Model:A3122 User Manual Soundcore Icon Safety Instructions Avoid dropping. Do not disassemble. Avoid extreme temperatures. Do not use the device outdoors during thunderstorms. Use original or certified cables. Do not use any corrosive cleaner / oil to clean. Using Your Soundcore Icon 1. Turn On / Off ON OFF Press Press and hold for more than 2 second a. Bluetooth mode Flashing Blue Solid Blue Flashing White Solid White Bluetooth Pairing Mode Connected to a device Enter True Wireless Stereo Group Mode /
Disconnect True Wireless Stereo True Wireless Stereo Group Mode Connected to True Wireless Stereo With True Wireless Stereo technology, you can pair your Soundcore Icon with another Soundcore Icon to explore the best sound effects with left and right sound channels separated on both speakers. Play / Pause Play Next Song Play Previous Song Answer Call / End Call Reject Call / Switch between a call on hold and an active call End current call and answer incoming call / End current call and switch to call on hold Switch audio source between Speaker and Phone Put current call on hold and answer incoming call Activate Siri / Other Voice Control Software Volume Up / Down Solid White Flashing Blue On a Call Incoming Call When turned on, Soundcore Icon will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Icon from your devices Bluetooth history and ensure its less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker. b. AUX-In mode
*SoundLine AUX cable sold separately. Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device. 3. Charging your Soundcore Icon Slow Flashing Red Solid Red Low Battery Charging Off Fully Charged Use the included USB cable to charge your Soundcore Icon and make sure it is fully charged before its first use. Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods. When not in use, store your speaker in a cool place. Declaration of Conformity Hereby, Anker Innovations Limited declares that the radio equipment type A3122 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/products Maximum output power:1.5dBm Frequency band: 2.4G band (2.4000GHz-2.4835GHz) Specifications
*Specifications are subject to change without notice. Input Audio output Battery capacity Charging time 5 V 1 A 10w max. 2600 mAh 4.0 hours Playtime (varies by volume level and music content) 12hrs Size Weight (without packaging) Bluetooth version Bluetooth range Product Number A3122 182 x 61 x 62 mm /
7.2 x 2.4 x 2.4 inch 349 g / 12.3 oz V5.0 20 m / 66 ft Bluetooth Speaker / Soundcore Icon FCC Statement:
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IC NOTICE TO CANADIAN USERS:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device . Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003.
(Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.) Radiation Exposure Statement The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Dclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl.