FCC ID: BCG-E2816A Apple iPhone 6 (A1549 A1586)

 

Specific Absorption Rate SAR Statement:

iPhone has been tested and meets applicable limits for radio frequency

(RF) exposure.

(SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set the limit averaged over 10 grams of tissue. During testing, iPhone radios are set to their highest transmission levels and placed in positions that simulate use against the head, with no separation, and near the body, with 5mm separation. Depending on the dimensions of the device, additional SAR limits may apply. To reduce exposure to RF energy, use a hands-free option, such as the built-in speakerphone, the supplied headphones, or other similar accessories. Carry iPhone at least 5mm away from your body to ensure exposure levels remain at or below the as-tested levels. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. SAR values for this device are available at:

www.apple.com/legal/rfexposure/produ ct type Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your networks. service providers wireless and roaming

 

 

APPLE CONFIDENTIAL iPhone User Guide For iOS 8 Software Draft APPLE CONFIDENTIAL Contents 8 8 8 9 9 11 12 Chapter 1: iPhone at a Glance iPhone overview Accessories Multi-Touch screen Buttons Status icons SIM card Set up and activate iPhone Connect iPhone to your computer Connect to Wi-Fi Connect to the Internet Apple ID iCloud Set up other mail, contacts, and calendar accounts 13 Chapter 2: Getting Started 13 13 14 14 15 15 16 17 Manage content on your iOS devices 17 18 Date and time 18 18 19 International settings Your iPhone name View this user guide on iPhone Sync with iTunes Voice Control Search Control Center 20 Chapter 3: Basics 20 Use apps Continuity 22 Customize iPhone 23 24 Type text 27 Dictate 28 28 29 29 Alerts and Notification Center 31 31 Do Not Disturb 31 34 34 34 35 AirPlay 35 AirPrint 36 Use an Apple headset Sharing iCloud Drive Transfer files Personal Hotspot Sounds and silence 2 Draft APPLE CONFIDENTIAL 36 37 37 38 41 41 Bluetooth devices Restrictions Privacy Security Charge and monitor the battery Travel with iPhone 43 Chapter 4: Siri 43 Make requests 44 44 Make corrections 44 Siri settings Tell Siri about yourself 46 Chapter 5: Phone 46 49 50 50 50 50 51 Phone calls Visual voicemail Contacts Call forwarding, call waiting, and caller ID Ringtones and vibrations International calls Phone settings Finish a message later See important messages 53 Chapter 6: Mail 53 Write messages 54 Get a sneak peek 54 55 55 Attachments 56 Work with multiple messages 56 57 57 Mail settings See and save addresses Print messages Safari at a glance Search the web Browse the web Keep bookmarks Save a reading list for later Shared links and subscriptions Fill in forms 58 Chapter 7: Safari 58 58 59 60 60 61 61 62 Avoid clutter with Reader 62 63 Privacy and security Safari settings 64 Chapter 8: Music 64 Get music 64 66 67 68 Album Wall iTunes Radio Browse and play iCloud and iTunes Match Contents 3 Draft APPLE CONFIDENTIAL Playlists 68 Audiobooks 68 69 Geniusmade for you 69 Siri and Voice Control 70 Home Sharing 70 Music settings 71 Chapter 9: Messages SMS, MMS, and iMessage 71 72 Send and receive messages 73 Manage conversations 73 74 Messages settings Share photos, videos, your location, and more Calendar at a glance Invitations 75 Chapter 10: Calendar 75 75 76 Use multiple calendars 77 Share iCloud calendars Calendar settings 77 iCloud Photo Library 78 Chapter 11: Photos 78 View photos and videos 79 Organize your photos and videos 79 80 My Photo Stream 80 82 Other ways to share photos and videos 82 83 84 Edit photos and trim videos Print photos Photos settings iCloud Photo Sharing Camera at a glance Take photos and videos 85 Chapter 12: Camera 85 86 88 HDR 88 89 View, share, and print Camera settings 90 Chapter 13: Weather 92 Chapter 14: Clock 92 Clock at a glance 93 Alarms and timers Find places 94 Chapter 15: Maps 94 95 Get more info 95 Get directions 96 3D and Flyover 96 Maps settings Contents 4 Draft APPLE CONFIDENTIAL Videos at a glance 97 Chapter 16: Videos 97 98 Add videos to your library 98 99 Control playback Videos settings 100 Chapter 17: Notes 100 Notes at a glance 101 Use notes in multiple accounts 102 Chapter 18: Reminders 103 Scheduled reminders 103 Location reminders 103 Reminders settings 104 Chapter 19: Stocks 106 Chapter 20: Game Center 106 Game Center at a glance 107 Play games with friends 107 Game Center settings 108 Chapter 21: Passbook 108 Passbook at a glance 108 Passbook on the go 109 Stockholm 110 Passbook settings iTunes Store at a glance 111 Chapter 22: iTunes Store 111 111 Browse or search 113 Purchase, rent, or redeem 113 iTunes Store settings 115 Chapter 23: App Store 115 App Store at a glance 115 Find apps 116 Purchase, redeem, and download 117 App Store settings 118 Chapter 24: Voice Memos 118 Voice Memos at a glance 118 Record 119 Play it back 119 Move recordings to your computer 120 Chapter 25: FaceTime 120 FaceTime at a glance 120 Make and answer calls 121 Manage calls Contents 5 Draft APPLE CONFIDENTIAL 122 Chapter 26: Newsstand 122 Newsstand at a glance 123 Chapter 27: Podcasts 123 Podcasts at a glance 123 Get podcasts and episodes 124 Control playback 125 Organize your favorites into stations 125 Podcasts settings 126 Chapter 28: Health 126 Your health at a glance 126 Collect health and fitness data 127 Share health and fitness data 127 Create an emergency medical ID 128 Chapter 29: iBooks 128 Get books 128 Read a book 130 Organize books 130 Read PDFs 130 iBooks settings 132 Chapter 30: Contacts 132 Contacts at a glance 133 Use Contacts with Phone 133 Add contacts 134 Unify contacts 134 Contacts settings 135 Chapter 31: Calculator 136 Chapter 32: Compass 136 Compass at a glance 137 On the level 138 Chapter 33: Nike + iPod 138 At a glance 138 Link and calibrate your sensor 139 Work out 139 Nike + iPod Settings 140 Appendix A: Accessibility 140 Accessibility features 141 Accessibility Shortcut 141 VoiceOver 152 Zoom 153 154 Speak Selection 154 Speak Screen 154 Speak Auto-text 154 Large, bold, and high-contrast text Invert Colors and Grayscale Contents 6 Draft APPLE CONFIDENTIAL 154 Button Shapes 155 Reduce screen motion 155 On/off switch labels 155 Assignable ringtones and vibrations 155 Video Descriptions 155 Hearing aids 157 Mono audio and balance 157 Subtitles and closed captions 157 Siri 157 Widescreen keyboards 158 Large phone keypad 158 LED Flash for Alerts 158 Call audio routing 158 Phone noise cancelation 158 Guided Access 159 Switch Control 162 AssistiveTouch 164 TTY support 164 Visual voicemail 164 Voice Control 164 Accessibility in OS X 165 Appendix B: International Keyboards 165 Use international keyboards 166 Special input methods 168 Appendix C: iPhone in Business 168 Mail, Contacts, and Calendar 168 Network access 168 Apps Important safety information Important handling information iPhone Support site 170 Appendix D: Safety, Handling, & Support 170 172 173 173 Restart or reset iPhone 173 Reset iPhone settings 174 Get information about your iPhone 174 Usage information 174 Disabled iPhone 175 Back up iPhone 176 Update and restore iPhone software 176 Cellular settings 177 Sell or give away iPhone?

177 Learn more, service, and support 178 FCC compliance statement 179 Canadian regulatory statement 179 Disposal and recycling information 181 Apple and the environment Contents 7 Draft APPLE CONFIDENTIAL iPhone at a Glance 1 iPhone overview This guide describes the features of iOS 8, and of iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, and . FaceTime camera Receiver/front microphone Ring/Silent switch Volume buttons App icons Multi-Touch display Headset jack Bottom microphone LED flash Sleep/Wake button iSight camera Rear microphone Statusbar SIM card tray Homebutton/

Touch ID sensor Speaker Lightning connector Your iPhone features and apps may vary depending on the model of iPhone you have, and on your location, language, and carrier. To find out which features are supported in your area, see www.apple.com/ios/feature-availability. Note: Apps and services that send or receive data over a cellular network may incur additional fees. Contact your carrier for information about your iPhone service plan and fees. Accessories The following accessories are included with iPhone:

Apple headset. Use the Apple EarPods with Remote and Mic (iPhone 5 or later) or the Apple Earphones with Remote and Mic (iPhone 4s) to listen to music and videos, and make phone calls. See Use an Apple headset on page 36. 8 Receiver/frontmicrophoneBottom microphoneRing/SilentswitchFaceTime cameraVolumebuttonsMulti-TouchdisplayHomebutton/Touch IDsensorHeadsetjackSleep/WakebuttonRearmicrophoneSIM cardtrayLED flashiSight cameraApp iconsStatusbarLightning connectorSpeakerDraft APPLE CONFIDENTIAL Connecting cable. Use the Lightning to USB Cable (iPhone 5 or later) or the 30-pin to USB Cable

(iPhone 4s) to connect iPhone to your computer to sync and charge. Apple USB power adapter. Use with the Lightning to USB Cable or the 30-pin to USB Cable to charge the iPhone battery. SIM eject tool. Use to eject the SIM card tray. (Not included in all areas.) Multi-Touch screen A few simple gesturestap, drag, swipe, and pinch/stretchare all you need to use iPhone and its apps. Buttons Most of the buttons you use with iPhone are virtual ones on the touchscreen. A few physical buttons control basic functions, such as turning iPhone on or adjusting the volume. Sleep/Wake button When youre not using iPhone, press the Sleep/Wake button to lock iPhone. Locking iPhone puts the display to sleep, saves the battery, and prevents anything from happening if you touch the screen. You can still get phone calls, FaceTime calls, text messages, alarms, and notifications. You can also listen to music and adjust the volume. Sleep/Wake button Chapter 1 iPhone at a Glance 9 Sleep/Wake buttonDraft APPLE CONFIDENTIAL iPhone locks automatically if you dont touch the screen for a minute or so. To adjust the timing, go to Settings > General > Auto-Lock. Turn iPhone on. Press and hold the Sleep/Wake button until the Apple logo appears. Unlock iPhone. Press either the Sleep/Wake or Home button, then drag the slider. Turn iPhone off. Press and hold the Sleep/Wake button until the slider appears, then drag the slider. For additional security, you can require a passcode to unlock iPhone. Go to Settings > Touch ID

& Passcode (iPhone models with Touch ID) or Settings > Passcode (other models). See Use a passcode with data protection on page 38. Home button The Home button takes you to the Home screen, and provides other convenient shortcuts. Image

"file:///svn/apd-projectfiles/Sweet/iPhone_iPod_touch/

content/branches/Okemo/iPhone/en.lproj//Art/

AAG_homeBtn_P1.ai"

not found. See apps youve opened. Double-click the Home button. See Start at home on page 20. Use Siri (iPhone 4s or later) or Voice Control. Press and hold the Home button. See Voice Control on page 28 and Chapter 4, Siri, on page 43. On iPhone models with Touch ID, you can use the sensor in the Home button to read your fingerprint, instead of using your passcode or Apple ID password for unlocking iPhone or making purchasing in iTunes Store or App Store. If you have, you can also use the Touch ID sensor for contactless card purchases. See Touch ID sensor on page 39 and Stockholm on page 109. You can also use the Home button to turn accessibility features on or off. See Accessibility Shortcut on page 141. Volume controls When youre on the phone or listening to songs, movies, or other media, the buttons on the side of iPhone adjust the audio volume. Otherwise, the buttons control the volume for the ringer, alerts, and other sound effects. WARNING: For important information about avoiding hearing loss, see Important safety information on page 170. Lock the ringer and alert volumes. Go to Settings > Sounds and turn off Change with Buttons. To limit the volume for music and videos, go to Settings > Music > Volume Limit. Note: In some European Union (EU) countries, iPhone may warn that youre setting the volume above the EU recommended level for hearing safety. To increase the volume beyond this level, you may need to briefly release the volume control. To limit the maximum headset volume to this level, go to Settings > Music > Volume Limit and turn on EU Volume Limit. To prevent changes to the volume limit, go to Settings > General > Restrictions. You can also use either volume button to take a picture or record a video. See Take photos and videos on page 86. Chapter 1 iPhone at a Glance 10 Draft APPLE CONFIDENTIAL Ring/Silent switch Flip the Ring/Silent switch to put iPhone in ring mode or silent mode

. In ring mode, iPhone plays all sounds. In silent mode, iPhone doesnt ring or play alerts and other sound effects. Important: Clock alarms, audio apps such as Music, and many games play sounds through the built-in speaker, even when iPhone is in silent mode. In some areas, the sound effects for Camera and Voice Memos are played, even if the Ring/Silent switch is set to silent. For information about changing sound and vibration settings, see Sounds and silence on page 31. Use Do Not Disturb. You can also silence calls, alerts, and notifications using Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap Disturb on page 31.

. See Do Not Status icons The icons in the status bar at the top of the screen give information about iPhone:

Status icon Cell signal Airplane mode LTE UMTS UMTS/EV-DO EDGE GPRS/1xRTT What it means Youre in range of the cellular network and can make and receive calls. If theres no signal, No service appears. Airplane mode is onyou cant make phone calls, and other wireless functions may be disabled. See Travel with iPhone on page 41. Your carriers LTE network is available, and iPhone can connect to the Internet over that network. (iPhone 5 or later. Not available in all areas.) See Cellular settings on page 176. Your carriers 4G UMTS (GSM) or LTE network (depending on carrier) is available, and iPhone can connect to the Internet over that network. (iPhone 4s or later. Not available in all areas.) See Cellular settings on page 176. Your carriers 3G UMTS (GSM) or EV-DO (CDMA) network is available, and iPhone can connect to the Internet over that network. See Cellular settings on page 176. Your carriers EDGE (GSM) network is available, and iPhone can connect to the Internet over that network. See Cellular settings on page 176. Your carriers GPRS (GSM) or 1xRTT (CDMA) network is available, and iPhone can connect to the Internet over that network. See Cellular settings on page 176. Wi-Fi iPhone is connected to the Internet over a Wi-Fi network. See Connect to Wi-Fi on page 14. Do Not Disturb Do Not Disturb is turned on. See Do Not Disturb on page 31. Personal Hotspot iPhone is providing a Personal Hotspot for another device. See Personal Hotspot on page 34. Syncing iPhone is syncing with iTunes. Network activity Shows that theres network activity. Some third-party apps may also use it to show an active process. Chapter 1 iPhone at a Glance 11 Draft APPLE CONFIDENTIAL Status icon Call Forwarding VPN TTY What it means Call Forwarding is set up. See Call forwarding, call waiting, and caller ID on page 50. Youre connected to a network using VPN. See Network access on page 168. iPhone is set to work with a TTY machine. See TTY support on page 164. Portrait orientation lock The iPhone screen is locked in portrait orientation. See Change the screen orientation on page 22. Alarm An alarm is set. See Alarms and timers on page 93. Location Services An item is using Location Services. See Privacy on page 37. Bluetooth Blue or white icon: Bluetooth is on and paired with a device. Gray icon: Bluetooth is on. If iPhone is paired with a device, the device may be out of range or turned off. No icon: Bluetooth is turned off. See Bluetooth devices on page 36. Bluetooth battery Shows the battery level of a paired Bluetooth device. Battery Shows the iPhone battery level or charging status. See Charge and monitor the battery on page 41. SIM card If you were given a SIM card to install, install it before setting up iPhone. Important: A Micro-SIM card (iPhone 4s) or a Nano-SIM card (iPhone 5 or later) is required to use cellular services when connecting to GSM networks and some CDMA networks. An iPhone 4s or later thats been activated on a CDMA wireless network may also use a SIM card for connecting to a GSM network, primarily for international roaming. Your iPhone is subject to your wireless service providers policies, which may include restrictions on switching service providers and roaming, even after conclusion of any required minimum service contract. Contact your wireless service provider for more details. Availability of cellular capabilities depends on the wireless network. SIM card tray Paper clip or SIM eject tool SIM card Chapter 1 iPhone at a Glance 12 SIM cardSIM cardtrayPaper clipor SIMeject toolDraft APPLE CONFIDENTIAL Getting Started 2 Set up and activate iPhone WARNING: To avoid injury, read Important safety information on page 170 before using iPhone. Activation can be done over a Wi-Fi network or, with iPhone 4s or later, over your carriers cellular network (not available in all areas). If neither option is available, you need to connect iPhone to your computer and use iTunes to activate iPhone (see the following section). Set up and activate iPhone. Turn on iPhone and follow the Setup Assistant. The Setup Assistant steps you through the process, including:

Connecting to a Wi-Fi network Signing in with or creating a free Apple ID (needed for many features, including iCloud, FaceTime, the App Store, the iTunes Store, and more) Entering a passcode Setting up iCloud and iCloud Keychain Turning on recommended features such as Location Services and Find My iPhone Adding a credit or debit card to Passbook to use with Stockholm (N56/N61) Activating iPhone with your carrier You can also restore from an iCloud or iTunes backup during setup. Note: If Find My iPhone is turned on during setup, Activation Lock is engaged to help prevent anyone else from activating your iPhone, even if it is completely restored. Before you sell or give away your iPhone, you should reset it to erase your personal content and turn off Activation Lock. See Sell or give away iPhone? on page 177. Some carriers let you unlock iPhone for use with their network. To see if your carrier offers this option, see support.apple.com/kb/HT1937. Contact your carrier for authorization and setup information. You need to connect iPhone to iTunes to complete the process. Additional fees may apply. For more information, see support.apple.com/kb/HT5014. Connect iPhone to your computer You may need to connect iPhone to your computer in order to complete activation. Connecting iPhone to your computer also lets you sync photos and other content to iPhone from your computer, using iTunes. See Sync with iTunes on page 17. To use iPhone with your computer, you need:

An Internet connection for your computer (broadband is recommended) A Mac or a PC with a USB 2.0 or 3.0 port, and one of the following operating systems:

OS X version 10.7.5 or later 13 Draft APPLE CONFIDENTIAL Windows 8, Windows 7, Windows Vista, or Windows XP Home or Professional with Service Pack 3 or later Connect iPhone to your computer. Use the Lightning to USB Cable (iPhone 5 or later) or 30-pin to USB Cable (iPhone 4s) provided with iPhone. Youll be asked on each device to verify trust of the other device. appears at the top of the screen, youre connected to a Wi-Fi network. iPhone reconnects Connect to Wi-Fi If anytime you return to the same location. Configure Wi-Fi. Go to Settings > Wi-Fi. Choose a network: Tap one of the listed networks and enter the password, if asked. Ask to join networks: Turn on Ask to Join Networks to be prompted when a Wi-Fi network is available. Otherwise, you must manually join a network when a previously used network isnt available. Forget a network: Tap next to a network youve joined before, then tap Forget this Network. Join a closed Wi-Fi network: Tap Other, then enter the name of the closed network. You must already know the network name, security type, and password (if required). Adjust the settings for a Wi-Fi network: Tap next to a network. You can set an HTTP proxy, define static network settings, turn on BootP, or renew the settings provided by a DHCP server. Set up your own Wi-Fi network. If you have an unconfigured AirPort base station turned on and within range, you can use iPhone to set it up. Go to Settings > Wi-Fi and look for Set up an AirPort base station. Tap your base station and the Setup Assistant will do the rest. Manage an AirPort network. If iPhone is connected to an AirPort base station, go to Settings >

Wi-Fi, tap downloaded AirPort Utility, tap OK to open the App Store and download it. next to the network name, then tap Manage this Network. If you havent yet Connect to the Internet iPhone connects to the Internet whenever necessary, using a Wi-Fi connection (if available) or your carriers cellular network. For information about connecting to a Wi-Fi network, see Connect to Wi-Fi, above. When an app needs to use the Internet, iPhone does the following, in order:

Connects over the most recently used available Wi-Fi network Shows a list of Wi-Fi networks in range, and connects using the one you choose Connects over the cellular data network, if available Chapter 2 Getting Started 14 Draft APPLE CONFIDENTIAL Note: If a Wi-Fi connection to the Internet isnt available, apps and services may transfer data over your carriers cellular network, which may result in additional fees. Contact your carrier for information about your cellular data plan rates. To manage cellular data usage, see Cellular settings on page 176. Apple ID An Apple ID is the email address you use to sign in for just about everything you do with Apple, including using iCloud to store your content, downloading apps from the App Store, and buying songs, movies, and TV shows from the iTunes Store. You need only one Apple ID for everything you do with Apple. If you have an Apple ID, use it when you first set up iPhone, and whenever you need to sign in to use an Apple service. If you dont already have an Apple ID, you can create one when youre asked to sign in. Create an Apple ID. Go to Settings > iTunes & App Stores and tap Sign In. If youre already signed in and want to create another Apple ID, first tap your Apple ID, then tap Sign Out. For more information, see appleid.apple.com. iCloud iCloud offers free mail, contacts, calendar, and other services that you can set up simply by signing in to iCloud with your Apple ID, then making sure that the services you want to use are turned on. Set up iCloud. Go to Settings > iCloud. Create an Apple ID if needed, or use your existing one. iCloud stores your photos and videos, documents, music, calendars, contacts, and more. Content stored in iCloud is pushed wirelessly to your other iOS devices and computers signed in to iCloud with the same Apple ID. iCloud is available on devices with iOS 5 or later, on Mac computers with OS X Lion v10.7.2 or later, and on PCs with the iCloud Control Panel for Windows (Windows 7 or Windows 8 is required). Note: iCloud may not be available in all areas, and iCloud features may vary by area. For more information, see www.apple.com/icloud. iCloud features include:

Music, Movies, TV Shows, Apps, and Books. Automatically get iTunes purchases on all your iCloud devices, or download previous iTunes music and TV show purchases for free, anytime. With an iTunes Match subscription, all your music, including music youve imported from CDs or purchased somewhere other than iTunes, can also be stored in iCloud and played on demand. See iCloud and iTunes Match on page 67. Download previous App Store and iBooks Store purchases to iPhone for free, anytime. Photos. Use iCloud Photo Library to store all your photos and videos in iCloud, and access them from any device. Use iCloud Photo Sharing to share photos and videos with just the people you choose, and let them add photos, videos, and comments. See iCloud Photo Library on page 79. Chapter 2 Getting Started 15 Draft APPLE CONFIDENTIAL Family Sharing. With Family Sharing, up to six family members can share purchases from iTunes, iBooks, and the App Store. Pay for family purchases with the same credit card and approve kids spending right from a parents device. Share photos, a family calendar, and more. See Family Sharing on page 32. iCloud Drive. Safely store your presentations, spreadsheets, PDFs, images, and other documents in iCloud, and access them from your iPhone, iPad, iPod touch, Mac, or PC. See iCloud Drive on page 34. Documents in the Cloud. For iCloud-enabled apps, keep documents and app data up to date across all your devices. Mail, Contacts, Calendars. Keep your mail contacts, calendars, notes, and reminders up to date across all your devices. Safari Tabs. See the tabs you have open on your other iOS devices and OS X computers. See Browse the web on page 59. Backup. Back up iPhone to iCloud automatically when connected to power and Wi-Fi. All iCloud data and backups sent over the Internet are encrypted. See Back up iPhone on page 175. Find My iPhone. Locate your iPhone on a map, display a message, play a sound, lock the screen, suspend your digital credit card accounts, or remotely wipe the data. Find My iPhone includes Activation Lock, which requires your Apple ID and password in order to turn off Find My iPhone or erase your device. Your Apple ID and password are also required before anyone can reactivate your iPhone. See Find My iPhone on page 40. Find My Friends. Share your location with people who are important to you. Download the free app from the App Store. iCloud Keychain. Keep your passwords and credit card information up to date across all your designated devices. See iCloud Keychain on page 39. With iCloud, you get a free email account and 5 GB of storage for your mail, documents, and backups. Your purchased music, apps, TV shows, and books, as well as your photo streams, dont count against your available space. You must be signed in to iCloud to use Stockholm (n56/n61). See Stockholm on page 109. Buy more iCloud storage. Go to Settings > iCloud > Storage, then tap Change Storage Plan. For information about purchasing iCloud storage, see help.apple.com/icloud. View and download previous purchases, or get purchases shared by your family. iTunes Store purchases: You can access your purchased songs and videos in the Music and Videos apps. Or, in iTunes Store, tap More, then tap Purchased. App Store purchases: Go to App Store, tap Updates, then tap Purchased. iBooks Store purchases: Go to iBooks, tap Store, then tap Purchased. Turn on Automatic Downloads for music, apps, or books. Go to Settings > iTunes & App Stores. For more information about iCloud, see www.apple.com/icloud. For support information, see www.apple.com/support/icloud. Set up other mail, contacts, and calendar accounts iPhone works with Microsoft Exchange, and many of the most popular Internet-based mail, contacts, and calendar service providers. Set up an account. Go to Settings > Mail, Contacts, Calendars > Add Account. Chapter 2 Getting Started 16 Draft APPLE CONFIDENTIAL You can add contacts using an LDAP or CardDAV account, if your company or organization supports it. See Add contacts on page 133. You can add calendars using a CalDAV calendar account, and you can subscribe to iCalendar (.ics) calendars or import them from Mail. See Use multiple calendars on page 76. Manage content on your iOS devices You can transfer information and files between your iOS devices and computers, using iCloud or iTunes. iCloud stores your photos and videos, documents, music, calendars, contacts, and more, and wirelessly pushes it to your other iOS devices and computers, keeping everything up to date. See iCloud below. iTunes syncs music, video, photos, and more, between your computer and iPhone. Changes you make on one device are copied to the other when you sync. You can also use iTunes to sync files and documents. See Sync with iTunes on page 17. You can use iCloud or iTunes, or both, depending on your needs. For example, you can use iCloud to automatically keep your contacts and calendars up to date on all your devices, and use iTunes to sync music from your computer to iPhone. Important: To avoid duplicates, keep contacts, calendars, and notes in sync using iCloud or iTunes, but not both. You can also manually manage content from iTunes, in the devices Summary pane. This lets you add songs and videos, by choosing a song, video, or playlist from your iTunes library and then dragging it to your iPhone in iTunes. This is useful if your iTunes library contains more items than can fit on your device. Sync with iTunes Syncing with iTunes copies information from your computer to iPhone, and vice versa. You can sync by connecting iPhone to your computer, or you can set up iTunes to sync wirelessly with Wi-Fi. You can set iTunes to sync music, videos, apps, photos, and more. For help syncing iPhone, open iTunes on your computer, then choose iTunes Help from the Help menu and select Sync your iPod, iPhone, or iPad. Sync wirelessly. Connect iPhone. Then in iTunes on your computer, select your iPhone, click Summary, and select Sync with this iPhone over Wi-Fi. If Wi-Fi syncing is turned on, iPhone syncs when its connected to a power source, both iPhone and your computer are on and connected to the same wireless network, and iTunes is open on the computer. Tips for syncing with iTunes on your computer Connect iPhone to your computer, select it in iTunes, and set options in the different panes. In the Summary pane, you can set iTunes to automatically sync iPhone when its attached to your computer. To temporarily override this setting, hold down Command and Option (Mac) or Shift and Control (PC) until you see iPhone appear in the iTunes window. Chapter 2 Getting Started 17 Draft APPLE CONFIDENTIAL In the Summary pane, select Encrypt iPhone backup if you want to encrypt the information stored on your computer when iTunes makes a backup. Encrypted backups are indicated by a lock icon

, and a password is required in order to restore the backup. If you dont select this option, other passwords (such as those for mail accounts) arent included in the backup and youll have to reenter them if you use the backup when restoring iPhone. In the Info pane, when you sync mail accounts, only the settings are transferred from your computer to iPhone. Changes you make to a mail account on iPhone dont affect the account on your computer. In the Info pane, click Advanced to select options that let you replace the information on iPhone with the information from your computer during the next sync. In the Music pane, you can sync music using your playlists. In the Photo pane, you can sync photos and videos from a supported application or folder on your computer. If you use iCloud to store your contacts, calendars, and bookmarks, dont also sync them to iPhone using iTunes. If you turn on iCloud Photo Library, you cant use iTunes to sync photos and videos. Date and time The date and time are usually set for you based on your locationtake a look at the Lock screen to see if theyre correct. Set whether iPhone updates the date and time automatically. Go to Settings > General > Date

& Time, then turn Set Automatically on or off. If you set iPhone to update the time automatically, it gets the correct time over the cellular network and updates it for the time zone youre in. Some carriers dont support network time, so in some areas iPhone may not be able to automatically determine the local time. Set the date and time manually. Go to Settings > General > Date & Time, then turn off Set Automatically. Set whether iPhone shows 24-hour time or 12-hour time. Go to Settings > General > Date &

Time, then turn 24-Hour Time on or off. (24-Hour Time may not be available in all areas.) International settings Go to Settings > General > Language & Region to set:

The language for iPhone The preferred language order for apps and websites The region format The calendar format Advanced settings for dates, times, and numbers To add a keyboard for another language, go to Settings > General > Keyboard > Keyboards. For more information, see Use international keyboards on page 165. Your iPhone name The name of your iPhone is used by both iTunes and iCloud. Change the name of your iPhone. Go to Settings > General > About > Name. Chapter 2 Getting Started 18 Draft APPLE CONFIDENTIAL View this user guide on iPhone You can view the iPhone User Guide on iPhone in Safari, and in the iBooks app. View the user guide in Safari. Tap see a bookmark, go to help.apple.com/iphone.) Add an icon for the guide to the Home screen: Tap View the guide in a different language: Tap Change Language at the bottom of the home page. View the user guide in iBooks. Open iBooks and tap Store. Search for iPhone User, then select and download the guide.

, then tap the iPhone User Guide bookmark. (If you dont

, then tap Add to Home Screen. For more information about iBooks, see Chapter 29, iBooks, on page 128. Chapter 2 Getting Started 19 Draft APPLE CONFIDENTIAL Basics 3 Use apps All the apps that come with iPhoneas well as the apps you download from the App Storeare on the Home screen. Start at home Tap an app to open it. Press the Home button to return to the Home screen. Swipe left or right to see other screens. Multitasking iPhone helps you manage several tasks at the same time. 20 Draft APPLE CONFIDENTIAL View contacts and open apps. Double-click the Home button to reveal the multitasking screen. Swipe left or right to see more. To switch to another app, tap it. To contact a recent or favorite contact, tap the contacts picture or name, then tap your preferred method of communication. Close an app. If an app isnt working properly, you can force it to quit. Drag the app up from the multitasking display. Then try opening the app again. If you have lots of apps, you can use Spotlight to find and open them. Pull down the center of the Home screen to see the search field. See Search on page 28. Look around Drag a list up or down to see more. Swipe to scroll quickly; touch the screen to stop it. Some lists have an indextap a letter to jump ahead. Drag a photo, map, or webpage in any direction to see more. To quickly jump to the top of a page, tap the status bar at the top of the screen. Get a closer look Stretch a photo, webpage, or map for a close-upthen pinch to zoom back out. In Photos, keep pinching to see the collection or album the photos in. Or double-tap a photo or webpage to zoom in, and double-tap again to zoom out. In Maps, double-tap to zoom in and tap once with two fingers to zoom out. Chapter 3 Basics 21 Draft APPLE CONFIDENTIAL Change the screen orientation Many apps give you a different view when you rotate iPhone. To lock the screen in portrait orientation, swipe up from the bottom edge of the screen to open Control Center, then tap

. The Portrait orientation lock icon is locked. appears in the status bar when the screen orientation Apps with sharing options, custom actions, and embedded features More apps now have additional sharing options, action options, or they are able to add features to other apps you already have. For example, if you download Facebook to iPhone, Facebook becomes a sharing option. Other apps might add filters or editing tools to the Photos app. To add these apps with additional options, download them from the App Store. Open the app with the information you want to use, then tap to access sharing or action options. For more information about sharing, see Share from apps on page 31. To use apps that add additional features to other apps (like Photos), open the new app youve downloaded. You can choose to to give your new app access to the Photos app, if you want to use its features. Continuity Using continuity features Continuity features connect your iPhone with your iPad, iPod touch, and Mac so they can work together as one. You can start an email or document on iPhone, then pick up where you left off on your iPad. Or let your iPad or Mac use your phone to make phone calls or send SMS or MMS text messages. Continuity features work with devices that are using iOS 8 or OS X Yosemite, and that are signed into iCloud using your Apple ID. You can use Continuity features with the iPhone 5 or later, iPad

(3rd generation or later), or iPod touch. Handoff Pick up on one device where you left off on another. You can use Handoff with Mail, Safari, Pages, Numbers, Keynote, Maps, Messages, Reminders, Calendar, Contacts, and even some third party apps. For Handoff to work, your devices must be signed into iCloud using the same Apple ID, and they must be within Bluetooth range of one another (about 10 meters or 30 feet). Switch devices. Swipe up from the bottom-left edge of the lock screen (where you see the apps activity icon), or go to the multitasking screen, then tap the app. On your Mac, click the app you were using. Disable Handoff. Go to Settings > General > Handoff & Suggested Apps. Phone calls Make and receive phone calls on your iPad, iPod touch, or Mac as long as your iPhone (with iOS 8) is nearby, on the same Wi-Fi network, and signed into iCloud using the same Apple ID. To make phone calls on one of your other devices, tap or click a phone number in Contacts, Calendar, or Safari. Chapter 3 Basics 22 Draft APPLE CONFIDENTIAL Messages Switch between your iOS devices or Mac as you send and receive SMS and MMS text messages. Just sign into iMessage with the same Apple ID as your iPhone. For more information, see SMS, MMS, and iMessage on page 71. Instant Hotspot If you have an iOS device or Mac that is out of Wi-Fi range, you can use the Personal Hotspot on your iPhone for internet access. Make sure that you are signed into iCloud using the same Apple ID for all your devices, then go to Settings > Personal Hotspot in your phone. In your Wi-Fi settings for your iPad, Mac, or iPod touch, select your phones name. When youre not using using your phones network, your devices disconnect to save battery life. For more information about setting up Personal Hotspot see Personal Hotspot on page 34. Customize iPhone Arrange your apps Arrange apps. Touch and hold any app on the Home screen until it jiggles, then drag apps around. Drag an app to the edge of the screen to move it to a different Home screen, or to the Dock at the bottom of the screen. Press the Home button to save your arrangement. Create a new Home screen. While arranging apps, drag an app to the right edge of the last Home screen. The dots above the Dock show how many Home screens you have, and which one youre viewing. You can also customize the Home screen using iTunes, when iPhone is connected to your computer. In iTunes, select iPhone, then click Apps. Start over. Go to Settings > General > Reset, then tap Reset Home Screen Layout to return the Home screen and apps to their original layout. Folders are removed and the original wallpaper is restored. Organize with folders Chapter 3 Basics 23 Draft APPLE CONFIDENTIAL Create a folder. While arranging apps, drag one app onto another. Tap the name of the folder to rename it. Drag apps to add or remove them. Press the Home button when you finish. You can have multiple pages of apps in a folder. Delete a folder. Drag out all the appsthe folder deletes automatically. Change the wallpaper Wallpaper settings let you set an image or photo as wallpaper for the Lock screen or Home screen. You can choose from dynamic and still images. Change the wallpaper. Go to Settings > Wallpaper & Brightness > Choose a New Wallpaper. When choosing an image for new wallpaper, the Perspective Zoom button determines whether your selected wallpaper is zoomed. For wallpaper you already set, go to the Wallpaper &

Brightness setting and tap the image of the Lock screen or Home screen to see the Perspective Zoom button. Note: The Perspective Zoom button doesnt appear if Reduce Motion (in Accessibility settings) is turned on. See Reduce screen motion on page 155. Adjust the screen brightness Dim the screen to extend battery life, or use Auto-Brightness. Adjust the screen brightness. Go to Settings > Wallpaper & Brightness, then drag the slider. If Auto-Brightness is on, iPhone adjusts the screen brightness for current light conditions using the built-in ambient light sensor. You can also adjust the brightness in Control Center. Type text The onscreen keyboard lets you enter text when needed. Enter text Tap a text field to see the onscreen keyboard, then tap letters to type. If you touch the wrong key, you can slide your finger to the correct key. The letter isnt entered until you release your finger from the key. Chapter 3 Basics 24 Draft APPLE CONFIDENTIAL

. If you havent added any keyboards, tap Tap Shift to type uppercase, or touch the Shift key and slide to a letter. Double-tap Shift for caps lock. To enter numbers, punctuation, or symbols, tap the Number key or the Symbol key to switch to the emoji keyboard. If you have to switch to the last one you used. Continue tapping to access other

, then slide to choose a different keyboard. To quickly several keyboards, tap enabled keyboards, or touch and hold end a sentence with a period and a space, just double-tap the space bar. To type an alternate character, touch and hold a key, then slide to choose one of the options. If you see a word underlined in red, tap it to see suggested corrections. If the word you want doesnt appear, type the correction. As you write, QuickType suggests up to three words and highlights the word it anticipates will be your next word. Accept a highlighted suggestion by entering a space or punctuation. Reject a suggestion by tapping the word youve typed (shown as a QuickType option with quotation

, then marks) rather than the highlighted word. To turn off QuickType, touch and hold slide to choose Predictive: Off. or If you have Predictive Text turned off, iPhone may still correct misspellings and anticipate what youre typing. Accept a suggestion by entering a space or punctuation, or by tapping return. To reject a suggestion, tap the x. If you reject the same suggestion a few times, iPhone stops suggesting it. QuickType suggestions To set options for typing, go to Settings > General > Keyboard. You can also use an Apple Wireless Keyboard to enter text. See Use an Apple Wireless Keyboard on page 26. To dictate instead of typing, see Dictate on page 27. Edit text Revise text. Touch and hold the text to show the magnifying glass, then drag to position the insertion point. Chapter 3 Basics 25 To type an alternate character, touch and hold a key, then slide to choose one of the options.QuickType suggestionsDraft APPLE CONFIDENTIAL Select text. Tap the insertion point to display the selection options. Or double-tap a word to select it. Drag the grab points to select more or less text. In read-only documents, such as webpages, touch and hold to select a word. You can cut, copy, or paste over selected text. With some apps, you can also get bold, italic, or underlined text (tap B/I/U); get the definition of a word; or have iPhone suggest an alternative. Tap Undo the last edit. Shake iPhone, then tap Undo. to see all the options. Save keystrokes A shortcut lets you enter a word or phrase by typing just a few characters. For example, type omw to enter On my way! That ones already set up for you, but you can also add your own. Create a shortcut. Go to Settings > General > Keyboard, then tap Shortcuts. Have a word or phrase you use and dont want it corrected? Create a shortcut, but leave the Shortcut field blank. Use iCloud to keep your personal dictionary up to date on your other devices. Go to Settings >

iCloud, then turn on Documents & Data or iCloud Drive. Use an Apple Wireless Keyboard You can use an Apple Wireless Keyboard (available separately) to enter text on your iPhone. The keyboard connects via Bluetooth, so you must first pair it with iPhone. Pair an Apple Wireless Keyboard with iPhone. Turn on the keyboard, go to Settings > Bluetooth and turn on Bluetooth, then tap the keyboard when it appears in the Devices list. Once its paired, the keyboard reconnects to iPhone whenever its in rangeup to about 30 feet

(10 meters). When its connected, the onscreen keyboard doesnt appear. Save your batteries. Turn off Bluetooth and the wireless keyboard when not in use. You can turn off Bluetooth in Control Center. To turn off the keyboard, hold down the On/off switch until the green light goes off. Unpair a wireless keyboard. Go to Settings > Bluetooth, tap tap Forget this Device. next to the keyboard name, then See Bluetooth devices on page 36. Add or change keyboards You can turn typing features, such as spell checking, on or off; add keyboards for writing in different languages; and change the layout of your onscreen keyboard or Apple Wireless Keyboard. Set typing features. Go to Settings > General > Keyboard. Add a keyboard for another language. Go to Settings > General > Keyboard > Keyboards > Add New Keyboard. Chapter 3 Basics 26 Draft APPLE CONFIDENTIAL Switch keyboards. If youve set up keyboards for other languages in Settings > General >

Keyboards, you can switch among them by tapping

. For information about international keyboards, see Use international keyboards on page 165. Change the keyboard layout. Go to Settings > General > Keyboard > Keyboards, select a keyboard, then choose a layout. Dictate On iPhone 4s or later, you can dictate instead of typing. Make sure Siri is turned on (in Settings >

General > Siri) and iPhone is connected to the Internet. Note: Cellular data charges may apply. See Cellular settings on page 176. Dictate text. Tap in the onscreen keyboard, then speak. Tap Done when you finish. Tap to begin dictation. Add text. Tap first. You can also replace selected text by dictating. again and continuing dictating. To insert text, tap to place the insertion point You can also start dictation by bringing iPhone to your ear, then moving iPhone back down in front of you when youre done. To turn on this feature, go to Settings > General > Siri. Add punctuation or format text. Say the punctuation or format. For example, Dear Mary comma the check is in the mail exclamation mark becomes Dear Mary, the check is in the mail!

Punctuation and formatting commands include:

quote end quote new paragraph new line capto capitalize the next word caps on caps offto capitalize the first character of each word all capsto make the next word all uppercase all caps on all caps offto make the enclosed words all uppercase no caps on no caps offto make the enclosed words all lowercase no space on no space offto run a series of words together smileyto insert :-) frownyto insert :-(

winkyto insert ;-) Chapter 3 Basics 27 Tap to begin dictation.Draft APPLE CONFIDENTIAL Voice Control Make phone calls and control music playback with Voice Control. (On iPhone 4s or later, you can also use Siri to control iPhone by voice. See Chapter 4, Siri, on page 43.) Note: Voice Control and Voice Control settings arent available when Siri is turned on. Use Voice Control. Turn Siri off in Settings > General > Siri, then press and hold the Home button until the Voice Control screen appears and you hear a beep, or press and hold the center button on your headset. See Use an Apple headset on page 36. For best results:

Speak clearly and naturally. Say only Voice Control commands, names, and numbers. Pause slightly between commands. Use full names. Change the language for Voice Control. By default, Voice Control expects you to speak voice commands in the language thats set for iPhone (in Settings > General > International >

Language). To use Voice Control in another language or dialect, go to Settings > General >

International > Voice Control. Voice Control for the Music app is always on, but you can keep Voice Control from dialing when iPhone is locked. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings > Passcode (other models), then turn off Voice Dial. For specific commands, see Make a call on page 46 and Siri and Voice Control on page 69. For more about using Voice Control, including information about using Voice Control in different languages, see support.apple.com/kb/HT3597. Search Many apps include a search field where you can type to find something that the app knows about. In addition to searching your iPhone, Spotlight Search shows suggestions from the Internet, App Store, Safari, iBook Store, and iTunes Store. These suggestions include movie showtimes, nearby places, news, and more. Search iPhone. Drag down the middle of any Home screen to reveal the search field. Results occur as you type; to hide the keyboard and see more results on the screen, tap Search. Tap an item in the list to open it. Chapter 3 Basics 28 Draft APPLE CONFIDENTIAL You can also use Spotlight Search to find and open apps. Choose which apps and content are searched. Go to Settings > General > Spotlight Search, then tap to deselect apps or content. Change the search order by touching and dragging a new position. Limit Spotlight Search to your iPhone. Go to Settings > General > Spotlight Search, then tap Spotlight Suggestions to deselect it. Turn off Location Services for Spotlight Suggestions. Go to Settings > Privacy > Location Services. Tap System Services, then turn off Spotlight Suggestions. to Control Center Control Center gives you instant access to the camera, calculator, AirPlay, and other handy features. You can also adjust the brightness, lock the screen in portrait orientation, turn wireless services on or off, and turn on AirDrop. See AirDrop on page 32. Open Control Center. Swipe up from the bottom edge of any screen (even the Lock screen). Open the currently playing audio app. Tap the song title. Close Control Center. Swipe down, tap the top of the screen, or press the Home button. Turn off access to Control Center in apps or on the Lock screen. Go to Settings > Control Center. Alerts and Notification Center Alerts Alerts let you know about important events. They can appear briefly at the top of the screen, or remain in the center of the screen until you acknowledge them. Chapter 3 Basics 29 Draft APPLE CONFIDENTIAL Some apps may include a badge on their Home screen icon, to let you know how many new items awaitfor example, the number of new email messages. If theres a problemsuch as a message that couldnt be sentan exclamation mark appears on the badge. On a folder, a numbered badge indicates the total number of notifications for all the apps inside. Alerts can also appear on the Lock screen. Respond to an alert without leaving your current app. Pull down on the alert when it appears at the top of your screen. Note: This feature works with text, email messages, calendar invitations, and more. Respond to an alert when iPhone is locked. Swipe the alert from left to right. Silence your alerts. Go to Settings > Do Not Disturb. Set sounds and vibrations. Go to Settings > Sounds. Notification Center Notification Center collects your notifications in one place, so you can review them whenever youre ready. View details about your daysuch as the weather forecast, appointments, birthdays, stock quotes, and even a quick summary of whats coming up tomorrow. Tap the Notifications tab to review all your alerts. Open Notification Center. Swipe down from the top edge of the screen. Set Today options. To choose what information appears, tap the Edit key at the end of your information on the Today tab. Tap + or - key to add or remove information. To arrange the order of your information, touch Set notification options. Go to Settings > Notifications. Tap an app to set its notification options. For example, choose to view a notification from a Lock Screen. You can also tap Edit to arrange the order of app notifications. Touch

, then drag it to a new position. and drag it to a new position. Note: To include traffic conditions for your commute (iPhone 4s or later) in the Today tab, make sure Frequent Locations is turned on in Settings > Privacy > Location Services > System Services

> Frequent Locations. Get government alerts. In some areas, you can turn on alerts in the Government Alerts list. Go to Settings > Notifications. Chapter 3 Basics 30 Draft APPLE CONFIDENTIAL For example, in the United States, iPhone 4s or later can receive presidential alerts and you can turn AMBER and Emergency Alerts (which includes both Severe and Extreme Imminent Threat alerts) on or off (theyre on by default). In Japan, iPhone can receive Emergency Earthquake Alerts from the Japan Meteorological Agency. Government alerts vary by carrier and iPhone model, and may not work under all conditions. Choose whether to show Today and Notifications View on a locked screen.Go to Settings >

Touch ID & Passcode (iPad models with Touch ID) or Settings > Passcode (other models) and choose whether to allow access when locked. Close Notification Center. Swipe up, or press the Home button. Sounds and silence You can change or turn off the sounds iPhone plays when you get a call, text, voicemail, email, tweet, Facebook post, reminder, or other event. Set sound options. Go to Settings > Sounds for options such as ringtones and alert tones, vibration settings and patterns, and ringer and alert volumes. Set vibration patterns. Go to Settings > Sounds and choose an item from the Sounds and Vibration Patterns list. Tap Vibration to select a pattern or create your own. If you want to temporarily silence incoming calls, alerts, and sound effects, see the following section and Ring/Silent switch on page 11. Do Not Disturb Do Not Disturb is an easy way to silence iPhone, whether youre going to dinner or to sleep. It keeps calls and alerts from making any sounds or lighting up the screen. Turn on Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap

. When Do Not Disturb is on, appears in the status bar. Note: Alarms still sound, even when Do Not Disturb is on. To make sure iPhone stays silent, turn it off. Configure Do Not Disturb. Go to Settings > Do Not Disturb. You can schedule quiet hours, allow calls from your Favorites or groups of contacts, and allow repeated calls to ring through for those emergency situations. You can also set whether Do Not Disturb silences iPhone only when its locked, or even when its unlocked. Sharing Share from apps In many apps, you can tap Share or to share your information in different ways. The choices vary depending on the app youre using. Additional options may appear if youve downloaded third-party apps with sharing extensions (such as Pinterest or Flickr). Use Twitter, Facebook, Flickr, Pinterest, Vimeo or other third-party apps. Sign in to your account in Settings. The Twitter, Facebook, Flickr, Pinterest, and Vimeo sharing buttons take you to the appropriate setting if youre not yet signed in. Note: While youre composing a tweet, the number in the lower-right corner shows the number of characters remaining. Attachments use some of a tweets 140 characters. Chapter 3 Basics 31 Draft APPLE CONFIDENTIAL Customize the different ways you choose to share your information. Tap the More button, then touch and drag items to new positions. Tap to share with a nearby friend using AirDrop. AirDrop AirDrop lets you share your photos, videos, websites, locations, and other items wirelessly with other nearby devices (iOS 7 or later). With iOS 8 you can share with Mac computers that have OS X Yosemite installed. AirDrop transfers information using Wi-Fi and Bluetooth. To use AirDrop, you need to be signed into iCloud using your Apple ID, and must be on the same Wi-Fi network, or within approximately 30 feet (10 meters) of the other device. Transfers are encrypted for security. Share an item using AirDrop. Tap Share

, tap AirDrop, then tap the name of a nearby AirDrop user. AirDrop is also available in Control Centerjust swipe up from the bottom edge of the screen to open Control Center. Receive AirDrop items from others. Swipe up from the bottom edge of the screen to open Control Center. Tap AirDrop, then choose to receive items from Contacts Only or from Everyone. You can accept or decline each request as it arrives. Family Sharing With Family Sharing, up to six family members can share their iTunes, iBooks, and App Store purchases, a family calendar, family photos, and more. One adult in your householdthe family organizerinvites family members to join the family group and agrees to pay for any iTunes, iBooks, and App Store purchases those family members initiate while part of the Family. Children under 13 can participate in Family Sharing too. As a parent or legal guardian, the family organizer can provide verified parental consent for a child to have their own Apple ID, and create it on the childs behalf. Once the account is created, it will be added to the Family automatically. Family Sharing requires iCloud and is available on devices with iOS 8, Mac computers with OS X Yosemite, and iCloud for Windows 4.0. You can be part of one family group at a time, and may switch families twice per year. Set up Family Sharing. Go to Settings > iCloud > Set Up Family Sharing. Follow the onscreen instructions to set up a shared payment method and invite family members to join. Create an Apple ID for a child. Tap Settings > iCloud > Family, then scroll to the bottom of the screen and tap Create an Apple ID for a child. Chapter 3 Basics 32 Tap to share with a nearby friend using AirDrop.Draft APPLE CONFIDENTIAL Accept an invitation to Family Sharing. Accept a Family Sharing invitation from any compatible iOS device or Mac where you are signed into iCloud. Or, if the organizer is nearby, they can simply ask you to enter your iCloud Apple ID and password during the setup process. Access shared iTunes, iBooks, and App Store purchases. Open iTunes Store, iBooks, or App Store, tap Purchased, then choose a family member from the menu that appears. When a family member makes a purchase, it is billed directly to the family organizers account. Once purchased, the item is added to the initiating family members account and is shared with the rest of the family. If Family Sharing is ever disabled, each person will keep the items they chose to purchaseeven if they were paid for by the family organizer. Turn on Ask to Buy. The family organizer can require members under the age of 18 to request approval for purchases or free downloads. Go to Settings < iCloud < Family, then tap the persons name. Note: Ask to Buy is enabled by default for children under 13. Hide your iTunes, iBooks, and App Store purchases. Open iTunes on your computer, then click iTunes Store. Under Quick Links, click Purchased, then choose the content type (for example, Music or Movies). Hover over the item you want to hide, then click

. (WILL GET NEW GRAPHIC) To make purchases visible again, return to Quick Links, then click Account. Scroll down to iTunes in the Cloud, then click Manage (to the right of Hidden Purchases. After joining Family Sharing, a shared family album (Photos), calendar (Calendar), and reminders list (Reminders) appears in family members respective apps. For more information about shared albums, see iCloud Photo Library on page 79. For more information about shared calendars, see Share iCloud calendars on page 77. Find your family. Family members can share their location by tapping Settings > iCloud > Share My Location. To find a family members location, use the Find My Friends app, or the Messages app on iOS 8. For more information about sharing or viewing locations using Messages, see Share photos, videos, your location, and more on page 73. Keep track of your familys devices. To let family members track your devices go to Settings >

iCloud > Family, then tap your name. Go to Settings > iCloud > Share My Location so you can also see your device on a map. To help someone find their device, open the Find My iPhone app. If you leave Family Sharing, your account is removed from the family group and you immediately stop sharing music, movies, TV shows, books, and apps with any remaining family members. In addition, family photos, calendar, and reminders will be removed from your devices. Chapter 3 Basics 33 Draft APPLE CONFIDENTIAL Any DRM-protected music, movies, TV shows, books, or apps you previously downloaded from other family members collections will no longer be usable, and other family members will no longer be able to use content downloaded from your collection. If you have made In-App Purchases from an app originally purchased by someone else, you will need to purchase the app yourself to regain access to your In-App Purchases. iCloud Drive iCloud Drive stores your documents in iCloud so you can always access the latest version from your iPhone, iPad, iPod touch, Mac, or PC. It also allows your apps to share files so you can work on the same file across multiple apps. iCloud Drive is available(NEED KB ARTICLE FOR REFERENCE) Set up iCloud Drive. Go to Settings > iCloud > iCloud Drive, then follow the instructions onscreen. For more information about iCloud Drive Access and move documents or create folders in iCloud Drive. Open an app that creates and manages documents. (For example, Pages, Numbers, Keynote or a third-party app). Choose to view or open documents and then tap iCloud from the menu. Transfer files There are several ways to transfer files between iPhone and your computer or other iOS device. Transfer files using iTunes. Connect iPhone to your computer using the included cable. In iTunes on your computer, select iPhone, then click Apps. Use the File Sharing section to transfer documents between iPhone and your computer. Apps that support file sharing appear in the File Sharing Apps list in iTunes. To delete a file, select it in the Documents list, then press the Delete key. You can also view files received as email attachments on iPhone. With some apps, you can transfer files using AirDrop. See AirDrop on page 32. Personal Hotspot Use Personal Hotspot to share your iPhone Internet connection. Computers can share your Internet connection using Wi-Fi, Bluetooth, or a USB cable. Other iOS devices can share the connection using Wi-Fi. Personal Hotspot works only if iPhone is connected to the Internet over the cellular data network. Note: This feature may not be available with all carriers. Additional fees may apply. Contact your carrier for more information. Chapter 3 Basics 34 Draft APPLE CONFIDENTIAL Share an Internet connection. Go to Settings > Cellular, then tap Personal Hotspotif it appearsto set up the service with your carrier. After you turn on Personal Hotspot, other devices can connect in the following ways:

Wi-Fi: On the device, choose your iPhone from the list of available Wi-Fi networks. USB: Connect your iPhone to your computer using the cable that came with it. In your computers Network preferences, choose iPhone and configure the network settings. Bluetooth: On iPhone, go to Settings > Bluetooth and turn on Bluetooth. To pair and connect iPhone with your device, refer to the documentation that came with your computer. appears in the status bar of iOS devices using Personal Hotspot. Note: When a device is connected, a blue band appears at the top of the iPhone screen. The Personal Hotspot icon Change the Wi-Fi password for iPhone. Go to Settings > Personal Hotspot > Wi-Fi Password, then enter a password of at least 8 characters. Monitor your cellular data network usage. Go to Settings > Cellular. See Cellular settings on page 176. AirPlay Use AirPlay to stream music, photos, and video wirelessly to Apple TV and other AirPlay-enabled devices on the same Wi-Fi network as iPhone. Display the AirPlay controls. Swipe up from the bottom edge of the screen to open Control Center, then tap

. Stream content. Tap Switch back to iPhone. Tap Mirror the iPhone screen on a TV. Tap appears at the top of the iPhone screen when AirPlay mirroring is turned on.

, choose an Apple TV, then tap Mirroring. A blue bar

, then choose the device you want to stream to.

, then choose iPhone. You can also connect iPhone to a TV, projector, or other external display using the appropriate Apple cable or adapter. See support.apple.com/kb/HT4108. AirPrint Use AirPrint to print wirelessly to an AirPrint-enabled printer, from apps such as Mail, Photos, and Safari. Many apps available on the App Store also support AirPrint. iPhone and the printer must be on the same Wi-Fi network. For more information about AirPrint, see support.apple.com/kb/HT4356. Print a document. Tap See the status of a print job. Double-click the Home button, then tap Print Center. The badge on the icon shows how many documents are in the queue. Cancel a job. Select it in the Print Center, then tap Cancel Printing.

(depending on the app youre using). or Chapter 3 Basics 35 Draft APPLE CONFIDENTIAL Use an Apple headset The Apple EarPods with Remote and Mic (iPhone 5 or later) and the Apple Earphones with Remote and Mic (iPhone 4s) feature a microphone, volume buttons, and the center button, which lets you answer and end calls or control audio and video playback, even when iPhone is locked. Center button Use the center button to control music playback. Pause a song or video: Press the center button. Press again to resume playback. Skip to the next song: Press the center button twice quickly. Return to the previous song: Press the center button three times quickly. Fast-forward: Press the center button twice quickly and hold. Rewind: Press the center button three times quickly and hold. Use the center button to answer or make phone calls. Answer an incoming call: Press the center button. End the current call: Press the center button. Decline an incoming call: Press and hold the center button for about two seconds, then let go. Two low beeps confirm you declined the call. Switch to an incoming or on-hold call, and put the current call on hold: Press the center button. Press again to switch back to the first call. Switch to an incoming or on-hold call, and end the current call: Press and hold the center button for about two seconds, then let go. Two low beeps confirm you ended the first call. Use Siri or Voice Control. Press and hold the center button. See Chapter 4, Siri, on page 43 or Voice Control on page 28. Bluetooth devices You can use Bluetooth devices with iPhone, including headsets, car kits, stereo headphones, or an Apple Wireless Keyboard. For supported Bluetooth profiles, see support.apple.com/kb/HT3647. WARNING: For important information about avoiding hearing loss and avoiding distraction while driving, see Important safety information on page 170. Note: The use of certain accessories with iPhone may affect wireless performance. Not all iPod and iPad accessories are fully compatible with iPhone. Turning on airplane mode may eliminate audio interference between iPhone and an accessory. Reorienting or relocating iPhone and the connected accessory may improve wireless performance. Turn Bluetooth on. Go to Settings > Bluetooth. Chapter 3 Basics 36 Center buttonDraft APPLE CONFIDENTIAL Connect to a Bluetooth device. Tap the device in the Devices list, then follow the onscreen instructions to connect to it. See the documentation that came with the device for information about Bluetooth pairing. For information about using an Apple Wireless Keyboard, see Use an Apple Wireless Keyboard on page 26. iPhone must be within about 30 feet (10 meters) of the Bluetooth device. Return audio output to iPhone. Turn off or unpair the device, turn off Bluetooth in Settings >

Bluetooth, or use AirPlay to switch audio output to iPhone. See AirPlay on page 35. Audio output returns to iPhone whenever the Bluetooth device is out of range. Bypass your Bluetooth device. To use the iPhone receiver or speaker for phone calls:

Answer a call by tapping the iPhone screen. During a call, tap Audio and choose iPhone or Speaker Phone. Turn off the Bluetooth device, unpair it, or move out of range. Turn off Bluetooth in Settings > Bluetooth. Unpair a device. In Settings > Bluetooth, tap If you dont see the Devices list, make sure Bluetooth is on. next to the device, then tap Forget this Device. Restrictions You can set restrictions for some apps, and for purchased content. For example, parents can restrict explicit music from appearing in playlists, or disallow changes to certain settings. Use restrictions to prevent the use of certain apps, the installation of new apps, or changes to accounts or the volume limit. Turn on restrictions. Go to Settings > General > Restrictions, then tap Enable Restrictions. Youll be asked to define a restrictions passcode thats necessary in order to change the settings you make. This can be different than the passcode for unlocking iPhone. Important: If you forget your restrictions passcode, you must restore the iPhone software. See Restore iPhone on page 176. Privacy Privacy settings let you see and control which apps and system services have access to Location Services, and to contacts, calendars, reminders, and photos. Location Services lets location-based apps such as Reminders, Maps, and Camera gather and use data indicating your location. Your approximate location is determined using available information from cellular network data, local Wi-Fi networks (if you have Wi-Fi turned on), and GPS (may not be available in all areas). The location data collected by Apple isnt collected in a form that personally identifies you. When an app is using Location Services, appears in the menu bar. Turn Location Services on or off. Go to Settings > Privacy > Location Services. You can turn it off for some or for all apps and services. If you turn off Location Services, youre prompted to turn it on again the next time an app or service tries to use it. Turn Location Services off for system services. Several system services, such as compass calibration and location-based iAds, use Location Services. To see their status, turn them on or off, or show Location Services > System Services. in the menu bar when these services use your location, go to Settings > Privacy >

Chapter 3 Basics 37 Draft APPLE CONFIDENTIAL Turn off access to private information. Go to Settings > Privacy. You can see which apps and features have requested and been granted access to the following information:

Contacts Calendar Reminders Photos Bluetooth Sharing Microphone Camera Home Data Motion Activity Twitter Facebook You can turn off each apps access to each category of information. Review the terms and privacy policy for each third-party app to understand how it uses the data its requesting. Security Security features help protect the information on your iPhone from being accessed by others. Use a passcode with data protection For better security, you can set a passcode that must be entered each time you turn on or wake up iPhone. Set a passcode. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings

> Passcode (other models), then set a 4-digit passcode. Setting a passcode turns on data protection, using your passcode as a key to encrypt Mail messages and attachments stored on iPhone, using 256-bit AES encryption. (Other apps may also use data protection.) Increase security. Turn off Simple Passcode and use a longer passcode. To enter a passcode thats a combination of numbers and letters, you use the keyboard. If you prefer to unlock iPhone using the numeric keypad, create a passcode using numbers only. Add fingerprints and set options for the Touch ID sensor. (iPhone models with Touch ID) Go to Settings > Touch ID & Passcode. See Touch ID sensor, below. Allow access to features when iPhone is locked. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings > Passcode (other models). Optional features include:

Voice Dial Today Notifications View Siri (if enabled, see Siri settings on page 44) Passbook (see Chapter 21, Passbook, on page 108) Stockholm (N56/N61) Reply with Message (see When someone calls on page 47) Chapter 3 Basics 38 Draft APPLE CONFIDENTIAL Allow access to Control Center when iPhone is locked. Go to Settings > Control Center. See Control Center on page 29. Erase data after ten failed passcode attempts. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings > Passcode (other models), then tap Erase Data. After ten failed passcode attempts, all settings are reset, and all your information and media are erased by removing the encryption key to the data. If you forget your passcode, you must restore the iPhone software. See Restore iPhone on page 176. Touch ID sensor On iPhone models with Touch ID, you can use a fingerprint instead of your passcode or Apple ID password to unlock iPhone or make purchases in the iTunes Store, App Store, iBooks Store, or other third-party apps that use Stockholm. Set up the Touch ID sensor. Go to Settings > Touch ID & Passcode. Set whether you want to use a fingerprint to unlock iPhone, and to make app purchases. Tap Add a Fingerprint and follow the onscreen instructions. You can add more than one fingerprint (your thumb and forefinger, for example, or one for your spouse). Delete a fingerprint. Tap the fingerprint, then tap Delete Fingerprint. If you have more than one fingerprint, touch the Home button to find out which fingerprint it is. Name a fingerprint. Tap the fingerprint, then enter a name, such as Thumb. Use the Touch ID sensor to unlock iPhone. Touch the Home button with a finger youve added in Settings. You can unlock iPhone from either the Lock screen or the Passcode screen. Use the Touch ID sensor to make a purchase in an app. When purchasing from the iTunes Store, App Store, or iBooks Store, follow the prompts to enable purchases with your fingerprint. Or go to Settings > Touch ID & Passcode and turn on iTunes & App Store. If you want to make a purchase in an external app, see Stockholm on page 109. Use the Touch ID sensor to make a purchase at the store. (n56,N61) You can use Stockholm to make purchases in stores accepting contactless payments. For more information see Stockholm on page 109. Note: If you turn iPhone off, youll be asked to confirm your passcode when you turn iPhone back on and unlock it the first time, and youll be asked for your Apple ID password for the first purchase you make. iCloud Keychain iCloud Keychain keeps your Safari website user names and passwords, credit card information, and Wi-Fi network information up to date. iCloud Keychain works on all your approved devices

(iOS 7 or later) and Mac computers (OS X Mavericks or later). iCloud Keychain works with Safari Password Generator and AutoFill. When youre setting up a new account, Safari Password Generator suggests unique, hard-to-guess passwords. You can use AutoFill to have iPhone enter your user name and password info, making login easy. See Fill in forms on page 61. Note: Some websites do not support AutoFill. iCloud Keychain is secured with 256-bit AES encryption during storage and transmission, and cannot be read by Apple. Chapter 3 Basics 39 Draft APPLE CONFIDENTIAL Set up iCloud Keychain. Go to Settings > iCloud > Keychain. Turn on iCloud Keychain and follow the onscreen instructions. If youve set up iCloud Keychain on other devices, you need to approve use of iCloud Keychain from one of those devices, or use your iCloud Security Code. Important: If you forget your iCloud Security Code, youll have to start over and set up your iCloud Keychain again. Set up AutoFill. Go to Settings > Safari > Passwords & AutoFill. Make sure Names and Passwords, and Credit Cards, are turned on (theyre on by default). To add credit card info, tap Saved Credit Cards. The security code for your credit card is not savedyou have to enter that manually. To automatically fill in names, passwords, or credit card info on sites that support it, tap a text field, then tap AutoFill. To protect your personal information, set a passcode if you turn on iCloud Keychain and AutoFill. Limit Ad Tracking Restrict or reset Ad Tracking. Go to Settings > Privacy > Advertising. Turn on Limit Ad Tracking to prevent apps from accessing your iPhone advertising identifier. For more information, tap About Advertising & Privacy. Find My iPhone Find My iPhone can help you locate and secure your iPhone using the free Find My iPhone app

(available in the App Store) on another iPhone, iPad, or iPod touch, or using a Mac or PC web browser signed in to www.icloud.com/find. Find My iPhone includes Activation Lock, which makes it more difficult for anyone else to use or sell your iPhone if you ever lose it. Your Apple ID and password are required in order to turn off Find My iPhone or to erase and reactivate your iPhone. Turn on Find My iPhone. Go to Settings > iCloud > Find My iPhone. Go to Settings > iCloud >

Share My Location so you can also see your device on a map. Important: To use Find My iPhone features, Find My iPhone must be turned on before your iPhone is lost. iPhone must be able to connect to the Internet for you to locate and secure the device. Use Find My iPhone. Open the Find My iPhone app on an iOS device, or go to www.icloud.com/find on your computer. Sign in and select your device. Play Sound: Play a sound for two minutes. Lost Mode: You can immediately lock your missing iPhone with a passcode and send it a message displaying a contact number. iPhone also tracks and reports its location, so you can see where its been when you check the Find My iPhone app. When you put your iPhone in Lost Mode, credit cards you set up in Passbook or Stockholm (iPhone 56/61) are automatically disabled. Erase iPhone: Protects your privacy by erasing all the information and media on your iPhone and restoring iPhone to its original factory settings. Note: Before selling or giving away your iPhone, you should erase it completely to remove all of your personal data and turn off Find My iPhone Activation Lock. Go to Settings > General > Reset

> Erase All Content and Settings. See Sell or give away iPhone? on page 177. Chapter 3 Basics 40 Draft APPLE CONFIDENTIAL Charge and monitor the battery iPhone has an internal, lithium-ion rechargeable battery. For more information about the batteryincluding tips for maximizing battery lifesee www.apple.com/batteries. WARNING: For important safety information about the battery and charging iPhone, see Important safety information on page 170. Charge the battery. Connect iPhone to a power outlet using the included cable and USB power adapter. Note: Connecting iPhone to a power outlet can start an iCloud backup or wireless iTunes syncing. See Back up iPhone on page 175 and Sync with iTunes on page 17. You can also charge the battery by connecting iPhone to your computer, which also allows you to sync iPhone with iTunes. See Sync with iTunes on page 17. Unless your keyboard has a high-

power USB 2.0 or 3.0 port, you must connect iPhone to a USB 2.0 or 3.0 port on your computer. Important: The iPhone battery may drain instead of charge, if iPhone is connected to a computer thats turned off or is in sleep or standby mode. See proportion of battery used by each app. Tap Settings > General > Usage, then tap Battery Usage. The battery icon in the upper-right corner shows the battery level or charging status. To display the percentage of battery charge remaining, go to Settings > General > Usage. When syncing or using iPhone, it may take longer to charge the battery. Important: If iPhone is very low on power, it may display an image of a nearly depleted battery, indicating that iPhone needs to charge for up to ten minutes before you can use it. If iPhone is extremely low on power, the display may be blank for up to two minutes before the low-battery image appears. Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. The iPhone battery isnt user replaceable; it can be replaced only by an Apple Authorized Service Provider. See www.apple.com/batteries/replacements.html. Travel with iPhone If you travel outside your carriers network area, you can avoid roaming charges by turning off voice and data roaming services in Settings > Cellular. See Cellular settings on page 176. Chapter 3 Basics 41 Draft APPLE CONFIDENTIAL Some airlines let you keep your iPhone turned on if you switch to Airplane Mode. You cant make calls or use Bluetooth, but you can listen to music, play games, watch videos, or use other apps that dont require network or phone connections. If the airline allows it, you can turn Wi-Fi or Bluetooth back on to enable those services, even while in Airplane Mode. Turn on Airplane Mode. Swipe up from the bottom edge of the screen to open Control Center, then tap

. You can also turn Airplane Mode on or off in Settings. When airplane mode is on, appears in the status bar at the top of the screen. Wi-Fi and Bluetooth can also be turned on or off in Control Center. Chapter 3 Basics 42 Draft APPLE CONFIDENTIAL Siri 4 Make requests Siri lets you speak to iPhone to send messages, schedule meeting, place phone calls, and much more. Siri understands natural speech, so you dont have to learn special commands or keywords. Ask Siri anything, from set the timer for 3 minutes to what movies are showing tonight? Open apps, and turn features like Airplane Mode, Bluetooth, Do Not Disturb, and Accessibility on or off. Siri is great for keeping you updated with the latest sports info, helping you decide on a restaurant, and searching the iTunes Store or App Store for purchases. Note: To use Siri, iPhone must be connected to the Internet. See Connect to the Internet on page 14. Cellular charges may apply. Summon Siri. Press and hold the Home button until Siri beeps, then make your request. Control when Siri listens. Instead of letting Siri notice when you stop talking, you can continue to hold down the Home button while you speak, and release it when you finish. Hands-free Siri. With iPhone connected to a power source, you can use Siri hands free. Instead of pressing the Home button, say "Hey Siri to get Siris attention, then make your request. To turn Voice Activation on or off, go to Settings > General > Siri. If youre using a headset, you can use the center or call button in place of the Home button. Siris response What Siri heard you say Often you can tap the screen for additional info or further action. Tap to speak to Siri. For hints, ask Siri what can you do, or tap

. Depending on your request, Siris onscreen response often includes information or images that you can tap for additional detail, or to perform some other action like search the web or open a related app. 43 What Siri heard you sayTap to speak to Siri.Siris responseOften you can tap the screen for additional info or further action.Draft APPLE CONFIDENTIAL Use Raise to Speak. Raise iPhone to your ear and speak after the beep. (If the screen isnt on, first press the Lock or Home button.) Raise to Speak must be turned on in Settings > General > Siri. Change the voice gender for Siri. Go to Settings > General > Siri (may not be available in all areas). Adjust the volume for Siri. Use the volume buttons while youre interacting with Siri. Tell Siri about yourself If you tell Siri about yourselfincluding things like your home and work addresses, and your relationshipsyou can get personalized service like, remind me when I get home to call my wife. Tell Siri who you are. Fill out your info card in Contacts, then go to Settings > General > Siri > My Info and tap your name. Note: Location-based reminders require that you have Location Services turned on. Location information isnt tracked or stored outside iPhone. If you dont want to use Location Services, go to Settings > Privacy > Location Services to turn it off. You can still use Siri, but Siri wont be able to do anything that requires knowing your location. Make corrections Want to cancel that last command? Say cancel, tap the Siri icon, or press the Home button. If Siri doesnt get something right, you can tap to edit your request. again and clarify your request. For example, if Siri heard "Whats a good place to eat in Or tap Austin, you can say, I meant Boston. Dont bother saying what you didnt mean. Siri settings To set options for Siri, go to Settings > General > Siri. Options include:

Turning Siri on or off Turning Voice Activation on or off Language Chapter 4 Siri 44 Draft APPLE CONFIDENTIAL Voice gender (may not be available in all areas) Voice feedback My Info card Raise to speak Prevent access to Siri when iPhone is locked. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings > Passcode (other models). You can also disable Siri by turning on restrictions. See Restrictions on page 37. Chapter 4 Siri 45 Draft APPLE CONFIDENTIAL Phone 5 Phone calls Make a call Making a call on iPhone is as simple as choosing a number in your contacts, or tapping one of your favorites or recent calls. Or just ask Siri to call Bob Jones. WARNING: For important information about avoiding distractions while on a call, see Important safety information on page 170.

. You can also add names to Favorites from Contacts. In Contacts, tap Add to Add favorites. With Favorites, you can make a call with a single tap. To add someone to your Favorites list, tap Favorites at the bottom of a card, and tap the number to add. Delete a name or rearrange your Favorites list. Tap Edit. Return a recent call. Tap Recents, then tap the call. Tap caller. A red badge indicates the number of missed calls. to get more info about the call, or the You can also reach recent and favorite people youve been in contact with from the multitasking screenjust double-click the Home button. Dial manually. Tap Keypad, enter the number, then tap Call. Paste a number to the keypad: Tap the screen above the keyboard, then tap Paste. Enter a soft (2-second) pause: Touch the * key until a comma appears. 46 Draft APPLE CONFIDENTIAL Enter a hard pause (to pause dialing until you tap the Dial button): Touch the # key until a semicolon appears. Redial the last number: Tap Keypad, tap Call to display the number, then tap Call again. Use Siri or Voice Control. Press and hold the Home button, say call or dial, then say the name or number. You can add at home, work, or mobile. See Chapter 4, Siri, on page 43 and Voice Control on page 28. For best results, speak the full name of the person youre calling. When voice dialing a number, speak each digit separatelyfor example, four one five, five five five. For the 800 area code in the U.S., you can say eight hundred. Call from your Mac or iPad. Tap or click a phone number in Contacts, Calendar, or Safari. The device must be connected to the same Wi-Fi network and signed into iCloud using the same Apple ID as your iPhone. Your iPad must be using iOS 8; your Mac must be using OS X Yosemite. The call is made via iPhone. Cellular charges may apply. When someone calls Tap Accept to answer an incoming call. Or if iPhone is locked, drag the slider. You can also press the center button on your headset. Silence a call. Press the Sleep/Wake button or either volume button. You can still answer the call after silencing it, until it goes to voicemail. Decline a call and send it directly to voicemail. Do one of the following:

Press the Sleep/Wake button twice quickly. Press and hold the center button on your headset for about two seconds. Two low beeps confirm that the call was declined. Tap Decline (if iPhone is awake when the call comes in). Note: In some areas, declined calls are disconnected without being sent to voicemail. Respond with a text message instead of answering. Tap Message and choose a reply or tap Custom. To create your own default replies, go to Settings > Phone > Respond with Text, then tap any of the default messages and replace it with your own text. Remind yourself to return the call. Tap Remind Me and indicate when you want to be reminded. Take a call on your Mac or iPad. Click or swipe the notification to answer, ignore, or respond with a quick message. The device must be connected to the same Wi-Fi network, and signed into iCloud using the same Apple ID, as your iPhone. Your iPad must be using iOS 8; your Mac must be using OS X Yosemite. Keep it quiet Want to go offline for a while? Swipe up from the bottom edge of the screen to open Control Center, then turn on Do Not Disturb or Airplane Mode. See Do Not Disturb on page 31 and Travel with iPhone on page 41. Chapter 5 Phone 47 Draft

 

 

APPLE CONFIDENTIAL Block unwanted callers. On a contact card, tap Block this Caller (you can see a callers contact card from Favorites or Recents by tapping

). You can also block callers in Settings > Phone >

Blocked. You will not receive voice calls, FaceTime calls, or text messages from blocked callers. For more information about blocking calls, see support.apple.com/kb/HT5845. While on a call When youre on a call, the screen shows several call options. Mute your line. Or touch and hold to put your call on hold. Make another call. Dial or enter a number. Use the speakerphone or a Bluetooth device. Get contact info. Make a FaceTime call. or press the Sleep/Wake button. End a call. Tap Use another app while on a call. Press the Home button, then open the app. To return to the call, tap the green bar at the top of the screen. Respond to a second call. You can:

Ignore the call and send it to voicemail: Tap Ignore. Put the first call on hold and answer the new one: Tap Hold + Accept. End the first call and answer the new one: When using a GSM network, tap End + Accept. With a CDMA network, tap End and when the second call rings back, tap Accept, or drag the slider if the phone is locked. With a call on hold, tap Swap to switch between calls or tap Merge Calls to talk with both parties at once. See Conference calls, below. Note: With CDMA, you cant switch between calls if the second call was outgoing, but you can merge the calls. You cant merge calls if the second call was incoming. If you end the second call or the merged call, both calls are terminated. Conference calls With GSM, you can set up a conference call with up to five people (depending on your carrier). Create a conference call. While on a call, tap Add Call, make another call, then tap Merge Calls. Repeat to add more people to the conference. Drop one person: Tap Talk privately with one person: Tap

, then tap Private next to the person. Tap Merge Calls to next to a person, then tap End. resume the conference. Add an incoming caller: Tap Hold Call + Answer, then tap Merge Calls. Chapter 5 Phone 48 Mute your line. Or touch and hold to put your call on hold.Dial or entera number.Use thespeakerphoneor a Bluetoothdevice.Get contact info.Make aFaceTime call.Make another call.Draft APPLE CONFIDENTIAL Emergency calls Make an emergency call when iPhone is locked. On the Enter Passcode screen, tap Emergency Call (to dial 911 in the U.S., for example). Important: You can use iPhone to make an emergency call in many locations, provided that cellular service is available, but you should not rely on it for emergencies. Some cellular networks may not accept an emergency call from iPhone if iPhone is not activated, if iPhone is not compatible with or configured to operate on a particular cellular network, or (when applicable) if iPhone does not have a SIM card or if the SIM card is PIN-locked. In the U.S., location information (if available) is provided to emergency service providers when you dial 911. With CDMA, when an emergency call ends, iPhone enters emergency call mode for a few minutes to allow a call back from emergency services. During this time, data transmission and text messages are blocked. Exit emergency call mode (CDMA). Do one of the following:

Tap the Back button. Press the Sleep/Wake button or the Home button. Use the keypad to dial a non-emergency number. Visual voicemail Visual voicemail lets you see a list of your messages and choose which one to listen to or delete, without having to wade through all of them. A badge on the Voicemail icon tells you how many unheard messages you have. The first time you tap Voicemail, youre prompted to create a voicemail password and record your voicemail greeting. Listen to a voicemail message. Tap Voicemail, then tap a message. To listen again, select the message and tap the voice prompts.

. If visual voicemail isnt available with your service, tap Voicemail and follow Unheard messages Contact info Play/pause Drag the playhead to skip to any point in a message. Return the call. Speakerphone

(Audio, when a Bluetooth device is connected. Tap to choose audio output.) Messages are saved until you delete them or your carrier erases them. Delete a message. Swipe or tap the message, then tap Delete. Chapter 5 Phone 49 Drag the playhead to skip to any point in a message.Unheard messagesPlay/pauseContact infoSpeakerphone(Audio, when a Bluetooth device is connected. Tap to choose audio output.)Return the call.Draft APPLE CONFIDENTIAL Note: In some areas, deleted messages may be permanently erased by your carrier. Manage deleted messages. Tap Deleted Messages (at the end of the messages list), then:

Listen to a deleted message: Tap the message. Undelete a message: Tap the message and tap Undelete. Delete messages permanently: Tap Clear All. Update your greeting. Tap Voicemail, tap Greeting, tap Custom, then tap Record. Or, to use your carriers generic greeting, tap Default. Set an alert sound for new voicemail. Go to Settings > Sounds. Change the password. Go to Settings > Phone > Change Voicemail Password. Contacts When viewing a contacts card, a quick tap lets you make a phone call, create an email message, find the contacts location, and more. See Chapter 30, Contacts, on page 132. Call forwarding, call waiting, and caller ID Set up call forwarding, call waiting, or caller ID. (GSM) Go to Settings > Phone. Call Forwarding: The Call Forwarding icon (

) appears in the status bar when call forwarding is on. You must be in range of the cellular network when you set iPhone to forward calls, or calls wont be forwarded. Call Waiting: If youre on a call and call waiting is turned off, incoming calls go directly to voicemail. Caller ID: For FaceTime calls, your phone number is displayed even if caller ID is turned off. For CDMA accounts, contact your carrier for information about enabling and using these features. See support.apple.com/kb/HT4515. Ringtones and vibrations iPhone comes with ringtones that sound for incoming calls, Clock alarms, and the Clock timer. You can also purchase ringtones from songs in the iTunes Store. See Chapter 22, iTunes Store, on page 111. Set the default ringtone. Go to Settings > Sound > Ringtone. Assign different ringtones for the special people in your life. Go to Contacts, choose a contact, tap edit, then tap Ringtone. Turn the ringer on or off. Flip the switch on the side of iPhone. Important: Clock alarms still sound when the Ring/Silent switch is set to silent. Turn vibrate on or off. Go to Settings > Sounds. See Sounds and silence on page 31. International calls For information about making international calls from your home area (including rates and other charges that may apply), contact your carrier. Chapter 5 Phone 50 Draft APPLE CONFIDENTIAL When traveling abroad, you may be able to use iPhone to make calls, send and receive text messages, get visual voicemail, and use apps that access the Internet, depending on available networks. Enable international roaming. To turn on Data Roaming and Voice Roaming (CDMA), go to Settings > Cellular. Contact your carrier for information about availability and fees. Important: Voice, text message, and data roaming charges may apply. To avoid charges while roaming, turn off Data Roaming and Voice Roaming (CDMA). You may be able to roam on GSM networks, if you have a CDMA account and you have an iPhone 4s or later with a SIM card installed. While roaming on a GSM network, iPhone has access to GSM network features. Charges may apply. Contact your carrier for more information. Set network options. Go to Settings > Cellular to:

Turn data roaming on or off Turn cellular data on or off Turn voice roaming on or off (CDMA) Use GSM networks abroad (CDMA) See Usage information on page 174. Turn off cellular services. Go to Settings, turn on Airplane Mode, then tap Wi-Fi and turn it on. Incoming phone calls are sent to voicemail. To resume cellular service, turn Airplane Mode off. Make calls to your contacts and favorites while traveling abroad. (GSM) Go to Settings > Phone and turn on Dial Assist. Dial Assist automatically adds the prefix or country code for calls to the U.S. Select a carrier network. Go to Settings > Carrier. This setting appears on GSM networks when youre outside your carriers network, and other local carrier data networks are available to use for your phone calls, visual voicemail, and cellular network Internet connections. You can make calls only on carriers that have a roaming agreement with your carrier. Additional fees may apply. Roaming charges may be billed to you by the other carrier, through your carrier. Get voicemail when visual voicemail isnt available. Dial your own number (with CDMA, add #

after your number), or touch and hold 1 on the numeric keypad. Phone settings Go to Settings > Phone to:

See the phone number for your iPhone Change the default text message replies for incoming calls Turn call forwarding, call waiting, and caller ID on or off (GSM) Turn TTY on or off Change your voicemail password (GSM) Require a PIN to unlock your SIM when you turn iPhone on (required by some carriers) Go to Settings > Sounds to:

Set ringtones and volume Set vibration options Set the sound for new voicemail Chapter 5 Phone 51 Draft APPLE CONFIDENTIAL Once you select a network, iPhone uses only that network. If the network is unavailable, No service appears on iPhone. Chapter 5 Phone 52 Draft APPLE CONFIDENTIAL Mail 6 Write messages Mail lets you access all of your email accounts, on the go. Change mailboxes or accounts. Delete, move, or mark multiple messages. Search for messages. Compose a message. Insert a photo or video. Tap the insertion point. Tap the arrows to see more choices. Also see Edit text on page 25.

, then tap Reply. You can turn off the indentation of the quoted text in Settings >

Quote some text when you reply. Tap the insertion point, then select the text you want to include. Tap Mail, Contacts, Calendars > Increase Quote Level. Send a message from a different account. Tap the From field to choose an account. Change a recipient from Cc to Bcc. After you enter recipients, you can drag them from one field to another or change their order. 53 Change mailboxes or accounts.Search for messages.Compose a message.Delete, move, or mark multiple messages.Draft APPLE CONFIDENTIAL Mark addresses outside certain domains. When youre addressing a message to a recipient thats not in your organizations domain, Mail can color the recipients name red to alert you. Go to Settings > Mail, Contacts, Calendars > Mark Messages, then define the domains that you dont want marked. You can enter multiple domains separated by commas, such as apple.com, example.org. Get a sneak peek Change how names are displayed in Settings > Mail, Contacts, Calendars > Short Name. See a longer preview. Go to Settings > Mail, Contacts, Calendars > Preview. You can show up to five lines. Is this message for me? Turn on Settings > Mail, Contacts, Calendars > Show To/Cc Label. If the label says Cc instead of To, you were just copied. You can also use the To/Cc mailbox, which gathers all mail addressed to you. To show or hide it, swipe to the right (or tap Mailboxes), then tap Edit. Finish a message later Look at another message while youre writing one. Swipe down on the title bar of a message youre writing. When youre ready to return to your message, tap its title at the bottom of the screen. If you have more than one message waiting to be finished, tap the bottom of the screen to see them all. Save a draft for later. If youre writing a message and want to finish it later, tap Cancel, then tap Save Draft. To get it back, touch and hold Compose. With OS X Yosemite, you can also handoff unfinished messages with your Mac. See Using continuity features on page 22. Chapter 6 Mail 54 Change how names are displayedin Settings > Mail, Contacts,Calendars > Short Name.Draft APPLE CONFIDENTIAL See important messages

, then tap Notify Me. While youre writing while reading the message. You can change the in the Subject field. To change how notifications appear, go to Get notified of replies to a message or thread. Tap a message, you can also tap Settings > Notifications > Mail > Thread Notifications. Gather important messages. Add important people to your VIP list, and their messages all appear in the VIP mailbox. Tap the senders name in a message, then tap Add to VIP. To change how notifications appear go to Settings > Notifications > Mail > VIP. Flag a message so you can find it later. Tap appearance of the flagged message indicator in Settings > Mail, Contacts, Calendars > Flag Style. To see the Flagged mailbox, tap Edit while viewing the Mailboxes list, then tap Flagged. Search for a message. Scroll to or tap the top of the message list to reveal the search field. Searching looks at the address fields, the subject, and the message body. To search multiple accounts at once, search from a smart mailbox, such as All Sent. Search by timeframe. Scroll to or tap the top of the messages list to reveal the search field, then type something like February meeting to find all messages from February with the word meeting. Search by message state. To find all flagged, unread messages from people in your VIP list, type flag unread vip. You can also search for other message attributes, such as attachment. Junk, be gone! Tap Junk folder. If you accidentally mark a message as junk, shake iPhone immediately to undo. Make a favorite mailbox. Favorites appear at the top of the Mailboxes list. To add one, tap Edit while viewing the Mailboxes list. Tap Add Mailbox, then select the mailboxes to add. Youll also get push notifications for your favorite mailboxes. Show draft messages from all of your accounts. While viewing the Mailboxes list, tap Edit, tap Add Mailbox, then turn on the All Drafts mailbox. while youre reading a message, then tap Move to Junk to file it in the Attachments Save a photo or video to Photos. Touch and hold the photo or video until a menu appears, then tap Save Image. Use an attachment with another app. Touch and hold the attachment until a menu appears, then tap the app you want to open the attachment with. Some attachments automatically show a banner with buttons you can use to open other apps. See messages with attachments. The Attachments mailbox shows messages with attachments from all accounts. To add it, tap Edit while viewing the Mailboxes list. Chapter 6 Mail 55 Draft APPLE CONFIDENTIAL Work with multiple messages Delete, move, or mark multiple messages. While viewing a list of messages, tap Edit. Select some messages, then choose an action. If you make a mistake, shake iPhone immediately to undo. Manage a message with a swipe. While viewing a list of messages, swipe left on a message to reveal a menu of actions. Swipe all the way to the left to select the first action. You can also swipe a message to the right to reveal another action. Choose the actions you want to appear in the menus at Settings > Mail, Contacts, Calendars > Swipe Options. Organize your mail with mailboxes. Tap Edit in the mailboxes list to create a new one, or to rename or delete one. (Some built-in mailboxes cant be changed.) There are several smart mailboxes, such as Unread, that show messages from all your accounts. Tap the ones you want to use. Recover a deleted message. Go to the accounts Trash mailbox, open the message, then tap and move the message. Or, if you just deleted it, shake iPhone to undo. To see deleted messages across all your accounts, add the Trash mailbox. To add it, tap Edit in the mailboxes list and select it from the list. Archive instead of delete. Instead of deleting messages, you can archive them so theyre still around if you need them. Turn Archive Mailbox in Settings > Mail, Contacts, Calendars > account name > Account > Advanced. To delete a message instead of archiving it, touch and hold then tap Delete. Stash your trash. You can set how long deleted messages stay in the Trash mailbox. Go to Settings > Mail, Contacts, Calendars > account name > Account > Advanced.

, See and save addresses Mark person as a VIP. Chapter 6 Mail 56 Mark person as a VIP.Draft APPLE CONFIDENTIAL Add someone to Contacts or make them a VIP. Tap the persons name or email address, then tap Add to VIP. You can also add their address to a new or existing contact. See who received a message. While viewing the message, tap More in the To field. Print messages Print a message. Tap Print an attachment or picture. Tap to view it, then tap See AirPrint on page 35.

, then tap Print. and choose Print. Mail settings Go to Settings > Mail, Contacts, Calendars, where you can:

Create a different mail signature for each account Add mail accounts Set Out of Office replies for Exchange mail accounts Bcc yourself on every message you send Turn on Organize by Thread to group related messages together Turn off confirmation for deleting a message Turn off Push delivery of new messages, to save on battery power Temporarily turn off an account Chapter 6 Mail 57 Draft APPLE CONFIDENTIAL Safari 7 Safari at a glance Use Safari on iPhone to browse the web. Use Reading List to collect webpages to read later. Add page icons to the Home screen for quick access. Use iCloud to see pages you have open on other devices, and to keep your bookmarks, history, and reading list up to date on your other devices. Tap to enter a web address or search item, or get quick access to your Favorites. To zoom, double tap an item or pinch. See your bookmarks, reading list, and shared links. View open tabs or open a new tab. Enter what youre searching for, then tap Go. View selected site. Or tap a suggestion. Share, print, and more. Revisit recent pages. Search the web 58 Share, print, and more.View open tabs or open a new tab.Tap to enter a web address or search item, or get quick access to your Favorites.To zoom, double tap an item or pinch.See your bookmarks, reading list, and shared links.Revisit recent pages.Enter what youre searching for, then tap Go.Or tap a suggestion.View selected site.Draft APPLE CONFIDENTIAL Search the web. Enter a URL or search term in the search field at the top of the page, then tap a search suggestion, or tap Go on the keyboard to search for exactly what you typed. If you dont want to see suggested search terms, go to Settings > Safari, then (under Search) turn off Search Engine Suggestions. Quick search a site youve visited before. Enter the name of the site, followed by your search term. For example, enter wiki einstein to search Wikipedia for einstein. Go to Settings > Safari >

Quick Website Search to turn this feature on or off. Have your favorites top the list. Select them in Settings > Safari > Favorites. Search the page. Scroll to the bottom of the suggested results list and tap the entry under On This Page. Tap Choose your search tool. Go to Settings > Safari > Search Engine. to see the next occurrence on the page. Browse the web Touch and hold a link to see these options. Look before you leap. To see the URL of a link before you go there, touch and hold the link. Open a link in a new tab. Touch and hold the link, then tap Open in New Tab. If youd rather open new pages in the background, go to Settings > Safari > Open in New Tab. Browse open pages. Tap to the left. in the upper-left corner, or swipe the page

. To close a page, tap Scroll to the bottom to see pages open on other devices.

. View recently closed pages. Touch and hold View tabs open on your other devices. If you turn on Safari in Settings > iCloud, you can view tabs that you have open on your other devices. Tap

, then scroll to the list at the bottom of the page. Get back to the top. Tap the top edge of the screen to quickly return to the top of a long page. See more. Turn iPhone to landscape orientation. See the latest. Tap See a tabs history. Touch and hold next to the address in the search field to update the page. or

. Chapter 7 Safari 59 Touch and hold a link to see these options.Scroll to the bottom to see pages open on other devices.Draft APPLE CONFIDENTIAL View the desktop version of a site. If you want to see the full desktop version of a site instead of the mobile version, tap the search field, pull down the display of your favorites, then tap Request Desktop Site. Keep bookmarks Bookmarks Shared links and subscriptions Reading list

.

, then tap

, then tap Edit.

(or touch and hold

), then tap Add Bookmark. Bookmark the current page. Tap View your bookmarks. Tap Get organized. To create a folder for bookmarks, tap Add a webpage to your favorites. Open the page, tap the search field, drag down, then tap Add to Favorites. Quickly see your favorite and frequently visited sites. Tap the Search field to see your favorites. Scroll down to see frequently visited sites. Edit your favorites. Tap the search field, then touch and hold a page or folder. You can delete the item, or edit it to rename or move it. Choose which favorites appear when you tap the search field. Go to Settings > Safari >

Favorites. Bookmarks bar on your Mac? Turn on Safari in Settings > iCloud if you want items from the bookmarks bar in Safari on your Mac to appear in Favorites on iPhone. Save an icon for the current page on your Home screen. Tap The icon appears only on the device where you create it.

, then tap Add to Home Screen. Save a reading list for later Save interesting items in your reading list so you can revisit them later. You can read pages in your reading list even when youre not connected to the Internet. Add the current page to your reading list. Tap Add a linked page without opening it. Touch and hold the link, then tap Add to Reading List. View your reading list. Tap

, then tap Add to Reading List.

, then tap

. Chapter 7 Safari 60 BookmarksReading listShared links and subscriptionsDraft APPLE CONFIDENTIAL Delete something from your reading list. Swipe left on the item in your reading list. Dont want to use cellular data to download reading list items? Turn off Settings > Safari > Use Cellular Data. Shared links and subscriptions You can view links shared from social media, such as Twitter, or feeds from your subscriptions.

.

, then tap View shared links and subscriptions. Tap Subscribe to a feed. Go to a site that provides a subscription feed, tap Links, then confirm by tapping Add to Shared Links. Delete a subscription. Tap tap Spread the news. Tap next to the subscription you want to delete.

, tap

.

, tap Add to Shared

, tap Subscriptions below the list of your shared links, then Tap to share with a nearby friend using AirDrop. Share using the usual methods. Fill in forms Whether youre logging in to a website, signing up for a service, or making a purchase, you can fill in a web form using the onscreen keyboard or have Safari fill it in for you using AutoFill. Tired of always having to log in? When youre asked if you want to save the password for the site, tap Yes. The next time you visit, your user name and password will be filled in for you. Fill in a form. Tap any field to bring up the onscreen keyboard. Tap keyboard to move from field to field. Fill it in automatically. Go to Settings > Safari > Passwords & Autofill and turn on Use Contact Info. Then, tap AutoFill above the onscreen keyboard when youre filling in the form. Not all websites support AutoFill. Add a credit card for purchases. Go to Settings > Safari > Passwords & Autofill > Saved Credit Cards > Add Credit Card. To enter the information without typing it, tap Use Camera, then hold iPhone above the card so that the image of the card fits in the frame. You can also add a credit card by accepting when Safari offers to save it when you make an online purchase. above the onscreen or Chapter 7 Safari 61 Tap to share with a nearby friend using AirDrop.Share using the usual methods.Draft APPLE CONFIDENTIAL Use your credit card information. Look for the AutoFill Credit Card button above the onscreen keyboard whenever youre in a credit card field. Your cards security code isnt stored, so you still enter that yourself. If youre not using a passcode for iPhone, you might want to start; see Use a passcode with data protection on page 38. Submit a form. Tap Go, Search, or the link on the webpage. Avoid clutter with Reader Use Safari Reader to focus on a pages primary content. pitchfork.com Tap to view the page in Reader. at the left end of the address field. If you dont see the icon, Reader Focus on content. Tap isnt available for the page youre looking at. Share just the good stuff. To share just the article text and a link to it, tap page in Reader. Return to the full page. Tap the reader icon in the address field again. while viewing the Privacy and security You can adjust Safari settings to keep your browsing activities to yourself and protect yourself from malicious websites. Want to keep a low profile? Turn on Settings > Safari > Do Not Track. Safari will ask websites you visit to not track your browsing, but bewarea website can choose not to honor the request. Control cookies. Go to Settings > Safari > Block Cookies. To remove cookies already on iPhone, go to Settings > Safari > Clear History and Website Data. Let Safari create secure passwords and store them for you. Tap the password field when creating a new account, and Safari will offer to create a password for you. Erase your browsing history and data from iPhone. Go to Settings > Safari > Clear History and Website Data. Visit sites without making history. Tap added to History on your iPhone. To put away your private sites, tap You can close the pages, or keep them for viewing the next time you use Private Browsing Mode. Watch for suspicious websites. Turn on Settings > Safari > Fraudulent Website Warning.

, then tap Private. Sites you visit will no longer be

, then tap Private again. Chapter 7 Safari 62 Tap to view the page in Reader.Draft APPLE CONFIDENTIAL Safari settings Go to Settings > Safari, where you can:

Choose your search engine and configure search results Provide AutoFill information Choose which favorites are displayed when you search Have links open in a new page or in the background Block pop-ups Tighten privacy and security Clear your history and website data Choose whether to use cellular data for Reading List items Configure other advanced settings Chapter 7 Safari 63 Draft APPLE CONFIDENTIAL Music 8 Get music Get music and other audio content on to iPhone in the following ways:

Purchase music from the iTunes Store: Go to iTunes Store. While browsing playlists and albums in Music, you can tap Store. See Chapter 22, iTunes Store, on page 111. iCloud: Get access to all your iTunes songs, no matter which device you used to purchase them. Use iTunes Match to include CDs and other music you import. See iCloud and iTunes Match on page 67. Family Sharing: To download songs purchased by other members of your family, go to iTunes Store, tap More, tap Purchased, then choose a family member. See Family Sharing on page 32. Sync content with iTunes on your computer: See Sync with iTunes on page 17. WARNING: For important information about avoiding hearing loss, see Important safety information on page 170. iTunes Radio Featured stations provide a great way to explore and enjoy new music in a variety of genres. You can also create your own custom stations, based on your pick of artist, song, or genre. See iCloud and iTunes Match on page 67. 64 Draft APPLE CONFIDENTIAL Note: iTunes Radio may not be available in all areas. For more information about iTunes Radio, go to support.apple.com/kb/HT5848. Tap to play a station. When you pick a station and play a song, the Now Playing screen shows the album art and the playback controls. Tap to find out more, create a new station, fine-tune the station, or share it. Create your own station based on an artist, genre, or song. Tap New Station on the iTunes Radio screen. Choose a genre, or do a search for your favorite artist, song, or genre. You can also create a station from the Now Playing screen by tapping the Create button. Edit your stations. Tap Edit. You can include or exclude other artists, songs, or genres, or delete a station. Influence upcoming song selections. On the Now Playing screen, tap Like This or Never Play This Song. You can also add the song to your iTunes Wish List. Skip to the next song. On the Now Playing screen, tap songs per hour. See the songs youve played, or view your wishlist. Tap History, then tap Played or Wishlist. You can purchase songs for your library. Tap a song to preview it. Purchase songs for your personal library. On the Now Playing screen, tap the price button. Share a station you created. On the Now Playing screen, tap

. You can skip a limited number of

, then tap Share Station.

, then tap Play More Chapter 8 Music 65 Tap to playa station.Draft APPLE CONFIDENTIAL Browse and play Browse your music by playlist, artist, or other category. For other browse options, tap More. Tap any song to play it. You can listen to audio from the built-in speaker, from headphones attached to the headset jack, or from wireless Bluetooth stereo headphones paired with iPhone. If headphones are attached or paired, no sound comes from the speaker. Tap to listen. See additional browse options. Choose how to browse. Tired of tapping More? To rearrange the buttons, tap More, then tap Edit and drag a button onto the one you want to replace. The Now Playing screen provides playback controls and shows you whats playing. Back Track list Playhead Volume Tap to create a Genius Playlist or an iTunes Radio station. Display lyrics. If youve added lyrics to the song, tap the album cover to see them. To add lyrics, use the songs Info window in iTunes on your computer, then sync the song to iPhone. Skip to any point in a song. Drag the playhead. Slow down the scrub rate by sliding your finger down the screen. Chapter 8 Music 66 Choose how to browse.See additional browse options.Tap to listen.Track listPlayheadBackVolumeTap to create a Genius Playlistor an iTunes Radio station.Draft APPLE CONFIDENTIAL Shuffle. Tap Shuffle on the Now Playing screen to play your tunes in random order. See all tracks from the album containing the current song. Tap

. To play a track, tap it. Tap to rate this song for creating smart playlists in iTunes. Return to the Now Playing screen. Album tracks Search music. While browsing, tap the status bar to reveal the search field at the top of the screen, then enter your search text. You can also search audio content from the Home screen. See Search on page 28. Rate a song for smart playlists in iTunes. Tap the screen to reveal the rating dots, then tap a dot to assign a rating. Get audio controls from the Lock screen or when using another app. Swipe up from the bottom edge of the screen to open Control Center. See Control Center on page 29. Currently playing song Play music on AirPlay speakers or Apple TV. Swipe up from the bottom edge of the screen to open Control Center, then tap

. See AirPlay on page 35. icon shows the songs you have in iCloud. Just click a song to play it. iCloud and iTunes Match With iCloud, you can access all of the music you purchase in the iTunes Store on all of your devices. The Automatically download music purchased on another device. Go to Settings > iTunes &

App Store, sign in using your Apple ID, then turn on Music under Automatic Downloads. Download previous purchases. In iTunes Store, go to More > Purchased > Music. Download music if youre going somewhere you wont have Wi-Fi. Click youll want to play. Or download entire albums and playlists. Remove a song thats been downloaded. Swipe left, then tap Delete. The song is removed from iPhone, but remains available from iCloud. Downloaded music is also removed automatically from iPhone as space is needed, starting with the oldest and least-played songs. View only music thats downloaded. Go to Settings > iTunes & App Store. Under Show All, turn off Music. next to the songs With an iTunes Match subscription, you can store all your music in iCloud (up to 25,000 songs) even songs you imported from CDs. Note: iTunes Match may not be available in all areas. See support.apple.com/kb/HT5085. Subscribe to iTunes Match. Go to Settings > iTunes & App Store > Subscribe to iTunes Match. See www.apple.com/itunes/itunes-match. Chapter 8 Music 67 Tap to rate this song for creating smart playlists in iTunes.Return to the Now Playing screen.Album tracksCurrentlyplaying songDraft APPLE CONFIDENTIAL Turn on iTunes Match. Go to Settings > iTunes & App Store. Sign in if you havent already. Album Wall Rotate iPhone to view your entire library by album art. Swipe left or right to see other albums. Tap an album to see its songs. Audiobooks Audiobook controls and info appear on the Now Playing screen when you begin playback. Playhead Scrubber bar Skip 15 seconds. Playback speed Repeat the previous 15 seconds. Playlists Create playlists to organize your music. View Playlists, tap New Playlist near the top of the list, then enter a title. Tap to add songs or videos. Edit a playlist. Select the playlist, then tap Edit. Add more songs: Tap Delete a song: Tap

.

, then tap Remove. Deleting a song from a playlist doesnt delete it from iPhone. Chapter 8 Music 68 Repeat the previous 15 seconds.PlayheadScrubber barPlayback speedSkip 15 seconds.Draft APPLE CONFIDENTIAL

. Change the song order: Drag New and changed playlists are copied to your iTunes library the next time you sync iPhone with your computer, or through iCloud if youve subscribed to iTunes Match. Clear or delete a playlist you created on iPhone. Select the playlist, then tap Clear or Delete. Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud. Geniusmade for you A Genius playlist is a collection of songs from your library that go together. Genius is a free service, but it requires an Apple ID. A Genius Mix is a selection of songs of the same kind of music, recreated from your library each time you listen to the mix. Turn on Genius. Tap Playlists, tap Genius Playlist, then tap Turn On Genius. Browse and play Genius Mixes. Tap Genius (tap More first, if Genius isnt visible). Swipe left or right to access other mixes. To play a mix, tap Make a Genius playlist. View Playlists, then tap Genius Playlist and choose a song. Or from the Now Playing screen, tap Create, then tap Genius Playlist. Replace the playlist using a different song: Tap New and pick a song. Refresh the playlist: Tap Refresh. Save the playlist: Tap Save. The playlist is saved with the title of the song you picked, and

. marked by

. If you subscribe to iTunes Match, your Genius playlists are stored in iCloud. Genius playlists created on iPhone are copied to your computer when you sync with iTunes. Note: Once a Genius playlist is synced to iTunes, you cant delete it directly from iPhone. Use iTunes to edit the playlist name, stop syncing, or delete the playlist. Delete a saved Genius playlist. Tap the Genius playlist, then tap Delete. Siri and Voice Control You can use Siri (iPhone 4s or later) or Voice Control to control music playback. See Chapter 4, Siri, on page 43 and Voice Control on page 28. Use Siri or Voice Control. Press and hold the Home button. Play or pause music: Say play or play music. To pause, say pause, pause music, or stop. You can also say next song or previous song. Play an album, artist, or playlist: Say play, then say album, artist, or playlist and the name. Shuffle the current playlist: Say shuffle. Find out more about the current song: Say whats playing, who sings this song, or who is this song by. Use Genius to play similar songs: Say Genius or play more songs like this. Chapter 8 Music 69 Draft APPLE CONFIDENTIAL Home Sharing Home Sharing lets you play music, movies, and TV shows from the iTunes library on your Mac or PC. iPhone and your computer must be on the same Wi-Fi network. Note: Home Sharing requires iTunes 10.2 or later, available at www.itunes.com/download. Bonus content, such as digital booklets and iTunes Extras, cant be shared. Play music from your iTunes library on iPhone. 1 In iTunes on your computer, choose File > Home Sharing > Turn On Home Sharing. Log in, then click Create Home Share. 2 On iPhone, go to Settings > Music, then log in to Home Sharing using the same Apple ID and password. 3 In Music, tap More, then tap Shared and choose your computers library. Return to content on iPhone. Tap Shared and choose My iPhone. Music settings Go to Settings > Music to set options for Music, including:

Sound Check (to normalize the volume level of your audio content) Equalization (EQ) Note: EQ settings affect all sound output, including the headset jack and AirPlay. (EQ settings generally apply only to music played from the Music app.) The Late Night setting compresses the dynamic range of the audio output, reducing the volume of loud passages and increasing the volume of quiet passages. You might want to use this setting when listening to music on an airplane or in some other noisy environment. (The Late Night setting applies to all audio outputvideo as well as music.) Lyrics info Grouping by album artist Set the volume limit. Go Settings > Music > Volume Limit. Note: In some European Union (EU) countries, iPhone may indicate when youre setting the volume above the EU recommended level for hearing safety. To increase the volume beyond this level, you may need to briefly release the volume control. To limit the maximum headset volume to this level, go to Settings > Music > Volume Limit and turn on EU Volume Limit. To prevent changes to the volume limit, go to Settings > General > Restrictions. Prevent changes to the volume limit. Go to Settings > General > Restrictions > Volume Limit and tap Dont Allow Changes. Chapter 8 Music 70 Draft APPLE CONFIDENTIAL Messages 9 SMS, MMS, and iMessage Messages lets you exchange text messages with other SMS and MMS devices using your cellular connection, and with other iOS devices and Mac computers using iMessage. iMessage is an Apple feature that lets you send messages over Wi-Fi (or cellular connections) to others using iOS 5 or later, or OS X Mountain Lion or later. Messages you send using iMessage dont count against your text messaging plan with your carrier. Messages can include photos, videos, and other info. You can see when other people are typing, and let them know when youve read their messages. If youre signed into iMessage using the same Apple ID on other iOS devices or a Mac (OS X Mavericks or later), you can start a conversation on one device and continue it on another. For security, messages you send with iMessage are encrypted before theyre sent. If you have other iOS 8 devices that are signed in to iMessage with the same Apple ID as your iPhone, you can also send and receive SMS and MMS messages with those devices. Similarly, you can send and receive SMS and MMS messages with the Messages app on a Mac with OS X Yosemite, if it is signed in to iMessage using the same Apple ID as your iPhone. Cellular charges may apply to your iPhone. WARNING: For important information about avoiding distractions while driving, see Important safety information on page 170. 71 Draft APPLE CONFIDENTIAL Send and receive messages Get info, make a voice or FaceTime call, share your location, or mute notifications. Blue indicates an iMessage conversation. Send a photo or video. Add your voice to the conversation.

, then

, then enter a phone number or email address, or tap appears if a message cant be sent. Tap the alert in a conversation to try Start a conversation. Tap choose a contact. You can also start a conversation by tapping a phone number in Safari, Contacts, or Calendar. An alert badge sending the message again. Double-tap to send the message as an SMS text message. Resume a conversation. Tap the conversation in the Messages list. Use picture characters. Go to Settings > General > Keyboard > Keyboards > Add New Keyboard, then tap Emoji to make that keyboard available. When you type a message, tap to change to the Emoji keyboard. See Special input methods on page 166. See what time a message was sent or received. Drag any bubble to the left. See a persons contact info. In a conversation, tap Details, then tap perform actions, such as making a voice or FaceTime call. See earlier messages in the conversation. Tap the status bar to scroll to the top. Tap Load Earlier Messages, if necessary. Send messages to a group (iMessage and MMS). Tap MMS, group messaging must also be turned on in Settings > Messages, and replies are sent only to youthey arent copied to the other people in the group. Give a group a name. While viewing the conversation, tap Details, then drag down and enter the name in the Subject line. Leave a group. Tap Details, then tap Leave this Conversation. Keep it quiet. Tap Details, then turn on Do Not Disturb to mute notifications for the conversation. Block unwanted messages. On a contact card, tap Block this Caller. You can see someones

. You can also contact card while viewing a message by tapping Details, then tapping block callers in Settings > Messages > Blocked. You will not receive voice calls, FaceTime calls, or text messages from blocked callers. For more information about blocking calls, see support.apple.com/kb/HT5845.

, then enter multiple recipients. With

. Tap the info items to Chapter 9 Messages 72 Send a photo or video.Add your voice to the conversation.Get info, make a voice or FaceTime call, share your location, or mute notifications.Blue indicatesan iMessageconversation.Draft APPLE CONFIDENTIAL Manage conversations Conversations are saved in the Messages list. A blue dot conversation to view or continue it. indicates unread messages. Tap a

. View the Messages list. Swipe to the right. Forward a message. Touch and hold a message or attachment, tap More, select additional items if desired, then tap Delete a message. Touch and hold a message or attachment, tap More, select more if desired, then tap Delete a conversation. In the Messages list, swipe the conversation to the left, then tap Delete. Search conversations. In the Messages list, tap the top of the screen to display the search field, then enter the text youre looking for. You can also search conversations from the Home screen. See Search on page 28.

. Share photos, videos, your location, and more With iMessage or MMS, you can send and receive photos and videos, and send locations, contact info, and voice memos. The size limit of attachments is determined by your service provider iPhone may compress photo and video attachments when necessary. Send photos and videos from your Photos library. Tap Photo Library for older ones. Select the items you want to send. View attachments. While viewing a conversation, tap Details. Attachments are shown in reverse chronological order at the bottom of the screen. Tap an attachment to see it in full screen. In full-

screen mode, tap Keep audio or video attachments. Audio or video attachments that you receive are deleted automatically in two minutes unless you tap Keep. Delete an attachment. Touch and hold it, then tap Delete. Send your current location. Tap Details, then tap Send My Current Location to send a map that shows where you are.

. Recent shots are right there; tap to view the attachments as a list. Chapter 9 Messages 73 Draft APPLE CONFIDENTIAL Share your location. Tap Details, then tap Share My Location and specify the length of time. The person youre texting can see your location by tapping Details. To turn Share My Location on or off, or to select the device that determines your location, go to Settings > iCloud > Share My Location (under Advanced). Send items from another app. In the other app, tap Share or Share, save, or print an attachment. Tap the attachment, then tap Copy a photo or video. Touch and hold the attachment, then tap Copy.

, then tap Message.

. Messages settings Go to Settings > Messages, where you can:

Turn iMessage on or off Notify others when youve read their messages Specify phone numbers, Apple IDs, and email addresses to use with Messages SMS and MMS options Show the Subject field Block unwanted messages Set how long to keep messages Automatically keep audio and video attachments Manage notifications for messages. See Do Not Disturb on page 31. Set the alert sound for incoming text messages. See Sounds and silence on page 31. Chapter 9 Messages 74 Draft 10 APPLE CONFIDENTIAL Calendar Calendar at a glance View list of events. Change calendars or accounts. View invitations.

, then enter text in the search field. The titles, invitees, locations, and

, then fill in the event details. If you add a location and choose Alert > Time Add an event. Tap to leave, Calendar reminds you of the event based on the current travel time to get there. Search for events. Tap notes for the calendars youre viewing are searched. View a weekly calendar. Rotate iPhone sideways. Change your view. Tap a year, month, or day to zoom in or out on your calendar. In Week or Day view, pinch to zoom in or out. View a list of events. In month view, tap Change the color of a calendar.Tap Calendars, then tap color from the list. For some calendar accounts, such as Google, the color is set by the server. Adjust an event. Touch and hold the event, then drag it to a new time, or adjust the grab points. to see a days events. In day view, tap next to the calendar and choose a

. Invitations If you have an iCloud account, a Microsoft Exchange account, or a supported CalDAV account, you can send and receive meeting invitations. 75 Change calendars or accounts.View invitations.View list of events.Draft APPLE CONFIDENTIAL Invite others to an event. Tap an event, tap Edit, then tap Invitees. Type names, or tap to pick people from Contacts. If you dont want to be notified when someone declines a meeting, go to Settings > Mail, Contacts, Calendar > Show Invitee Declines. RSVP. Tap an event youve been invited to, or tap Inbox and tap an invitation. If you add comments (which may not be available for all calendars), your comments can be seen by the organizer but not by other attendees. To see events youve declined, tap Calendars, then turn on Show Declined Events. Schedule a meeting without blocking your schedule. Tap the event, then tap Availability and tap free. Or if its an event you created, tap Show As and tap free. The event stays on your calendar, but it doesnt appear as busy to others who send you invitations. Quickly send an email to attendees. Tap the event, tap Invitees, then tap

. Use multiple calendars Select which calendars to view. Turn on Facebook events in Settings >

Facebook. Turn on iCloud, Google, Exchange, or Yahoo! calendars. Go to Settings > Mail, Contacts, Calendars, tap an account, then turn on Calendar. Subscribe to a calendar. Go to Settings > Mail, Contacts, Calendars, then tap Add Account. Tap Other, then tap Add Subscribed Calendar. Enter the server and filename of the .ics file to subscribe to. You can also subscribe to an iCalendar (.ics) calendar published on the web, by tapping a link to the calendar. Add a CalDAV account. Go to Settings > Mail, Contacts, Calendars, tap Add Account, then tap Other. Under Calendars, tap Add CalDAV Account. View the Birthdays calendar. Tap Calendars, then tap Birthdays to include birthdays from Contacts with your events. If youve set up a Facebook account, you can also include your Facebook friends birthdays. View the Holidays calendar. Tap Calendars, then tap Holidays to include national holidays with your events. See multiple calendars at once. Tap Calendars, then select the calendars you want to view. Move an event to another calendar. Tap the event, tap Edit, then tap Calendars and select a calendar to move it to. Chapter 10 Calendar 76 Turn on Facebook events in Settings > Facebook.Select which calendars to view.Draft APPLE CONFIDENTIAL Share iCloud calendars With Family Sharing, a calendar shared with all the members of your family is created automatically. See Family Sharing on page 32.You can also share an iCloud calendar with other iCloud users. When you share a calendar, others can see it, and you can let them add or change events. You can also share a read-only version that anyone can subscribe to. You can also share a calendar with family members. Create an iCloud calendar. Tap Calendars, tap Edit, then tap Add Calendar in the iCloud section. Share an iCloud calendar. Tap Calendars, tap Edit, then tap the iCloud calendar you want to share. Tap Add Person and enter a name, or tap to browse your Contacts. Those you invite receive an email invitation to join the calendar, but they need an iCloud account in order to accept. Change a persons access to a shared calendar. Tap Calendars, tap Edit, tap the shared calendar, then tap the person. You can turn off their ability to edit the calendar, resend the invitation to join the calendar, or stop sharing the calendar with them. Turn off notifications for shared calendars. When someone modifies a shared calendar, youre notified of the change. To turn off notifications for shared calendars, go to Settings > Mail, Contacts, Calendars > Shared Calendar Alerts. Share a read-only calendar with anyone. Tap Calendars, tap Edit, then tap the iCloud calendar you want to share. Turn on Public Calendar, then tap Share Link to copy or send the URL for your calendar. Anyone can use the URL to subscribe to the calendar using a compatible app, such as Calendar for OS X. Calendar settings Several settings in Settings > Mail, Contacts, Calendars affect Calendar and your calendar accounts. These include:

Syncing of past events (future events are always synced) Alert tone played for new meeting invitations Default calendar for new events Default time for alerts Time zone support, to show dates and times using a different time zone Which day starts the week Display of Chinese, Hebrew, or Islamic dates Chapter 10 Calendar 77 Draft

 

 

APPLE CONFIDENTIAL Photos 11 View photos and videos Photos lets you view the photos and videos that you:

Took on iPhone Have in your iCloud Photo Library (see iCloud Photo Library on page 79) Received from others in shared albums (see iCloud Photo Sharing on page 80) Synced from your computer (see Sync with iTunes on page 17) Saved from an email, text message, webpage, or screenshot Tap to view full-screen. View your photos and videos. Tap Photos. Photos automatically organizes your photos and videos by year, by collection, and by moment. To quickly browse the photos in a collection or year, touch and hold for a moment, then drag. By default, Photos displays a representative subset of your photos when you view by year or by collection. To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos. View by location. While viewing by year or by collection, tap location information appear on a map, showing where they were taken.

. Photos and videos that include While viewing a photo or video, tap to show and hide the controls. Swipe left or right to go forward or backward. 78 Tap to view full-screen.Draft APPLE CONFIDENTIAL Search photos. From Albums or Photos, tap to search by date (month and year), place (city and state), or Nearby. Search also keeps your Recent Searches on hand and gives you a list of suggested searches. Zoom in or out. Double-tap, or use a pinching motion. When you zoom in, you can drag to see other parts of the photo. Play a video. Tap Play a slideshow. While viewing a photo, tap

, then tap Slideshow. Select options, then tap Start Slideshow. To stop the slideshow, tap the screen. To set other slideshow options, go to Settings > Photos & Camera.

. To toggle between full screen and fit-to-screen, double-tap the display. To stream a slideshow or video to a TV, see AirPlay on page 35. Organize your photos and videos Mark your favorites. While viewing a photo, tap album. A photo can be part of another album as well as Favorites. Create a new album. Tap Albums, tap to add to the album, then tap Done. to automatically add it to the Favorites

, enter a name, then tap Save. Select photos and videos Note: Albums created on iPhone arent synced back to your computer. Add items to an existing album. While viewing thumbnails, tap Select, select items, tap Add To, then select the album. Manage albums. While viewing your album list, tap Edit. Rename an album: Select the album, then enter a new name. Rearrange albums: Drag Delete an album: Tap

. Only albums created on iPhone can be renamed or deleted. Hide photos you want to keep but not show. Touch and hold a photo, then choose Hide. The photo is moved to the Hidden album. Touch and hold a hidden photo to Unhide it.

. iCloud Photo Library You can store all your photos and videos in your iCloud Photo Library and access them from your iCloud-enabled iOS devices and at icloud.com. Note: To use iCloud Photo Library, iPhone must be connected to the Internet. Turn on iCloud Photo Library. Go to Settings > iCloud > Photos. Or go to Settings > Photos &

Camera. Your original high-resolution photos and videos are uploaded to iCloud automatically. Lighter-

weight versions, perfect for viewing, are kept on iPhone. You can make edits and see the changes everywhere. (See Edit photos and trim videos on page 82.) Download a full-resolution photo or video. Pinch to zoom in to 100%, or tap Edit. Keep a full-resolution photo or video on iPhone. Keep all your photos and videos in full-resolution on iPhone. Go to Settings > iCloud > Photos, then choose Download and Keep Originals. Chapter 11 Photos 79 Draft APPLE CONFIDENTIAL If your uploaded photos exceed 5 GB of storage, you can purchase more storage. Go to Settings

> iCloud > Storage > Change Storage Plan. My Photo Stream View the photos you take with iPhone on your other devices, automatically. Turn on My Photo Stream in Settings > Photos & Camera. Or go to Settings > iCloud > Photos. Note: If you turn on iCloud Photo Library, My Photo Stream is automatically turned on. My Photo Stream photos and videos appear in your Recently Added album. Photos you take are automatically added to My Photo Stream when you leave the Camera app and iPhone is connected to the Internet via Wi-Fi. All photos added to your Recently Added albumincluding screenshots and photos saved from email, for exampleappear in My Photo Stream. Photos added to My Photo Stream on your other devices appear in Recently Added albums on iPhone. iOS devices can keep up to 1000 of your most recent photos in My Photo Stream; your computers can keep all My Photo Stream photos permanently. Note: Photos uploaded to My Photo Stream dont count against your iCloud storage. Manage My Photo Stream contents. In the My Photo Stream album, tap Select. Save your best shots on iPhone: Select the photos, then tap Add To. Share, print, or copy: Select the photos, then tap Delete photos: Select the photos, then tap

.

. Note: Although deleted photos are removed from My Photo Stream on all your devices, the original photos remain in Photos on the device on which they were originally taken. Photos that you save to another album on a device or computer are also not deleted. To delete photos from My Photo Stream, you need iOS 5.1 or later on iPhone and on your other iOS devices. See support.apple.com/kb/HT4486. iCloud Photo Sharing With iCloud Photo Sharing, you can create albums of photos and videos to share, and subscribe to other peoples shared albums. You can invite others using iCloud Photo Sharing (with iOS 6 or later or OS X Mountain Lion or later) to view your albums, and they can leave comments if they wish. If theyre using iOS 7 or OS X Mavericks or later, they can add their own photos and videos. You can also publish your album to a website for anyone to view. Chapter 11 Photos 80 Draft APPLE CONFIDENTIAL Note: To use iCloud Photo Sharing, iPhone must be connected to the Internet. Tap to share with a nearby friend using AirDrop. Turn on iCloud Photo Sharing. Go to Settings > iCloud > Photos. Or go to Settings > Photos &

Camera.

, select items, then tap Done. You can

, tap iCloud Photo Sharing, tap Shared Album, then select a shared album Note: iCloud Photo Sharing works over both Wi-Fi and cellular networks. Cellular data charges may apply. See Usage information on page 174. Share photos and videos. While viewing a photo or video, or when youve selected multiple photos or videos, tap or create a new one. You can invite people to view your shared album using their email address or the mobile phone number they use for iMessage. Enable a public website. Select the shared album, tap People, then turn on Public Website. Tap Share Link if you want to announce the site. Add items to a shared album. View a shared album, tap add a comment, then tap Post. You can also add items to a shared album when youre viewing photos or albums. Tap

, tap iCloud Photo Sharing, tap Shared Album, then select the shared album or create a new one. Delete photos from a shared album. Select the shared album, tap Select, select the photos or videos you want to delete, then tap owner of the photo. Delete comments from a shared album. Select the photo or video that contains the comment. Touch and hold the comment, then tap Delete. You must be the owner of the shared album, or the owner of the comment. Rename a shared album. Tap Shared, tap Edit, then tap the name and enter a new one. Add or remove subscribers, or turn Notifications on or off. Select the shared album, then tap People. Subscribe to a shared album. When you receive an invitation, tap the Shared tab (

Accept. You can also accept an invitation in an email. Add items to a shared album you subscribed to. View the shared album, then tap items, then tap Done. You can add a comment, then tap Post.

. You must be the owner of the shared album, or the

), then tap

. Select Chapter 11 Photos 81 Tap to share with a nearby friend using AirDrop.Draft APPLE CONFIDENTIAL See your shared Family Sharing album. When Family Sharing is set up, a shared album called Family is automatically created in Photos on all family members devices. Everyone in the family can contribute photos, videos, and comments to the album, and be notified whenever something new is added. For more information about setting up Family Sharing, see Family Sharing on page 32. Other ways to share photos and videos You can share photos and videos in Mail or Messages, or through other apps you install. Share or copy a photo or video. View a photo or video, then tap screen to show the controls.

. If you dont see

, tap the Tap More in Sharing to turn on the apps you want to use for sharing. The size limit of attachments is determined by your service provider. iPhone may compress photo and video attachments, if necessary. You can also copy a photo or video, and then paste it into an email or text message (MMS or iMessage). Share or copy multiple photos and videos. While viewing by moment, tap Share. Save or share a photo or video you receive. Email: Tap to download it if necessary, then touch and hold the item to see sharing and other options. Text message: Tap the item in the conversation, then tap

. Photos and videos that you receive in messages or save from a webpage are saved to your Recently Added album in Photos. Edit photos and trim videos You can edit photos right on iPhone. If your photos are stored in iCloud, they are updated across all your devices set up with iCloud, and both your original and edited versions are saved. Edit a photo. View the photo full screen, tap Edit, then tap one of the tools. To edit a photo not taken with iPhone, tap the photo, tap Edit, then tap Duplicate and Edit. Auto-enhance With the Remove Red-eye tool improves a photos exposure, contrast, saturation, and other qualities.

, tap each eye that needs correcting. Chapter 11 Photos 82 Draft APPLE CONFIDENTIAL Tap

, and Photos suggests an optimal crop, but you can drag the corners of the grid tool to set your own crop. Move the wheel to tilt or straighten the photo. Tap Auto to align the photo with the horizon, and tap Reset to undo alignment changes. Tap degrees. Tap to choose a standard crop ratio, such as 2:3 or Square. to rotate the photo 90 Rotate photo. Move the wheel to tilt or straighten. Choose a standard photo format. Photo filters Tap Adjustments let you apply different color effects, such as Mono or Chrome. to use Light, Color, and B&W (black & white) sliders. Tap next to Light to choose the element you want to adjust: Light, Brightness, Contrast, Exposure, Highlights, or Shadows. Tap Tap the slider to the desired effect. next to Color to choose among Color, Contrast, and Vibrancy adjustments. next to B&W to choose among Intensity, Neutrals, Tone, and Grain adjustments. Move Compare the edited version to the original. Touch and hold the photo to view the original. Release to see your edits. Dont like the results? Tap Cancel, then tap Discard Changes. Tap Done to save changes. Revert to original. After you edit a photo and save your edits, you can revert to the original image. Tap the image, tap Edit, then tap Revert. Trim a video. Tap the screen to display the controls, drag either end of the frame viewer, then tap Trim. Important: If you choose Trim Original, the trimmed frames are permanently deleted from the original video. If you choose Save as New Clip, a new trimmed video clip is saved in your Videos album and the original video is unaffected. Set the Slo-Mo section of a video. (iPhone 5s or later) Use the vertical bars beneath the frame viewer to set the section of the video you want to play in slow motion. Print photos Print to an AirPrint-enabled printer. Chapter 11 Photos 83 Rotate photo. Move the wheel to tilt or straighten. Choose a standard photo format.Draft APPLE CONFIDENTIAL Print a single photo: Tap Print multiple photos: While viewing a photo album, tap Select, select the photos, tap

, then tap Print.

, then tap Print. See AirPrint on page 35. Photos settings Settings for Photos are in Settings > Photos & Camera. These include:

iCloud Photo Library, My Photo Stream, Upload Burst Photos, and Photo Sharing Photos Tab Slideshow Camera Grid HDR (High Dynamic Range) Chapter 11 Photos 84 Draft APPLE CONFIDENTIAL Camera 12 Camera at a glance Quick! Get the camera! From the Lock screen, just swipe edge of the screen to open Control Center, then tap

. up. Or swipe up from the bottom 85 Draft APPLE CONFIDENTIAL Note: When you open Camera from the Lock screen, you can view and edit photos and videos you take while the device is locked by tapping the thumbnail at the lower-left corner of the screen. To share photos and videos, first unlock iPhone. With iPhone, you can take both still photos and HD videos. And, theres two camerasin addition to the iSight camera on the back, theres a FaceTime camera on the front for FaceTime calls and self-portraits. The LED flash provides extra light when you need iteven as a flashlight, just a swipe away in Control Center. See Control Center on page 29. Set LED flash mode. Turn on HDR. Switch between cameras. Take a photo. Filter View the photos and videos youve taken. Take photos and videos Camera offers several photo and video modes, which let you shoot stills, square-format photos, panoramas, time-lapse, videos, and slow-motion videos (iPhone 5s or later). Choose a mode. Drag the screen left or right to choose Time-Lapse, Slo-Mo, Video, Photo, Square, or Pano. Take a photo. Choose Photo, then tap the shutter button or press either volume button. Take rapid-fire shots: (iPhone 5s or later ) Touch and hold the shutter button to take photos in bursts (available while in Square or Photo mode). The shutter sound is different, and the counter shows how many shots youve taken, until you lift your finger. To see the suggested shots and select the photos you want to keep, tap the thumbnail, then tap Select. The gray dot(s) mark the suggested photos. To copy a photo from the burst as a separate photo in your Bursts album in Photos, tap the circle in the lower-right corner of the photo. To delete the burst of photos, tap it, then tap

. Chapter 12 Camera 86 Turn on HDR.View the photos and videos youve taken.Switch between cameras.FilterTake a photo.Set LEDflash mode.Draft APPLE CONFIDENTIAL Apply a filter: Tap to apply different color effects, such as Mono or Chrome. To turn off a filter, tap photos and trim videos on page 82.

, then tap None. You can also apply a filter later, when you edit the photo. See Edit A rectangle briefly appears where the exposure is set. When you photograph people, face detection (iPhone 4s or later) balances the exposure across up to 10 faces. A rectangle appears for each face detected. Exposure is automatic, but you can set the exposure manually for the next shot by tapping an object or area on the screen. With an iSight camera, tapping the screen sets the focus and the exposure, and face detection is temporarily turned off. To lock the exposure and focus, touch and hold until the rectangle pulses. Take as many photos as you want. When you tap the screen again, the automatic settings and face detection turn back on. Tweak the automatic exposure. Touch and hold or down to adjust the exposure. Take a panorama photo. (iSight camera) Choose Pano, tap the shutter button, then pan slowly in the direction of the arrow. To pan in the other direction, first tap the arrow. To pan vertically, first rotate iPhone to landscape orientation. You can reverse the direction of a vertical pan, too. next to the exposure rectangle, then slide up Capture an experience with time-lapse. (iSight camera) Choose Time-Lapse, set up iPhone where you want, then tap the shutter button to start capturing a sunset, a flower opening, and other experiences over a period of time. Tap the shutter button again to stop. The time-lapse photos are compiled into a short video that you can watch and share. Shoot some video. Choose Video, then tap the shutter button to start and stop recording. Video records at 30 FPS (frames per second), but you can switch it to 60 FPS in Settings > Photos &

Camera. Snap a still while recording: (iPhone 5 or later) Tap the shutter button in the lower-left corner. Take it slow: (iPhone 5s or later) Choose Slo-Mo to shoot slow motion video. You can set which section to play back in slow motion when you edit the video. Chapter 12 Camera 87 Draft APPLE CONFIDENTIAL Set the slow-motion section of a video. Tap the thumbnail, then use the vertical bars beneath the frame viewer to set the section you want to play back in slow motion. Slide to adjust the slow-motion section of the video. Zoom in or out. (iSight camera) Pinch open or closed on the image on the screen. For iPhone 5 or later, zoom works in video mode as well as photo mode. If Location Services is turned on, photos and videos are tagged with location data that can be used by apps and photo-sharing websites. See Privacy on page 37. Use the capture timer to put yourself in the shot. Avoid shutter shake or add yourself to a picture by using the capture timer. To include yourself, first set iPhone on a stable surface and frame your shot. Tap Want to capture whats displayed on your screen? Simultaneously press and release the Sleep/

Wake and Home buttons. The screenshot is added to the Recently Added album in Photos. Make it better. You can edit photos and trim videos, right on iPhone. See Edit photos and trim videos on page 82.

, tap 3s (seconds) or 10s, then tap the shutter button. HDR HDR (High Dynamic Range) helps you get great shots, even in high-contrast situations. The best parts of three quick shots, taken at different exposures (long, normal, and short), are blended together into a single photo. Use HDR. (iSight cameras and the FaceTime camera on iPhone 5s or later) Tap the HDR button at the top of the screen. For best results, keep both iPhone and the subject still. (The flash is turned off for HDR shots.) On iPhone 5s or later, you can choose HDR Auto, and iPhone will use HDR when its most effective. Keep the normal photo in addition to the HDR version. Go to Settings > Photos & Camera >

Keep Normal Photo. Both the normal and HDR versions of the photo appear in Photos. HDR versions of photos in your albums are marked with HDR in the corner. View, share, and print Photos and videos you take are saved in Photos. With My Photo Stream or iCloud Photo Library turned on, new photos also appear in Shared on iPhone and your other iOS devices and computers. See iCloud Photo Library and My Photo Stream on page 80. View your photos. Tap the thumbnail image, then swipe left or right to see the photos youve taken recently. Tap All Photos to see everything in the Photos app. Tap the screen to show or hide the controls. Get sharing and printing options. Tap Upload photos and videos to your computer. Connect iPhone to your computer to upload items to iPhoto or another supported app on your Mac or PC. Sync photos and videos to iPhone from your Mac. Use the Photos settings pane in iTunes. See Sync with iTunes on page 17.

. See Share from apps on page 31. Chapter 12 Camera 88 Slide to adjust the slow-motion section of the video.Draft APPLE CONFIDENTIAL Camera settings Go to Settings > Photos & Camera for camera options, which include:

Photo stream and sharing Burst photos Slideshow Grid HDR Adjust the volume of the shutter sound with the Ringer and Alerts settings in Settings > Sounds. Or mute the sound using the Ring/Silent switch. (In some countries, muting is disabled.) Chapter 12 Camera 89 Draft APPLE CONFIDENTIAL Weather 13 Get the current temperature and ten-day forecast for one or more cities around the world, with hourly forecasts for the next 12 hours. Weather uses Location Services to get the forecast for your current location. Current conditions Current temperature Current hourly forecast Add or delete cities. Number of cities stored Swipe up to see your detailed forecast. Swipe left or right to see weather for another city, or tap and choose a city from the list. The leftmost screen shows your local weather.

.

. Enter a city or zip code, then tap Search. Add a city or make other changes. Tap Add a city: Tap Rearrange the order of cities: Touch and hold a city, then drag it up or down. Delete a city: Slide the city to the left, then tap Delete. Choose Fahrenheit or Celsius: Tap F or C. 90 Current conditionsAdd or delete cities.Current temperatureCurrent hourly forecastNumber of cities storedDraft APPLE CONFIDENTIAL View the current hourly forecast. Swipe the hourly display left or right.

. See all cities at once. Pinch the screen or tap Turn local weather on or off. Go to Settings > Privacy > Location Services. See Privacy on page 37. Use iCloud to push your list of cities to your other iOS devices. Go to Settings > iCloud >

Documents & Data, and make sure Documents & Data is on (its on by default). See iCloud on page 15. Chapter 13 Weather 91 Draft APPLE CONFIDENTIAL Clock 14 Clock at a glance The first clock displays the time based on your location when you set up iPhone. Add other clocks to show the time in other major cities and time zones. Delete clocks or change their order. Add a clock. View clocks, set an alarm, time an event, or set a timer. 92 Delete clocks or change their order.Add a clock.View clocks, set an alarm, time an event, or set a timer.Draft APPLE CONFIDENTIAL Alarms and timers Want iPhone to wake you? Tap Alarm, then tap then give the alarm a name (like Good morning). Tap to change options or delete an alarm.

. Set your wake-up time and other options, Turn saved alarms on or off. No wasting time! You can also use the stopwatch to keep time, record lap times, or set a timer to alert you when times up. If youre soft boiling an egg, just tell Siri to Set the timer for 3 minutes. Want to fall asleep to music or a podcast? Tap Timer, then tap When Timer Ends and choose Stop Playing at the bottom. Get quick access to clock features. Swipe up from the bottom edge of the screen to open Control Center, then tap

. You can access alarms in Control Center even when iPhone is locked. Chapter 14 Clock 93 Tap to change options or delete an alarm.Turn saved alarms on or off.Draft APPLE CONFIDENTIAL Maps 15 Find places WARNING: For important information about navigating safely and avoiding distraction while driving, see Important safety information on page 170. Get directions. Enter a search. Get more info. Tap a pin to display the pop-up banner. Current location Quick driving directions Choose the view, drop a pin, or show traffic. Show your current location. Important: Maps, directions, Flyover, and location-based apps depend on data services. These data services are subject to change and may not be available in all areas, resulting in maps, directions, Flyover, or location-based information that may be unavailable, inaccurate, or incomplete. Some Maps features require Location Services. See Privacy on page 37. Move around Maps by dragging the screen. To face a different direction, rotate with two fingers. To return to north, tap the compass Zoom in or out. Double-tap with one finger to zoom in and tap with two fingers to zoom outor use a pinching motion to zoom in or out. The scale appears in the upper-left while zooming, or if you touch the screen with two fingers. To change how distance is shown (miles or kilometers), go to Settings > Maps. Search for a location. Tap the search field, then enter a search. Maps may also list recent locations, searches, or directions that you can choose from. in the upper-right. 94 Choose the view, drop a pin, orshow traffic.Tap a pin to display the pop-up banner.Quick driving directionsGet more info.Current locationEnter a search.Show yourcurrent location.Get directions.Draft APPLE CONFIDENTIAL You can search for a location in lots of different ways:

Intersection (8th and market) Area (greenwich village) Landmark (guggenheim) Zip code Business (movies, restaurants san francisco ca, apple inc new york) Or if Maps guesses where youre headed while youre entering a search, tap that location in the list below the search field. Find the location of a contact, or of a favorite or recent search. Tap Favorites.. Choose your view. Tap Manually mark a location. Touch and hold the map until the dropped pin appears.

, then choose Standard, Hybrid, or Satellite. Get more info Get info about a location. Tap a pin to display its banner, then tap reviews and photos, a phone number (tap to call it), a webpage link, directions, and more. To share the location, add the location to your Favorites, or use another app you install, tap

. Info might include Yelp

.

, enter the starting and ending locations, then tap Route. Or choose a Get directions Note: To get directions, iPhone must be connected to the Internet. To get directions involving your current location, Location Services must also be on. Get directions. Tap location or a route from the list, if available. Tap to select driving or walking directions, or to use an app for public or other modes of transportation such as Uber. If a location banner is showing, directions to that location from your current location appear. To get other directions, tap the search field. If multiple routes appear, tap the one you want to take. Hear turn-by-turn directions: (iPhone 4s or later) Tap Start. Maps follows your progress and speaks turn-by-turn directions to your destination. To show or hide the controls, tap the screen. If iPhone auto-locks, Maps stays onscreen and continues to announce instructions. You can also open another app and continue to get turn-by-turn directions. To return to Maps, tap the banner across the top of the screen. With turn-by-turn directions, night mode automatically adjusts the screen image for easier viewing at night. See the route overview: Tap Overview. View the directions as a list: Tap List Steps. Stop turn-by-turn directions: Tap End. Or ask Siri to stop navigating. Get directions from your current location. Tap select driving or walking directions, or to use an app for public or other modes of transportation. on the banner of your destination. Tap to Chapter 15 Maps 95 Draft APPLE CONFIDENTIAL Use Maps on your Mac to get directions. Open Maps on your Mac (OS X Mavericks or later), get directions for your trip, then choose File > Share > Send to your device. Your Mac and iPhone must both be signed in to iCloud using the same Apple ID. Find out about traffic conditions. Tap and red dots show stop-and-go traffic. To see an incident report, tap a marker. Report a problem. Tap

, then tap Show Traffic. Orange dots show slowdowns,

, then tap Report a Problem. 3D and Flyover On iPhone 4s or later, you can see three-dimensional views and even fly over many of the worlds major cities. The Transamerica Pyramid Building is a registered service mark of Transamerica Corporation.

, then tap Show 3D Map. Or, drag two fingers up. View 3D map. Tap Adjust the camera angle. Drag two fingers up or down. Take a Flyover Tour. An aerial tour is available for select cities. In Hybrid view (tap

, then tap Hybrid), tap the name of a city that appears in yellow, then tap the Tour button on the location banner. Maps settings Go to Settings > Map. Settings include:

Navigation voice volume (iPhone 4s or later) Distances in miles or kilometers Map labels always appear in the language specified in Settings > General > International >

Language Chapter 15 Maps 96 The Transamerica Pyramid Building is a registered service mark of Transamerica Corporation.Draft APPLE CONFIDENTIAL Videos 16 Videos at a glance Open the Videos app to watch movies, TV shows, and music videos. To watch video podcasts, install the free Podcasts app from the App Storesee Podcasts at a glance on page 123. To watch videos you record using Camera on iPhone, open the Photos app. Add to your library. Delete videos from your library. Tap a video to play it. This means the video hasnt been downloaded. Choose a category. WARNING: For important information about avoiding hearing loss, see Important safety information on page 170. appears on a video thumbnail, you can watch it without Watch a video. Tap the video in the list of videos. What about videos you shot with iPhone? Open the Photos app. Stream or download? If downloading it to iPhone, if you have an Internet connection. To download the video to iPhone so you can watch without using a Wi-Fi or cellular connection, tap Looking for podcasts or iTunes U videos? Download the free Podcasts app or iTunes U app from the App Store. Set a sleep timer. Open the Clock app and tap Timer, then swipe to set the number of hours and minutes. Tap When Timer Ends and choose Stop Playing, tap Set, then tap Start. in the video details. 97 Choose a category.Delete videos from your library.Add to your library.Tap a video to play it.This means the video hasnt been downloaded.Draft APPLE CONFIDENTIAL Add videos to your library Buy or rent videos on the iTunes Store. Tap Store in the Videos app, or open the iTunes Store app on iPhone and tap Videos. See Chapter 22, iTunes Store, on page 111. Videos you purchase using your iTunes account are available in Videos on iPhone, no matter which iOS device or computer you use to purchase them. The iTunes Store is not available in all areas. Transfer videos from your computer. Connect iPhone, then sync videos from iTunes on your computer. See Sync with iTunes on page 17. Stream videos from your computer. Turn on Home Sharing in iTunes on your computer. Then, on iPhone, go to Settings > Videos and enter the Apple ID and password you used to set up Home Sharing on your computer. Then open Videos on iPhone and tap Shared at the top of the list of videos. Convert a video to work with iPhone. If you try to sync a video from iTunes to iPhone and a message says the video cant play on iPhone, you can convert the video. Select the video in your iTunes library and choose File > Create New Version > Create iPod or iPhone Version. Then sync the converted video to iPhone. Delete a video. Tap Edit in the upper right of your collection. To delete an individual episode of a series, swipe left on the episode in the Episodes list. Deleting a video (other than a rented movie) from iPhone doesnt delete it from the iTunes library on your computer, and you can sync the video back to iPhone later. If you dont want to sync the video back to iPhone, set iTunes to not sync the video. See Sync with iTunes on page 17. Important: If you delete a rented movie from iPhone, its deleted permanently and cannot be transferred back to your computer. Control playback Drag to skip forward or back. Tap to show or hide the controls. Drag to adjust the volume. Watch on a TV with Apple TV. or Scale the video to fill the screen or fit to the screen. Tap

. Or double-tap the video, to scale without showing the controls. If you dont see the scaling controls, your video already fits the screen perfectly. Start over from the beginning. If the video contains chapters, drag the playhead along the scrubber bar all the way to the left. If there are no chapters, tap Skip to the next or previous chapter. Tap

. You can also press the center button or equivalent on a compatible headset two times (skip to next) or three times (skip to previous). Rewind or fast-forward. Touch and hold Select a different audio language. If the video offers other languages, tap language from the Audio list.

, then choose a or or

.

. Chapter 16 Videos 98 Watch on a TV with Apple TV.Tap to show or hide the controls.Drag to skipforward or back.Drag to adjustthe volume.Draft APPLE CONFIDENTIAL Show subtitles or closed captions. Tap

. Not all videos offer subtitles or closed captions. Customize the appearance of closed captions. Go to Settings > General > Accessibility >

Subtitles & Captioning. Want to see closed captions and subtitles for the deaf and hard of hearing? Go to Settings >

General > Accessibility > Subtitles & Captioning and turn on Closed Captions + SDH. Watch the video on a TV. Tap AirPlay on page 35.

. For more about AirPlay and other ways to connect, see Videos settings Go to Settings > Videos, where you can:

Choose where to resume playback Choose to show only videos on iPhone Log in to Home Sharing Chapter 16 Videos 99 Draft APPLE CONFIDENTIAL Notes 17 Notes at a glance Type notes on iPhone, and iCloud automatically makes them available on your other iOS devices and Mac computers. You can also read and create notes in other accounts, such as Gmail or Yahoo!. Tap to edit. Write a new note. Share or print. Delete this note. See your notes on your other devices. If you use an icloud.com, me.com, or mac.com email address for iCloud, go to Settings > iCloud and turn on Notes. If you use Gmail or another IMAP account for iCloud, go to Settings > Mail, Contacts, Calendars and turn on Notes for the account. Your notes appear on all your other iOS devices and Mac computers that use the same Apple ID. Delete a note. Swipe left over the note in the list of notes. Search for a note. Scroll to the top of a list of notes (or tap the top of the screen) to reveal the search field, then tap the field and type what youre looking for. You can also search for notes from the Home screenjust drag down the middle of the screen. Share or print. Tap

(iPhone 5 or later). at the bottom of the note. You can share via Messages, Mail, or AirDrop 100 Tap to edit.Write a new note.Share or print.Delete this note. Draft APPLE CONFIDENTIAL Use notes in multiple accounts Share notes with other accounts. You can share notes with other accounts, such as Google, Yahoo!, or AOL. Go to Settings > Mail, Contacts, Calendars and turn on Notes for the account. To create a note in a specific account, tap Accounts at the top of a list of notes, select the account, then tap New. Notes you create in the account on iPhone show up in the notes folder of the account. Choose the default account for new notes. Go to Settings > Notes. See all notes in an account. Tap Accounts at the top of a list of notes, then choose the account. Chapter 17 Notes 101 Draft APPLE CONFIDENTIAL Reminders 18 Reminders lets you keep track of all the things you need to do. Scheduled items Add a list. Completed item Add a reminder. Tap a list, then tap a blank line. Share a list. Tap a list, then tap Edit. Tap Sharing, then tap Add Person. The people you share with need an iCloud account. After they accept your invitation to share the list, youll all be able to add, delete, and mark items as completed. Family members can also share a list. See Family Sharing on page 32. Delete a list. While viewing a list, tap Edit, then tap Delete List. Change or delete a reminder. Swipe the reminder left, then tap Delete. Change the order of lists. Touch and hold the list name, then drag the list to a new location. To change the order of items in a list, tap Edit. What list was that in? Scroll to the top to see the search field. All lists are searched, by the reminder name. You can also use Siri to find reminders. For example, say Find the reminder about milk. Dont bother me now. You can turn off Reminder notifications in Settings > Notification Center. To silence them temporarily, turn on Do Not Disturb. With OS X Yosemite, you can handoff Reminders youre editing between your Mac and iPhone. See Using continuity features on page 22. 102 Add a list.Completed itemScheduled itemsDraft APPLE CONFIDENTIAL Scheduled reminders Scheduled reminders notify you when theyre due. Scheduled reminder

, then turn on Remind me on a Schedule a reminder. While editing a reminder, tap day. Tap Alarm to set the date and time. Tap Repeat to schedule the reminder for regularly occurring intervals. See all scheduled reminders. Tap Dont bother me now. You can turn off Reminder notifications in Settings > Notifications. To silence notifications temporarily, turn on Do Not Disturb. to show the Scheduled list. Location reminders Find an address. Adjust the geofence. Be reminded when you arrive or leave a location. While editing a reminder, tap

, then turn on Remind me at a location. Tap Location, then choose a location from the list, or enter an address. After you define a location, you can drag to change the size of the geofence on the map, which sets the approximate distance at which you want to be reminded. You cant save a location reminder in Outlook or Microsoft Exchange calendars. Add common locations to your address card. When you set a location reminder, locations in the list include addresses from your personal info card in Contacts. Add your work, home, and other favorite addresses to your card for easy access in Reminders. Reminders settings Go to Settings > Reminders, where you can:

Set a default list for new reminders Sync past reminders Keep your reminders up to date on other devices. Go to Settings > iCloud and turn on Reminders. To keep up to date with Reminders on OS X, turn on iCloud on your Mac too. Some other types of accounts, such as Exchange, also support Reminders. Go to Settings > Mail, Contacts, Calendars and turn on Reminders for the accounts you want to use. Chapter 18 Reminders 103 Scheduled reminderAdjust the geofence.Find an address.Draft APPLE CONFIDENTIAL Stocks 19 Keep track of the major exchanges and your stock portfolio, see the change in value over time, and get news about the companies youre watching. Tap to see percent change. Tap again to see market capitalization. Swipe left or right to see stats or news articles.

. Manage your stock list. Tap Add an item: Tap Delete an item: Tap Rearrange the order of items: Drag

. up or down.

. Enter a symbol, company name, fund name, or index, then tap Search. While viewing stock info, you can tap any of the values along the right side of the screen to switch the display to price change, market capitalization, or percentage change. Swipe the info beneath the stock list to see the summary, chart, or news for the selected stock. Tap a news headline to view the article in Safari. You can also see your stocks in the Today tab of Notification Center. See Notification Center on page 30. Note: Quotes may be delayed 20 minutes or more, depending upon the reporting service. Add a news article to your reading list. Touch and hold the news headline, then tap Add to Reading List. Find out more. Tap YAHOO!

View a full-screen chart. Rotate iPhone to landscape orientation. Swipe left or right to see your other stock charts. 104 Tap to see percent change. Tap again to see market capitalization.Swipe left or right to see stats or news articles.Draft APPLE CONFIDENTIAL See the value for a specific date or time: Touch the chart with one finger. See the difference in value over time: Touch the chart with two fingers. Use iCloud to keep your stock list up to date on your iOS devices. Go to Settings > iCloud >

Documents & Data, then turn on Documents & Data (its on by default). See iCloud on page 15. Chapter 19 Stocks 105 Draft APPLE CONFIDENTIAL Game Center 20 Game Center at a glance Game Center lets you play your favorite games with friends who have an iOS device or a Mac

(OS X Mountain Lion or later). You must be connected to the Internet to use Game Center. WARNING: For important information about avoiding repetitive motion injuries, see Important safety information on page 170. Play, share, or remove this game. See whos the best. Find someone to play against. Explore game goals. Choose a game. Its on!

Is it your turn?

Invite friends to play. Declare your status or change your photo. Get started. Open Game Center. If you see your nickname at the top of the screen, youre already signed in. Otherwise, youll be asked for your Apple ID and password. Get some games. Tap Games, then tap a recommended game, browse for games in the App Store, or get a game one of your friends has (see Play games with friends on page 107). Play! Tap Games, choose a game, tap Sign out? No need to sign out when you quit Game Center, but if you want to, go to Settings >

Game Center and tap your Apple ID. in the upper right, then tap Play. 106 Declare your status or change your photo.See whos the best.Choose a game.Its on!Is it your turn?Play, share, or remove this game.Find someone to play against.Explore game goals.Invite friends to play.Draft APPLE CONFIDENTIAL

, then enter your friends email address or Game Center

. (To add several friends in one request, type Return Play games with friends Invite friends to a multiplayer game. Tap Friends, choose a friend, choose a game, then tap Play. If the game allows or requires more players, choose the players, then tap Next. Send your invitation, then wait for the others to accept. When everyones ready, start the game. If a friend isnt available or doesnt respond, you can tap Auto-Match to have Game Center find another player for you, or tap Invite Friend to invite someone else. Send a friend request. Tap Friends, tap nickname. To browse your contacts, tap after each address.) Or, tap any player you see anywhere in Game Center. Challenge someone to outdo you. Tap one of your scores or achievements, then tap Challenge Friends. What are your friends playing and how are they doing? Tap Friends, tap your friends name, then tap the Games or Points bubble. Want to purchase a game your friend has? Tap Friends, then tap your friends name. Tap the game in your friends game list, then tap Make new friends. To see a list of your friends friends, tap Friends, tap your friends name, then tap their Friends bubble. Unfriend a friend. Tap Friends, tap the friends name, then tap Keep your email address private. Turn off Public Profile in your Game Center account settings. See Game Center settings on page 107 below. Turn off multiplayer activity or friend requests. Go to Settings > General > Restrictions. If the switches are grayed, first tap Enable Restrictions at the top. Keep it friendly. To report offensive or inappropriate behavior, tap Friends, tap the persons name, tap in the upper right, then tap Report a Problem. in the upper right. in the upper right. Game Center settings Go to Settings > Game Center, where you can:

Sign out (tap your Apple ID) Allow invites Let nearby players find you Edit your Game Center profile (tap your nickname) Get friend recommendations from Contacts or Facebook Specify which notifications you want for Game Center. Go to Settings > Notification Center >

Game Center. If Game Center doesnt appear, turn on Notifications. Change restrictions for Game Center. Go to Settings > General > Restrictions. Chapter 20 Game Center 107 Draft

 

 

APPLE CONFIDENTIAL Passbook 21 Passbook at a glance Use Passbook to keep your boarding passes, movie tickets, coupons, loyalty cards, and more, all in one place. Scan a pass on iPhone to check in for a flight, get in to a movie, or redeem a coupon. Passes can include useful information, such as the balance on your coffee card, a coupons expiration date, or your seat number for a concert. With N56/N61, you can add your credit and debit cards to Passbook and use them to pay in stores accepting contactless payments and in supported apps. See Stockholm on page 109.

, then tap Scan Code. Point your iPhone at the Passbook on the go Find apps that support Passbook. Tap Apps for Passbook on the Welcome pass. Or, on your computer, see www.itunes.com/passbookapps. You can add a pass from an app, an email or Messages message, or a website when you make a purchase or receive a coupon or gift. Usually, you tap or click the pass or the link to a pass to add it to Passbook. You can also scan codes from merchants ads or receipts, which are downloaded to Passbook. Scan a code. Pull down your pass stack, tap code and frame it to add the pass. Use a pass. If an alert for a pass appears on the Lock screen, slide the alert to display the pass. Or open Passbook, select the pass, then present the barcode on the pass to the scanner. Share a pass. You can share a pass using Mail, Messages, or AirDrop (iPhone 5 or later). See Share from apps on page 31. Display a pass based on location. A pass can appear on the Lock screen when you wake iPhone at the right time or placefor example, when you reach the airport for a flight youre taking. Location Services must be turned on in Settings > Privacy > Location Services. Rearrange passes. Drag a pass in the stack to move it to a new location. The pass order is updated on all your iOS 7 or later devices. Refresh a pass. Passes are usually updated automatically. To refresh a pass manually, tap the pass, tap Use iTunes Pass. You can use the iTunes Pass in Passbook to make purchases in iTunes Store, App Store, and iBooks Store. To add the iTunes Pass, use your Apple ID account settings page, which you get to from Settings > iTunes & App Store (tap your Apple ID, then tap View Apple ID). You can add money to your iTunes Pass at Apple Retail Stores in most countries.

, then pull the pass downward. Note: iTunes Pass is not available in all areas. 108 Draft APPLE CONFIDENTIAL Done with a pass? Tap the pass, tap

, then tap Delete. Stockholm With N56/N61 iPhone signed into iCloud, you can use the Stockholm payment feature. Keep up to eight credit and debit cards available for making purchases in stores using contactless payments, and in apps that support Stockholm (apps that sell physical goods and services such as apparel, electronics, health and beauty products, tickets, reservations and more). You can add a payment card to Passbook when you set up your N56/N61 iPhone, or you can do it later in Passbook. Cards you add on one iOS device can be added to your other supported devices just by entering the cards security code. Credit cards and debit cards appear at the top of your Passbook stack, with passes beneath. The front of a card displays the last four digits of the credit or debit card number, and the back shows the last four digits of the Device Account Numberthe number transmitted to stores and apps for the purchase. You can view recent Stockholm activity on the back of your card in Passbook, as well as on your credit and debit card statements.

, then tap Set Up Stockholm Add a credit card or debit card. Pull down your pass stack, tap

(or Add Another Card, after youve added the first one). If you have a credit or debit card on file in iTunes, youre prompted to add it to Passbook. Or you can add a different card and follow the prompts to add the necessary information (name on card, card number, expiration date, and security code). The issuing bank will determine if your card is eligible to be added, and you might be asked to provide additional information to complete the verification process. Note: Most U.S. credit and debit cards are able to be added to Passbook, with frequent updates. Check <link to kbase article> for the latest list of supported banks. Tap to add payment information

(N56/N61). Tap to scan a code. Open the App Store to download supported apps. Set your default card. The card at the top of your stack is the default card that can be used when you pay at a reader. When you add a new card, it's added to the bottom of the stack. Just drag your cards to a new position in the stack to reorder them. Chapter 21 Passbook 109 Tap to add payment information (N56/N61).Tap to scan a code.Open the App Store to download supported apps.Draft APPLE CONFIDENTIAL Pay at a contactless card reader. To pay with your default card, hold iPhone with your finger on the Touch ID sensor and move it close to the reader until iPhone vibrates. You see the card onscreen with a Done checkmark when the card information has been transmitted to the merchant. Or you can start by holding iPhone near a reader until the screen prompts you to use your Touch ID, then move the device near the reader again to pay. Image

"file:///svn/apd-projectfiles/Sweet/iPhone_iPod_touch/

content/branches/Okemo/iPhone/en.lproj//Art/

PASS_reader.ai"

not found. Use another card. Tap the card in the stack before presenting N56/61 iPhone to the reader. Pay in an app. When you make a purchase in an app, look for the Stockholm payment option. Tap Stockholm, then review the information that appears (for example, the card youre using for the purchase, email, and shipping method), and make any changes before purchasing. View your recent activity. Tap a card. Your most recent activity appears on the front. Tap view a list of your recent activity on the back of the card. Inactive card. If your card appears gray or inactive in the stack, contact the bank by calling the number on the back of your credit or debit card. Remove a card. Tap the card, tap If you lose your iPhone. Find My iPhone can help you locate and secure your iPhone if it is lost or stolen. See Find My iPhone on page 40.

, then tap Delete. to Passbook settings Keep passes from appearing on the Lock screen. Go to Settings > Touch ID & Passcode (iPhone models with Touch ID) or Settings > Passcode (other models), then tap Turn Passcode On. Then, under Allow Access When Locked, turn off Passbook. For passes with notifications, to keep a specific pass from appearing on the Lock screen, tap the pass, tap

, then turn off Show On Lock Screen. Set notification options. Go to Settings > Notification Center > Passbook. Include passes and cards (for Stockholm) on your other iOS devices. Go to Settings > iCloud and turn on Passbook. Chapter 21 Passbook 110 Draft APPLE CONFIDENTIAL iTunes Store 22 iTunes Store at a glance Use the iTunes Store to add music, movies, and TV shows to iPhone. View your recent history. Browse See downloads, purchases, tones, audiobooks, and more. Note: You need an Internet connection and an Apple ID to use the iTunes Store. The iTunes Store is not available in all areas. Browse or search Browse by genre. Tap one of the categories (Music, Movies, or TV Shows). Tap Genres to refine the list. Tap a genre to see more about it. 111 See downloads, purchases, tones, audiobooks,and more.View your recent history. BrowseTap a genre to see more about it.Draft APPLE CONFIDENTIAL If you know what youre looking for, tap Search. Enter info in the search field, then tap Search again. Access family members purchases. With Family Sharing turned on, you can view and download songs, TV shows, and movies purchased by other family members. Tap Purchased, tap your name or My Purchases in the upper left corner, then select a family member from the menu. Find it with Siri. Siri can search for items and make purchases in the iTunes Store. For example, you can say Get a new ring tone or Purchase song name by band name. You can ask Siri to download a podcast or redeem a gift card. For best results, say purchase instead of buy at the beginning of a Siri command. Ask Siri to tag it. When you hear music playing around you, ask Siri What song is playing? Siri tells you what the song is and gives you an easy way to purchase it. It also saves it to the Siri tab in the iTunes Store so you can buy it later. Tap Music, tap

, then tap Siri to see a list of tagged songs available for preview or purchase. Tap to see your Wish List and recommendations. Discover great new music on iTunes Radio. When you listen to iTunes Radio, songs you play appear on the Radio tab in iTunes Store so you can preview or purchase them. Tap Music, tap then tap Radio to see your favorite songs available to preview or purchase. Preview a song or video. Tap it. Add to your Wish List. When you hear something you hope to buy from iTunes Store, tap then tap Add to Wish List. To view your Wish List in iTunes Store, tap Music, Movies, or TV Shows, tap Tired of tapping More? To rearrange the buttons, tap More, then tap Edit. To replace an icon, drag another icon over the one you want to replace. Then tap Done.

, then tap Wish List.

,

, Chapter 22 iTunes Store 112 Tap to see your Wish List and recommendations.Draft APPLE CONFIDENTIAL instead of a price, youve Purchase, rent, or redeem Tap an items price (or tap Free), then tap again to buy it. If you see already purchased the item and you can download it again without a charge. Approve purchases with Family Sharing. With Family Sharing set up, the family organizer can review and approve purchases made by family members under the age of 18. For example, if Parent/Guardian > Ask to Buy is set for specific minor family members, when those members try to make a purchase, a message is sent to the family organizer for approval. For more information about setting up Family Sharing, see Family Sharing on page 32. Hide individual purchases. Using iTunes on a computer, the family organizer can hide purchases so other family members cant view or download them. For more information, see Family Sharing on page 32. Use a gift card or code. Tap a category (like Music), scroll to the bottom, then tap Redeem. Or tell Siri Redeem an iTunes Store gift card. Send a gift. View the item you want to give, tap

(Music, Movies, or TV Shows), scroll to the bottom, then tap Send Gift to send an iTunes gift certificate to someone. Use iTunes Pass. You can use the iTunes Pass in Passbook to make purchases in iTunes Store, App Store, and iBooks Store. To add the iTunes Pass, use your Apple ID account settings page, which you get to from Settings > iTunes & App Store (tap your Apple ID, then tap View Apple ID). You can add money to your iTunes Pass at Apple Retail Stores in most countries.

, then tap Gift. Or tap one of the categories Note: iTunes Pass is not available in all areas. See the progress of a download. Tap More, then tap Downloads. Bought something on another device? Go to Settings > iTunes & App Store to set up automatic downloads on your iPhone. You can always view your purchased music, movies, and TV shows in iTunes Store (tap More, then tap Purchased). Watch your time with rentals. In some areas, you can rent movies. You have 30 days to begin watching a rented movie. After you start watching it, you can play it as many times as you want in the allotted time (24 hours in the U.S. iTunes Store; 48 hours in other countries). Once your times up, the movie is deleted. Rentals cant be transferred to another device; however, you can use AirPlay and Apple TV to view a rental on your television. iTunes Store settings To set options for iTunes Store, go to Settings > iTunes & App Store. You can:

View or edit your account. Tap your Apple ID, then tap View Apple ID. To change your password, tap the Apple ID field. Sign in with a different Apple ID. Tap your account name, then tap Sign Out. You can then enter a different Apple ID. Subscribe to or turn on iTunes Match. You can subscribe to iTunes Match, a service that stores your music and more in iCloud. See iCloud and iTunes Match on page 67. If youre a subscriber, tap iTunes Match so you can access your music on iPhone anywhere. Tap Learn more for more information about iTunes Match. Turn on automatic downloads. Tap Music, Books, or Updates. Content updates automatically over Wi-Fi, unless you turn off the option in Automatic Downloads. Chapter 22 iTunes Store 113 Draft APPLE CONFIDENTIAL Download purchases over the cellular network. Turn on Use Cellular Data. Downloading purchases and using iTunes Match over the cellular network may incur carrier charges. Chapter 22 iTunes Store 114 Draft APPLE CONFIDENTIAL App Store 23 App Store at a glance Use the App Store to browse, purchase, and download apps to iPhone. See your Wish List and other suggestions for you. View purchases and updates. Browse Find apps being used nearby. Note: You need an Internet connection and an Apple ID to use the App Store. The App Store is not available in all areas. Find apps If you know what youre looking for, tap Search. Or tap Categories to browse by type of app. Ask Siri to find it. Siri can search for items and make purchases in the App Store. For example, Find apps by Apple or Install app name. For best results, use purchase instead of buy at the beginning of a Siri command. Access family members apps. With Family Sharing turned on, you can view and download apps purchased by other family members. Tap Purchased, tap your name or My Purchases in the upper left corner, then select a family member from the menu. Want to tell a friend about an app? Find the app, tap AirDrop on page 32. Use Wish List. To track an app you might want to purchase later, tap tap Add to Wish List.

