar panel directly on the top of the camera. 2. Install the solar panel onto the solar panel's mounting bracket by turning it. 12 13 3. Connect the USB-C connector to the USB-C port of the solar panel. PUSH SYNC 5. Firmly secure the camera onto the mounting bracket and adjust the angle
(20~30 recommended). 4. Drill holes with a 15/64 inch (5.95 mm) drill bit with the included positioning card, then insert the anchors into the holes. 14 15 SAFETY The suitable temperature for this device and accessories is -20C to 50C (Charging temperature is 0C to 40C). Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature. Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. It is recommended to supply the device in an environment with a temperature that ranges from 5C to 25C. When supplying power, place the device in an environment that has a normal room temperature and good ventilation. CAUTION!
THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. ATTENTION!
IL EXISTE UN RISQUE DEXPLOSION EN CAS DUTILISATION DUN TYPE DE PILE INCORRECT. LIMINEZ LES PILES USAGES CONFORMMENT AUX INSTRUCTIONS. Warning:
Replacing a battery with an incorrect type may bypass safeguards and create danger;
Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases. Attention :
Le remplacement dune batterie par un type incorrect peut contourner les protections et crer un danger ;
Llimination dune pile dans un feu ou une autre source de chaleur importante, ou par crasement ou dcoupage, peut entraner une explosion ainsi quune fuite de liquides et de gaz inflammables ;
Le fait de laisser une batterie dans un environnement extrmement chaud peut entraner une explosion ainsi quune fuite de liquides et de gaz inflammables ;
Une batterie soumise une pression dair extrmement faible peut provoquer une explosion ainsi quune fuite de liquides et de gaz inflammables. 16 17 NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for 18 help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20 cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004 Telephone: 1-800-988-7973 IC Statement This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. 19 IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maintenez une distance de 20 cm du corps afin de vous conformer aux exigences en matire d'exposition RF. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. CUSTOMER SERVICE 12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
) +86 400 0550 036
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030 support@eufy.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
@EufyOfficial
@EufyOfficial
@EufyOfficial 20