FCC ID: 2AOKB-A1614 Wireless Charging Battery

LED Indicator Flashing white Wireless charging activated Solid white Charging wirelessly Wireless Charging Indicator ang Flashing white quickly Mee genet objects Off Wireless charging off Flashing white Battery input/output Battery Level Indicator Solid white Showing the current battery level Off No battery power Note: When your Magnetic Battery exceeds the temperature limit, the battery level indicator will turn off Let it cool down before use. Otterbox Defender cases.

+ Donot use an adapter with an output of SV/1A (SW) or less

+ Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.

+ High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25C. / 77F

+ Both the protective phone case and the position of your device on the wireless charger will afect the charging speed. The farther itis placed trom the center of the wireless charger, the slower the charging speed will be v + This wireless charger is not compatible with non-Magsafe phone cases, such a Important Safety Instructions When using this product, basicprecautions should always be followed, indu ding the following:

1D Storethe productin a cool and dry place. 2) Dont store the product in a hot or humid environment 3} Use of a power supply ot charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons. 4) Operating temper ature should be between OCto 40C / 32F to 104, 5) Do not disassemble the product. Take it to a qualified service person when service or repair is, required. Incorrect reassembly may result in arisk of fire or injury to persons. If the productis not used for long periods of time, you should charge and discharge it once every three months P When charging a device, the product may feel watmn. This is a normal operating condition and should not be a cause tor concern. In normal conditions, the battery performance will decline over several years a Do not dispose of the product in heat or fire 10) Do not dean the product with harmful chemicals or detergents 11) Misuse, dropping, ot excessive force may cause product damage 12) When disposing of secondary cells or batteries, keep calls ot batteries of diferent electrochemical systems separate from each other. 18) Be awarethat a discharged battery may cause fire or smoke. Tape the terminals to insulate them. FCC Statement This device oomplies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and (2) this device must accept any interference received, induding interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to oomply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reason able protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequen gy energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to cotrect the interterence by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation bebween the equipment and receiver. @) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer ot an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCCradiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20em between the radiator S-your body. Model: A1614 The following importer is the responsible party (for FCC matters onhy. Company Name: Fantasia Trading LLC 02 Address: $250 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 Warning Magnet only provides wireless charging ooll positioning and cannot be used as a mobile phone battery. Notes to users: Recommended to be placed on the table during charging. IC Statement This device complies with RSS-216 of Industry Can ada. Operation is subject to the condition that this device does not cause harmful interference Dclaration d'Industrie Canada Cet apparell est conforme ala norme RSS-216 d'Industrie Canada Son utilisation est sujette aux conditions voulant que cet apparell ne cause aucune interfrence nuisible. RSS-Gen Issue 5 February2021 This device contains licence-exempt transmitter(s)/recaiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(). Operation is subject tothe following two conditions:

(D This device may not cause interference

@ This device must accept any interference, including interference that may cause undesired operation of the device Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment, RSS-Gen numro 5 Fvrier 2021 Cat apparell contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'innovation, Sciences et Dveloppement conomique Canada. Le fonctionnem ent est sournis aux deux conditions suivantes:

1) Cet apparel ne doit pas causer d'ntertrences,

@ Cet appateil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnementindsirable de 'appareil Tout changement ou modification non expressment approuv parla partie responsable de la conformit pourrait annuler'autorit de l'utilisateur a utiliser @quipenent, RF exposure statement The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with aminimum distance of 20cm between the radiator and your body. 08 This device complies with Industry Canada license-ICES-O08, Operation is subject tothe following two conditions: (D) This device may not cause interference, and (2) This device must accept any interference, indu ding interference that may cause undesired operation of the device This digital apparatus complies with CAN ICES-008 (6) NMB-003@), Leprsent appareil est conforme aux CNR d Innovation, Sdences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes

) Napparell nedoit pas produire de brouillage, et

@ Cutilisateur de l'appareil dott accepter tout brouillage radiodlectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement C product complies with the radio interference requirements of the European Community EU Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A1610/is in compliance with Directives 2014/53/EU & 2011/65 /EU. The full text of the EU declaration of conformity is, available at the following internet address:

https: wvww.anker.com/

This symbol indicates that this product shall not betreated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and meee chronic equipment GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A16101s in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous, Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address:

https: Awww. anker.com UK This device was tested for typical body-worn operations, To comply with RF exposure CR euirerents, aminimum separation distance of 20mm must be maintained between the user's body and the handset, induding the antenna Third-party belt-dlps, holsters, and similar aocessories used by this device should not contain any metallic com ponents. Body-

worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna, This device is in compliance with the essential requirements and other relevant provisions of UKCA, All essential radio test suites have been carried out 04

Anker Innovations Limited Model: A1614 FCC ID2AOKB-A1614 IC ID23451-A1614 Page 1 of1 Report Version 1

Anker Innovations Limited August 05,2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (CVC Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely,

Anker Innovations Limited August 05,2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Wireless Charging Battery/

MODELA1614 AND FCC ID2AOKB- A1614) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Operational DescriptionBlock Diagram Schematic Diagram) required to be submitted with this application be permanently withheld from public review. the above documents are company proprietary information that could never get into the possession of your competition Please contact me if there is any information you may need. Sincerely,