, then choose the method. See on the app page, then 115 View purchases and updates.BrowseFind apps being used nearby.See your Wish List and other suggestionsfor you.Draft APPLE CONFIDENTIAL What apps are being used nearby? Tap Explore to find out the most popular apps others around you are using. (Location Services must be on in Settings > Privacy > Location Services.) Try this at a museum, sporting event, or when youre traveling, to dig deeper into your experience. Tap to download or purchase. Search apps by category. Tap Explore, scroll to Categories, then tap a category to focus on the apps you want, for example, Education, Medical, or Sports. Purchase, redeem, and download Tap the apps price, then tap Buy to purchase it. If its free, tap Free, then tap Install. instead of a price, youve already purchased the app and you can download it again If you see without charge. While the app is downloading or updating, its icon appears on the Home screen with a progress indicator. Approve purchases with Family Sharing. With Family Sharing set up, the family organizer can review and approve purchases made by other family members under the age of 18. For example, if Parent/Guardian > Ask to Buy is set for specific minor family members, when those members try to make a purchase, a message is sent to the family organizer for approval. For more information about setting up Family Sharing, see Family Sharing on page 32. Find out more about the requested app. Hide individual purchases. Using iTunes on a computer, the family organizer can hide purchases so other family members cant view or download them. For more information, see Family Sharing. Use a gift card or code. Tap Featured, scroll to the bottom, then tap Redeem. Or tell Siri Redeem an iTunes Store gift card. Chapter 23 App Store 116 Tap to download or purchase.Find out more about the requested app.Draft APPLE CONFIDENTIAL

, then tap Gift. Or tap Featured, scroll to the Send a gift. View the item you want to give, tap bottom, then tap Send Gift to send an iTunes gift certificate to someone. Use iTunes Pass. You can use the iTunes Pass in Passbook to make purchases in iTunes Store, App Store, and iBooks Store. To add the iTunes Pass, use your Apple ID account settings page, which you get to from Settings > iTunes & App Store (tap your Apple ID, then tap View Apple ID). You can add money to your iTunes Pass at Apple Retail Stores in most countries. Note: iTunes Pass is not available in all areas. Restrict in-app purchases. Many apps provide extra content or enhancements for a fee. To limit purchases that can be made from within an app, go to Settings > General > Restrictions (make sure Restrictions is enabled), and set options (for example, restrict by age rating or require a password immediately or every 15 minutes). You can turn off In-App Purchases to prevent all purchases. See Restrictions on page 37. Delete an app. Touch and hold the app icon on the Home screen until the icon jiggles, then tap

. When you finish, press the Home button. You cant delete built-in apps. Deleting an app also deletes its data. You can download any app youve purchased on the App Store again, free of charge. For information about erasing all of your apps, data, and settings, see Restart or reset iPhone on page 173. App Store settings To set options for App Store, go to Settings > iTunes & App Store. You can:

View or edit your account. Tap your Apple ID, then tap View Apple ID. To change your password, tap the Apple ID field. Sign in using a different Apple ID. Tap your account name, then tap Sign Out. Then enter the other Apple ID. Turn off automatic downloads. Tap Apps in Automatic Downloads. Apps update automatically over Wi-Fi, unless you turn off the option. Download apps using the cellular network. Turn on Use Cellular Data. Downloading apps over the cellular network may incur carrier charges. Newsstand apps update only over Wi-Fi. Chapter 23 App Store 117 Draft APPLE CONFIDENTIAL Voice Memos 24 Voice Memos at a glance Voice Memos lets you use iPhone as a portable recording device. Use it with the built-in microphone, an iPhone or Bluetooth headset mic, or a supported external microphone. Switch playback between receiver and speaker. Drag recording level to position play/record head. Trim the recording. Save the recording. Record, pause, or resume. Your recordings Listen before saving. Record or press the center button on your headset. Tap again to pause or resume. Record sound. Tap Recordings using the built-in microphone are mono, but you can record stereo using an external stereo microphone that works with the iPhone headset jack, or with the Lightning connector

(iPhone 5 or later) or 30-pin dock connector (iPhone 4s). Look for accessories marked with the Apple Made for iPhone or Works with iPhone logo. Adjust the recording level. Move the microphone closer to what youre recording. For better recording quality, the loudest level should be between 3 dB and 0 dB. Preview before saving. Tap the recording level display left or right. Record over a section. Drag the recording level display to position the record/play head, then tap to the left of the Record button. To position the play head, drag

. 118 Drag recording level to position play/record head.Record, pause, or resume.Trim the recording.Switch playback between receiver and speaker.Save the recording.Your recordingsListen before saving.Draft APPLE CONFIDENTIAL to check your edit. Adjust the trim

, then drag the red trim handles. Tap Trim the excess. Tap handles if necessary, then tap Trim when youre finished. Save the recording. Tap Done. Mute the start and stop tones. Use the iPhone volume buttons to turn the volume all the way down. Multitask. To use another app while youre recording, press the Home button and open the other app. To return to Voice Memos, tap the red bar at the top of the screen. Play it back Tap a recording to play or edit it. Drag to skip ahead or rewind. Trim or rename the recording. Listen to the recording. Rename a recording. Tap the name of the recording. Move recordings to your computer You can sync voice memos with the iTunes library on your computer, then listen to them on your computer or sync them with another iPhone or iPod touch. When you delete a synced voice memo from iTunes, it stays on the device where it was recorded, but is deleted from any other iPhone or iPod touch you synced. If you delete a synced voice memo on iPhone, its copied back to iPhone the next time you sync with iTunes, but you cant sync that copy back to iTunes a second time. Sync voice memos with iTunes. Connect iPhone to your computer, then in iTunes select iPhone. Select Music at the top of the screen (between Apps and Movies), select Sync Music, select Include voice memos, and click Apply. Voice memos synced from iPhone to your computer appear in the Music list and in the Voice Memos playlist in iTunes. Voice memos synced from your computer appear in the Voice Memos app on iPhone, but not in the Music app. Chapter 24 Voice Memos 119 Trim or rename the recording.Listen to the recording.Tap a recording to play or edit it.Drag to skip ahead or rewind.Draft APPLE CONFIDENTIAL FaceTime 25 FaceTime at a glance Use FaceTime to make video or audio calls to other iOS devices or computers that support FaceTime. The FaceTime camera lets you talk face-to-face; switch to the rear iSight camera (not available on all models) to share what you see around you. Note: FaceTime may not be available in all areas. Drag your image to any corner. Mute your mic (the caller can see but not hear you). Switch to the rear camera (available on some models). With a Wi-Fi connection and an Apple ID, you can make and receive FaceTime calls (first sign in using your Apple ID, or create a new account). On iPhone 4s or later, you can also make FaceTime calls over a cellular data connection, which may incur additional charges. To turn off this feature, go to Settings > Cellular. For more information about cellular usage and settings, see Cellular settings on page 176. Make and answer calls Make a FaceTime call. Make sure FaceTime is turned on in Settings > FaceTime. Tap FaceTime, then type the name or number you want to call in the entry field at the top. Tap to make a video call, or tap from there. to open Contacts and start your call to make an audio call. Or tap Tap an icon to start a FaceTime call. 120 Mute your mic (the caller can see but not hear you).Switch to the rear camera (available on some models).Drag your imageto any corner.Tap an icon to start a FaceTime call.Draft APPLE CONFIDENTIAL Use your voice to start the call. Press and hold the Home button, then say FaceTime, followed by the name of the person to call. Want to call again? Tap FaceTime to see your call history on the screen. Tap Audio or Video to refine your search, then tap a name or number to call again. Tap to open the name or number in Contacts. Swipe to the left, then tap Delete to delete the name or number from your call history. Cant take a call right now? When a FaceTime call comes in, you can answer, decline, or choose another option. Set up a reminder to return the call later. Send the caller a text message. See the whole gang. Rotate iPhone to use FaceTime in landscape orientation. To avoid unwanted orientation changes, lock iPhone in portrait orientation. See Change the screen orientation on page 22. Manage calls Multitask during a call. Press the Home button, then tap an app icon. You can still talk with your friend, but you cant see each other. To return to the video, tap the green bar at the top of the screen. Juggle calls. FaceTime calls arent forwarded. If another call comes in while youre on a FaceTime call, you can either end the first call and answer the incoming call, decline the incoming call, or reply with a text message. You can use call waiting with FaceTime audio calls only. Use call waiting for audio calls. If youre on a FaceTime audio call and another call comes in either a phone call or another FaceTime audio callyou can decline the call, end the first call and accept the new one, or put the first call on hold and respond to the new call. Add multiple callers. While on a FaceTime audio call or a phone call, you can add another person to the conversation. Put the first call on hold, then tap phone call. Block unwanted callers. Go to Settings > FaceTime > Blocked > Add New. You wont receive voice calls, FaceTime calls, or text messages from blocked callers. For more information about blocking calls, see support.apple.com/kb/HT5845. Other options in Settings let you turn FaceTime on or off, specify a phone number, Apple ID, or email address to use with FaceTime, and set your caller ID. to add another FaceTime audio or Chapter 25 FaceTime 121 Set up a reminder to return the call later.Send the caller a text message.Draft APPLE CONFIDENTIAL Newsstand 26 Newsstand at a glance Newsstand organizes your magazine and newspaper apps, and automatically updates them when iPhone is connected to Wi-Fi. Touch and hold a publication to rearrange. Find Newsstand apps. Find Newsstand apps. Tap Newsstand to reveal the shelf, then tap Store. When you purchase a Newsstand app, its added to the shelf. After the app is downloaded, open it to view its issues and subscription options. Subscriptions are In-App purchases, billed to your store account. Turn off automatic updates. Apps update automatically over Wi-Fi, unless you turn off the option in Settings > iTunes & App Store > Automatic Downloads. 122 Touch and hold a publication to rearrange.Find Newsstand apps.Draft APPLE CONFIDENTIAL Podcasts 27 Podcasts at a glance Open the Podcasts app, then browse, subscribe to, and play your favorite audio or video podcasts on iPhone. Delete or rearrange podcasts. Tap a podcast to view and play episodes. New episodes Browse for podcasts. Organize and automatically update your favorites. See your subscriptions and downloaded podcasts. Get podcasts and episodes Discover more podcasts. Tap Featured or Top Charts at the bottom of the screen. Search for new podcasts. Tap Search at the bottom of the screen. Search your library. Tap My Podcasts, then swipe down in the center of the screen to reveal the Search field. 123 See your subscriptionsand downloaded podcasts.Delete or rearrange podcasts. Tap a podcast to view and play episodes.Organize and automatically update your favorites.Browse for podcasts.New episodesDraft APPLE CONFIDENTIAL Preview or stream an episode. Tap the podcast, then tap an episode. View unplayed episodes. View available episodes. Pull down to see Edit, Settings, and Share options. to get episode details. Tap any link in podcast or episode descriptions to Get more info. Tap open them in Safari. Find new episodes. Tap Unplayed to find episodes you havent yet heard. Browse episodes. Tap Feed to see episodes available to download or stream. Download an episode to iPhone. Tap Get new episodes as theyre released. Subscribe to the podcast. If youre browsing Featured podcasts or Top Charts, tap the podcast, then tap Subscribe. If youve already downloaded episodes, tap My Podcasts, tap the podcast, tap Settings at the top of the episode list, then turn on Subscription. Save episodes. Tap saved episode. next to an episode, then tap Save Episode. Tap Delete Episode to delete a next to the episode. Control playback Tap to start over, or double-tap to go to the previous episode. See a list of episodes. Tap to see more info. Drag to skip forward or back. Skip to the next episode. Tap to speed up or slow down. Chapter 27 Podcasts 124 Pull down to see Edit, Settings, and Share options.View unplayed episodes.View available episodes.See a list of episodes.Tap to see more info.Drag to skip forward or back.Skip to the next episode.Tap to speed up or slow down.Tap to start over, or double-tap to go to the previous episode.Draft APPLE CONFIDENTIAL See podcast info while you listen. Tap the podcast image on the Now Playing screen. Use your voice. Tell Siri to play available podcast episodes, or specific podcasts or stations. For example, say Play podcasts or Play Freakonomics Radio. Organize your favorites into stations Delete or rearrange stations. Tap a station to choose episodes or change settings. Tap to play the latest episode. Organize selected podcasts and episodes into stations. Organize your favorite podcasts into custom stations, and update episodes automatically across all your devices. Pull together episodes from different podcasts. To add episodes to your On-The-Go station, tap My Stations, tap On-The-Go, then tap Add. Or tap next to any episode in your library. You can also touch and hold any episode, then tap Add to On-The-Go. Create a station. Tap My Stations, then tap Change the order of the station list or the podcasts in a station. Tap My Stations, tap Edit above the station list or the episode list, then drag Change the playback order for episodes in a station. Tap the station, then tap Settings. Rearrange your podcast library. Tap My Podcasts, tap list view in the upper right, tap Edit, then drag List oldest episodes first. Tap My Podcasts, tap a podcast, then tap Settings. Play podcasts from the station list. Tap next to the station name. up or down. up or down.

. Podcasts settings Go to Settings > Podcasts, where you can:

Choose to keep your podcast subscriptions up to date on all of your devices. Choose how frequently Podcasts checks your subscriptions for new episodes. Have episodes downloaded automatically. Choose whether to keep episodes after you finish them. Chapter 27 Podcasts 125 Organize selected podcasts and episodes into stations.Tap a station to choose episodes or change settings.Tap to play the latest episode.Delete or rearrange stations.Draft APPLE CONFIDENTIAL Health 28 Your health at a glance Use the Health app to keep track of your health and fitness information. Enter data for key parameters, or let the Health app collect data from other apps and devices that monitor your health and activity. You can even share specific data with selected apps, and through apps with some health care providers. And, Health can display important contact and medical information on the iPhone Lock screen for someone attending to you in an emergency. Tap any item to see details. Make emergency medical info viewable on your Lock screen. Connect devices that update your exercise or medical status. See all available data, control data sharing, or add to the Dashboard. View selected health and fitness data. Collect health and fitness data Enter your own data. If the parameter is in your Dashboard, just tap it there, then tap Add Data Point. Otherwise, tap Health Data at the bottom of the screen, tap the parameter you want to update, then tap Add Data Point. 126 Tap any item to see details.Make emergency medical info viewable on your Lock screen.See all available data, control data sharing, or add to the Dashboard.Connect devices that update your exercise or medical status.View selected health and fitness data.Draft APPLE CONFIDENTIAL Collect data from a device. Follow the instructions that can come with the device to set it up. If its a Bluetooth device, youll need to pair it with iPhonesee Bluetooth devices on page 36. Collect data from an app. Follow the instructions that can come with the app to set it up, then watch for a sharing request where you control whether data is shared with the Health app. Stop app data collection. Tap Sources at the bottom of the Health screen, then select the app in the Apps list. Or tap the associated parameter in your Dashboard or in the Health Data list, tap Share Data, then choose the app under Data Providers. Share health and fitness data Enter your own data. If the parameter is in your Dashboard, just tap it there, then tap Add Data Point. Otherwise, tap Health Data at the bottom of the screen, tap the parameter you want to update, then tap Add Data Point. Share data. Follow the instructions that can come with the app or the device to set it up, then watch for a sharing request where you control whether data is shared by the Health app. For example, your health care provider might provide an app that sends blood pressure updates to your doctor. You need only install the app, then allow the Health app to share blood pressure data when prompted. Stop sharing data. Tap Sources at the bottom of the Health screen, then select the app in the Apps list. Or tap the associated parameter in your Dashboard or in the Health Data list, tap Share Data, then choose the app under Share Data With. Create an emergency medical ID Your iPhone can display important contact and medical information on the Lock screen, where its available for someone attending to you in an emergency. Note: Anyone with physical access to your iPhone can read the information you include in your emergency medical ID. Set up your medical ID. In the Health app, tap Medical ID in the bottom right of the screen. View your ID. When you wake iPhone, slide to the passcode screen, then tap Emergency. Prevent viewing. Tap Medical ID, tap Edit, then turn off Show Medical ID. Chapter 28 Health 127 Draft APPLE CONFIDENTIAL iBooks 29 Get books Get books from the iBooks Store. In iBooks, use the buttons at the bottom of the screen to access the iBooks Store. Tap Featured to browse the latest releases, or Top Charts to view the most popular. To find a specific book, tap Search. Read a book Contents, bookmarks, and notes Bookmark this page. Search in this book. Go to a page. Open a book. Tap the book you want to read. If you dont see it on the bookshelf, swipe left or right to see other collections. Show the controls. Tap near the center of a page. Not all books have the same controls, but some of the things you can do include searching, viewing the table of contents, and sharing what youre reading. Close a book. Tap Library, or pinch the page. Enlarge an image. Double-tap the image. In some books, touch and hold to display a magnifying glass you can use to view an image. Go to a specific page. Use the page navigation controls at the bottom of the screen. Or, tap and enter a page number, then tap the page number in the search results. 128 Go to a page.Bookmark this page.Contents, bookmarks, and notesSearch in this book.Draft APPLE CONFIDENTIAL

, then tap Bookmarks. You dont need to add a to add a bookmark, or tap again to remove it. You can have Get a definition. Double-tap a word, then tap Define in the menu that appears. Definitions arent available for all languages. Remember your place. Tap multiple bookmarksto see them all, tap bookmark when you close the book because iBooks remembers where you left off. Remember the good parts. Some books let you add highlights and notes. To add a highlight, touch and hold a word then move your finger to draw the highlight. To add a note, double-tap a word to select it, move the grab points to adjust the selection, then tap Note in the menu that appears. To see all the highlights and notes youve made, tap Share the good parts. Tap some highlighted text, then, in the menu that appears, tap

. If the book is from the iBooks Store, a link to the book is included automatically. (Sharing may not be available in all regions.) Share a link to a book. Tap near the center of a page to display the controls, then tap tap Change the way a book looks. Some books let you change the font, font size, and color of the page. (Tap

.) You can also change justification and hyphenation in Settings > iBooks. These settings apply to all books that support them.

, then tap Share Book.

, then tap Notes.

. Next, Brightness Page color Turn off pagination.

. If you dont see Change the brightness. Tap Dim the screen when its dark. Turn on Auto-Night Theme to automatically change the bookshelf, page color and brightness when using iBooks in low-light conditions. (Not all books support Auto-Night.)

, tap first. Chapter 29 iBooks 129 Page colorBrightnessTurn off pagination.Draft APPLE CONFIDENTIAL Organize books View collections. Sort the list. View on the iBooks Store

. or View books by title or by cover. Tap Organize your books with collections. Tap Select, then select some books to move them into a collection. To edit or create collections, tap the name of the current collection (at the top of the screen). Some built-in collections, such as PDFs, cant be renamed or deleted. Rearrange books. While viewing a collection by cover, touch and hold a cover, then drag it to a new location. While viewing books by title, sort the list using the buttons at the top of the screen. The All Books collection is automatically arranged for you; switch to another collection if you want to manually arrange your books. Search for a book. Pull down to reveal the Search field at the top of the screen. Searching looks for the title and the authors name. Hide purchased books you havent downloaded. Tap the name of the current collection (at the top of the screen), then turn on Hide iCloud Books. Read PDFs Sync a PDF. On a Mac, add the PDF to iBooks for OS X, then open iTunes, select the PDF, then sync. In iTunes on your Windows computer, choose File > Add to Library, select the PDF, then sync. See iTunes Help for more info about syncing. Add a PDF email attachment to iBooks. Open the email message, then touch and hold its PDF attachment. Choose Open in iBooks from the menu that appears. Print a PDF. With the PDF open, tap printer. For more about AirPrint, see AirPrint on page 35. Email a PDF. With the PDF open, tap

, then choose Print. Youll need an AirPrint-compatible

, then choose Email. iBooks settings Go to Settings > iBooks, where you can:

Sync collections and bookmarks (including notes and current page information) with your other devices. Display online content within a book. Some books might access video or audio thats stored on the web. Chapter 29 iBooks 130 Sort the list.View collections.View on the iBooks StoreDraft APPLE CONFIDENTIAL Change the direction pages turn when you tap in the left margin. Chapter 29 iBooks 131 Draft 30 APPLE CONFIDENTIAL Contacts Contacts at a glance Tap to view photo. Dial a number. Open in Messages. Open in Mail. Set your My Info card for Safari, Siri, and other apps. Go to Settings > Mail, Contacts, Calendars, then tap My Info and select the contact card with your name and information. Let Siri know whos who. On your contact card, use the related names fields to define relationships you want Siri to know about, so you can say things like send a message to my sister. Find a contact. Tap the search field at the top of the contacts list and enter your search. You can also search your contacts with Spotlight Search (see Search on page 28). Share a contact. Tap a contact, then tap Share Contact. See Share from apps on page 31. Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit. Then tap the label and choose one from the list, or tap Add Custom Label to create one of your own. Add your friends social profiles. While viewing a contact, tap Edit, then tap add social profile. You can add Twitter, Facebook, LinkedIn, Flickr, Myspace, and Sina Weibo accounts, or create a custom entry. Delete a contact. Go to the contacts card, then tap Edit. Scroll down, then tap Delete Contact. 132 Open in Mail.Dial a number.Open in Messages.Tap to view photo.Draft APPLE CONFIDENTIAL Use Contacts with Phone Prioritize your contacts. When you add someone to your Favorites list, their calls bypass Do Not Disturb and are added to your Favorites list in Phone for quick dialing. Choose a contact, then scroll down and tap Add to Favorites. Save the number you just dialed. In Phone, tap Keypad, enter a number, then tap Add to Contacts. Tap Create New Contact, or tap Add to Existing Contact and choose a contact. Add a recent caller to Contacts. In Phone, tap Recents, then tap Create New Contact, or tap Add to Existing Contact and choose a contact. Automate dialing an extension or passcode. If the number youre calling requires dialing an extension, iPhone can enter it for you. When editing a contacts phone number, tap to enter pauses in the dialing sequence. Tap Pause to enter a two-second pause, which is represented by a comma. Tap Wait to stop dialing until you tap Dial again, which is represented by a semicolon. next to the number. Then tap Add contacts Besides entering contacts, you can:

Use your iCloud contacts: Go to Settings > iCloud, then turn on Contacts. Import your Facebook Friends: Go to Settings > Facebook, then turn on Contacts in the Allow These Apps to Use Your Accounts list. This creates a Facebook group in Contacts. Use your Google contacts: Go to Settings > Mail, Contacts, Calendars, tap your Google account, then turn on Contacts. Access a Microsoft Exchange Global Address List: Go to Settings > Mail, Contacts, Calendars, tap your Exchange account, then turn on Contacts. Set up an LDAP or CardDAV account to access business or school directories: Go to Settings >

Mail, Contacts, Calendars > Add Account > Other. Then tap Add LDAP account or Add CardDAV account, then enter the account information. Sync contacts from your computer or Yahoo!: In iTunes on your computer, turn on contact syncing in the device info pane. For information, see iTunes Help. Import contacts from a SIM card (GSM): Go to Settings > Mail, Contacts, Calendars > Import SIM Contacts. Import contacts from a vCard: Tap a .vcf attachment in an email or message. Search a directory. Tap Groups, tap the GAL, CardDAV, or LDAP directory you want to search, then enter your search. To save a persons info to your contacts, tap Add Contact. Show or hide a group. Tap Groups, then select the groups you want to see. This button appears only if you have more than one source of contacts. Update your contacts using Twitter, Facebook, and Sina Weibo. Go to Settings > Twitter, Settings > Facebook, or Settings > Sina Weibo, then tap Update Contacts. This updates contact photos and social media account names in Contacts. Chapter 30 Contacts 133 Draft APPLE CONFIDENTIAL Unify contacts When you have contacts from multiple sources, you might have multiple entries for the same person. To keep redundant contacts from appearing in your All Contacts list, contacts from different sources that have the same name are linked and displayed as a single unified contact. When you view a unified contact, the title Unified Info appears. Link contacts. If two entries for the same person arent linked automatically, you can unify them manually. Edit one of the contacts, tap Edit, then tap Link Contact and choose the other contact entry to link to. Linked contacts arent merged. If you change or add information in a unified contact, the changes are copied to each source account where that information already exists. If you link contacts with different first or last names, the names on the individual cards wont change, but only one name appears on the unified card. To choose which name appears when you view the unified card, tap Edit, tap the linked card with the name you prefer, then tap Use This Name For Unified Card. Contacts settings Go to Settings > Mail, Contacts, Calendars, where you can:

Change how contacts are sorted Display contacts by first or last name Change how long names are shortened in lists Choose to show recent and favorite contacts in the multitasking screen Set a default account for new contacts Set your My Info card Chapter 30 Contacts 134 Draft APPLE CONFIDENTIAL Calculator 31 Tap numbers and functions in Calculator, just as you would with a standard calculator. Get to Calculator quickly! Swipe up from the bottom edge of the screen to open Control Center. Clear the display. To use the scientific calculator, rotate iPhone to landscape orientation. 135 Clear the display.Draft APPLE CONFIDENTIAL Compass 32 Compass at a glance Find a direction, see your latitude and longitude, find level, or match a slope. Tap anywhere to lock the heading. Deviation from the locked heading Align the crosshairs to level for accuracy. The direction iPhone is pointing Current location Swipe left to use the level. See your location. To see your current location, go to Settings > Privacy > Location Services and turn on Location Services and Compass. For more about Location Services, see Privacy on page 37. Stay on course. Tap the screen to lock in the current heading, then watch for a red band to see if youre off course. Important: The accuracy of the compass can be affected by magnetic or environmental interference; even the magnets in the iPhone earbuds can cause a deviation. Use the digital compass only for basic navigation assistance. Dont rely on it to determine precise location, proximity, distance, or direction. 136 Swipe left to use the level.Current locationAlign the crosshairs to level for accuracy.Tap anywhere to lock the heading.Deviation from the locked headingThe direction iPhone is pointingDraft APPLE CONFIDENTIAL On the level On an edge ...

... or lying flat Deviation from level Level!

Deviation from chosen slope Show the level. Swipe left on the Compass screen. Hang it straight. Hold iPhone against a picture frame or other object, then rotate them until you see green. For true level, the deviation is displayed on a black background. If the background is red (indicating relative slope), tap the screen to change it to black. Level the table. Lay iPhone flat on the table. Match that slope. Hold iPhone against the surface you want to match, then tap the screen to capture the slope. The slope you seek is shown in black, with deviation shown in red. Tap again to return to standard level. Chapter 32 Compass 137 On an edge ...... or lying flatDeviationfrom levelLevel!Deviation from chosen slopeDraft APPLE CONFIDENTIAL Nike + iPod 33 At a glance With a Nike + iPod Sensor (sold separately), the Nike + iPod app, available for iPhone 5s, iPhone 5c, and earlier, provides audible feedback on your speed, distance, time elapsed, and calories burned during a run or walk. The Nike + iPod app doesnt appear on the Home screen until you turn it on. Turn on Nike + iPod. Go to Settings > Nike + iPod. Choose a workout type. Calibrate based on your last workout. Choose or create a custom workout. Choose a standard workout. Review your workout history. Link and calibrate your sensor Nike + iPod collects workout data from a wireless sensor (sold separately) that you attach to your shoe. Before you use it the first time, you need to link your sensor to iPhone. Shoe, meet iPhone. To link the sensor to iPhone, attach the sensor to your shoe, then go to Settings > Nike + iPod > Sensor. 138 Choose a standard workout.Review your workout history.Choose or create acustom workout.Calibrate based on your last workout.Choose a workout type.Draft APPLE CONFIDENTIAL Be accurate. To calibrate Nike + iPod, record a workout over a known distance of at least a quarter mile (400 meters). Then, after you tap End Workout, tap Calibrate on the workout summary screen and enter the actual distance you covered. Try again. To reset to the default calibration, go to Settings > Nike + iPod. Work out Go! To start a workout, tap Workouts, and choose a workout. Take a break. If you need to stop for a moment, take iPhone and tap on the Lock screen. Tap when youre ready to continue. Finish. To end the workout, wake iPhone, tap Post it. Send your workout data to nikeplus.com. Open Nike + iPod, tap History, then tap Send to Nike+. (You need to be connected to the Internet.) Progress! Review your progress on nikeplus.com. Open Safari, log in to your account on nikeplus. com, then follow the onscreen instructions.

, then tap End Workout. Nike + iPod Settings Go to Settings > Nike + iPod, where you can adjust settings for:

Your power song The voice used for spoken feedback Units for distance Your weight Lock screen orientation Chapter 33 Nike + iPod 139 Draft A x i d n e p p A APPLE CONFIDENTIAL Accessibility Accessibility features iPhone offers these accessibility features:

Vision VoiceOver Support for braille displays Zoom Invert Colors and Grayscale Speak Selection Speak Screen Speak Auto-text Large, bold, and high-contrast text Button Shapes Reduce screen motion On/off switch labels Assignable ringtones and vibrations Video Descriptions Hearing Hearing aids Call audio routing Phone noise cancelation LED Flash for Alerts Subtitles and closed captions Mono audio and balance Interaction Siri Widescreen keyboards Guided Access Switch Control AssistiveTouch Turn on accessibility features. Go to Settings > General > Accessibility, or use the Accessibility Shortcut. See Accessibility Shortcut below. Use iTunes to configure accessibility. You can choose some accessibility options in iTunes on your computer. Connect iPhone to your computer, then select iPhone in the iTunes device list. Click Summary, then click Configure Accessibility at the bottom of the Summary screen. 140 Draft APPLE CONFIDENTIAL For more information about iPhone accessibility features, see www.apple.com/accessibility. Accessibility Shortcut Use the Accessibility Shortcut. Press the Home button quickly three times to turn any of these features on or off:

VoiceOver Invert Colors Grayscale Zoom Switch Control AssistiveTouch Guided Access (The shortcut starts Guided Access if its already turned on. See Guided Access on page 158.) Hearing Aid Control (if you have paired Made for iPhone hearing aids) Choose the features you want to control. Go to Settings > General > Accessibility > Accessibility Shortcut, then select the accessibility features you use. Not so fast. To slow down the triple-click speed, go to Settings > General > Accessibility > Home-

click Speed. (This also slows down double-clicks.) VoiceOver VoiceOver describes aloud what appears onscreen, so you can use iPhone without seeing it. VoiceOver tells you about each item on the screen as you select it. The VoiceOver cursor (a rectangle) encloses the item and VoiceOver speaks its name or describes it. Touch the screen or drag your finger over it to hear the items on the screen. When you select text, VoiceOver reads the text. If you turn on Speak Hints, VoiceOver may tell you the name of the item and provide instructionsfor example, double-tap to open. To interact with items, such as buttons and links, use the gestures described in Learn VoiceOver gestures on page 144. When you go to a new screen, VoiceOver plays a sound, then selects and speaks the first item on the screen (typically in the upper-left corner). VoiceOver also lets you know when the display changes to landscape or portrait orientation, and when the screen becomes locked or unlocked. Note: VoiceOver speaks in the language specified in International settings, which may be influenced by the Region Format setting in Settings > General > International. VoiceOver is available in many languages, but not all. VoiceOver basics Important: VoiceOver changes the gestures you use to control iPhone. When VoiceOver is on, you must use VoiceOver gestures to operate iPhoneeven to turn VoiceOver off. Turn VoiceOver on or off. Go to Settings > General > Accessibility > VoiceOver, or use the Accessibility Shortcut. See Accessibility Shortcut on page 141. Explore. Drag your finger over the screen. VoiceOver speaks each item you touch. Lift your finger to leave an item selected. Select an item: Tap it, or lift your finger while dragging over it. Appendix A Accessibility 141 Draft APPLE CONFIDENTIAL Select the next or previous item: Swipe right or left with one finger. Item order is left-to-right, top-to-bottom. Select the item above or below: Set the rotor to Vertical Navigation, then swipe up or down with one finger. If you dont find Vertical Navigation in the rotor, you can add it; see Use the VoiceOver rotor on page 145. Select the first or last item on the screen: Tap with four fingers at the top or bottom of the screen. Select an item by name: Triple-tap with two fingers anywhere on the screen to open the Item Chooser. Then type a name in the search field, or swipe right or left to move through the list alphabetically, or tap the table index to the right of the list and swipe up or down to move quickly through the list of items. Or use handwriting to select an item by writing its name; see Write with your finger on page 147. To dismiss the Item Chooser without making a selection, do a two-finger scrub (move two fingers back and forth three times quickly, making a z). Change an items name so its easier to find: Select the item, then double-tap and hold with two fingers anywhere on the screen. Speak the text of the selected item: Set the rotor to characters or words, then swipe down or up with one finger. Turn spoken hints on or off: Go to Settings > General > Accessibility > VoiceOver > Speak Hints. Use phonetic spelling: Go to Settings > General > Accessibility > VoiceOver >

Phonetic Feedback. Speak the entire screen, from the top: Swipe up with two fingers. Speak from the current item to the bottom of the screen: Swipe down with two fingers. Pause speaking: Tap once with two fingers. Tap again with two fingers to resume, or select another item. Mute VoiceOver: Double-tap with three fingers. Repeat to unmute. If youre using an external keyboard, press the Control key. Silence sound effects: Turn off Settings > General > Accessibility > VoiceOver > Use Sound Effects. Use a larger VoiceOver cursor. Turn on Settings > General > Accessibility > VoiceOver >

Large Cursor. Adjust the speaking voice. You can adjust the VoiceOver speaking voice:

Change the volume: Use the volume buttons on iPhone, or add volume to the rotor, then swipe up and down to adjust; see Use the VoiceOver rotor on page 145. Change the speech rate: Go to Settings > General > Accessibility > VoiceOver, then drag the Speaking Rate slider. You can also set the rotor to Speech Rate, then swipe up or down to adjust. Use pitch change: VoiceOver uses a higher pitch when speaking the first item of a group (such as a list or table) and a lower pitch when speaking the last item of a group. Go to Settings >

General > Accessibility > VoiceOver > Use Pitch Change. Speak punctuation: Set the rotor to Punctuation, then swipe up or down to select how much you want to hear. Control audio ducking: To choose whether audio thats playing is turned down while VoiceOver speaks, set the rotor to Audio Ducking, then swipe up or down. Change the language for iPhone: Go to Settings > General > Language & Region. VoiceOver pronunciation of some languages is affected by the Region Format you choose there. Appendix A Accessibility 142 Draft APPLE CONFIDENTIAL Change pronunciation: Set the rotor to Language, then swipe up or down. Language is available in the rotor only if you select more than one pronunciation in Settings > General >

Accessibility > VoiceOver > Speech > Rotor Languages. Choose which dialects are available in the rotor: Go to Settings > General > Accessibility >

VoiceOver > Speech > Rotor Languages. To adjust voice quality or speaking rate, tap next to the language. To remove languages from the rotor or change their order, tap Edit, tap the delete button or drag the reorder button up or down, then tap Done. Set the default dialect for the current iPhone language: Go to Settings > General >

Accessibility > VoiceOver > Speech. Download an enhanced quality reading voice: Go to Settings > General > Accessibility >

VoiceOver > Speech, tap a language, then tap Enhanced Quality. If youre using English, you can choose to download Alex, the same high-quality U.S. English voice used for VoiceOver on Mac computers. Use iPhone with VoiceOver Unlock iPhone. Press either the Home button or the Sleep/Wake button, swipe to select the Unlock slide, then double-tap the screen. Enter your passcode silently. To avoid having your passcode spoken as you enter it, use handwriting; see Write with your finger on page 147. Open an app, toggle a switch, or tap an item. Select the item, then double-tap the screen. Double-tap the selected item. Triple-tap the screen. Adjust a slider. Select the slider, then swipe up or down with one finger. Use a standard gesture. Double-tap and hold your finger on the screen until you hear three rising tones, then make the gesture. When you lift your finger, VoiceOver gestures resume. For example, to drag a volume slider with your finger instead of swiping up and down, select the slider, double-tap and hold, wait for the three tones, then slide left or right. Scroll a list or area of the screen. Swipe up or down with three fingers. Scroll continuously through a list: Double-tap and hold until you hear three rising tones, then drag up or down. Use the list index: Some lists have an alphabetical table index along the right side. Select the index, then swipe up or down to move through the index. You can also double-tap, hold, then slide your finger up or down. Reorder a list: You can change the order of items in some lists, such as the Rotor items in Accessibility settings. Select three rising tones, then drag up or down. to the right of an item, double-tap and hold until you hear Open Notification Center. Select any item in the status bar, then swipe down with three fingers. To dismiss Notification Center, do a two-finger scrub (move two fingers back and forth three times quickly, making a z). Open Control Center. Select any item in the status bar, then swipe up with three fingers. To dismiss Control Center, do a two-finger scrub. Switch apps. Press the Home button twice to see whats running. Swipe left or right with one finger to select an app, then tap to open. Or, set the rotor to Actions while viewing open apps and swipe up or down. Appendix A Accessibility 143 Draft APPLE CONFIDENTIAL Rearrange your Home screen. Select an icon on the Home screen, double-tap and hold, then drag. Lift your finger when the icon is in its new location. Drag an icon to the edge of the screen to move it to another Home screen. You can continue to select and move items until you press the Home button. Speak iPhone status information. Tap the status bar at the top of the screen, then swipe left or right to hear information about the time, battery life, Wi-Fi signal strength, and more. Speak notifications. Go to Settings > General > Accessibility > VoiceOver and turn on Always Speak Notifications. Notifications, including the text of incoming text messages, are spoken as they occur, even if iPhone is locked. Unacknowledged notifications are repeated when you unlock iPhone. Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off. Learn VoiceOver gestures When VoiceOver is on, standard touchscreen gestures have different effects, and additional gestures let you move around the screen and control individual items. VoiceOver gestures include two-, three-, and four-finger taps and swipes. For best results using multi-finger gestures, relax and let your fingers touch the screen with some space between them. You can use different techniques to perform VoiceOver gestures. For example, you can perform a two-finger tap using two fingers of one hand, or one finger from each hand. You can even use your thumbs. Some people use a split-tap gesture: instead of selecting an item and double-

tapping, touch and hold an item with one finger, then tap the screen with another finger. Try different techniques to discover what works best for you. If a gesture doesnt work, try a quicker movement, especially for a double-tap or swipe gesture. To swipe, try brushing the screen quickly with your finger or fingers. In VoiceOver settings, you can enter a special area where you can practice VoiceOver gestures without affecting iPhone or its settings. Practice VoiceOver gestures. Go to Settings > General > Accessibility > VoiceOver, then tap VoiceOver Practice. When you finish practicing, tap Done. If you dont see the VoiceOver Practice button, make sure VoiceOver is turned on. Here are some key VoiceOver gestures:

Navigate and read Tap: Select and speak the item. Swipe right or left: Select the next or previous item. Swipe up or down: Depends on the rotor setting. See Use the VoiceOver rotor on page 145. Two-finger swipe up: Read all from the top of the screen. Two-finger swipe down: Read all from the current position. Two-finger tap: Stop or resume speaking. Two-finger scrub: Move two fingers back and forth three times quickly (making a z) to dismiss an alert or go back to the previous screen. Three-finger swipe up or down: Scroll one page at a time. Three-finger swipe right or left: Go to the next or previous page (on the Home screen or in Stocks, for example). Appendix A Accessibility 144 Draft APPLE CONFIDENTIAL Three-finger tap: Speak additional information, such as position within a list or whether text is selected. Four-finger tap at top of screen: Select the first item on the page. Four-finger tap at bottom of screen: Select the last item on the page. Activate Double-tap: Activate the selected item. Triple-tap: Double-tap an item. Split-tap: As an alternative to selecting an item and double-tapping to activate it, touch an item with one finger, and then tap the screen with another. Double-tap and hold (1 second) + standard gesture: Use a standard gesture. The double-tap and hold gesture tells iPhone to interpret the next gesture as standard. For example, you can double-tap and hold, and then without lifting your finger, drag your finger to slide a switch. Two-finger double-tap: Answer or end a call. Play or pause in Music, Videos, Voice Memos, or Photos. Take a photo in Camera. Start or pause recording in Camera or Voice Memos. Start or stop the stopwatch. Two-finger double-tap and hold: Change an items label to make it easier to find. Two-finger triple-tap: Open the Item Chooser. Three-finger double-tap: Mute or unmute VoiceOver. Three-finger triple-tap: Turn the screen curtain on or off. Use the VoiceOver rotor Use the rotor to choose what happens when you swipe up or down with VoiceOver turned on, or to select special input methods such as Braille Screen Input or Handwriting. Operate the rotor. Rotate two fingers on the screen around a point between them. Choose rotor options. Go to Settings > General > Accessibility > VoiceOver > Rotor, then select the options you want to include in the rotor. The available rotor options and their effects depend on what youre doing. For example, if youre reading an email, you can use the rotor to switch between speaking text word-by-word or character-by-character when you swipe up or down. If youre browsing a webpage, you can set the rotor to speak all text (word-by-word or character-by-character), or to jump to the next item of a certain type, such as a header or link. When you use an Apple Wireless Keyboard to control VoiceOver, you can use the rotor to adjust settings such as volume, speech rate, use of pitch or phonetics, typing echo, and reading of punctuation. See Use VoiceOver with an Apple Wireless Keyboard on page 148. Use the onscreen keyboard When you activate an editable text field, the onscreen keyboard appears (unless you have an Apple Wireless Keyboard attached). Activate a text field. Select the text field, then double-tap. The insertion point and the onscreen keyboard appear. Appendix A Accessibility 145 Draft APPLE CONFIDENTIAL Enter text. Type characters using the onscreen keyboard:

Standard typing: Select a key on the keyboard by swiping left or right, then double-tap to enter the character. Or move your finger around the keyboard to select a key and, while continuing to touch the key with one finger, tap the screen with another finger. VoiceOver speaks the key when its selected, and again when the character is entered. Touch typing: Touch a key on the keyboard to select it, then lift your finger to enter the character. If you touch the wrong key, slide your finger to the key you want. VoiceOver speaks the character for each key as you touch it, but doesnt enter a character until you lift your finger. Direct Touch typing: VoiceOver is disabled for the keyboard only, so you can type just as you do when VoiceOver is off. Choose typing style: Go to Settings > General > Accessibility > VoiceOver > Typing Style. Or, set the rotor to Typing Mode and swipe up or down. Move the insertion point. Swipe up or down to move the insertion point forward or backward in the text. Use the rotor to choose whether you want to move the insertion point by character, by word, or by line. To jump to the beginning or end, double-tap the text. VoiceOver makes a sound when the insertion point moves, and speaks the character, word, or line that the insertion point moves across. When moving forward by words, the insertion point is placed at the end of each word, before the space or punctuation that follows. When moving backward, the insertion point is placed at the end of the preceding word, before the space or punctuation that follows it. Move the insertion point past the punctuation at the end of a word or sentence. Use the rotor to switch back to character mode. When moving the insertion point by line, VoiceOver speaks each line as you move across it. When moving forward, the insertion point is placed at the beginning of the next line (except when you reach the last line of a paragraph, when the insertion point is moved to the end of the line just spoken). When moving backward, the insertion point is placed at the beginning of the line thats spoken. Change typing feedback. Go to Settings > General > Accessibility > VoiceOver >

Typing Feedback. Use phonetics in typing feedback. Go to Settings > General > Accessibility > VoiceOver >

Use Phonetics. Text is read character by character. VoiceOver first speaks the character, then its phonetic equivalentfor example, f and then foxtrot. Delete a character. Use character as its deleted. If Use Pitch Change is turned on, VoiceOver speaks deleted characters in a lower pitch. Select text. Set the rotor to Edit, swipe up or down to choose Select or Select All, then double-

tap. If you chose Select, the word closest to the insertion point is selected when you double-

tap. To increase or decrease the selection, do a two-finger scrub to dismiss the pop-up menu, then pinch. Cut, copy, or paste. Set the rotor to Edit, select the text, swipe up or down to choose Cut, Copy, or Paste, then double-tap. Undo. Shake iPhone, swipe left or right to choose the action to undo, then double-tap. with any of the VoiceOver typing styles. VoiceOver speaks each Appendix A Accessibility 146 Draft APPLE CONFIDENTIAL Enter an accented character. In standard typing style, select the plain character, then double-tap and hold until you hear a sound indicating alternate characters have appeared. Drag left or right to select and hear the choices. Release your finger to enter the current selection. In touch typing style, touch and hold a character until the alternate characters appear. Change the keyboard language. Set the rotor to Language, then swipe up or down. Choose default language to use the language specified in International settings. The Language rotor item appears only if you select more than one language in Settings > General > Accessibility >

VoiceOver > Speech. Write with your finger Handwriting mode lets you enter text by writing characters on the screen with your finger. In addition to normal text entry, use handwriting mode to enter your iPhone passcode silently or open apps from the Home screen. Enter handwriting mode. Use the rotor to select Handwriting. If Handwriting isnt in the rotor, go to Settings > General > Accessibility > VoiceOver > Rotor and add it. Choose a character type. Swipe up or down with three fingers to choose lowercase, numbers, uppercase, or punctuation. Hear the currently selected character type. Tap with three fingers. Enter a character. Trace the character on the screen with your finger. Enter a space. Swipe right with two fingers. Go to a new line. Swipe right with three fingers. Delete the character before the insertion point. Swipe left with two fingers. Select an item on the Home screen. Start writing the name of the item. If there are multiple matches, continue to spell the name until it is unique, or swipe up or down with two fingers to choose from the current matches. Enter your passcode silently. Set the rotor to Handwriting on the passcode screen, then write the characters of your passcode. Skip to a letter in a table index. Select the index to the right of the table, then write the letter. Set the rotor to a web browsing element type. Write the first letter of a page element type. For example, write l to have up or down swipes skip to links, or h to skip to headings. Exit handwriting mode. Turn the rotor to a different selection. Type onscreen braille With Braille Screen Input enabled, you can use your fingers to enter six-dot or contracted braille codes directly on the iPhone screen. Tap codes with iPhone laying flat in front of you (tabletop mode), or hold iPhone with the screen facing away so your fingers curl back to tap the screen

(screen away mode). Turn on Braille Screen Input. Use the rotor to select Braille Screen Input. If you dont find it in the rotor, go to Settings > General > Accessibility > VoiceOver > Rotor and add it. Enter braille codes. Place iPhone flat in front of you or hold it with the screen facing away, then tap the screen with one or several fingers at the same time. Adjust entry dot positions. To move the entry dots to match your natural finger positions, tap and lift your right three fingers all at once to position dots 4, 5, and 6, followed immediately by your left three fingers for dots 1, 2, and 3. Appendix A Accessibility 147 Draft APPLE CONFIDENTIAL Switch between 6-dot and contracted braille. Swipe to the right with three fingers. To set the default, go to Settings > General > Accessibility > VoiceOver > Braille > Braille Screen Input. Enter a space. Swipe right with one finger. (In screen away mode, swipe to your right.) Delete the previous character. Swipe left with one finger. Cycle through spelling suggestions. Swipe up or down with one finger. Select an item on the Home screen. Start entering the name of the item. If there are multiple matches, continue to spell the name until it is unique, or swipe up or down with one finger to select a partial match. Open the selected app. Swipe right with two fingers. Turn braille contractions on or off. Swipe to the right with three fingers. Translate immediately (when contractions are enabled). Swipe down with two fingers. Stop entering braille. Do a two-finger scrub, or set the rotor to another setting. Use VoiceOver with an Apple Wireless Keyboard You can control VoiceOver using an Apple Wireless Keyboard paired with iPhone. See Use an Apple Wireless Keyboard on page 26. Use VoiceOver keyboard commands to navigate the screen, select items, read screen contents, adjust the rotor, and perform other VoiceOver actions. Most commands use the Control-Option key combination, abbreviated in the table that follow as VO. You can use VoiceOver Help to learn the keyboard layout and the actions associated with various key combinations. VoiceOver Help speaks keys and keyboard commands as you type them, without performing the associated action. VoiceOver keyboard commands VO = Control-Option Turn on VoiceOver help: VOK Turn off VoiceOver help: Escape Select the next or previous item: VORight Arrow or VOLeft Arrow Double-tap to activate the selected item: VOSpace bar Press the Home button: VOH Touch and hold the selected item: VOShiftM Move to the status bar: VOM Read from the current position: VOA Read from the top: VOB Pause or resume reading: Control Copy the last spoken text to the clipboard: VOShiftC Search for text: VOF Mute or unmute VoiceOver: VOS Open Notification Center: FnVOUp Arrow Open Control Center: FnVODown Arrow Open the Item Chooser: VOI Change the label of the selected item: VO/

Appendix A Accessibility 148 Draft APPLE CONFIDENTIAL Double-tap with two fingers: VO-

Adjust the rotor: Use Quick Nav (see below) Swipe up or down: VOUp Arrow or VODown Arrow Adjust the speech rotor: VOCommandLeft Arrow or VOCommandRight Arrow Adjust the setting specified by the speech rotor: VOCommandUp Arrow or VOCommand Down Arrow Turn the screen curtain on or off: VOShiftS Return to the previous screen: Escape Quick Nav Turn on Quick Nav to control VoiceOver using the arrow keys. Turn Quick Nav on or off: Left ArrowRight Arrow Select the next or previous item: Right Arrow or Left Arrow Select the next or previous item specified by the rotor: Up Arrow or Down Arrow Select the first or last item: ControlUp Arrow or ControlDown Arrow Double-tap to activate the selected item: Up ArrowDown Arrow Scroll up, down, left, or right: OptionUp Arrow, OptionDown Arrow, OptionLeft Arrow, or OptionRight Arrow Adjust the rotor: Up ArrowLeft Arrow or Up ArrowRight Arrow You can also use the number keys on an Apple Wireless Keyboard to dial a phone number in Phone or enter numbers in Calculator. Single-key Quick Nav for web browsing When you view a webpage with Quick Nav on, you can use the following keys on the keyboard to navigate the page quickly. Typing the key moves to the next item of the indicated type. To move to the previous item, hold the Shift key as you type the letter. Heading: H Link: L Text field: R Button: B Form control: C Image: I Table: T Static text: S ARIA landmark: W List: X Item of the same type: M Level 1 heading: 1 Level 2 heading: 2 Level 3 heading: 3 Level 4 heading: 4 Level 5 heading: 5 Level 6 heading: 6 Appendix A Accessibility 149 Draft APPLE CONFIDENTIAL Text editing Use these commands (with Quick Nav turned off) to work with text. VoiceOver reads the text as you move the insertion point. Go forward or back one character: Right Arrow or Left Arrow Go forward or back one word: OptionRight Arrow or OptionLeft Arrow Go up or down one line: Up Arrow or Down Arrow Go to the beginning or end of the line: CommandLeft Arrow or CommandDown Arrow Go to the beginning or end of the paragraph: OptionUp Arrow or OptionDown Arrow Go to the previous or next paragraph: OptionUp Arrow or OptionDown Arrow Go to the top or bottom of the text field: CommandUp Arrow or CommandDown Arrow Select text as you move: Shift + any of the insertion point movement commands above Select all text: CommandA Copy, cut, or paste the selected text: CommandC, CommandX, or CommandV Undo or redo last change: CommandZ or ShiftCommandZ Support for braille displays You can use a Bluetooth braille display to read VoiceOver output, and you can use a braille display with input keys and other controls to control iPhone when VoiceOver is turned on. For a list of supported braille displays, see www.apple.com/accessibility/ios/braille-display.html. Connect a braille display. Turn on the display, then go to Settings > Bluetooth and turn on Bluetooth. Then, go to Settings > General > Accessibility > VoiceOver > Braille and choose the display. Adjust Braille settings. Go to Settings > General > Accessibility > VoiceOver > Braille, where you can:

Choose contracted, uncontracted eight-dot, or uncontracted six-dot braille input or output Turn on the status cell and choose its location Turn on Nemeth code for equations Display the onscreen keyboard Choose to have the page turned automatically when panning Turn off automatic braille translation Change the braille translation from Unified English For information about common braille commands for VoiceOver navigation, and for information specific to certain displays, see support.apple.com/kb/HT4400. The braille display uses the language thats set for Voice Control. This is normally the language set for iPhone in Settings > International > Language. You can use the VoiceOver language setting to set a different language for VoiceOver and braille displays. Set the language for VoiceOver. Go to Settings > General > Language & Region. If you change the language for iPhone, you may need to reset the language for VoiceOver and your braille display. You can set the leftmost or rightmost cell of your braille display to provide system status and other information. For example:

Announcement History contains an unread message Appendix A Accessibility 150 Draft APPLE CONFIDENTIAL The current Announcement History message hasnt been read VoiceOver speech is muted The iPhone battery is low (less than 20% charge) iPhone is in landscape orientation The screen display is turned off The current line contains additional text to the left The current line contains additional text to the right Set the leftmost or rightmost cell to display status information. Go to Settings > General >

Accessibility > VoiceOver > Braille > Status Cell and tap Left or Right. See an expanded description of the status cell. On your braille display, press the status cells router button. Make phone calls with VoiceOver Answer or end a call. Double-tap the screen with two fingers. When a phone call is established with VoiceOver on, the screen displays the numeric keypad by default, instead of showing call options. Display call options. Select the Hide Keypad button in the lower-right corner and double-tap. Display the numeric keypad again. Select the Keypad button near the center of the screen and double-tap. Read math equations VoiceOver can read aloud math equations encoded using:

MathML on the web MathML or LaTeX in iBooks Author Hear an equation. Have VoiceOver read the text as usual. VoiceOver says math before it starts reading an equation. Explore the equation. Double tap the selected equation to display it full screen and move through it one element at a time. Swipe left or right to read elements of the equation. Use the rotor to select Symbols, Small Expressions, Medium Expressions, or Large Expressions, then swipe up or down to hear the next element of that size. You can continue to double-tap the selected element to drill down into the equation to focus on the selected element, then swipe left or right, up or down to read one part at a time. Equations read by VoiceOver can also be output to a braille device using Nemeth code, as well as the codes used by Unified English Braille, British English, French, and Greek. See Support for braille displays on page 150. Use VoiceOver with Safari Search the web. Select the search field, enter your search, then swipe right or left to move down or up the list of suggested search phrases. Then double-tap the screen to search the web using the selected phrase. Skip to the next page element of a particular type. Set the rotor to the element type, then swipe up or down. Set the rotor options for web browsing. Go to Settings > General > Accessibility > VoiceOver >

Rotor. Tap to select or deselect options, or drag up or down to reposition an item. Appendix A Accessibility 151 Draft APPLE CONFIDENTIAL Skip images while navigating. Go to Settings > General > Accessibility > VoiceOver > Navigate Images. You can choose to skip all images or only those without descriptions. Reduce page clutter for easier reading and navigation. Select the Reader item in the Safari address field (not available for all pages). If you pair an Apple Wireless Keyboard with iPhone, you can use single-key Quick Nav commands to navigate webpages. See Use VoiceOver with an Apple Wireless Keyboard on page 148. Use VoiceOver with Maps You can use VoiceOver to explore a region, browse points of interest, follow roads, zoom in or out, select a pin, or get information about a location. Explore the map. Drag your finger around the screen, or swipe left or right to move to another item. Zoom in or out. Select the map, set the rotor to Zoom, then swipe down or up with one finger. Pan the map. Swipe with three fingers. Browse visible points of interest. Set the rotor to Points of Interest, then swipe up or down with one finger. Follow a road. Hold your finger down on the road, wait until you hear pause to follow, then move your finger along the road while listening to the guide tone. The pitch increases when you stray from the road. Select a pin. Touch a pin, or swipe left or right to select the pin. Get information about a location. With a pin selected, double-tap to display the information flag. Swipe left or right to select the More Info button, then double-tap to display the information page. Hear location cues as you move about. Turn on Tracking with heading to hear street names and points of interest as you approach them. Edit videos and voice memos with VoiceOver You can use VoiceOver gestures to trim Camera videos and Voice Memo recordings. Trim a video. While viewing a video in Photos, double-tap the screen to display the video controls, then select the beginning or end of the trim tool. Then swipe up to drag to the right, or swipe down to drag to the left. VoiceOver announces the amount of time the current position will trim from the recording. To complete the trim, select Trim and double-tap. Trim a voice memo. Select the memo in Voice Memos, tap Edit, then tap Start Trimming. Select the beginning or end of the selection, double-tap and hold, then drag to adjust. VoiceOver announces the amount of time the current position will trim from the recording. Tap Play to preview the trimmed recording. When youve got it the way you want it, tap Trim. Zoom Many apps let you zoom in or out on specific items. For example, you can double-tap or pinch to look closer in Photos or expand webpage columns in Safari. But, theres also a general Zoom feature that lets you magnify the screen no matter what youre doing. You can zoom the entire screen (Full Screen Zoom) or zoom part of the screen in a resizable window and leave the rest of the screen unmagnified (Window Zoom). And, you can use Zoom together with VoiceOver. Turn Zoom on or off. Go to Settings > General > Accessibility > Zoom. Or, use the Accessibility Shortcut. See Accessibility Shortcut on page 141. Appendix A Accessibility 152 Draft APPLE CONFIDENTIAL Zoom in or out. With Zoom turned on, double-tap the screen with three fingers. Vary the magnification. Double-tap with three fingers, then drag up or down. The tap-and-drag gesture is similar to a double-tap, except you dont lift your fingers on the second tapinstead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger. iPhone returns to the adjusted magnification when you zoom in again using the three-finger double-tap. Pan to see more. Drag the screen with three fingers. Or, hold your finger near the edge of the screen to pan to that side. Move your finger closer to the edge to pan more quickly. Switch between Full Screen Zoom and Window Zoom. Tap once with three fingers, then tap Window Zoom or Full Screen Zoom in the zoom controls that appear. To choose the mode thats used when you turn on Zoom, go to Settings > General > Accessibility > Zoom > Zoom Region. Resize the zoom window (Window Zoom). Tap once with three fingers, tap Resize Lens, then drag any of the round handles that appear. Move the zoom window (Window Zoom). Drag the handle at the bottom of the zoom window. Show the zoom controller. Turn on Settings > General > Accessibility > Zoom > Show Controller, or tap once with three fingers then choose Show Controller. Then you can double-tap the floating Zoom Controls button to zoom in or out, single-tap the button to display the zoom controls, or drag it to pan. To move the Zoom Controls button, tap and hold the button, then drag it to a new location. To adjust the transparency of the zoom controller, go to Settings >

General > Accessibility > Zoom > Idle Visibility. Have Zoom track your selections or the text insertion point. Turn on Settings > Accessibility >

Zoom > Follow Focus. Then, for example, if you use VoiceOver, turning on this option causes the zoom window to magnify each element on the screen as you select it using a swipe in VoiceOver. Zoom in on your typing without magnifying the keyboard. Go to Settings > General >

Accessibility > Zoom, turn on Follow Focus, then turn off Zoom Keyboard. When you zoom in while typing (in Messages or Notes, for example), the text you type is magnified while all of the keyboard remains visible. Display the magnified part of the screen in grayscale or inverted color. Tap once with three fingers, then tap Choose Filter in the zoom controls that appear. Tap again to turn off the effect. While using Zoom with an Apple Wireless Keyboard (see Use an Apple Wireless Keyboard on page 26), the screen image follows the insertion point, keeping it in the center of the display. Invert Colors and Grayscale Sometimes, inverting the colors or changing to grayscale on the iPhone screen makes it easier to read. Invert the screen colors. Go to Settings > General > Accessibility > Invert Colors. See the screen in grayscale. Turn on Settings > General > Accessibility > Grayscale. Turn on both effects to see inverted grayscale. You can also apply these effects to just the contents of the zoom windowsee Zoom on page 152. Appendix A Accessibility 153 Draft APPLE CONFIDENTIAL Speak Selection Even with VoiceOver turned off, you can have iPhone read aloud any text you select. iPhone analyzes the text to determine the language, then reads it to you using the appropriate pronunciation. Turn on Speak Selection. Go to Settings > General > Accessibility > Speak Selection. There you can also:

Choose a language, dialect, and voice quality Adjust the speaking rate Choose to have individual words highlighted as theyre read Have text read to you. Select the text, then tap Speak. You can also have iPhone read the entire screen to yousee Speak Screen on page 154. Speak Screen iPhone can read the contents of the screen to you, even if you dont use VoiceOver. Turn on Speak Screen. Turn on Settings > General > Accessibility > Speech > Speak Screen. Have iPhone speak the screen. Swipe down from the top of the screen with two fingers, or ask Siri to speak screen. Use the controls that appear to pause speaking or adjust the rate. Highlight whats being spoken. Turn on Highlight Content, below the Speak Screen switch when its turned on. You can also have iPhone read just text you selectsee Speak Selection on page 154. Speak Auto-text Speak Auto-text speaks the text corrections and suggestions iPhone makes when you type. Turn Speak Auto-text on or off. Go to Settings > General > Accessibility > Speak Auto-text. Speak Auto-text also works with VoiceOver and Zoom. Large, bold, and high-contrast text Display larger text in apps such as Settings, Calendar, Contacts, Mail, Messages, and Notes. Go to Settings > General > Text Size, then adjust the slider. For even larger text, go to Settings >

General > Accessibility > Larger Text, then turn on Larger Accessibility Sizes. Display bolder text on iPhone. Go to Settings > General > Accessibility, then turn on Bold Text. Increase text contrast where possible. Go to Settings > General > Accessibility, then turn on Increase Contrast. Button Shapes iPhone can add a colored background shape or an underline to buttons so theyre easier to see. Emphasize buttons. Turn on Settings > General > Accessibility > Button Shapes. Appendix A Accessibility 154 Draft APPLE CONFIDENTIAL Reduce screen motion You can stop the movement of some screen elements, for example, the parallax effect of icons and alerts against the wallpaper, or motion transitions. Reduce motion. Go to Settings > General > Accessibility and turn on Reduce Motion. On/off switch labels To make it easier to see whether a setting is on or off, you can have iPhone show an additional label on on/off switches. Add switch setting labels. Go to Settings > General > Accessibility and turn on On/Off Labels. Assignable ringtones and vibrations You can assign distinctive ringtones to people in your contacts list for audible caller ID. You can also assign vibration patterns for notifications from specific apps, for phone calls, for FaceTime calls or messages from special contacts, and to alert you of a variety of other events, including new voicemail, new mail, sent mail, Tweet, Facebook Post, and reminders. Choose from existing patterns, or create new ones. See Sounds and silence on page 31. You can purchase ringtones from the iTunes Store on iPhone. See Chapter 22, iTunes Store, on page 111. Video Descriptions Video descriptions provide an audible description of video scenes. If you have a video that includes video descriptions, iPhone can play them for you. Turn on Video Descriptions. Go to Settings > General > Accessibility > Video Descriptions. Hearing aids Made for iPhone hearing aids If you have a Made for iPhone hearing aid (available for iPhone 4s or later), you can use iPhone to adjust its settings to suit your listening needs, stream audio, or use iPhone as a remote mic. Pair with iPhone. If your hearing aids arent listed at Settings > General > Accessibility > Hearing Aids, you need to pair them with iPhone. To start, open the battery door on each hearing aid. Next, go to Settings > Bluetooth on iPhone and make sure Bluetooth is turned on. Then go to Settings > General > Accessibility > Hearing Aids. Close the battery doors on your hearing aids and wait until they appear in the list of devices (this could take a minute). When the hearing aid appears, tap it and respond to the pairing request. When pairing is finished, you hear a series of beeps and a tone, and a checkmark appears next to the hearing aid in the Devices list. Pairing can take as long as 60 secondsdont try to stream audio or otherwise use the hearing aid until pairing is finished. You should only need to pair once (and your audiologist might do it for you). After that, each time you turn your hearing aids back on, they reconnect to iPhone. Adjust hearing aid settings and view status. Go to Settings > General > Accessibility > Hearing Aids, or choose Hearing Aids from the Accessibility Shortcut. See Accessibility Shortcut on page 141. Hearing aid settings appear only after you pair your hearing aids with iPhone. Appendix A Accessibility 155 Draft APPLE CONFIDENTIAL For shortcut access from the Lock screen, turn on Settings > Accessibility > Hearing Aids >

Control on Lock Screen. Use the settings to:

Check hearing aid battery status. Adjust ambient microphone volume and equalization. Choose which hearing aids (left, right, or both) receive streaming audio. Control Live Listen. Stream audio to your hearing aids. Stream audio from Phone, Siri, Music, Videos, and more, by choosing your hearing aids from the AirPlay menu Use iPhone as a remote microphone. You can use Live Listen to stream sound from the microphone in iPhone to your hearing aids. This can help you hear better in some situations by positioning the iPhone nearer the sound source. Triple-click the Home button, choose Hearing Aids, then tap Start Live Listen. Use your hearing aids with more than one iOS device. If you have more than one iOS device

(both iPhone and iPad, for example), your hearing aid connection automatically switches from one to the other when you do something that generates audio on the other device, or when you receive a phone call on iPhone. Changes you make to hearing aid settings on one device are automatically sent to your other iOS devices. To take advantage of this, all of the devices must be on the same Wi-Fi network and logged in to the same iCloud account.

. Hearing Aid Mode iPhone has a Hearing Aid Mode that, when activated, may reduce interference with some hearing aid models. Hearing Aid Mode reduces the transmission power of the cellular radio in the GSM 1900 MHz band and may result in decreased 2G cellular coverage. Activate Hearing Aid Mode. Go to Settings > General > Accessibility > Hearing Aids. Hearing aid compatibility The FCC has adopted hearing aid compatibility (HAC) rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2007 or C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

An M rating for reduced radio frequency interference to enable acoustic coupling with hearing aids that are not operating in telecoil mode A T rating for inductive coupling with hearing aids operating in telecoil mode These ratings are given on a scale from one to four, where four is the most compatible. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. For iPhone hearing aid compatibility ratings, see www.apple.com/support/hac. Hearing aid compatibility ratings dont guarantee that a particular hearing aid works with a particular phone. Some hearing aids may work well with phones that dont meet particular ratings. To ensure interoperability between a hearing aid and a phone, try using them together before purchase. Appendix A Accessibility 156 Draft APPLE CONFIDENTIAL This phone has been tested and rated for use with hearing aids for some of the wireless technologies it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or Apple for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. Mono audio and balance Mono Audio combines the left and right stereo channels into a mono signal played on both channels. You can adjust the balance of the mono signal for greater volume on the right or left channel. Turn Mono Audio on or off. Go to Settings > General > Accessibility > Mono Audio. Adjust the balance. Go to Settings > General > Accessibility and drag the Left Right Stereo Balance slider. Subtitles and closed captions The Videos app includes an Alternate Track button

, which you can tap to choose subtitles and captions offered by the video youre watching. Standard subtitles and captions are usually listed, but if you prefer special accessible captions, such as subtitles for the deaf and hard of hearing

(SDH), you can set iPhone to list them instead when theyre available. Prefer accessible subtitles and closed captions for the hard of hearing in the list of available subtitles and captions. Turn on Settings > General > Accessibility > Subtitles & Captioning >

Closed Captions + SDH. This also turns on subtitles and captions in the Videos app. Choose from available subtitles and captions. Tap Customize your subtitles and captions. Go to Settings > General > Accessibility > Subtitles &

Captioning > Style, where you can choose an existing caption style or create a new style based on your choice of:

Font, size, and color Background color and opacity Text opacity, edge style, and highlight while watching a video in Videos. Not all videos include closed captions. Siri With Siri, you can do things like opening apps just by asking, and VoiceOver can read Siri responses to you. See Chapter 4, Siri, on page 43. Widescreen keyboards Many apps, including Mail, Safari, Messages, Notes, and Contacts, let you rotate iPhone when youre typing, so you can use a larger keyboard. Appendix A Accessibility 157 Draft APPLE CONFIDENTIAL Large phone keypad Make phone calls simply by tapping entries in your contacts and favorites lists. When you need to dial a number, iPhones large numeric keypad makes it easy. See Make a call on page 46. LED Flash for Alerts If you cant hear the sounds that announce incoming calls and other alerts, you can have iPhone flash its LED (next to the camera lens on the back of the iPhone). This works only when iPhone is locked or asleep. Turn on LED Flash for Alerts. Go to Settings > General > Accessibility > LED Flash for Alerts. Call audio routing You can have the audio of incoming or outgoing calls automatically routed through a headset or speaker phone instead of iPhone. Reroute audio for calls. Go to Settings > General > Accessibility > Call Audio Routing, then choose how you want to hear and speak your calls. You can also have audio from calls routed to your hearing aids; see Hearing aids on page 155. Phone noise cancelation iPhone uses ambient noise cancelation to reduce background noise. Turn noise cancelation on or off. Go to Settings > General > Accessibility > Phone Noise Cancelation. Guided Access Guided Access helps an iPhone user stay focused on a task. Guided Access dedicates iPhone to a single app, and lets you control app features. Use Guided Access to:

Temporarily restrict iPhone to a particular app Disable areas of the screen that arent relevant to a task, or areas where an accidental gesture might cause a distraction Limit how long someone can use an app Disable the iPhone Sleep/Wake or volume buttons Turn on Guided Access. Go to Settings > General > Accessibility > Guided Access, where you can:

Turn Guided Access on or off Set a passcode that controls the use of Guided Access and prevents someone from leaving a session Set whether other accessibility shortcuts are available during a session Start a Guided Access session. After turning on Guided Access, open the app you want to run, then triple-click the Home button. Adjust settings for the session, then click Start. Disable app controls and areas of the app screen: Draw a circle or rectangle around any part of the screen you want to disable. Drag the mask into position or use the handles to adjust its size. Enable the Sleep/Wake or Volume buttons: Tap Options below Hardware Buttons. Appendix A Accessibility 158 Draft APPLE CONFIDENTIAL Keep iPhone from switching from portrait to landscape or from responding to other motions: Tap Options, then turn off Motion. Prevent typing: Tap Options, then turn off Keyboards. Ignore all screen touches: Turn off Touch at the bottom of the screen. Set a session time limit: Tap Time Limit Options at the bottom of the screen. End the session. Triple-click the Home button and enter the Guided Access passcode, or use TouchID. Switch Control Switch Control lets you control iPhone using a single switch or multiple switches. Use any of several methods to perform actions such as selecting, tapping, dragging, typing, and even free-

hand drawing. The basic technique is to use a switch to select an item or location on the screen, and then use the same (or different) switch to choose an action to perform on that item or location. Three basic methods are:

Item scanning (default), which highlights different items on the screen until you select one. Point scanning, which lets you use scanning crosshairs to pick a screen location. Manual selection, which lets you move from item to item on demand (requires multiple switches). Whichever method you use, when you select an individual item (rather than a group), a menu appears so you can choose how to act on the selected item (tap, drag, or pinch, for example). If you use multiple switches, you can set up each switch to perform a specific action and customize your item selection method. For example, instead of automatically scanning screen items, you can set up switches to move to the next or previous item on demand. You can adjust the behavior of Switch Control in a variety of ways, to suit your specific needs and style. Add a switch and turn on Switch Control You can use any of these as a switch:

An external adaptive switch. Choose from a variety of popular USB or Bluetooth switches. The iPhone screen. Tap the screen to trigger the switch. The iPhone FaceTime camera. Move your head to trigger the switch. You can use the camera as two switches; one when you move your head to the left, and the other when you move your head to the right. Add a switch and choose its action. Go to Settings > General > Accessibility > Switch Control >

Switches. If you use only one switch, it is your Select Item switch by default. If youre adding an external switch, you need to connect it to iPhone before it will appear in the list of available switches. Follow the instructions that came with the switch. If it connects using Bluetooth, you need to pair it with iPhoneturn on the switch, then go to Settings > Bluetooth, tap the switch, and follow the onscreen instructions. For more information, see Bluetooth devices on page 36. Turn on Switch Control. Go to Settings > General > Accessibility > Switch Control, or use the Accessibility Shortcutsee Accessibility Shortcut on page 141. Turn off Switch Control. Use any scanning method to select Settings > General > Accessibility >

Switch Control. Or, triple-click the Home button. Appendix A Accessibility 159 Draft APPLE CONFIDENTIAL Basic techniques Whether you use item scanning or point scanning, the Switch Control basics are the same. Select an item. While the item is highlighted, trigger the switch youve set up as your Select Item switch. If you are using a single switch, it is your Select Item switch by default. Perform an action on the selected item. Select a command from the control menu that appears when you select the item. The layout of the menu depends on whether you use Auto Tap. With Auto Tap off: The control menu includes only the Tap button and the More button (two dots at bottom). If youre in a scrollable area of the screen, a Scroll button also appears. To tap the highlighted item, trigger your Select Item button when Tap is highlighted. To see additional action buttons, select More at the bottom of the menu. If you have multiple switches, you can set one up specifically for tapping. With Auto Tap on: To tap the item, do nothingthe item is automatically tapped when the Auto Tap interval expires (0.75 seconds if you havent changed it). To see the control menu, trigger your Select Item button before the Auto Tap interval expires. The control menu skips the Tap button and goes right to the full set of action buttons. Turn on Auto Tap. Go to Settings > General > Accessibility > Switch Control > Auto Tap. To tap an item with Auto Tap on, just wait for the Auto Tap interval to expire. Dismiss the control menu without choosing an action. Tap while the original item is highlighted and all the icons in the control menu are dimmed. Or, choose Escape from the control menu. The menu goes away after cycling the number of times you specify at Settings >

General > Accessibility > Switch Control > Loops. Perform screen gestures. Choose Gestures from the control menu. Scroll the screen. Select an item in a scrollable part of the screen, then:

With Auto Tap off: Select the Scroll Down button (next to the Tap button) in the control menu. Or, for more scrolling options, select More, then select Scroll. With Auto Tap on: Select Scroll from the control menu. If many actions are available, you might have to select More first. Tap the home button. Select Home in the control menu. Perform other hardware actions. Select any item, then select Device from the menu that appears. Use the menu to mimic these actions:

Click the Home button Double-click the Home button for multitasking Open Notification Center or Control Center Press the Sleep/Wake button to lock iPhone Rotate iPhone Flip the Mute switch Press the volume buttons Hold down the Home button to open Siri Triple-click the Home button Shake iPhone Press Home and Sleep/Wake buttons simultaneously to take a screenshot Swipe down from the top with two fingers to speak the screen (if you have Speak Screen turned on) Appendix A Accessibility 160 Draft APPLE CONFIDENTIAL Item scanning Item scanning alternately highlights each item or group of items on the entire screen until you trigger your Select Item switch. If there are many items, Switch Control highlights them in groups. When you select a group, highlighting continues with the items in the group. When you select a unique item, scanning stops and the control menu appears. Item scanning is the default when you first turn on Switch Control. Select an item or enter a group. Watch (or listen) as items are highlighted. When the item you want to control (or the group containing the item) is highlighted, trigger your Select Item switch. Work your way down in the hierarchy of items until you select the individual item you want to control. Back out of a group. Trigger your Select Item switch when the dashed highlight around the group or item appears. Dismiss the control menu without performing an action. Trigger your Select Item switch when the item itself is highlighted. Or, choose Escape from the control menu. Hear the names of items as they are highlighted. Turn on Settings > General > Accessibility >

Switch Control > Speech. Or, select Settings from the control menu, then select Speech On. Slow down the scanning. Go to Settings > General > Accessibility > Switch Control > Auto Scanning Time. Point scanning Point scanning lets you select an item on the screen by pinpointing it with scanning crosshairs. Switch to point scanning. Use item scanning to select Point Mode from the control menu. The vertical crosshair appears when you close the menu. Select an item. Trigger your Select Item switch when the item you want is within the broad, horizontal scanning band, then trigger again when the fine scanning line is on the item. Repeat for vertical scanning. Refine your selection point. Select Refine Selection from the control menu. Return to item scanning. Select Item Mode from the control menu. Manual selection You can select a screen item directly using dedicated switches instead of having iPhone alternately highlight every item. Stop scanning and highlight items yourself. Add switches in addition to your Select Item switch to perform the Move To Next Item and Move To Previous Item actions. (You can use the iPhone FaceTime camera with head-left and head-right movements for these switches.) When youve added the switches, turn off Settings > General > Accessibility > Switch Control > Auto Scanning. Important: Dont turn off Auto Scanning if you use only one switch. You need at least two: one to move to an item and a second to select the item. Settings and adjustments Adjust basic settings. Go to Settings > General > Accessibility > Switch Control, where you can:

Add switches and specify their function Turn off auto scanning (only if youve added a Move to Next Item switch) Adjust how rapidly items are scanned Set scanning to pause on the first item in a group Appendix A Accessibility 161 Draft APPLE CONFIDENTIAL Choose how many times to cycle through the screen before hiding Switch Control Turn Auto Tap on or off and set the interval for performing a second switch action to show the control menu Set whether a movement action is repeated when you hold down a switch, and how long to wait before repeating Set whether and how long you need to hold a switch down before it is accepted as a switch action Have Switch Control ignore accidental repeated switch triggers Adjust point scanning speed Turn on sound effects or have items read aloud as they are scanned Choose what to include in the Switch Control menu Set whether items should be grouped while item scanning Make the selection cursor larger or a different color Save custom gestures to the control menu (in Gestures > Saved) Fine-tune Switch Control. Choose Settings from the control menu to:

Adjust scanning speed Change the location of the control menu Switch between item scan mode and point scan mode Choose whether point scan mode displays crosshairs or a grid Reverse the scanning direction Turn on or off sound or speech accompaniment Turn off groups to scan items one at a time AssistiveTouch AssistiveTouch helps you use iPhone if you have difficulty touching the screen or pressing the buttons. You can use AssistiveTouch without any accessory, to perform gestures that are difficult for you. You can also use an adaptive accessory (such as a joystick) with AssistiveTouch to control iPhone. The AssistiveTouch menu lets you perform actions such as these by just tapping (or the equivalent on your accessory):

press the Home button summon Siri perform multi-finger gestures access Control Center or Notification Center adjust iPad volume shake iPhone capture a screenshot Turn on AssistiveTouch. Go to Settings > General > Accessibility > AssistiveTouch, or use the Accessibility Shortcut. See Accessibility Shortcut on page 141. When Assistive Touch is on, the floating menu button appears on the screen. Show or hide the menu. Tap the floating menu button, or click the secondary button on your accessory. Appendix A Accessibility 162 Draft APPLE CONFIDENTIAL Simulate pressing the Home button. Tap the menu button, then tap Home. Lock or rotate the screen, adjust iPhone volume, or simulate shaking iPhone. Tap the menu button, then tap Device. Perform a swipe or drag that uses 2, 3, 4, or 5 fingers. Tap the menu button, tap Device > More

> Gestures, then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, swipe or drag in the direction required by the gesture. When you finish, tap the menu button. Perform a pinch gesture. Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button. Create your own gesture. You can add your own favorite gestures to the control menu (for example, tap and hold or two-finger rotation). Tap the menu button, tap Favorites, then tap an empty gesture placeholder. Or go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture. Example 1: To create the rotation gesture, go to Settings > Accessibility > AssistiveTouch >

Create New Gesture. On the gesture recording screen that prompts you to touch to create a gesture, rotate two fingers on the iPhone screen around a point between them. (You can do this with a single finger or stylusjust create each arc separately, one after the other.) If it doesnt turn out quite right, tap Cancel and try again. When it looks right, tap Save and give the gesture a namemaybe Rotate 90. Then, to rotate the view in Maps, for example, open Maps, tap the AssistiveTouch menu button, and choose Rotate 90 from Favorites. When the blue circles representing the starting finger positions appear, drag them to point around which you want to rotate the map, then release. You might want to create several gestures with different degrees of rotation. Example 2: Lets create the touch and hold gesture that you use to start rearranging icons on your Home screen. This time, on the gesture recording screen, hold down your finger in one spot until the recording progress bar reaches halfway, then lift your finger. Be careful not to move your finger while recording, or the gesture will be recorded as a drag. Tap Save and name the gesture. To use the gesture, tap the AssistiveTouch menu button and choose your gesture from Favorites. When the blue circle representing your touch appears, drag it over a Home screen icon and release. If you record a sequence of taps or drags, theyre all played back at the same time. For example, using one finger or stylus to record four separate, sequential taps at four locations on the screen creates a simultaneous four-finger tap. Exit a menu without performing a gesture. Tap anywhere outside the menu. To return to the previous menu, tap the arrow in the middle of the menu. Move the menu button. Drag it anywhere along the edge of the screen. Adjust your accessory tracking speed. Go to Settings > General > Accessibility >

AssistiveTouch > Touch speed. Hide the menu button (with an accessory attached). Go to Settings > General > Accessibility >

AssistiveTouch > Always Show Menu. Appendix A Accessibility 163 Draft APPLE CONFIDENTIAL TTY support You can use the iPhone TTY Adapter cable (sold separately in many areas) to connect iPhone to a TTY machine. Go to www.apple.com/store (may not be available in all areas) or check with your local Apple retailer. Connect iPhone to a TTY machine. Go to Settings > Phone and turn TTY on, and then connect iPhone to your TTY machine using the iPhone TTY Adapter. When TTY on iPhone is turned on, the TTY icon screen. For information about using a particular TTY machine, see the documentation that came with the machine. appears in the status bar at the top of the Visual voicemail The play and pause controls in visual voicemail let you control the playback of messages. Drag the playhead on the scrubber bar to repeat a portion of the message thats hard to understand. See Visual voicemail on page 49. Voice Control Voice Control lets you make phone calls and control Music playback using voice commands. See Make a call on page 46, and Siri and Voice Control on page 69. Accessibility in OS X Take advantage of the accessibility features in OS X when you use iTunes to sync with iPhone. In the Finder, choose Help > Help Center, then search for accessibility. For more information about iPhone and OS X accessibility features, see www.apple.com/accessibility. Appendix A Accessibility 164 Draft

 

 

APPLE CONFIDENTIAL International Keyboards B x i d n e p p A Use international keyboards International keyboards let you type text in many different languages, including Asian languages and languages written from right to left. For a list of supported keyboards, go to www.apple.com/iphone, choose your iPhone, click Tech Specs, then scroll to Languages. Manage keyboards. Go to Settings > General > Keyboard > Keyboards. Add a keyboard: Tap Add New Keyboard, then choose a keyboard from the list. Repeat to add more keyboards. Remove a keyboard: Tap Edit, tap next to the keyboard you want to remove, tap Delete, then tap Done. Edit your keyboard list: Tap Edit, drag next to a keyboard to a new place in the list, then tap Done. To enter text in a different language, switch keyboards. Switch keyboards while typing. Touch and hold the Globe key keyboards. To choose a keyboard, slide your finger to the name of the keyboard, then release. The Globe key appears only if you enable more than one keyboard. to show all your enabled You can also just tap briefly. Continue tapping to access other enabled keyboards.

. When you tap

, the name of the newly activated keyboard appears Many keyboards provide letters, numbers, and symbols that arent visible on the keyboard. Enter accented letters or other characters. Touch and hold the related letter, number, or symbol, then slide to choose a variant. For example:

On a Thai keyboard: Choose native numbers by touching and holding the related Arabic number. On a Chinese, Japanese, or Arabic keyboard: Suggested characters or candidates appear at the top of the keyboard. Tap a candidate to enter it, or swipe left to see more candidates. Use the extended suggested candidate list. Tap the up arrow on the right to view the full candidate list. Scroll the list: Swipe up or down. Return to the short list: Tap the down arrow. When using certain Chinese or Japanese keyboards, you can create a shortcut for word and input pairs. The shortcut is added to your personal dictionary. When you type a shortcut while using a supported keyboard, the paired word or input is substituted for the shortcut. Turn shortcuts on or off. Go to Settings > General > Keyboard > Shortcuts. Shortcuts are available for:

Simplified Chinese: Pinyin Traditional Chinese: Pinyin and Zhuyin 165 Draft APPLE CONFIDENTIAL Japanese: Romaji and 50 Key Reset your personal dictionary. Go to Settings > General > Reset > Reset Keyboard Dictionary. All custom words and shortcuts are deleted, and the keyboard dictionary returns to its default state. Special input methods You can use keyboards to enter some languages in different ways. A few examples are Chinese Cangjie and Wubihua, Japanese Kana, and Facemarks. You can also use your finger or a stylus to write Chinese characters on the screen. Build Chinese characters from the component Cangjie keys. As you type, suggested characters appear. Tap a character to choose it, or continue typing up to five components to see more options. Build Chinese Wubihua (stroke) characters. Use the keypad to build Chinese characters using up to five strokes, in the correct writing sequence: horizontal, vertical, left falling, right falling, and hook. For example, the Chinese character (circle) should begin with the vertical stroke . As you type, suggested Chinese characters appear (the most commonly used characters appear first). Tap a character to choose it. If youre not sure of the correct stroke, enter an asterisk (*). To see more character options, type another stroke, or scroll through the character list. Tap the match key () to show only characters that match exactly what you typed. Write Chinese characters. Write Chinese characters directly on the screen with your finger when Simplified or Traditional Chinese handwriting input is turned on. As you write character strokes, iPhone recognizes them and shows matching characters in a list, with the closest match at the top. When you choose a character, its likely follow-on characters appear in the list as additional choices. Matching characters You can type some complex characters, such as (part of the name for the Hong Kong International Airport), by writing two or more component characters in sequence. Tap the character to replace the characters you typed. Roman characters are also recognized. Type Japanese kana. Use the Kana keypad to select syllables. For more syllable options, drag the list to the left or tap the arrow key. Type Japanese romaji. Use the Romaji keyboard to type syllables. Alternative choices appear along the top of the keyboard; tap one to type it. For more syllable options, tap the arrow key and select another syllable or word from the window. Appendix B International Keyboards 166 Matching charactersDraft APPLE CONFIDENTIAL Type facemarks or emoticons. Use the Japanese Kana keyboard and tap the

, then tap the Use the Japanese Romaji keyboard (QWERTY-Japanese layout): Tap Use the Chinese (Simplified or Traditional) Pinyin or (Traditional) Zhuyin keyboard: Tap key.

, then key. Or you can:

tap the key. Appendix B International Keyboards 167 Draft APPLE CONFIDENTIAL iPhone in Business C x i d n e p p A With support for secure access to corporate networks, directories, custom apps, and Microsoft Exchange, iPhone is ready to go to work. For detailed information about using iPhone in business, go to www.apple.com/iphone/business. Mail, Contacts, and Calendar To use iPhone with your work accounts, you need to know the settings your organization requires. If you received your iPhone from your organization, the settings and apps you need might already be installed. If its your own iPhone, your system administrator may provide you with the settings for you to enter, or they may have you connect to a mobile device management server that installs the settings and apps you should have. Organizational settings and accounts are typically in configuration profiles. You might be asked to install a configuration profile that was sent to you in an email, or one that is downloaded from a web page. When you open the file, iPhone asks for your permission to install the profile, and displays information about what it contains. In most cases, when you install a configuration profile that sets up an account for you, some iPhone settings cant be changed. For example, your organization might turn on Auto-Lock and require you to set a passcode in order to protect the information in the accounts you access. You can see your profiles in Settings > General > Profiles. If you delete a profile, all of the settings and accounts associated with the profile are also removed, including any custom apps your organization provided or had you download. If you need a passcode to delete a profile, contact your system administrator. Network access A VPN (virtual private network) provides secure access over the Internet to private resources, such as your organizations network. You may need to install a VPN app from the App Store that configures your iPhone to access a particular network. Contact your system administrator for information about apps and settings you need. Apps In addition to the built-in apps and the ones you get from the App Store, your organization may want you to have certain other apps. They might provide you with a pre-paid redemption code for the App Store. When you download an app using a redemption code, you own it, even though your organization purchased it for you. 168 Draft APPLE CONFIDENTIAL Your organization can also purchase App Store app licenses that they assign to you for a period of time, but that the organization retains. Youll be invited to participate in your organizations program in order to access these apps. After youre enrolled with your iTunes account, youre prompted to install these apps as theyre assigned to you. You can also find them in your Purchased list in the App Store. An app you receive this way is removed if the organization assigns it to someone else. Your organization might also develop custom apps that arent in the App Store. Youll install them from a webpage or, if your organization uses mobile device management, youll receive a notification asking you to install them over the air. These apps belong to your organization, and they may be removed or stop working if you delete a configuration profile or dissociate iPhone from the mobile device management server. Appendix C iPhone in Business 169 Draft APPLE CONFIDENTIAL Safety, Handling, & Support D x i d n e p p A Important safety information WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injuries, or damage to iPhone or other property. Read all the safety information below before using iPhone. Handling Handle iPhone with care. It is made of metal, glass, and plastic and has sensitive electronic components inside. iPhone can be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquid. Dont use a damaged iPhone, such as one with a cracked screen, as it may cause injury. If youre concerned about scratching the surface of iPhone, consider using a case or cover. Repairing Dont open iPhone and dont attempt to repair iPhone by yourself. Disassembling iPhone may damage it or may cause injury to you. If iPhone is damaged, malfunctions, or comes in contact with liquid, contact Apple or an Apple Authorized Service Provider. You can find more information about getting service at www.apple.com/support/iphone/service/faq. Battery Dont attempt to replace the iPhone battery yourselfyou may damage the battery, which could cause overheating and injury. The lithium-ion battery in iPhone should be replaced only by Apple or an Apple Authorized Service Provider, and must be recycled or disposed of separately from household waste. Dont incinerate the battery. For information about battery recycling and replacement, see www.apple.com/batteries. Distraction Using iPhone in some circumstances can distract you and may cause a dangerous situation. Observe rules that prohibit or restrict the use of mobile phones or headphones (for example, avoid texting while driving a car or using headphones while riding a bicycle). Navigation Maps, directions, Flyover, and location-based apps depend on data services. Charging Charge iPhone with the included USB cable and power adapter, or with other third-

party Made for iPhone cables and power adapters that are compatible with USB 2.0, or power adapters compliant with one or more of the following standards: EN 301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITU L.1000, or another applicable mobile phone power adapter interoperability standard. An iPhone Micro USB Adapter (available separately in some areas) or other adapter may be needed to connect iPhone to some compatible power adapters. Using damaged cables or chargers, or charging when moisture is present, can cause electric shock. When you use the Apple USB Power Adapter to charge iPhone, make sure that the AC plug or AC power cord is fully inserted into the adapter before you plug it into a power outlet. Note: Only micro USB power adapters in certain regions that comply with applicable mobile phone power adapter interoperability standards are compatible. Please contact the power adapter manufacturer to find out if your micro USB power adapter complies with these standards. 170 Draft APPLE CONFIDENTIAL Lightning cable and connector Avoid prolonged skin contact with the connector when the Lightning cable is plugged into a power source because it may cause discomfort or injury. Situations such as sleeping or sitting on the Lightning connector should be avoided. Prolonged heat exposure iPhone and its power adapter comply with applicable surface temperature standards and limits. However, even within these limits, sustained contact with warm surfaces for long periods of time may cause discomfort or injury. Use common sense to avoid situations where your skin is in contact with a device or its power adapter when its operating or plugged into a power source for long periods of time. For example, dont sleep or place a device or power adapter under a blanket, pillow, or your body when its plugged into a power source. Its important to keep iPhone and its power adapter in a well-ventilated area when using or charging them. Take special care if you have a physical condition that affects your ability to detect heat against the body. Hearing loss Listening to sound at high volumes may damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem quieter than they actually are. Use only compatible receivers, earbuds, headphones, speakerphones, or earpieces with your device. Turn on the audio and check the volume before inserting anything in your ear. For more information about hearing loss, see www.apple.com/sound. For information about how to set a maximum volume limit on iPhone, see Music settings on page 70. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. Apple headsets The headsets sold with iPhone 4s or later in China (identifiable by dark insulating rings on the plug) are designed to comply with Chinese standards and are compatible with iPhone 4s or later, iPad 2 or later, and iPod touch 5th generation. Use only compatible headsets with your device. Radio signals iPhone uses radio signals to connect to wireless networks. For information about the amount of power used to transmit these signals, and about steps you can take to minimize exposure, see Settings > General > About > Legal > RF Exposure. Radio frequency interference Observe signs and notices that prohibit or restrict the use of mobile phones (for example, in healthcare facilities or blasting areas). Although iPhone is designed, tested, and manufactured to comply with regulations governing radio frequency emissions, such emissions from iPhone can negatively affect the operation of other electronic equipment, causing them to malfunction. Turn off iPhone or use Airplane Mode to turn off the iPhone wireless transmitters when use is prohibited, such as while traveling in aircraft, or when asked to do so by authorities. Medical devices iPhone contains radios that emit electromagnetic fields, and contains magnets near the bottom. The included headphones also have magnets in the earbuds. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain at least 6 inches (approximately 15 cm) of separation between your pacemaker or defibrillator and iPhone or the earbuds. If you suspect iPhone is interfering with your pacemaker or any other medical device, stop using iPhone and consult your physician for information specific to your medical device. Medical conditions If you have any other medical condition that you believe could be affected by iPhone (for example, seizures, blackouts, eyestrain, or headaches), consult with your physician prior to using iPhone. Appendix D Safety, Handling, & Support 171 Draft APPLE CONFIDENTIAL Explosive atmospheres Do not charge or use iPhone in any area with a potentially explosive atmosphere, such as a fueling area, or in areas where the air contains chemicals or particles (such as grain, dust, or metal powders). Obey all signs and instructions. Repetitive motion When you perform repetitive activities such as typing or playing games on iPhone, you may experience occasional discomfort in your hands, arms, wrists, shoulders, neck, or other parts of your body. If you experience discomfort, stop using iPhone and consult a physician. High-consequence activities This device is not intended for use where the failure of the device could lead to death, personal injury, or severe environmental damage. Choking hazard Some iPhone accessories may present a choking hazard to small children. Keep these accessories away from small children. Important handling information Cleaning Clean iPhone immediately if it comes in contact with anything that may cause stains such as dirt, ink, makeup, or lotions. To clean:

Disconnect all cables and turn iPhone off (press and hold the Sleep/Wake button, then slide the onscreen slider). Use a soft, lint-free cloth. Avoid getting moisture in openings. Dont use cleaning products or compressed air. The front or back cover of iPhone may be made of glass with a fingerprint-resistant oleophobic

(oil repellant) coating. This coating wears over time with normal usage. Cleaning products and abrasive materials will further diminish the coating, and may scratch the glass. Using connectors, ports, and buttons Never force a connector into a port or apply excessive pressure to a button, because this may cause damage that is not covered under the warranty. If the connector and port dont join with reasonable ease, they probably dont match. Check for obstructions and make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Lightning cable Discoloration of the Lightning plug after regular use is normal. Dirt, debris, and exposure to liquids may cause discoloration. To remove the discoloration or if the cable becomes warm during use or wont charge or sync your iPhone, disconnect the Lightning cable from your computer or power adapter and clean it with a soft, dry, lint-free cloth. Do not use liquids or cleaning products when cleaning the Lightning connector. Operating temperature iPhone is designed to work in ambient temperatures between 32 and 95 F (0 and 35 C) and stored in temperatures between -4 and 113 F (-20 and 45 C). iPhone can be damaged and battery life shortened if stored or operated outside of these temperature ranges. Avoid exposing iPhone to dramatic changes in temperature or humidity. When youre using iPhone or charging the battery, it is normal for iPhone to get warm. If the interior temperature of iPhone exceeds normal operating temperatures (for example, in a hot car or in direct sunlight for extended periods of time), you may experience the following as it attempts to regulate its temperature:

iPhone stops charging. The screen dims. Appendix D Safety, Handling, & Support 172 Draft APPLE CONFIDENTIAL A temperature warning screen appears. Some apps may close. Important: You may not be able to use iPhone while the temperature warning screen is displayed. If iPhone cant regulate its internal temperature, it goes into deep sleep mode until it cools. Move iPhone to a cooler location out of direct sunlight and wait a few minutes before trying to use iPhone again. For more information, see support.apple.com/kb/HT2101. iPhone Support site Comprehensive support information is available online at www.apple.com/support/iphone. To contact Apple for personalized support (not available in all areas), see www.apple.com/support/contact. Restart or reset iPhone If something isnt working right, try restarting iPhone, forcing an app to quit, or resetting iPhone. Restart iPhone. Hold down the Sleep/Wake button until the slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, hold down the Sleep/Wake button until the Apple logo appears. Force an app to quit. From the Home screen, double-click the Home button and swipe upwards on the app screen. If you cant turn off iPhone or if the problem continues, you may need to reset iPhone. Do this only if youre unable to restart your iPhone. Reset iPhone. Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. You can reset the network settings, keyboard dictionary, home screen layout, and location and privacy settings. You can also erase all of your content and settings. Reset iPhone settings Reset iPhone settings. Go to Settings > General > Reset, then choose an option:

Reset All Settings: All your preferences and settings are reset. Erase All Content and Settings: Your information, and settings are removed. iPhone cannot be used until its set up again. Reset Network Settings: When you reset network settings, previously used networks and VPN settings that werent installed by a configuration profile are removed. (To remove VPN settings installed by a configuration profile, go to Settings > General > Profile, then select the profile and tap Remove. This also removes other settings or accounts provided by the profile.) Wi-Fi is turned off and then back on, disconnecting you from any network youre on. The Wi-Fi and Ask to Join Networks settings remain turned on. Reset Keyboard Dictionary: You add words to the keyboard dictionary by rejecting words iPhone suggests as you type. Resetting the keyboard dictionary erases all words youve added. Reset Home Screen Layout: Returns the built-in apps to their original layout on the Home screen. Reset Location & Privacy: Resets the location services and privacy settings to their defaults. Appendix D Safety, Handling, & Support 173 Draft APPLE CONFIDENTIAL Get information about your iPhone See information about iPhone. Go to Settings > General > About. The items you can view include:

Name Network addresses Number of songs, videos, photos, and apps Capacity and available storage space iOS version Carrier Model number Serial number Wi-Fi and Bluetooth addresses IMEI (International Mobile Equipment Identity) ICCID (Integrated Circuit Card Identifier, or Smart Card) for GSM networks MEID (Mobile Equipment Identifier) for CDMA networks Modem firmware Legal (including legal notices and license, warranty, regulatory marks, and RF exposure information) To copy the serial number and other identifiers, touch and hold the identifier until Copy appears. To help Apple improve products and services, iPod touch sends diagnostic and usage data. This data doesnt personally identify you, but may include location information. View or turn off diagnostic information. Go to Settings > Privacy > Diagnostics & Usage. Usage information View cellular usage. Go to Settings > Cellular. See Cellular settings on page 176. View other usage information. Go to Settings > General > Usage to:

Display battery level as a percentage See Battery Usage, including the elapsed time since iPhone has been charged and usage by app View overall storage availability and storage used by app View and manage iCloud storage Disabled iPhone If iPhone is disabled because you forgot your passcode or entered an incorrect passcode too many times, you can restore iPhone from an iTunes or iCloud backup and reset the passcode. For more information, see Restore iPhone on page 176. If you get a message in iTunes that your iPhone is locked and you must enter a passcode, see support.apple.com/kb/HT1212. Appendix D Safety, Handling, & Support 174 Draft APPLE CONFIDENTIAL Back up iPhone You can use iCloud or iTunes to automatically back up iPhone. If you choose to back up using iCloud, you cant also use iTunes to automatically back up to your computer, but you can use iTunes to manually back up to your computer. iCloud backs up to iPhone daily over Wi-Fi, when its connected to a power source and is locked. The date and time of the last backup is listed at the bottom of the Backup screen. iCloud backs up your:

Purchased music, movies, TV shows, apps, and books Photos and videos taken with your iPhone (If you use iCloud Photo Library, your photos and videos are already stored in iCloud, so they wont also be part of an iCloud backup.) iPhone settings App data Home screen, folders, and app layout Messages (iMessage, SMS, and MMS) Ringtones Note: Purchased content is not backed up in all areas. Turn on iCloud backups. Go to Settings > iCloud, then log in with your Apple ID and password if required. Go to Backup, then turn on iCloud Backup. To turn on backups in iTunes, go to File >

Devices > Back Up. Back up immediately. Go to Settings > iCloud > Backup, then tap Back Up Now. Encrypt your backup. iCloud backups are encrypted automatically so that your data is protected from unauthorized access both while its transmitted to your devices and when its stored in iCloud. If youre using iTunes for your backup, select Encrypt iPhone backup in the iTunes Summary pane. Manage your backups. Go to Settings > iCloud. You can manage which apps are backed up to iCloud by tapping them on or off. Go to Settings > iCloud > Storage > Manage Storage to remove existing backups and manage Documents & Data. In iTunes, remove backups in iTunes Preferences. View the devices being backed up. Go to Settings > iCloud > Storage > Manage Storage. Stop iCloud backups. Go to Settings > iCloud > Backup, then turn off iCloud Backup. Music not purchased in iTunes isnt backed up in iCloud. Use iTunes to back up and restore that content. See Sync with iTunes on page 17. Important: Backups for music, movies, or TV show purchases are not available in all countries. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBooks Store. Purchased content and iCloud Photo Sharing content dont count against your 5 GB of free iCloud storage. For more information about backing up iPhone, see support.apple.com/kb/HT5262. Appendix D Safety, Handling, & Support 175 Draft APPLE CONFIDENTIAL Update and restore iPhone software About update and restore You can update iPhone software in Settings, or by using iTunes. You can also erase or restore iPhone, and then use iCloud or iTunes to restore from a backup. Update iPhone You can update software in iPhone Settings or by using iTunes. Update wirelessly on iPhone. Go to Settings > General > Software Update. iPhone checks for available software updates. Update software in iTunes. iTunes checks for available software updates each time you sync iPhone using iTunes. See Sync with iTunes on page 17. For more information about updating iPhone software, see support.apple.com/kb/HT4623. Restore iPhone You can use iCloud or iTunes to restore iPhone from a backup. Restore from an iCloud backup. Reset iPhone to erase all settings and information, then sign in to iCloud and choose Restore from a Backup in the Setup Assistant. See Restart or reset iPhone on page 173. Restore from an iTunes backup. Connect iPhone to the computer you normally sync with, select iPhone in the iTunes window, then click Restore in the Summary pane. When the iPhone software is restored, you can either set it up as a new iPhone, or restore your music, videos, app data, and other content from a backup. For more information about restoring iPhone software, see support.apple.com/kb/HT1414. Cellular settings Use Cellular settings to turn cellular data and roaming on or off, set which apps and services use cellular data, see call time and cellular data usage, and set other cellular options. If iPhone is connected to the Internet via the cellular data network, the LTE, 4G, 3G, E, or GPRS icon appears in the status bar. LTE, 4G, and 3G service on GSM cellular networks support simultaneous voice and data communications. For all other cellular connections, you cant use Internet services while youre talking on the phone unless iPhone also has a Wi-Fi connection to the Internet. Depending on your network connection, you may not be able to receive calls while iPhone transfers data over the cellular networkwhen downloading a webpage, for example. GSM networks: On an EDGE or GPRS connection, incoming calls may go directly to voicemail during data transfers. For incoming calls that you answer, data transfers are paused. CDMA networks: On EV-DO connections, data transfers are paused when you answer incoming calls. On 1xRTT connections, incoming calls may go directly to voicemail during data transfers. For incoming calls that you answer, data transfers are paused. Data transfer resumes when you end the call. Appendix D Safety, Handling, & Support 176 Draft APPLE CONFIDENTIAL If Cellular Data is off, all data services use only Wi-Fiincluding email, web browsing, push notifications, and other services. If Cellular Data is on, carrier charges may apply. For example, using certain features and services that transfer data, such as Siri and Messages, could result in charges to your data plan. Turn Cellular Data on or off. Go to Settings > Cellular. The following options may also be available:

Turn Voice Roaming on or off (CDMA): Turn Voice Roaming off to avoid charges from using other carriers networks. When your carriers network isnt available, iPhone wont have cellular (data or voice) service. Turn Data Roaming on or off: Data Roaming permits Internet access over a cellular data network when youre in an area not covered by your carriers network. When youre traveling, you can turn off Data Roaming to avoid roaming charges. See Phone settings on page 51. Enable or disable 3G: Using 3G loads Internet data faster in some cases, but may decrease battery performance. If youre making a lot of phone calls, you may want to turn 3G off to extend battery life. This option is not available in all areas. Set whether cellular data is used for apps and services. Go to Settings > Cellular, then turn cellular data on or off for any app that can use cellular data. If a setting is off, iPhone uses only Wi-Fi for that service. The iTunes setting includes both iTunes Match and automatic downloads from the iTunes Store and the App Store. Sell or give away iPhone?

Before you sell or give away your iPhone, be sure to erase all content and your personal information. If youve enabled Find My iPhone (see Find My iPhone on page 40), Activation Lock is on. You need to turn off Activation Lock before the new owner can activate iPhone under his or her own account. Erase iPhone and remove Activation Lock. Go to Settings > General > Reset > Erase All Content and Settings. See support.apple.com/kb/HT5661. Learn more, service, and support Refer to the following resources to get more iPhone-related safety, software, and service information. To learn about Using iPhone safely iPhone service and support, tips, forums, and Apple software downloads Do this See Important safety information on page 170. Go to www.apple.com/support/iphone. Service and support from your carrier Contact your carrier or go to your carriers website. The latest information about iPhone Go to www.apple.com/iphone. Managing your Apple ID account Using iCloud Using iTunes Go to appleid.apple.com. Go to help.apple.com/icloud. Open iTunes and choose Help > iTunes Help. For an online iTunes tutorial (may not be available in all areas), go to www.apple.com/support/itunes. Appendix D Safety, Handling, & Support 177 Draft APPLE CONFIDENTIAL To learn about Using other Apple iOS apps Do this Go to www.apple.com/support/ios. Finding your iPhone serial number, IMEI, ICCID, or MEID Obtaining warranty service Viewing iPhone regulatory information You can find your iPhone serial number, International Mobile Equipment Identity (IMEI), ICCD, or Mobile Equipment Identifier (MEID) on the iPhone packaging. Or, on iPhone, choose Settings > General > About. For more information, go to support.apple.com/kb/ht4061. First follow the advice in this guide. Then go to www.apple.com/support/iphone. On iPhone, go to Settings > General > About > Legal

> Regulatory. Battery replacement service Go to www.apple.com/batteries/replacements.html. Using iPhone in an enterprise environment Go to www.apple.com/iphone/business to learn more about the enterprise features of iPhone, including Microsoft Exchange, IMAP, CalDAV, CardDAV, VPN, and more. FCC compliance statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important: Changes or modifications to this product not authorized by Apple could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Appendix D Safety, Handling, & Support 178 Draft(cid:2)(cid:35)(cid:50)(cid:50)(cid:46)(cid:39)(cid:2)(cid:37)(cid:49)(cid:48)(cid:40)(cid:43)(cid:38)(cid:39)(cid:48)(cid:54)(cid:43)(cid:35)(cid:46)

(cid:2)

(cid:2)

(cid:2)

(cid:2)

(cid:2)

(cid:2) Canadian regulatory statement

(cid:54)(cid:74)(cid:75)(cid:85)(cid:2)(cid:70)(cid:71)(cid:88)(cid:75)(cid:69)(cid:71)(cid:2)(cid:69)(cid:81)(cid:79)(cid:82)(cid:78)(cid:75)(cid:71)(cid:85)(cid:2)(cid:89)(cid:75)(cid:86)(cid:74)(cid:2)(cid:43)(cid:80)(cid:70)(cid:87)(cid:85)(cid:86)(cid:84)(cid:91)(cid:2)(cid:37)(cid:67)(cid:80)(cid:67)(cid:70)(cid:67)(cid:2)(cid:78)(cid:75)(cid:69)(cid:71)(cid:80)(cid:69)(cid:71)(cid:15)(cid:71)(cid:90)(cid:71)(cid:79)(cid:82)(cid:86)(cid:2)(cid:52)(cid:53)(cid:53)(cid:2)(cid:85)(cid:86)(cid:67)(cid:80)(cid:70)(cid:67)(cid:84)(cid:70)(cid:10)(cid:85)(cid:11)(cid:16)(cid:2)(cid:49)(cid:82)(cid:71)(cid:84)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:2)(cid:75)(cid:85)(cid:2)(cid:85)(cid:87)(cid:68)(cid:76)(cid:71)(cid:69)(cid:86)(cid:2)

(cid:86)(cid:81)(cid:2)(cid:86)(cid:74)(cid:71)(cid:2)(cid:72)(cid:81)(cid:78)(cid:78)(cid:81)(cid:89)(cid:75)(cid:80)(cid:73)(cid:2)(cid:86)(cid:89)(cid:81)(cid:2)(cid:69)(cid:81)(cid:80)(cid:70)(cid:75)(cid:86)(cid:75)(cid:81)(cid:80)(cid:85)(cid:28)(cid:2)(cid:10)(cid:19)(cid:11)(cid:2)(cid:86)(cid:74)(cid:75)(cid:85)(cid:2)(cid:70)(cid:71)(cid:88)(cid:75)(cid:69)(cid:71)(cid:2)(cid:79)(cid:67)(cid:91)(cid:2)(cid:80)(cid:81)(cid:86)(cid:2)(cid:69)(cid:67)(cid:87)(cid:85)(cid:71)(cid:2)(cid:75)(cid:80)(cid:86)(cid:71)(cid:84)(cid:72)(cid:71)(cid:84)(cid:71)(cid:80)(cid:69)(cid:71)(cid:14)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:10)(cid:20)(cid:11)(cid:2)(cid:86)(cid:74)(cid:75)(cid:85)(cid:2)(cid:70)(cid:71)(cid:88)(cid:75)(cid:69)(cid:71)(cid:2)

(cid:79)(cid:87)(cid:85)(cid:86)(cid:2)(cid:67)(cid:69)(cid:69)(cid:71)(cid:82)(cid:86)(cid:2)(cid:67)(cid:80)(cid:91)(cid:2)(cid:75)(cid:80)(cid:86)(cid:71)(cid:84)(cid:72)(cid:71)(cid:84)(cid:71)(cid:80)(cid:69)(cid:71)(cid:14)(cid:2)(cid:75)(cid:80)(cid:69)(cid:78)(cid:87)(cid:70)(cid:75)(cid:80)(cid:73)(cid:2)(cid:75)(cid:80)(cid:86)(cid:71)(cid:84)(cid:72)(cid:71)(cid:84)(cid:71)(cid:80)(cid:69)(cid:71)(cid:2)(cid:86)(cid:74)(cid:67)(cid:86)(cid:2)(cid:79)(cid:67)(cid:91)(cid:2)(cid:69)(cid:67)(cid:87)(cid:85)(cid:71)(cid:2)(cid:87)(cid:80)(cid:70)(cid:71)(cid:85)(cid:75)(cid:84)(cid:71)(cid:70)(cid:2)(cid:81)(cid:82)(cid:71)(cid:84)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:2)(cid:81)(cid:72)(cid:2)

(cid:86)(cid:74)(cid:71)(cid:2)(cid:70)(cid:71)(cid:88)(cid:75)(cid:69)(cid:71)(cid:16)

(cid:49)(cid:82)(cid:71)(cid:84)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:2)(cid:75)(cid:80)(cid:2)(cid:86)(cid:74)(cid:71)(cid:2)(cid:68)(cid:67)(cid:80)(cid:70)(cid:2)(cid:23)(cid:19)(cid:23)(cid:18)(cid:15)(cid:23)(cid:20)(cid:23)(cid:18)(cid:2)(cid:47)(cid:42)(cid:92)(cid:2)(cid:75)(cid:85)(cid:2)(cid:81)(cid:80)(cid:78)(cid:91)(cid:2)(cid:72)(cid:81)(cid:84)(cid:2)(cid:75)(cid:80)(cid:70)(cid:81)(cid:81)(cid:84)(cid:2)(cid:87)(cid:85)(cid:71)(cid:2)(cid:86)(cid:81)(cid:2)(cid:84)(cid:71)(cid:70)(cid:87)(cid:69)(cid:71)(cid:2)(cid:86)(cid:74)(cid:71)(cid:2)(cid:82)(cid:81)(cid:86)(cid:71)(cid:80)(cid:86)(cid:75)(cid:67)(cid:78)(cid:2)(cid:72)(cid:81)(cid:84)(cid:2)(cid:74)(cid:67)(cid:84)(cid:79)(cid:72)(cid:87)(cid:78)(cid:2)

(cid:75)(cid:80)(cid:86)(cid:71)(cid:84)(cid:72)(cid:71)(cid:84)(cid:71)(cid:80)(cid:69)(cid:71)(cid:2)(cid:86)(cid:81)(cid:2)(cid:69)(cid:81)(cid:15)(cid:69)(cid:74)(cid:67)(cid:80)(cid:80)(cid:71)(cid:78)(cid:2)(cid:79)(cid:81)(cid:68)(cid:75)(cid:78)(cid:71)(cid:2)(cid:85)(cid:67)(cid:86)(cid:71)(cid:78)(cid:78)(cid:75)(cid:86)(cid:71)(cid:2)(cid:85)(cid:91)(cid:85)(cid:86)(cid:71)(cid:79)(cid:85)(cid:16)

(cid:55)(cid:85)(cid:71)(cid:84)(cid:85)(cid:2)(cid:67)(cid:84)(cid:71)(cid:2)(cid:67)(cid:70)(cid:88)(cid:75)(cid:85)(cid:71)(cid:70)(cid:2)(cid:86)(cid:74)(cid:67)(cid:86)(cid:2)(cid:74)(cid:75)(cid:73)(cid:74)(cid:15)(cid:82)(cid:81)(cid:89)(cid:71)(cid:84)(cid:2)(cid:84)(cid:67)(cid:70)(cid:67)(cid:84)(cid:85)(cid:2)(cid:67)(cid:84)(cid:71)(cid:2)(cid:67)(cid:78)(cid:78)(cid:81)(cid:69)(cid:67)(cid:86)(cid:71)(cid:70)(cid:2)(cid:67)(cid:85)(cid:2)(cid:82)(cid:84)(cid:75)(cid:79)(cid:67)(cid:84)(cid:91)(cid:2)(cid:87)(cid:85)(cid:71)(cid:84)(cid:85)(cid:2)(cid:10)(cid:75)(cid:16)(cid:71)(cid:16)(cid:14)(cid:2)(cid:82)(cid:84)(cid:75)(cid:81)(cid:84)(cid:75)(cid:86)(cid:91)(cid:2)(cid:87)(cid:85)(cid:71)(cid:84)(cid:85)(cid:11)(cid:2)(cid:81)(cid:72)(cid:2)(cid:86)(cid:74)(cid:71)(cid:2)

(cid:68)(cid:67)(cid:80)(cid:70)(cid:85)(cid:2)(cid:23)(cid:20)(cid:23)(cid:18)(cid:15)(cid:23)(cid:21)(cid:23)(cid:18)(cid:2)(cid:47)(cid:42)(cid:92)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:23)(cid:24)(cid:23)(cid:18)(cid:15)(cid:23)(cid:26)(cid:23)(cid:18)(cid:2)(cid:47)(cid:42)(cid:92)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:86)(cid:74)(cid:67)(cid:86)(cid:2)(cid:86)(cid:74)(cid:71)(cid:85)(cid:71)(cid:2)(cid:84)(cid:67)(cid:70)(cid:67)(cid:84)(cid:85)(cid:2)(cid:69)(cid:81)(cid:87)(cid:78)(cid:70)(cid:2)(cid:69)(cid:67)(cid:87)(cid:85)(cid:71)(cid:2)(cid:75)(cid:80)(cid:86)(cid:71)(cid:84)(cid:72)(cid:71)(cid:84)(cid:71)(cid:80)(cid:69)(cid:71)(cid:2)(cid:67)(cid:80)(cid:70)(cid:17)(cid:81)(cid:84)(cid:2)

(cid:70)(cid:67)(cid:79)(cid:67)(cid:73)(cid:71)(cid:2)(cid:86)(cid:81)(cid:2)(cid:46)(cid:39)(cid:15)(cid:46)(cid:35)(cid:48)(cid:2)(cid:70)(cid:71)(cid:88)(cid:75)(cid:69)(cid:71)(cid:85)(cid:16)

(cid:46)(cid:71)(cid:2)(cid:82)(cid:84)(cid:111)(cid:85)(cid:71)(cid:80)(cid:86)(cid:2)(cid:67)(cid:82)(cid:82)(cid:67)(cid:84)(cid:71)(cid:75)(cid:78)(cid:2)(cid:71)(cid:85)(cid:86)(cid:2)(cid:69)(cid:81)(cid:80)(cid:72)(cid:81)(cid:84)(cid:79)(cid:71)(cid:2)(cid:67)(cid:87)(cid:90)(cid:2)(cid:37)(cid:48)(cid:52)(cid:2)(cid:70)(cid:168)(cid:43)(cid:80)(cid:70)(cid:87)(cid:85)(cid:86)(cid:84)(cid:75)(cid:71)(cid:2)(cid:37)(cid:67)(cid:80)(cid:67)(cid:70)(cid:67)(cid:2)(cid:67)(cid:82)(cid:82)(cid:78)(cid:75)(cid:69)(cid:67)(cid:68)(cid:78)(cid:71)(cid:85)(cid:2)(cid:67)(cid:87)(cid:90)(cid:2)(cid:67)(cid:82)(cid:82)(cid:67)(cid:84)(cid:71)(cid:75)(cid:78)(cid:85)(cid:2)

(cid:84)(cid:67)(cid:70)(cid:75)(cid:81)(cid:2)(cid:71)(cid:90)(cid:71)(cid:79)(cid:82)(cid:86)(cid:85)(cid:2)(cid:70)(cid:71)(cid:2)(cid:78)(cid:75)(cid:69)(cid:71)(cid:80)(cid:69)(cid:71)(cid:16)(cid:2)(cid:46)(cid:168)(cid:71)(cid:90)(cid:82)(cid:78)(cid:81)(cid:75)(cid:86)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:2)(cid:71)(cid:85)(cid:86)(cid:2)(cid:67)(cid:87)(cid:86)(cid:81)(cid:84)(cid:75)(cid:85)(cid:111)(cid:71)(cid:2)(cid:67)(cid:87)(cid:90)(cid:2)(cid:70)(cid:71)(cid:87)(cid:90)(cid:2)(cid:69)(cid:81)(cid:80)(cid:70)(cid:75)(cid:86)(cid:75)(cid:81)(cid:80)(cid:85)(cid:2)(cid:85)(cid:87)(cid:75)(cid:88)(cid:67)(cid:80)(cid:86)(cid:71)(cid:85)(cid:28)(cid:2)(cid:10)(cid:19)(cid:11)(cid:2)

(cid:78)(cid:168)(cid:67)(cid:82)(cid:82)(cid:67)(cid:84)(cid:71)(cid:75)(cid:78)(cid:2)(cid:80)(cid:71)(cid:2)(cid:70)(cid:81)(cid:75)(cid:86)(cid:2)(cid:82)(cid:67)(cid:85)(cid:2)(cid:82)(cid:84)(cid:81)(cid:70)(cid:87)(cid:75)(cid:84)(cid:71)(cid:2)(cid:70)(cid:71)(cid:2)(cid:68)(cid:84)(cid:81)(cid:87)(cid:75)(cid:78)(cid:78)(cid:67)(cid:73)(cid:71)(cid:14)(cid:2)(cid:71)(cid:86)(cid:2)(cid:10)(cid:20)(cid:11)(cid:2)(cid:78)(cid:168)(cid:87)(cid:86)(cid:75)(cid:78)(cid:75)(cid:85)(cid:67)(cid:86)(cid:71)(cid:87)(cid:84)(cid:2)(cid:70)(cid:71)(cid:2)(cid:78)(cid:168)(cid:67)(cid:82)(cid:82)(cid:67)(cid:84)(cid:71)(cid:75)(cid:78)(cid:2)(cid:70)(cid:81)(cid:75)(cid:86)(cid:2)(cid:67)(cid:69)(cid:69)(cid:71)(cid:82)(cid:86)(cid:71)(cid:84)(cid:2)(cid:86)(cid:81)(cid:87)(cid:86)(cid:2)

(cid:68)(cid:84)(cid:81)(cid:87)(cid:75)(cid:78)(cid:78)(cid:67)(cid:73)(cid:71)(cid:2)(cid:84)(cid:67)(cid:70)(cid:75)(cid:81)(cid:111)(cid:78)(cid:71)(cid:69)(cid:86)(cid:84)(cid:75)(cid:83)(cid:87)(cid:71)(cid:2)(cid:85)(cid:87)(cid:68)(cid:75)(cid:14)(cid:2)(cid:79)(cid:113)(cid:79)(cid:71)(cid:2)(cid:85)(cid:75)(cid:2)(cid:78)(cid:71)(cid:2)(cid:68)(cid:84)(cid:81)(cid:87)(cid:75)(cid:78)(cid:78)(cid:67)(cid:73)(cid:71)(cid:2)(cid:71)(cid:85)(cid:86)(cid:2)(cid:85)(cid:87)(cid:85)(cid:69)(cid:71)(cid:82)(cid:86)(cid:75)(cid:68)(cid:78)(cid:71)(cid:2)(cid:70)(cid:168)(cid:71)(cid:80)(cid:2)(cid:69)(cid:81)(cid:79)(cid:82)(cid:84)(cid:81)(cid:79)(cid:71)(cid:86)(cid:86)(cid:84)(cid:71)(cid:2)

(cid:78)(cid:71)(cid:2)(cid:72)(cid:81)(cid:80)(cid:69)(cid:86)(cid:75)(cid:81)(cid:80)(cid:80)(cid:71)(cid:79)(cid:71)(cid:80)(cid:86)(cid:16)

(cid:46)(cid:67)(cid:2)(cid:68)(cid:67)(cid:80)(cid:70)(cid:71)(cid:2)(cid:23)(cid:2)(cid:19)(cid:23)(cid:18)(cid:15)(cid:23)(cid:2)(cid:20)(cid:23)(cid:18)(cid:2)(cid:47)(cid:42)(cid:92)(cid:2)(cid:71)(cid:85)(cid:86)(cid:2)(cid:84)(cid:111)(cid:85)(cid:71)(cid:84)(cid:88)(cid:111)(cid:85)(cid:2)(cid:87)(cid:80)(cid:75)(cid:83)(cid:87)(cid:71)(cid:79)(cid:71)(cid:80)(cid:86)(cid:2)(cid:82)(cid:81)(cid:87)(cid:84)(cid:2)(cid:87)(cid:80)(cid:71)(cid:2)(cid:87)(cid:86)(cid:75)(cid:78)(cid:75)(cid:85)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:2)(cid:105)(cid:2)(cid:78)(cid:168)(cid:75)(cid:80)(cid:86)(cid:111)(cid:84)(cid:75)(cid:71)(cid:87)(cid:84)(cid:2)(cid:67)(cid:176)(cid:80)(cid:2)(cid:70)(cid:71)(cid:2)

(cid:84)(cid:111)(cid:70)(cid:87)(cid:75)(cid:84)(cid:71)(cid:2)(cid:78)(cid:71)(cid:85)(cid:2)(cid:84)(cid:75)(cid:85)(cid:83)(cid:87)(cid:71)(cid:85)(cid:2)(cid:70)(cid:71)(cid:2)(cid:68)(cid:84)(cid:81)(cid:87)(cid:75)(cid:78)(cid:78)(cid:67)(cid:73)(cid:71)(cid:2)(cid:82)(cid:84)(cid:111)(cid:76)(cid:87)(cid:70)(cid:75)(cid:69)(cid:75)(cid:67)(cid:68)(cid:78)(cid:71)(cid:2)(cid:67)(cid:87)(cid:90)(cid:2)(cid:85)(cid:91)(cid:85)(cid:86)(cid:112)(cid:79)(cid:71)(cid:85)(cid:2)(cid:70)(cid:71)(cid:2)(cid:85)(cid:67)(cid:86)(cid:71)(cid:78)(cid:78)(cid:75)(cid:86)(cid:71)(cid:85)(cid:2)(cid:79)(cid:81)(cid:68)(cid:75)(cid:78)(cid:71)(cid:85)(cid:2)(cid:87)(cid:86)(cid:75)(cid:78)(cid:75)(cid:85)(cid:67)(cid:80)(cid:86)(cid:2)(cid:78)(cid:71)(cid:85)(cid:2)

(cid:79)(cid:113)(cid:79)(cid:71)(cid:85)(cid:2)(cid:69)(cid:67)(cid:80)(cid:67)(cid:87)(cid:90)(cid:16)

(cid:46)(cid:71)(cid:85)(cid:2)(cid:87)(cid:86)(cid:75)(cid:78)(cid:75)(cid:85)(cid:67)(cid:86)(cid:71)(cid:87)(cid:84)(cid:85)(cid:2)(cid:113)(cid:86)(cid:71)(cid:85)(cid:2)(cid:67)(cid:88)(cid:75)(cid:85)(cid:111)(cid:85)(cid:2)(cid:83)(cid:87)(cid:71)(cid:2)(cid:78)(cid:71)(cid:85)(cid:2)(cid:87)(cid:86)(cid:75)(cid:78)(cid:75)(cid:85)(cid:67)(cid:86)(cid:71)(cid:87)(cid:84)(cid:85)(cid:2)(cid:70)(cid:71)(cid:2)(cid:84)(cid:67)(cid:70)(cid:67)(cid:84)(cid:85)(cid:2)(cid:70)(cid:71)(cid:2)(cid:74)(cid:67)(cid:87)(cid:86)(cid:71)(cid:2)(cid:82)(cid:87)(cid:75)(cid:85)(cid:85)(cid:67)(cid:80)(cid:69)(cid:71)(cid:2)(cid:85)(cid:81)(cid:80)(cid:86)(cid:2)(cid:70)(cid:111)(cid:85)(cid:75)(cid:73)(cid:80)(cid:111)(cid:85)(cid:2)

(cid:87)(cid:86)(cid:75)(cid:78)(cid:75)(cid:85)(cid:67)(cid:86)(cid:71)(cid:87)(cid:84)(cid:85)(cid:2)(cid:82)(cid:84)(cid:75)(cid:80)(cid:69)(cid:75)(cid:82)(cid:67)(cid:87)(cid:90)(cid:2)(cid:10)(cid:69)(cid:16)(cid:15)(cid:105)(cid:15)(cid:70)(cid:16)(cid:14)(cid:2)(cid:83)(cid:87)(cid:168)(cid:75)(cid:78)(cid:85)(cid:2)(cid:81)(cid:80)(cid:86)(cid:2)(cid:78)(cid:67)(cid:2)(cid:82)(cid:84)(cid:75)(cid:81)(cid:84)(cid:75)(cid:86)(cid:111)(cid:11)(cid:2)(cid:82)(cid:81)(cid:87)(cid:84)(cid:2)(cid:78)(cid:71)(cid:85)(cid:2)(cid:68)(cid:67)(cid:80)(cid:70)(cid:71)(cid:85)(cid:2)(cid:23)(cid:2)(cid:20)(cid:23)(cid:18)(cid:15)(cid:23)(cid:2)(cid:21)(cid:23)(cid:18)(cid:2)(cid:47)(cid:42)(cid:92)(cid:2)(cid:71)(cid:86)(cid:2)(cid:23)(cid:2)(cid:24)(cid:23)(cid:18)(cid:15)(cid:23)(cid:2)

(cid:26)(cid:23)(cid:18)(cid:2)(cid:47)(cid:42)(cid:92)(cid:2)(cid:71)(cid:86)(cid:2)(cid:83)(cid:87)(cid:71)(cid:2)(cid:69)(cid:71)(cid:85)(cid:2)(cid:84)(cid:67)(cid:70)(cid:67)(cid:84)(cid:85)(cid:2)(cid:82)(cid:81)(cid:87)(cid:84)(cid:84)(cid:67)(cid:75)(cid:71)(cid:80)(cid:86)(cid:2)(cid:69)(cid:67)(cid:87)(cid:85)(cid:71)(cid:84)(cid:2)(cid:70)(cid:87)(cid:2)(cid:68)(cid:84)(cid:81)(cid:87)(cid:75)(cid:78)(cid:78)(cid:67)(cid:73)(cid:71)(cid:2)(cid:71)(cid:86)(cid:17)(cid:81)(cid:87)(cid:2)(cid:70)(cid:71)(cid:85)(cid:2)(cid:70)(cid:81)(cid:79)(cid:79)(cid:67)(cid:73)(cid:71)(cid:85)(cid:2)(cid:67)(cid:87)(cid:90)(cid:2)(cid:70)(cid:75)(cid:85)(cid:82)(cid:81)(cid:85)(cid:75)(cid:86)(cid:75)(cid:72)(cid:85)(cid:2)

(cid:46)(cid:35)(cid:48)(cid:15)(cid:39)(cid:46)(cid:16) Appendix A Safety, Handling, & Support 179 Draft(cid:2)(cid:35)(cid:50)(cid:50)(cid:46)(cid:39)(cid:2)(cid:37)(cid:49)(cid:48)(cid:40)(cid:43)(cid:38)(cid:39)(cid:48)(cid:54)(cid:43)(cid:35)(cid:46)

(cid:37)(cid:35)(cid:48)(cid:2)(cid:43)(cid:37)(cid:39)(cid:53)(cid:15)(cid:21)(cid:2)(cid:10)(cid:36)(cid:11)(cid:17)(cid:48)(cid:47)(cid:36)(cid:15)(cid:21)(cid:10)(cid:36)(cid:11) Disposal and recycling information Apple Recycling Program (available in some areas): (cid:40)(cid:81)(cid:84)(cid:2)(cid:72)(cid:84)(cid:71)(cid:71)(cid:2)(cid:84)(cid:71)(cid:69)(cid:91)(cid:69)(cid:78)(cid:75)(cid:80)(cid:73)(cid:2)(cid:81)(cid:72)(cid:2)(cid:91)(cid:81)(cid:87)(cid:84)(cid:2)(cid:81)(cid:78)(cid:70)(cid:2)(cid:79)(cid:81)(cid:68)(cid:75)(cid:78)(cid:71)(cid:2)(cid:82)(cid:74)(cid:81)(cid:80)(cid:71)(cid:14)(cid:2)

(cid:67)(cid:2)(cid:82)(cid:84)(cid:71)(cid:82)(cid:67)(cid:75)(cid:70)(cid:2)(cid:85)(cid:74)(cid:75)(cid:82)(cid:82)(cid:75)(cid:80)(cid:73)(cid:2)(cid:78)(cid:67)(cid:68)(cid:71)(cid:78)(cid:14)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:75)(cid:80)(cid:85)(cid:86)(cid:84)(cid:87)(cid:69)(cid:86)(cid:75)(cid:81)(cid:80)(cid:85)(cid:14)(cid:2)(cid:85)(cid:71)(cid:71)(cid:2)(cid:89)(cid:89)(cid:89)(cid:16)(cid:67)(cid:82)(cid:82)(cid:78)(cid:71)(cid:16)(cid:69)(cid:81)(cid:79)(cid:17)(cid:84)(cid:71)(cid:69)(cid:91)(cid:69)(cid:78)(cid:75)(cid:80)(cid:73)(cid:16) iPhone disposal and recycling: (cid:59)(cid:81)(cid:87)(cid:2)(cid:79)(cid:87)(cid:85)(cid:86)(cid:2)(cid:70)(cid:75)(cid:85)(cid:82)(cid:81)(cid:85)(cid:71)(cid:2)(cid:81)(cid:72)(cid:2)(cid:75)(cid:50)(cid:74)(cid:81)(cid:80)(cid:71)(cid:2)(cid:82)(cid:84)(cid:81)(cid:82)(cid:71)(cid:84)(cid:78)(cid:91)(cid:2)(cid:67)(cid:69)(cid:69)(cid:81)(cid:84)(cid:70)(cid:75)(cid:80)(cid:73)(cid:2)(cid:86)(cid:81)(cid:2)(cid:78)(cid:81)(cid:69)(cid:67)(cid:78)(cid:2)(cid:78)(cid:67)(cid:89)(cid:85)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)

(cid:84)(cid:71)(cid:73)(cid:87)(cid:78)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:85)(cid:16)(cid:2)(cid:36)(cid:71)(cid:69)(cid:67)(cid:87)(cid:85)(cid:71)(cid:2)(cid:75)(cid:50)(cid:74)(cid:81)(cid:80)(cid:71)(cid:2)(cid:69)(cid:81)(cid:80)(cid:86)(cid:67)(cid:75)(cid:80)(cid:85)(cid:2)(cid:71)(cid:78)(cid:71)(cid:69)(cid:86)(cid:84)(cid:81)(cid:80)(cid:75)(cid:69)(cid:2)(cid:69)(cid:81)(cid:79)(cid:82)(cid:81)(cid:80)(cid:71)(cid:80)(cid:86)(cid:85)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:67)(cid:2)(cid:68)(cid:67)(cid:86)(cid:86)(cid:71)(cid:84)(cid:91)(cid:14)(cid:2)(cid:75)(cid:50)(cid:74)(cid:81)(cid:80)(cid:71)(cid:2)(cid:79)(cid:87)(cid:85)(cid:86)(cid:2)(cid:68)(cid:71)(cid:2)

(cid:70)(cid:75)(cid:85)(cid:82)(cid:81)(cid:85)(cid:71)(cid:70)(cid:2)(cid:81)(cid:72)(cid:2)(cid:85)(cid:71)(cid:82)(cid:67)(cid:84)(cid:67)(cid:86)(cid:71)(cid:78)(cid:91)(cid:2)(cid:72)(cid:84)(cid:81)(cid:79)(cid:2)(cid:74)(cid:81)(cid:87)(cid:85)(cid:71)(cid:74)(cid:81)(cid:78)(cid:70)(cid:2)(cid:89)(cid:67)(cid:85)(cid:86)(cid:71)(cid:16)(cid:2)(cid:57)(cid:74)(cid:71)(cid:80)(cid:2)(cid:75)(cid:50)(cid:74)(cid:81)(cid:80)(cid:71)(cid:2)(cid:84)(cid:71)(cid:67)(cid:69)(cid:74)(cid:71)(cid:85)(cid:2)(cid:75)(cid:86)(cid:85)(cid:2)(cid:71)(cid:80)(cid:70)(cid:2)(cid:81)(cid:72)(cid:2)(cid:78)(cid:75)(cid:72)(cid:71)(cid:14)(cid:2)(cid:69)(cid:81)(cid:80)(cid:86)(cid:67)(cid:69)(cid:86)(cid:2)(cid:78)(cid:81)(cid:69)(cid:67)(cid:78)(cid:2)

(cid:67)(cid:87)(cid:86)(cid:74)(cid:81)(cid:84)(cid:75)(cid:86)(cid:75)(cid:71)(cid:85)(cid:2)(cid:86)(cid:81)(cid:2)(cid:78)(cid:71)(cid:67)(cid:84)(cid:80)(cid:2)(cid:67)(cid:68)(cid:81)(cid:87)(cid:86)(cid:2)(cid:70)(cid:75)(cid:85)(cid:82)(cid:81)(cid:85)(cid:67)(cid:78)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:84)(cid:71)(cid:69)(cid:91)(cid:69)(cid:78)(cid:75)(cid:80)(cid:73)(cid:2)(cid:81)(cid:82)(cid:86)(cid:75)(cid:81)(cid:80)(cid:85)(cid:14)(cid:2)(cid:81)(cid:84)(cid:2)(cid:85)(cid:75)(cid:79)(cid:82)(cid:78)(cid:91)(cid:2)(cid:70)(cid:84)(cid:81)(cid:82)(cid:2)(cid:75)(cid:86)(cid:2)(cid:81)(cid:210)(cid:2)(cid:67)(cid:86)(cid:2)(cid:91)(cid:81)(cid:87)(cid:84)(cid:2)(cid:78)(cid:81)(cid:69)(cid:67)(cid:78)(cid:2)(cid:35)(cid:82)(cid:82)(cid:78)(cid:71)(cid:2)

(cid:84)(cid:71)(cid:86)(cid:67)(cid:75)(cid:78)(cid:2)(cid:85)(cid:86)(cid:81)(cid:84)(cid:71)(cid:2)(cid:81)(cid:84)(cid:2)(cid:84)(cid:71)(cid:86)(cid:87)(cid:84)(cid:80)(cid:2)(cid:75)(cid:86)(cid:2)(cid:86)(cid:81)(cid:2)(cid:35)(cid:82)(cid:82)(cid:78)(cid:71)(cid:16)(cid:2)(cid:54)(cid:74)(cid:71)(cid:2)(cid:68)(cid:67)(cid:86)(cid:86)(cid:71)(cid:84)(cid:91)(cid:2)(cid:89)(cid:75)(cid:78)(cid:78)(cid:2)(cid:68)(cid:71)(cid:2)(cid:84)(cid:71)(cid:79)(cid:81)(cid:88)(cid:71)(cid:70)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:84)(cid:71)(cid:69)(cid:91)(cid:69)(cid:78)(cid:71)(cid:70)(cid:2)(cid:75)(cid:80)(cid:2)(cid:67)(cid:80)(cid:2)(cid:71)(cid:80)(cid:88)(cid:75)(cid:84)(cid:81)(cid:80)(cid:79)(cid:71)(cid:80)(cid:86)(cid:67)(cid:78)(cid:78)(cid:91)(cid:2)

(cid:72)(cid:84)(cid:75)(cid:71)(cid:80)(cid:70)(cid:78)(cid:91)(cid:2)(cid:79)(cid:67)(cid:80)(cid:80)(cid:71)(cid:84)(cid:16)(cid:2)(cid:40)(cid:81)(cid:84)(cid:2)(cid:79)(cid:81)(cid:84)(cid:71)(cid:2)(cid:75)(cid:80)(cid:72)(cid:81)(cid:84)(cid:79)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:14)(cid:2)(cid:85)(cid:71)(cid:71)(cid:2)(cid:89)(cid:89)(cid:89)(cid:16)(cid:67)(cid:82)(cid:82)(cid:78)(cid:71)(cid:16)(cid:69)(cid:81)(cid:79)(cid:17)(cid:84)(cid:71)(cid:69)(cid:91)(cid:69)(cid:78)(cid:75)(cid:80)(cid:73)(cid:16) Battery replacement: (cid:54)(cid:74)(cid:71)(cid:2)(cid:78)(cid:75)(cid:86)(cid:74)(cid:75)(cid:87)(cid:79)(cid:15)(cid:75)(cid:81)(cid:80)(cid:2)(cid:68)(cid:67)(cid:86)(cid:86)(cid:71)(cid:84)(cid:91)(cid:2)(cid:75)(cid:80)(cid:2)(cid:75)(cid:50)(cid:74)(cid:81)(cid:80)(cid:71)(cid:2)(cid:85)(cid:74)(cid:81)(cid:87)(cid:78)(cid:70)(cid:2)(cid:68)(cid:71)(cid:2)(cid:84)(cid:71)(cid:82)(cid:78)(cid:67)(cid:69)(cid:71)(cid:70)(cid:2)(cid:81)(cid:80)(cid:78)(cid:91)(cid:2)(cid:68)(cid:91)(cid:2)(cid:35)(cid:82)(cid:82)(cid:78)(cid:71)(cid:2)

(cid:81)(cid:84)(cid:2)(cid:67)(cid:80)(cid:2)(cid:35)(cid:82)(cid:82)(cid:78)(cid:71)(cid:2)(cid:35)(cid:87)(cid:86)(cid:74)(cid:81)(cid:84)(cid:75)(cid:92)(cid:71)(cid:70)(cid:2)(cid:53)(cid:71)(cid:84)(cid:88)(cid:75)(cid:69)(cid:71)(cid:2)(cid:50)(cid:84)(cid:81)(cid:88)(cid:75)(cid:70)(cid:71)(cid:84)(cid:14)(cid:2)(cid:67)(cid:80)(cid:70)(cid:2)(cid:79)(cid:87)(cid:85)(cid:86)(cid:2)(cid:68)(cid:71)(cid:2)(cid:84)(cid:71)(cid:69)(cid:91)(cid:69)(cid:78)(cid:71)(cid:70)(cid:2)(cid:81)(cid:84)(cid:2)(cid:70)(cid:75)(cid:85)(cid:82)(cid:81)(cid:85)(cid:71)(cid:70)(cid:2)(cid:81)(cid:72)(cid:2)(cid:85)(cid:71)(cid:82)(cid:67)(cid:84)(cid:67)(cid:86)(cid:71)(cid:78)(cid:91)(cid:2)

(cid:72)(cid:84)(cid:81)(cid:79)(cid:2)(cid:74)(cid:81)(cid:87)(cid:85)(cid:71)(cid:74)(cid:81)(cid:78)(cid:70)(cid:2)(cid:89)(cid:67)(cid:85)(cid:86)(cid:71)(cid:16)(cid:2)(cid:40)(cid:81)(cid:84)(cid:2)(cid:79)(cid:81)(cid:84)(cid:71)(cid:2)(cid:75)(cid:80)(cid:72)(cid:81)(cid:84)(cid:79)(cid:67)(cid:86)(cid:75)(cid:81)(cid:80)(cid:2)(cid:67)(cid:68)(cid:81)(cid:87)(cid:86)(cid:2)(cid:68)(cid:67)(cid:86)(cid:86)(cid:71)(cid:84)(cid:91)(cid:2)(cid:84)(cid:71)(cid:82)(cid:78)(cid:67)(cid:69)(cid:71)(cid:79)(cid:71)(cid:80)(cid:86)(cid:2)(cid:85)(cid:71)(cid:84)(cid:88)(cid:75)(cid:69)(cid:71)(cid:85)(cid:14)(cid:2)(cid:73)(cid:81)(cid:2)(cid:86)(cid:81)(cid:2)

(cid:74)(cid:86)(cid:86)(cid:82)(cid:28)(cid:17)(cid:17)(cid:89)(cid:89)(cid:89)(cid:16)(cid:67)(cid:82)(cid:82)(cid:78)(cid:71)(cid:16)(cid:69)(cid:81)(cid:79)(cid:17)(cid:68)(cid:67)(cid:86)(cid:86)(cid:71)(cid:84)(cid:75)(cid:71)(cid:85)(cid:16)

(cid:37)(cid:67)(cid:78)(cid:75)(cid:72)(cid:81)(cid:84)(cid:80)(cid:75)(cid:67)(cid:2)(cid:36)(cid:67)(cid:86)(cid:86)(cid:71)(cid:84)(cid:91)(cid:2)(cid:37)(cid:74)(cid:67)(cid:84)(cid:73)(cid:71)(cid:84)(cid:2)(cid:39)(cid:80)(cid:71)(cid:84)(cid:73)(cid:91)(cid:2)(cid:39)(cid:211)(cid:69)(cid:75)(cid:71)(cid:80)(cid:69)(cid:91) Trkiye

(cid:54)(cid:128)(cid:84)(cid:77)(cid:75)(cid:91)(cid:71)(cid:2)(cid:37)(cid:87)(cid:79)(cid:74)(cid:87)(cid:84)(cid:75)(cid:91)(cid:71)(cid:86)(cid:75)(cid:28)(cid:2)EEE Ynetmeliine Uygundur. Taiwan Battery Statement China Battery Statement

(cid:2)

(cid:2)

(cid:2)

(cid:2) Appendix A Safety, Handling, & Support 179b Draft APPLE CONFIDENTIAL European UnionDisposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Union Europeenneinformations sur lelimination: Le symbole ci-dessus signifie que, conformment aux lois et rglementations locales, vous devez jeter votre produit et/

ou sa batterie sparment des ordures mnagres. Lorsque ce produit arrive en fin de vie, apportez-le un point de collecte dsign par les autorits locales. La collecte spare et le recyclage de votre produit et/ou de sa batterie lors de sa mise au rebut aideront prserver les ressources naturelles et sassurer quil est recycl de manire protger la sant humaine et lenvironnement. Europaische UnionInformationen zur Entsorgung: Das oben aufgefhrte Symbol weist darauf hin, dass dieses Produkt und/oder die damit verwendete Batterie den geltenden gesetzlichen Vorschriften entsprechend und vom Hausmll getrennt entsorgt werden muss. Geben Sie dieses Produkt zur Entsorgung bei einer offiziellen Sammelstelle ab. Durch getrenntes Sammeln und Recycling werden die Rohstoffreserven geschont und es ist sichergestellt, dass beim Recycling des Produkts und/oder der Batterie alle Bestimmungen zum Schutz von Gesundheit und Umwelt eingehalten werden. Unione Europeainformazioni per lo smaltimento: Il simbolo qui sopra significa che, in base alle leggi e alle normative locali, il prodotto e/o la sua batteria dovrebbero essere riciclati separatamente dai rifiuti domestici. Quando il prodotto diventa inutilizzabile, portalo nel punto di raccolta stabilito dalle autorit locali. La raccolta separata e il riciclaggio del prodotto e/o della sua batteria al momento dello smaltimento aiutano a conservare le risorse naturali e assicurano che il riciclaggio avvenga nel rispetto della salute umana e dellambiente. Europeiska unioneninformation om kassering: Symbolen ovan betyder att produkten och/eller dess batteri enligt lokala lagar och bestmmelser inte fr kastas tillsammans med hushllsavfallet. Nr produkten har tjnat ut mste den tas till en tervinningsstation som utsetts av lokala myndigheter. Genom att lta den uttjnta produkten och/eller dess batteri tas om hand fr tervinning hjlper du till att spara naturresurser och skydda hlsa och milj. BrasilInformacoes sobre descarte e reciclagem O smbolo indica que este produto e/ou sua bateria no devem ser descartadas no lixo domstico. Quando decidir descartar este produto e/ou sua bateria, faa-o de acordo com as leis e diretrizes ambientais locais. Para informaes sobre substncias de uso restrito, o programa de reciclagem da Apple, pontos de coleta e telefone de informaes, visite www.apple.com/br/environment. Appendix D Safety, Handling, & Support 180 Draft APPLE CONFIDENTIAL Informacin sobre eliminacin de residuos y reciclaje El smbolo indica que este producto y/o su batera no debe desecharse con los residuos domsticos. Cuando decida desechar este producto y/o su batera, hgalo de conformidad con las leyes y directrices ambientales locales. Para obtener informacin sobre el programa de reciclaje de Apple, puntos de recoleccin para reciclaje, sustancias restringidas y otras iniciativas ambientales, visite www.apple.com/la/environment. Apple and the environment At Apple, we recognize our responsibility to minimize the environmental impacts of our operations and products. For more information, go to www.apple.com/environment. Appendix D Safety, Handling, & Support 181 Draft APPLE CONFIDENTIAL K Apple Inc. 2014 Apple Inc. All rights reserved. Apple, the Apple logo, AirDrop, AirPlay, AirPort, Aperture, Apple TV, FaceTime, Finder, Guided Access, iBooks, iCal, iMessage, iMovie, iPad, iPhone, iPhoto, iPod, iPod touch, iSight, iTunes, Keychain, Mac, OS X, Passbook, Safari, Siri, Spotlight, Time Capsule, and the Works with iPhone logo are trademarks of Apple Inc., registered in the U.S. and other countries. AirPrint, EarPods, Flyover, Lightning, the Made for iPhone logo, Multi-Touch, and Touch ID are trademarks of Apple Inc. Apple Store, Genius, iAd, iCloud, iTunes Extras, iTunes Match, iTunes Plus, iTunes Store, iTunes U, and the Podcast logo are service marks of Apple Inc., registered in the U.S. and other countries. App Store, iBooks Store, and iTunes Radio are service marks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. NIKE and the Swoosh Design are trademarks of NIKE, Inc. and its affiliates, and are used under license. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. Adobe and Photoshop are trademarks or registered trademarks of Adobe Systems Incorporated in the U.S. and/or other countries. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. All understandings, agreements, or warranties, if any, take place directly between the vendors and the prospective users. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. 019-00038 /2014 Draft

 

 

A1549 Multi-Touch panel and LCD display removed Apple Proprietary and Confidential A1549 Multi-Touch panel and LCD display - Front Apple Proprietary and Confidential A1549 Multi-Touch panel and LCD display - Back Apple Proprietary and Confidential A1549 Earpiece - Front Apple Proprietary and Confidential A1549 Earpiece - Back Apple Proprietary and Confidential

 

 

A1549 Flex assembly with FaceTime camera, Microphone - Front Apple Proprietary and Confidential A1549 Flex assembly with FaceTime camera, Microphone - Back Apple Proprietary and Confidential A1549 Internal View Wi-Fi (5GHz) Antenna structure GPS/Wi-Fi/BT/NFC/Secondary Cellular Antenna structure MLB Battery UICC Card slot Headphone Jack Lightning Connector Speaker Assembly Primary Cellular Antenna structure Apple Proprietary and Confidential A1549 Rear Camera - Front Apple Proprietary and Confidential A1549 Rear Camera - Back Apple Proprietary and Confidential

 

 

A1549 Speaker assembly - Front Apple Proprietary and Confidential A1549 Speaker assembly - Back Apple Proprietary and Confidential A1549 Flex assembly with Headphone jack, Microphone, Lightning connector, Primary Cellular antenna feed - Front Apple Proprietary and Confidential A1549 Flex assembly with Headphone jack, Microphone, Lightning connector, Primary Cellular antenna feed - Back Apple Proprietary and Confidential A1549 Battery - Front Apple Proprietary and Confidential

 

 

A1549 Battery - Back Apple Proprietary and Confidential A1549 MLB with shields - Front Apple Proprietary and Confidential A1549 MLB with shields - Back Apple Proprietary and Confidential A1549 MLB without shields - Front Apple Proprietary and Confidential A1549 MLB without shields - Back Apple Proprietary and Confidential

 

 

Multi-Touch panel and LCD display removed A1586A1586Apple Proprietary and Confidential Multi-Touch panel and LCD display - Front A1586Apple Proprietary and Confidential Multi-Touch panel and LCD display - Back A1586Apple Proprietary and Confidential Earpiece - Front A1586Apple Proprietary and Confidential Earpiece - Back A1586Apple Proprietary and Confidential

 

 

Flex assembly with FaceTime camera, Microphone - Front A1586Apple Proprietary and Confidential Flex assembly with FaceTime camera, Microphone - Back A1586Apple Proprietary and Confidential Internal View Wi-Fi (5GHz) Antenna structure GPS/Wi-Fi/BT/NFC/Secondary Cellular Antenna structure MLB UICC Card slot Speaker Assembly Primary Cellular Antenna structure Battery Headphone Jack Lightning Connector A1586AppleProprietary and Confidential Rear Camera - Front A1586Apple Proprietary and Confidential Rear Camera - Back A1586Apple Proprietary and Confidential

 

 

Speaker assembly - Front A1586Apple Proprietary and Confidential Speaker assembly - Back A1586Apple Proprietary and Confidential Flex assembly with Headphone jack, Microphone, Lightning connector, Primary Cellular antenna feed - Front A1586Apple Proprietary and Confidential Flex assembly with Headphone jack, Microphone, Lightning connector, Primary Cellular antenna feed - Back A1586Apple Proprietary and Confidential Battery - Front A1586Apple Proprietary and Confidential

 

 

Battery - Back A1586Apple Proprietary and Confidential MLB with shields - Front A1586Apple Proprietary and Confidential MLB with shields - Back A1586Apple Proprietary and Confidential MLB without shields - Front A1586Apple Proprietary and Confidential MLB without shields - Back A1586Apple Proprietary and Confidential

 

 

A1549 - Front Face Multi-Touch panel, LCD display, Earpiece receiver, FaceTime camera, Home button Apple Proprietary and Confidential A1549 - Right Side UICC card tray, Sleep/Wake button Apple Proprietary and Confidential A1549 - Top Side Apple Proprietary and Confidential A1549 - Left Side Ring/Silent switch, Volume buttons Apple Proprietary and Confidential A1549 - Bottom Side Headphone jack, Microphone, Lightning connector, Speaker Apple Proprietary and Confidential A1549 - Back Plate Rear Camera, Microphone, Flash Light Apple Proprietary and Confidential

 

 

A1586 - Front Face Multi-Touch panel, LCD display, Earpiece receiver, FaceTime camera, Home button Apple Proprietary and Confidential A1586 - Right Side UICC card tray, Sleep/Wake button Apple Proprietary and Confidential A1586 - Top Side Apple Proprietary and Confidential A1586 - Left Side Ring/Silent switch, Volume buttons Apple Proprietary and Confidential A1586 - Bottom Side Speaker, Lightning connector, Microphone, Headphone jack Apple Proprietary and Confidential A1586 - Back Plate Rear Camera, Microphone, Flash Light Apple Proprietary and Confidential

 

 

Label Location Model: A1549 FCC ID: BCG-E2816A IC ID: 579C-E2816A NOTICE OF PROPRIETARY PROPERTY. THE INFORMATION CONTAINED HEREIN IS THE PROPRIETARY PROPERTY OF APPLE INC. THE POSSESSOR AGREES TO THE FOLLOWING: (i) TO MAINTAIN THIS DOCUMENT IN CONFIDENCE,

(ii) NOT TO REPRODUCE OR COPY IT (iii) NOT TO REVEAL OR PUBLISH IT IN WHOLE OR PART. Apple Proprietary and Confidential

 

 

Label Location Model: A1586 FCC ID: BCG-E2816A IC ID: 579C-E2816A NOTICE OF PROPRIETARY PROPERTY. THE INFORMATION CONTAINED HEREIN IS THE PROPRIETARY PROPERTY OF APPLE INC. THE POSSESSOR AGREES TO THE FOLLOWING: (i) TO MAINTAIN THIS DOCUMENT IN CONFIDENCE,

(ii) NOT TO REPRODUCE OR COPY IT (iii) NOT TO REVEAL OR PUBLISH IT IN WHOLE OR PART. Apple Proprietary and Confidential

 

 

 

 

 

 

SAR EVALUATION REPORT FCC 47 CFR 2.1093 IEEE Std 1528-2003 For Cellular Phone with Bluetooth and WLAN Radio Model: A1586, A1549 FCC ID: BCG-E2816A Report Number: 14U17673-S1C Issue Date: 8/15/2014 Prepared for APPLE INC. 1 INFINITE LOOP, MS 26A CUPERTINO, CA 95014-2084 Prepared by UL Verification Services Inc. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 NVLAP LAB CODE 200065-0 Issue Date: 8/15/2014 Revised By

--

Kenneth Mak Report No.: 14U17673-S1C REVISION HISTORY Rev. Issue Date Revisions

--

A B C 7/24/2014 Initial Issue 8/1/2014 Report revised based on reviewers comments:

1. Sec. 1: Updated table. 2. Sec. 6.1.: Updated description. 3. Sec. 6.2, 6.3., 6.4., 6.5.: Updated table. 4. Sec. 6.7.: Removed diagram. 5. Sec. 8.: Removed note. 6. Sec. 8.1.: Revised note. 7. Sec. 8.3.: Removed 1xAdvanced. 8. Sec. 8.4.1., 8.4.2., 8.4.3., & 8.4.6.: Updated tables. 9. Sec. 8.7.: Updated tables. 10. Sec. 11.18., 11.19.: Updated tables. 11. Sec. 11.21: Added worst case spot check SAR for A1549. 12. Sec. 13: Revised simultaneous transmission SAR tables. 8/11/2014 1. Sec. 11.17.2.: Updated table to show all channels 8/15/2014 Report revised based on reviewers comments:

1. Added Section 10.3. SAR Scan Procedure Kenneth Mak Kenneth Mak UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 2 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 Table of Contents 1. 2. 3. 4. Attestation of Test Results ......................................................................................................... 8 Test Specification, Methods and Procedures ............................................................................ 9 Facilities and Accreditation ........................................................................................................ 9 SAR Measurement System & Test Equipment ........................................................................ 10 4.1. SAR Measurement System ...................................................................................................... 10 4.2. Test Equipment ........................................................................................................................ 11 5. 6. Measurement Uncertainty ......................................................................................................... 13 Device Under Test (DUT) Information ...................................................................................... 14 6.1. DUT Description ...................................................................................................................... 14 6.2. Wireless Technologies ............................................................................................................. 15 6.3. Maximum Output Power .......................................................................................................... 16 6.4. Simultaneous Transmission Condition ..................................................................................... 18 6.5. General LTE SAR Test and Reporting Considerations ............................................................. 19 6.6. LTE (TDD) Considerations ....................................................................................................... 21 6.7. Antenna Dimensions and Separation Distances ...................................................................... 22 7. RF Exposure Conditions (Test Configurations) ...................................................................... 23 7.1. Head ........................................................................................................................................ 23 7.2. Body-worn Accessory .............................................................................................................. 23 7.3. Wireless Router (Hotspot) ........................................................................................................ 24 7.4. Airplay ..................................................................................................................................... 24 8. Conducted Output Power Measurements ................................................................................ 25 8.1. GSM850 and GSM1900 ........................................................................................................... 25 8.2. W-CDMA Band V, IV, and II ..................................................................................................... 27 8.3. CDMA BC0, BC1, BC10, and BC15 ......................................................................................... 35 8.4. LTE Bands 2, 4, 5, 13, 17, 25, 26, & 41 ................................................................................... 38 8.4.1. LTE Band 2 ....................................................................................................................... 38 8.4.2. LTE Band 4 ....................................................................................................................... 44 8.4.3. LTE Band 5 ....................................................................................................................... 50 8.4.4. LTE Band 13 ..................................................................................................................... 54 8.4.5. LTE Band 17 ..................................................................................................................... 56 8.4.6. LTE Band 25 ..................................................................................................................... 58 8.4.7. LTE Band 26 ..................................................................................................................... 64 8.4.8. LTE Band 41 ..................................................................................................................... 66 8.5. LTE Rel. 10 Carrier Aggregation .............................................................................................. 78 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 3 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 8.6. Wi-Fi (2.4 GHz Band) ............................................................................................................... 79 8.6.1. PCell_ON (Plow) ...................................................................................................................... 79 8.6.2. PCell_OFF (Pmax) .................................................................................................................... 80 8.7. Wi-Fi (5 GHz Bands) ................................................................................................................ 81 8.7.1. Head Power Table ............................................................................................................ 81 8.7.2. Body Power Table ............................................................................................................ 84 8.8. Bluetooth ................................................................................................................................. 87 9. Dielectric Property Measurements ........................................................................................... 88 9.1. Tissue Dielectric Parameters ................................................................................................... 88 9.2. Dielectric Property Measurements Results .............................................................................. 89 10. System Check & SAR Scan Procedure .................................................................................. 104 10.1. Reference Target SAR Values ........................................................................................... 104 10.2. System Check Results ....................................................................................................... 105 10.3. SAR Scan Procedure ......................................................................................................... 111 11. Measured and Reported (Scaled) SAR Results ..................................................................... 113 Measured SAR Results for Model A1586 ......................................................................................... 114 11.1. GSM850 ............................................................................................................................. 114 11.1.1. Head ........................................................................................................................... 114 11.1.2. Body-worn Accessory .................................................................................................. 114 11.1.3. Hotspot........................................................................................................................ 114 11.2. GSM1900 ........................................................................................................................... 115 11.2.1. Head ........................................................................................................................... 115 11.2.2. Body-worn Accessory .................................................................................................. 115 11.2.3. Hotspot........................................................................................................................ 116 11.3. W-CDMA Band V ............................................................................................................... 117 11.3.1. Head ........................................................................................................................... 117 11.3.2. Body-worn Accessory & Hotspot ................................................................................. 117 11.4. W-CDMA Band IV .............................................................................................................. 118 11.4.1. Head ........................................................................................................................... 118 11.4.2. Body-worn Accessory & Hotspot ................................................................................. 118 11.5. W-CDMA Band II ................................................................................................................ 119 11.5.1. Head ........................................................................................................................... 119 11.5.2. Body-worn Accessory & Hotspot ................................................................................. 119 11.6. CDMA BC0......................................................................................................................... 120 11.6.1. Head ........................................................................................................................... 120 11.6.2. Body-worn Accessory & Hotspot ................................................................................. 121 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 4 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 11.7. CDMA BC1......................................................................................................................... 123 11.7.1. Head ........................................................................................................................... 123 11.7.2. Body-worn Accessory & Hotspot ................................................................................. 124 11.8. CDMA BC10 ....................................................................................................................... 125 11.8.1. Head ........................................................................................................................... 125 11.8.2. Body-worn Accessory & Hotspot ................................................................................. 125 11.9. CDMA BC15 ....................................................................................................................... 126 11.9.1. Head ........................................................................................................................... 126 11.9.2. Body-worn Accessory & Hotspot ................................................................................. 127 11.10. LTE Band 2 (20MHz Bandwidth) ........................................................................................ 128 11.10.1. Head ........................................................................................................................... 128 11.10.2. Body-worn Accessory & Hotspot ................................................................................. 128 11.11. LTE Band 4 (20MHz Bandwidth) ........................................................................................ 130 11.11.1. Head ........................................................................................................................... 130 11.11.2. Body-worn Accessory & Hotspot ................................................................................. 130 11.12. LTE Band 5 (10MHz Bandwidth) ........................................................................................ 132 11.12.1. Head ........................................................................................................................... 132 11.12.2. Body-worn Accessory & Hotspot ................................................................................. 132 11.13. LTE Band 13 (10MHz Bandwidth) ...................................................................................... 133 11.13.1. Head ........................................................................................................................... 133 11.13.2. Body-worn Accessory & Hotspot ................................................................................. 133 11.14. LTE Band 17 (10MHz Bandwidth) ...................................................................................... 134 11.14.1. Head ........................................................................................................................... 134 11.14.2. Body-worn Accessory & Hotspot ................................................................................. 134 11.15. LTE Band 25 (20MHz Bandwidth) ...................................................................................... 135 11.15.1. Head ........................................................................................................................... 135 11.15.2. Body-worn Accessory & Hotspot ................................................................................. 135 11.16. LTE Band 26 (10MHz Bandwidth) ...................................................................................... 137 12.16.1. Head ........................................................................................................................... 137 12.16.2. Body-worn Accessory & Hotspot ................................................................................. 137 11.17. LTE Band 41 (20MHz Bandwidth) ...................................................................................... 138 11.17.1. Head ........................................................................................................................... 138 11.17.2. Body-worn Accessory & Hotspot ................................................................................. 138 11.18. Wi-Fi 2.4GHz ...................................................................................................................... 140 11.18.1. Head (PCell_ON) ............................................................................................................. 140 11.18.2. Head (PCell_OFF) ............................................................................................................ 140 11.18.3. Body-worn Accessory & Hotspot (PCell_ON) ................................................................... 141 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 5 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 11.18.4. Body-worn Accessory & Hotspot (PCell_OFF) .................................................................. 141 11.19. Wi-Fi 5GHz......................................................................................................................... 142 11.19.1. Head ........................................................................................................................... 142 11.19.2. Body-worn Accessory & Airplay .................................................................................. 143 11.19.3. 802.11ac Mode ........................................................................................................... 143 11.20. Bluetooth ............................................................................................................................ 144 11.20.1. Body-worn Accessory .................................................................................................. 144 Measured SAR Results for Model A1549 ......................................................................................... 145 11.21. Worst Case Spot Check ..................................................................................................... 145 12. SAR Measurement Variability ................................................................................................. 146 12.1. The Highest Measured SAR Configuration in Each Frequency Band ................................. 146 12.2. Repeated Measurement Results ........................................................................................ 147 13. Simultaneous Transmission SAR Analysis ........................................................................... 148 13.1. Sum of the SAR for GSM850 (UAT) + Wi-Fi DTS & UNII Band & BT ................................. 149 13.2. Sum of the SAR for GSM850 (LAT) + Wi-Fi DTS & UNII Band & BT .................................. 150 13.3. Sum of the SAR for GSM1900 (UAT) + Wi-Fi DTS & UNII Band & BT ............................... 151 13.4. Sum of the SAR for GSM1900 (LAT) + Wi-Fi DTS & UNII Band & BT ................................ 152 13.5. Sum of the SAR for W-CDMA Band V (UAT) + Wi-Fi DTS & UNII Band & BT .................... 154 13.6. Sum of the SAR for W-CDMA Band V (LAT) + Wi-Fi DTS & UNII Band & BT..................... 155 13.7. Sum of the SAR for W-CDMA Band IV (UAT) + Wi-Fi DTS & UNII Band & BT ................... 156 13.8. Sum of the SAR for W-CDMA Band IV (LAT) + Wi-Fi DTS & UNII Band & BT .................... 157 13.9. Sum of the SAR for W-CDMA Band II (UAT) + Wi-Fi DTS & UNII Band & BT .................... 158 13.10. Sum of the SAR for W-CDMA Band II (LAT) + Wi-Fi DTS & UNII Band & BT ..................... 159 13.11. Sum of the SAR for CDMA BC0 (UAT) + Wi-Fi DTS & UNII Band & BT ............................. 163 13.12. Sum of the SAR for CDMA BC0 (LAT) + Wi-Fi DTS & UNII Band & BT .............................. 164 13.13. Sum of the SAR for CDMA BC1 (UAT) + Wi-Fi DTS & UNII Band & BT ............................. 165 13.14. Sum of the SAR for CDMA BC1 (LAT) + Wi-Fi DTS & UNII Band & BT .............................. 166 13.15. Sum of the SAR for CDMA BC10 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 169 13.16. Sum of the SAR for CDMA BC10 (LAT) + Wi-Fi DTS & UNII Band & BT ............................ 170 13.17. Sum of the SAR for CDMA BC15 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 171 13.18. Sum of the SAR for CDMA BC15 (LAT) + Wi-Fi DTS & UNII Band & BT ............................ 172 13.19. Sum of the SAR for LTE Band 2 (UAT) + Wi-Fi DTS & UNII Band & BT ............................. 173 13.20. Sum of the SAR for LTE Band 2 (LAT) + Wi-Fi DTS & UNII Band & BT ............................. 174 13.21. Sum of the SAR for LTE Band 4 (UAT) + Wi-Fi DTS & UNII Band & BT ............................. 176 13.22. Sum of the SAR for LTE Band 4 (LAT) + Wi-Fi DTS & UNII Band & BT ............................. 177 13.23. Sum of the SAR for LTE Band 5 (UAT) + Wi-Fi DTS & UNII Band & BT ............................. 179 13.24. Sum of the SAR for LTE Band 5 (LAT) + Wi-Fi DTS & UNII Band & BT ............................. 180 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 6 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.25. Sum of the SAR for LTE Band 13 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 181 13.26. Sum of the SAR for LTE Band 13 (LAT) + Wi-Fi DTS & UNII Band & BT ........................... 182 13.27. Sum of the SAR for LTE Band 17 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 183 13.28. Sum of the SAR for LTE Band 17 (LAT) + Wi-Fi DTS & UNII Band & BT ........................... 184 13.29. Sum of the SAR for LTE Band 25 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 185 13.30. Sum of the SAR for LTE Band 25 (LAT) + Wi-Fi DTS & UNII Band & BT ........................... 186 13.31. Sum of the SAR for LTE Band 26 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 188 13.32. Sum of the SAR for LTE Band 26 (LAT) + Wi-Fi DTS & UNII Band & BT ........................... 189 13.33. Sum of the SAR for LTE Band 41 (UAT) + Wi-Fi DTS & UNII Band & BT ........................... 190 13.34. Sum of the SAR for LTE Band 41 (LAT) + Wi-Fi DTS & UNII Band & BT ........................... 191 14. Appendixes .............................................................................................................................. 193 14.1. Photos ................................................................................................................................ 193 14.2. System Performance Check Plots ...................................................................................... 193 14.3. Highest SAR Test Plots ...................................................................................................... 193 14.4. Calibration Certificate for E-Field Probe EX3DV4 - SN 3885 .............................................. 193 14.5. Calibration Certificate for E-Field Probe EX3DV4 - SN 3751 .............................................. 193 14.6. Calibration Certificate for E-Field Probe EX3DV4 - SN 3749 .............................................. 193 14.7. Calibration Certificate for E-Field Probe EX3DV4 - SN 3901 .............................................. 193 14.8. Calibration Certificate for E-Field Probe EX3DV4 - SN 3772 .............................................. 193 14.9. Calibration Certificate for E-Field Probe EX3DV4 - SN 3686 .............................................. 193 14.10. Calibration Certificate for E-Field Probe EX3DV4 - SN 3989 .............................................. 193 14.11. Calibration Certificate for E-Field Probe EX3DV4 - SN 3990 .............................................. 193 14.12. Calibration Certificate for D750V3 - SN 1024 ..................................................................... 193 14.13. Calibration Certificate for D835V2 - SN 4d142 ................................................................... 193 14.14. Calibration Certificate for D1750V2- SN 1050 ................................................................... 193 14.15. Calibration Certificate for D1750V2- SN 1053 ................................................................... 193 14.16. Calibration Certificate for D1900V2- SN 5d140 ................................................................. 193 14.17. Calibration Certificate for D1900V2- SN 5d163 ................................................................. 193 14.18. Calibration Certificate for D2450V2 - SN 748 ..................................................................... 193 14.19. Calibration Certificate for D2450V2 - SN 706 ..................................................................... 193 14.20. Calibration Certificate for D2600V2 - SN 1036 ................................................................... 193 14.21. Calibration Certificate for D5GHzV2 - SN 1003 .................................................................. 193 14.22. Calibration Certificate for D5GHzV2 - SN 1168 .................................................................. 193 14.23. Tissue Material Ingredients ................................................................................................ 193 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 7 of 193 Report No.: 14U17673-S1C 1. Attestation of Test Results Applicant Name APPLE INC. FCC ID BCG-E2816A Issue Date: 8/15/2014 DUT Description Cellular Phone with Bluetooth and WLAN Radio Exposure Category General Population/Uncontrolled Exposure (1g SAR limit: 1.6 W/kg) The highest reported SAR RF Exposure Conditions Head Equipment Class Licensed 1.18 W/kg DTS UNII 1.150 W/kg 0.490 W/kg Body-worn Accessory 1.18 W/kg 1.150 W/kg 0.404 W/kg Wireless Router (Hotspot) 1.18 W/kg 1.150 W/kg 0.404 W/kg Simultaneous Transmission Head: 1.508 W/kg Head: 1.508 W/kg Head: 1.476 W/kg Body: 1.583 W/kg Body: 1.581 W/kg Body: 1.583 W/kg Applicable Standards FCC 47 CFR 2.1093 Published RF exposure KDB procedures IEEE Std 1528-2013 Test Results Pass Date tested 6/19/2014 7/18/2014 UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government (NIST Handbook 150, Annex A). This report is written to support regulatory compliance of the applicable standards stated above. Approved & Released By:

Prepared By:

Bobby Bayani Senior Engineer Kenneth Mak Laboratory Engineer UL Verification Services Inc. UL Verification Services Inc. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 8 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 2. Test Specification, Methods and Procedures The tests documented in this report were performed in accordance with FCC 47 CFR 2.1093, IEEE STD 1528-

2003, the following FCC Published RF exposure KDB procedures, and TCB workshop updates:

o 447498 D01 General RF Exposure Guidance v05r02 o 648474 D04 Handset SAR v01r02 o 941225 D01 SAR test for 3G devices v02 o 941225 D02 HSPA and 1x Advanced v02r02 o 941225 D03 SAR Test Reduction GSM GPRS EDGE v01 o 941225 D04 SAR for GSM E GPRS Dual Xfer Mode v01 o 941225 D05 SAR for LTE Devices v02r03 o 941225 D05A LTE Rel.10 KDB Inquiry Sheet v01 o 941225 D06 Hotspot Mode SAR v01r01 o 248227 D01 SAR Meas for 802 11abg v01r02 o 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r03 o 865664 D02 SAR Reporting v01r01 o 690783 D01 SAR Listings on Grants v01r03 3. Facilities and Accreditation The test sites and measurement facilities used to collect data are located at 47173 Benicia Street 47266 Benicia Street SAR Lab A SAR Lab B SAR Lab C SAR Lab D SAR Lab E SAR Lab F SAR Lab G SAR Lab H SAR Lab 1 SAR Lab 2 SAR Lab 3 SAR Lab 4 SAR Lab 5 UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://www.ccsemc.com. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 9 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 4. SAR Measurement System & Test Equipment 4.1. SAR Measurement System The DASY5 system used for performing compliance tests consists of the following items:

A standard high precision 6-axis robot with controller, teach pendant and software. An arm extension for accommodating the data acquisition electronics (DAE). An isotropic Field probe optimized and calibrated for the targeted measurement. A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing, AD-

conversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is battery powered with standard or rechargeable batteries. The signal is optically transmitted to the EOC. The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the digital communication to the DAE. To use optical surface detection, a special version of the EOC is required. The EOC signal is transmitted to the measurement server. The function of the measurement server is to perform the time critical tasks such as signal filtering, control of the robot operation and fast movement interrupts. The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe positioning. A computer running WinXP or Win7 and the DASY5 software. Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps, etc. The phantom, the device holder and other accessories according to the targeted measurement. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 10 of 193 Report No.: 14U17673-S1C 4.2. Test Equipment Issue Date: 8/15/2014 The measuring equipment used to perform the tests documented in this report has been calibrated in accordance with the manufacturers recommendations, and is traceable to recognized national standards. Dielectric Property Measurements System Check UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 11 of 193 Name of EquipmentManufacturerType/ModelSerial No.Cal. Due DateNetwork AnalyzerAgilent8753ESMY400016477/11/2014Network AnalyzerAgilentE8363C1391298J12/3/2014Dielectronic Probe kitSPEAGDAK-3.510829/10/2014Dielectronic Probe kitSPEAGDAK-3.5 ShortSM DAK 200 BAN/AThermometerControl Company42421225291629/19/2014Name of EquipmentManufacturerType/ModelSerial No.Cal. Due DateSynthesized Signal GeneratorHP8665B3744A010845/20/2015Power MeterAgilentN1912AMY500010188/23/2014Power SensorAgilentE9323AMY530700055/1/2015Power SensorAgilentE9323AUS404115568/9/2014AmplifierMITEQAMF-4D-00400600-50-30P1795093N/ADirectional couplerWerlatoneC8060-1022149N/ADC Power SupplyAMETEKXT 20-31318A00530N/ASynthesized Signal GeneratorHP8665B3744A011553/12/2015Power MeterHP437B3125U113648/26/2014Power MeterHP437B3125U123457/29/2014Power SensorHP8481A1926A270487/29/2014Power SensorHP8481A2702A762239/17/2014AmplifierMITEQAMF-4D-00400600-50-30P1795092N/ADirectional couplerWerlatoneC8060-1022141N/ADC Power SupplyBK PRECISION1611215-02292N/AE-Field ProbeSPEAGEX3DV438859/18/2014E-Field ProbeSPEAGEX3DV4375111/21/2014E-Field ProbeSPEAGEX3DV437491/29/2015E-Field ProbeSPEAGEX3DV439012/25/2015E-Field ProbeSPEAGEX3DV437722/26/2015E-Field ProbeSPEAGEX3DV436863/18/2015E-Field ProbeSPEAGEX3DV439894/15/2015E-Field ProbeSPEAGEX3DV439904/15/2015Data Acquisition Electronics SPEAGDAE412591/23/2015Data Acquisition Electronics SPEAGDAE413572/17/2015Data Acquisition Electronics SPEAGDAE413603/17/2015Data Acquisition Electronics SPEAGDAE414334/14/2015Data Acquisition Electronics SPEAGDAE414344/14/2015Data Acquisition Electronics SPEAGDAE412394/15/2015Data Acquisition Electronics SPEAGDAE35005/15/2015Data Acquisition Electronics SPEAGDAE412585/15/2015System Validation DipoleSPEAGD750V310245/16/2015System Validation DipoleSPEAGD835V24d1429/17/2014System Validation DipoleSPEAGD1750V210504/22/2015System Validation DipoleSPEAGD1750V210538/27/2014System Validation DipoleSPEAGD1900V25d1404/23/2015System Validation DipoleSPEAGD1900V25d1639/17/2014System Validation DipoleSPEAGD2450V27482/18/2015System Validation DipoleSPEAGD2450V27065/20/2015System Validation DipoleSPEAGD2600V210363/12/2015System Validation DipoleSPEAGD5GHzV210032/26/2015System Validation DipoleSPEAGD5GHzV2116812/12/2014 Report No.: 14U17673-S1C Others Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 12 of 193 Name of EquipmentManufacturerType/ModelSerial No.Cal. Due DateBase Station SimulatorR & SCMU2008381147/23/2014Base Station SimulatorR & SCMW500124593-ss7/25/2014Base Station SimulatorR & SCMW500113915-da8/14/2014Base Station SimulatorR & SCMW500135390-ws7/3/2015Base Station SimulatorR & SCMW500132911-tu2/27/2015Base Station SimulatorR & SCMW500103766-ly8/19/2014Base Station SimulatorR & SCMW500112268-rf6/6/2015Power MeterAgilentN1911AMY530600095/5/2015Power SensorAgilentE9323AUS4041168110/4/2014 Report No.: 14U17673-S1C 5. Measurement Uncertainty Issue Date: 8/15/2014 Per KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz, when the highest measured 1-g SAR within a frequency band is < 1.5 W/kg, the extensive SAR measurement uncertainty analysis described in IEEE Std 1528-

2003 is not required in SAR reports submitted for equipment approval. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 13 of 193 Report No.: 14U17673-S1C 6. Device Under Test (DUT) Information 6.1. DUT Description The device is the next generation iPhone. Issue Date: 8/15/2014 For operational and marketing reasons, there will be two models, A1586 and A1549. Model A1586 is a mobile phone with multimedia functions (music, application support, and video), Cellular GSM/GPRS/EGPRS/CDMA2000 1x Advanced/EVDO Rev.A/EVDO Rev.B/WCDMA/HSPA+/DC-HSDPA/LTE FDD &

Carrier Aggregation/TDD/TD-SCDMA radio, IEEE 802.11a/b/g/n/ac radio, Bluetooth radio and NFC. The rechargeable battery is not user accessible. Model A1549 is identical to Model A1586 and has the same MLB as Model A1586, but with TD-LTE/TD-SCDMA components de-populated. This device has two antennas. The Primary Cellular Antenna (LAT) is located on the bottom edge of the device and the Secondary Cellular Antenna (UAT) is located on the top edge of the device. The device is capable of switching between the LAT and UAT based on signal strength. The antenna switching is implemented with a physical, break-before-make switch such that only one antenna can be used for cellular transmission at a time. There are three vendors of the WiFi/Bluetooth radio modules: Variant 1, Variant 2 and Variant 3 and they have the same mechanical outline, same on board antenna, matching circuit, antenna structure and same specification. Complete SAR evaluation is performed on the Variant 3 that has the highest SAR, and then, the test is repeated for the other variants at the highest peak SAR value. Device Dimension Overall (Length x Width): 138.1mm x 67mm Overall Diagonal: 147mm Display Diagonal: 120mm Battery Back Cover The rechargeable battery is not user accessible. Battery Options The rechargeable battery is not user accessible. Accessory Headset Wireless Router (Hotspot) Wi-Fi Hotspot mode permits the device to share its cellular data connection with other Wi-Fi-enabled devices. Mobile Hotspot (Wi-Fi 2.4 GHz with PCell_ON = PLow) Mobile Hotspot (Wi-Fi 5 GHz) AirPlay AirPlay mode enabled devices transfer data directly between each other AirPlay (Wi-Fi 2.4 GHz) AirPlay (Wi-Fi 5 GHz) UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 14 of 193 Report No.: 14U17673-S1C 6.2. Wireless Technologies Issue Date: 8/15/2014 Wireless technologies Frequency bands Operating mode Duty Cycle used for SAR testing GSM 850, 1900 Voice (GMSK), GSM Voice: 12.5%;

GPRS Multi-Slot Class:

Class 8 - One Up Class 10 - Two Up Class 12 - Four Up GPRS (GMSK) and EGPRS (8PSK) GPRS 1 Slot: 12.5%; 2 Slots: 25%

CDMA2000 BC0, BC1, BC10, and 1xRTT (Voice & Data) DTM (Dual Transfer Mode): Not support BC15 1xEV-DO Rel. 0 1xEV-DO Rev. A 1xRTT: 100%

1xEV-DO Rel. 0: 100%

1xEV-DO Rev. B: 100%

Does this device SV-DO (1xRTT-1xEVDO)? Yes No 1xEV-DO Rev. B (BC0 only) W-CDMA (UMTS) Band V, IV, and II UMTS Rel. 99 (Voice & Data) Rel. 99: 100%

HSDPA (Rel. 7, CAT 14) HSUPA (Rel. 6, CAT 6) DC-HSDPA (Rel. 8, CAT 24) HSPA+ (Rel. 6, CAT 6) LTE (FDD) Band 2 / 4 / 5/ 13 / 17 QPSK, 16QAM 100%

/ 25 / 26 Rel. 10 Carrier Aggregation (1 Uplink and 2 Does this device SV-LTE (1xRTT-LTE)? Yes No Downlinks) LTE (TDD) Band 41 QPSK, 16QAM Wi-Fi

(Only for model A1586) 2.4 GHz 802.11b 802.11g 802.11n (HT20) 5 GHz 802.11a 802.11n (HT20) 802.11n (HT40) 802.11ac (HT20) 802.11ac (HT40) 802.11ac (HT80) 63.3%

100%

100%

Bluetooth 2.4 GHz Version 1.2 77.52% (DH5) Version 2.0 + EDR Version 2.1 + EDR Version 3.0 + HS Version 4.0 LE UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 15 of 193 Report No.: 14U17673-S1C 6.3. Maximum Output Power Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 16 of 193 UATLATUATLAT33.2033.5033.2033.5033.2033.5033.2033.5032.2032.5032.2032.5028.7029.0028.7029.0028.7029.0028.7029.0029.9030.0029.9028.8029.9030.0029.9028.8027.1029.5028.9025.8027.4028.0027.4028.0027.4028.0027.4026.8024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0019.9025.0023.1019.0019.9025.0023.1019.0019.9025.0023.1019.0019.9025.0023.1019.0020.1024.2523.3018.5020.1024.2523.3018.5020.1024.2523.3018.5020.1024.2523.3018.5024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0021.4021.7021.4021.7020.1024.2523.3018.5020.1024.2523.3018.5020.1024.2523.3018.5024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0024.7025.0019.9025.0023.1019.0019.9025.0023.1019.0019.9025.0023.1019.00RF Air interfaceModeGSM850VoiceGPRS 1 slotGPRS 2 slotsEGPRS 1 slotEGPRS 2 slotsGSM1900VoiceGPRS 1 slotGPRS 2 slotsEGPRS 1 slotEGPRS 2 slotsW-CDMABand VR99HSDPAHSUPADC-HSDPAW-CDMABand IIR99HSDPAHSUPADC-HSDPAW-CDMABand IVR99HSDPAHSUPADC-HSDPACDMA BC01xRTT1xEVDO Rel. 01xEVDO Rev. A1xEVDO Rev. BCDMA BC11xRTT1xEVDO Rel. 01xEVDO Rev. ACDMA BC101xRTT1xEVDO Rel. 01xEVDO Rev. ACDMA BC151xRTT1xEVDO Rel. 01xEVDO Rev. AHeadBodyMaximum Output Power (dBm) Report No.: 14U17673-S1C Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 17 of 193 UATLATUATLATLTE Band 220.1023.7523.4018.50LTE Band 419.9024.0023.1019.00LTE Band 523.7024.0023.7024.00LTE Band 1323.7024.0023.7024.00LTE Band 1723.7024.0023.7024.00LTE Band 2520.1023.5023.4018.50LTE Band 2623.0023.0023.0023.00LTE Band 4122.5022.5022.5019.00HeadBodyMaximum Output Power (dBm)RF Air interfaceModeQPSKQPSKQPSKQPSKQPSKQPSKQPSKQPSKWi-Fi 2.4 GHz802.11b/g/n802.11a802.11n/ac HT20802.11n/ac HT40802.11ac HT80802.11a802.11n/ac HT20802.11n/ac HT40802.11ac HT80802.11a802.11n/ac HT20802.11n/ac HT40802.11ac HT80802.11a802.11n/ac HT20802.11n/ac HT40802.11ac HT80Wi-Fi 5.2 GHz12.0012.0012.00RF Air interfaceModeMaximum Output Power (dBm)RF Air interfaceMode12.00BluetoothPCell_ON (Low Power)PCell_OFF (Max Power)15.0018.00Maximum Output Power (dBm)Head11.5017.00Body12.0018.009.0014.5018.0016.0015.00Wi-Fi 5.3 GHz11.0017.0011.0017.0011.0017.0011.0014.50Wi-Fi 5.5 GHz9.0014.509.0014.509.0012.50Wi-Fi 5.8 GHz11.5017.0011.5015.0011.5014.00 Report No.: 14U17673-S1C 6.4. Simultaneous Transmission Condition RF Exposure Condition Capable Transmit Configurations Head 1. GSM 850 / 1900 Voice + Wi-Fi 2.4 / 5GHz Issue Date: 8/15/2014 2. GSM 850 / 1900 (GPRS/EDGE) + Wi-Fi 2.4 / 5GHz 3. CDMA 1xRTT BC0 / BC1 / BC10 / BC15 + Wi-Fi 2.4 / 5GHz 4. CDMA 1xEV-DO BC0 / BC1 / BC10 / BC15 + Wi-Fi 2.4 / 5GHz 5. WCDMA Band V / IV / II + Wi-Fi 2.4 / 5GHz 6. 7. LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 + Wi-Fi 2.4 / 5GHz LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 / B41+ Wi-Fi 2.4 / 5GHz (Only for model A1586) Body-worn Accessory 1. GSM 850 / 1900 Voice + Wi-Fi 2.4 / 5GHz + BT 2. GSM 850 / 1900 Voice + BT 3. GSM 850 / 1900 (GPRS/EDGE) + Wi-Fi 2.4 / 5GHz + BT 4. GSM 850 / 1900 (GPRS/EDGE) + BT 5. CDMA 1xRTT BC0 / BC1 / BC10 / BC15 + Wi-Fi 2.4 / 5GHz + BT 6. CDMA 1xRTT BC0 / BC1 / BC10 / BC15 + BT 7. CDMA 1xEV-DO BC0 / BC1 / BC10 / BC15 + Wi-Fi 2.4 / 5GHz + BT 8. CDMA 1xEV-DO BC0 / BC1 / BC10 / BC15 + BT 9. WCDMA Band V / IV / II + Wi-Fi 2.4 / 5GHz + BT 10. WCDMA Band V / IV / II + BT 11. LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 + Wi-Fi 2.4 / 5GHz + BT 12. LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 / B41 + Wi-Fi 2.4 / 5GHz + BT (Only for model A1586) 13. LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 + BT 14. LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 / B41 + BT(Only for model A1586) Wireless Router (Hotspot) 1. GSM 850 / 1900 (GPRS/EDGE) + Wi-Fi 2.4GHz 2. CDMA 1xRTT BC0 / BC1 / BC10 / BC15 + Wi-Fi 2.4GHz 3. CDMA 1xEV-DO BC0 / BC1 / BC10 / BC15 + Wi-Fi 2.4GHz 4. WCDMA Band V / IV / II + Wi-Fi 2.4GHz 5. 6. LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 + Wi-Fi 2.4GHz LTE B2 / B4 / B5/ B13 / B17 / B25 / B26 / B41 + Wi-Fi 2.4GHz (Only for model A1586) Notes:

1. Wi-Fi only 2.4GHz supports Hotspot. 2. GPRS/EDGE, CDMA, WCDMA, LTE support Hotspot. 3. VoIP is supported in CDMA, LTE, WCDMA, GPRS, Wi-Fi 2.4GHz & 5GHz. 4. Wi-Fi 2.4GHz Radio cannot transmit simultaneously with Bluetooth Radio. 5. Wi-Fi 2.4GHz is using PCell_ON power table when cellular transmitter is on. 6. Wi-Fi 5GHz uses Head and Body Power Tables (Section 8.7) UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 18 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 6.5. General LTE SAR Test and Reporting Considerations Item Frequency range, Channel Bandwidth, Numbers and Frequencies Description Band 2 Low Mid High Band 4 Low Mid High Band 5 Low Mid High Band 13 Low Mid High Band 17 Low Mid High 20 MHz 18700

/1860 18900/

1880 19100/

1900 20 MHz 20050/

1720 20175/

1732.5 20300/

1745 Frequency range: 1850 - 1910 MHz 15 MHz 18675/

1857.5 18900/

1880 19125/

1902.5 Channel Bandwidth 5 MHz 18625/

1852.5 18900/

1880 19175/

1907.5 10 MHz 18650/

1855 18900/

1880 19150/

1905 3 MHz 18615/

1851.5 18900/

1880 19185/

1908.5 Frequency range: 1710 - 1755 MHz 15 MHz 20025/

1717.5 20175/

1732.5 20325/

1747.5 Channel Bandwidth 5 MHz 19975/

1712.5 20175/

1732.5 20375/

1752.5 10 MHz 20000/

1715 20175/

1732.5 20350/

1750 Frequency range: 824 - 849 MHz 20 MHz 15 MHz 20 MHz 15 MHz 20 MHz 15 MHz 829 10 MHz 20450/

Channel Bandwidth 5 MHz 20425/

826.5 20525/

836.5 20625/

846.5 20525/

836.5 20600/

844 Frequency range: 777 - 787 MHz 10 MHz Channel Bandwidth 5 MHz 23205/

779.5 23230/

23230/

782 782 23255/

784.5 Frequency range: 704 - 716 MHz 10 MHz Channel Bandwidth 5 MHz 23755/

706.5 23790/

23790/

710 710 23825/

713.5 1.4 MHz 18607/

1850.7 18900/

1880 19193/

1909.3 1.4 MHz 19957/

1710.7 20175/

1732.5 20393/

1754.3 1.4 MHz 20407/

824.7 20525/

836.5 20643/

848.3 3 MHz 19965/

1711.5 20175/

1732.5 20385/

1753.5 3 MHz 20415/

825.5 20525/

836.5 20635/

847.5 3 MHz 1.4 MHz 3 MHz 1.4 MHz UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 19 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 General LTE SAR Test and Reporting Considerations (Continued) Frequency range, Channel Bandwidth, Numbers and Frequencies Band 25 Frequency range: 1850 - 1915 MHz Channel Bandwidth Low Mid High Band 26 Low Mid High Band 41 Low Low-Mid Mid Mid-High High 20 MHz 26140/

1860 26365/

1882.5 26590/

1905 15 MHz 26115/

1857.5 26365/

1882.5 26615/

1907.5 10 MHz 26090/

1855 26365/

1882.5 26640/

1910 5 MHz 26065/

1852.5 26365/

1882.5 26665/

1912.5 3 MHz 26055/

1851.5 26365/

1882.5 26675/

1913.5 Frequency range: 814 824 MHz

(Channels straddle part 22 and part 90 not supported) 20 MHz 15 MHz Channel Bandwidth 5 MHz 10 MHz 26740/

819 26865/

821.3 3 MHz 26705/

820.3 26865/

821.3 27025/

822.3 Frequency range: 2496 - 2690 MHz 1.4 MHz 26047/

1850.7 26365/

1882.5 26683/

1914.3 1.4 MHz Channel Bandwidth 5 MHz 3 MHz 1.4 MHz 20 MHz 39750/

2506.0 40185/

2549.5 40620/

2593.0 41055/

2636.5 41490/

2680.0 15 MHz 39725/

2503.5 40173/

2548.3 40620/

2593.0 41068/

2547.8 41515/

2682.5 10 MHz 39700/

2501 40160/

2547.0 40620/

2593.0 41080/

2639.0 41540/

2685.0 LTE transmitter and antenna LTE can transmit from either UAT (Secondary Antenna) or LAT (Primary Antenna). The antenna implementation switching is implemented with a physical, break-before-make switch such that only one antenna can be used for LTE transmission at a time. Maximum power reduction (MPR) MPR Built-in by design A-MPR (additional MPR) was disabled during SAR testing Spectrum plots for RB configurations A properly configured base station simulator was used for the SAR and power measurements;

therefore, spectrum plots for each RB allocation and offset configuration are not included in the SAR report. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 20 of 193 Report No.: 14U17673-S1C 6.6. LTE (TDD) Considerations Issue Date: 8/15/2014 According to KDB 941225 D05 SAR for LTE Devices v02r03, for Time-Division Duplex (TDD) systems, SAR must be tested using a fixed periodic duty factor according to the highest transmission duty factor implemented for the device and supported by the defined 3GPP LTE TDD configurations. SAR was tested with the highest transmission duty factor (63.33%) using Uplink-downlink configuration 0 and Special subframe configuration 7. LTE TDD Band 41 supports 3GPP TS 36.211 section 4.2 for Type 2 Frame Structure and Table 4.2-2 for uplink-downlink configurations and Table 4.2-1 for Special subframe configurations. Table 4.2-1: Configuration of special subframe (lengths of DwPTS/GP/UpPTS). Special subframe DwPTS UpPTS configuration Normal cyclic prefix in uplink Extended cyclic prefix in uplink DwPTS UpPTS Normal cyclic prefix in uplink Extended cyclic prefix in uplink Normal cyclic prefix in downlink Extended cyclic prefix in downlink 0 1 2 3 4 5 6 7 8 9 Table 4.2-2: Uplink-downlink configurations. Uplink-downlink configuration Downlink-to-

Uplink Switch-

point periodicity 0 1 2 3 4 5 6 5 ms 5 ms 5 ms 10 ms 10 ms 10 ms 5 ms Calculated Duty Cycle Uplink-

Downlink Configuration Downlink-to-

Uplink Switch-

point Periodicity 0 1 2 3 4 5 6 5 ms 5 ms 5 ms 10 ms 10 ms 10 ms 5 ms 0 D D D D D D D 0 D D D D D D D 1 S S S S S S S 1 S S S S S S S 2 U U U U U U U 2 U U U U U U U Subframe number 3 U U D U U D U 4 U D D U D D U 5 D D D D D D D 6 S S S D D D S Subframe Number 3 U U D U U D U 4 U D D U D D U 5 D D D D D D D 6 S S S D D D S Calculated Duty Cycle = Extended cyclic prefix in uplink x (Ts) x # of S + # of U Example for Calculated Duty Cycle for Uplink-Downlink Configuration 0:

Calculated Duty Cycle = 5120 x [1/(15000 x 2048)] x 2 + 6 ms = 63.33%

where Ts = 1/(15000 x 2048) seconds 8 U U D D D D U 8 U U D D D D U

-

-

7 U U U D D D U 7 U U U D D D U 9 U D D D D D D 9 U D D D D D D

-

-

-

-

Calculated Duty Cycle (%) 63.33 43.33 23.33 31.67 21.67 11.67 53.33 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 21 of 193 s6592Ts2192Ts2560Ts7680Ts2192Ts2560Ts19760Ts20480Ts21952Ts23040Ts24144Ts25600Ts26336Ts7680Ts4384Ts5120Ts6592Ts4384Ts5120Ts20480Ts19760Ts23040Ts21952Ts12800Ts24144Ts13168T Report No.: 14U17673-S1C Issue Date: 8/15/2014 6.7. Antenna Dimensions and Separation Distances Refer to separate filing document. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 22 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 7. RF Exposure Conditions (Test Configurations) Refer to Antenna Dimensions and Separation Distances for the specific details of the antenna-to-

antenna and antenna-to-edge(s) distances. 7.1. Head For GSM, W-CDMA, CDMA, LTE and Wi-Fi/BT Test Configurations Left Touch Left Tilt (15) Right Touch Right Tilt (15) SAR Required Note Yes Yes Yes Yes 7.2. Body-worn Accessory The Body-worn accessory test configurations were tested using a conservative minimum test separation distance of 5 mm. For WWAN and LTE (LAT/Primary Antenna) Test Configurations Rear Front Antenna-to-

edge/surface SAR Required

<25 mm

<25 mm Yes Yes Note For WWAN and LTE (UAT/Secondary Antenna) Test Configurations Rear Front For Wi-Fi/BT Test Configurations Rear Front Antenna-to-

edge/surface SAR Required

<25 mm

<25 mm Yes Yes Antenna-to-

edge/surface SAR Required

<25 mm

<25 mm Yes Yes Note Note UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 23 of 193 Report No.: 14U17673-S1C 7.3. Wireless Router (Hotspot) Issue Date: 8/15/2014 Per KDB inquiry submitted in the manufacturer KDB titled Detect Mode, hotspot operation SAR test cases are covered by worse-cases in Body-worn SAR at 5 mm separation distance. For WWAN and LTE (LAT/Primary Antenna) Test Configurations Rear Front Edge 1 (Top) Edge 2 (Right) Edge 3 (Bottom) Edge 4 (Left) Antenna-to-

edge/surface SAR Required

<25 mm

<25 mm

>25 mm 0 mm 0 mm 0 mm Yes Yes No Yes Yes Yes Note SAR is not required because the distance from the antenna to the edge is > 25 mm as per KDB 941225 D06 Hotspot Mode SAR For WWAN, LTE, & 2.4GHz/Bluetooth (UAT/Secondary Antenna) Antenna-to-

edge/surface SAR Required Note Yes Yes Yes Yes No Yes SAR is not required because the distance from the antenna to the edge is > 25 mm as per KDB 941225 D06 Hotspot Mode SAR For Wi-Fi 2.4GHz (UAT/Secondary Antenna) Antenna-to-

edge/surface SAR Required Note Yes Yes Yes Yes No Yes SAR is not required because the distance from the antenna to the edge is > 25 mm as per KDB 648474 D04 Handset SAR Antenna-to-

edge/surface SAR Required Note Yes Yes Yes No No Yes SAR is not required because the distance from the antenna to the edge is > 25 mm as per KDB 648474 D04 Handset SAR SAR is not required because the distance from the antenna to the edge is > 25 mm as per KDB 648474 D04 Handset SAR Test Configurations Rear Front Edge 1 (Top) Edge 2 (Right)

<25 mm

<25 mm 0 mm 0 mm Edge 3 (Bottom)

>25 mm Edge 4 (Left) 0 mm 7.4. Airplay Test Configurations Rear Front Edge 1 (Top) Edge 2 (Right)

<25 mm

<25 mm 0 mm 0 mm Edge 3 (Bottom)

>25 mm Edge 4 (Left) 0 mm For Wi-Fi 5GHz Test Configurations Rear Front Edge 1 (Top) Edge 2 (Right)

<25 mm

<25 mm

<25 mm

>25 mm Edge 3 (Bottom)

>25 mm Edge 4 (Left)

<25 mm UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 24 of 193 Report No.: 14U17673-S1C 8. Conducted Output Power Measurements Issue Date: 8/15/2014 The proprietary logic is used to determine when head/body power table is used. 8.1. GSM850 and GSM1900 GSM850 Notes:

The worst-case configuration and mode for SAR testing is determined to be as follows:

Head & Body-worn Accessory: GMSK Voice Mode Hotspot mode: GMSK (GPRS) mode with 2 time slots, based on the output power measurements above SAR is not required for EGPRS (8PSK) mode because its output power is less than that of GPRS Mode UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 25 of 193 UATLATUATLAT128824.233.2033.0032.2031.80190836.633.2033.0032.2031.80251848.833.2033.0032.2031.801 slot2 slots1 slot2 slots1 slot2 slots1 slot2 slots128824.233.2032.2032.9031.8033.2032.2032.9031.80190836.633.2032.2033.0031.8033.2032.2033.0031.80251848.833.2032.2033.1031.8033.2032.2033.1031.80128824.224.1726.1823.8725.7824.1726.1823.8725.78190836.624.1726.1823.9725.7824.1726.1823.9725.78251848.824.1726.1824.0725.7824.1726.1824.0725.781 slot2 slots1 slot2 slots1 slot2 slots1 slot2 slots128824.228.7028.6029.0029.0028.7028.6029.0029.00190836.628.7028.7029.0028.9028.7028.7029.0028.90251848.828.7028.7029.0028.9028.7028.7029.0028.90128824.219.6722.5819.9722.9819.6722.5819.9722.98190836.619.6722.6819.9722.8819.6722.6819.9722.88251848.819.6722.6819.9722.8819.6722.6819.9722.88850Frame Power (dBm)850Burst Power (dBm)HEADBandCh No.Freq.(MHz)Avg Power (dBm)BODYEGPRS (8PSK) - Coding Scheme: MCS5BandCh No.Freq.(MHz)HEADBODYUATLATUATLATLATGPRS (GMSK) - Coding Scheme: CS1Freq.(MHz)850BODYFrame Power (dBm)GSM (GMSK) - Voice Mode850850BandCh No.UATLATHEADBurst Power (dBm)UAT Report No.: 14U17673-S1C GSM1900 Issue Date: 8/15/2014 Notes:

The worst-case configuration and mode for SAR testing is determined to be as follows:

Head & Body-worn Accessory: GMSK Voice Mode Hotspot mode: GMSK (GPRS) mode with 2 time slots, based on the output power measurements above SAR is not required for EGPRS (8PSK) mode on UAT Body and LAT Head because its output power is less than that of GPRS Mode SAR is required for EGPRS (8PSK) mode on UAT Head and LAT Body because its output power is greater than that of GPRS Mode UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 26 of 193 UATLATUATLAT5121850.229.9029.8029.9028.706611880.029.9029.7029.9028.708101909.829.7029.9029.7028.701 slot2 slots1 slot2 slots1 slot2 slots1 slot2 slots5121850.229.9027.1029.8029.4029.9028.9028.7025.606611880.029.9027.1029.8029.4029.9028.9028.7025.608101909.829.7027.1029.8029.4029.7028.8028.7025.805121850.220.8721.0820.7723.3820.8722.8819.6719.586611880.020.8721.0820.7723.3820.8722.8819.6719.588101909.820.6721.0820.7723.3820.6722.7819.6719.781 slot2 slots1 slot2 slots1 slot2 slots1 slot2 slots5121850.227.4027.4028.0027.9027.4027.2027.0026.806611880.027.4027.4028.0027.9027.4027.2027.0026.808101909.827.3027.4028.0027.9027.3027.2027.0026.805121850.218.3721.3818.9721.8818.3721.1817.9720.786611880.018.3721.3818.9721.8818.3721.1817.9720.788101909.818.2721.3818.9721.8818.2721.1817.9720.78Frame Power (dBm)Frame Power (dBm)Burst Power (dBm)EGPRS (8PSK) - Coding Scheme: MCS5Frame Power (dBm)1900Freq.(MHz)HEADBandCh No.HEADGPRS (GMSK) - Coding Scheme: CS1Burst Power (dBm)1900HEADBandCh No.Freq.(MHz)Avg Power (dBm)BODYLATUATLATGSM (GMSK) - Voice Mode19001900UATLATUATLAT1900BODYFrame Power (dBm)BandCh No.Freq.(MHz)Burst Power (dBm)Burst Power (dBm)BODYUAT Report No.: 14U17673-S1C 8.2. W-CDMA Band V, IV, and II Issue Date: 8/15/2014 Release 99 The following tests were completed according to the test requirements outlined in section 5.2 of the 3GPP TS34.121-1 specification. The DUT supports power Class 3, which has a nominal maximum output power of 24 dBm (+1.7/-3.7). Mode WCDMA General Settings Measured Results Subtest Loopback Mode Rel99 RMC Power Control Algorithm c/d Rel99 Test Mode 1 12.2kbps RMC Algorithm2 8/15 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 27 of 193 UATLATUATLAT4132826.424.0025.0024.0025.004183836.624.0025.0024.0025.004233846.624.0025.0024.0025.0013121712.419.8025.0023.1019.0014131732.619.8025.0023.1019.0015131752.619.9025.0023.0019.0092621852.419.9024.2523.3018.5094001880.020.1024.2523.3018.5095381907.620.0024.2523.3018.50ModeW-CDMABand VRel 99(RMC, 12.2 kbps)Avg Pwr (dBm)HEADBODYW-CDMA Band IIRel 99(RMC, 12.2 kbps)UL Ch No.W-CDMABand IVRel 99(RMC, 12.2 kbps)Freq. (MHz)Band Report No.: 14U17673-S1C HSDPA The following 4 Sub-tests were completed according to Release 7 procedures in section 5.2 of 3GPP TS34.121. A summary of these settings are illustrated below:

Issue Date: 8/15/2014 Mode Subtest Loopback Mode Rel99 RMC HSDPA FRC Power Control Algorithm c d d (SF) c/d hs MPR (dB) DACK DNAK DCQI Ack-Nack repetition factor CQI Feedback (Table 5.2B.4) CQI Repetition Factor (Table 5.2B.4) Ahs =hs/c W-CDMA General Settings HSDPA Specific Settings HSDPA 1 Test Mode 1 12.2kbps RMC H-Set1 Algorithm 2 2/15 15/15 64 2/15 4/15 0 8 8 8 3 4ms 2 30/15 HSDPA 2 HSDPA 3 HSDPA 4 12/15 15/15 12/15 24/15 1 15/15 8/15 15/8 30/15 1.5 15/15 4/15 15/4 30/15 1.5 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 28 of 193 Report No.: 14U17673-S1C Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 29 of 193 UATLATUATLAT4132826.423.6923.8423.6923.844183836.623.6023.9523.6023.954233846.623.7023.8723.7023.874132826.423.2523.9723.2523.974183836.623.2423.9823.2423.984233846.623.4224.0023.4224.004132826.423.2623.9023.2623.904183836.623.1223.6323.1223.634233846.623.4423.4823.4423.484132826.423.2623.5323.2623.534183836.623.1223.5523.1223.554233846.623.3023.6023.3023.6013121712.418.8023.6322.0018.0014131732.618.7123.8321.8818.0015131752.618.7923.4622.1018.0013121712.418.5423.6621.6318.0014131732.618.7724.0021.6618.0015131752.618.9823.6621.7118.0013121712.418.3023.2021.5217.5014131732.618.3923.6721.6418.0015131752.618.5123.1921.6417.6013121712.418.3023.1821.6117.5014131732.618.3223.1721.6317.7015131752.618.5123.5321.6517.6092621852.418.4023.2122.2317.1094001880.018.8023.1822.2917.5095381907.618.9023.2022.2817.2092621852.418.8023.2522.0717.0094001880.018.8023.2322.1517.0095381907.618.4022.9122.0917.1092621852.418.4022.2622.1116.9094001880.018.3022.7822.1417.0095381907.618.3022.4222.1216.6092621852.418.3022.7521.9016.6094001880.018.3022.7922.1717.0095381907.618.7022.4422.1216.80Subtest 1Subtest 1Subtest 2Subtest 3Subtest 4Subtest 3Subtest 4Avg Pwr (dBm)HEADBODYSubtest 4W-CDMA Band IIW-CDMABand IVSubtest 3Subtest 2UL Ch No.W-CDMABand VSubtest 1Subtest 2Freq. (MHz)BandMode Report No.: 14U17673-S1C HSPA (HSDPA & HSUPA) The following 5 Sub-tests were completed according to Release 6 procedures in section 5.2 of 3GPP TS34.121. A summary of these settings are illustrated below:

Issue Date: 8/15/2014 Mode Subtest Loopback Mode Rel99 RMC HSDPA FRC HSUPA Test Power Control Algorithm c d ec c/d hs ed CM (dB) MPR (dB) DACK DNAK DCQI Ack-Nack repetition factor CQI Feedback (Table 5.2B.4) CQI Repetition Factor (Table 5.2B.4) Ahs = hs/c D E-DPCCH DHARQ AG Index ETFCI (from 34.121 Table C.11.1.3) Associated Max UL Data Rate kbps Reference E_TFCIs WCDMA General Settings HSDPA Specific Settings HSUPA Specific Settings HSPA 2 HSPA 1 Test Mode 1 12.2kbps RMC H-Set1 HSUPA Loopback Algorithm2 11/15 15/15 209/225 11/15 22/15 6/15 15/15 12/15 6/15 12/15 94/75 3.0 2 8 0 12 67 174.9 1309/225 1.0 0 8 8 8 3 4ms 2 30/15 6 0 20 75 242.1 E-TFCI 11 E-TFCI PO 4 E-TFCI 67 E-TFCI PO 18 E-TFCI 71 E-TFCI PO 23 E-TFCI 75 E-TFCI PO 26 E-TFCI 81 E-TFCI PO 27 HSPA 3 HSPA 4 HSPA 5 15/15 9/15 30/15 15/9 30/15 47/15 47/15 2.0 1 8 0 15 92 482.8 E-TFCI 11 E-TFCI PO 4 E-TFCI 92 E-TFCI PO 18 15/15 15/15 24/15 15/15 30/15 134/15 1.0 0 7 0 21 81 308.9 2/15 15/15 2/15 2/15 4/15 56/75 3.0 2 5 0 17 71 205.8 E-TFCI 11 E-TFCI PO 4 E-TFCI 67 E-TFCI PO 18 E-TFCI 71 E-TFCI PO 23 E-TFCI 75 E-TFCI PO 26 E-TFCI 81 E-TFCI PO 27 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 30 of 193 Report No.: 14U17673-S1C Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 31 of 193 UATLATUATLAT4132826.423.6623.7423.6623.744183836.623.5123.6723.5123.674233846.623.6523.6523.6523.654132826.423.4823.6123.4823.614183836.623.6123.6923.6123.694233846.623.5323.7523.5323.754132826.423.5623.7323.5623.734183836.623.5323.7423.5323.744233846.623.5723.5123.5723.514132826.423.6023.6623.6023.664183836.623.5223.5023.5223.504233846.623.6823.5123.6823.514132826.423.6723.7423.6723.744183836.623.5123.7223.5123.724233846.623.5923.7423.5923.7413121712.418.6023.4822.0017.8014131732.618.5323.8121.9817.8015131752.618.5623.6022.1017.8013121712.417.8823.5522.0616.7014131732.618.0123.9222.0916.8015131752.618.1023.5421.9016.9013121712.417.3723.5322.0915.9014131732.617.3823.6222.0816.0015131752.617.6723.6022.0016.1013121712.418.3423.5621.9517.1014131732.618.3623.5821.9817.0015131752.618.5723.4821.9517.3013121712.418.3223.5622.0917.5014131732.618.3823.6022.0817.3015131752.618.5723.6022.0217.4092621852.418.8022.6722.2817.2094001880.018.8022.9622.2517.4095381907.618.9022.8022.2717.3092621852.418.3022.6822.2516.9094001880.018.4023.0322.2416.4095381907.618.3022.8522.2416.4092621852.417.6022.6722.2615.7094001880.017.8023.0022.2615.7095381907.618.1022.8422.1915.8092621852.418.6022.6722.1716.4094001880.018.8022.7022.2016.6095381907.618.8022.8322.2516.5092621852.418.8022.6922.2616.7094001880.018.8023.0022.2716.8095381907.618.6022.8322.2716.80UL Ch No.Freq. (MHz)BandW-CDMABand VSubtest 1Subtest 2Subtest 3Subtest 4Subtest 5ModeSubtest 5W-CDMA Band IIAvg Pwr (dBm)HEADBODYSubtest 3Subtest 4Subtest 2Subtest 1W-CDMABand IVSubtest 1Subtest 2Subtest 3Subtest 4Subtest 5 Report No.: 14U17673-S1C DC-HSDPA Issue Date: 8/15/2014 The following tests were completed according to procedures in section 7.3.13 of 3GPP TS34.108 v9.5.0. A summary of these settings are illustrated below:

Downlink Physical Channels are set as per 3GPP TS34.121-1 v9.0.0 E.5.0 Call is set up as per 3GPP TS34.108 v9.5.0 sub clause 7.3.13 The configurations of the fixed reference channels for HSDPA RF tests are described in 3GPP TS 34.121, annex C for FDD and 3GPP TS 34.122. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 32 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 The following 4 Sub-tests for HSDPA were completed according to Release 8 procedures in section 5.2 of 3GPP TS34.121. A summary of subtest settings are illustrated below:

WCDMA General Settings HSDPA Specific Settings Mode Subtest Loopback Mode Rel99 RMC HSDPA FRC Power Control Algorithm c d d (SF) c/d hs MPR (dB) DACK DNAK DCQI Ack-Nack Repetition factor CQI Feedback CQI Repetition Factor Ahs = hs/ c HSDPA 1 Test Mode 1 12.2kbps RMC H-Set1 Algorithm2 2/15 15/15 64 2/15 4/15 0 8 8 8 3 4ms 2 30/15 HSDPA 2 HSDPA 3 HSDPA 4 12/15 15/15 12/15 24/15 0 15/15 8/15 15/8 30/15 0.5 15/15 4/15 15/4 30/15 0.5 Up commands are set continuously to set the UE to Max power. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 33 of 193 Report No.: 14U17673-S1C Measured Results Issue Date: 8/15/2014 HSPA+

Since 16QAM is not used for uplink, the uplink Category and release is same as HSUPA, i.e., CAT 6 Rel 6. Therefore, the RF conducted power is not measured. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 34 of 193 UATLATUATLAT4132826.423.3323.7523.3323.754183836.623.2223.7223.2223.724233846.623.1423.6023.1423.604132826.423.3523.7323.3523.734183836.623.2323.7123.2323.714233846.623.2823.6123.2823.614132826.422.8523.3022.8523.304183836.622.7323.2522.7323.254233846.622.7923.2222.7923.224132826.422.8623.2822.8623.284183836.622.7723.2622.7723.264233846.622.7823.2322.7823.2313121712.418.7023.7621.6717.8014131732.618.4823.7521.4517.8015131752.618.7823.7421.5517.7013121712.418.6823.8021.6517.8014131732.618.5323.7621.5717.8015131752.618.7823.7521.5517.8013121712.418.3323.3721.2017.4014131732.618.3323.3021.0617.3015131752.618.4823.3021.1217.3013121712.418.3323.3821.2017.4014131732.618.1023.2921.0717.3015131752.618.4323.2721.1117.3092621852.418.7023.1021.8817.4094001880.018.8023.0422.0117.3095381907.618.7023.0821.8517.4092621852.418.9023.0821.9617.4094001880.018.9023.0522.0617.4095381907.618.7023.0521.8817.4092621852.418.3022.6321.4516.9094001880.018.4022.5821.5416.9095381907.618.3022.5821.4216.9092621852.418.3022.6321.4216.9094001880.018.4022.5821.5416.9095381907.618.3022.5921.4516.90W-CDMABand VSubtest 1Subtest 2Subtest 3Subtest 4ModeSubtest 4W-CDMA Band IIW-CDMABand IVSubtest 1BandAvg Pwr (dBm)HEADBODYSubtest 3Subtest 2Subtest 1UL Ch No.Subtest 2Subtest 3Subtest 4Freq. (MHz) Report No.: 14U17673-S1C 8.3. CDMA BC0, BC1, BC10, and BC15 1xRTT Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 35 of 193 UATLATUATLAT1013824.7024.7025.0024.7025.00384836.5224.7025.0024.7025.00777848.3124.5024.7024.5024.701013824.7024.7025.0024.7025.00384836.5224.7025.0024.7025.00777848.3124.6024.7024.6024.701013824.7024.7025.0024.7025.00384836.5224.7025.0024.7024.90777848.3124.5024.7024.5024.70251851.2520.1024.1023.1018.506001880.0020.0024.1023.2018.5011751908.7520.1024.2023.1018.50251851.2520.1024.1023.2018.506001880.0020.0024.2023.1018.5011751908.7520.1024.2023.0018.50251851.2520.1024.2523.2018.506001880.0020.0024.2523.1018.5011751908.7520.1024.2523.1018.50476817.924.6025.0024.6025.00580820.524.6025.0024.6025.00684823.124.6025.0024.6025.00476817.924.6025.0024.6025.00580820.524.6025.0024.5025.00684823.124.6025.0024.5025.00476817.924.6025.0024.6025.00580820.524.6025.0024.6025.00684823.124.6025.0024.6025.00251711.2519.9025.0023.0019.004501732.5019.9025.0023.0019.008751753.7519.9025.0022.9019.00251711.2519.9025.0023.0019.004501732.5019.9025.0023.0019.008751753.7519.9025.0022.9019.00251711.2519.9025.0023.1019.004501732.5019.9025.0023.1019.008751753.7519.9025.0023.1019.00Avg Pwr (dBm)HEADBODYRC3 SO55(Loopback)ModeRC1 SO55(Loopback)RC3 SO55(Loopback)RC3 SO32(+F-SCH)UL Ch No.Freq. (MHz)BandRC3 SO32(+F-SCH)BC 0BC 15RC1 SO55(Loopback)RC3 SO55(Loopback)RC3 SO32(+F-SCH)RC1 SO55(Loopback)BC 1RC1 SO55(Loopback)RC3 SO55(Loopback)RC3 SO32(+F-SCH)BC 10 Report No.: 14U17673-S1C 1xEV-DO Rel. 0 Measured Results Issue Date: 8/15/2014 1xEV-DO Rev. A Measured Results UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 36 of 193 UATLATUATLAT1013824.7024.5024.7024.5024.70384836.5224.5024.8024.5024.80777848.3124.4024.6024.4024.60251851.2520.1024.2523.2018.506001880.0020.0024.2523.2018.5011751908.7520.0024.2523.2018.50476817.924.4025.0024.4025.00580820.524.5025.0024.6025.00684823.124.6024.9024.6024.90251711.2519.9024.9023.1019.004501732.5019.9024.7023.1019.008751753.7519.9024.8023.1019.00BandBC 0FTAP Rate307.2 kbps(2 slot, QPSK)Avg Pwr (dBm)HEADBODYRTAP Rate153.6 kbpsUL Ch No.BC15307.2 kbps(2 slot, QPSK)153.6 kbpsFreq. (MHz)BC1307.2 kbps(2 slot, QPSK)153.6 kbpsBC10307.2 kbps(2 slot, QPSK)153.6 kbpsUATLATUATLAT1013824.7024.5024.7024.5024.70384836.5224.5024.9024.5024.90777848.3124.4024.5024.4024.50251851.2520.1024.3023.1018.506001880.0020.0024.2023.2018.5011751908.7520.0024.2023.1018.50476817.924.5024.9024.5024.90580820.524.5025.0024.5025.00684823.124.6025.0024.5025.00251711.2519.8024.9022.9019.004501732.5019.8024.7023.1019.008751753.7519.8024.8023.0019.00BC15307.2k, QPSK/ ACK channel is transmitted at all the slots4096Freq. (MHz)BC1307.2k, QPSK/ ACK channel is transmitted at all the slots4096BC10307.2k, QPSK/ ACK channel is transmitted at all the slots4096BandBC 0FETAPTraffic Format307.2k, QPSK/ ACK channel is transmitted at all the slotsAvg Pwr (dBm)HEADBODYRETAPData Payload Size4096UL Ch No. Report No.: 14U17673-S1C 1xEV-DO Rev. B Call box setup procedure Issue Date: 8/15/2014 1xEV-DO Release B CMW 500 Signal Generator > 1xEV-DO Taskbar Enable CMW 500 1xEV-DO Signaling Configuration Window >

1xEV-DO Signaling On Window:

Under Access Network Control:

Band Class: BC0: US Cellular RF Channel: 31 1xEV-DO Power: -70 dBm Release B 1xEV-DO Signaling Configuration Window Under RF Frequency Band / Channel: Enter Ch. Frequency Under Carrier Configuration: RF Frequency For Two Carriers: Low Channel (1013) Carrier [0]

Carrier [1]

RF Channel 31 1013 RF Channel Offset 0 982 Pilot [0]

Under Carrier Configuration: RF Pilot Carrier Sector C0/S0 CA/S1 Active on AN For Three Carriers: Low Channel (1013) Carrier [0]

Carrier [1]

Carrier [2]

RF Channel 72 31 1013 RF Channel Offset 0

-41 941 Pilot [0]

Pilot [1]

Pilot [2]

Under Carrier Configuration: RF Pilot Carrier Sector C0/S0 C1/S1 C2/S2 Active on AN Assigned to AT Assigned to AT 1xEV-DO Rev. B Measured Results Rvs Power Ctrl > All Up bits (to get the maximum power) UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 37 of 193 UATLATUATLAT1013+31824.70+825.9321.1021.7021.1021.70384+425836.52+837.7521.1021.7021.1021.70736+777847.08+848.3121.0021.6021.0021.601013+156824.70+829.6821.1021.8021.1021.80384+550836.52+841.5021.1021.8021.1021.80611+777843.33+848.3121.1021.7021.1021.701013+31+72824.70+825.93+827.1621.1021.6021.1021.60384+425+466836.52+837.75+838.9821.1021.6021.1021.60695+736+777845.85+847.08+848.3121.1021.6021.1021.60Avg Pwr (dBm)HEADBODYTwo Carrier Max SeparationThree Carrier Max SeparationBC0Two Carrier Mini SeparationChannelf (MHz)BandTest Set #Report No.: 14U17673-S1C 8.4. LTE Bands 2, 4, 5, 13, 17, 25, 26, & 41 8.4.1. LTE Band 2 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 38 of 193 UATLATUATLAT10020.0023.3023.2018.40149020.0023.3023.2018.40199020.0023.2023.2018.30500119.0022.3022.2017.005024119.1022.3022.2017.005049119.1022.3022.2017.001000119.1022.3022.2017.0010119.0022.3522.0017.00149119.0022.3321.9417.00199119.0022.4222.1117.00500218.0021.7521.2416.505024218.0021.6921.2916.505049218.0021.7621.4316.501000218.0021.8521.3616.5010020.1023.7023.4018.40149020.1023.7523.4018.50199020.1023.7023.4018.40500119.0022.7022.4017.005024119.1022.7522.4017.005049119.1022.7022.4017.001000119.1022.7022.4017.0010119.0022.3422.1217.00149119.0022.4022.1017.00199119.0022.3822.0217.00500218.0021.7621.3516.505024218.0021.7421.4216.505049218.0021.8121.3416.501000218.0021.8221.4216.5010020.0023.6023.2018.40149020.0023.6023.3018.50199020.0023.6023.2018.40500119.0022.7522.2017.005024119.0022.7522.2017.005049119.0022.7522.2017.001000119.0022.7522.2017.0010119.0022.6022.0017.00149119.0022.6022.0017.00199119.0022.6022.0017.00500218.0021.6021.0516.505024218.0021.6021.1216.505049218.0021.6021.0516.501000218.0021.6021.1316.50191001900.0QPSK16QAM20187001860.0QPSK16QAM189001880.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 2 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 39 of 193 UATLATUATLAT10019.9023.1123.0718.40137020.0023.1023.0118.40174019.8023.1022.9618.30360119.0022.1822.1617.003616119.1022.2722.1817.003635119.1022.2822.0817.00750119.1022.2222.1517.0010119.0021.9321.9117.00137119.0021.9321.9117.00174119.0021.8921.9117.00360218.0021.2621.1516.503616218.0021.2521.1816.503635218.0021.2621.0616.50750218.0021.3021.0916.5010020.0023.5523.1018.40137020.1023.5023.1118.50174020.0023.5823.3418.40360119.0022.6922.3117.003616119.1022.6222.3017.003635119.1022.6322.3717.00750119.1022.6722.3617.0010119.0022.2822.1117.00137119.0022.2322.1417.00174119.0022.2722.0817.00360218.0021.5721.2816.503616218.0021.5121.2316.503635218.0021.4621.2916.50750218.0021.5521.2216.5010020.0023.5123.1918.40137020.0023.5323.2718.50174020.0023.5023.1618.40360119.0022.6722.1717.003616119.0022.6722.1517.003635119.0022.6922.1417.00750119.0022.6922.1717.0010119.0022.3722.0517.00137119.0022.3522.0817.00174119.0022.3221.9517.00360218.0021.5021.2316.503616218.0021.4921.2616.503635218.0021.5121.2516.50750218.0021.5721.2516.50191251902.5QPSK16QAM15186751857.5QPSK16QAM189001880.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 2 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 40 of 193 UATLATUATLAT10019.9023.1323.0618.40124020.0023.1223.0718.40149019.8023.0523.1018.30250119.0022.1322.1617.002512119.1022.1222.1617.002524119.1022.1222.1517.00500119.1022.1522.1817.0010119.0021.9921.9317.00124119.0021.9021.9517.00149119.0021.9221.9317.00250218.0021.2221.1516.502512218.0021.2021.2316.502524218.0021.1921.2116.50500218.0021.1921.2316.5010020.0023.3323.2118.40124020.1023.3923.2418.50149020.0023.4323.1818.40250119.0022.4522.3117.002512119.1022.5222.3317.002524119.1022.5322.3517.00500119.1022.4722.3717.0010119.0022.2022.1217.00124119.0022.1922.1517.00149119.0022.2922.1017.00250218.0021.5121.2116.502512218.0021.5221.3016.502524218.0021.5821.2416.50500218.0021.4921.2316.5010020.0023.4222.9718.40124020.0023.5623.0118.50149020.0023.5522.9218.40250119.0022.5622.1517.002512119.0022.6622.0817.002524119.0022.6622.0117.00500119.0022.7422.0417.0010119.0022.3822.1817.00124119.0022.4621.9017.00149119.0022.5521.9217.00250218.0021.5221.1016.502512218.0021.5321.0116.502524218.0021.5521.0016.50500218.0021.5821.0116.50191501905.0QPSK16QAM10186501855.0QPSK16QAM189001880.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 2 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 41 of 193 UATLATUATLAT10020.0023.1223.0618.40112020.0023.1123.1418.40124020.0023.1323.1318.30120119.0022.1122.1617.00126119.1022.1622.1317.001211119.1022.1322.1517.00250119.1022.1422.1517.0010119.0021.9422.1217.00112119.0021.9322.1917.00124119.0021.9922.1417.00120218.0021.1321.1016.50126218.0021.0921.0116.501211218.0021.0721.1616.50250218.0021.2021.2216.5010020.1023.3323.1918.40112020.1023.3423.1818.50124020.1023.3923.2518.40120119.0022.4722.2517.00126119.1022.4222.3117.001211119.1022.4522.2717.00250119.1022.3922.2717.0010119.0022.1822.3717.00112119.0022.2422.3217.00124119.0022.2922.2717.00120218.0021.4921.2716.50126218.0021.4421.2316.501211218.0021.4721.2916.50250218.0021.5621.2316.5010020.0023.5422.9018.40112020.0023.5323.0018.50124020.0023.5422.9718.40120119.0022.6522.0317.00126119.0022.5522.0017.001211119.0022.6222.0017.00250119.0022.5821.9617.0010119.0022.5522.1717.00112119.0022.5222.1317.00124119.0022.4822.1817.00120218.0021.5021.0116.50126218.0021.4621.0116.501211218.0021.4721.0116.50250218.0021.5721.1016.50BW(MHz)ChFreq. (MHz)ModeMPR1880.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY191751907.5QPSK16QAM5186251852.5QPSK16QAM18900 Report No.: 14U17673-S1C LTE Band 2 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 42 of 193 UATLATUATLAT10020.0023.0623.0518.4017020.0022.9722.9718.40114020.0023.0323.1318.3080119.0022.0522.1217.0084119.1022.0522.1217.0087119.1022.0222.1217.00150119.1021.9822.0617.0010119.0021.9421.9817.0017119.0021.8721.9017.00114119.0021.9322.0617.0080218.0021.1521.1316.5084218.0021.1621.1216.5087218.0021.1521.1116.50150218.0021.1421.0916.5010020.1023.6123.2618.4017020.1023.5123.1818.50114020.1023.6323.2818.4080119.0022.6722.2917.0084119.1022.6322.2617.0087119.0022.6422.2817.00150119.1022.6122.2917.0010119.0022.2922.1417.0017119.0022.2022.1117.00114119.0022.2822.1417.0080218.0021.5121.2516.5084218.0021.5021.2316.5087218.0021.5321.2616.50150218.0021.4721.2416.5010020.0023.5522.9118.4017020.1023.5123.0218.50114020.1023.5623.0018.5080119.0022.5721.9617.0084119.0022.6022.0317.0087119.0022.5822.0417.00150119.0022.5821.9417.0010119.0022.4521.9217.0017119.0022.3721.9117.00114119.0022.4521.9417.0080218.0021.6021.0216.5084218.0021.5421.0316.5087218.0021.5421.0616.50150218.0021.5721.0016.50191851908.5QPSK16QAM3186151851.5QPSK16QAM189001880.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 2 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 43 of 193 UATLATUATLAT10019.8023.1823.0218.4012020.0023.1122.9818.4015019.9023.1823.0918.3030019.9023.1023.0018.3031019.9023.2023.0518.4032019.8023.1523.0018.3060119.1022.2222.1017.0010119.0021.9822.1217.0012119.0021.9822.1017.0015119.0021.9522.2017.0030119.0021.9022.2117.0031119.1021.9222.0017.0032119.0021.9622.1017.0060218.0021.2322.1016.5010020.0023.5623.2618.4012020.1023.4623.2218.5015020.0023.5723.2818.4030020.0023.3023.2018.4031020.1023.2023.1518.4032019.9023.2523.1618.4060119.1022.5622.2817.0010119.0022.2322.3017.0012119.0022.2222.2417.0015119.0022.2522.2817.0030119.1021.5322.2017.0031119.0021.5122.2517.0032119.0021.5322.1817.0060218.0021.5021.2416.5010020.0023.5523.0418.4012020.1023.5323.0118.5015020.1023.5722.9718.5030020.0023.3022.8718.4031020.0023.2523.0018.5032020.0023.2922.1418.5060119.0022.5322.0217.0010119.0022.4622.0317.0012119.0022.4021.9917.0015119.0022.4322.0417.0030119.0022.3222.0017.0031119.1022.3022.0517.0032119.0022.2522.0217.0060218.0021.5321.1116.50191931909.3QPSK16QAM1.4186071850.7QPSK16QAM189001880.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C 8.4.2. LTE Band 4 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 44 of 193 UATLATUATLAT10019.8024.0022.9819.00149019.8023.8023.1019.00199019.8023.8023.0719.00500118.9023.0022.1017.905024118.9023.0022.1018.005049118.9023.0022.1018.001000118.9023.0022.1018.0010118.9023.0022.1018.00149118.9023.0022.1018.00199118.9023.0022.1018.00500217.9022.0021.1017.005024217.9022.0021.1017.005049217.9022.0021.0017.001000217.9022.0021.1017.0010019.9024.0023.0018.90149019.9024.0023.1019.00199019.9024.0023.0019.00500118.9023.0022.1017.905024118.9023.0022.1017.905049118.9023.0022.1017.901000118.9023.0022.1018.0010118.9023.0022.1018.00149118.9023.0022.1018.00199118.9023.0022.1018.00500217.9022.0021.1017.005024217.9022.0021.1017.005049217.9022.0021.0617.001000217.9022.0021.1017.0010019.9024.0022.9718.90149019.9024.0023.0019.00199019.8024.0023.1019.00500118.9023.0022.0018.005024118.9023.0022.0018.005049118.9023.0022.1018.001000118.9023.0022.1018.0010118.9023.0022.1018.00149118.9023.0022.1018.00199118.9023.0022.1018.00500217.9022.0021.1017.005024217.9022.0021.1017.005049217.9022.0021.0017.001000217.9022.0021.1017.00203001745.0QPSK16QAM20200501720.0QPSK16QAM201751732.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 4 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 45 of 193 UATLATUATLAT10019.8023.7222.9019.00137019.8023.6322.9019.00174019.8023.7622.9019.00360118.9022.9122.0417.903616118.9022.9022.0318.003635118.9022.8822.0518.00750118.9022.9722.0718.0010118.9022.7221.8118.00137118.9022.7221.8118.00174118.9022.8521.8418.00360217.9021.8321.0417.003616217.9021.8321.0517.003635217.9021.8420.9817.00750217.9021.8821.0617.0010019.9023.7722.8818.90137019.9023.7222.9219.00174019.9023.8822.9519.00360118.9022.9922.0517.903616118.9022.9322.1017.903635118.9022.9622.0617.90750118.9022.9822.0818.0010118.9022.8021.8518.00137118.9022.7621.8118.00174118.9022.7021.8118.00360217.9021.8920.9817.003616217.9021.8620.9817.003635217.9021.8720.9717.00750217.9021.9121.0917.0010019.9023.8422.9018.90137019.9023.8522.9319.00174019.8023.7922.7619.00360118.9022.9921.9618.003616118.9023.0021.9718.003635118.9022.8822.0918.00750118.9022.9222.1018.0010118.9022.7021.8118.00137118.9022.7021.8318.00174118.9022.7121.8318.00360217.9021.9521.0817.003616217.9021.9321.0617.003635217.9021.8420.9017.00750217.9021.9121.0917.00203251747.5QPSK16QAM15200251717.5QPSK16QAM201751732.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 4 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 46 of 193 UATLATUATLAT10019.8023.8122.8919.00124019.8023.7722.8819.00149019.8023.7922.8719.00250118.9022.9321.9817.902512118.9022.9722.0218.002524118.9022.9421.9718.00500118.9022.9521.9818.0010118.9022.7421.8118.00124118.9022.7421.8118.00149118.9022.7821.8118.00250217.9021.9820.9917.002512217.9021.9621.0217.002524217.9021.9520.9517.00500218.0021.9721.0417.0010019.8023.9722.8618.90124019.9023.9222.8719.00149019.8023.9922.9019.00250118.7022.9721.9817.902512118.8022.9922.0117.902524118.9022.9722.0517.90500118.7022.9722.0018.0010118.9022.9121.8118.00124118.9022.8121.8118.00149118.9022.8321.8018.00250217.9021.9420.9317.002512217.9021.9020.9117.002524217.9021.9220.9517.00500217.9021.9321.0317.0010019.9023.9322.8718.90124019.9023.8822.9119.00149019.8023.8722.7119.00250118.9022.9621.9618.002512118.9022.9721.9718.002524118.9022.9922.0818.00500118.9022.9222.0218.0010118.9022.8221.8118.00124118.9022.8321.8118.00149118.9022.8621.8018.00250217.9021.9921.0417.002512217.9021.9721.0017.002524217.9022.0020.9917.00500217.9021.8821.0217.00BW(MHz)ChFreq. (MHz)ModeMPR1732.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY203501750.0QPSK16QAM10200001715.0QPSK16QAM20175 Report No.: 14U17673-S1C LTE Band 4 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 47 of 193 UATLATUATLAT10019.8023.7622.8819.00112019.8023.7422.8719.00124019.8023.7622.9119.00120118.9022.8721.9717.90126118.9022.9521.9418.001211118.9022.9721.9518.00250118.9022.9521.9818.0010118.9022.9922.0118.00112118.9022.9722.0818.00124118.9022.9522.0118.00120217.9021.9120.9417.00126217.9021.9920.9617.001211217.9021.9720.9517.00250218.0021.9621.0817.0010019.8023.9422.8718.90112019.9023.9122.8819.00124019.8023.9622.8919.00120118.7022.9522.0017.90126118.8022.9422.0017.901211118.9022.9221.9217.90250118.7022.9621.9218.0010118.9022.9622.0518.00112118.9022.9822.0318.00124118.9022.9622.0518.00120217.9021.9420.9617.00126217.9021.9520.9517.001211217.9021.9420.9617.00250217.9021.9721.0617.0010019.9023.8922.9018.90112019.9023.9222.9619.00124019.8023.9722.7919.00120118.9022.9221.9818.00126118.9022.9621.9118.001211118.9022.9622.0418.00250118.9022.9122.0118.0010118.9022.9922.0718.00112118.9022.9222.0618.00124118.9022.9822.0618.00120217.9021.9321.0717.00126217.9021.9021.0517.001211217.9021.9220.9717.00250217.9021.9821.0817.00203751752.5QPSK16QAM5199751712.5QPSK16QAM201751732.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 4 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 48 of 193 UATLATUATLAT10019.8023.8222.8319.0017019.8023.7122.8419.00114019.8023.7922.9319.0080118.9022.8721.9817.9084118.9022.9421.9518.0087118.9022.9121.9218.00150118.9022.9621.9718.0010118.9022.7321.8118.0017118.9022.7721.8118.00114118.9022.8221.8118.0080217.9021.8821.0217.0084217.9021.9621.0217.0087217.9021.9620.9717.00150218.0021.9221.0317.0010019.8023.9722.9018.9017019.9023.8922.8419.00114019.8023.9522.9019.0080118.7022.9621.9817.9084118.8022.9521.9317.9087118.9022.8821.9517.90150118.7022.9521.9518.0010118.9022.8921.8118.0017118.9022.8121.8118.00114118.9022.8621.8518.0080217.9021.9020.9717.0084217.9021.9320.9717.0087217.9021.9320.9417.00150217.9021.9020.9917.0010019.9023.9822.8618.9017019.9023.9422.9319.00114019.8023.9522.7619.0080118.9022.9421.9618.0084118.9022.9721.9518.0087118.9022.9622.0418.00150118.9022.9321.9818.0010118.9022.8521.9718.0017118.9022.7821.8218.00114118.9022.8921.8818.0080217.9021.9521.0717.0084217.9021.9821.0717.0087217.9021.9920.9717.00150217.9021.8921.1017.00BW(MHz)ChFreq. (MHz)ModeMPR1732.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY203851753.5QPSK16QAM3199651711.5QPSK16QAM20175 Report No.: 14U17673-S1C LTE Band 4 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 49 of 193 UATLATUATLAT10019.8023.8222.8819.0012019.8023.7522.8919.0015019.8023.7522.9819.0030019.9023.7022.7018.9031019.9023.7522.7519.0032019.9023.7822.8019.0060118.9022.9421.9418.0010118.9022.9521.9718.0012118.9022.9021.9118.0015118.9022.9621.9618.0030118.9022.8521.8018.0031118.9022.9021.7518.0032118.9022.8721.8018.0060218.0021.9821.0717.0010019.8023.9723.0018.9012019.9023.9822.9219.0015019.8023.9622.9519.0030019.7023.9022.7018.9031019.8023.8522.7518.9032019.9023.8822.7318.9060118.7022.9521.9718.0010118.9022.9821.9718.0012118.9022.9221.9418.0015118.9022.9621.9618.1030118.9022.9021.8718.0031118.9022.9521.8018.0032118.9022.9021.8518.0060217.9022.0121.0817.0010019.7023.9922.8518.9012019.8023.9222.9919.0015019.7023.9022.7619.0030019.8023.8522.7019.0031019.8023.9022.7519.0032019.8023.8622.7218.9060118.8022.9722.0618.0010118.7022.9622.0318.0012118.6022.9121.9718.0015118.7022.9422.0418.1030118.9022.8721.8518.0031118.9022.9021.9018.0032118.9022.9521.8717.9060217.9021.9321.0417.00BW(MHz)ChFreq. (MHz)ModeMPR1732.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY203931754.3QPSK16QAM1.4199571710.7QPSK16QAM20175 Report No.: 14U17673-S1C 8.4.3. LTE Band 5 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 50 of 193 UATLATUATLAT10023.6024.0023.6024.00124023.6024.0023.6024.00149023.6024.0023.6024.00250122.6723.0022.6723.002512122.6023.0022.6023.002524122.7323.0022.7323.00500122.7023.0022.7023.0010122.4022.7322.4022.73124122.4722.6122.4722.61149122.4922.7122.4922.71250221.6221.8621.6221.862512221.6721.8721.6721.872524221.7121.8821.7121.88500221.6721.9121.6721.9110023.6024.0023.6024.00124023.7024.0023.7024.00149023.7024.0023.7024.00250122.7023.0022.7023.002512122.7023.0022.7023.002524122.7023.0022.7023.00500122.7023.0022.7023.0010122.5022.6522.5022.65124122.4422.6822.4422.68149122.4022.6222.4022.62250221.7021.8121.7021.812512221.6821.8321.6821.832524221.6321.7921.6321.79500221.6321.8421.6321.8410023.7024.0023.7024.00124023.7024.0023.7024.00149023.7024.0023.7024.00250122.7023.0022.7023.002512122.6023.0022.6023.002524122.7023.0022.7023.00500122.7023.0022.7023.0010122.3722.6422.3722.64124122.3422.7222.3422.72149122.3122.7422.3122.74250221.6121.7421.6121.742512221.5921.8421.5921.842524221.6821.8521.6821.85500221.5621.8521.5621.85BW(MHz)ChFreq. (MHz)ModeMPR836.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY20600844.0QPSK16QAM1020450829.0QPSK16QAM20525 Report No.: 14U17673-S1C LTE Band 5 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 51 of 193 UATLATUATLAT10023.4923.7923.4923.79112023.4823.7823.4823.78124023.5723.7323.5723.73120122.5522.9722.5522.97126122.5722.9022.5722.901211122.5722.9422.5722.94250122.6622.9022.6622.9010122.6522.6222.6522.62112122.6522.6022.6522.60124122.6522.7022.6522.70120221.6521.8421.6521.84126221.6021.7921.6021.791211221.6221.8321.6221.83250221.6721.9521.6721.9510023.5323.7523.5323.75112023.5023.7223.5023.72124023.5123.7323.5123.73120122.6622.8322.6622.83126122.6622.8222.6622.821211122.6422.8022.6422.80250122.6822.8522.6822.8510122.6622.6522.6622.65112122.6822.6622.6822.66124122.6622.5522.6622.55120221.6521.7821.6521.78126221.6121.7221.6121.721211221.6721.7321.6721.73250221.6821.7321.6821.7310023.5123.7623.5123.76112023.4523.7123.4523.71124023.4123.8723.4123.87120122.6622.8422.6622.84126122.5922.8522.5922.851211122.5622.8622.5622.86250122.6222.9022.6222.9010122.5722.6522.5722.65112122.5422.6222.5422.62124122.5522.6622.5522.66120221.6821.6321.6821.63126221.5921.7721.5921.771211221.5721.7421.5721.74250221.6321.7121.6321.71BW(MHz)ChFreq. (MHz)ModeMPR836.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY20625846.5QPSK16QAM520425826.5QPSK16QAM20525 Report No.: 14U17673-S1C LTE Band 5 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 52 of 193 UATLATUATLAT10023.5723.8423.5723.8417023.5123.7523.5123.75114023.5523.8023.5523.8080122.5322.9222.5322.9284122.5722.7422.5722.7487122.5622.9422.5622.94150122.6722.9622.6722.9610122.4722.5722.4722.5717122.4222.6122.4222.61114122.4922.6022.4922.6080221.6721.8921.6721.8984221.6621.7821.6621.7887221.6721.8721.6721.87150221.6721.8921.6721.8910023.5723.7523.5723.7517023.5123.7023.5123.70114023.5023.7723.5023.7780122.6722.8522.6722.8584122.6522.8322.6522.8387122.6122.8522.6122.85150122.7022.8222.7022.8210122.5322.6722.5322.6717122.4822.6622.4822.66114122.4522.4622.4522.4680221.6621.7921.6621.7984221.6721.6121.6721.6187221.6821.6121.6821.61150221.7021.8021.7021.8010023.5223.7923.5223.7917023.4423.7523.4423.75114023.4123.8623.4123.8680122.6422.8222.6422.8284122.5722.9422.5722.9487122.4522.8922.4522.89150122.6022.9122.6022.9110122.4622.6022.4622.6017122.3922.6922.3922.69114122.3322.6122.3322.6180221.6621.6321.6621.6384221.6421.7021.6421.7087221.5321.7021.5321.70150221.6421.7621.6421.76BW(MHz)ChFreq. (MHz)ModeMPR836.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY20635847.5QPSK16QAM320415825.5QPSK16QAM20525 Report No.: 14U17673-S1C LTE Band 5 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 53 of 193 UATLATUATLAT10023.6023.8823.6023.8812023.5523.8623.5523.8615023.5823.7723.5823.7730023.5023.7023.5023.7031023.4823.7223.4823.7232023.5223.6523.5223.6560122.6822.8822.6822.8810122.6722.5922.6722.5912122.6522.5722.6522.5715122.6922.4422.6922.4430122.5022.3022.5022.3031122.5122.3522.5122.3532122.6022.4022.6022.4060221.6721.9021.6721.9010023.5823.7623.5823.7612023.5323.7223.5323.7215023.5723.7623.5723.7630023.4023.6023.4023.6031023.4523.5523.4523.5532023.4823.5823.4823.5860122.6622.8422.6622.8410122.6622.4822.6622.4812122.6722.4822.6722.4815122.7022.4722.7022.4730122.6022.3022.6022.3031122.5022.2522.5022.2532122.6122.3522.6122.3560221.6121.7021.6121.7010023.4023.9423.4023.9412023.4123.8623.4123.8615023.4023.9223.4023.9230023.3023.7023.3023.7031023.3523.7523.3523.7532023.3623.8023.3623.8060122.5222.8722.5222.8710122.4822.6122.4822.6112122.4822.6222.4822.6215122.5222.5822.5222.5830122.4022.4022.4022.4031122.4522.4522.4522.4532122.4822.5022.4822.5060221.5721.7121.5721.71BW(MHz)ChFreq. (MHz)ModeMPR836.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY20643848.3QPSK16QAM1.420407824.7QPSK16QAM20525 Report No.: 14U17673-S1C 8.4.4. LTE Band 13 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 54 of 193 UATLATUATLAT10023.7024.0023.7024.00124023.7024.0023.7024.00149023.6024.0023.6024.00250122.6023.0022.6023.002512122.7023.0022.7023.002524122.6023.0022.6023.00500122.7023.0022.7023.0010122.6022.7622.6022.76124122.7022.6522.7022.65149122.7022.7822.7022.78250221.8521.9121.8521.912512221.8221.8621.8221.862524221.7921.8321.7921.83500221.8321.9121.8321.911023230782.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 13 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 55 of 193 UATLATUATLAT10023.6123.7423.6123.74112023.5823.7323.5823.73124023.5123.7723.5123.77120122.5722.8722.5722.87126122.5822.8722.5822.871211122.4422.8722.4422.87250122.6722.8522.6722.8510122.4022.7622.4022.76112122.5522.7222.5522.72124122.6322.6422.6322.64120221.4621.8221.4621.82126221.5021.8121.5021.811211221.5221.8121.5221.81250221.5421.7821.5421.7810023.6123.7423.6123.74112023.5823.7323.5823.73124023.5623.7723.5623.77120122.5722.8722.5722.87126122.6822.8722.6822.871211122.5922.8722.5922.87250122.6722.8522.6722.8510122.5522.7622.5522.76112122.6522.7722.6522.77124122.6322.7422.6322.74120221.5621.8221.5621.82126221.5521.8121.5521.811211221.5721.8121.5721.81250221.5921.8821.5921.8810023.6123.7423.6123.74112023.5823.7323.5823.73124023.5623.7723.5623.77120122.5722.8722.5722.87126122.6822.8722.6822.871211122.5422.8722.5422.87250122.6722.8522.6722.8510122.5522.7622.5522.76112122.6522.7722.6522.77124122.6822.6422.6822.64120221.5621.8221.5621.82126221.5521.8121.5521.811211221.5721.8121.5721.81250221.5921.8821.5921.8823230Avg Pwr (dBm)HEADBODY23255784.5QPSK16QAM782.0QPSK16QAMUL RB AllocationUL RB Start16QAMBW(MHz)ChFreq. (MHz)ModeMPR23207779.5QPSK5 Report No.: 14U17673-S1C 8.4.5. LTE Band 17 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 56 of 193 UATLATUATLAT10023.6723.7523.6723.75124023.5823.8523.5823.85149023.6323.8223.6323.82250122.8222.9322.8222.932512122.7423.0122.7423.012524122.7422.9922.7422.99500122.7923.0222.7923.0210122.5622.7622.5622.76124122.5222.8022.5222.80149122.5022.7422.5022.74250221.7821.9121.7821.912512221.8021.9621.8021.962524221.8022.0221.8022.02500221.7322.0321.7322.0310023.7024.0023.7024.00124023.7024.0023.7024.00149023.7024.0023.7024.00250122.7023.0022.7023.002512122.7023.0022.7023.002524122.6023.0022.6023.00500122.7023.0022.7023.0010122.5922.7022.5922.70124122.4822.7422.4822.74149122.7222.7822.7222.78250221.7822.0121.7822.012512221.7922.0221.7922.022524221.8121.9921.8121.99500221.7422.0221.7422.0210023.6523.7323.6523.73124023.5923.8723.5923.87149023.7023.8123.7023.81250122.8223.0422.8223.042512122.7623.0022.7623.002524122.7822.9522.7822.95500122.7723.0322.7723.0310122.5722.7022.5722.70124122.5422.7622.5422.76149122.7022.7622.7022.76250221.7922.0021.7922.002512221.7621.9821.7621.982524221.7521.9921.7521.99500221.7721.9921.7721.99Avg Pwr (dBm)HEADBODY23800711.0QPSK16QAM23780709.0MPR710.0QPSK16QAMUL RB AllocationUL RB StartQPSK16QAMBW(MHz)ChFreq. (MHz)Mode2379010 Report No.: 14U17673-S1C LTE Band 17 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 57 of 193 UATLATUATLAT10023.7023.8023.7023.80112023.6423.7623.6423.76124023.6623.9023.6623.90120122.6722.9622.6722.96126122.6722.9422.6722.941211122.5922.9622.5922.96250122.6722.9022.6722.9010122.2922.7522.2922.75112122.2922.8022.2922.80124122.1822.7422.1822.74120221.1521.8821.1521.88126221.2221.8721.2221.871211221.2621.9821.2621.98250221.2721.9621.2721.9610023.6223.7823.6223.78112023.5923.8323.5923.83124023.6323.8723.6323.87120122.6722.9622.6722.96126122.6723.0022.6723.001211122.5722.9722.5722.97250122.6422.9822.6422.9810122.2622.7922.2622.79112122.2522.7422.2522.74124122.1622.7722.1622.77120221.1521.9321.1521.93126221.2521.9421.2521.941211221.2521.9521.2521.95250221.2721.9821.2721.9810023.6023.8623.6023.86112023.6223.7923.6223.79124023.6723.8123.6723.81120122.6922.9722.6922.97126122.6822.9722.6822.971211122.5922.9422.5922.94250122.6722.9822.6722.9810122.2722.7922.2722.79112122.2722.7922.2722.79124122.1922.7922.1922.79120221.1721.9421.1721.94126221.2421.9121.2421.911211221.2421.9121.2421.91250221.2421.9321.2421.93BW(MHz)ChFreq. (MHz)237905MPRQPSK710.0QPSK16QAMUL RB AllocationUL RB Start16QAMAvg Pwr (dBm)HEADBODY23825713.5QPSK16QAM23755706.5Mode Report No.: 14U17673-S1C 8.4.6. LTE Band 25 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 58 of 193 UATLATUATLAT10019.9023.4023.1018.40149019.9023.5023.2018.50199019.9023.4023.1018.30500119.1022.4022.1017.505024119.1022.4022.2017.505049119.1022.4022.1017.401000119.1022.4022.3017.5010119.1022.4021.8017.50149119.1022.4021.9217.40199119.1022.4022.0517.43500218.1021.4021.0616.805024218.1021.4021.1416.565049218.1021.4021.3016.501000218.1021.4021.1616.5010020.1023.5023.4018.30149020.1023.5023.4018.50199020.1023.5023.3018.40500119.1022.5022.3017.505024119.1022.5022.4017.505049119.1022.5022.4017.501000119.1022.4022.3017.5010119.0022.4022.0217.50149119.0022.4021.9917.50199119.1022.4021.9217.43500218.1021.5021.3516.805024218.1021.5021.2816.565049218.1021.5021.2016.501000218.1021.5021.2816.5010019.9023.3023.2018.40149019.9023.4023.4018.50199019.9023.4023.3018.30500119.1022.4022.2017.405024119.1022.4022.4017.505049119.1022.4022.3017.501000119.1022.4022.3017.5010119.0022.4021.9817.50149119.1022.3021.9817.40199119.1022.4022.0017.43500218.1021.4021.3816.805024218.1021.5021.4016.565049218.1021.5021.3916.501000218.1021.5021.3916.50265901905.0QPSK16QAM20261401860.0QPSK16QAM263651882.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 25 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 59 of 193 UATLATUATLAT10019.9023.2123.0418.40137019.9023.2123.0818.50174019.9023.2123.0918.30360119.1022.3622.0817.503616119.1022.3922.1917.503635119.1022.3422.0417.40750119.1022.3322.2417.5010119.1022.1421.8417.50137119.1022.1121.8817.40174119.1022.1121.9817.43360218.1021.3721.0516.803616218.1021.3521.0816.563635218.1021.3321.1616.50750218.1021.3521.1316.5010020.1023.2223.2418.30137020.1023.2123.1818.50174020.1023.2423.0718.40360119.1022.4422.2817.503616119.1022.4822.3117.503635119.1022.3622.2417.50750119.1022.3022.2417.5010119.0022.1121.9617.50137119.0022.1121.9417.50174119.1022.1221.8417.43360218.1021.4721.3616.803616218.1021.5021.2716.563635218.1021.3921.2016.50750218.1021.5721.2816.5010019.9023.0423.1618.40137019.9023.1123.2618.50174019.9023.1023.2018.30360119.1022.2422.0717.403616119.1022.2722.3417.503635119.1022.1922.3017.50750119.1022.2822.2017.5010119.0022.1121.9717.50137119.1022.0022.0017.40174119.1022.1121.9717.43360218.1021.2321.3516.803616218.1021.2621.3716.563635218.1021.2121.3616.50750218.1021.2621.3816.50266151907.5QPSK16QAM15261151857.5QPSK16QAM263651882.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 25 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 60 of 193 UATLATUATLAT10019.9023.3723.0218.40124020.1023.3223.0618.30149020.0023.3023.0718.30250118.9022.3722.0417.402512118.9022.3422.1317.302524119.0022.3722.0817.40500119.0022.3922.0717.4010118.9022.2121.8317.40124118.8022.1721.8917.40149118.8022.1921.9017.40250217.9021.3721.1016.402512218.0021.3321.0916.502524218.0021.3621.1216.30500218.0021.3521.0516.4010020.1023.4023.2418.40124019.9023.4423.1818.40149019.9023.5023.0818.40250119.0022.4622.2417.502512119.0022.4022.2717.302524119.0022.3822.1817.30500119.0022.3222.2717.4010119.1022.2821.9317.40124118.8022.3021.9917.40149118.8022.3721.9617.40250218.0021.4021.3216.502512218.0021.4521.2116.502524218.1021.4621.1616.30500218.0021.4621.2616.4010020.1023.1823.0618.30124019.9023.3023.3218.50149019.9023.3923.1418.50250119.0022.2822.1217.402512119.0022.2922.3617.402524119.0022.3022.3017.30500119.1022.1522.2917.5010119.1022.3121.9117.50124119.0022.2621.9817.50149118.9022.2621.9617.50250218.0021.3321.3016.502512218.0021.2521.3316.402524218.0021.2721.3916.40500218.1021.4921.3116.40266401910.0QPSK16QAM10260901855.0QPSK16QAM263651882.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 25 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 61 of 193 UATLATUATLAT10020.0023.3123.0218.30112019.9023.3122.9918.30124019.9023.3623.0818.40120119.0022.3622.0717.30126119.1022.3422.0817.301211118.8022.3622.0817.30250118.8022.3922.0917.3010118.8022.3521.9717.30112118.8022.3121.9417.30124119.0022.3422.0817.40120217.9021.3921.0516.40126218.0021.3921.0016.401211218.0021.3621.0016.30250218.0021.3321.2016.3010019.9023.2723.2418.30112019.9023.2123.1418.30124019.9023.2423.0718.30120119.0022.4322.2717.40126119.0022.3822.2217.401211118.8022.3322.2017.40250119.0022.3322.1917.4010119.0022.3721.9617.40112119.0022.3821.9717.40124119.0022.3621.9817.40120218.1021.3721.2816.30126218.1021.3821.2216.301211218.1021.2321.1916.30250218.1021.5721.2616.4010019.9023.0723.0918.30112020.0023.1023.2818.40124020.0023.1223.1718.30120119.1022.1922.1017.40126119.0022.1522.3617.401211119.1022.1322.2317.40250119.1022.1322.2917.4010118.8022.3321.9217.40112119.0022.2321.9417.40124119.1022.2621.9717.50120218.0021.1521.3016.30126218.1021.2121.3116.301211218.1021.2021.3616.40250218.1021.2621.3816.40266651912.5QPSK16QAM5260651852.5QPSK16QAM263651882.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 25 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 62 of 193 UATLATUATLAT10020.0023.3723.0518.5017020.0023.2423.0118.50114020.0023.3323.0618.5080119.0022.3622.0517.4084119.0022.3522.0817.3087119.0022.3922.0417.30150119.0022.3422.0717.3010119.0022.2421.9817.4017119.0022.2021.8417.40114119.0022.2821.9217.4080218.0021.3921.0716.3084217.9021.3321.0816.5087218.0021.3921.0716.50150217.9021.3421.0616.5010020.0023.3223.3018.5017019.9023.2223.1418.50114019.9023.2523.0918.5080119.1022.3922.2017.4084119.0022.3922.1917.5087119.0022.3022.2617.30150119.0022.3422.1917.3010119.0022.2321.9517.3017119.0022.1121.9917.30114119.0022.1821.9817.5080218.1021.4521.2716.4084217.9021.4621.2416.4087218.0021.4021.2416.40150218.0021.4121.2716.4010019.9023.0923.1118.4017019.9023.1223.2618.40114020.1023.1123.2218.4080119.1022.1722.0917.4084119.0022.1022.3917.5087119.1022.1222.2717.30150119.1022.1922.2717.4010119.1022.1121.9917.3017119.0022.0221.9817.30114119.1022.1021.9717.5080218.0021.2121.3416.4084218.1021.2121.3316.4087218.1021.2121.3516.40150218.0021.2121.3716.40266751913.5QPSK16QAM3260551851.5QPSK16QAM263651882.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 25 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 63 of 193 UATLATUATLAT10020.0023.3223.0418.3012019.8023.3223.0318.5015019.8023.3623.0618.3030019.8023.2523.0018.3031019.8023.2022.9918.4032019.8023.2623.0118.4060119.0022.1222.1117.5010118.9022.1121.9617.5012118.9022.1321.9517.5015118.9022.1322.0917.4030118.9022.1021.8017.4031119.1022.0521.8517.4032119.1022.0021.8217.3060218.0021.1021.1416.5010019.9023.3723.2418.4012019.8023.3023.1918.4015019.8023.2823.2918.3030019.9023.4123.1018.3031019.9023.3023.0518.3032019.9023.2823.1218.3060118.9022.3722.2217.4010119.0022.3221.9617.4012119.0022.3421.9517.3015119.1022.2821.9817.3030119.1022.2521.8017.3031118.9022.2021.7517.3032118.9022.1821.7617.3060218.0021.4721.2916.5010019.9023.1023.1618.4012020.0023.1123.3918.4015020.0023.1323.2518.4030019.9023.1623.1218.3031019.9023.0923.2018.3032019.9023.1523.2518.3060118.9022.1522.3017.5010119.1022.1521.9817.4012119.0022.1121.9917.4015119.1022.1121.9817.3030119.1022.1521.7017.3031118.9022.1121.7517.3032118.9022.0921.8017.5060217.8021.3121.3716.40BW(MHz)ChFreq. (MHz)ModeMPR1882.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY266831914.3QPSK16QAM1.4260471850.7QPSK16QAM26365 Report No.: 14U17673-S1C 8.4.7. LTE Band 26 Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 64 of 193 UATLATUATLAT10022.9023.0022.9023.00124023.0023.0023.0023.00149023.0023.0023.0023.00250121.8021.9021.8021.902512122.0022.0022.0022.002524121.9022.0021.9022.00500122.0022.0022.0022.0010121.6421.6421.6421.64124121.9721.7721.9721.77149121.8621.7621.8621.76250220.7420.7320.7420.732512220.7020.7620.7020.762524220.4620.7020.4620.70500220.7220.6020.7220.601026740819.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPRUATLATUATLAT10022.8022.8622.8022.86112022.7722.8122.7722.81124022.7922.8222.7922.82120121.9022.0021.9022.00126121.9121.9721.9121.971211121.9121.9421.9121.94250121.8821.9621.8821.9610121.9921.9921.9921.99112121.9821.9821.9821.98124122.0022.0022.0022.00120220.8920.9520.8920.95126220.8920.8920.8920.891211220.8820.9020.8820.90250220.8020.9020.8020.90UL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR526865821.3QPSK16QAMUL RB Allocation Report No.: 14U17673-S1C LTE Band 26 Measured Results (continued) Issue Date: 8/15/2014 Note(s):

10/5 MHz Bandwidths does not support at least three non-overlapping channels in certain channel bandwidths. When a device supports overlapping channel assignment in a channel bandwidth configuration, the middle channel of the group of overlapping channels should be selected for testing per KDB941225 D05 SAR for LTE Devices. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 65 of 193 UATLATUATLAT10022.8422.8922.8422.8917022.7922.8022.7922.80114022.7922.8422.7922.8480121.9422.0221.9422.0284121.9421.9921.9421.9987121.8721.9721.8721.97150121.9621.9721.9621.9710121.8021.8121.8021.8117121.6921.7221.6921.72114121.7221.7521.7221.7580220.9721.0020.9721.0084220.9621.0020.9621.0087220.9420.9720.9420.97150220.9620.9720.9620.9710022.8322.8822.8322.8817022.7522.7622.7522.76114022.8122.8222.8122.8280121.8921.9721.8921.9784121.9121.9921.9121.9987121.8621.9721.8621.97150121.9421.9421.9421.9410121.7221.8321.7221.8317121.6621.7521.6621.75114121.7121.7621.7121.7680220.9720.9820.9720.9884220.9420.9820.9420.9887220.9620.9820.9620.98150220.9720.9820.9720.9810022.8522.9122.8522.9117022.7422.7922.7422.79114022.8022.8422.8022.8480121.9121.9521.9121.9584121.8821.9621.8821.9687121.8621.9921.8621.99150121.9221.9921.9221.9910121.7321.8121.7321.8117121.7021.7421.7021.74114121.6821.7721.6821.7780220.9620.9720.9620.9784220.9520.9820.9520.9887220.9420.9520.9420.95150220.8920.9620.8920.963BW(MHz)ChFreq. (MHz)ModeMPR26865821.3QPSK16QAMUL RB AllocationUL RB Start16QAMAvg Pwr (dBm)HEADBODY27025822.3QPSK16QAM26705820.3QPSK Report No.: 14U17673-S1C Issue Date: 8/15/2014 8.4.8. LTE Band 41 Measured Results Procedure used to establish SAR test signal for LTE TDD Band 41 Set to CMW-500 with following parameters:

Turn the LTE Signaling off using ON | OFF key Operating Band: Select Band 41 and TDD Go to Config. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 66 of 193 Report No.: 14U17673-S1C Go to Physical Cell Setup Select TDD and Set Uplink Downlink Configuration to 0 Turn the cell on using ON | OFF key Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 67 of 193 Report No.: 14U17673-S1C Connect to EUT Turn the cell on using ON | OFF key After EUT is Attached Select Connect Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 68 of 193 Report No.: 14U17673-S1C Max Power Setting Select LTE 1 TX Meas. Press RESTART | STOP Soft key Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 69 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 Select Signaling Parameter Select TX Power Control (TPC) > Select Active TPC Setup to Max Power > Set Closed Loop Target Power to 23 dBm UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 70 of 193 Report No.: 14U17673-S1C View TX Power Go to Display Select Select View Select Spectrum Emission Mask Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 71 of 193 Report No.: 14U17673-S1C Measured Results Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 72 of 193 UATLATUATLAT10022.5022.5022.5019.00149022.5022.5022.5019.00199022.4022.5022.4019.00500121.5021.4021.5018.005024121.5021.4021.5018.005049121.4021.4021.4018.001000121.5021.4021.5018.0010121.4021.4421.4018.00149121.4021.6221.4018.00199121.4021.6321.4018.00500220.4020.6220.4017.005024220.4020.7020.4017.005049220.4020.6220.4017.001000220.5020.6320.5017.0010022.5022.5022.5018.90149022.5022.5022.5019.00199022.4022.5022.4019.00500121.5021.5021.5018.005024121.5021.4021.5018.005049121.5021.5021.5018.001000121.5021.5021.5018.0010121.5021.4821.5018.00149121.5021.4721.5018.00199121.5021.4621.5018.00500220.5020.5120.5017.005024220.5020.4920.5017.005049220.5020.4720.5017.001000220.5020.5120.5017.0010022.4022.5022.4019.00149022.5022.5022.5019.00199022.5022.5022.5019.00500121.5021.4021.5018.005024121.5021.4021.5018.005049121.5021.4021.5018.001000121.5021.5021.5018.0010121.5021.4821.5018.00149121.5021.4721.5018.00199121.5021.4621.5018.00500220.4020.5120.4017.005024220.5020.4920.5017.005049220.5020.4720.5017.001000220.5020.5120.5017.00406202593.0QPSK16QAM20397502506.0QPSK16QAM401852549.5QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeMPR Report No.: 14U17673-S1C LTE Band 41 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 73 of 193 UATLATUATLAT10022.5022.5022.5019.00149022.5022.3022.5018.80199022.5022.2022.5018.70500121.5021.5021.5018.005024121.5021.2021.5018.005049121.5021.2021.5018.001000121.5021.3021.5018.0010121.5021.4821.5018.00149121.5021.4721.5018.00199121.4021.4621.4018.00500220.5020.5120.5017.005024220.5020.4920.5017.005049220.5020.4720.5017.001000220.5020.5120.5017.0010022.4022.0022.4019.00149022.4022.3022.4019.00199022.4022.3022.4019.00500121.3021.0021.3018.005024121.4021.3021.4018.005049121.3021.3021.3018.001000121.4021.1021.4018.0010121.4021.4821.4018.00149121.4021.4721.4018.00199121.4021.4621.4018.00500220.4020.5120.4017.005024220.4020.4920.4017.005049220.4020.4720.4017.001000220.4020.5120.4017.00BW(MHz)ChFreq. (MHz)Mode414902680.0QPSK16QAM2041055Avg Pwr (dBm)HEADBODYMPR2636.5QPSK16QAMUL RB AllocationUL RB Start Report No.: 14U17673-S1C LTE Band 41 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 74 of 193 UATLATUATLAT10022.3222.4422.3218.90137022.2222.4922.2218.90174022.2522.4822.2518.90360121.2021.3121.2017.903616121.2121.3721.2117.703635121.2421.3921.2417.80750121.2221.2921.2217.8010121.1521.1421.1517.70137121.1321.1021.1317.70174121.1321.1121.1317.70360220.2520.3420.2516.903616220.2120.3120.2117.003635220.3020.3620.3016.90750220.2620.4620.2616.9010022.4022.4022.4018.90137022.4022.4022.4018.90174022.4022.4022.4018.90360121.4021.5021.4017.903616121.4021.4021.4017.903635121.4021.2021.4017.90750121.4021.2021.4017.9010121.4021.2021.4017.90137121.4021.1021.4018.00174121.4021.2021.4017.80360220.2020.4020.2016.803616220.2020.3020.2016.803635220.2020.3020.2016.80750220.2020.3020.2016.8010022.1822.3522.1818.90137022.2022.4322.2018.90174022.2622.4922.2618.90360121.2121.4021.2117.903616121.2621.3021.2617.903635121.2221.4421.2217.90750121.2321.4421.2317.7010121.2821.2121.2817.70137121.2021.2221.2017.70174121.2121.2221.2117.70360220.2420.3220.2416.803616220.2120.4420.2116.803635220.2220.4120.2216.80750220.2220.4820.2216.80BW(MHz)ChFreq. (MHz)ModeMPR2548.3QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY406202593.0QPSK16QAM15397252503.5QPSK16QAM40173 Report No.: 14U17673-S1C LTE Band 41 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 75 of 193 UATLATUATLAT10022.4022.3022.4018.90137022.4022.3022.4018.90174022.3022.3022.3018.70360121.5021.5021.5017.903616121.5021.2021.5017.903635121.5021.2021.5017.90750121.5021.3021.5017.7010121.5021.5021.5017.70137121.5021.5021.5017.70174121.4021.4021.4017.80360220.4020.5020.4016.903616220.4020.5020.4016.903635220.4020.5020.4016.90750220.4020.3020.4016.8010022.3621.9822.3618.90137022.1422.2522.1418.90174022.1122.1822.1118.90360121.0220.9521.0217.903616121.1521.2221.1517.903635121.0121.2321.0117.90750121.1321.0121.1317.7010121.1221.1121.1217.70137121.1221.1121.1217.70174121.1421.1121.1417.70360220.1520.1520.1517.003616220.1320.1420.1316.903635220.1120.2720.1116.90750220.1020.2720.1016.8015MPRQPSK16QAM410682637.8QPSK16QAM415152682.5Avg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeUL RB AllocationUL RB Start Report No.: 14U17673-S1C LTE Band 41 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 76 of 193 UATLATUATLAT10022.3122.4822.3118.80124022.2022.5022.2018.80149022.1922.4822.1918.80250121.2321.3721.2317.802512121.2221.3121.2217.702524121.1121.3921.1117.80500121.2221.3721.2217.8010121.1721.1421.1717.70124121.1621.1221.1617.80149121.1521.1121.1517.80250220.2320.3020.2316.902512220.2120.3120.2117.002524220.2220.4020.2216.70500220.2020.4820.2016.8010022.4022.2022.4018.70124022.5022.2022.5018.70149022.5022.4022.5018.90250121.5021.5021.5017.702512121.5021.4021.5017.702524121.5021.2021.5017.70500121.5021.2021.5017.7010121.5021.2021.5017.90124121.5021.1021.5017.80149121.5021.2021.5017.80250220.3020.4020.3016.802512220.3020.5020.3016.802524220.3020.3020.3016.80500220.3020.1020.3016.8010022.2422.4122.2418.80124022.2222.4422.2218.80149022.2522.4322.2518.80250121.2121.3221.2117.802512121.2221.3521.2217.802524121.2221.3821.2217.80500121.2221.4721.2217.8010121.2821.2021.2817.80124121.2321.2421.2317.70149121.2421.2321.2417.80250220.1120.3820.1116.802512220.2120.4020.2116.802524220.2120.4720.2116.90500220.2220.4220.2216.80BW(MHz)ChFreq. (MHz)ModeMPR2547.0QPSK16QAMUL RB AllocationUL RB StartAvg Pwr (dBm)HEADBODY406202593.0QPSK16QAM10397002501.0QPSK16QAM40160 Report No.: 14U17673-S1C LTE Band 41 Measured Results (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 77 of 193 UATLATUATLAT10022.5022.4022.5018.70124022.5022.3022.5018.70149022.5022.3022.5018.80250121.5021.3021.5017.702512121.5021.3021.5017.902524121.5021.2021.5017.90500121.5021.3021.5017.7010121.5021.3021.5017.70124121.5021.3021.5017.70149121.4021.4021.4017.80250220.3020.4020.3016.902512220.3020.4020.3016.902524220.3020.4020.3016.80500220.3020.2020.3016.8010022.1421.9722.1418.80124022.1322.1822.1318.80149022.1422.1522.1418.80250121.0320.9721.0317.802512121.1421.2621.1417.802524121.0221.2621.0217.80500121.1521.0721.1517.8010121.1021.1121.1017.80124121.1121.1121.1117.80149121.1521.1121.1517.80250220.1120.3020.1117.002512220.1420.2720.1416.902524220.1220.2520.1216.90500220.1220.2120.1216.80Avg Pwr (dBm)HEADBODYBW(MHz)ChFreq. (MHz)ModeUL RB AllocationUL RB Start10MPRQPSK16QAM410802639.0QPSK16QAM415402685.0 Report No.: 14U17673-S1C 8.5. LTE Rel. 10 Carrier Aggregation Issue Date: 8/15/2014 Carrier Aggregation is implemented for downlink only; therefore uplink maximum output power (single carrier) was measured. Refer to standalone output power. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 78 of 193 Report No.: 14U17673-S1C 8.6. Wi-Fi (2.4 GHz Band) Required Test Channels per KDB 248227 D01 Mode Band 802.11b/g 2.4 GHz Issue Date: 8/15/2014 GHz 2.412 2.437 2.462 Channel 1#

6 11#

Default Test Channels 802.11b 802.11g Notes:

= default test channels

= possible 802.11g channels with maximum average output dB the default test channels

# = when output power is reduced for channel 1 and /or 11 to meet restricted band requirements the highest output channels closest to each of these channels should be tested. For 2.4 GHz band, there are two use cases:

PCell_ON: This will be used when both Cellular and Wi-Fi radios are ON. PCell_OFF: This will be used when only Wi-Fi radio is ON 8.6.1. PCell_ON (Plow) Measured Results Note(s):

1. Per KDB 248227 D01, SAR is not required for 802.11g/HT20 channels when the maximum average output power is less than 1/4 dB higher than that measured on the corresponding 802.11b channels. 2. Additionally, SAR is not required for Channels 12 and 13 because the tune-up limit and the measured output power for these two channels are no greater than those for the default test channels. Power measurements to determine worst-case data rates UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 79 of 193 Variant 31241215.006243715.0011246215.0012246715.0013247215.001241215.006243715.0011246215.0012246715.0013247215.001241215.006243715.0011246215.0012246715.0013247215.00Freq. (MHz)802.11b802.11gAvg Pwr(dBm)6 MbpsSAR Test(Yes/No)802.11n (HT20)NoMCS 01 MbpsBand(GHz)Data RateNoModeCh #Yes2.4Variant 31 Mbps15.00Yes2 Mbps15.00No5.5 Mbps15.00No11 Mbps15.00NoSAR test(Yes/No)Avg Pwr (dBm)Mode802.11b62437Ch #Freq. (MHz)Data Rate Report No.: 14U17673-S1C 8.6.2. PCell_OFF (Pmax) Measured Results Issue Date: 8/15/2014 Note(s):

1. Per KDB 248227 D01, SAR is not required for 802.11g/HT20 channels when the maximum average output power is less than 1/4 dB higher than that measured on the corresponding 802.11b channels. 2. Additionally, SAR is not required for Channels 12 and 13 because the tune-up limit and the measured output power for these two channels are no greater than those for the default test channels. Power measurements to determine worst-case data rates UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 80 of 193 Variant 31241218.006243718.0011246218.0012246716.5013247215.501241214.004242718.006243718.009245217.9011246216.0012246712.001324725.001241213.906243717.9011246216.0012246712.001324725.006 MbpsFreq. (MHz)802.11b802.11gAvg Pwr(dBm)SAR Test(Yes/No)NoNoCh #Band(GHz)Mode2.4Data Rate1 Mbps802.11n (HT20)YesMCS 0Variant 31 Mbps18.00Yes2 Mbps18.00No5.5 Mbps18.00No11 Mbps18.00NoAvg Pwr (dBm)Mode802.11b62437Ch #Freq. (MHz)Data RateSAR test(Yes/No) Report No.: 14U17673-S1C 8.7. Wi-Fi (5 GHz Bands) Required Test Channels per KDB 248227 D01 8.7.1. Head Power Table Measured Results Issue Date: 8/15/2014 Note(s):

1. For each frequency band, testing at higher data rates and higher order modulations is not required when the maximum average output power for each of these configurations is < dB higher than those measured at the lowest data rate. 2. SAR evaluation for 802.11ac is required based on the highest 802.11a configuration per April 2013 TCB Workshop. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 81 of 193 Variant 336518012.0040520011.9044522011.9048524012.0036518011.9040520011.9048524011.9038519011.9046523011.9036518012.0040520011.9048524011.9038519011.9046523011.90802.11ac(HT80)MCS042521011.90No52526011.0056528011.0060530011.0064532011.0052526011.0060530011.0064532011.0054527011.0062531011.0052526011.0060530011.0064532011.0054527011.0062531011.00802.11ac(HT80)MCS058529011.00NoMCS0YesNoNoYesNoYesNoNoYesMCS0MCS0802.11n (HT40)5.3802.11ac (HT40)802.11n (HT20)802.11a5.2NoMCS0802.11a802.11n (HT20)802.11n (HT40)802.11ac (HT20)MCS0MCS06 Mbps802.11ac (HT20)6 MbpsMCS0MCS0802.11ac (HT40)Band(GHz)ModeData RateCh #Freq. (MHz)SAR Test (Yes/No)Avg Pwr(dBm) Report No.: 14U17673-S1C Wi-Fi (5 GHz Bands) Measured Results (continued) Issue Date: 8/15/2014 Note(s):

1. For each frequency band, testing at higher data rates and higher order modulations is not required when the maximum average output power for each of these configurations is < dB higher than those measured at the lowest data rate. 2. SAR evaluation for 802.11ac is required based on the highest 802.11a configuration per April 2013 TCB Workshop. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 82 of 193 Variant 310055009.0010455209.0010855408.8011255609.0011655809.0012056009.0012456209.0012856409.0013256609.0013656808.9014057009.0010055009.0011655809.0014057009.0010255108.9011055509.0013456709.0010055009.0011655809.0014457208.9010255108.9011055508.9014257108.9010655308.9013856908.90149574511.50153576511.50157578511.50161580511.50165582511.50149574511.50157578511.50161580511.50151575511.50159579511.50149574511.50157578511.50165582511.50151575511.40159579511.40802.11ac(HT80)MCS0155577511.40NoCh #ModeModeBand(GHz)SAR Test (Yes/No)Freq. (MHz)Avg Pwr(dBm)YesNoMCS0MCS0NoNoMCS0YesNoNoYesNoMCS0MCS06 MbpsMCS0No802.11a802.11n (HT40)YesMCS0MCS06 MbpsMCS0802.11ac (HT40)802.11n (HT40)802.11ac(HT40)5.8802.11ac (HT80)5.5802.11ac (HT20)802.11n (HT20)802.11a802.11n (HT20)802.11ac (HT20) Report No.: 14U17673-S1C Power measurements to determine worst-case data rates Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 83 of 193 Variant 36 Mbps12.00Yes9 Mbps12.00No12 Mbps12.00No18 Mbps12.00No24 Mbps12.00No36 Mbps12.00No48 Mbps11.90No54 Mbps12.00No6 Mbps11.00Yes9 Mbps10.90No12 Mbps10.90No18 Mbps11.00No24 Mbps11.00No36 Mbps11.00No48 Mbps11.00No54 Mbps11.00No6 Mbps9.00Yes9 Mbps9.00No12 Mbps9.00No18 Mbps9.00No24 Mbps9.00No36 Mbps8.90No48 Mbps8.90No54 Mbps8.90No6 Mbps11.50Yes9 Mbps11.50No12 Mbps11.50No18 Mbps11.40No24 Mbps11.40No36 Mbps11.40No48 Mbps11.50No54 Mbps11.50No116558014957455.5 GHz802.11a5.8 GHz802.11a5.2 GHz802.11a5.3 GHz802.11a365180565280SAR test(Yes/No)Avg Pwr (dBm)BandModeCh #Freq. (MHz)Data Rate Report No.: 14U17673-S1C 8.7.2. Body Power Table Measured Results Issue Date: 8/15/2014 Note(s):

1. For each frequency band, testing at higher data rates and higher order modulations is not required when the maximum average output power for each of these configurations is < dB higher than those measured at the lowest data rate. 2. SAR evaluation for 802.11ac is required based on the highest 802.11a configuration per April 2013 TCB Workshop. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 84 of 193 Variant 336518017.5040520018.0044522018.0048524018.0036518017.6040520017.9848524017.8538519014.9646523015.9536518017.4048524017.9044522017.9048524017.9038519014.9046523015.90802.11ac(HT80)MCS042521015.03No52526016.9056528016.9060530016.9064532016.9052526016.8560530016.8364532016.8454527016.8762531015.4552526016.8060530016.8060530016.8064532016.8054527016.9062531015.40802.11ac(HT80)MCS058529014.53NoMCS0YesNoNoYesNoYesNoNoYesMCS0MCS0802.11n (HT40)5.3802.11ac (HT40)802.11n (HT20)802.11a5.2NoMCS0802.11a802.11n (HT20)802.11n (HT40)802.11ac (HT20)MCS0MCS06 Mbps802.11ac (HT20)6 MbpsMCS0MCS0802.11ac (HT40)Band(GHz)ModeData RateCh #Freq. (MHz)SAR Test (Yes/No)Avg Pwr(dBm) Report No.: 14U17673-S1C Wi-Fi (5 GHz Bands) Measured Results (continued) Issue Date: 8/15/2014 Note(s):

1. For each frequency band, testing at higher data rates and higher order modulations is not required when the maximum average output power for each of these configurations is < dB higher than those measured at the lowest data rate. 2. SAR evaluation for 802.11ac is required based on the highest 802.11a configuration per April 2013 TCB Workshop. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 85 of 193 Variant 3100550014.50104552014.50108554014.50112556014.50116558014.50120560014.50124562014.50128564014.50132566014.40136568014.40140570014.50100550014.49116558014.49140570014.48102551013.40110555014.50134567014.40100550014.50116558014.40144572014.48102551013.40110555014.46142571013.40106553012.50138569012.40149574514.90153576515.90157578517.00161580517.00165582517.00149574514.97157578516.95161580516.96151575512.90159579514.90149574514.90157578516.90165582516.90151575513.00159579514.90802.11ac(HT80)MCS0155577513.90NoCh #ModeModeBand(GHz)SAR Test (Yes/No)Freq. (MHz)Avg Pwr(dBm)YesNoMCS0MCS0NoNoMCS0YesNoNoYesNoMCS0MCS06 MbpsMCS0No802.11a802.11n (HT40)YesMCS0MCS06 MbpsMCS0802.11ac (HT40)802.11n (HT40)802.11ac(HT40)5.8802.11ac (HT80)5.5802.11ac (HT20)802.11n (HT20)802.11a802.11n (HT20)802.11ac (HT20) Report No.: 14U17673-S1C Power measurements to determine worst-case data rates Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 86 of 193 Variant 36 Mbps18.00Yes9 Mbps18.00No12 Mbps18.00No18 Mbps17.90No24 Mbps17.90No36 Mbps17.90No48 Mbps18.00No54 Mbps18.00No6 Mbps16.90Yes9 Mbps16.80No12 Mbps16.80No18 Mbps16.80No24 Mbps16.80No36 Mbps16.80No48 Mbps16.80No54 Mbps16.80No6 Mbps14.50Yes9 Mbps14.50No12 Mbps14.50No18 Mbps14.40No24 Mbps14.40No36 Mbps14.40No48 Mbps14.40No54 Mbps14.40No6 Mbps17.00Yes9 Mbps16.90No12 Mbps17.00No18 Mbps17.00No24 Mbps17.00No36 Mbps17.00No48 Mbps16.90No54 Mbps16.90No116558014957455.5 GHz802.11a5.8 GHz802.11a5.2 GHz802.11a5.3 GHz802.11a365180565280SAR test(Yes/No)Avg Pwr (dBm)BandModeCh #Freq. (MHz)Data Rate Report No.: 14U17673-S1C 8.8. Bluetooth Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 87 of 193 Avg Pwr (dBm)Variant 30240210.4339244112.0078248010.46024029.0339244110.707824808.860240210.1219244011.9539248010.30V3.0 + EDR, 8-DPSKCh #Band(GHz)ModeFreq. (MHz)V3.0 + EDR, GFSK2.4V4.0 LE, GFSK Report No.: 14U17673-S1C Issue Date: 8/15/2014 9. Dielectric Property Measurements The temperature of the tissue-equivalent medium used during measurement must also be within 18C to 25C and within 2C of the temperature when the tissue parameters are characterized. The dielectric parameters must be measured before the tissue-equivalent medium is used in a series of SAR measurements. The parameters should be re-measured after each 3 4 days of use; or earlier if the dielectric parameters can become out of tolerance; for example, when the parameters are marginal at the beginning of the measurement series. Tissue dielectric parameters were measured at the low, middle and high frequency of each operating frequency range of the test device. 9.1. Tissue Dielectric Parameters FCC KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz IEEE Std 1528-2013 Refer to Table 3 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 88 of 193 ers (S/m)ers (S/m)15052.30.7661.90.8030045.30.8758.20.9245043.50.8756.70.9483541.50.9055.20.9790041.50.9755.01.0591541.50.9855.01.06145040.51.2054.01.30161040.31.2953.81.401800 200040.01.4053.31.52245039.21.8052.71.95300038.52.4052.02.73Target Frequency (MHz)HeadBody500036.24.4549.35.07510036.14.5549.15.18520036.04.6649.05.30530035.94.7648.95.42540035.84.8648.75.53550035.64.9648.65.65560035.55.0748.55.77570035.45.1748.35.88580035.35.2748.26.00 Report No.: 14U17673-S1C Issue Date: 8/15/2014 9.2. Dielectric Property Measurements Results SAR Lab A UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 89 of 193 DateMeasuredTargetDelta (%)Limit (%)e'55.38Relative Permittivity (r):55.3855.55-0.305e"23.24Conductivity ():0.970.960.635e'55.99Relative Permittivity (r):55.9955.740.455e"23.62Conductivity ():0.920.96-4.165e'54.98Relative Permittivity (r):54.9855.39-0.745e"22.95Conductivity ():1.010.974.345e'40.55Relative Permittivity (r):40.5541.96-3.365e"21.63Conductivity ():0.900.891.005e'41.30Relative Permittivity (r):41.3042.22-2.175e"22.01Conductivity ():0.860.89-3.665e'39.99Relative Permittivity (r):39.9941.76-4.235e"21.39Conductivity ():0.940.904.855e'40.60Relative Permittivity (r):40.6041.96-3.245e"21.54Conductivity ():0.900.890.585e'41.22Relative Permittivity (r):41.2242.22-2.365e"21.84Conductivity ():0.850.89-4.405e'39.98Relative Permittivity (r):39.9841.76-4.255e"21.16Conductivity ():0.930.903.725e'53.99Relative Permittivity (r):53.9955.55-2.805e"23.21Conductivity ():0.970.960.505e'54.48Relative Permittivity (r):54.4855.74-2.265e"23.58Conductivity ():0.920.96-4.325e'53.43Relative Permittivity (r):53.4355.39-3.545e"22.80Conductivity ():1.000.973.665e'38.88Relative Permittivity (r):38.8839.01-0.345e"13.42Conductivity ():1.941.96-1.125e'39.25Relative Permittivity (r):39.2539.140.295e"13.17Conductivity ():1.831.85-1.265e'38.50Relative Permittivity (r):38.5038.88-0.995e"13.66Conductivity ():2.052.07-0.945e'52.13Relative Permittivity (r):52.1352.51-0.735e"14.52Conductivity ():2.102.16-2.855e'52.40Relative Permittivity (r):52.4052.64-0.455e"14.29Conductivity ():1.992.02-1.685e'51.83Relative Permittivity (r):51.8352.38-1.065e"14.79Conductivity ():2.222.30-3.525e'39.2900Relative Permittivity (r):39.2939.010.725e"14.0500Conductivity ():2.031.963.525e'39.6600Relative Permittivity (r):39.6639.141.345e"13.8200Conductivity ():1.921.853.625e'38.9400Relative Permittivity (r):38.9438.880.145e"14.2600Conductivity ():2.142.073.415e'50.4300Relative Permittivity (r):50.4352.51-3.965e"15.2000Conductivity ():2.202.161.695e'50.7700Relative Permittivity (r):50.7752.64-3.555e"14.9800Conductivity ():2.082.023.075e'50.1400Relative Permittivity (r):50.1452.38-4.295e"15.4000Conductivity ():2.312.300.465Freq. (MHz)Liquid Parameters6/19/2014Body 750Body 700Body 7906/19/2014Head750Head700Head7906/23/2014Head750Head700Head7906/23/2014Body 750Body 700Body 7906/24/2014Head2600Head2500Head27006/24/2014Body 2600Body 2500Body 27006/30/2014Head2600Head2500Head27006/30/2014Body 2600Body 2500Body 2700 Report No.: 14U17673-S1C SAR Lab A (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 90 of 193 DateMeasuredTargetDelta (%)Limit (%)e'39.4500Relative Permittivity (r):39.4539.011.135e"13.8000Conductivity ():2.001.961.685e'39.8200Relative Permittivity (r):39.8239.141.755e"13.6100Conductivity ():1.891.852.045e'39.2000Relative Permittivity (r):39.2038.880.815e"14.0200Conductivity ():2.102.071.675e'50.5700Relative Permittivity (r):50.5752.51-3.705e"15.0400Conductivity ():2.172.160.625e'50.9000Relative Permittivity (r):50.9052.64-3.305e"14.8800Conductivity ():2.072.022.385e'50.3300Relative Permittivity (r):50.3352.38-3.925e"15.2300Conductivity ():2.292.30-0.6557/7/2014Body 2600Body 2500Body 2700Freq. (MHz)Liquid Parameters7/7/2014Head2600Head2500Head2700 Report No.: 14U17673-S1C SAR Lab B Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 91 of 193 DateMeasuredTargetDelta (%)Limit (%)e'39.97Relative Permittivity (r):39.9739.201.965e"13.12Conductivity ():1.791.80-0.715e'40.08Relative Permittivity (r):40.0839.282.045e"13.03Conductivity ():1.751.76-0.825e'39.89Relative Permittivity (r):39.8939.171.845e"13.19Conductivity ():1.821.83-0.655e'51.40Relative Permittivity (r):51.4052.70-2.475e"14.50Conductivity ():1.981.951.305e'51.48Relative Permittivity (r):51.4852.76-2.425e"14.42Conductivity ():1.931.911.305e'51.34Relative Permittivity (r):51.3452.67-2.525e"14.57Conductivity ():2.011.991.015e'38.33Relative Permittivity (r):38.3339.20-2.225e"13.51Conductivity ():1.841.802.255e'38.46Relative Permittivity (r):38.4639.28-2.095e"13.38Conductivity ():1.791.761.855e'38.82Relative Permittivity (r):38.8239.17-0.895e"13.56Conductivity ():1.871.832.145e'51.32Relative Permittivity (r):51.3252.70-2.625e"14.64Conductivity ():1.991.952.285e'51.41Relative Permittivity (r):51.4152.76-2.565e"14.55Conductivity ():1.951.912.225e'51.35Relative Permittivity (r):51.3552.67-2.505e"14.73Conductivity ():2.031.992.115e'39.83Relative Permittivity (r):39.8339.201.615e"13.12Conductivity ():1.791.80-0.715e'39.93Relative Permittivity (r):39.9339.281.665e"13.01Conductivity ():1.741.76-0.975e'39.77Relative Permittivity (r):39.7739.171.545e"13.17Conductivity ():1.811.83-0.805e'51.05Relative Permittivity (r):51.0552.70-3.135e"14.94Conductivity ():2.041.954.375e'51.07Relative Permittivity (r):51.0752.76-3.205e"14.72Conductivity ():1.971.913.415e'51.06Relative Permittivity (r):51.0652.67-3.055e"14.93Conductivity ():2.051.993.505e'39.2700Relative Permittivity (r):39.2739.200.185e"13.0200Conductivity ():1.771.80-1.465e'39.4100Relative Permittivity (r):39.4139.280.335e"12.9100Conductivity ():1.731.76-1.735e'39.2000Relative Permittivity (r):39.2039.170.085e"13.0800Conductivity ():1.801.83-1.485e'51.7500Relative Permittivity (r):51.7552.70-1.805e"14.3500Conductivity ():1.951.950.255e'51.8400Relative Permittivity (r):51.8452.76-1.745e"14.2400Conductivity ():1.911.910.045e'51.6700Relative Permittivity (r):51.6752.67-1.905e"14.4200Conductivity ():1.981.99-0.035Freq. (MHz)Liquid Parameters6/19/2014Head2450Head2410Head24756/19/2014Body 2450Body 2410Body 24756/23/2014Head2450Head2410Head24756/23/2014Body 2450Body 2410Body 24756/26/2014Head2450Head2410Head24756/26/2014Body 2450Body 2410Body 24756/30/2014Head2450Head2410Head24756/30/2014Body 2450Body 2410Body 2475 Report No.: 14U17673-S1C SAR Lab C Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 92 of 193 DateMeasuredTargetDelta (%)Limit (%)e'38.7000Relative Permittivity (r):38.7040.00-3.255e"13.1200Conductivity ():1.391.40-0.995e'38.8800Relative Permittivity (r):38.8840.00-2.805e"13.0800Conductivity ():1.351.40-3.895e'38.6700Relative Permittivity (r):38.6740.00-3.335e"13.1500Conductivity ():1.401.40-0.255e'51.8800Relative Permittivity (r):51.8853.30-2.665e"14.8800Conductivity ():1.571.523.425e'52.0400Relative Permittivity (r):52.0453.30-2.365e"14.8800Conductivity ():1.531.520.705e'51.8600Relative Permittivity (r):51.8653.30-2.705e"14.9000Conductivity ():1.581.524.115Freq. (MHz)Liquid Parameters6/30/2014Head1900Head1850Head19106/30/2014Body 1900Body 1850Body 1910 Report No.: 14U17673-S1C SAR Lab D Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 93 of 193 DateMeasuredTargetDelta (%)Limit (%)e'43.01Relative Permittivity (r):43.0141.503.645e"20.02Conductivity ():0.930.903.285e'43.20Relative Permittivity (r):43.2041.603.845e"20.09Conductivity ():0.920.901.955e'42.81Relative Permittivity (r):42.8141.503.165e"19.97Conductivity ():0.940.923.155e'53.49Relative Permittivity (r):53.4955.20-3.105e"21.37Conductivity ():0.990.972.295e'53.69Relative Permittivity (r):53.6955.28-2.875e"21.46Conductivity ():0.980.971.035e'53.35Relative Permittivity (r):53.3555.16-3.285e"21.31Conductivity ():1.010.992.035e'42.40Relative Permittivity (r):42.4041.502.175e"19.84Conductivity ():0.920.902.355e'42.55Relative Permittivity (r):42.5541.602.285e"19.87Conductivity ():0.910.900.845e'42.26Relative Permittivity (r):42.2641.501.835e"19.83Conductivity ():0.940.922.435e'55.51Relative Permittivity (r):55.5155.200.565e"21.56Conductivity ():1.000.973.205e'55.64Relative Permittivity (r):55.6455.280.665e"21.62Conductivity ():0.990.971.795e'55.42Relative Permittivity (r):55.4255.160.485e"21.53Conductivity ():1.020.993.085e'41.75Relative Permittivity (r):41.7541.500.605e"19.93Conductivity ():0.930.902.815e'41.87Relative Permittivity (r):41.8741.600.645e"19.97Conductivity ():0.910.901.345e'41.57Relative Permittivity (r):41.5741.500.175e"19.95Conductivity ():0.940.923.055e'53.61Relative Permittivity (r):53.6155.20-2.885e"21.63Conductivity ():1.000.973.535e'53.67Relative Permittivity (r):53.6755.28-2.915e"21.68Conductivity ():0.990.972.075e'53.46Relative Permittivity (r):53.4655.16-3.085e"21.66Conductivity ():1.020.993.705e'41.2900Relative Permittivity (r):41.2941.50-0.515e"19.0300Conductivity ():0.880.90-1.835e'41.4700Relative Permittivity (r):41.4741.60-0.325e"19.0600Conductivity ():0.870.90-3.285e'41.1200Relative Permittivity (r):41.1241.50-0.925e"19.0100Conductivity ():0.900.92-1.815e'55.0600Relative Permittivity (r):55.0655.20-0.255e"21.6100Conductivity ():1.000.973.445e'55.1800Relative Permittivity (r):55.1855.28-0.185e"21.6500Conductivity ():0.990.971.935e'54.9400Relative Permittivity (r):54.9455.16-0.395e"21.5400Conductivity ():1.020.993.135e'53.3400Relative Permittivity (r):53.3455.55-3.975e"23.3100Conductivity ():0.970.960.935e'53.9300Relative Permittivity (r):53.9355.74-3.245e"23.7200Conductivity ():0.920.96-3.755e'52.9400Relative Permittivity (r):52.9455.39-4.435e"22.9400Conductivity ():1.010.974.3057/8/2014Body 750Body 700Body 790Freq. (MHz)Liquid Parameters6/19/2014Body 835Body 820Body 8506/19/2014Head835Head820Head8506/23/2014Head835Head820Head8506/23/2014Body 835Body 820Body 8506/26/2014Head835Head820Head8506/26/2014Body 835Body 820Body 8506/30/2014Head835Head820Head8506/30/2014Body 835Body 820Body 850 Report No.: 14U17673-S1C SAR Lab D (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 94 of 193 DateMeasuredTargetDelta (%)Limit (%)e'40.7800Relative Permittivity (r):40.7841.50-1.735e"19.2100Conductivity ():0.890.90-0.905e'40.9600Relative Permittivity (r):40.9641.60-1.545e"19.2500Conductivity ():0.880.90-2.315e'40.6000Relative Permittivity (r):40.6041.50-2.175e"19.1300Conductivity ():0.900.92-1.195e'55.9800Relative Permittivity (r):55.9855.201.415e"21.6900Conductivity ():1.010.973.825e'56.1100Relative Permittivity (r):56.1155.281.515e"21.7900Conductivity ():0.990.972.595e'55.8400Relative Permittivity (r):55.8455.161.245e"21.6200Conductivity ():1.020.993.5157/17/2014Body 835Body 820Body 850Freq. (MHz)Liquid Parameters7/17/2014Head835Head820Head850 Report No.: 14U17673-S1C SAR Lab E Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 95 of 193 DateMeasuredTargetDelta (%)Limit (%)e'36.2300Relative Permittivity (r):36.2336.010.605e"15.4200Conductivity ():4.444.63-4.095e'36.2300Relative Permittivity (r):36.2335.990.675e"15.4800Conductivity ():4.484.65-3.775e'35.6800Relative Permittivity (r):35.6835.530.415e"15.5500Conductivity ():4.845.06-4.315e'35.3700Relative Permittivity (r):35.3735.300.205e"15.6500Conductivity ():5.055.27-4.235e'35.3700Relative Permittivity (r):35.3735.300.205e"15.7100Conductivity ():5.095.27-3.455e'48.1700Relative Permittivity (r):48.1749.05-1.795e"17.4400Conductivity ():5.025.27-4.715e'48.1900Relative Permittivity (r):48.1949.02-1.695e"17.5300Conductivity ():5.075.29-4.275e'47.6900Relative Permittivity (r):47.6948.48-1.625e"17.7100Conductivity ():5.515.76-4.285e'47.3600Relative Permittivity (r):47.3648.20-1.745e"17.8400Conductivity ():5.756.00-4.115e'47.4000Relative Permittivity (r):47.4048.20-1.665e"17.9200Conductivity ():5.806.00-3.275e'36.1100Relative Permittivity (r):36.1136.010.275e"15.6900Conductivity ():4.524.63-2.415e'36.1700Relative Permittivity (r):36.1735.990.505e"15.8300Conductivity ():4.584.65-1.595e'35.7200Relative Permittivity (r):35.7235.530.525e"15.9400Conductivity ():4.965.06-1.915e'35.4400Relative Permittivity (r):35.4435.300.405e"15.9800Conductivity ():5.155.27-2.215e'35.4600Relative Permittivity (r):35.4635.300.455e"16.1000Conductivity ():5.215.27-1.055e'47.0200Relative Permittivity (r):47.0249.05-4.135e"18.1300Conductivity ():5.225.27-0.945e'47.1200Relative Permittivity (r):47.1249.02-3.885e"18.3200Conductivity ():5.305.290.045e'46.6700Relative Permittivity (r):46.6748.48-3.735e"18.4600Conductivity ():5.755.76-0.235e'46.3800Relative Permittivity (r):46.3848.20-3.785e"18.6000Conductivity ():6.006.00-0.035e'46.4500Relative Permittivity (r):46.4548.20-3.635e"18.7700Conductivity ():6.086.001.325e'37.0200Relative Permittivity (r):37.0236.012.805e"16.1300Conductivity ():4.654.630.335e'37.0200Relative Permittivity (r):37.0235.992.865e"16.1300Conductivity ():4.664.650.275e'36.3900Relative Permittivity (r):36.3935.532.415e"16.3400Conductivity ():5.095.060.555e'36.0700Relative Permittivity (r):36.0735.302.185e"16.4900Conductivity ():5.325.270.915e'36.0600Relative Permittivity (r):36.0635.302.155e"16.5000Conductivity ():5.345.271.41558256/26/2014Head5180Head5200Head5600Head5800HeadBody 5600Body 5800Body 58255600Head5800Head58256/23/2014Body 5180Body 5200Body 5800Body 58256/23/2014Head5180Head5200Head5800Head58256/19/2014Body 5180Body 5200Body 5600Freq. (MHz)Liquid Parameters6/19/2014Head5180Head5200Head5600Head Report No.: 14U17673-S1C SAR Lab E (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 96 of 193 DateMeasuredTargetDelta (%)Limit (%)e'47.4400Relative Permittivity (r):47.4449.05-3.285e"18.0800Conductivity ():5.215.27-1.215e'47.5800Relative Permittivity (r):47.5849.02-2.945e"18.2500Conductivity ():5.285.29-0.345e'47.1500Relative Permittivity (r):47.1548.48-2.745e"18.3800Conductivity ():5.725.76-0.665e'46.8200Relative Permittivity (r):46.8248.20-2.865e"18.5200Conductivity ():5.976.00-0.465e'46.9700Relative Permittivity (r):46.9748.20-2.555e"18.7200Conductivity ():6.066.001.055e'34.6700Relative Permittivity (r):34.6736.01-3.735e"15.7400Conductivity ():4.534.63-2.105e'34.6800Relative Permittivity (r):34.6835.99-3.645e"15.7700Conductivity ():4.564.65-1.965e'34.1700Relative Permittivity (r):34.1735.53-3.845e"15.8600Conductivity ():4.945.06-2.415e'35.0200Relative Permittivity (r):35.0235.30-0.795e"16.1000Conductivity ():5.195.27-1.485e'34.9500Relative Permittivity (r):34.9535.30-0.995e"16.1700Conductivity ():5.245.27-0.625e'48.3800Relative Permittivity (r):48.3849.05-1.365e"18.6200Conductivity ():5.365.271.745e'48.2900Relative Permittivity (r):48.2949.02-1.495e"18.6200Conductivity ():5.385.291.685e'47.6700Relative Permittivity (r):47.6748.48-1.675e"19.0100Conductivity ():5.925.762.755e'47.2600Relative Permittivity (r):47.2648.20-1.955e"19.0000Conductivity ():6.136.002.125e'47.2000Relative Permittivity (r):47.2048.20-2.075e"19.1200Conductivity ():6.196.003.215e'34.8500Relative Permittivity (r):34.8536.01-3.235e"15.6400Conductivity ():4.504.63-2.725e'34.8300Relative Permittivity (r):34.8335.99-3.225e"15.6400Conductivity ():4.524.65-2.775e'34.2300Relative Permittivity (r):34.2335.53-3.675e"15.8600Conductivity ():4.945.06-2.415e'33.9100Relative Permittivity (r):33.9135.30-3.945e"15.6800Conductivity ():5.065.27-4.055e'33.8500Relative Permittivity (r):33.8535.30-4.115e"15.8600Conductivity ():5.145.27-2.535e'48.6400Relative Permittivity (r):48.6449.05-0.835e"18.1400Conductivity ():5.225.27-0.885e'48.6400Relative Permittivity (r):48.6449.02-0.775e"18.2100Conductivity ():5.275.29-0.565e'48.0400Relative Permittivity (r):48.0448.48-0.905e"18.6300Conductivity ():5.805.760.695e'47.6200Relative Permittivity (r):47.6248.20-1.205e"18.4300Conductivity ():5.946.00-0.945e'47.6200Relative Permittivity (r):47.6248.20-1.205e"18.7200Conductivity ():6.066.001.055Body 582558257/7/2014Body 5180Body 5200Body 5600Body 58007/7/2014Head5180Head5200Head5600Head5800Head5800Body 5825Freq. (MHz)Liquid Parameters6/26/2014Body 5180Body 5200Body 5600Body 6/30/2014Head5180Head5200Head56006/30/2014Body 5180Body 5200Body 5600Body 5800Body 5825Head5800Head5825 Report No.: 14U17673-S1C SAR Lab E (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 97 of 193 DateMeasuredTargetDelta (%)Limit (%)e'37.3600Relative Permittivity (r):37.3636.013.745e"15.5300Conductivity ():4.474.63-3.405e'37.3200Relative Permittivity (r):37.3235.993.695e"15.5400Conductivity ():4.494.65-3.395e'36.7500Relative Permittivity (r):36.7535.533.425e"15.7600Conductivity ():4.915.06-3.025e'36.4900Relative Permittivity (r):36.4935.303.375e"15.9100Conductivity ():5.135.27-2.645e'36.4700Relative Permittivity (r):36.4735.303.315e"15.9100Conductivity ():5.155.27-2.225e'48.4700Relative Permittivity (r):48.4749.05-1.185e"18.6000Conductivity ():5.365.271.635e'48.4300Relative Permittivity (r):48.4349.02-1.205e"18.6000Conductivity ():5.385.291.575e'47.7300Relative Permittivity (r):47.7348.48-1.545e"18.9900Conductivity ():5.915.762.645e'47.4200Relative Permittivity (r):47.4248.20-1.625e"19.2200Conductivity ():6.206.003.315e'47.3900Relative Permittivity (r):47.3948.20-1.685e"19.2300Conductivity ():6.236.003.8157/17/2014Head5180Head5200Head5600Head7/17/2014Body 5180Body 5200Body 5600Body 5800Body Liquid Parameters5800Head5825Freq. (MHz)5825 Report No.: 14U17673-S1C SAR Lab F Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 98 of 193 DateMeasuredTargetDelta (%)Limit (%)e'36.5200Relative Permittivity (r):36.5236.011.415e"15.7100Conductivity ():4.524.63-2.285e'36.4800Relative Permittivity (r):36.4835.991.365e"15.6200Conductivity ():4.524.65-2.905e'35.8900Relative Permittivity (r):35.8935.531.005e"15.7900Conductivity ():4.925.06-2.845e'35.5700Relative Permittivity (r):35.5735.300.765e"15.9200Conductivity ():5.135.27-2.585e'35.5000Relative Permittivity (r):35.5035.300.575e"15.8800Conductivity ():5.145.27-2.405e'47.9300Relative Permittivity (r):47.9349.05-2.285e"18.6500Conductivity ():5.375.271.905e'47.8200Relative Permittivity (r):47.8249.02-2.455e"18.5300Conductivity ():5.365.291.195e'47.0900Relative Permittivity (r):47.0948.48-2.865e"18.9200Conductivity ():5.895.762.265e'46.7200Relative Permittivity (r):46.7248.20-3.075e"19.1400Conductivity ():6.176.002.885e'46.6100Relative Permittivity (r):46.6148.20-3.305e"19.1000Conductivity ():6.196.003.105e'36.1800Relative Permittivity (r):36.1836.010.465e"15.5100Conductivity ():4.474.63-3.535e'36.0200Relative Permittivity (r):36.0235.990.085e"15.4500Conductivity ():4.474.65-3.955e'35.4700Relative Permittivity (r):35.4735.53-0.185e"15.6300Conductivity ():4.875.06-3.825e'35.4600Relative Permittivity (r):35.4635.300.455e"15.6500Conductivity ():5.055.27-4.235e'35.2200Relative Permittivity (r):35.2235.30-0.235e"15.6300Conductivity ():5.065.27-3.945e'49.6800Relative Permittivity (r):49.6849.051.295e"18.7800Conductivity ():5.415.272.615e'49.4200Relative Permittivity (r):49.4249.020.825e"18.7500Conductivity ():5.425.292.395e'48.7200Relative Permittivity (r):48.7248.480.505e"19.3400Conductivity ():6.025.764.535e'48.7900Relative Permittivity (r):48.7948.201.225e"19.3400Conductivity ():6.246.003.955e'48.4400Relative Permittivity (r):48.4448.200.505e"19.3600Conductivity ():6.276.004.515e'34.9600Relative Permittivity (r):34.9636.01-2.925e"15.7100Conductivity ():4.524.63-2.285e'34.9500Relative Permittivity (r):34.9535.99-2.895e"15.7300Conductivity ():4.554.65-2.215e'34.4400Relative Permittivity (r):34.4435.53-3.085e"15.8400Conductivity ():4.935.06-2.535e'34.1000Relative Permittivity (r):34.1035.30-3.405e"15.8100Conductivity ():5.105.27-3.255e'34.1000Relative Permittivity (r):34.1035.30-3.405e"15.8900Conductivity ():5.155.27-2.34558256/30/2014Head5180Head5200Head5600Head5800HeadBody 5600Body 5800Body 58255600Head5800Head58256/26/2014Body 5180Body 5200Body 5800Body 58256/26/2014Head5180Head5200Head5800Head58256/23/2014Body 5180Body 5200Body 5600Freq. (MHz)Liquid Parameters6/23/2014Head5180Head5200Head5600Head Report No.: 14U17673-S1C SAR Lab F (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 99 of 193 DateMeasuredTargetDelta (%)Limit (%)e'47.6800Relative Permittivity (r):47.6849.05-2.795e"18.4400Conductivity ():5.315.270.755e'47.6600Relative Permittivity (r):47.6649.02-2.775e"18.4900Conductivity ():5.355.290.975e'47.0500Relative Permittivity (r):47.0548.48-2.955e"18.8900Conductivity ():5.885.762.105e'46.5800Relative Permittivity (r):46.5848.20-3.365e"18.9400Conductivity ():6.116.001.805e'46.6100Relative Permittivity (r):46.6148.20-3.305e"19.1500Conductivity ():6.206.003.375e'35.4400Relative Permittivity (r):35.4436.01-1.595e"15.8700Conductivity ():4.574.63-1.295e'35.4100Relative Permittivity (r):35.4135.99-1.615e"15.8700Conductivity ():4.594.65-1.345e'34.7900Relative Permittivity (r):34.7935.53-2.095e"16.1000Conductivity ():5.015.06-0.935e'34.4700Relative Permittivity (r):34.4735.30-2.355e"15.9300Conductivity ():5.145.27-2.525e'34.3800Relative Permittivity (r):34.3835.30-2.615e"16.1100Conductivity ():5.225.27-0.995e'47.4000Relative Permittivity (r):47.4049.05-3.365e"18.5200Conductivity ():5.335.271.195e'47.3500Relative Permittivity (r):47.3549.02-3.415e"18.5400Conductivity ():5.365.291.245e'46.6600Relative Permittivity (r):46.6648.48-3.755e"19.0000Conductivity ():5.925.762.695e'46.2100Relative Permittivity (r):46.2148.20-4.135e"18.8400Conductivity ():6.086.001.265e'46.1500Relative Permittivity (r):46.1548.20-4.255e"19.0900Conductivity ():6.186.003.055e'37.4300Relative Permittivity (r):37.4336.013.935e"15.5700Conductivity ():4.484.63-3.155e'37.4000Relative Permittivity (r):37.4035.993.925e"15.5800Conductivity ():4.504.65-3.145e'36.8200Relative Permittivity (r):36.8235.533.625e"15.8000Conductivity ():4.925.06-2.785e'36.5600Relative Permittivity (r):36.5635.303.575e"15.9300Conductivity ():5.145.27-2.525e'36.5400Relative Permittivity (r):36.5435.303.515e"15.9300Conductivity ():5.165.27-2.105e'47.6400Relative Permittivity (r):47.6449.05-2.875e"18.4300Conductivity ():5.315.270.705e'47.6000Relative Permittivity (r):47.6049.02-2.905e"18.4300Conductivity ():5.335.290.645e'46.9100Relative Permittivity (r):46.9148.48-3.235e"18.8300Conductivity ():5.865.761.775e'46.6200Relative Permittivity (r):46.6248.20-3.285e"19.0500Conductivity ():6.146.002.395e'46.5900Relative Permittivity (r):46.5948.20-3.345e"19.0500Conductivity ():6.176.002.83558257/17/2014Body 5180Body 5200Body 5600Body 5800Body Head5600Head5800Head58255825Head5800Head58257/17/2014Head5180Head52007/72014Body 5180Body 5200Body 5600Body 5800Body Body 5600Body 7/7/2014Head5180Head5200Head56005800Body 5825Freq. (MHz)Liquid Parameters6/30/2014Body 5180Body 5200 Report No.: 14U17673-S1C SAR Lab G Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 100 of 193 DateMeasuredTargetDelta (%)Limit (%)e'40.3900Relative Permittivity (r):40.3940.080.765e"13.5600Conductivity ():1.321.37-3.625e'40.5800Relative Permittivity (r):40.5840.151.085e"13.4800Conductivity ():1.281.35-4.815e'40.3800Relative Permittivity (r):40.3840.080.765e"13.5900Conductivity ():1.331.37-3.335e'52.0100Relative Permittivity (r):52.0153.44-2.685e"14.9600Conductivity ():1.461.49-2.055e'52.1700Relative Permittivity (r):52.1753.54-2.575e"14.9300Conductivity ():1.421.46-2.875e'52.0000Relative Permittivity (r):52.0053.43-2.675e"14.9800Conductivity ():1.461.49-1.845e'38.4000Relative Permittivity (r):38.4040.08-4.205e"13.6200Conductivity ():1.331.37-3.195e'38.5900Relative Permittivity (r):38.5940.15-3.885e"13.4900Conductivity ():1.281.35-4.745e'38.3900Relative Permittivity (r):38.3940.08-4.215e"13.6500Conductivity ():1.331.37-2.905e'51.8000Relative Permittivity (r):51.8053.44-3.075e"15.1500Conductivity ():1.471.49-0.815e'51.9400Relative Permittivity (r):51.9453.54-2.995e"15.0400Conductivity ():1.431.46-2.165e'51.7900Relative Permittivity (r):51.7953.43-3.075e"15.1600Conductivity ():1.481.49-0.665e'39.2300Relative Permittivity (r):39.2340.08-2.135e"13.7200Conductivity ():1.341.37-2.485e'39.3000Relative Permittivity (r):39.3040.15-2.115e"13.6600Conductivity ():1.301.35-3.545e'39.2200Relative Permittivity (r):39.2240.08-2.145e"13.7500Conductivity ():1.341.37-2.195e'52.0300Relative Permittivity (r):52.0353.44-2.645e"15.4100Conductivity ():1.501.490.905e'52.0500Relative Permittivity (r):52.0553.54-2.795e"15.3900Conductivity ():1.461.460.125e'52.0400Relative Permittivity (r):52.0453.43-2.605e"15.4400Conductivity ():1.511.491.175e'41.4600Relative Permittivity (r):41.4640.083.435e"13.7500Conductivity ():1.341.37-2.275e'41.6500Relative Permittivity (r):41.6540.153.755e"13.7100Conductivity ():1.301.35-3.185e'41.4200Relative Permittivity (r):41.4240.083.355e"13.8100Conductivity ():1.351.37-1.765e'52.0200Relative Permittivity (r):52.0253.44-2.665e"15.3100Conductivity ():1.491.490.245e'52.1700Relative Permittivity (r):52.1753.54-2.575e"15.3000Conductivity ():1.451.46-0.465e'51.9800Relative Permittivity (r):51.9853.43-2.715e"15.3400Conductivity ():1.501.490.5256/30/2014Body 1750Body 1710Body 17556/30/2014Head1750Head1710Head17556/26/2014Body 1750Body 1710Body 17556/26/2014Head1750Head1710Head17556/23/2014Body 1750Body 1710Body 17556/23/2014Head1750Head1710Head17556/19/2014Body 1750Body 1710Body 1755Freq. (MHz)Liquid Parameters6/19/2014Head1750Head1710Head1755 Report No.: 14U17673-S1C SAR Lab G (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 101 of 193 DateMeasuredTargetDelta (%)Limit (%)e'52.5100Relative Permittivity (r):52.5153.30-1.485e"14.2700Conductivity ():1.511.52-0.825e'52.6200Relative Permittivity (r):52.6253.30-1.285e"14.3100Conductivity ():1.471.52-3.165e'52.4900Relative Permittivity (r):52.4953.30-1.525e"14.2600Conductivity ():1.511.52-0.375e'51.9900Relative Permittivity (r):51.9953.30-2.465e"14.5900Conductivity ():1.541.521.415e'52.1800Relative Permittivity (r):52.1853.30-2.105e"14.6200Conductivity ():1.501.52-1.065e'51.9900Relative Permittivity (r):51.9953.30-2.465e"14.6300Conductivity ():1.551.522.225e'52.0900Relative Permittivity (r):52.0953.44-2.535e"15.3100Conductivity ():1.491.490.245e'52.3000Relative Permittivity (r):52.3053.54-2.325e"15.3900Conductivity ():1.461.460.125e'52.0500Relative Permittivity (r):52.0553.43-2.585e"15.3100Conductivity ():1.491.490.325e'51.3800Relative Permittivity (r):51.3853.30-3.605e"14.9100Conductivity ():1.581.523.635e'51.2600Relative Permittivity (r):51.2653.30-3.835e"14.9200Conductivity ():1.531.520.975e'51.2500Relative Permittivity (r):51.2553.30-3.855e"14.9100Conductivity ():1.581.524.1857/17/2014Body 1900Body 1850Body 1910Freq. (MHz)Liquid Parameters7/2/2014Body 1900Body 1850Body 19107/7/2014Body 1900Body 1850Body 19107/7/2014Body 1750Body 1710Body 1755 Report No.: 14U17673-S1C SAR Lab H Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 102 of 193 DateMeasuredTargetDelta (%)Limit (%)e'38.6500Relative Permittivity (r):38.6540.00-3.385e"13.5600Conductivity ():1.431.402.335e'38.8900Relative Permittivity (r):38.8940.00-2.785e"13.4500Conductivity ():1.381.40-1.185e'38.6200Relative Permittivity (r):38.6240.00-3.455e"13.6000Conductivity ():1.441.403.175e'51.3600Relative Permittivity (r):51.3653.30-3.645e"14.4500Conductivity ():1.531.520.435e'51.5400Relative Permittivity (r):51.5453.30-3.305e"14.3200Conductivity ():1.471.52-3.095e'51.3500Relative Permittivity (r):51.3553.30-3.665e"14.4900Conductivity ():1.541.521.245e'38.9100Relative Permittivity (r):38.9140.00-2.735e"13.4100Conductivity ():1.421.401.195e'39.0600Relative Permittivity (r):39.0640.00-2.355e"13.3500Conductivity ():1.371.40-1.915e'38.9100Relative Permittivity (r):38.9140.00-2.735e"13.4100Conductivity ():1.421.401.735e'51.3500Relative Permittivity (r):51.3553.30-3.665e"14.6400Conductivity ():1.551.521.755e'51.4800Relative Permittivity (r):51.4853.30-3.415e"14.5800Conductivity ():1.501.52-1.335e'51.3500Relative Permittivity (r):51.3553.30-3.665e"14.6500Conductivity ():1.561.522.365e'39.5000Relative Permittivity (r):39.5040.00-1.255e"13.1800Conductivity ():1.391.40-0.545e'39.7100Relative Permittivity (r):39.7140.00-0.725e"13.0500Conductivity ():1.341.40-4.115e'39.4500Relative Permittivity (r):39.4540.00-1.375e"13.2000Conductivity ():1.401.400.135e'50.9900Relative Permittivity (r):50.9953.30-4.335e"14.5800Conductivity ():1.541.521.345e'51.1800Relative Permittivity (r):51.1853.30-3.985e"14.4800Conductivity ():1.491.52-2.015e'50.9500Relative Permittivity (r):50.9553.30-4.415e"14.6200Conductivity ():1.551.522.155e'39.5600Relative Permittivity (r):39.5640.00-1.105e"13.2700Conductivity ():1.401.400.145e'39.7900Relative Permittivity (r):39.7940.00-0.535e"13.1300Conductivity ():1.351.40-3.535e'39.5200Relative Permittivity (r):39.5240.00-1.205e"13.3200Conductivity ():1.411.401.045e'51.6800Relative Permittivity (r):51.6853.30-3.045e"14.3300Conductivity ():1.511.52-0.405e'51.8800Relative Permittivity (r):51.8853.30-2.665e"14.2200Conductivity ():1.461.52-3.775e'51.6600Relative Permittivity (r):51.6653.30-3.085e"14.4000Conductivity ():1.531.520.615Freq. (MHz)Liquid Parameters6/19/2014Head1900Head1850Head19106/19/2014Body 1900Body 1850Body 19106/23/2014Head1900Head1850Head19106/23/2014Body 1900Body 1850Body 19106/26/2014Head1900Head1850Head19106/26/2014Body 1900Body 1850Body 19106/30/2014Head1900Head1850Head19106/30/2014Body 1900Body 1850Body 1910 Report No.: 14U17673-S1C SAR Lab H (continued) Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 103 of 193 DateMeasuredTargetDelta (%)Limit (%)e'40.5600Relative Permittivity (r):40.5640.001.405e"13.3500Conductivity ():1.411.400.745e'40.8600Relative Permittivity (r):40.8640.002.155e"13.2400Conductivity ():1.361.40-2.725e'40.5400Relative Permittivity (r):40.5440.001.355e"13.4200Conductivity ():1.431.401.805e'51.4400Relative Permittivity (r):51.4453.30-3.495e"14.8700Conductivity ():1.571.523.355e'51.7000Relative Permittivity (r):51.7053.30-3.005e"14.7300Conductivity ():1.521.52-0.315e'51.4400Relative Permittivity (r):51.4453.30-3.495e"14.9500Conductivity ():1.591.524.465e'40.0900Relative Permittivity (r):40.0940.000.235e"13.3300Conductivity ():1.411.400.595e'40.2900Relative Permittivity (r):40.2940.000.725e"13.2200Conductivity ():1.361.40-2.875e'40.0500Relative Permittivity (r):40.0540.000.125e"13.3500Conductivity ():1.421.401.275e'51.1900Relative Permittivity (r):51.1953.30-3.965e"14.7900Conductivity ():1.561.522.805e'51.3700Relative Permittivity (r):51.3753.30-3.625e"14.6600Conductivity ():1.511.52-0.795e'51.1500Relative Permittivity (r):51.1553.30-4.035e"14.8200Conductivity ():1.571.523.5557/17/2014Body 1900Body 1850Body 19107/17/2014Head1900Head1850Head19107/7/2014Body 1900Body 1850Body 1910Freq. (MHz)Liquid Parameters7/7/2014Head1900Head1850Head1910 Report No.: 14U17673-S1C 10. System Check & SAR Scan Procedure Issue Date: 8/15/2014 SAR system verification is required to confirm measurement accuracy, according to the tissue dielectric media, probe calibration points and other system operating parameters required for measuring the SAR of a test device. The system verification must be performed for each frequency band and within the valid range of each probe calibration point required for testing the device. The same SAR probe(s) and tissue-equivalent media combinations used with each specific SAR system for system verification must be used for device testing. When multiple probe calibration points are required to cover substantially large transmission bands, independent system verifications are required for each probe calibration point. A system verification must be performed before each series of SAR measurements using the same probe calibration point and tissue-equivalent medium. Additional system verification should be considered according to the conditions of the tissue-equivalent medium and measured tissue dielectric parameters, typically every three to four days when the liquid parameters are remeasured or sooner when marginal liquid parameters are used at the beginning of a series of measurements. 10.1. Reference Target SAR Values The reference SAR values can be obtained from the calibration certificate of system validation dipoles UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 104 of 193 1g/10gHeadBody1g8.128.7710g5.265.791g9.449.3610g6.126.201g36.637.210g19.420.01g36.737.710g19.520.31g40.140.210g21.021.31g40.940.110g21.221.21g51.650.710g24.023.71g53.050.210g24.523.41g57.456.410g25.725.01g77.773.510g22.220.51g81.879.610g23.222.11g78.373.810g22.120.41g79.375.210g22.721.01g85.380.610g24.322.31g81.075.710g22.920.9D1900V25d1639/17/20131900D2450V27065/20/20142450D750V310245/16/2014750D835V24d1429/17/2013835D1750V210504/22/20141750Target SAR Values (W/kg)System DipoleSerial No.Cal. DateFreq. (MHz)52005600D5GHzV210032/26/201458005200D5GHzV2116812/12/201356005800D1750V210538/27/20131750D2600V210363/12/20142600D1900V25d1404/23/20141900D2450V27482/18/20142450 Report No.: 14U17673-S1C 10.2. System Check Results Issue Date: 8/15/2014 The 1-g and 10-g SAR measured with a reference dipole, using the required tissue-equivalent medium at the test frequency, must be within 10% of the manufacturer calibrated dipole SAR target. SAR Lab A SAR Lab B UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 105 of 193 1g0.8650.8258.258.121.604.6210g0.5860.5405.405.262.661g0.9880.8968.968.772.179.3110g0.6650.5965.965.792.941g0.8120.7847.848.12-3.453.4510g0.5510.5145.145.26-2.281g0.8560.8488.488.77-3.310.9310g0.5790.5635.635.79-2.761g6.045.8058.057.41.053.9710g2.692.5325.325.7-1.561g6.115.9259.256.44.963.1110g2.672.5925.925.03.601g5.875.6156.157.4-2.264.4310g2.612.4624.625.7-4.281g6.085.8158.156.43.014.4410g2.642.5525.525.02.001g6.445.9659.657.43.837.4510g2.842.5925.925.70.781g6.235.9059.056.44.615.3010g2.712.5725.725.02.803,46/30/2014D2600V21036Head6/24/2014D2600V21036BodyHeadHead7/7/2014D2600V21036Body7/7/2014D2600V21036Body6/24/2014D2600V21036Head1,26/19/2014D750V310246/30/2014D2600V21036BodyHeadBodyArea ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)6/23/2014Date TestedD750V310246/23/2014D750V36/19/2014D750V310241024Delta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results 1g5.415.0750.751.6-1.746.2810g2.392.3223.224.0-3.331g5.735.3253.250.74.937.1610g2.472.4424.423.72.951g5.435.4054.053.01.890.5510g2.392.4624.624.50.411g4.984.9949.950.2-0.60-0.2010g2.152.2822.823.4-2.561g5.355.3353.353.00.570.3710g2.372.4324.324.5-0.821g5.205.3253.250.25.98-2.3110g2.272.4424.423.44.271g5.295.2252.253.0-1.511.3210g2.332.4124.124.5-1.631g5.335.4954.950.29.36-3.0010g2.292.5325.323.48.12Delta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results 6/23/2014Date TestedD2450V27066/23/2014D2450V26/19/2014D2450V2748706HeadBody5,6Area ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)Head6/19/2014D2450V27486/30/2014D2450V2706Body7,8Body6/26/2014D2450V2706Head6/26/2014D2450V2706Body6/30/2014D2450V2706Head Report No.: 14U17673-S1C SAR Lab C Issue Date: 8/15/2014 SAR Lab D UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 106 of 193 1g4.384.3043.040.95.131.8310g2.252.2222.221.24.721g4.274.2642.640.16.230.2310g2.142.2122.121.24.25Delta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results Date Tested6/30/2014D1900V25d163HeadBody9,10Area ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)6/30/2014D1900V25d1631g0.9150.8928.929.44-5.512.5110g0.6150.5845.846.12-4.581g0.9350.9179.179.36-2.031.9310g0.6260.6026.026.20-2.901g0.9110.8908.909.44-5.722.3110g0.6120.5825.826.12-4.901g0.9670.9389.389.360.213.0010g0.6470.6176.176.20-0.481g4.074.0540.540.11.000.4910g2.042.1021.021.2-0.941g0.9980.9769.769.443.392.2010g0.6690.6396.396.124.411g1.021.0110.19.367.910.9810g0.6850.6596.596.206.291g1.030.9999.999.445.833.0110g0.6920.6536.536.126.701g1.000.9539.539.361.824.7010g0.6690.6266.266.200.971g0.8820.8608.608.77-1.942.4910g0.5970.5735.735.79-1.041g0.9220.8978.979.44-4.982.7110g0.6190.5865.866.12-4.251g0.9930.9619.619.362.673.2210g0.6640.6306.306.201.616/26/2014D835V24d142Body13,146/26/2014D835V24d142HeadBody4d142Head7/17/2014D835V2Body11,127/17/2014D835V24d142Body6/30/2014D835V24d142Body7/8/2014D750V31024Body15,166/24/2014D1900V25d163Head6/19/2014D835V24d1426/30/2014D835V24d142HeadHeadBodyArea ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)6/23/2014Date TestedD835V24d1426/23/2014D835V26/19/2014D835V24d1424d142Delta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results Report No.: 14U17673-S1C SAR Lab E Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 107 of 193 1g7.438.0680.685.3-5.51-8.4810g2.092.3023.024.3-5.351g7.628.1181.180.60.62-6.4310g2.102.2722.722.31.791g7.397.9279.285.3-7.15-7.1710g2.062.2422.424.3-7.821g7.457.9279.280.6-1.74-6.3110g2.032.2122.122.3-0.901g8.268.4484.485.3-1.06-2.1810g2.322.4124.124.3-0.821g8.058.3183.180.63.10-3.2310g2.182.3323.322.34.481g8.118.5785.779.38.07-5.6710g2.262.4524.522.77.931g7.347.6676.675.21.86-4.3610g2.042.1821.821.03.811g6.668.4784.785.3-0.70-27.1810g1.892.4124.124.3-0.821g7.738.2182.180.61.86-6.2110g2.092.3023.022.33.141g7.787.5775.779.3-4.542.7010g2.222.1721.722.7-4.411g7.067.3973.975.2-1.73-4.6710g1.942.1021.021.00.001g8.038.7787.785.32.81-9.2210g2.282.5025.024.32.881g8.058.4084.080.64.22-4.3510g2.182.3523.522.35.381g7.177.9679.679.30.38-11.0210g2.062.2622.622.7-0.441g6.877.3873.875.2-1.86-7.4210g1.942.0920.921.0-0.481g7.287.9679.685.3-6.68-9.3410g2.062.2722.724.3-6.581g7.568.0980.980.60.37-7.0110g2.082.3023.022.33.141g6.877.7177.181.0-4.81-12.2310g1.932.1821.822.9-4.801g6.396.9069.075.7-8.85-7.9810g1.771.9319.320.9-7.66Delta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results 6/23/2014Date TestedD5600V211686/23/2014D5600V26/19/2014D5600V211681168HeadBodyArea ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)Head6/19/2014D5600V211686/26/2014D5200V21168BodyBody6/30/2014D5600V21168Body6/26/2014D5600V21168Head7/1/2014D5200V21168Body6/30/2014D5600V211681168Head7/7/2014D5600V27/7/2014D5600V2Head7/17/2014D5200V2HeadBody7/1/2014D5200V2116811686/26/2014D5600V21168BodyHead116811687/17/2014D5600V2Head6/26/2014D5200V21168Head11687/17/2014D5600V2Body7/17/2014D5200V2Body11687/17/2014D5800V21168Head7/17/2014D5800V21168Body17,18 Report No.: 14U17673-S1C SAR Lab F Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 108 of 193 1g7.617.9579.5077.702.32-4.4710g2.112.2922.9022.203.151g7.147.4974.9073.501.90-4.9010g1.952.1321.3020.503.901g6.757.2972.9078.30-6.90-8.0010g1.822.0520.5022.10-7.241g7.007.5475.4073.802.17-7.7110g1.912.1521.5020.405.391g6.837.4274.2078.3-5.24-8.6410g1.842.0720.7022.1-6.331g7.197.5775.7073.82.57-5.2910g1.982.1721.7020.46.371g7.207.4374.3077.7-4.38-3.1910g1.992.1421.4022.2-3.601g7.147.6076.0073.503.40-6.4410g1.962.1521.5020.504.881g6.867.7777.7077.70.00-13.2710g1.952.2522.5022.21.351g7.367.7877.8073.55.85-5.7110g2.032.2322.3020.58.781g7.367.4974.9078.3-4.34-1.7710g2.052.1621.6022.1-2.261g5.927.5075.0073.81.63-26.6910g1.652.1521.5020.45.391g6.707.3173.177.7-5.92-9.1010g1.912.1021.022.2-5.411g6.506.8968.973.5-6.26-6.0010g1.781.9619.620.5-4.391g6.727.4474.478.3-4.98-10.7110g1.882.1021.022.1-4.981g6.396.8068.073.8-7.86-6.4210g1.741.9119.120.4-6.371g7.648.3283.277.77.08-8.9010g2.122.3323.322.24.951g7.247.8478.473.56.67-8.2910g2.042.2322.320.58.781g6.428.1081.078.33.45-26.1710g1.812.2822.822.13.171g6.667.1471.473.8-3.25-7.2110g1.832.0120.120.4-1.477/17/2014D5800V21003Head7/17/2014D5800V21003Body10037/17/2014D5200V2Body7/7/2014D5800V2Body19,20100310037/17/2014D5200V2Head6/27/2014D5200V21003Head100310036/26/2014D5800V21003BodyHead1003Head7/7/2014D5800V2HeadBody6/30/2014D5800V21003Head7/7/2014D5200V27/7/2014D5200V2Head6/30/2014D5800V21003Body6/30/2014D5200V21003Body6/30/2014D5200V21003Body6/26/2014D5800V21003Head6/23/2014D5200V210036/27/2014D5200V21003BodyHeadBodyArea ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)6/23/2014Date TestedD5800V210036/23/2014D5800V26/23/2014D5200V210031003Delta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results Report No.: 14U17673-S1C SAR Lab G Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 109 of 193 1g3.793.6336.336.6-0.824.2210g2.021.9319.319.4-0.521g3.813.7137.137.2-0.272.6210g1.981.9819.820.0-1.001g3.773.4934.936.6-4.647.4310g2.011.8718.719.4-3.611g3.923.8638.637.23.761.5310g2.042.0620.620.03.001g3.723.6036.036.6-1.643.2310g1.991.9219.219.4-1.031g3.883.8238.237.22.691.5510g2.032.0420.420.02.001g3.863.7137.136.71.093.8910g2.061.9819.819.51.541g3.873.8338.337.71.591.0310g2.052.0520.520.30.991g3.963.9339.340.1-2.000.7610g1.982.0320.321.2-4.251g4.184.1241.240.12.741.4410g2.092.1321.321.20.471g4.023.9539.537.74.771.7410g2.102.1021.020.33.451g4.073.9939.940.1-0.501.9710g2.042.0520.521.2-3.307/17/2014D1900V25d163BodyDelta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results 6/23/2014Date TestedD1750V210506/23/2014D1750V26/19/2014D1750V210501050HeadBodyArea ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)Head21,226/19/2014D1750V210506/30/2014D1750V21053BodyBody7/7/2014D1900V25d163Body23,246/26/2014D1750V21050Head7/2/2014D1900V25d163Body25,267/7/2014D1750V26/26/2014D1750V21050BodyBody10536/30/2014D1750V21053Head Report No.: 14U17673-S1C SAR Lab H Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 110 of 193 1g4.003.9839.840.1-0.750.5010g2.092.0620.621.0-1.901g4.054.0140.140.2-0.250.9910g2.052.0820.821.3-2.351g4.033.9239.240.1-2.242.7310g2.092.0320.321.0-3.331g3.823.7837.840.2-5.971.0510g1.901.9619.621.3-7.981g3.863.7537.540.1-6.482.8510g1.981.9419.421.0-7.621g4.013.9639.640.2-1.491.2510g1.992.0520.521.3-3.761g4.084.0140.140.10.001.7210g2.092.0920.921.0-0.481g4.084.0940.940.21.74-0.2510g2.022.1321.321.30.001g4.234.0940.940.12.003.3110g2.182.1221.221.00.951g4.294.2542.540.25.720.9310g2.142.2222.221.34.231g3.923.9339.340.1-2.00-0.2610g2.032.0520.521.0-2.381g4.054.0240.240.20.000.7410g2.052.0920.921.3-1.887/17/2014D1900V25d140Head7/17/2014D1900V25d140BodyDelta10 %System DipoleTypeSerial #Normalize to 1 WMeasured Results 6/23/2014Date TestedD1900V25d1406/23/2014D1900V26/19/2014D1900V25d1405d140HeadBodyArea ScanZoom ScanT.S.LiquidPlot No.Est./Zoom Ratio Target(Ref. Value)Head6/19/2014D1900V25d1406/30/2014D1900V25d140BodyBody7/7/2014D1900V25d140Body6/26/2014D1900V25d140Head27,287/7/2014D1900V25d1406/26/2014D1900V25d140BodyHead6/30/2014D1900V25d140Head Report No.: 14U17673-S1C 10.3. SAR Scan Procedure Issue Date: 8/15/2014 Step 1: Power Reference Measurement The Power Reference Measurement and Power Drift Measurements are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface determines the closest measurement point to phantom surface. The minimum distance of probe sensors to surface is 2.1 mm. This distance cannot be smaller than the distance of sensor calibration points to probe tip as defined in the probe properties. Step 2: Area Scan The Area Scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in DASY software can find the maximum locations even in relatively coarse grids. When an Area Scan has measured all reachable points, it computes the field maximal found in the scanned area, within a range of the global maximum. The range (in dB) is specified in the standards for compliance testing. For example, a 2 dB range is required in IEEE Standard 1528 and IEC 62209 standards, whereby 3 dB is a requirement when compliance is assessed in accordance with the ARIB standard (Japan). If only one Zoom Scan follows the Area Scan, then only the absolute maximum will be taken as reference. For cases where multiple maximums are detected, the number of Zoom Scans has to be increased accordingly. Area Scan Parameters extracted from KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 111 of 193 Report No.: 14U17673-S1C Step 3: Zoom Scan Zoom Scans are used to assess the peak spatial SAR values within a cubic averaging volume containing 1 g and 10 g of simulated tissue. The Zoom Scan measures points (refer to table below) within a cube whose base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the Zoom Scan evaluates the averaged SAR for 1 g and 10 g and displays these values next to the jobs label. Issue Date: 8/15/2014 Zoom Scan Parameters extracted from KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz Step 4: Power drift measurement The Power Drift Measurement measures the field at the same location as the most recent power reference measurement within the same procedure, and with the same settings. The Power Drift Measurement gives the field difference in dB from the reading conducted within the last Power Reference Measurement. This allows a user to monitor the power drift of the device under test within a batch process. The measurement procedure is the same as Step 1. Step 5: Z-Scan (FCC only) The Z Scan measures points along a vertical straight line. The line runs along the Z-axis of a one-dimensional grid. In order to get a reasonable extrapolation the extrapolated distance should not be larger than the step size in Z-

direction. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 112 of 193 Report No.: 14U17673-S1C 11. Measured and Reported (Scaled) SAR Results Issue Date: 8/15/2014 0.8 W/kg or 2.0 W/kg, for 1-g or 10-g respectively, when the transmission band is 100 MHz 0.6 W/kg or 1.5 W/kg, for 1-g or 10-g respectively, when the transmission band is between 100 MHz and 200 MHz 0.4 W/kg or 1.0 W/kg, for 1-g or 10-g respectively, when the transmission band is 200 MHz SAR Test Reduction criteria are as follows:

KDB 447498 D01 General RF Exposure Guidance:

Testing of other required channels within the operating mode of a frequency band is not required when the reported 1-g or 10-g SAR for the mid-band or highest output power channel is:

KDB 648474 D04 Handset SAR:

With headset attached, when the reported SAR for body-worn accessory, measured without a headset connected to the handset, is > 1.2 W/kg, the highest reported SAR configuration for that wireless mode and frequency band should be repeated for that body-worn accessory with a headset attached to the handset. KDB 941225 D01 SAR test for 3G devices:

Body SAR is also measured for HSPA when the maximum average output of each RF channel with HSPA active is at least dB higher than that measured without HSPA using 12.2 kbps RMC or the maximum SAR for 12.2 kbps RMC is above 75% of the SAR limit. Body SAR for HSPA is measured with E-DCH Sub-test 5, using H-Set 1 and QPSK for FRC and a 12.2 kbps RMC configured in Test Loop Mode 1 with power control algorithm 2. KDB 941225 D05 SAR for LTE Devices:

SAR test reduction is applied using the following criteria:

Start with the largest channel bandwidth and measure SAR for QPSK with 1 RB, and 50% RB allocation, using the RB offset and required test channel combination with the highest maximum output power among RB offsets at the upper edge, middle and lower edge of each required test channel. When the reported SAR is > 0.8 W/kg, testing for other Channels is performed at the highest output power level for 1RB, and 50% RB configuration for that channel. Testing for 100% RB configuration is performed at the highest output power level for 100% RB configuration across the Low, Mid and High Channel when the highest reported SAR for 1 RB and 50% RB are > 0.8 W/kg. Testing for the remaining required channels is not needed because the reported SAR for 100% RB Allocation < 1.45 W/kg. Testing for 16-QAM modulation is not required because the reported SAR for QPSK is < 1.45 W/Kg and its output power is not more than 0.5 dB higher than that of QPSK. Testing for the other channel bandwidths is not required because the reported SAR for the highest channel bandwidth is <

1.45 W/Kg and its output power is not more than 0.5 dB higher than that of the highest channel bandwidth. April 2013 TCB Workshop Updates:

Apply usual 802.11 test exclusion considerations, but include 802.11ac SAR for highest 802.11a configuration in each frequency band and each exposure condition. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 113 of 193 Report No.: 14U17673-S1C Measured SAR Results for Model A1586 11.1. GSM850 11.1.1. Head Issue Date: 8/15/2014 11.1.2. Body-worn Accessory 11.1.3. Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 114 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch190836.633.233.20.4360.4360.2870.287Left Tilt190836.633.233.20.3300.3300.1930.193Right Touch190836.633.233.20.4850.4850.2980.298Right Tilt190836.633.233.20.2980.2980.1660.166128824.232.232.20.6710.6710.4460.446190836.632.232.20.8030.8030.5320.5321251848.832.232.20.7770.7770.5130.513Left Tilt190836.632.232.20.5140.5140.3010.301Right Touch190836.632.232.20.7590.7590.4650.465Right Tilt190836.632.232.20.4720.4720.2640.264Left Touch190836.633.533.00.2440.2740.1860.209Left Tilt190836.633.533.00.0960.1080.0740.083Right Touch190836.633.533.00.2030.2280.1520.171Right Tilt190836.633.533.00.1240.1390.0920.104Left Touch190836.632.531.80.3310.3890.2540.298Left Tilt190836.632.531.80.2560.3010.1970.231Right Touch190836.632.531.80.2820.3310.2170.255Right Tilt190836.632.531.80.1900.2230.1420.167ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)0000Plot No.Dist.(mm)1-g SAR (W/kg)Left TouchVoiceGPRS 2 slotsVoiceGPRS 2 slotsUATLATTune-up limitMeas.Meas.ScaledMeas.ScaledRear190836.633.233.20.2430.2430.1500.150Front190836.633.233.20.2470.2470.1620.162Rear190836.633.533.00.3330.3740.2170.2432Front190836.633.533.00.3330.3740.1990.223UATLATVoiceVoice55Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Tune-up limitMeas.Meas.ScaledMeas.ScaledRear190836.632.232.20.3790.3790.2340.234Front190836.632.232.20.3740.3740.2450.245Edge 1190836.632.232.20.1980.1980.0890.089Edge 2190836.632.232.20.3370.3370.2200.220Edge 4190836.632.232.20.2130.2130.1360.136Rear190836.632.531.80.4450.5230.2900.341Front190836.632.531.80.4390.5160.2590.304Edge 2190836.632.531.80.3420.4020.2240.263Edge 3190836.632.531.80.2500.2940.1180.139Edge 4190836.632.531.80.4670.5490.3090.3633GPRS 2 slotsUATLATGPRS 2 slots55Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm) Report No.: 14U17673-S1C 11.2. GSM1900 11.2.1. Head Issue Date: 8/15/2014 11.2.2. Body-worn Accessory UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 115 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch6611880.029.929.90.2910.2910.1570.157Left Tilt6611880.029.929.90.2590.2590.1290.1296611880.029.929.90.7600.7600.4120.412Right Tilt6611880.029.929.90.6500.6500.3120.312Left Touch6611880.027.127.10.2690.2690.1410.141Left Tilt6611880.027.127.10.2610.2610.1290.1296611880.027.127.10.7250.7250.3990.399Right Tilt6611880.027.127.10.6410.6410.3090.309Left Touch6611880.027.427.40.3080.3080.1570.157Left Tilt6611880.027.427.40.3420.3420.1780.1785121850.227.427.40.8400.8400.4340.4346611880.027.427.40.8850.8850.4550.4558101909.827.427.40.9070.9070.4710.4714Right Tilt6611880.027.427.40.7230.7230.3710.371Left Touch6611880.030.029.70.1920.2060.1250.134Left Tilt6611880.030.029.70.1910.2050.1100.118Right Touch6611880.030.029.70.3930.4210.2420.259Right Tilt6611880.030.029.70.1900.2040.1160.124Left Touch6611880.029.529.40.3610.3690.2370.243Left Tilt6611880.029.529.40.3750.3840.2190.2246611880.029.529.40.7450.7620.4580.469Right Tilt6611880.029.529.40.3470.3550.2120.217Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)LAT0Right Touch0Right TouchRight TouchRight TouchAntennaVoice0GPRS 2 slots0GPRS 2 slots0UATVoiceEGPRS 2 slotsTune-up limitMeas.Meas.ScaledMeas.ScaledRear6611880.029.929.90.5300.5300.2560.256Front6611880.029.929.90.5660.5660.2760.2765121850.228.828.70.7980.8170.3900.3996611880.028.828.70.8500.8700.4100.4208101909.828.828.71.0201.0440.4940.50655121850.228.828.70.7760.7940.3650.3746611880.028.828.70.8410.8610.3930.4028101909.828.828.70.9871.0100.4610.472Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)RearFrontUATLATVoiceVoice55 Report No.: 14U17673-S1C 11.2.3. Hotspot Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 116 of 193 Tune-up limitMeas.Meas.ScaledMeas.Scaled5121850.228.928.90.8250.8250.4020.4026611880.028.928.90.8830.8830.4310.4318101909.828.928.80.8040.8230.3960.4055121850.228.928.90.8080.8080.3920.3926611880.028.928.90.8240.8240.3970.3978101909.828.928.80.8890.9100.4350.4455121850.228.928.90.7930.7930.3610.3616611880.028.928.90.8480.8480.3890.3898101909.828.928.80.8930.9140.4070.4165121850.228.928.90.9180.9180.5150.5156611880.028.928.90.9800.9800.5480.5488101909.828.928.80.8970.9180.5040.516Edge 46611880.028.928.90.2500.2500.1360.1365121850.225.825.60.8900.9320.4360.4576611880.025.825.61.0301.0790.5010.5258101909.825.825.81.0001.0000.4970.4975121850.225.825.60.7180.7520.3490.3656611880.025.825.60.8360.8750.4000.4198101909.825.825.81.0001.0000.4770.477Edge 26611880.025.825.60.4830.5060.2680.2815121850.225.825.60.6390.6690.2990.3136611880.025.825.60.8810.9230.4110.4308101909.825.825.80.8780.8780.3950.395Edge 46611880.025.825.60.1750.1830.0950.1005121850.226.826.80.9150.9150.4350.4356611880.026.826.80.9900.9900.4720.4728101909.826.826.81.1601.1600.5690.56965121850.226.826.80.7240.7240.3430.3436611880.026.826.80.8750.8750.4120.4128101909.826.826.81.1201.1200.5310.531Edge 26611880.026.826.80.5250.5250.2940.2945121850.226.826.80.9150.9150.4340.4346611880.026.826.81.0601.0600.4950.4958101909.826.826.81.0901.0900.5090.509Edge 46611880.026.826.80.1490.1490.0820.082EGPRS 2 slots5RearFrontEdge 3LATGPRS 2 slots5FrontEdge 3Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionUATGPRS 2 slots5FrontEdge 1AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)RearEdge 2Rear Report No.: 14U17673-S1C 11.3. W-CDMA Band V 11.3.1. Head Issue Date: 8/15/2014 11.3.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 117 of 193 Tune-up limitMeas.Meas.ScaledMeas.Scaled4132826.424.724.00.6850.8050.4490.5284183836.624.724.00.7630.8960.5090.5984233846.624.724.00.7660.9000.4960.5837Left Tilt4183836.624.724.00.5530.6500.3190.3754132826.424.724.00.7300.8580.4930.5794183836.624.724.00.7390.8680.4610.5424233846.624.724.00.7550.8870.4680.550Right Tilt4183836.624.724.00.4630.5440.2690.316Left Touch4183836.625.025.00.4080.4080.3090.309Left Tilt4183836.625.025.00.2250.2250.1740.174Right Touch4183836.625.025.00.3360.3360.2610.261Right Tilt4183836.625.025.00.2180.2180.1700.170LATRel. 99 RMC0Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)UATRel. 99 RMC0Left TouchRight TouchTune-up limitMeas.Meas.ScaledMeas.ScaledRear4183836.624.724.00.3930.4620.2540.298Front4183836.624.724.00.4320.5080.2780.327Rear4183836.625.025.00.4910.4910.3290.329Front4183836.625.025.00.5180.5180.3190.3198UATLATRel. 99 RMCRel. 99 RMC55Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Tune-up limitMeas.Meas.ScaledMeas.ScaledEdge 14183836.624.724.00.2100.2470.0950.112Edge 24183836.624.724.00.2800.3290.1820.214Edge 44183836.624.724.00.4990.5860.3260.383Edge 24183836.625.025.00.4190.4190.2710.271Edge 34183836.625.025.00.3170.3170.1520.1524132826.425.025.00.7160.7160.4700.4704183836.625.025.00.8590.8590.5640.56494233846.625.025.00.8210.8210.5330.533Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Edge 4UATLATRel. 99 RMCRel. 99 RMC55 Report No.: 14U17673-S1C 11.4. W-CDMA Band IV 11.4.1. Head Issue Date: 8/15/2014 11.4.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 118 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch14131732.619.919.80.2770.2830.1480.151Left Tilt14131732.619.919.80.3070.3140.1670.171Right Touch14131732.619.919.80.7370.7540.3850.394Right Tilt14131732.619.919.80.5850.5990.2920.299Left Touch14131732.625.025.00.3100.3100.2140.214Left Tilt14131732.625.025.00.2770.2770.1780.178Right Touch14131732.625.025.00.7550.7550.4850.48510Right Tilt14131732.625.025.00.2970.2970.1910.191Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)UATLATRel. 99 RMCRel. 99 RMC00Tune-up limitMeas.Meas.ScaledMeas.Scaled13121712.423.123.10.8720.8720.4330.43314131732.623.123.10.8380.8380.4140.41415131752.623.123.00.8150.8340.4030.41213121712.423.123.10.9770.9770.4720.4721114131732.623.123.10.8950.8950.4280.42815131752.623.123.00.8460.8660.4090.419Rear14131732.619.019.00.7320.7320.3680.36813121712.419.019.00.7010.7010.3620.36214131732.619.019.00.7980.7980.4020.40215131752.619.019.00.8510.8510.4190.419RearFrontUATLATRel. 99 RMCRel. 99 RMC55FrontPlot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Tune-up limitMeas.Meas.ScaledMeas.Scaled13121712.423.123.10.9990.9990.4630.4631214131732.623.123.10.9290.9290.4300.43015131752.623.123.00.8580.8780.3950.404Edge 214131732.623.123.10.0150.0150.0090.009Edge 414131732.623.123.10.6060.6060.3350.335Edge 214131732.619.019.00.4210.4210.2340.234Edge 314131732.619.019.00.7440.7440.3650.365Edge 414131732.619.019.00.0410.0410.0230.023LATRel. 99 RMCRel. 99 RMC55Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionUATAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Edge 1 Report No.: 14U17673-S1C 11.5. W-CDMA Band II 11.5.1. Head Issue Date: 8/15/2014 11.5.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 119 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch94001880.020.120.10.4040.4040.2090.209Left Tilt94001880.020.120.10.3530.3530.1810.18192621852.420.119.90.8480.8880.4360.45794001880.020.120.10.9780.9780.5080.50895381907.620.120.00.9380.9600.4920.503Right Tilt94001880.020.120.10.7670.7670.3740.374Left Touch94001880.024.2524.250.5490.5490.3610.361Left Tilt94001880.024.2524.250.5370.5370.3120.31292621852.424.2524.251.1701.1700.7120.71294001880.024.2524.251.1801.1800.7130.7131395381907.624.2524.251.1001.1000.6640.664Right Tilt94001880.024.2524.250.4400.4400.2820.282LATRel. 99 RMC0Right Touch94001880.024.2524.251.1401.1400.7160.716Right TouchRight TouchRel. 99 RMC0Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionUATSAR Measurement VariabilityAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)LATRel. 99 RMC0Tune-up limitMeas.Meas.ScaledMeas.Scaled92621852.423.323.30.7940.7940.3860.38694001880.023.323.30.9240.9240.4450.44595381907.623.323.30.9580.9580.4760.47692621852.423.323.30.7580.7580.3630.36394001880.023.323.30.8760.8760.4220.42295381907.623.323.30.9590.9590.4620.46292621852.418.518.50.9570.9570.4670.46794001880.018.518.50.9880.9880.4780.47895381907.618.518.51.0201.0200.4910.4911492621852.418.518.50.9290.9290.4360.43694001880.018.518.50.9670.9670.4530.45395381907.618.518.50.9880.9880.4620.462Rel. 99 RMC5FrontLATRel. 99 RMC5RearFrontRearUATPlot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Tune-up limitMeas.Meas.ScaledMeas.Scaled92621852.423.323.30.8170.8170.3640.36494001880.023.323.30.9060.9060.3970.39795381907.623.323.30.9550.9550.4090.40915Edge 294001880.023.323.30.0860.0860.0460.046Edge 494001880.023.323.30.5960.5960.3300.330Edge 294001880.018.518.50.5010.5010.2760.27692621852.418.518.50.8780.8780.4050.40594001880.018.518.50.9250.9250.4200.42095381907.618.518.50.9530.9530.4230.423Edge 494001880.018.518.50.1080.1080.0580.058Edge 1LATRel. 99 RMC5Edge 3UATRel. 99 RMC5Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm) Report No.: 14U17673-S1C 11.6. CDMA BC0 11.6.1. Head Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 120 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch384836.524.724.70.6630.6630.4330.433Left Tilt384836.524.724.70.4830.4830.2770.277Right Touch384836.524.724.70.5100.5100.3240.324Right Tilt384836.524.724.70.3010.3010.1810.181Left Touch384836.524.724.50.6490.6800.4300.45016Left Tilt384836.524.724.50.3260.3410.2030.213Right Touch384836.524.724.50.4420.4630.2790.292Right Tilt384836.524.724.50.2440.2550.1510.158Left Touch384836.525.025.00.3740.3740.2890.289Left Tilt384836.525.025.00.1980.1980.1520.152Right Touch384836.525.025.00.3180.3180.2470.247Right Tilt384836.525.025.00.1880.1880.1470.147Left Touch384836.525.024.80.3490.3650.2750.288Left Tilt384836.525.024.80.1920.2010.1480.155Right Touch384836.525.024.80.3040.3180.2430.254Right Tilt384836.525.024.80.1850.1940.1450.152Power (dBm)1xRTT(RC3 SO55)0UAT1xRTT(RC3 SO55)001xEVDO(Rel. 0)AntennaFreq. (MHz)1xEVDO(Rel. 0)0LATPlot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position10-g SAR (W/kg) Ch #.Meas.ScaledMeas.ScaledLeft Touch384+425836.52+837.7521.421.10.3330.3570.2170.233Left Tilt384+425836.52+837.7521.421.10.2400.2570.1370.147Right Touch384+425836.52+837.7521.421.10.2820.3020.1740.186Right Tilt384+425836.52+837.7521.421.10.1630.1750.0940.101Left Touch384+425836.52+837.7521.721.70.1250.1250.0960.096Left Tilt384+425836.52+837.7521.721.70.0670.0670.0510.051Right Touch384+425836.52+837.7521.721.70.1060.1060.0820.082Right Tilt384+425836.52+837.7521.721.70.0600.0600.0460.046Left Touch384+425+466836.52+837.75+838.9821.421.10.3270.3500.2140.229Left Tilt384+425+466836.52+837.75+838.9821.421.10.2370.2540.1350.145Right Touch384+425+466836.52+837.75+838.9821.421.10.2800.3000.1780.191Right Tilt384+425+466836.52+837.75+838.9821.421.10.1580.1690.0900.096Left Touch384+425+466836.52+837.75+838.9821.721.60.1240.1270.0950.097Left Tilt384+425+466836.52+837.75+838.9821.721.60.0610.0620.0470.048Right Touch384+425+466836.52+837.75+838.9821.721.60.1050.1070.0810.083Right Tilt384+425+466836.52+837.75+838.9821.721.60.0600.0610.0460.0471xEVDO(Rev. B)Three Carrier Mini.UATLATUATLAT0AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Tune-up Limit00Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position1xEVDO(Rev. B)Two Carrier Mini.Meas. Pwr (dBm)0 Report No.: 14U17673-S1C 11.6.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Issue Date: 8/15/2014 Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 121 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledRear384836.524.724.70.3890.3890.2390.239Front384836.524.724.70.3940.3940.2380.238Rear384836.524.724.50.3540.3710.2330.244Front384836.524.724.50.3460.3620.2090.219Rear384836.525.024.90.5170.5290.3410.349Front384836.525.024.90.5210.5330.4030.41217Rear384836.525.024.80.4720.4940.3170.332Front384836.525.024.80.4990.5230.3860.40451xEVDO(Rel. 0)5LAT1xRTT(RC3 SO32)51xEVDO(Rel. 0)5UAT1xRTT(RC3 SO32)AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionTune-up limitMeas.Meas.ScaledMeas.ScaledEdge 1384836.524.724.70.2190.2190.0990.099Edge 2384836.524.724.70.3850.3850.2540.254Edge 4384836.524.724.70.2360.2360.1540.154Edge 1384836.524.724.50.1640.1720.0760.080Edge 2384836.524.724.50.3250.3400.2160.226Edge 4384836.524.724.50.2230.2340.1450.152Edge 2384836.525.025.00.4390.4390.2820.282Edge 3384836.525.025.00.3180.3180.1510.1511013824.725.025.00.7150.7150.4600.460384836.525.025.00.7960.7960.5200.520777848.325.024.70.8770.9400.5710.61218Edge 2384836.525.024.80.4080.4270.2650.277Edge 3384836.525.024.80.2550.2670.1250.131Edge 4384836.525.024.80.7370.7720.4870.510LAT1xRTT(RC3 SO32)5Edge 4777848.325.024.70.8650.9270.5480.587AntennaUAT10-g SAR (W/kg) Ch #.Power (dBm)1xEVDO(Rel. 0)5LAT1xEVDO(Rel. 0)551xRTT(RC3 SO32)SAR Measurement VariabilityPlot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position1xRTT(RC3 SO32)5Edge 4Freq. (MHz) Report No.: 14U17673-S1C Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 122 of 193 Meas.ScaledMeas.ScaledRear384+425836.52+837.7521.421.10.1550.1660.0960.103Front384+425836.52+837.7521.421.10.1600.1710.0980.105Edge 1384+425836.52+837.7521.421.10.0910.0980.0400.043Edge 2384+425836.52+837.7521.421.10.1640.1760.1080.116Edge 4384+425836.52+837.7521.421.10.1340.1440.0860.092Rear384+425836.52+837.7521.721.70.1840.1840.1210.121Front384+425836.52+837.7521.721.70.1960.1960.1190.119Edge 2384+425836.52+837.7521.721.70.1470.1470.0940.094Edge 3384+425836.52+837.7521.721.70.1280.1280.0590.059Edge 4384+425836.52+837.7521.721.70.2320.2320.1520.152Rear384+425+466836.52+837.75+838.9821.421.10.1540.1650.1000.107Front384+425+466836.52+837.75+838.9821.421.10.1580.1690.0970.104Edge 1384+425+466836.52+837.75+838.9821.421.10.0870.0930.0390.042Edge 2384+425+466836.52+837.75+838.9821.421.10.1620.1740.1060.114Edge 4384+425+466836.52+837.75+838.9821.421.10.1310.1400.0840.090Rear384+425+466836.52+837.75+838.9821.721.60.1720.1760.1140.117Front384+425+466836.52+837.75+838.9821.721.60.1610.1650.1000.102Edge 2384+425+466836.52+837.75+838.9821.721.60.1350.1380.0870.089Edge 3384+425+466836.52+837.75+838.9821.721.60.1090.1120.0520.053Edge 4384+425+466836.52+837.75+838.9821.721.60.2210.2260.1450.148AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Tune-up Limit1xEVDO(Rev. B)Three Carrier Mini.Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position1xEVDO(Rev. B)Two Carrier Mini.Meas. Pwr (dBm)UATLATUATLAT5555 Report No.: 14U17673-S1C 11.7. CDMA BC1 11.7.1. Head Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 123 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch6001880.020.120.00.3020.3090.1560.160Left Tilt6001880.020.120.00.2870.2940.1430.146251851.320.120.10.8280.8280.4350.4356001880.020.120.00.9470.9690.5180.53011751908.820.120.10.9800.9800.5390.539Right Tilt6001880.020.120.00.7340.7510.3560.364Left Touch6001880.020.120.00.3250.3330.1710.175Left Tilt6001880.020.120.00.2920.2990.1450.148251851.320.120.10.8170.8170.4310.4316001880.020.120.00.8500.8700.4520.46311751908.820.120.00.8930.9140.4770.488Right Tilt6001880.020.120.00.7320.7490.3380.346Left Touch6001880.024.2524.200.5360.5420.3510.355Left Tilt6001880.024.2524.200.5240.5300.3110.315251851.324.2524.100.8680.8990.5420.5616001880.024.2524.200.9790.9900.6060.61311751908.824.2524.201.0301.0420.6370.644Right Tilt6001880.024.2524.200.3630.3670.2350.238Left Touch6001880.024.2524.250.5530.5530.3590.359Left Tilt6001880.024.2524.250.5160.5160.3050.305251851.324.2524.250.9570.9570.6050.6056001880.024.2524.251.1201.1200.7060.70611751908.824.2524.251.1801.1800.7370.73719Right Tilt6001880.024.2524.250.5320.5320.3430.343Power (dBm)AntennaFreq. (MHz)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position10-g SAR (W/kg) Ch #.UAT1xRTT(RC3 SO55)0Right Touch1xEVDO(Rel. 0)0Right TouchLAT1xRTT(RC3 SO55)0Right Touch1xEVDO(Rel. 0)0Right Touch Report No.: 14U17673-S1C 11.7.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Issue Date: 8/15/2014 Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 124 of 193 Tune-up limitMeas.Meas.ScaledMeas.Scaled251851.323.323.20.8130.8320.3950.4046001880.023.323.10.9060.9490.4350.45611751908.823.323.10.8860.9280.4260.446251851.323.323.20.7570.7750.3630.3716001880.023.323.10.8410.8810.4030.42211751908.823.323.10.9480.9930.4520.47320251851.323.323.20.7780.7960.3890.3986001880.023.323.20.8620.8820.4260.43611751908.823.323.20.8290.8480.4140.424251851.323.323.20.8100.8290.3900.3996001880.023.323.20.9530.9750.4560.46711751908.823.323.20.9690.9920.4620.473251851.318.518.50.9410.9410.4560.4566001880.018.518.50.9320.9320.4480.44811751908.818.518.50.9770.9770.4670.467Front6001880.018.518.50.7120.7120.3370.337251851.318.518.50.9210.9210.4500.4506001880.018.518.50.9490.9490.4640.46411751908.818.518.50.9840.9840.4810.481Front6001880.018.518.50.6500.6500.3140.314LAT1xEVDO(Rel. 0)5RearRear51xRTT(RC3 SO32)AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)UAT1xRTT(RC3 SO32)5Front1xEVDO(Rel. 0)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position5RearRearFrontTune-up limitMeas.Meas.ScaledMeas.Scaled251851.323.323.20.8840.9050.4130.4236001880.023.323.10.8980.9400.3980.41711751908.823.323.10.8040.8420.3660.383Edge 26001880.023.323.10.0890.0930.0480.050Edge 46001880.023.323.10.6250.6540.3450.361251851.323.323.20.8600.8800.3830.3926001880.023.323.20.9530.9750.4230.43311751908.823.323.20.8890.9100.3950.404Edge 26001880.023.323.20.0860.0880.0460.047Edge 46001880.023.323.20.6050.6190.3330.341Edge 26001880.018.518.50.4670.4670.2570.257Edge 36001880.018.518.50.7710.7710.3580.358Edge 46001880.018.518.50.1080.1080.0580.058Edge 26001880.018.518.50.4370.4370.2420.242Edge 36001880.018.518.50.7740.7740.3570.357Edge 46001880.018.518.50.1100.1100.0600.060LAT1xRTT(RC3 SO32)51xEVDO(Rel. 0)5UAT1xRTT(RC3 SO32)5Edge 11xEVDO(Rel. 0)5Edge 1Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm) Report No.: 14U17673-S1C 11.8. CDMA BC10 11.8.1. Head Issue Date: 8/15/2014 11.8.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 125 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch580820.524.724.60.6170.6310.4100.42021Left Tilt580820.524.724.60.5070.5190.2840.291Right Touch580820.524.724.60.5570.5700.3590.367Right Tilt580820.524.724.60.3870.3960.2260.231Left Touch580820.524.724.50.6160.6450.4090.428Left Tilt580820.524.724.50.4720.4940.2600.272Right Touch580820.524.724.50.5560.5820.3540.371Right Tilt580820.524.724.50.3650.3820.2130.223Left Touch580820.525.025.00.3950.3950.3020.302Left Tilt580820.525.025.00.1820.1820.1420.142Right Touch580820.525.025.00.3300.3300.2440.244Right Tilt580820.525.025.00.1930.1930.1500.150Left Touch580820.525.025.00.3920.3920.2990.299Left Tilt580820.525.025.00.1750.1750.1360.136Right Touch580820.525.025.00.3110.3110.2300.230Right Tilt580820.525.025.00.1830.1830.1420.142AntennaFreq. (MHz)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position10-g SAR (W/kg) Ch #.Power (dBm)UAT1xRTT(RC3 SO55)01xEVDO(Rel. 0)0LAT1xRTT(RC3 SO55)01xEVDO(Rel. 0)0Tune-up limitMeas.Meas.ScaledMeas.ScaledRear580820.524.724.60.3160.3230.1980.203Front580820.524.724.60.3370.3450.2680.274Rear580820.524.724.60.3130.3200.1960.201Front580820.524.724.60.2950.3020.2000.205Rear580820.525.025.00.5470.5470.3660.366Front580820.525.025.00.6160.6160.3630.36322Rear580820.525.025.00.5450.5450.3610.361Front580820.525.025.00.5850.5850.3470.347AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionUAT1xRTT(RC3 SO32)51xEVDO(Rel. 0)5LAT1xRTT(RC3 SO32)51xEVDO(Rel. 0)5Tune-up limitMeas.Meas.ScaledMeas.ScaledEdge 1580820.524.724.60.1360.1390.0630.064Edge 2580820.524.724.60.5080.5200.3350.343Edge 4580820.524.724.60.1700.1740.1110.114Edge 1580820.524.724.60.1360.1390.0630.064Edge 2580820.524.724.60.4950.5070.3280.336Edge 4580820.524.724.60.1360.1390.0910.093Edge 2580820.525.025.00.3080.3080.2040.204Edge 3580820.525.025.00.3740.3740.1780.178Edge 4580820.525.025.00.6570.6570.4370.43723Edge 2580820.525.025.00.3060.3060.2000.200Edge 3580820.525.025.00.3430.3430.1660.166Edge 4580820.525.025.00.6560.6560.4370.437Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position1xRTT(RC3 SO32)Freq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)1xEVDO(Rel. 0)55LAT1xRTT(RC3 SO32)51xEVDO(Rel. 0)5AntennaUAT Report No.: 14U17673-S1C 11.9. CDMA BC15 11.9.1. Head Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 126 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch4501732.519.919.90.3500.3500.1910.191Left Tilt4501732.519.919.90.3930.3930.2140.214251711.319.919.90.8840.8840.4600.4604501732.519.919.90.8450.8450.4380.4388751753.819.919.90.8090.8090.4200.420Right Tilt4501732.519.919.90.5960.5960.2990.299Left Touch4501732.519.919.90.3460.3460.1890.189Left Tilt4501732.519.919.90.3830.3830.2070.207251711.319.919.90.8750.8750.4550.4554501732.519.919.90.8420.8420.4370.4378751753.819.919.90.7990.7990.4150.415Right Tilt4501732.519.919.90.5920.5920.2960.296Left Touch4501732.525.025.00.3190.3190.2200.220Left Tilt4501732.525.025.00.3210.3210.2040.204Right Touch4501732.525.025.00.7650.7650.4900.490Right Tilt4501732.525.025.00.3660.3660.2260.226Left Touch4501732.525.024.70.3180.3410.2200.236Left Tilt4501732.525.024.70.3200.3430.2040.219251711.325.024.90.6180.6320.4000.4094501732.525.024.70.7480.8010.4810.5158751753.825.024.80.8880.9300.5690.59624Right Tilt4501732.525.024.70.3470.3720.2200.236LAT1xRTT(RC3 SO55)01xEVDO(Rel. 0)0Right TouchUAT1xRTT(RC3 SO55)0Right Touch1xEVDO(Rel. 0)0Right TouchPower (dBm)AntennaFreq. (MHz)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest Position10-g SAR (W/kg) Ch #. Report No.: 14U17673-S1C 11.9.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Issue Date: 8/15/2014 Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 127 of 193 Tune-up limitMeas.Meas.ScaledMeas.Scaled251711.323.123.10.9690.9690.4820.4824501732.523.123.10.8600.8600.4280.4288751753.823.123.10.8740.8740.4320.432251711.323.123.10.9970.9970.4790.479254501732.523.123.10.9470.9470.4580.4588751753.823.123.10.9900.9900.4710.471251711.323.123.10.8800.8800.4460.4464501732.523.123.10.8160.8160.4130.4138751753.823.123.10.8620.8620.4240.424251711.323.123.10.9940.9940.4830.4834501732.523.123.10.9220.9220.4470.4478751753.823.123.10.8730.8730.4170.417251711.319.019.00.7550.7550.3760.3764501732.519.019.00.8430.8430.4190.4198751753.819.019.00.9170.9170.4560.456251711.319.019.00.8160.8160.4380.4384501732.519.019.00.8590.8590.4480.4488751753.819.019.00.9210.9210.4660.466Rear4501732.519.019.00.7970.7970.3950.395Front4501732.519.019.00.7600.7600.4020.402Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionRearAntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)RearUAT1xRTT(RC3 SO32)5Front1xEVDO(Rel. 0)5RearFront51xEVDO(Rel. 0)LAT1xRTT(RC3 SO32)5FrontTune-up limitMeas.Meas.ScaledMeas.Scaled251711.323.123.10.9700.9700.4670.4674501732.523.123.10.9830.9830.4630.4638751753.823.123.10.8420.8420.3890.389Edge 24501732.523.123.10.0250.0250.0150.015Edge 44501732.523.123.10.5640.5640.3140.314251711.323.123.10.9450.9450.4380.4384501732.523.123.10.8760.8760.4060.4068751753.823.123.10.8110.8110.3870.387Edge 24501732.523.123.10.0240.0240.0140.014Edge 44501732.523.123.10.5560.5560.3100.310Edge 24501732.519.019.00.4650.4650.2590.259251711.319.019.00.9830.9830.4800.4804501732.519.019.00.9450.9450.4630.4638751753.819.019.01.0201.0200.4910.49126Edge 44501732.519.019.00.0490.0490.0280.028Edge 24501732.519.019.00.4340.4340.2420.242251711.319.019.00.8910.8910.4410.4414501732.519.019.00.8800.8800.4350.4358751753.819.019.00.9160.9160.4490.449Edge 44501732.519.019.00.0470.0470.0270.027AntennaFreq. (MHz)10-g SAR (W/kg) Ch #.Power (dBm)Plot No.Dist.(mm)1-g SAR (W/kg)ModeTest PositionEdge 3UAT1xRTT(RC3 SO32)5Edge 11xEVDO(Rel. 0)5Edge 1LAT1xRTT(RC3 SO32)51xEVDO(Rel. 0)5Edge 3 Report No.: 14U17673-S1C 11.10. LTE Band 2 (20MHz Bandwidth) 11.10.1. Head Issue Date: 8/15/2014 11.10.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 128 of 193 Meas.ScaledMeas.Scaled14920.120.10.3690.3690.1920.192502419.119.10.2890.2890.1500.15014920.120.10.3570.3570.1740.174502419.119.10.2860.2860.1390.13914920.120.00.9400.9620.4900.50114920.120.10.9690.9690.5040.504502419.119.10.7920.7920.4110.41114920.120.00.9300.9520.4820.49314920.120.10.7450.7450.3770.377502419.119.10.5870.5870.2960.29614923.7523.750.5160.5160.3350.335502422.7522.750.4140.4140.2690.26914923.7523.750.4850.4850.2800.280502422.7522.750.3850.3850.2210.22114923.7523.30 0.8170.9060.5070.56214923.7523.750.9750.9750.6000.60027502422.7522.750.7840.7840.4830.48314923.7523.600.8840.9150.5430.56214923.7523.750.4730.4730.2930.293502422.7522.750.3870.3870.2400.240AntennaTune-up LimitModeLeft Touch18900Left Tilt Test PositionUL RB AllocationDist.(mm)UL Ch #.1900.01880.0189001880.0191001-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.1880.0Left TiltUATQPSK01880.0RightTouch187001860.018900191001900.0Right Tilt189001880.0LATQPSK0Left Touch18900Right Tilt189001880.0189001880.0Right Touch187001860.0189001880.0Meas.ScaledMeas.Scaled14923.423.2 0.9170.9600.4460.46714923.423.40.9360.9360.4550.455502422.422.40.7630.7630.3710.371191001900.014923.423.30.9510.9730.4630.474187001860.014923.423.2 0.8290.8680.4040.42314923.423.40.8200.8200.4010.401502422.422.40.6630.6630.3240.324191001900.014923.423.20.8510.8910.4170.43714918.518.41.0101.0340.4830.494502417.517.00.7810.8760.3720.41714918.518.51.0501.0500.5050.505502417.517.00.7970.8940.3830.430100017.517.00.6820.7650.3270.36714918.518.51.1401.1400.5400.54028502417.517.00.6850.7690.3280.36814918.518.40.8190.8380.3820.39114918.518.50.8770.8770.4060.406502417.517.00.6440.7230.2980.334191001900.014918.518.50.8560.8560.4000.40010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.UL RB StartPlot No.AntennaTune-up LimitMeas. Pwr (dBm)187001860.0Test PositionUL RB AllocationDist.(mm)Mode1880.0Rear187001860.018900Rear189001880.0189001880.0191001900.0187001860.0189001880.0FrontUATQPSK5FrontLATQPSK5 Report No.: 14U17673-S1C Hotspot Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 129 of 193 Meas.ScaledMeas.Scaled14923.423.2 0.9300.9740.4250.44514923.423.40.9760.9760.4470.447502422.422.40.7800.7800.3570.35714923.423.20.8240.8630.3760.39414923.423.40.0730.0730.0410.041502422.422.40.0560.0560.0300.03014923.423.40.6220.6220.3420.342502422.422.40.3840.3840.2110.21114918.518.50.3690.3690.2030.203502417.517.00.2730.3060.1500.16814918.518.50.6590.6590.3000.300502417.517.00.4970.5580.2250.25214918.518.50.1020.1020.0570.057502417.517.00.0760.0850.0420.047189001880.0LATQPSK5Edge 2189001880.0Edge 3189001880.0Edge 41900.0Edge 2189001880.0Edge 4189001880.0UATQPSK5Edge 1187001860.0189001880.01910010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Tune-up LimitDist.(mm)ModeAntennaPlot No.UL RB StartTest PositionUL RB AllocationMeas. Pwr (dBm) Report No.: 14U17673-S1C 11.11. LTE Band 4 (20MHz Bandwidth) 11.11.1. Head Issue Date: 8/15/2014 11.11.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 130 of 193 Meas.ScaledMeas.Scaled14919.919.90.3250.3250.1790.179502418.918.90.2510.2510.1360.13614919.919.90.3750.3750.2080.208502418.918.90.2920.2920.1620.162200501720.014919.919.80.9750.9980.5100.5222914919.919.90.9680.9680.5040.504502418.918.90.7470.7470.3880.388203001745.014919.919.90.9400.9400.4890.48914919.919.90.6840.6840.3490.349502418.918.90.5340.5340.2700.27014924.024.00.2520.2520.1720.172502423.023.00.1890.1890.1300.13014924.024.00.2200.2200.1400.140502423.023.00.1820.1820.1150.11514924.024.00.6450.6450.4100.410502423.023.00.4990.4990.3180.31814924.024.00.1940.1940.1250.125502423.023.00.1500.1500.0960.096UL Ch #.201751-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.AntennaTune-up LimitMode1732.51732.51732.520175Test PositionUL RB AllocationDist.(mm)Right TiltLeft Tilt 2017520175Left Tilt201751732.5UATQPSK0Left Touch1732.5RightTouch201751732.51732.5Right TouchRight Tilt201751732.5LATQPSK0Left Touch20175Meas.ScaledMeas.Scaled14923.123.10.9800.9800.4920.492502422.122.10.7840.7840.3920.39214923.123.10.9950.9950.4940.494502422.122.10.8290.8290.4100.410100022.122.10.7570.7570.3790.37914923.123.00.9230.9440.4610.472502422.122.00.7470.7640.3720.381200501720.014923.123.10.9630.9630.4730.47314923.123.10.9840.9840.4760.476502422.122.10.7940.7940.3830.383203001745.014923.123.00.8890.9100.4350.445200501720.014919.019.00.9600.9600.4690.46914919.019.01.0201.0200.4970.497502418.018.00.7910.7910.3830.383203001745.014919.019.01.1001.1000.5320.53230200501720.014919.019.00.6630.6630.3590.35914919.019.00.8290.8290.4350.435502418.018.00.6380.6380.3340.334203001745.014919.019.00.7490.7490.3930.393LATQPSK5Rear20300174514919.019.01.0401.0400.5050.505Front201751732.5LATQPSK5Rear201751732.5Front201751732.5UATQPSK5Rear200501720.0201751745.0AntennaTune-up LimitMeas. Pwr (dBm)Test PositionUL RB AllocationDist.(mm)ModeSAR Measurement Variability10-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Plot No.UL RB Start1732.520300 Report No.: 14U17673-S1C Hotspot Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 131 of 193 Meas.ScaledMeas.Scaled200501720.014923.123.10.9790.9790.4720.47214923.123.10.9300.9300.4480.448502422.122.10.7370.7370.3530.353203001745.014923.123.00.8790.8990.4210.43114923.123.10.0330.0330.0200.020502422.122.10.0270.0270.0160.01614923.123.10.6670.6670.3720.372502422.122.10.5400.5400.3010.30114919.019.00.4230.4230.2360.236502418.017.90.3240.3320.1800.184200501720.014919.019.00.8500.8500.4180.41814919.019.00.8550.8550.4200.420502418.017.90.6690.6850.3270.335203001745.014919.019.00.8950.8950.4370.43714919.019.00.0450.0450.0260.026502418.017.90.0350.0360.0200.020201751732.5Edge 4201751732.51732.5LATQPSK5Edge 2201751732.5Edge 31732.5Edge 2201751732.5UATQPSK5Edge 120175Edge 42017510-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Tune-up LimitDist.(mm)ModeAntennaPlot No.UL RB StartTest PositionUL RB AllocationMeas. Pwr (dBm) Report No.: 14U17673-S1C 11.12. LTE Band 5 (10MHz Bandwidth) 11.12.1. Head Issue Date: 8/15/2014 11.12.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 132 of 193 Meas.ScaledMeas.Scaled12423.723.70.5920.5920.3900.390251222.722.70.4680.4680.3100.31012423.723.70.4850.4850.2800.280251222.722.70.3780.3780.2180.21812423.723.70.6120.6120.3800.38031251222.722.70.4760.4760.2950.29512423.723.70.3260.3260.1850.185251222.722.70.2540.2540.1440.14412424.024.00.2880.2880.2200.220251223.023.00.2190.2190.1680.16812424.024.00.1500.1500.1150.115251223.023.00.1150.1150.0880.08812424.024.00.2300.2300.1770.177251223.023.00.1750.1750.1340.13412424.024.00.1630.1630.1230.123251223.023.00.1250.1250.0950.0951-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.836.6Test PositionUL RB AllocationDist.(mm)UL Ch #.RightTouch20525Left Touch0836.6836.620525836.6836.6836.6836.6836.6AntennaTune-up LimitModeLATQPSKQPSKLeft TouchUATRight Tilt20525020525Right TiltLeft TiltRight TouchLeft Tilt 20525205252052520525Meas.ScaledMeas.Scaled12423.723.70.2430.2430.1520.152251222.722.70.2100.2100.1300.13012423.723.70.2360.2360.1400.140251222.722.70.2240.2240.1320.13212424.024.00.3720.3720.2440.244251223.023.00.2890.2890.1890.18912424.024.00.4370.4370.2500.25032251223.023.00.3390.3390.1930.19310-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Plot No.UL RB AllocationDist.(mm)UL RB StartAntennaTune-up LimitMeas. Pwr (dBm)Test PositionModeUATRear20525836.620525836.6QPSK5FrontLATQPSK5Rear20525836.6Front20525836.6Meas.ScaledMeas.Scaled12423.723.70.1340.1340.0600.060251222.722.70.1150.1150.0510.05112423.723.70.3420.3420.2230.223251222.722.70.3200.3200.2090.20912423.723.70.2190.2190.1420.142251222.722.70.1720.1720.1110.11112424.024.00.2490.2490.1620.162251223.023.00.1960.1960.1260.12612424.024.00.2580.2580.1220.122251223.023.00.2110.2110.1000.10012424.024.00.6380.6380.4150.41533251223.023.00.4930.4930.3200.320LATQPSK5QPSK5Meas. Pwr (dBm)836.6Edge 420525836.6Edge 320525Edge 1UL RB StartTest PositionUL RB Allocation20525836.6Edge 220525Dist.(mm)ModeAntenna20525UATPlot No.Edge 2Edge 4836.620525836.610-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.836.6Tune-up Limit Report No.: 14U17673-S1C 11.13. LTE Band 13 (10MHz Bandwidth) 11.13.1. Head Issue Date: 8/15/2014 11.13.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 133 of 193 Meas.ScaledMeas.Scaled12423.723.70.5430.5430.3560.35634251222.722.70.4430.4430.2910.29112423.723.70.4070.4070.2530.253251222.722.70.3420.3420.2100.21012423.723.70.4820.4820.2950.295251222.722.70.3910.3910.2370.23712423.723.70.3780.3780.2210.221251222.722.70.3080.3080.1800.18012424.024.00.3600.3600.2770.277251223.023.00.2910.2910.2240.22412424.024.00.2110.2110.1640.164251223.023.00.1690.1690.1310.13112424.024.00.2910.2910.2210.221251223.023.00.2380.2380.1800.18012424.024.00.2000.2000.1560.156251223.023.00.1560.1560.1220.122023230Right TiltLeft TiltRight TouchLeft Tilt 23230232302323023230AntennaTune-up LimitModeLATQPSKQPSKLeft TouchUATRight Tilt23230782.023230782.0782.0782.0782.0782.0782.0Test PositionUL RB AllocationDist.(mm)UL Ch #.RightTouch23230Left Touch0782.01-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.Meas.ScaledMeas.Scaled12423.723.70.2510.2510.1480.148251222.722.70.2030.2030.1200.12012423.723.70.2520.2520.1500.150251222.722.70.2020.2020.1200.12012424.024.00.5250.5250.3800.380251223.023.00.4310.4310.3110.31112424.024.00.5280.5280.3380.33835251223.023.00.4300.4300.2750.275QPSK55FrontRearFront23230782.023230782.0LATQPSKAntennaTune-up LimitMeas. Pwr (dBm)RearUAT23230782.0Test PositionUL RB AllocationDist.(mm)Mode2323010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Plot No.UL RB Start782.0Meas.ScaledMeas.Scaled12423.723.70.1700.1700.0780.078251222.722.70.1320.1320.0610.06112423.723.70.3840.3840.2520.252251222.722.70.3120.3120.2050.20512423.723.70.2530.2530.1660.166251222.722.70.2060.2060.1350.13512424.024.00.3880.3880.2540.254251223.023.00.3840.3840.2500.25012424.024.00.3860.3860.1810.181251223.023.00.3000.3000.1410.14112424.024.00.6960.6960.4590.45936251223.023.00.5710.5710.3760.376782.023230782.010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.782.0Tune-up LimitDist.(mm)ModeAntenna23230UATPlot No.Edge 2Edge 4Edge 323230Edge 1UL RB StartTest PositionUL RB Allocation23230782.0Edge 223230LATQPSK5QPSK5Meas. Pwr (dBm)782.0Edge 423230782.0 Report No.: 14U17673-S1C 11.14. LTE Band 17 (10MHz Bandwidth) 11.14.1. Head Issue Date: 8/15/2014 11.14.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 134 of 193 Meas.ScaledMeas.Scaled12423.723.70.3940.3940.2960.296251222.722.70.3480.3480.2600.26012423.723.70.2510.2510.1690.169251222.722.70.2180.2180.1460.14612423.723.70.4710.4710.2930.293251222.722.70.3770.3770.2350.23512423.723.70.4730.4730.2730.27337251222.722.70.3810.3810.2190.21912424.024.00.1980.1980.1540.154251223.023.00.1620.1620.1260.12612424.024.00.1090.1090.0840.084251223.023.00.0860.0860.0670.06712424.024.00.1750.1750.1340.134251223.023.00.1400.1400.1070.10712424.024.00.1280.1280.0880.088251223.023.00.1300.1300.0980.0981-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.710.0Test PositionUL RB AllocationDist.(mm)UL Ch #.RightTouch23790Left Touch0710.0710.023790710.0710.0710.0710.0710.0AntennaTune-up LimitModeLATQPSKQPSKLeft TouchUATRight Tilt23790023790Right TiltLeft TiltRight TouchLeft Tilt 23790237902379023790Meas.ScaledMeas.Scaled12423.723.70.2050.2050.1470.147251222.722.70.1620.1620.1160.11612423.723.70.2540.2540.2020.202251222.722.70.2000.2000.1590.15912424.024.00.3470.3470.2410.241251223.023.00.2750.2750.1900.19012424.024.00.3680.3680.2160.21638251223.023.00.3040.3040.1780.178QPSK55FrontRearFront23790710.023790710.0LATQPSKAntennaTune-up LimitMeas. Pwr (dBm)RearUAT23790710.0Test PositionUL RB AllocationDist.(mm)Mode2379010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Plot No.UL RB Start710.0Meas.ScaledMeas.Scaled12423.723.70.0750.0750.0370.037251222.722.70.0580.0580.0290.02912423.723.70.2720.2720.1820.182251222.722.70.2170.2170.1450.14512423.723.70.2340.2340.1560.156251222.722.70.1830.1830.1220.12212424.024.00.2490.2490.1670.167251223.023.00.2070.2070.1390.13912424.024.00.2570.2570.1260.126251223.023.00.1700.1700.0850.08512424.024.00.5160.5160.3470.34739251223.023.00.4040.4040.2720.272LATQPSK5QPSK5Meas. Pwr (dBm)710.0Edge 423790710.0Edge 323790Edge 1UL RB StartTest PositionUL RB Allocation23790710.0Edge 223790Dist.(mm)ModeAntenna23790UATPlot No.Edge 2Edge 4710.023790710.010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.710.0Tune-up Limit Report No.: 14U17673-S1C 11.15. LTE Band 25 (20MHz Bandwidth) 11.15.1. Head Issue Date: 8/15/2014 11.15.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 135 of 193 Meas.ScaledMeas.Scaled14920.120.10.3920.3920.2030.203502419.119.10.3120.3120.1600.16014920.120.10.3670.3670.1900.190502419.119.10.2940.2940.1510.151261401860.014920.119.90.9090.9520.4710.49314920.120.10.8870.8870.4620.462502419.119.10.7160.7160.3720.372265901905.014920.119.90.9260.9700.4910.5144014920.120.10.7470.7470.3780.378502419.119.10.6080.6080.3080.30814923.523.50.6270.6270.4080.408502422.522.50.5090.5090.3300.33014923.523.50.5090.5090.3080.308502422.522.50.4090.4090.2470.247261401860.014923.523.50.9260.9260.5860.58614923.523.50.9670.9670.6050.605502422.522.50.7770.7770.4850.485265901905.014923.523.40.9100.9310.5650.57814923.523.50.4870.4870.2940.294502422.522.50.4200.4200.2510.2511882.51882.5Right Touch263651882.5Left Tilt263651882.5LATQPSK0Left Touch263651882.5UATRight Tilt263650Left Touch1882.5RightTouch263651882.5Left Tilt 26365Right Tilt26365AntennaTune-up LimitMode1882.526365Test PositionUL RB AllocationDist.(mm)UL Ch #.QPSK1-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.Meas.ScaledMeas.Scaled14923.423.20.8090.8470.3990.41814923.423.40.9120.9120.4430.443502422.422.40.7500.7500.3680.36814923.423.40.9730.9730.4720.47214923.423.20.9270.9710.4440.46514923.423.40.9240.9240.4450.445502422.422.40.7780.7780.3750.375265901905.014923.423.40.9580.9580.4620.46214918.518.51.0001.0000.4670.467502417.517.50.7490.7490.3480.34814918.518.51.0801.0800.5110.51141502417.517.50.8060.8060.3810.381100017.517.50.8060.8060.3820.38214918.518.51.0401.0400.4810.481502417.517.50.7940.7940.3660.366261401860.014918.518.50.7950.7950.3760.37614918.518.50.8740.8740.4060.406502417.517.50.5880.5880.2740.274265901905.014918.518.50.7660.7660.3610.36126365UATQPSK1882.5265901905.0261401860.010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Tune-up LimitDist.(mm)ModeAntennaPlot No.UL RB StartTest PositionUL RB AllocationMeas. Pwr (dBm)1882.5265901905.051860.0Front263651882.5Rear26140Front263651882.5LATQPSK5Rear261401860.026365 Report No.: 14U17673-S1C Hotspot Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 136 of 193 Meas.ScaledMeas.Scaled14923.423.20.9090.9520.4160.43614923.423.40.9130.9130.4200.420502422.422.40.7970.7970.3620.36214923.423.40.9330.9330.4180.41814923.423.40.0610.0610.0330.033502422.422.40.0530.0530.0290.02914923.423.40.4820.4820.2670.267502422.422.40.4140.4140.2310.23114918.518.50.4320.4320.2360.236502417.517.50.3180.3180.1740.17414918.518.50.7570.7570.3420.342502417.517.50.5650.5650.2540.25414918.518.50.1030.1030.0570.057502417.517.50.0760.0760.0420.042Dist.(mm)ModeAntennaPlot No.UL RB StartTest PositionUL RB AllocationMeas. Pwr (dBm)10-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.1860.0Tune-up LimitUATQPSK5Edge 12614026365Edge 426365Edge 3263651882.51882.5265901905.0Edge 2263651882.5Edge 4263651882.51882.5LATQPSK5Edge 2263651882.5 Report No.: 14U17673-S1C 11.16. LTE Band 26 (10MHz Bandwidth) 12.16.1. Head Issue Date: 8/15/2014 12.16.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 137 of 193 Meas.ScaledMeas.Scaled12423.023.00.4210.4210.2740.274251222.022.00.3490.3490.2270.22712423.023.00.3180.3180.1880.188251222.022.00.2610.2610.1550.15512423.023.00.4640.4640.2950.29542251222.022.00.3820.3820.2430.24312423.023.00.2640.2640.1550.155251222.022.00.2190.2190.1290.12912423.023.00.1590.1590.1220.122251222.022.00.1270.1270.0980.09812423.023.00.1010.1010.0780.078251222.022.00.0820.0820.0630.06312423.023.00.1340.1340.1030.103251222.022.00.1060.1060.0820.08212423.023.00.1020.1020.0790.079251222.022.00.0830.0830.0640.064Right Tilt 26740819.0LATQPSK0Right Touch26740819.026740819.0Left Tilt 26740819.0Left TouchRight TouchRight Tilt 26740819.026740819.026740819.02674010-g SAR (W/kg)Plot No.0Test PositionUL RB AllocationDist.(mm)Left Tilt Left Touch819.0UATQPSK1-g SAR (W/kg)Freq. (MHz)UL Ch #.ModeAntennaUL RB StartTune-up LimitMeas. Pwr (dBm)Meas.ScaledMeas.Scaled12423.023.00.1790.1790.1150.115251222.022.00.1470.1470.0950.09512423.023.00.2010.2010.1580.158251222.022.00.1650.1650.1300.13012423.023.00.2270.2270.1530.15343251222.022.00.1860.1860.1250.12512423.023.00.2100.2100.1340.134251222.022.00.1780.1780.1130.113LATQPSK26740819.026740819.0Freq. (MHz)UL Ch #.FrontRearRearFrontUL RB StartAntenna26740819.0UATQPSKTest PositionUL RB AllocationDist.(mm)Mode55Plot No.2674010-g SAR (W/kg)1-g SAR (W/kg)819.0Tune-up LimitMeas. Pwr (dBm)Meas.ScaledMeas.Scaled12423.023.00.0950.0950.4290.429251222.022.00.0800.0800.3540.35412423.023.00.2940.2940.1940.194251222.022.00.2450.2450.1610.16112423.023.00.2020.2020.1320.132251222.022.00.1650.1650.1070.10712423.023.00.1700.1700.1110.111251222.022.00.1370.1370.0900.09012423.023.00.1210.1210.0590.059251222.022.00.0990.0990.0480.04812423.023.00.3700.3700.2430.24344251222.022.00.2990.2990.1960.196819.0Edge 426740819.0Tune-up LimitMeas. Pwr (dBm)26740819.026740819.0Antenna819.0UATEdge 3Edge 4Edge 2LATQPSK526740Dist.(mm)Mode26740819.0QPSK5Test PositionEdge 2Edge 1Plot No.2674010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.UL RB StartUL RB Allocation Report No.: 14U17673-S1C 11.17. LTE Band 41 (20MHz Bandwidth) 11.17.1. Head Issue Date: 8/15/2014 11.17.2. Body-worn Accessory & Hotspot Body-worn Accessory & Hotspot UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 138 of 193 Meas.ScaledMeas.Scaled14922.522.50.3160.3160.1330.133502421.521.50.2950.2950.1230.12314922.522.50.3720.3720.1540.154502421.521.50.3690.3690.1500.15014922.522.50.7120.7120.3140.31445502421.521.50.6270.6270.2810.28114922.522.50.4430.4430.2200.220502421.521.50.3900.3900.1910.19114922.522.50.2650.2650.1460.146502421.521.40.1610.1650.0840.08614922.522.50.0900.0900.0400.040502421.521.40.0870.0890.0330.03414922.522.50.5010.5010.2670.267502421.521.40.4080.4180.2160.22114922.522.50.1830.1830.0830.083502421.521.40.1480.1510.0670.068LATQPSK02593.0Right TouchRight Tilt406202593.02593.02593.0UATQPSKLeft Touch2593.02593.0Right Tilt40620406202593.02593.01-g SAR (W/kg)10-g SAR (W/kg)Meas. Pwr (dBm)UL RB StartFreq. (MHz)Plot No.Dist.(mm)UL Ch #.40620RightTouch40620Left Touch04062040620AntennaTune-up LimitMode40620Left TiltLeft Tilt Test PositionUL RB AllocationMeas.ScaledMeas.Scaled14922.522.50.8430.8430.3400.34014922.522.50.9030.9030.3610.36114922.522.50.9790.9790.3840.384502421.521.50.7560.7560.3010.30114922.522.50.9670.9670.3680.36814922.522.40.9160.9370.3350.34314922.522.50.5610.5610.2400.240502421.521.50.3370.3370.1440.14414919.019.00.9450.9450.4450.445502418.018.00.5560.5560.2640.26414919.019.01.1801.1800.4100.410502418.018.00.9120.9120.3160.31614919.019.01.0101.0100.4740.474502418.018.00.8910.8910.3020.302100018.018.00.6620.6620.2370.23714919.018.81.0801.1310.3800.398502418.018.00.7600.7600.2490.24914919.019.01.1801.1800.4060.40646502418.018.00.8890.8890.3000.30014919.019.00.3610.3610.1500.150502418.018.00.2940.2940.1200.120LATQPSK5Rear41490268014919.019.01.1501.1500.4390.439SAR Measurement Variability10-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.Plot No.UL RB AllocationDist.(mm)UL RB Start2636.5AntennaTune-up LimitMeas. Pwr (dBm)Test PositionModeUATQPSK5LATQPSK5Rear397502506.0401852549.5406202593.0410552636.5414902680.0Front406202593.0Rear3975041055414902680.0Front406202593.02506.0401852549.5406202593.0 Report No.: 14U17673-S1C Hotspot Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 139 of 193 Meas.ScaledMeas.Scaled14922.522.50.2650.2650.1130.113502421.521.50.2250.2250.0960.09614922.522.50.1360.1360.0620.062502421.521.50.0390.0390.0160.01614922.522.50.2650.2650.1270.127502421.521.50.2260.2260.1080.10814919.019.00.3280.3280.1470.147502418.018.00.2350.2350.1080.10814919.019.00.5090.5090.2150.215502418.018.00.3140.3140.1370.13714919.019.00.2690.2690.1250.125502418.018.00.1680.1680.0750.075LATQPSK5QPSK5Meas. Pwr (dBm)2593.0Edge 4406202593.0Edge 340620Edge 1UL RB StartTest PositionUL RB Allocation406202593.0Edge 240620Dist.(mm)ModeAntenna40620UATPlot No.Edge 2Edge 42593.0406202593.010-g SAR (W/kg)1-g SAR (W/kg)Freq. (MHz)UL Ch #.2593.0Tune-up Limit Report No.: 14U17673-S1C 11.18. Wi-Fi 2.4GHz 11.18.1. Head (PCell_ON) Worst Case Spot Check 11.18.2. Head (PCell_OFF) Worst Case Spot Check Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 140 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch6243715.014.90.3060.3130.1280.131Left Tilt6243715.014.90.3360.3440.1410.144Right Touch6243715.014.90.4980.5100.2300.235Right Tilt 6243715.014.90.3940.4030.1730.177Power (dBm)ModePlot No.Wi-FiVariantTest PositionFreq. (MHz)10-g SAR (W/kg)Dist.(mm)1-g SAR (W/kg)Variant 3802.11b0 Ch #.Tune-up limitMeas.Meas.ScaledMeas.ScaledVariant 1802.11b0Right Touch6243715.015.00.4980.4980.2330.233Variant 2802.11b0Right Touch6243715.014.90.4130.4230.1930.19710-g SAR (W/kg)Wi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test PositionTune-up limitMeas.Meas.ScaledMeas.ScaledLeft Touch6243718.018.00.6000.6000.2520.252Left Tilt6243718.018.00.7070.7070.2960.2961241218.018.00.8030.8030.3800.3806243718.018.01.1201.1200.5200.52011246218.018.01.1501.1500.5320.532471241218.018.00.7380.7380.3140.3146243718.018.00.8500.8500.3680.36811246218.018.00.6650.6650.3390.339Power (dBm)ModePlot No.Wi-FiVariantTest PositionFreq. (MHz)10-g SAR (W/kg)Dist.(mm)1-g SAR (W/kg) Ch #.Variant 3802.11b0Right TouchRight Tilt Tune-up limitMeas.Meas.ScaledMeas.ScaledVariant 1802.11b0Right Touch11246218.018.01.0101.0100.4690.469Variant 2802.11b0Right Touch11246218.017.90.9330.9550.4360.44610-g SAR (W/kg)Wi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position Report No.: 14U17673-S1C Issue Date: 8/15/2014 11.18.3. Body-worn Accessory & Hotspot (PCell_ON) Worst Case Spot Check 11.18.4. Body-worn Accessory & Hotspot (PCell_OFF) Worst Case Spot Check UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 141 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledRear6243715.014.90.5730.5860.2340.239Front6243715.014.90.2700.2760.1180.121Edge 16243715.014.90.2790.2850.1240.127Edge 26243715.014.90.1140.1170.0560.058Edge 46243715.014.90.2720.2780.1310.134Variant 3802.11b5Plot No.Wi-FiVariantTest PositionFreq. (MHz)10-g SAR (W/kg)Dist.(mm)1-g SAR (W/kg) Ch #.Power (dBm)ModeTune-up limitMeas.Meas.ScaledMeas.ScaledVariant 1802.11b5Rear6243715.015.00.4990.4990.2040.204Variant 2802.11b5Rear6243715.014.90.4920.5030.2030.20810-g SAR (W/kg)Wi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test PositionTune-up limitMeas.Meas.ScaledMeas.Scaled1241218.018.00.9080.9080.3680.3686243718.018.01.1501.1500.4790.4794811246218.018.01.0701.0700.4470.447Front6243718.018.00.5500.5500.2430.243Edge 16243718.018.00.6080.6080.2760.276Edge 26243718.018.00.2230.2230.1120.112Edge 46243718.018.00.6500.6500.3140.314Variant 3802.11b5Rear6243718.018.01.1301.1300.4720.472Variant 3802.11b5RearMode1-g SAR (W/kg) Ch #.SAR Measurement VariabilityPlot No.Wi-FiVariantTest PositionFreq. (MHz)10-g SAR (W/kg)Dist.(mm)Power (dBm)Tune-up limitMeas.Meas.ScaledMeas.ScaledVariant 1802.11b5Rear6243718.018.00.9710.9710.4040.404Variant 2802.11b5Rear6243718.018.01.1201.1200.4630.46310-g SAR (W/kg)Wi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position Report No.: 14U17673-S1C 11.19. Wi-Fi 5GHz 11.19.1. Head Issue Date: 8/15/2014 Worst Case Spot Check UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 142 of 193 Tune-up limitMeas.Meas.ScaledMeas.Scaled36518012.012.00.1640.1640.0540.05452526011.011.00.1550.1550.0420.04212456209.09.00.2190.2190.0600.060157578511.511.50.2130.2130.0610.06136518012.012.00.1740.1740.0590.05952526011.011.00.1830.1830.0510.05112456209.09.00.1530.1530.0390.039157578511.511.50.1890.1890.0560.05636518012.012.00.4580.4580.0820.0824952526011.011.00.3960.3960.0910.09112456209.09.00.3510.3510.0740.074157578511.511.50.4730.4730.0980.09836518012.012.00.3200.3200.0570.05752526011.011.00.3620.3620.0830.08312456209.09.00.2700.2700.0590.059157578511.511.50.4900.4900.1020.10250Variant 3802.11a6 Mbps0Left TouchLeft TiltRight TouchRight TiltWi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position10-g SAR (W/kg)Tune-up limitMeas.Meas.ScaledMeas.Scaled36518012.012.00.3710.3710.0910.09152526011.011.00.4030.4030.0850.0855112456209.09.00.3120.3120.0700.070Right Tilt157578511.511.50.4410.4410.0930.09336518012.012.00.3700.3700.0900.09052526011.011.00.3780.3780.0870.08712456209.08.90.4670.4780.1000.10252Right Tilt157578511.511.50.4230.4230.1090.109Right Touch0Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test PositionRight Touch10-g SAR (W/kg)Variant 2802.11a6 Mbps0Wi-FiVariantModeDist.(mm)Variant 1802.11a6 Mbps Report No.: 14U17673-S1C 11.19.2. Body-worn Accessory & Airplay Issue Date: 8/15/2014 Worst Case Spot Check 11.19.3. 802.11ac Mode UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 143 of 193 Tune-up limitMeas.Meas.ScaledMeas.Scaled48524018.017.90.3110.3180.0820.08452532017.016.90.3160.3230.1280.131124558014.514.50.2390.2390.0610.061157578517.017.00.3110.3110.0870.08748524018.017.90.3670.3760.1100.1135352532017.016.90.3950.4040.1250.12854124558014.514.50.3710.3710.1010.101157578517.017.00.3850.3850.1160.1165548524018.017.90.1920.1960.0660.06852526017.017.00.1130.1130.0370.037124562014.514.50.1120.1120.0350.035157578517.017.00.2450.2450.0990.09948524018.017.90.2500.2560.0780.08052526017.017.00.3440.3440.1090.109124562014.514.50.1370.1370.0430.043157578517.017.00.2520.2520.0980.098FrontEdge 1Edge 4Wi-FiVariantModeDist.(mm)Variant 3802.11a6 Mbps5RearPlot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position10-g SAR (W/kg)Tune-up limitMeas.Meas.ScaledMeas.Scaled48524018.017.90.3220.3300.0920.09452526017.017.00.3310.3310.0870.087124562014.514.50.3240.3240.0870.087157578517.017.00.3780.3780.1210.12148524018.017.90.3320.3400.0970.09952526017.017.00.3340.3340.1120.112124562014.514.50.3950.3950.1040.10456157578517.016.90.3370.3450.1000.102802.11a6 Mbps5Variant 2802.11a6 Mbps5Wi-FiVariantModeDist.(mm)Variant 1FrontFrontPlot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position10-g SAR (W/kg)Tune-up limitMeas.Meas.ScaledMeas.Scaled48524018.017.90.3370.3450.0800.08252526017.017.00.3590.3590.0820.082104552014.514.50.2810.2810.0620.062Right Tilt157578511.511.50.4280.4280.1010.10148524018.017.90.2790.2850.0820.08452526017.017.00.2750.2750.0800.080116558014.514.50.2660.2660.0760.076157578517.016.90.2640.2700.0830.085Wi-FiVariantPlot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)10-g SAR (W/kg)ModeDist.(mm)Test PositionVariant 3802.11ac(20MHz)5Front0Right Touch Report No.: 14U17673-S1C 11.20. Bluetooth 11.20.1. Body-worn Accessory Worst Case Spot Check Issue Date: 8/15/2014 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 144 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledRear39244112.012.00.0800.0800.0330.033Front39244112.012.00.0310.0310.0130.013Wi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position10-g SAR (W/kg)Variant 3GFSK5Tune-up limitMeas.Meas.ScaledMeas.ScaledVariant 1GFSK5Rear39244112.012.00.0780.0780.0300.030Variant 2GFSK5Rear39244112.012.00.0800.0800.0310.031Wi-FiVariantModeDist.(mm)Plot No. Ch #.Freq. (MHz)Power (dBm)1-g SAR (W/kg)Test Position10-g SAR (W/kg) Report No.: 14U17673-S1C Measured SAR Results for Model A1549 Issue Date: 8/15/2014 Testing for Model A1549 was performed on a spot check basis for the worst-case positions established from model A1586. 11.21. Worst Case Spot Check UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 145 of 193 Tune-up limitMeas.Meas.ScaledMeas.ScaledGSM850UATGPRS 2 Slots0Left Touch190836.632.232.20.7030.7030.5080.508GSM1900LATEGPRS 2 Slots5Rear8101909.826.826.81.1401.1400.5540.554W-CDMA Band VLATRel. 99 RMC5Edge 44183836.625.025.00.8120.8120.5300.530W-CDMA Band IVUATRel. 99 RMC5Edge 113121712.423.123.10.9630.9630.4740.474W-CDMA Band IILATRel. 99 RMC0Right Touch94001880.024.2524.251.0301.0300.6330.633CDMA BC0LAT1xRTT RC3 SO325Edge 4777848.325.024.70.8220.8810.5360.574CDMA BC1LAT1xEVDO Rel. 00Right Touch11751908.7524.2524.251.0801.0800.6700.670CDMA BC10LAT1xRTT RC3 SO320Edge 4580820.525.025.00.5980.5980.3870.387CDMA BC15LAT1xRTT RC3 SO325Edge 38751753.7519.019.00.9200.9200.4420.442LTE Band 2LATQPSK,RB 1/490Rear191001900.018.518.51.0401.0400.6330.633LTE Band 4LATQPSK,RB 1/495Rear203001745.019.019.00.9420.9420.4560.456LTE Band 5LATQPSK,RB 1/245Edge 420525836.624.024.00.4860.4860.3190.319LTE Band 13LATQPSK,RB 1/245Edge 423230782.024.024.00.6950.6950.4620.462LTE Band 17LATQPSK,RB 1/245Edge 423790710.024.024.00.4960.4960.3360.336LTE Band 25LATQPSK,RB 1/495Rear263651882.517.517.51.0701.0700.5080.508LTE Band 26UATQPSK,RB 1/245Right Touch26740819.023.023.00.4660.4660.3060.306 Ch #.Power (dBm)BandDist.(mm)1-g SAR (W/kg)ModeTest PositionAntennaFreq. (MHz)10-g SAR (W/kg) Report No.: 14U17673-S1C 12. SAR Measurement Variability Issue Date: 8/15/2014 In accordance with published RF Exposure KDB procedure 865664 D01 SAR measurement 100 MHz to 6 GHz v01. These additional measurements are repeated after the completion of all measurements requiring the same head or body tissue-equivalent medium in a frequency band. The test device should be returned to ambient conditions (normal room temperature) with the battery fully charged before it is re-mounted on the device holder for the repeated measurement(s) to minimize any unexpected variations in the repeated results. 1) Repeated measurement is not required when the original highest measured SAR is < 0.80 W/kg; steps 2) through 4) do not apply. 2) When the original highest measured SAR is 0.80 W/kg, repeat that measurement once. 3) Perform a second repeated measurement only if the ratio of largest to smallest SAR for the original and first repeated measurements is > 1.20 or when the original or repeated measurement is 1.45 W/kg (~ 10% from the 1-g SAR limit). 4) Perform a third repeated measurement only if the original, first or second repeated measurement is 1.5 W/kg and the ratio of largest to smallest SAR for the original, first and second repeated measurements is > 1.20. 12.1. The Highest Measured SAR Configuration in Each Frequency Band Frequency Band

(MHz) 750 Air Interface LTE Band 13 LTE Band 17 850 GSM 850 CDMA BC0 CDMA BC10 WCDMA Band V LTE Band 5 LTE Band 26 1900 GSM 1900 CDMA BC1 Head

(W/kg) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A WCDMA Band II 1.180 LTE Band 2 LTE Band 25 1750 LTE Band 4 WCDMA Band IV CDMA BC15 Wi-Fi 802.11b/g/n LTE Band 41 Wi-Fi 802.11a/n/ac Wi-Fi 802.11a/n/ac Wi-Fi 802.11a/n/ac Wi-Fi 802.11a/n/ac 2400 2600 5200 5300 5500 5800 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Body-worn Accessory Hotspot/Airplay

(W/kg) N/A N/A N/A 0.877 N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.100 N/A N/A 1.150 1.180 N/A N/A N/A N/A

(W/kg) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 146 of 193 Report No.: 14U17673-S1C Repeated Measurement Results 12.2. Head Issue Date: 8/15/2014 Body-worn Hotspot N/A Note(s):

1. Second Repeated Measurement is not required since the ratio of the largest to smallest SAR for the original and first repeated measurement is not > 1.20. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 147 of 193 OriginalRepeatedW-CDMA Band IIRight TouchLATRel. 99 RMC94001880.01.1801.1401.041Test PositionNoteFrequency bandModeFreq. (MHz) Ch #.Meas. SAR (W/kg)Largest to Smallest SAR RatioAntennaOriginalRepeatedCDMA BC0Edge 4LAT1xRTT (RC3 SO32)777848.30.8770.8651.011LTE Band 4RearLATQPSK203001745.01.1001.0401.061Wi-Fi 2.4GHzRearUAT802.11b62437.01.1501.1301.021LTE Band 41RearLATQPSK414902680.01.1801.1501.031Test PositionNoteFrequency bandModeFreq. (MHz) Ch #.Meas. SAR (W/kg)Largest to Smallest SAR RatioAntenna Report No.: 14U17673-S1C Issue Date: 8/15/2014 13. Simultaneous Transmission SAR Analysis KDB 447498 D01 General RF Exposure Guidance v05, introduces a new formula for calculating the SAR to Peak Location Ratio (SPLSR) between pairs of simultaneously transmitting antennas:

SPLSR = (SAR1 + SAR2)1.5 /Ri Where:

SAR1 is the highest reported or estimated SAR for the first of a pair of simultaneous transmitting antennas, in a specific test operating mode and exposure condition SAR2 is the highest reported or estimated SAR for the second of a pair of simultaneous transmitting antennas, in the same test operating mode and exposure condition as the first Ri is the separation distance between the pair of simultaneous transmitting antennas. When the SAR is measured, for both antennas in the pair, it is determined by the actual x, y and z coordinates in the 1-g SAR for each SAR peak location, based on the extrapolated and interpolated result in the zoom scan measurement, using the formula of [(x1-x2)2 + (y1-y2)2 + (z1-z2)2]

A new threshold of 0.04 is also introduced in the draft KDB. Thus, in order for a pair of simultaneous transmitting antennas with the sum of 1-g SAR > 1.6 W/kg to qualify for exemption from Simultaneous Transmission SAR measurements, it has to satisfy the condition of:

(SAR1 + SAR2)1.5 /Ri < 0.04 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 148 of 193 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.1. Sum of the SAR for GSM850 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 149 of 193 GSM850Wi-FiDTS BandWi-FiUNII BandBluetooth0.8030.3131.116No0.8030.2191.022No0.5140.3440.858No0.5140.1890.703No0.7590.5101.269No0.7590.4781.237No0.4720.4030.875No0.4720.4900.962No0.3790.586N/A0.965No0.3790.3230.0800.782No0.3740.276N/A0.650No0.3740.4040.0310.809No0.1980.2850.483No0.1980.1960.394No0.3370.1170.454No0.33700.337No000No000No0.2130.2780.491No0.2130.3440.557NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.2. Sum of the SAR for GSM850 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 150 of 193 GSM850Wi-FiDTS BandWi-FiUNII BandBluetooth0.3890.3130.702No0.3890.2190.608No0.3010.3440.645No0.3010.1890.490No0.3310.5100.841No0.3310.4780.809No0.2230.4030.626No0.2230.4900.713No0.5230.586N/A1.109No0.5230.3230.0800.926No0.5160.276N/A0.792No0.5160.4040.0310.951No00.2850.285No00.1960.196No0.4020.1170.519No0.40200.402No0.29400.294No0.29400.294No0.5490.2780.827No0.5490.3440.893NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.3. Sum of the SAR for GSM1900 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 151 of 193 GSM1900Wi-FiDTS BandWi-FiUNII BandBluetooth0.3080.3130.621No0.3080.2190.527No0.3420.3440.686No0.3420.1890.531No0.9070.5101.417No0.9070.4781.385No0.7230.4031.126No0.7230.4901.213No0.8830.586N/A1.469No0.8830.3230.0801.286No0.9100.276N/A1.186No0.9100.4040.0311.345No0.9140.2851.199No0.9140.1961.110No0.9800.1171.097No0.98000.980No000No000No0.2500.2780.528No0.2500.3440.594NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.4. Sum of the SAR for GSM1900 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 152 of 193 GSM1900Wi-FiDTS BandWi-FiUNII BandBluetooth0.3690.3130.682No0.3690.2190.588No0.3840.3440.728No0.3840.1890.573No0.7620.5101.272No0.7620.4781.240No0.3550.4030.758No0.3550.4900.845No1.1600.586N/A1.746Yes1.1600.3230.0801.563No1.1200.276N/A1.396No1.1200.4040.0311.555No00.2850.285No00.1960.196No0.5250.1170.642No0.52500.525No1.09001.090No1.09001.090No0.1830.2780.461No0.1830.3440.527NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotGSM1900Wi-FiDTS BandWi-FiUNII BandBody-worn Accessory & HotspotRear1.1600.5861.746135.40.017No1FigureSPLSR ( 0.04)Worst-case combinationTestPosition 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No)RF Exposure conditions Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (1) Wi-Fi DTS Band d GSM1900 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 153 of 193 Peak SARXYZmW/gmmmGSM19002.29-0.0179-0.0684-0.184Wi-Fi DTS Band1.480.01560.0628-0.186 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)135.4ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.5. Sum of the SAR for W-CDMA Band V (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 154 of 193 W-CDMABand VWi-FiDTS BandWi-FiUNII BandBluetooth0.9000.3131.213No0.9000.2191.119No0.6500.3440.994No0.6500.1890.839No0.8870.5101.397No0.8870.4781.365No0.5440.4030.947No0.5440.4901.034No0.4620.586N/A1.048No0.4620.3230.0800.865No0.5080.276N/A0.784No0.5080.4040.0310.943No0.2470.2850.532No0.2470.1960.443No0.3290.1170.446No0.32900.329No000No000No0.5860.2780.864No0.5860.3440.930NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.6. Sum of the SAR for W-CDMA Band V (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 155 of 193 W-CDMABand VWi-FiDTS BandWi-FiUNII BandBluetooth0.4080.3130.721No0.4080.2190.627No0.2250.3440.569No0.2250.1890.414No0.3360.5100.846No0.3360.4780.814No0.2180.4030.621No0.2180.4900.708No0.4910.586N/A1.077No0.4910.3230.0800.894No0.5180.276N/A0.794No0.5180.4040.0310.953No00.2850.285No00.1960.196No0.4190.1170.536No0.41900.419No0.31700.317No0.31700.317No0.8590.2781.137No0.8590.3441.203NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.7. Sum of the SAR for W-CDMA Band IV (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 156 of 193 W-CDMABand IVWi-FiDTS BandWi-FiUNII BandBluetooth0.2830.3130.596No0.2830.2190.502No0.3140.3440.658No0.3140.1890.503No0.7540.5101.264No0.7540.4781.232No0.5990.4031.002No0.5990.4901.089No0.8720.586N/A1.458No0.8720.3230.0801.275No0.9770.276N/A1.253No0.9770.4040.0311.412No0.9990.2851.284No0.9990.1961.195No0.0150.1170.132No0.01500.015No000No000No0.6060.2780.884No0.6060.3440.950NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.8. Sum of the SAR for W-CDMA Band IV (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 157 of 193 W-CDMABand IVWi-FiDTS BandWi-FiUNII BandBluetooth0.3100.3130.623No0.3100.2190.529No0.2770.3440.621No0.2770.1890.466No0.7550.5101.265No0.7550.4781.233No0.2970.4030.700No0.2970.4900.787No0.7320.586N/A1.318No0.7320.3230.0801.135No0.8510.276N/A1.127No0.8510.4040.0311.286No00.2850.285No00.1960.196No0.4210.1170.538No0.42100.421No0.74400.744No0.74400.744No0.0410.2780.319No0.0410.3440.385NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.9. Sum of the SAR for W-CDMA Band II (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 158 of 193 W-CDMABand IIWi-FiDTS BandWi-FiUNII BandBluetooth0.4040.3130.717No0.4040.2190.623No0.3530.3440.697No0.3530.1890.542No0.9780.5101.488No0.9780.4781.456No0.8540.4031.257No0.8540.4901.344No0.9580.586N/A1.544No0.9580.3230.0801.361No0.9590.276N/A1.235No0.9590.4040.0311.394No0.9550.2851.240No0.9550.1961.151No0.0860.1170.203No0.08600.086No000No000No0.5960.2780.874No0.5960.3440.940NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.10. Sum of the SAR for W-CDMA Band II (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 159 of 193 W-CDMABand IIWi-FiDTS BandWi-FiUNII BandBluetooth0.5490.3130.862No0.5490.2190.768No0.5370.3440.881No0.5370.1890.726No1.1800.5101.690Yes1.1800.4781.658Yes0.4400.4030.843No0.4400.4900.930No1.0200.586N/A1.606Yes1.0200.3230.0801.423No0.9880.276N/A1.264No0.9880.4040.0311.423No00.2850.285No00.1960.196No0.5010.1170.618No0.50100.501No0.95300.953No0.95300.953No0.1080.2780.386No0.1080.3440.452NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotW-CDMA Band IIWi-FiDTS BandWi-FiUNII Band1.1800.5101.69088.90.025No11.1800.4781.65879.50.027No2Body-worn Accessory & HotspotRear1.0200.5861.606133.90.015No3FigureSPLSR ( 0.04)Worst-case combinationTestPositionRight Touch 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No)RF Exposure conditionsHead Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (1) d Wi-Fi DTS Band W-CDMA Band 2 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 160 of 193 Peak SARXYZmW/gmmmW-CDMA Band II1.870.068-0.252-0.174Wi-Fi DTS Band10.0292-0.332-0.175 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)88.9ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Figure (2) Issue Date: 8/15/2014 d Wi-Fi UNII Band W-CDMA Band 2 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 161 of 193 Peak SARXYZmW/gmmmW-CDMA Band II1.870.068-0.252-0.174Wi-Fi UNII Band5.250.0344-0.324-0.175 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)79.5ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (3) Wi-Fi DTS Band d W-CDMA Band 2 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 162 of 193 Peak SARXYZmW/gmmmW-CDMA Band II2.01-0.018-0.0668-0.184Wi-Fi DTS Band1.480.01560.0628-0.186 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)133.9ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.11. Sum of the SAR for CDMA BC0 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 163 of 193 CDMABC0Wi-FiDTS BandWi-FiUNII BandBluetooth0.6800.3130.993No0.6800.2190.899No0.4830.3440.827No0.4830.1890.672No0.5100.5101.020No0.5100.4780.988No0.3010.4030.704No0.3010.4900.791No0.3890.586N/A0.975No0.3890.3230.0800.792No0.3940.276N/A0.670No0.3940.4040.0310.829No0.2190.2850.504No0.2190.1960.415No0.3850.1170.502No0.38500.385No000No000No0.2360.2780.514No0.2360.3440.580NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.12. Sum of the SAR for CDMA BC0 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 164 of 193 CDMABC0Wi-FiDTS BandWi-FiUNII BandBluetooth0.3650.3130.678No0.3650.2190.584No0.2010.3440.545No0.2010.1890.390No0.3180.5100.828No0.3180.4780.796No0.1940.4030.597No0.1940.4900.684No0.5170.586N/A1.103No0.5170.3230.0800.920No0.5230.276N/A0.799No0.5230.4040.0310.958No00.2850.285No00.1960.196No0.4390.1170.556No0.43900.439No0.31800.318No0.31800.318No0.9400.2781.218No0.9400.3441.284NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.13. Sum of the SAR for CDMA BC1 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 165 of 193 CDMABC1Wi-FiDTS BandWi-FiUNII BandBluetooth0.3330.3130.646No0.3330.2190.552No0.2990.3440.643No0.2990.1890.488No0.9800.5101.490No0.9800.4781.458No0.7510.4031.154No0.7510.4901.241No0.9280.586N/A1.514No0.9280.3230.0801.331No0.9930.276N/A1.269No0.9930.4040.0311.428No0.9750.2851.260No0.9750.1961.171No0.0910.1170.208No0.09100.091No000No000No0.6400.2780.918No0.6400.3440.984NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.14. Sum of the SAR for CDMA BC1 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 166 of 193 CDMABC1Wi-FiDTS BandWi-FiUNII BandBluetooth0.5530.3130.866No0.5530.2190.772No0.5300.3440.874No0.5300.1890.719No1.1800.5101.690Yes1.1800.4781.658Yes0.5320.4030.935No0.5320.4901.022No0.9840.586N/A1.570No0.9840.3230.0801.387No0.7380.276N/A1.014No0.7380.4040.0311.173No00.2850.285No00.1960.196No0.4670.1170.584No0.46700.467No0.79700.797No0.79700.797No0.1100.2780.388No0.1100.3440.454NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotCDMABC1Wi-FiDTS BandWi-FiUNII Band1.1800.5101.69085.40.026No11.1800.4781.65876.10.028No2RF Exposure conditionsHeadFigureSPLSR ( 0.04)Worst-case combinationTestPositionRight Touch 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No) Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (1) d Wi-Fi DTS Band CDMA BC1 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 167 of 193 Peak SARXYZmW/gmmmCDMA BC11.760.059-0.252-0.176Wi-Fi DTS Band10.0292-0.332-0.175 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)85.4ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (2) d Wi-Fi UNII Band CDMA BC1 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 168 of 193 Peak SARXYZmW/gmmmCDMA BC11.760.059-0.252-0.176Wi-Fi UNII Band5.250.0344-0.324-0.175 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)76.1ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.15. Sum of the SAR for CDMA BC10 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 169 of 193 CDMABC10Wi-FiDTS BandWi-FiUNII BandBluetooth0.6450.3130.958No0.6450.2190.864No0.5190.3440.863No0.5190.1890.708No0.5820.5101.092No0.5820.4781.060No0.3960.4030.799No0.3960.4900.886No0.3230.586N/A0.909No0.3230.3230.0800.726No0.3450.276N/A0.621No0.3450.4040.0310.780No0.1390.2850.424No0.1390.1960.335No0.5200.1170.637No0.52000.520No000No000No0.1740.2780.452No0.1740.3440.518NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.16. Sum of the SAR for CDMA BC10 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 170 of 193 CDMABC10Wi-FiDTS BandWi-FiUNII BandBluetooth0.3950.3130.708No0.3950.2190.614No0.1820.3440.526No0.1820.1890.371No0.3300.5100.840No0.3300.4780.808No0.1930.4030.596No0.1930.4900.683No0.5470.586N/A1.133No0.5470.3230.0800.950No0.6160.276N/A0.892No0.6160.4040.0311.051No00.2850.285No00.1960.196No0.3080.1170.425No0.30800.308No0.37400.374No0.37400.374No0.6570.2780.935No0.6570.3441.001NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.17. Sum of the SAR for CDMA BC15 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 171 of 193 CDMABC15Wi-FiDTS BandWi-FiUNII BandBluetooth0.3500.3130.663No0.3500.2190.569No0.3930.3440.737No0.3930.1890.582No0.8840.5101.394No0.8840.4781.362No0.5960.4030.999No0.5960.4901.086No0.9690.586N/A1.555No0.9690.3230.0801.372No0.9970.276N/A1.273No0.9970.4040.0311.432No0.9830.2851.268No0.9830.1961.179No0.0250.1170.142No0.02500.025No000No000No0.5640.2780.842No0.5640.3440.908NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.18. Sum of the SAR for CDMA BC15 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 172 of 193 CDMABC15Wi-FiDTS BandWi-FiUNII BandBluetooth0.3410.3130.654No0.3410.2190.560No0.3430.3440.687No0.3430.1890.532No0.9300.5101.440No0.9300.4781.408No0.3720.4030.775No0.3720.4900.862No0.9170.586N/A1.503No0.9170.3230.0801.320No0.9210.276N/A1.197No0.9210.4040.0311.356No00.2850.285No00.1960.196No0.4650.1170.582No0.46500.465No1.02001.020No1.02001.020No0.0490.2780.327No0.0490.3440.393NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.19. Sum of the SAR for LTE Band 2 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 173 of 193 LTEBand 2Wi-FiDTS BandWi-FiUNII BandBluetooth0.3690.3130.682No0.3690.2190.588No0.3570.3440.701No0.3570.1890.546No0.9690.5101.479No0.9690.4781.447No0.7450.4031.148No0.7450.4901.235No0.9730.586N/A1.559No0.9730.3230.0801.376No0.8910.276N/A1.167No0.8910.4040.0311.326No0.9760.2851.261No0.9760.1961.172No0.0730.1170.190No0.07300.073No000No000No0.6220.2780.900No0.6220.3440.966NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.20. Sum of the SAR for LTE Band 2 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 174 of 193 LTEBand 2Wi-FiDTS BandWi-FiUNII BandBluetooth0.6180.3130.931No0.6180.2190.837No0.5500.3440.894No0.5500.1890.739No0.9750.5101.485No0.9750.4781.453No0.5490.4030.952No0.5490.4901.039No1.1400.586N/A1.726Yes1.1400.3230.0801.543No0.8770.276N/A1.153No0.8770.4040.0311.312No00.2850.285No00.1960.196No0.3690.1170.486No0.36900.369No0.65900.659No0.65900.659No0.1020.2780.380No0.1020.3440.446NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4LTEBand 2Wi-FiDTS BandWi-FiUNII BandBody-worn Accessory & HotspotRear1.1400.5861.726134.80.017No1FigureSPLSR ( 0.04)Worst-case combinationTestPosition 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No)RF Exposure conditions Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (1) Wi-Fi DTS Band d LTE Band 2 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 175 of 193 Peak SARXYZmW/gmmmLTE Band 22.37-0.015-0.0684-0.183Wi-Fi DTS Band1.480.01560.0628-0.186 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)134.8ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.21. Sum of the SAR for LTE Band 4 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 176 of 193 LTEBand 4Wi-FiDTS BandWi-FiUNII BandBluetooth0.3250.3130.638No0.3250.2190.544No0.3750.3440.719No0.3750.1890.564No0.9980.5101.508No0.9980.4781.476No0.6840.4031.087No0.6840.4901.174No0.9950.586N/A1.581No0.9950.3230.0801.398No0.9840.276N/A1.260No0.9840.4040.0311.419No0.9790.2851.264No0.9790.1961.175No0.0330.1170.150No0.03300.033No000No000No0.6670.2780.945No0.6670.3441.011NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.22. Sum of the SAR for LTE Band 4 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 177 of 193 LTEBand 4Wi-FiDTS BandWi-FiUNII BandBluetooth0.2520.3130.565No0.2520.2190.471No0.2200.3440.564No0.2200.1890.409No0.6450.5101.155No0.6450.4781.123No0.1940.4030.597No0.1940.4900.684No1.1000.586N/A1.686Yes1.1000.3230.0801.503No0.8290.276N/A1.105No0.8290.4040.0311.264No00.2850.285No00.1960.196No0.4230.1170.540No0.42300.423No0.89500.895No0.89500.895No0.0450.2780.323No0.0450.3440.389NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4LTEBand 4Wi-FiDTS BandWi-FiUNII BandBody-worn Accessory & HotspotRear1.1000.5861.686135.80.016No1 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No)RF Exposure conditionsFigureSPLSR ( 0.04)Worst-case combinationTestPosition Report No.: 14U17673-S1C Figure (1) Issue Date: 8/15/2014 Wi-Fi DTS Band d LTE Band 2 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 178 of 193 Peak SARXYZmW/gmmmLTE Band 42.18-0.0136-0.0698-0.184Wi-Fi DTS Band1.480.01560.0628-0.186 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)135.8ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.23. Sum of the SAR for LTE Band 5 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 179 of 193 LTEBand 5Wi-FiDTS BandWi-FiUNII BandBluetooth0.5920.3130.905No0.5920.2190.811No0.4850.3440.829No0.4850.1890.674No0.6120.5101.122No0.6120.4781.090No0.3260.4030.729No0.3260.4900.816No0.2430.586N/A0.829No0.2430.3230.0800.646No0.2360.276N/A0.512No0.2360.4040.0310.671No0.1340.2850.419No0.1340.1960.330No0.3420.1170.459No0.34200.342No000No000No0.2190.2780.497No0.2190.3440.563NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.24. Sum of the SAR for LTE Band 5 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 180 of 193 LTEBand 5Wi-FiDTS BandWi-FiUNII BandBluetooth0.2880.3130.601No0.2880.2190.507No0.1500.3440.494No0.1500.1890.339No0.2300.5100.740No0.2300.4780.708No0.1630.4030.566No0.1630.4900.653No0.3720.586N/A0.958No0.3720.3230.0800.775No0.4370.276N/A0.713No0.4370.4040.0310.872No00.2850.285No00.1960.196No0.2490.1170.366No0.24900.249No0.25800.258No0.25800.258No0.6380.2780.916No0.6380.3440.982NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.25. Sum of the SAR for LTE Band 13 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 181 of 193 LTEBand 13Wi-FiDTS BandWi-FiUNII BandBluetooth0.5430.3130.856No0.5430.2190.762No0.4070.3440.751No0.4070.1890.596No0.4820.5100.992No0.4820.4780.960No0.3780.4030.781No0.3780.4900.868No0.2510.586N/A0.837No0.2510.3230.0800.654No0.2520.276N/A0.528No0.2520.4040.0310.687No0.1700.2850.455No0.1700.1960.366No0.3840.1170.501No0.38400.384No000No000No0.2530.2780.531No0.2530.3440.597NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.26. Sum of the SAR for LTE Band 13 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 182 of 193 LTEBand 13Wi-FiDTS BandWi-FiUNII BandBluetooth0.3600.3130.673No0.3600.2190.579No0.2110.3440.555No0.2110.1890.400No0.2910.5100.801No0.2910.4780.769No0.2000.4030.603No0.2000.4900.690No0.5250.586N/A1.111No0.5250.3230.0800.928No0.5280.276N/A0.804No0.5280.4040.0310.963No00.2850.285No00.1960.196No0.3880.1170.505No0.38800.388No0.38600.386No0.38600.386No0.6960.2780.974No0.6960.3441.040NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.27. Sum of the SAR for LTE Band 17 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 183 of 193 LTEBand 17Wi-FiDTS BandWi-FiUNII BandBluetooth0.3940.3130.707No0.3940.2190.613No0.2510.3440.595No0.2510.1890.440No0.4710.5100.981No0.4710.4780.949No0.4730.4030.876No0.4730.4900.963No0.2050.586N/A0.791No0.2050.3230.0800.608No0.2540.276N/A0.530No0.2540.4040.0310.689No0.0750.2850.360No0.0750.1960.271No0.2720.1170.389No0.27200.272No000No000No0.2340.2780.512No0.2340.3440.578NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.28. Sum of the SAR for LTE Band 17 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 184 of 193 LTEBand 17Wi-FiDTS BandWi-FiUNII BandBluetooth0.1980.3130.511No0.1980.2190.417No0.1090.3440.453No0.1090.1890.298No0.1750.5100.685No0.1750.4780.653No0.1280.4030.531No0.1280.4900.618No0.3470.586N/A0.933No0.3470.3230.0800.750No0.3680.276N/A0.644No0.3680.4040.0310.803No00.2850.285No00.1960.196No0.2490.1170.366No0.24900.249No0.25700.257No0.25700.257No0.5160.2780.794No0.5160.3440.860NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.29. Sum of the SAR for LTE Band 25 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 185 of 193 LTEBand 25Wi-FiDTS BandWi-FiUNII BandBluetooth0.3920.3130.705No0.3920.2190.611No0.3670.3440.711No0.3670.1890.556No0.9700.5101.480No0.9700.4781.448No0.7470.4031.150No0.7470.4901.237No0.9730.586N/A1.559No0.9730.3230.0801.376No0.9710.276N/A1.247No0.9710.4040.0311.406No0.9520.2851.237No0.9520.1961.148No0.0610.1170.178No0.06100.061No000No000No0.4820.2780.760No0.4820.3440.826NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.30. Sum of the SAR for LTE Band 25 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 186 of 193 LTEBand 25Wi-FiDTS BandWi-FiUNII BandBluetooth0.6270.3130.940No0.6270.2190.846No0.5090.3440.853No0.5090.1890.698No0.9670.5101.477No0.9670.4781.445No0.4870.4030.890No0.4870.4900.977No1.0800.586N/A1.666Yes1.0800.3230.0801.483No0.8740.276N/A1.150No0.8740.4040.0311.309No00.2850.285No00.1960.196No0.4320.1170.549No0.43200.432No0.75700.757No0.75700.757No0.1030.2780.381No0.1030.3440.447NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotLTEBand 25Wi-FiDTS BandWi-FiUNII BandBody-worn Accessory & HotspotRear1.0800.5861.666133.20.016No1 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No)RF Exposure conditionsFigureSPLSR ( 0.04)Worst-case combinationTestPosition Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (1) Wi-Fi DTS Band d LTE Band 25 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 187 of 193 Peak SARXYZmW/gmmmLTE Band 252.2-0.015-0.0668-0.183Wi-Fi DTS Band1.480.01560.0628-0.186 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)133.2ModeThe Peak Location Separation Distance is computed by using the formula below:Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.31. Sum of the SAR for LTE Band 26 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 188 of 193 LTEBand 26Wi-FiDTS BandWi-FiUNII BandBluetooth0.4210.3130.734No0.4210.2190.640No0.3180.3440.662No0.3180.1890.507No0.4640.5100.974No0.4640.4780.942No0.2640.4030.667No0.2640.4900.754No0.1790.586N/A0.765No0.1790.3230.0800.582No0.2010.276N/A0.477No0.2010.4040.0310.636No0.0950.2850.380No0.0950.1960.291No0.2940.1170.411No0.29400.294No000No000No0.2020.2780.480No0.2020.3440.546NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & Hotspot Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.32. Sum of the SAR for LTE Band 26 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 189 of 193 LTEBand 26Wi-FiDTS BandWi-FiUNII BandBluetooth0.1590.3130.472No0.1590.2190.378No0.1010.3440.445No0.1010.1890.290No0.1340.5100.644No0.1340.4780.612No0.1020.4030.505No0.1020.4900.592No0.2270.586N/A0.813No0.2270.3230.0800.630No0.2100.276N/A0.486No0.2100.4040.0310.645No00.2850.285No00.1960.196No0.1700.1170.287No0.17000.170No0.12100.121No0.12100.121No0.4660.2780.744No0.4660.3440.810NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.33. Sum of the SAR for LTE Band 41 (UAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) As the Sum of the SAR is not greater than 1.6 W/kg SPLSR assessment is not required. Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 190 of 193 LTEBand 41Wi-FiDTS BandWi-FiUNII BandBluetooth0.3160.3130.629No0.3160.2190.535No0.3720.3440.716No0.3720.1890.561No0.7120.5101.222No0.7120.4781.190No0.4430.4030.846No0.4430.4900.933No0.9790.586N/A1.565No0.9790.3230.0801.382No0.5610.276N/A0.837No0.5610.4040.0310.996No0.2650.2850.550No0.2650.1960.461No0.1360.1170.253No0.13600.136No000No000No0.2650.2780.543No0.2650.3440.609NoSimultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4 Report No.: 14U17673-S1C Issue Date: 8/15/2014 13.34. Sum of the SAR for LTE Band 41 (LAT) + Wi-Fi DTS & UNII Band & BT SAR to Peak Location Separation Ratio (SPLSR) Conclusion:

Simultaneous transmission SAR measurement (Volume Scan) is not required because the either sum of the 1-g SAR is < 1.6 W/kg or the SPLSR is < 0.04 for all circumstances that require SPLSR calculation. UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 191 of 193 LTEBand 41Wi-FiDTS BandWi-FiUNII BandBluetooth0.2650.3130.578No0.2650.2190.484No0.0900.3440.434No0.0900.1890.279No0.5010.5101.011No0.5010.4780.979No0.1830.4030.586No0.1830.4900.673No1.1800.586N/A1.766Yes1.1800.3230.0801.583No0.3610.276N/A0.637No0.3610.4040.0310.796No00.2850.285No00.1960.196No0.3280.1170.445No0.32800.328No0.50900.509No0.50900.509No0.2690.2780.547No0.2690.3440.613NoHotspotRF Exposure conditionsRearFrontTestPositionLeft TouchRightTiltRightTouchLeft TiltEdge 1Edge 2Edge 3Edge 4Simultaneous Transmission ScenarioSPLSR(Yes/ No) 1-g SAR(mW/g)HeadBody-worn Accessory & HotspotLTEBand 41Wi-FiDTS BandWi-FiUNII BandBody-worn Accessory & HotspotRear1.1800.5861.766127.20.018No1 1-g SAR(mW/g)Calculated distance(mm) Volume Scan(Yes/ No)RF Exposure conditionsFigureSPLSR ( 0.04)Worst-case combinationTestPosition Report No.: 14U17673-S1C Issue Date: 8/15/2014 Figure (1) Wi-Fi DTS Band d LTE Band 41 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Page 192 of 193 Peak SARXYZmW/gmmmLTE Band 413.52-0.018-0.0598-0.182Wi-Fi DTS Band1.480.01560.0628-0.186 SQRT((X1-X2)^2+(Y1-Y2)^2+(Z1-Z2)^2)d: Calculated distance (mm)127.2ModeThe Peak Location Separation Distance is computed by using the formula below:Issue Date: 8/15/2014 Report No.: 14U17673-S1C 14. Appendixes Refer to separated files for the following appendixes. 14.1. Photos 14.2. System Performance Check Plots 14.3. Highest SAR Test Plots 14.4. Calibration Certificate for E-Field Probe EX3DV4 - SN 3885 14.5. Calibration Certificate for E-Field Probe EX3DV4 - SN 3751 14.6. Calibration Certificate for E-Field Probe EX3DV4 - SN 3749 14.7. Calibration Certificate for E-Field Probe EX3DV4 - SN 3901 14.8. Calibration Certificate for E-Field Probe EX3DV4 - SN 3772 14.9. Calibration Certificate for E-Field Probe EX3DV4 - SN 3686 14.10. Calibration Certificate for E-Field Probe EX3DV4 - SN 3989 14.11. Calibration Certificate for E-Field Probe EX3DV4 - SN 3990 14.12. Calibration Certificate for D750V3 - SN 1024 14.13. Calibration Certificate for D835V2 - SN 4d142 14.14. Calibration Certificate for D1750V2- SN 1050 14.15. Calibration Certificate for D1750V2- SN 1053 14.16. Calibration Certificate for D1900V2- SN 5d140 14.17. Calibration Certificate for D1900V2- SN 5d163 14.18. Calibration Certificate for D2450V2 - SN 748 14.19. Calibration Certificate for D2450V2 - SN 706 14.20. Calibration Certificate for D2600V2 - SN 1036 14.21. Calibration Certificate for D5GHzV2 - SN 1003 14.22. Calibration Certificate for D5GHzV2 - SN 1168 14.23. Tissue Material Ingredients UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. END OF REPORT Page 193 of 193

 

 

FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR Cellular Phone with Bluetooth and WLAN Radios MODEL NUMBER: A1549 FCC ID: BCG-E2816A IC: 579C-E2816A REPORT NUMBER: 14U17673-E2, REVISION C ISSUE DATE: AUGUST 02, 2014 Prepared for APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A Revision History Rev.

--

A B C Issue Date 7/17/14 7/23/14 7/29/14 08/02/14 Revisions Initial Issue Update Product Description Update: to referenced reports Address TCB Questions Revised By F. deAnda M. Hua F. de Anda T. Lee UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 2 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. CALIBRATION AND UNCERTAINTY ................................................................................ 5 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 5 4.2. SAMPLE CALCULATION ............................................................................................ 5 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT .............................................................................................. 7 5.2. MAXIMUM OUTPUT POWER...................................................................................... 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 7 5.4. SOFTWARE AND FIRMWARE .................................................................................... 7 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 7 5.6. DESCRIPTION OF TEST SETUP ................................................................................ 8 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................12 7. MEASUREMENT METHODS ............................................................................................13 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ...........................................13 8.1. ON TIME AND DUTY CYCLE RESULTS ....................................................................13 9. ANTENNA PORT TEST RESULTS ...................................................................................13 10. RADIATED TEST RESULTS .........................................................................................14 BASIC DATA RATE GFSK MODULATION .............................................................15 10.1. ENHANCED DATA RATE 8PSK MODULATION .....................................................25 10.2. 10.3. WORST-CASE ABOVE 18 GHz ..............................................................................35 10.4. WORST-CASE BELOW 1 GHz ...............................................................................36 11. AC POWER LINE CONDUCTED EMISSIONS ..............................................................38 SETUP PHOTOS ...........................................................................................................42 12. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 3 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 1. ATTESTATION OF TEST RESULTS COMPANY NAME:

APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. EUT DESCRIPTION:

MODEL:

SERIAL NUMBER:

DATE TESTED:

Cellular Phone with Bluetooth and WLAN Radios A1549 C39MQ0BVG332 APRIL 23, 2014 - JUNE 15, 2014 APPLICABLE STANDARDS STANDARD CFR 47 Part 15 Subpart C INDUSTRY CANADA RSS-210 Issue 8 Annex 8 INDUSTRY CANADA RSS-GEN Issue 3 TEST RESULTS Pass Pass Pass UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By:

Tested By:

FRANCISCO DE ANDA Project Lead UL Verification Services Inc. Oliver Su Senior Engineer UL Verification Services Inc. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 4 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.10-2009, FCC CFR 47 Part 2, FCC CFR 47 Part 15, RSS-GEN Issue 3, and RSS-210 Issue 8. Per FCC guidance, radiated tests are performed for A1549 to ensure that there is no deviation in EM fields between Model A1549 and Model A1586. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address. The following table identifies which facilities were utilized for radiated emission measurements documented in this report. Specific facilities are also identified in the test results sections. 47173 Benicia Street 47266 Benicia Street Chamber A Chamber B Chamber C Chamber D Chamber E Chamber F UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 4.2. SAMPLE CALCULATION Where relevant, the following sample calculation is provided:

Field Strength (dBuV/m) = Measured Voltage (dBuV) + Antenna Factor (dB/m) +

Cable Loss (dB) Preamp Gain (dB) 36.5 dBuV + 18.7 dB/m + 0.6 dB 26.9 dB = 28.9 dBuV/m UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 5 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 4.3. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus:

PARAMETER UNCERTAINTY Conducted Disturbance, 0.15 to 30 MHz Radiated Disturbance, 30 to 1000 MHz 3.52 dB 4.94 dB Uncertainty figures are valid to a confidence level of 95%. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 6 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 5. EQUIPMENT UNDER TEST 5.1. DESCRIPTION OF EUT Model A1549 is a mobile phone with multimedia functions (music, application support, and video), Cellular GSM/GPRS/EGPRS/CDMA2000/EVDO Rev.A/ EVDO Rev.B

/WCDMA/HSPA+/DC-HSDPA/LTE FDD & Carrier Aggregation radio, IEEE 802.11a/b/g/n/ac radio, Bluetooth radio and NFC. The rechargeable battery is not user accessible. 5.2. MAXIMUM OUTPUT POWER For Maximum output power, refer to Model A1586 BLUETOOTH report. 5.3. DESCRIPTION OF AVAILABLE ANTENNAS The radio utilizes a PiFA antenna, with a maximum gain of -.38dBi. 5.4. SOFTWARE AND FIRMWARE The test utility software used during testing was Bluetool 1.8.5 5.5. WORST-CASE CONFIGURATION AND MODE The worst-case mode and channel used for 30-1000 MHz radiated and power line conducted emissions was including headset, AC charger and the mode and channel with the highest output power. The EUT is a portable device that has three orientations; therefore X, Y and Z orientations have been investigated with AC adapter and Headset, and the worst case was found to be at X

(Flatbed) position without AC adapter and headset. Based on the manufacturers attestation that the nominal output power is reduced as the data rate increases, the data rates tested represent the highest power and worst-case with respect to EMC performance. Worst-case data rates were:

GFSK mode: DH1 8PSK mode: 3-DH5 There are three vendors of the WiFi/Bluetooth radio modules: variant 1, variant 2 and variant 3 and they have the same mechanical outline, same on board antenna, matching circuit, antenna structure and same specification. Baseline testing was performed on all three variants to determine the worst case on all conducted power and radiated emissions. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 7 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 5.6. DESCRIPTION OF TEST SETUP SUPPORT EQUIPMENT Support Equipment List Description AC/DC adapter Earphone Laptop Manufacturer Apple Apple Apple Model A1401 NA A1278 Serial Number 60812 NA C02HJ0A7DTY4 FCC ID NA NA NA I/O CABLES (RADIATED ABOVE 1 GHZ) I/O Cable List

# of identical ports Connector Type Cable Type Cable Length

(m) Remarks Port Cable No None used I/O CABLES (BELOW 1GHZ & AC LINE CONDUCTED TESTS) I/O Cable List Port Cable No

# of identical ports Connector Type Cable Type Cable Length (m) Remarks 1 2 3 AC DC Audio 1 1 1 US115 USB Jack Un-Shielded Un-Shielded Un-Shielded 80cm 1m 0.5m NA NA NA UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 8 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A TEST SETUP- CONDUCTED PORT The EUT was tested connected to a host Laptop via USB cable adapter and spectrum analyzer to antenna port. Test software exercised the EUT. SETUP DIAGRAM 1 EUT 2 Spectrum Analyser Laptop #1 AC Source UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 9 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A TEST SETUP- RADIATED-ABOVE 1 GHZ The EUT was tested battery powered. Test software exercised the EUT. DATE: AUGUST 02, 2014 IC: 579C-E2816A SETUP DIAGRAM EUT AC Source UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 10 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A TEST SETUP- BELOW 1GHZ & AC LINE CONDUCTED TESTS The EUT was tested with earphones connected and powered by AC adapter. Test software exercised the EUT. SETUP DIAGRAM EUT Earphones 3 2 AC Adapter 1 AC Source UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 11 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 6. TEST AND MEASUREMENT EQUIPMENT The following test and measurement equipment was utilized for the tests documented in this report:

Description Antenna, Horn, 18 GHz Antenna, Horn, 26.5 GHz Antenna, Horn, 40 GHz Peak / Average Power Sensor Peak Power Meter Spectrum Analyzer, 44 GHz Spectrum Analyzer, 40 GHz Antenna, Bilog, 2 GHz Preamplifier, 1300 MHz Preamplifier, 26.5 GHz Preamplifier, 40 GHz EMI Test Receiver, 9 kHz-7 LISN, 30 MHz TEST EQUIPMENT LIST Manufacturer ETS Lindgren ARA ARA Agilent / HP Agilent / HP Agilent / HP Agilent Sunol Sciences Sonoma Agilent / HP Model 3117 MWH-1826 MWH-2640 N1911A E9323A N9030A 8564E JB1 310 8449B Miteq R & S FCC NSP4000-SP2 ESCI 7 LISN-50/250-25-2 Asset F00131 C00589 C00981 F00153 F00025 F00129 C00951 F00168 F00008 F00165 C00990 F00092 C00626 Cal Due 02/18/15 11/26/14 07/15/15 03/06/15 04/30/15 02/22/15 07/29/14 03/28/15 05/27/15 03/25/15 08/20/14 09/05/14 01/14/15 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 12 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 7. MEASUREMENT METHODS 6 dB BW: KDB 558074 D01. Output Power: KDB 558074 D01. Power Spectral Density: KDB 558074 D01. Out-of-band emissions in non-restricted bands: KDB 558074 D01. Out-of-band emissions in restricted bands: KDB 558074 D01. 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS LIMITS None; for reporting purposes only. TEST PROCEDURE KDB 789033 Zero-Span Spectrum Analyzer Method. 8.1. ON TIME AND DUTY CYCLE RESULTS For on time and duty cycle data, refer to Model A1586 BLUETOOTH report. 9. ANTENNA PORT TEST RESULTS For antenna port data, refer to Model A1586 BLUETOOTH report. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 13 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 IC: 579C-E2816A REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A 10. RADIATED TEST RESULTS LIMITS AND PROCEDURE FCC 15.205 and 15.209 IC RSS-210 Clause 2.6 (Transmitter) IC RSS-GEN Clause 6 (Receiver) Frequency Range

(MHz) 30 - 88 88 - 216 216 - 960 Above 960 Field Strength Limit

(uV/m) at 3 m Field Strength Limit

(dBuV/m) at 3 m 100 150 200 500 40 43.5 46 54 TEST PROCEDURE The EUT is placed on a non-conducting table 80 cm above the ground plane. The antenna to EUT distance is 3 meters. The EUT is configured in accordance with ANSI C63.4. The EUT is set to transmit in a continuous mode. For measurements below 1 GHz the resolution bandwidth is set to 100 kHz for peak detection measurements or 120 kHz for quasi-peak detection measurements. Peak detection is used unless otherwise noted as quasi-peak. For measurements above 1 GHz the resolution bandwidth is set to 1 MHz, then the video bandwidth is set to 1 MHz for peak measurements and 10 Hz for average measurements. The spectrum from 30 MHz to 26 GHz is investigated with the transmitter set to the lowest, middle, and highest channels in the 2.4 GHz band. The frequency range of interest is monitored at a fixed antenna height and EUT azimuth. The EUT is rotated through 360 degrees to maximize emissions received. The antenna is scanned from 1 to 4 meters above the ground plane to further maximize the emission. Measurements are made with the antenna polarized in both the vertical and the horizontal positions. Per FCC guidance, radiated tests are performed to ensure there is no deviation in EM fields between Model A1549 and Model A1586. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 14 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 10.1. BASIC DATA RATE GFSK MODULATION RESTRICTED BANDEDGE (LOW CHANNEL, HORIZONTAL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 15 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RESTRICTED BANDEDGE (LOW CHANNEL, VERTICAL) LOW CHANNEL RESTRICTED, PEAK, VERT LOW CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 16 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, HORIZONTAL) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 17 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, VERTICAL) HIGH CHANNEL RESTRICTED, PEAK, VERT HIGH CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 18 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A LOW CHANNEL HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT LOW CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 19 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A DATA Marker Frequency

(GHz) 1.906 1.906 1.974 1.974 2.612 2.612 2.922 2.923 5.775 5.777 6.919 6.92 4 1 2 5 3 6 Meter Reading

(dBuV) 43.78 30.84 43.35 30.71 43.42 30.68 43.7 30.69 40.85 27.96 40.17 27.11 Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T 31.1 31.1 31.3 31.3 32.6 32.6 32.6 32.6 34.9 34.9 35.9 35.9

-25.3

-25.3

-25.2

-25.2

-24.2

-24.2

-24

-23.9

-29.3

-29.3

-28

-28 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 Reading

(dBuV/m) 49.58 37.74 49.45 37.91 51.82 40.18 52.3 40.49 46.45 34.66 48.07 36.11

(dBuV/m)

(dB)

(dBuV/m)

(dB)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Azimuth

(Degs) Height

(cm) Polarity 360 360 360 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 101 101 101 V V H H H H V V H H V V Note: All the frequencies in the above table are located in the non-restricted bands.

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 20 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A MID CHANNEL HARMONICS AND SPURIOUS EMISSIONS MID CHANNEL HORIZONTAL PLOT MID CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 21 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A DATA Marker Frequency

(GHz)

* 1.325

* 1.325

* 1.31

* 1.31

* 4.69

* 4.69

* 4.703

* 4.704 1.975 1.976

* 1.325

* 1.325 1 3 5 6 4 2 Meter Reading

(dBuV) 44.14 31.26 44.25 31.33 41.47 28.55 41.27 28.64 44.32 30.67 44.14 31.26 Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity

(dB/m)

/Pad (dB) PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T 29 29 29 29 34.2 34.2 34.2 34.2 31.3 31.3 29 29

-26.8

-26.8

-26.9

-26.9

-30.1

-30.1

-30.4

-30.4

-25.2

-25.1

-26.8

-26.8 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 Reading

(dBuV/m) 46.34 34.56 46.35 34.53 45.57 33.75 45.07 33.54 50.42 37.97 46.34 34.56

-

54

-

54

-

54

-

54

-

-

-

54

-

-19.44

-

-19.47

-

-20.25

-

-20.46

-

-

-

-19.44 74

-

74

-

74

-

74

-

-

-

74

-

-27.66

-

-27.65

-

-28.43

-

-28.93

-

-

-

-27.66

-

360 360 360 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 101 101 101 H H V V H H V V H H H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 22 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A HIGH CHANNEL HARMONICS AND SPURIOUS HIGH CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC: 579C-E2816A HIGH CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 23 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Marker Frequency

(GHz)

* 1.568

* 1.569

* 2.348

* 2.348

* 1.477

* 1.476

* 2.332

* 2.33

* 4.754

* 4.755 Meter Reading

(dBuV) 44.16 31.12 43.54 30.75 44.04 31.18 43.52 30.86 42.41 29.39

* 4.693 41.3

* 4.694 28.57 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3

(dB/m)

/Pad (dB) 28.4 28.4 31.7 31.7 28.5 28.5 31.6 31.6 34.1 34.1 34.2 34.2

-26.4

-26.4

-24.7

-24.7

-26.4

-26.4

-24.9

-24.9

-30.9

-30.9

-30.2

-30.2 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 Reading

(dBuV/m) 46.16 34.22 50.54 38.85 46.14 34.38 50.22 38.66 45.61 33.69 45.3 33.67 1 2 3 4 5 6

-

54

-

54

-

54

-

54

-

54

-

54

-

-19.78

-

-15.15

-

-19.62

-

-15.34

-

-20.31

-

-20.33 74

-

74

-

74

-

74

-

74

-

74

-

-27.84

-

-23.46

-

-27.86

-

-23.78

-

-28.39

-

-28.7

-

360 360 360 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 101 101 101 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 24 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 10.2. ENHANCED DATA RATE 8PSK MODULATION RESTRICTED BANDEDGE (LOW CHANNEL, HORIZONTAL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 25 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RESTRICTED BANDEDGE (LOW CHANNEL, VERTICAL) LOW CHANNEL RESTRICTED, PEAK, VERT LOW CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 26 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, HORIZONTAL) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 27 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, VERTICAL) HIGH CHANNEL RESTRICTED, PEAK, VERT HIGH CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 28 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A LOW CHANNEL HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT LOW CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 29 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A DATA Marker Frequency

(GHz)

* 1.493

* 1.493

* 1.573

* 1.573

* 3.84 Meter Reading

(dBuV) 44.08 31.09 44.04 31.09 42.57 PK3 VB1T PK3 VB1T PK3

* 3.841 29.7 VB1T

* 9.033

* 9.031

* 3.736

* 3.737

* 7.663 38.14 24.64 41.88 28.9 39.6 PK3 VB1T PK3 VB1T PK3

* 7.663 25.98 VB1T 1 2 3 4 5 6 Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity

(dB/m)

/Pad (dB) 28.4 28.4 28.4 28.4 33.5 33.5 36.3 36.3 33.4 33.4 35.8 35.8

-26.2

-26.2

-26.4

-26.4

-31.4

-31.4

-24.7

-24.7

-30.8

-30.8

-26.6

-26.6 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 Reading

(dBuV/m) 46.28 34.39 46.04 34.19 44.67 32.9 49.74 37.34 44.48 32.6 48.8 36.28

-

54

-

54

-

54

-

54

-

54

-

54

-

-19.61

-

-19.81

-

-21.1

-

-16.66

-

-21.4

-

-17.72 74

-

74

-

74

-

74

-

74

-

74

-

-27.72

-

-27.96

-

-29.33

-

-24.26

-

-29.52

-

-25.2

-

360 360 360 360 360 360 360 360 360 360 360 360 120 120 120 120 145 145 145 145 180 180 180 180 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK Peak detector UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 30 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A MID CHANNEL HARMONICS AND SPURIOUS EMISSIONS MID CHANNEL HORIZONTAL PLOT MID CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 31 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A DATA Marker Frequency

(GHz)

* 1.598

* 1.597

* 1.478

* 1.479

* 4.332

* 4.332

* 8.249

* 8.247

* 4.743

* 4.743

* 8.387

* 8.388 1 2 3 4 5 6 Meter Reading

(dBuV) 44.4 31.06 44.58 31.15 42.19 28.83 39.53 26.02 41.88 29.27 38.99 25.49 Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity

(dB/m)

/Pad (dB) PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T 28.4 28.4 28.4 28.4 33.6 33.6 35.9 35.9 34.1 34.1 35.9 35.9

-26.4

-26.4

-26.3

-26.3

-30.5

-30.5

-26.7

-26.7

-30.8

-30.8

-26.3

-26.3 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 Reading

(dBuV/m) 46.4 34.16 46.68 34.35 45.29 33.03 48.73 36.32 45.18 33.67 48.59 36.19

-

54

-

54

-

54

-

54

-

54

-

54

-

-19.84

-

-19.65

-

-20.97

-

-17.68

-

-20.33

-

-17.81 74

-

74

-

74

-

74

-

74

-

74

-

-27.6

-

-27.32

-

-28.71

-

-25.27

-

-28.82

-

-25.41

-

360 360 360 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 101 101 101 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK Peak detector UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 32 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A HIGH CHANNEL HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT HIGH CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 33 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A DATA Marker Frequency Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin Azimuth

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(Degs) Height

(cm) Polarity

(GHz)

* 1.594

* 1.593

* 1.435 Meter Reading

(dBuV) 44.13 31.08 43.77 PK3 VB1T PK3

* 1.436 31.1 VB1T

* 4.754

* 4.753

* 7.694

* 7.694

* 4.962

* 4.964

* 7.661

* 7.663 42.63 29.52 38.55 25.61 41.54 28.46 38.82 25.98 PK3 VB1T PK3 VB1T PK3 VB1T PK3 VB1T 1 2 3 4 5 6

(dB/m)

/Pad (dB) 28.4 28.4 28.7 28.7 34.1 34.1 35.9 35.9 34.1 34.1 35.8 35.8

-26.4

-26.4

-26.3

-26.3

-30.9

-30.9

-26.5

-26.5

-30.2

-30.2

-26.6

-26.6 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 Reading

(dBuV/m) 46.13 34.18 46.17 34.6 45.83 33.82 47.95 36.11 45.44 33.46 48.02 36.28

-

54

-

54

-

54

-

54

-

54

-

54

-

-19.82

-

-19.4

-

-20.18

-

-17.89

-

-20.54

-

-17.72 74

-

74

-

74

-

74

-

74

-

74

-

-27.87

-

-27.83

-

-28.17

-

-26.05

-

-28.56

-

-25.98

-

360 360 360 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 101 101 101 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 34 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 10.3. WORST-CASE ABOVE 18 GHz SPURIOUS EMISSIONS 18 TO 26 GHz (WORST-CASE CONFIGURATION 2.4GHz PLOT Note: GFSK, highest power mode used for test. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 35 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 10.4. WORST-CASE BELOW 1 GHz SPURIOUS EMISSIONS 30 TO 1000 MHz (WORST-CASE CONFIGURATION) HORIZONTAL PLOT VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 36 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 IC: 579C-E2816A Marker Frequency Meter Det Hybrid Amp/Cbl (dB) Corrected QPk Limit Margin Azimuth Height Polarity

(MHz)

* 171.0575

* 333.5 30.255 46.6175 68.42 68.505 712.4 Reading

(dBuV) 38.01 32.91 37.01 41.88 43.12 48.21 42.14 2 6 3 4 5 1 7 PK PK PK PK PK PK PK 11.7 14 21.3 9.5 8.1 8.1 20.3 Reading

(dBuV/m)

(dB)

(Degs)

(cm)

-30.9

-30.1

-31.8

-31.7

-31.5

-31.5

-29.2

(dBuV/m) 18.81 16.81 26.51 19.68 19.72 24.81 33.24 43.52 46.02 40 40 40 40 46.02

-24.71

-29.21

-13.49

-20.32

-20.28

-15.19

-12.78 0-360 0-360 0-360 0-360 0-360 0-360 0-360 98 100 100 100 100 201 100 H H V V V H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector Note: GFSK, highest power mode used for test. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 37 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A 11. AC POWER LINE CONDUCTED EMISSIONS LIMITS FCC 15.207 (a) RSS-Gen 7.2.2 TEST PROCEDURE The EUT is placed on a non-conducting table 40 cm from the vertical ground plane and 80 cm above the horizontal ground plane. The EUT is configured in accordance with ANSI C63.4. The receiver is set to a resolution bandwidth of 9 kHz. Peak detection is used unless otherwise noted as quasi-peak or average. Line conducted data is recorded for both NEUTRAL and HOT lines. RESULTS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 38 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A 6 WORST EMISSIONS Line-L1 .15 - 30MHz Trace Markers DATE: AUGUST 02, 2014 IC: 579C-E2816A Marker Frequency Meter Reading Det T24 IL L1 LC Cables 1&3 Corrected CISPR 22 Class Margin to CISPR 22 Class Margin to

(MHz)

(dBuV)

(dB)

(dB) Reading B QP Limit (dB) B Avg Limit (dB) dBuV 40.14 65.3

-25.16

-

-

18.17 33.05 19.18 42.09 26.29 30.93 21.26

-

56

-

56

-

56

-

-

55.3

-37.13

-22.95

-

-13.91

-

-25.07

-

-

46

-

46

-

46

-

-26.82

-

-19.71

-

-24.74 0 0 0 0 0 0

.1

.1 1 2 3 4 5 6 7 8

.1635 38.94 PK 1.2

.1635 16.97 Av 1.2

.582

.582

.762

.762 32.75 18.88 41.79 25.99 4.3395 30.63 4.3395 20.96 PK Av PK Av PK Av

.3

.3

.3

.3

.2

.2 Line-L2 .15 - 30MHz Trace Markers Marker Frequency Meter Reading Det T24 IL L2 LC Cables 2&3 Corrected CISPR 22 Class Margin to CISPR 22 Class Margin to

(MHz)

(dBuV)

(dB)

(dB) Reading B QP Limit (dB) B Avg Limit (dB) dBuV

.1635 38.93 PK 1.3

.1635 17.97 Av 1.3

.77325 40.52

.77325 25.7 4.299 29.72 4.299 20 PK Av PK Av

.3

.3

.2

.2 0 0 0 0

.1

.1 40.23 65.3

-25.07

-

-

19.27 40.82 26 30.02 20.3

-

56

-

56

-

-

55.3

-36.03

-15.18

-

-25.98

-

-

46

-

46

-

-20

-

-25.7 9 10 11 12 13 14 PK - Peak detector Av - average detection UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 39 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A LINE 1 RESULTS DATE: AUGUST 02, 2014 IC: 579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 40 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A LINE 2 RESULTS DATE: AUGUST 02, 2014 IC: 579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 41 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

 

 

REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A 12. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO DATE: AUGUST 02, 2014 IC: 579C-E2816A RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS PHOTO UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 42 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A Y-AXIS PHOTO DATE: AUGUST 02, 2014 IC: 579C-E2816A Z-AXIS PHOTO UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 43 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) RADIATED FRONT PHOTO (BELOW 1 GHz) RADIATED BACK PHOTO (BELOW 1 GHz) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 44 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E2C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO END OF REPORT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 45 of 45 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

 

 

FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR Cellular Phone with Bluetooth and WLAN Radios MODEL NUMBER: A1586 FCC ID: BCG-E2816A IC: 579C-E2816A REPORT NUMBER: 14U17673-E1 Revision C ISSUE DATE: AUGUST 02, 2014 Prepared for APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A Revision History DATE: AUGUST 02, 2014 IC:579C-E2816A Rev.

--

A B C Issue Date 7/21/14 7/23/14 7/29/14 08/02/14 Revisions Initial Issue EUT Description Updated Update to referenced reports Address TCB Questions Revised By F. de Anda H.Lau F. de Anda T. Lee UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 2 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A TABLE OF CONTENTS DATE: AUGUST 02, 2014 IC:579C-E2816A 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6 4.2. SAMPLE CALCULATION ............................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 7 5. EQUIPMENT UNDER TEST ............................................................................................... 8 5.1. DESCRIPTION OF EUT .............................................................................................. 8 5.2. MAXIMUM OUTPUT POWER...................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 8 5.4. SOFTWARE AND FIRMWARE .................................................................................... 8 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 9 5.6. DESCRIPTION OF TEST SETUP ...............................................................................10 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................14 7. MEASUREMENT METHODS ............................................................................................15 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ...........................................16 8.1. ON TIME AND DUTY CYCLE RESULTS ....................................................................16 8.1.1. DUTY CYCLE PLOTS .........................................................................................17 8.1.2. DUTY CYCLE PLOTS .........................................................................................17 9. ANTENNA PORT TEST RESULTS ...................................................................................18 9.1. BASIC DATA RATE GFSK MODULATION .................................................................18 9.1.1. 20 dB AND 99% BANDWIDTH ............................................................................18 9.1.2. HOPPING FREQUENCY SEPARATION .............................................................21 9.1.3. NUMBER OF HOPPING CHANNELS ..................................................................23 9.1.4. AVERAGE TIME OF OCCUPANCY ....................................................................26 9.1.5. OUTPUT POWER ...............................................................................................30 9.1.6. AVERAGE POWER .............................................................................................33 9.1.7. CONDUCTED SPURIOUS EMISSIONS ..............................................................34 9.2. ENHANCED DATA RATE 8PSK MODULATION ........................................................39 9.2.1. 20 dB AND 99% BANDWIDTH ............................................................................39 9.2.2. HOPPING FREQUENCY SEPARATION .............................................................42 9.2.3. NUMBER OF HOPPING CHANNELS ..................................................................44 9.2.4. AVERAGE TIME OF OCCUPANCY ....................................................................47 9.2.5. OUTPUT POWER ...............................................................................................51 9.2.6. AVERAGE POWER .............................................................................................54 9.2.7. CONDUCTED SPURIOUS EMISSIONS ..............................................................55 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 3 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 10.1. 10.2. DATE: AUGUST 02, 2014 IC:579C-E2816A REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 10. RADIATED TEST RESULTS .........................................................................................60 LIMITS AND PROCEDURE .....................................................................................60 TRANSMITTER ABOVE 1GHz ................................................................................61 BASIC DATA RATE GFSK MODULATION ......................................................61 ENHANCED DATA RATE 8PSK MODULATION ..............................................71 10.3. WORST-CASE ABOVE 18 GHz ..............................................................................81 10.4. WORST-CASE BELOW 1 GHz ...............................................................................82 10.2.1. 10.2.2. 11. AC POWER LINE CONDUCTED EMISSIONS ..............................................................84 SETUP PHOTOS ...........................................................................................................88 12. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 4 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 1. ATTESTATION OF TEST RESULTS COMPANY NAME:

APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. EUT DESCRIPTION:

MODEL:

SERIAL NUMBER:

DATE TESTED:

Cellular Phone with Bluetooth and WLAN Radios A1586 C39MF01KFY6W - Conducted, C39MD06FFY70 - Radiated APRIL 10-JULY 21, 2014 APPLICABLE STANDARDS STANDARD CFR 47 Part 15 Subpart C INDUSTRY CANADA RSS-210 Issue 8 Annex 8 INDUSTRY CANADA RSS-GEN Issue 3 TEST RESULTS Pass Pass Pass UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By:

Tested By:

FRANCISCO DE ANDA Project Lead UL Verification Services Inc. Oliver Su Senior Engineer UL Verification Services Inc. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 5 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.10-2009, FCC CFR 47 Part 2, FCC CFR 47 Part 15, RSS-GEN Issue 3, and RSS-210 Issue 8. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address. The following table identifies which facilities were utilized for radiated emission measurements documented in this report. Specific facilities are also identified in the test results sections. 47173 Benicia Street 47266 Benicia Street Chamber A Chamber B Chamber C Chamber D Chamber E Chamber F Chamber G Chamber H UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 4.2. SAMPLE CALCULATION Where relevant, the following sample calculation is provided:

Field Strength (dBuV/m) = Measured Voltage (dBuV) + Antenna Factor (dB/m) +

Cable Loss (dB) Preamp Gain (dB) 36.5 dBuV + 18.7 dB/m + 0.6 dB 26.9 dB = 28.9 dBuV/m UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 6 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 4.3. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus:

PARAMETER UNCERTAINTY Conducted Disturbance, 0.15 to 30 MHz Radiated Disturbance, 30 to 1000 MHz 3.52 dB 4.94 dB Uncertainty figures are valid to a confidence level of 95%. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 7 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 5. EQUIPMENT UNDER TEST 5.1. DESCRIPTION OF EUT Model A1586 is a mobile phone with multimedia functions (music, application support, and video), Cellular GSM/GPRS/EGPRS/CDMA2000/EVDO Rev.A/ EVDO Rev.B/WCDMA/HSPA+/DC-HSDPA/LTE FDD & Carrier Aggregation/TDD/TD-SCDMA radio, IEEE 802.11a/b/g/n/ac radio, Bluetooth radio and NFC. The rechargeable battery is not user accessible. 5.2. MAXIMUM OUTPUT POWER The transmitter has a maximum peak conducted output power as follows:

Frequency Range Mode Output Power Output Power

(MHz) 2402 - 2480 2402 - 2480 Basic GFSK Enhanced 8PSK

(dBm) 11.86 11.33

(mW) 15.35 13.58 5.3. DESCRIPTION OF AVAILABLE ANTENNAS The radio utilizes a PiFA antenna, with a maximum gain of -.38dBi. 5.4. SOFTWARE AND FIRMWARE The test utility software used during testing was Bluetool 1.8.5 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 8 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 5.5. WORST-CASE CONFIGURATION AND MODE DATE: AUGUST 02, 2014 IC:579C-E2816A The worst-case mode and channel used for 30-1000 MHz radiated and power line conducted emissions was including headset, AC charger and the mode and channel with the highest output power. The EUT is a portable device that has three orientations; therefore X, Y and Z orientations have been investigated with AC adapter and Headset. The worst case was found to be at X (Flatbed) position without AC adapter and headset (for above 1GHz). Based on the manufacturers attestation that the nominal output power is reduced as the data rate increases, the data rates tested represent the highest power and worst-case with respect to EMC performance. Worst-case data rates were:

GFSK mode: DH1 8PSK mode: 3-DH5 There are three vendors of the WiFi/Bluetooth radio modules: variant 1, variant 2 and variant 3 and they have the same mechanical outline, same on board antenna, matching circuit, antenna structure and same specification. Baseline testing was performed on all three variants to determine the worst case on all conducted power and radiated emissions. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 9 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 5.6. DESCRIPTION OF TEST SETUP SUPPORT EQUIPMENT Description Manufacturer Model Support Equipment List AC/DC adapter Earphone Laptop Apple Apple Apple I/O CABLES (CONDUCTED TEST) A1401 NA A1278 I/O Cable List Serial Number 60812 FCC ID NA NA C02HJ0A7DTY4 NA NA Port Cable No

# of identical ports Connector Type Cable Type Cable Length (m) Remarks 1 2 Antenna USB 1 1 SMA USB Un-Shielded Shielded 0.1 1m to spectrum Analyzer To EUT I/O CABLES (RADIATED ABOVE 1 GHZ) I/O Cable List

# of identical ports Connector Type Cable Type Cable Length (m) Remarks Port Cable No None used I/O CABLES (BELOW 1GHZ & AC LINE CONDUCTED TESTS) I/O Cable List Port Cable No

# of identical ports Connector Type Cable Type Cable Length (m) Remarks 1 2 3 AC DC Audio 1 1 1 US115 USB Jack Un-Shielded Un-Shielded Un-Shielded 80cm 1m 0.5m NA NA NA UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 10 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A TEST SETUP- CONDUCTED PORT The EUT was tested connected to a host Laptop via USB cable adapter and spectrum analyzer to antenna port. Test software exercised the EUT. DATE: AUGUST 02, 2014 IC:579C-E2816A SETUP DIAGRAM 1 EUT 2 Spectrum Analyser Laptop #1 AC Source UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 11 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A TEST SETUP- RADIATED-ABOVE 1 GHZ The EUT was tested battery powered. Test software exercised the EUT. DATE: AUGUST 02, 2014 IC:579C-E2816A SETUP DIAGRAM EUT AC Source UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 12 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A TEST SETUP- BELOW 1GHZ & AC LINE CONDUCTED TESTS The EUT was tested with earphones connected and powered by AC adapter. Test software exercised the EUT. DATE: AUGUST 02, 2014 IC:579C-E2816A SETUP DIAGRAM EUT Earphones 3 2 AC Adapter 1 AC Source UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 13 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 6. TEST AND MEASUREMENT EQUIPMENT The following test and measurement equipment was utilized for the tests documented in this report:

TEST EQUIPMENT LIST Description Antenna, Horn, 18 GHz Antenna, Horn, 26.5 GHz Antenna, Horn, 40 GHz Peak / Average Power Sensor Wideband Power Sensor Peak Power Meter Spectrum Analyzer, 44 GHz Spectrum Analyzer, 40 GHz Antenna, Bilog, 2 GHz Preamplifier, 1300 MHz Preamplifier, 26.5 GHz Manufacturer ETS Lindgren ARA ARA Agilent / HP Agilent Agilent / HP Agilent / HP Agilent Sunol Sciences Sonoma Agilent / HP Model 3117 MWH-1826/B MWH-2640 N1911A N1921A E9323A N9030A 8564E JB1 310 8449B Asset F00131 C00589 C00981 F00153 F00361 F00025 F00129 C00951 F00168 F00008 F00165 Cal Due 02/18/15 11/26/14 07/15/15 03/06/15 10/02/14 04/03/15 02/22/15 07/29/14 03/28/15 05/27/15 03/25/15 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 14 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 7. MEASUREMENT METHODS 6 dB BW: KDB 558074 D01. Output Power: KDB 558074 D01. Power Spectral Density: KDB 558074 D01. Out-of-band emissions in non-restricted bands: KDB 558074 D01. Out-of-band emissions in restricted bands: KDB 558074 D01. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 15 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS LIMITS None; for reporting purposes only. PROCEDURE KDB 789033 Zero-Span Spectrum Analyzer Method. 8.1. ON TIME AND DUTY CYCLE RESULTS Mode ON Time Period Duty Cycle B

(msec) 2.890

(msec) 3.750 x

(linear) 0.771 2.890 3.750 0.771 GFSK 8PSK Duty Cycle

(%) 77.1%

77.1%

Duty Cycle 1/B Correction FactorMinimum VBW

(dB) 1.131 1.131

(kHz) 0.346 0.346 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 16 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 8.1.1. DUTY CYCLE PLOTS DATE: AUGUST 02, 2014 IC:579C-E2816A DUTY CYCLE BLE MODE GFSK 8.1.2. DUTY CYCLE PLOTS DUTY CYCLE BLE MODE 8PSK UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 17 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9. ANTENNA PORT TEST RESULTS 9.1. BASIC DATA RATE GFSK MODULATION 9.1.1. 20 dB AND 99% BANDWIDTH DATE: AUGUST 02, 2014 IC:579C-E2816A LIMIT None; for reporting purposes only. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The RBW is set to 1% of the 20 dB bandwidth. The VBW is set to RBW. The sweep time is coupled. RESULTS Channel Low Middle High Frequency 20 dB Bandwidth 99% Bandwidth

(MHz) 2402 2441 2480

(kHz) 929.5 952.7 1049.0

(kHz) 907.38 910.51 922.16 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 18 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 20 dB AND 99% BANDWIDTH BANDWIDTH LOW CH DATE: AUGUST 02, 2014 IC:579C-E2816A BANDWIDTH MID CH UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 19 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A BANDWIDTH HIGH CH DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 20 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.1.2. HOPPING FREQUENCY SEPARATION LIMIT FCC 15.247 (a) (1) IC RSS-210 A8.1 (b) Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hoping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The RBW is set to 100 kHz and the VBW is set to 100 kHz. The sweep time is coupled. RESULTS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 21 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A HOPPING FREQUENCY SEPARATION HOPPING FREQUENCY SEPARATION DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 22 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.1.3. NUMBER OF HOPPING CHANNELS LIMIT FCC 15.247 (a) (1) (iii) IC RSS-210 A8.1 (d) Frequency hopping systems in the 2400 2483.5 MHz band shall use at least 15 non-

overlapping channels. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The span is set to cover the entire authorized band, in either a single sweep or in multiple contiguous sweeps. The RBW is set to a maximum of 1 % of the span. The analyzer is set to Max Hold. RESULTS Normal Mode: 79 Channels observed. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 23 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A NUMBER OF HOPPING CHANNELS NUMBER OF HOPPING CHANNELS (100 MHZ SPAN) DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF HOPPING CHANNELS (30 MHZ SPAN, FIRST SEGMENT) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 24 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF HOPPING CHANNELS (30 MHZ SPAN, SECOND SEGMENT) NUMBER OF HOPPING CHANNELS (30 MHZ SPAN, THIRD SEGMENT) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 25 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9.1.4. AVERAGE TIME OF OCCUPANCY DATE: AUGUST 02, 2014 IC:579C-E2816A LIMIT FCC 15.247 (a) (1) (iii) IC RSS-210 A8.1 (d) The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The span is set to 0 Hz, centered on a single, selected hopping channel. The width of a single pulse is measured in a fast scan. The number of pulses is measured in a 3.16 second scan, to enable resolution of each occurrence. The average time of occupancy in the specified 31.6 second period (79 channels * 0.4 s) is equal to 10 * (# of pulses in 3.16 s) * pulse width. RESULTS DH Packet Pulse Width

(msec) GFSK Normal Mode 0.414 1.674 2.91 DH1 DH3 DH5 Number of Pulses in Average Time of Occupancy Limit Margin 3.16 seconds 32 19 11

(sec)

(sec)

(sec) 0.132 0.318 0.320 0.4 0.4 0.4

-0.268

-0.082

-0.080 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 26 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PULSE WIDTH - DH1 PULSE WIDTH DH1 DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF PULSES IN 3.16 SECOND OBSERVATION PERIOD DH1 NUMBER OF PULSES DH1 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 27 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PULSE WIDTH DH3 PULSE WIDTH DH3 DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF PULSES IN 3.16 SECOND OBSERVATION PERIOD DH3 NUMBER OF PULSES DH3 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 28 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PULSE WIDTH DH5 PULSE WIDTH DH5 DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF PULSES IN 3.16 SECOND OBSERVATION PERIOD DH5 NUMBER OF PULSES DH5 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 29 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9.1.5. OUTPUT POWER DATE: AUGUST 02, 2014 IC:579C-E2816A LIMIT 15.247 (b) (1) RSS-210 Issue 7 Clause A8.4 The maximum antenna gain is less than 6 dBi, therefore the limit is 30 dBm. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer the analyzer bandwidth is set to a value greater than the 20 dB bandwidth of the EUT. RESULTS Channel Frequency Output Power

(MHz) 2402 2441 2480

(dBm) 10.25 11.86 10.70 Low Middle High Limit

(dBm) 30 30 30 Margin

(dB)

-19.75

-18.14

-19.30 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 30 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A OUTPUT POWER PEAK POWER LOW CH DATE: AUGUST 02, 2014 IC:579C-E2816A PEAK POWER MID CH UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 31 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PEAK POWER HIGH CH DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 32 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 IC:579C-E2816A REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9.1.6. AVERAGE POWER LIMIT None; for reporting purposes only. TEST PROCEDURE The transmitter output is connected to a power meter. RESULTS The cable assembly insertion loss of 10.9 dB (including 10 dB pad and .9 dB cable) was entered as an offset in the power meter to allow for direct reading of power. Channel Frequency Average Power

(MHz) 2402 2441 2480

(dBm) 10.12 11.75 10.55 Low Middle High UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 33 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.1.7. CONDUCTED SPURIOUS EMISSIONS LIMITS FCC 15.247 (d) IC RSS-210 A8.5 Limit = -20 dBc TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The resolution bandwidth is set to 100 kHz. The video bandwidth is set to 300 kHz. The spectrum from 30 MHz to 26 GHz is investigated with the transmitter set to the lowest, middle, and highest channels. The bandedges at 2.4 and 2.4835 GHz are investigated with the transmitter set to the normal hopping mode. RESULTS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 34 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS EMISSIONS, LOW CHANNEL LOW CHANNEL BANDEDGE DATE: AUGUST 02, 2014 IC:579C-E2816A LOW CHANNEL SPURIOUS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 35 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS EMISSIONS, MID CHANNEL MID CHANNEL REFERENCE DATE: AUGUST 02, 2014 IC:579C-E2816A MID CHANNEL SPURIOUS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 36 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS EMISSIONS, HIGH CHANNEL HIGH CHANNEL BANDEDGE DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH CHANNEL SPURIOUS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 37 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS BANDEDGE EMISSIONS WITH HOPPING ON LOW BANDEDGE WITH HOPPING ON DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH BANDEDGE WITH HOPPING ON UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 38 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.2. ENHANCED DATA RATE 8PSK MODULATION 9.2.1. 20 dB AND 99% BANDWIDTH LIMIT None; for reporting purposes only. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The RBW is set to 1% of the 20 dB bandwidth. The VBW is set to RBW. The sweep time is coupled. RESULTS Channel Low Middle High Frequency 20 dB Bandwidth 99% Bandwidth

(MHz) 2402 2441 2480

(MHz) 1.376 1.359 1.357

(MHz) 1.2437 1.2517 1.2493 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 39 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 20 dB AND 99% BANDWIDTH BANDWIDTH LOW CH DATE: AUGUST 02, 2014 IC:579C-E2816A BANDWIDTH MID CH UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 40 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A BANDWIDTH HIGH CH DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 41 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.2.2. HOPPING FREQUENCY SEPARATION LIMIT FCC 15.247 (a) (1) IC RSS-210 A8.1 (b) Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hoping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 125 mW. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The RBW is set to 100 kHz and the VBW is set to 100 kHz. The sweep time is coupled. RESULTS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 42 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A HOPPING FREQUENCY SEPARATION HOPPING FREQUENCY SEPARATION DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 43 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.2.3. NUMBER OF HOPPING CHANNELS LIMIT FCC 15.247 (a) (1) (iii) IC RSS-210 A8.1 (d) Frequency hopping systems in the 2400 2483.5 MHz band shall use at least 15 non-

overlapping channels. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The span is set to cover the entire authorized band, in either a single sweep or in multiple contiguous sweeps. The RBW is set to a maximum of 1 % of the span. The analyzer is set to Max Hold. RESULTS Normal Mode: 79 Channels observed. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 44 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A NUMBER OF HOPPING CHANNELS NUMBER OF HOPPING CHANNELS (100 MHZ SPAN) DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF HOPPING CHANNELS (30 MHZ SPAN, FIRST SEGMENT) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 45 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF HOPPING CHANNELS (30 MHZ SPAN, SECOND SEGMENT) NUMBER OF HOPPING CHANNELS (30 MHZ SPAN, THIRD SEGMENT) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 46 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9.2.4. AVERAGE TIME OF OCCUPANCY DATE: AUGUST 02, 2014 IC:579C-E2816A LIMIT FCC 15.247 (a) (1) (iii) IC RSS-210 A8.1 (d) The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The span is set to 0 Hz, centered on a single, selected hopping channel. The width of a single pulse is measured in a fast scan. The number of pulses is measured in a 3.16 second scan, to enable resolution of each occurrence. The average time of occupancy in the specified 31.6 second period (79 channels * 0.4 s) is equal to 10 * (# of pulses in 3.16 s) * pulse width. RESULTS Time Of Occupancy = 10 * xx pulses * yy msec = zz msec 8PSK (EDR) Mode DH Packet Pulse Width

(msec) Average Time of

(sec) Number of Pulses in

(sec) 3.16 Limit seconds 3DH1 3DH3 3DH5 0.423 1.68 2.93 32 12 12 0.135 0.202 0.352 0.4 0.4 0.4 Margin

(sec)

-0.265

-0.198

-0.048 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 47 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PULSE WIDTH - DH1 PULSE WIDTH DH1 DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF PULSES IN 3.16 SECOND OBSERVATION PERIOD DH1 NUMBER OF PULSES DH1 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 48 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PULSE WIDTH DH3 PULSE WIDTH DH3 DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF PULSES IN 3.16 SECOND OBSERVATION PERIOD DH3 NUMBER OF PULSES DH3 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 49 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PULSE WIDTH DH5 PULSE WIDTH DH5 DATE: AUGUST 02, 2014 IC:579C-E2816A NUMBER OF PULSES IN 3.16 SECOND OBSERVATION PERIOD DH5 NUMBER OF PULSES DH5 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 50 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9.2.5. OUTPUT POWER DATE: AUGUST 02, 2014 IC:579C-E2816A LIMIT 15.247 (b) (1) RSS-210 Issue 7 Clause A8.4 The maximum antenna gain is less than 6 dBi, therefore the limit is 30 dBm. TEST PROCEDURE The transmitter output is connected to a spectrum analyzer the analyzer bandwidth is set to a value greater than the 20 dB bandwidth of the EUT. RESULTS Channel Frequency Output Power

(MHz) 2402 2441 2480

(dBm) 9.48 11.33 10.00 Low Middle High Limit

(dBm) 30 30 30 Margin

(dB)

-20.52

-18.68

-20.00 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 51 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A OUTPUT POWER PEAK POWER LOW CH DATE: AUGUST 02, 2014 IC:579C-E2816A PEAK POWER MID CH UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 52 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A PEAK POWER HIGH CH DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 53 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 IC:579C-E2816A REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 9.2.6. AVERAGE POWER LIMIT None; for reporting purposes only. TEST PROCEDURE The transmitter output is connected to a power meter. RESULTS The cable assembly insertion loss of 10.9 dB (including 10 dB pad and .9 dB cable) was entered as an offset in the power meter to allow for direct reading of power. Channel Frequency Average Power

(MHz) 2402 2441 2480

(dBm) 8.00 9.80 8.50 Low Middle High UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 54 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 9.2.7. CONDUCTED SPURIOUS EMISSIONS LIMITS FCC 15.247 (d) IC RSS-210 A8.5 Limit = -20 dBc TEST PROCEDURE The transmitter output is connected to a spectrum analyzer. The resolution bandwidth is set to 100 kHz. The video bandwidth is set to 300 kHz. The spectrum from 30 MHz to 26 GHz is investigated with the transmitter set to the lowest, middle, and highest channels. The bandedges at 2.4 and 2.4835 GHz are investigated with the transmitter set to the normal hopping mode. RESULTS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 55 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS EMISSIONS, LOW CHANNEL LOW CHANNEL BANDEDGE DATE: AUGUST 02, 2014 IC:579C-E2816A LOW CHANNEL SPURIOUS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 56 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS EMISSIONS, MID CHANNEL MID CHANNEL REFERENCE DATE: AUGUST 02, 2014 IC:579C-E2816A MID CHANNEL SPURIOUS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 57 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS EMISSIONS, HIGH CHANNEL HIGH CHANNEL BANDEDGE DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH CHANNEL SPURIOUS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 58 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A SPURIOUS BANDEDGE EMISSIONS WITH HOPPING ON LOW BANDEDGE WITH HOPPING ON DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH BANDEDGE WITH HOPPING ON UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 59 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A RADIATED TEST RESULTS 10. 10.1. LIMITS AND PROCEDURE LIMITS FCC 15.205 and 15.209 IC RSS-210 Clause 2.6 (Transmitter) IC RSS-GEN Clause 6 (Receiver) Frequency Range

(MHz) 30 - 88 88 - 216 216 - 960 Above 960 Field Strength Limit

(uV/m) at 3 m Field Strength Limit

(dBuV/m) at 3 m 100 150 200 500 40 43.5 46 54 TEST PROCEDURE The EUT is placed on a non-conducting table 80 cm above the ground plane. The antenna to EUT distance is 3 meters. The EUT is configured in accordance with ANSI C63.4. The EUT is set to transmit in a continuous mode. For measurements below 1 GHz the resolution bandwidth is set to 100 kHz for peak detection measurements or 120 kHz for quasi-peak detection measurements. Peak detection is used unless otherwise noted as quasi-peak. For measurements above 1 GHz the resolution bandwidth is set to 1 MHz, then the video bandwidth is set to 1 MHz for peak measurements and 10 Hz for average measurements. The spectrum from 30 MHz to 26 GHz is investigated with the transmitter set to the lowest, middle, and highest channels in the 2.4 GHz band. The frequency range of interest is monitored at a fixed antenna height and EUT azimuth. The EUT is rotated through 360 degrees to maximize emissions received. The antenna is scanned from 1 to 4 meters above the ground plane to further maximize the emission. Measurements are made with the antenna polarized in both the vertical and the horizontal positions. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 60 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 10.2. TRANSMITTER ABOVE 1GHz 10.2.1. BASIC DATA RATE GFSK MODULATION RESTRICTED BANDEDGE (LOW CHANNEL, HORIZONTAL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 61 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A RESTRICTED BANDEDGE (LOW CHANNEL, VERTICAL) LOW CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 IC:579C-E2816A LOW CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 62 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, HORIZONTAL) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 63 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, VERTICAL) HIGH CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 64 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A LOW CHANNEL HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC:579C-E2816A LOW CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 65 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATA Trace Markers DATE: AUGUST 02, 2014 IC:579C-E2816A Marker Frequency

(GHz) Meter Reading

(dBuV) Det AF T712 Amp/Cbl/Fltr/

DC Corr

(dB/m) Pad (dB)

(dB) Corrected Reading

(dBuV/m) Avg Limit Margin

(dBuV/m)

(dB) Peak Limit

(dBuV/m

) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 1.041 41.86 PK3 26.7

-22.4

* 1.041 28.98 VB1T 26.6

-22.4

* 1.197 41.93 PK3 28.9

* 1.197 28.89 VB1T 28.9

* 1.06 42.17 PK3 26.9

* 1.06 29.04 VB1T 27

* 12.52 35.08 PK3 38.5

* 12.52 22.14 VB1T 38.5

* 4.281 38.03 PK3

* 4.281 25.37 VB1T 33 33

* 11.096 34.45 PK3 37.5

* 11.096 22.17 VB1T 37.5

-22

-22

-22.4

-22.4

-20.8

-20.8

-27.4

-27.4

-21

-21 0 1.2 0 1.2 0 1.2 0 1.2 0 1.2 0 1.2 46.16 34.38 48.83 36.99 46.67 34.84 52.78 41.04 43.63 32.17 50.95 39.87

-

54

-

54

-

54

-

54

-

54

-

54

-

-19.62

-

-17.01

-

-19.16

-

-12.96

-

-21.83

-

-14.13 74

-

74

-

74

-

74

-

74

-

74

-

-27.84

-

-25.17

-

-27.33

-

-21.22

-

-30.37

-

-23.05

-

182 182 182 182 229 229 262 262 262 262 262 262 179 179 179 179 202 202 100 100 100 100 100 100 H H H H V V H H V V V V 1 2 4 3 5 6

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector FCC Part15 Subpart C 2400MHz Spurious Emissions with Average Scan.TST 30915 24 Mar 2014 Rev 9.5 31 Mar 2014 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 66 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A MID CHANNEL HARMONICS AND SPURIOUS EMISSIONS MID CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC:579C-E2816A MID CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 67 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A DATA Trace Markers Marker Frequency

(GHz) Meter Reading

(dBuV)

* 1.555 41.26 PK3 27.5

-21.6

* 1.554 28.59 VB1T 27.4

-21.6

* 1.267 41.74 PK3 29.4

-22

* 1.268 28.88 VB1T 29.4

-22.1

* 4.816 38.07 PK3 33.5

-26.8

* 4.814 24.95 VB1T 33.5

-26.8

* 12.238 34.67 PK3 38.4

-21.6

* 12.238 21.94 VB1T 38.4

* 3.709 38.78 PK3 32.6

-21.6

-27.9

* 3.711 25.71 VB1T 32.6

-28

* 15.623 35.05 PK3 39.9

-20.5

* 15.624 22.44 VB1T 39.9

-20.5 0 1.2 0 1.2 0 1.2 0 1.2 0 1.2 0 1.2 1 4 2 3 5 6 Det AF T712 Amp/Cbl/Fltr/

DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) Pad (dB)

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity Reading

(dBuV/m) 47.16 35.59 49.14 37.38 44.77 32.85 51.47 39.94 43.48 31.51 54.45 43.04

-

54

-

54

-

54

-

54

-

54

-

54

-

-18.41

-

-16.62

-

-21.15

-

-14.06

-

-22.49

-

-10.96 74

-

74

-

74

-

74

-

74

-

74

-

-26.84

-

-24.86

-

-29.23

-

-22.53

-

-30.52

-

-19.55

-

262 262 262 262 299 299 299 299 272 272 215 215 100 100 146 146 100 100 100 100 202 202 202 202 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector FCC Part15 Subpart C 2400MHz Spurious Emissions with Average Scan.TST 30915 24 Mar 2014 Rev 9.5 31 Mar 2014 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 68 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A HIGH CHANNEL HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 69 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A DATA Trace Markers Marker Frequency

(GHz) Meter Reading

(dBuV)

* 1.219 42.11 PK3 29.2

* 1.221 28.88 VB1T 29.2

* 1.235 42.35 PK3 29.4

* 1.236 28.86 VB1T 29.4

-22

-22

-22

-22

* 3.782 39.23 PK3 32.7

-28.6

* 3.783 26.56 VB1T 32.7

-28.6

* 12.579 34.71 PK3 38.6

-21.7

* 12.578 21.97 VB1T 38.6

-21.7

* 4.895 37.19 PK3 33.5

-27.3

* 4.897 25.12 VB1T 33.5

-27.4

* 11.998 34.41 PK3 38.2

-20.7

* 11.995 22.06 VB1T 38.2

-20.7 1 4 2 3 5 6 Det AF T712 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin Azimuth

(dB/m)

/Pad (dB)

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(Degs) Height

(cm) Polarity Reading

(dBuV/m) 49.31 37.28 49.75 37.46 43.33 31.86 51.61 40.07 43.39 32.42 51.91 40.76 0 1.2 0 1.2 0 1.2 0 1.2 0 1.2 0 1.2

-

54

-

54

-

54

-

54

-

54

-

54

-

-16.72

-

-16.54

-

-22.14

-

-13.93

-

-21.58

-

-13.24 74

-

74

-

74

-

74

-

74

-

74

-

-24.69

-

-24.25

-

-30.67

-

-22.39

-

-30.61

-

-22.09

-

215 215 215 215 215 215 215 215 23 23 133 133 202 202 172 172 172 172 156 156 115 115 122 122 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector FCC Part15 Subpart C 2400MHz Spurious Emissions with Average Scan. TST 30915 24 Mar 2014 Rev 9.5 31 Mar 2014 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 70 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 10.2.2. ENHANCED DATA RATE 8PSK MODULATION RESTRICTED BANDEDGE (LOW CHANNEL, HORIZONTAL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 71 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A RESTRICTED BANDEDGE (LOW CHANNEL, VERTICAL) LOW CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 IC:579C-E2816A LOW CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 72 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, HORIZONTAL HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVG, HORIZ UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 73 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A RESTRICTED BANDEDGE (HIGH CHANNEL, VERTICAL) HIGH CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH CHANNEL RESTRICTED, AVG, VERT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 74 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A LOW CHANNEL HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC:579C-E2816A LOW CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 75 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A DATA Trace Markers Marker Frequency

(GHz) Meter Reading

(dBuV)

* 1.297 41.45 PK3 29.1

* 1.297 28.9 VB1T 29.1

* 1.252 42.07 PK3 29.6

* 1.25 28.92 VB1T 29.6

-22

-22

-22.1

-22.1

* 5.089 37.58 PK3 33.6

-25.9

* 5.087 25.15 VB1T 33.6

-26

* 11.994 34.67 PK3 38.2

-20.7

* 11.994 22.12 VB1T 38.2

-20.7

* 4.786 38.84 PK3 33.5

* 4.787 25.86 VB1T 33.5

-27.5

-27.4

* 9.184 34.13 PK3 35.9

-21.2

* 9.18 22.03 VB1T 35.9

-21.3 1 4 2 3 5 6 Det AF T712 Amp/Cbl/Fltr/

DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) Pad (dB)

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity Reading

(dBuV/m) 48.55 37.1 49.57 37.52 45.28 33.85 52.17 40.72 44.84 33.06 48.83 37.73 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1

-

54

-

54

-

54

-

54

-

54

-

54

-

-16.9

-

-16.48

-

-20.15

-

-13.28

-

-20.94

-

-16.27 74

-

74

-

74

-

74

-

74

-

74

-

-25.45

-

-24.43

-

-28.72

-

-21.83

-

-29.16

-

-25.17

-

133 133 154 154 206 206 206 206 191 191 191 191 122 122 139 139 231 231 111 111 111 111 111 111 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector 8PSK low channel.DAT 30915 24 Mar 2014 Rev 9.5 31 Mar 2014 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 76 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A MID CHANNEL HARMONICS AND SPURIOUS EMISSIONS MID CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC:579C-E2816A MID CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 77 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A DATA Trace Markers Marker Frequency

(GHz) Meter Reading

(dBuV)

* 1.23 41.51 PK3 29.3

* 1.23 28.9 VB1T 29.3

* 1.261 41.77 PK3 29.5

* 1.261 28.94 VB1T 29.5

-22

-22

-22

-22

* 3.953 39.17 PK3 32.9

-28.2

* 3.951 26.16 VB1T 32.9

-28.2

* 12.525 34.53 PK3 38.5

-20.8

* 12.525 22.18 VB1T 38.5

* 5.029 38.35 PK3 33.5

-20.8

-27.3

* 5.029 25.71 VB1T 33.5

-27.2

* 8.415 35.6 PK3 35.4

-23.6

* 8.415 23.28 VB1T 35.4

-23.6 1 4 2 3 5 6 Det AF T712 Amp/Cbl/Fltr/

DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) Pad (dB)

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity Reading

(dBuV/m) 48.81 37.3 49.27 37.54 43.87 31.96 52.23 40.98 44.55 33.11 47.4 36.18 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1

-

54

-

54

-

54

-

54

-

54

-

54

-

-16.7

-

-16.46

-

-22.04

-

-13.02

-

-20.89

-

-17.82 74

-

74

-

74

-

74

-

74

-

74

-

-25.19

-

-24.73

-

-30.13

-

-21.77

-

-29.45

-

-26.6

-

191 191 191 191 211 211 155 155 209 209 209 209 111 111 122 122 143 143 114 114 183 183 183 183 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector FCC Part15 Subpart C 2400MHz Spurious Emissions with Average Scan.TST 30915 24 Mar 2014 Rev 9.5 31 Mar 2014 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 78 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A HIGH CHANNEL HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT DATE: AUGUST 02, 2014 IC:579C-E2816A HIGH CHANNEL VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 79 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A Det AF T712 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB)

(dBuV/m)

(dB)

(dBuV/m)

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Trace Markers Marker Frequency

(GHz) Meter Reading

(dBuV)

* 1.262 41.78 PK3 29.5

* 1.262 28.91 VB1T 29.5

-22

-22

* 2.695 41.47 PK3 31.7

-20.1

* 2.695 28.76 VB1T 31.7

-20.1

* 3.784 40.11 PK3 32.7

-28.6

* 3.784 26.52 VB1T 32.7

-28.6

* 7.55 37.05 PK3 35.2

-25

* 7.55 24.24 VB1T 35.2

* 4.362 37.87 PK3 33.2

-25.1

-27.8

* 4.362 25.69 VB1T 33.2

-27.9

* 8.303 35.04 PK3 35.3

-23.6

* 8.303 23.23 VB1T 35.3

-23.7 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 0 1.1 1 4 2 3 5 6 Reading

(dBuV/m) 49.28 37.51 53.07 41.46 44.21 31.72 47.25 35.44 43.27 32.09 46.74 35.93

-

54

-

54

-

54

-

54

-

54

-

54

-

-16.49

-

-12.54

-

-22.28

-

-18.56

-

-21.91

-

-18.07 74

-

74

-

74

-

74

-

74

-

74

-

-24.72

-

-20.93

-

-29.79

-

-26.75

-

-30.73

-

-27.26

-

219 219 225 225 225 225 205 205 166 166 166 166 141 141 151 151 174 174 150 150 166 166 155 155 H H V V H H H H V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector FCC Part15 Subpart C 2400MHz Spurious Emissions with Average Scan.TST 30915 24 Mar 2014 Rev 9.5 31 Mar 2014 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 80 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 10.3. WORST-CASE ABOVE 18 GHz DATE: AUGUST 02, 2014 IC:579C-E2816A SPURIOUS EMISSIONS 18 TO 26 GHz (WORST-CASE CONFIGURATION, HORIZONTAL &

VERTICAL) Note: GFSK, highest power mode used for test. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 81 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 10.4. WORST-CASE BELOW 1 GHz SPURIOUS EMISSIONS 30 TO 1000 MHz (WORST-CASE CONFIGURATION) HORIZONTAL PLOT VERTICAL PLOT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 82 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATA Trace Markers DATE: AUGUST 02, 2014 IC:579C-E2816A Marker Frequency Meter Det Hybrid Amp/Cbl (dB) Corrected QPk Limit Margin Azimuth Height Polarity

(MHz) Reading

(dBuV)

* 333.4 30.085 46.66 47.5525 66.7625 66.7625 103.2275 106.16 34.77 36.33 42.55 37.49 47.18 45.62 39.22 37.62 PK PK PK PK PK PK PK PK 14 21.4 9.5 9 8.1 8.1 11.1 11.8 Reading

(dBuV/m) 18.67 25.93 20.35 14.89 23.68 22.12 19.02 18.12

(dBuV/m)

(dB)

(Degs)

(cm) 46.02 40 40 40 40 40 43.52 43.52

-27.35

-14.07

-19.65

-25.11

-16.32

-17.88

-24.5

-25.4 0-360 0-360 0-360 0-360 0-360 0-360 0-360 0-360 100 100 100 201 201 100 100 301 H V V H H V V H

-30.1

-31.8

-31.7

-31.6

-31.6

-31.6

-31.3

-31.3 4 5 6 1 2 7 8 3

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK - Peak detector FCC Part 15 Subpart C 30-1000MHz.TST 30915 18 Jan 2014 Rev 9.5 18 Apr 2014 Note: GFSK, highest power mode used for test. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 83 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A 11. AC POWER LINE CONDUCTED EMISSIONS LIMITS FCC 15.207 (a) RSS-Gen 7.2.2 TEST PROCEDURE The EUT is placed on a non-conducting table 40 cm from the vertical ground plane and 80 cm above the horizontal ground plane. The EUT is configured in accordance with ANSI C63.4. The receiver is set to a resolution bandwidth of 9 kHz. Peak detection is used unless otherwise noted as quasi-peak or average. Line conducted data is recorded for both NEUTRAL and HOT lines. RESULTS UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 84 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 6 WORST EMISSIONS Line-L1 .15 - 30MHz Trace Markers DATE: AUGUST 02, 2014 IC:579C-E2816A Marker Frequency Meter Reading Det T24 IL L1 LC Cables 1&3 Corrected CISPR 22 Class Margin to CISPR 22 Class Margin to

(MHz)

(dBuV)

(dB)

(dB) Reading B QP Limit (dB) B Avg Limit (dB) dBuV

.1725 49.47 PK 1.2

.1725 29.62 Av 1.2

.7845 44.42

.7845 31.84 17.439 41.59 17.439 27.51 PK Av PK Av

.3

.3

.3

.3 0 0 0 0

.2

.2 50.67 64.8

-14.13

-

-

30.82 44.72 32.14 42.09 28.01

-

56

-

60

-

-

54.8

-23.98

-11.28

-

-17.91

-

-

46

-

50

-

-13.86

-

-21.99 1 2 3 4 5 6 Line-L2 .15 - 30MHz Trace Markers Marker Frequency Meter Reading Det T24 IL L2 LC Cables 2&3 Corrected CISPR 22 Class Margin to CISPR 22 Class Margin to

(MHz)

(dBuV)

(dB)

(dB) Reading B QP Limit (dB) B Avg Limit (dB) dBuV

.1635 47.92 PK 1.3

.1635 23.96 Av 1.3

.78

.78 44.18 PK

.3 27.19 Av

.3 17.664 40.17 PK

.3 17.664 22.32 Av

.3 0 0 0 0

.2

.2 49.22 65.3

-16.08

-

-

25.26 44.48 27.49 40.67 22.82

-

56

-

60

-

-

55.3

-30.04

-11.52

-

-19.33

-

-

46

-

50

-

-18.51

-

-27.18 7 8 9 10 11 12 PK - Peak detector Av - average detection UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 85 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A LINE 1 RESULTS DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 86 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A LINE 2 RESULTS DATE: AUGUST 02, 2014 IC:579C-E2816A UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 87 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

 

 

REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A 12. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO DATE: AUGUST 02, 2014 IC:579C-E2816A RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION X-AXIS PHOTO UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 88 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A Y-AXIS PHOTO DATE: AUGUST 02, 2014 IC:579C-E2816A Z-AXIS PHOTO UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 89 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) RADIATED FRONT PHOTO (BELOW 1 GHz) DATE: AUGUST 02, 2014 IC:579C-E2816A RADIATED BACK PHOTO (BELOW 1 GHz) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 90 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) RADIATED FRONT PHOTO (ABOVE 1 GHz) DATE: AUGUST 02, 2014 IC:579C-E2816A RADIATED BACK PHOTO (ABOVE 1 GHz) UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 91 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E1C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC:579C-E2816A POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO END OF REPORT UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 92 of 92 TEL: (510) 771-1000 FORM NO: CCSUP4701I FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

 

 

Date: July 10, 2014 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Attn: Office of Engineering and Technology Ref: FCC ID: BCG-E2816A, Models: A1586 and A1549 To whom it may concern:

I, the undersigned, hereby authorize UL Verification Services Inc., located at 47173 Benicia Street, Fremont, CA 94538, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our agent, we still recognize that we are responsible to:

a) b) c) d) v1.0 comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

Apple Inc. 1 Infinite Loop Cupertino, CA www.apple.com e) f) g) h) i) j) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager tmuresan@apple.com v1.0 Apple Inc. 1 Infinite Loop Cupertino, CA www.apple.com

 

 

Request for Confidentiality BCG-E2816A, Models: A1586 and A1549 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject:

FCC ID:

To whom it may concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Permanent Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely:

Block Diagrams Electrical Schematic Diagrams Technical Description Antenna Specifications Tune-up Procedure These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Apple Inc. 1 Infinite Loop Cupertino, CA www.apple.com v1.1 Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued:

External Photographs Internal Photographs Test Setup Photographs User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Tiberiu Muresan Apple Inc. Wireless Certification Manager tmuresan@apple.com v1.1 Date: July 25, 2014 Apple Inc. 1 Infinite Loop Cupertino, CA www.apple.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/23/2014 20140623_SystemPerformanceCheck-D750V3 SN 1024 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 750 MHz; = 0.899 S/m; r = 40.6; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(9.2, 9.2, 9.2); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM v5.0 (A); Type: QD000P40CD; Serial: 1602 Head/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 33.176 V/m; Power Drift = -0.09 dB Fast SAR: SAR(1 g) = 0.812 W/kg; SAR(10 g) = 0.551 W/kg Maximum value of SAR (interpolated) = 0.957 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.176 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 1.18 W/kg SAR(1 g) = 0.784 W/kg; SAR(10 g) = 0.514 W/kg Maximum value of SAR (measured) = 0.957 W/kg 0 dB = 0.957 W/kg = -0.19 dBW/kg Plot No. 1 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/23/2014 20140623_SystemPerformanceCheck-D750V3 SN 1024 Frequency: 750 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 0.945 W/kg Plot No. 2 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/24/2014 20140624_SystemPerformanceCheck-D2600V2 SN 1036 Frequency: 2600 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 2600 MHz; = 2.101 S/m; r = 52.125; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(6.15, 6.15, 6.15); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1099 Body/Pin=100 mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value = 65.274 V/m; Power Drift = 0.06 dB Fast SAR: SAR(1 g) = 6.11 W/kg; SAR(10 g) = 2.67 W/kg Maximum value of SAR (interpolated) = 8.91 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 65.274 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 13.2 W/kg SAR(1 g) = 5.92 W/kg; SAR(10 g) = 2.59 W/kg Maximum value of SAR (measured) = 8.66 W/kg 0 dB = 8.66 W/kg = 9.38 dBW/kg Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/24/2014 20140624_SystemPerformanceCheck-D2600V2 SN 1036 Frequency: 2600 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 8.65 W/kg Plot No. 4 Test Laboratory: UL Verification Services Inc. SAR Lab B Date: 6/19/2014 20140619_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 2450 MHz; = 1.976 S/m; r = 51.396; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE3 Sn500; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3749; ConvF(6.49, 6.49, 6.49); Calibrated: 1/29/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Body/Pin=100 mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value = 63.212 V/m; Power Drift = -0.12 dB Fast SAR: SAR(1 g) = 5.73 W/kg; SAR(10 g) = 2.47 W/kg Maximum value of SAR (interpolated) = 8.63 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 63.212 V/m; Power Drift = -0.12 dB Peak SAR (extrapolated) = 11.3 W/kg SAR(1 g) = 5.32 W/kg; SAR(10 g) = 2.44 W/kg Maximum value of SAR (measured) = 7.50 W/kg 0 dB = 7.50 W/kg = 8.75 dBW/kg Plot No. 5 Test Laboratory: UL Verification Services Inc. SAR Lab B Date: 6/19/2014 20140619_SystemPerformanceCheck-D2450V2 SN 748 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.56 W/kg Plot No. 6 Test Laboratory: UL Verification Services Inc. SAR Lab B Date: 6/30/2014 20140630_SystemPerformanceCheck-D2450V2 SN 706 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 2450 MHz; = 1.956 S/m; r = 51.75; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE3 Sn500; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3749; ConvF(6.49, 6.49, 6.49); Calibrated: 1/29/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Body/Pin=100 mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value = 65.179 V/m; Power Drift = -0.05 dB Fast SAR: SAR(1 g) = 5.33 W/kg; SAR(10 g) = 2.29 W/kg Maximum value of SAR (interpolated) = 7.85 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 65.179 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 11.5 W/kg SAR(1 g) = 5.49 W/kg; SAR(10 g) = 2.53 W/kg Maximum value of SAR (measured) = 7.88 W/kg 0 dB = 7.88 W/kg = 8.97 dBW/kg Plot No. 7 Test Laboratory: UL Verification Services Inc. SAR Lab B Date: 6/30/2014 20140630_SystemPerformanceCheck-D2450V2 SN 706 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 7.73 W/kg Plot No. 8 Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 6/30/2014 20140630_SystemPerformanceCheck-D1900V2 SN 5d163 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1900 MHz; = 1.573 S/m; r = 51.875; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1360; Calibrated: 3/17/2014

- Probe: EX3DV4 - SN3751; ConvF(6.74, 6.74, 6.74); Calibrated: 11/21/2013;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Body/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 60.693 V/m; Power Drift = 0.09 dB Fast SAR: SAR(1 g) = 4.27 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (interpolated) = 5.72 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.693 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 7.70 W/kg SAR(1 g) = 4.26 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 5.77 W/kg 0 dB = 5.77 W/kg = 7.61 dBW/kg Plot No. 9 Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 6/30/2014 20140630_SystemPerformanceCheck-D1900V2 SN 5d163 Frequency: 1900 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.72 W/kg Plot No. 10 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/24/2014 20140624_SystemPerformanceCheck-D1900V2 SN 5d163 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1900 MHz; = 1.583 S/m; r = 54.564; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(7.95, 7.95, 7.95); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI B v5.0; Type: QDOVA001BB; Serial: 1121 Body/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 58.691 V/m; Power Drift = 0.04 dB Fast SAR: SAR(1 g) = 4.07 W/kg; SAR(10 g) = 2.04 W/kg Maximum value of SAR (interpolated) = 5.46 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.691 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 7.40 W/kg SAR(1 g) = 4.05 W/kg; SAR(10 g) = 2.1 W/kg Maximum value of SAR (measured) = 5.49 W/kg 0 dB = 5.49 W/kg = 7.40 dBW/kg Plot No. 11 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/24/2014 20140624_SystemPerformanceCheck-D1900V2 SN 5d163 Frequency: 1900 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.39 W/kg Plot No. 12 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/26/2014 20140626_SystemPerformanceCheck-D835V2 SN 4d142 Frequency: 835 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 835 MHz; = 1.005 S/m; r = 53.612; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Body/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 35.069 V/m; Power Drift = 0.03 dB Fast SAR: SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.685 W/kg Maximum value of SAR (interpolated) = 1.21 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 35.069 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 1.51 W/kg SAR(1 g) = 1.01 W/kg; SAR(10 g) = 0.659 W/kg Maximum value of SAR (measured) = 1.23 W/kg 0 dB = 1.23 W/kg = 0.90 dBW/kg Plot No. 13 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/26/2014 20140626_SystemPerformanceCheck-D835V2 SN 4d142 Frequency: 835 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.22 W/kg Plot No. 14 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/8/2014 20140708_SystemPerformanceCheck-D750V3 SN 1024 Frequency: 750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 750 MHz; = 0.972 S/m; r = 53.34; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.12, 10.12, 10.12); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI B v5.0; Type: QDOVA001BB; Serial: 1121 Body/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 33.283 V/m; Power Drift = -0.00 dB Fast SAR: SAR(1 g) = 0.882 W/kg; SAR(10 g) = 0.597 W/kg Maximum value of SAR (interpolated) = 1.04 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 33.283 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 1.25 W/kg SAR(1 g) = 0.860 W/kg; SAR(10 g) = 0.573 W/kg Maximum value of SAR (measured) = 1.04 W/kg 0 dB = 1.04 W/kg = 0.17 dBW/kg Plot No. 15 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/8/2014 20140708_SystemPerformanceCheck-D750V3 SN 1024 Frequency: 750 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 1.04 W/kg Plot No. 16 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 7/17/2014 20140717_SystemPerformanceCheck- D5GHzV2 SN 1168 Frequency: 5800 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5800 MHz; = 6.2 S/m; r = 47.422; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1357; Calibrated: 2/17/2014

- Probe: EX3DV4 - SN3901; ConvF(3.98, 3.98, 3.98); Calibrated: 2/25/2014;

- Sensor-Surface: 1.4mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 A; Type: QD OVA 002 AA; Serial: 1180 Body/5.8 GHz, Pin=100mW/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 45.607 V/m; Power Drift = -0.03 dB Fast SAR: SAR(1 g) = 6.39 W/kg; SAR(10 g) = 1.77 W/kg Maximum value of SAR (interpolated) = 17.5 W/kg Body/5.8 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 45.607 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 30.7 W/kg SAR(1 g) = 6.9 W/kg; SAR(10 g) = 1.93 W/kg Maximum value of SAR (measured) = 16.7 W/kg 0 dB = 16.7 W/kg = 12.23 dBW/kg Plot No. 17 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 7/17/2014 20140717_SystemPerformanceCheck-D5GHzV2 SN 1168 Frequency: 5800 MHz; Duty Cycle: 1:1 Body/5.8 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 11.0 W/kg Plot No. 18 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 7/7/2014 20140707 SystemPerformanceCheck-D5GHzV2 SN 1003 Frequency: 5800 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5800 MHz; = 6.077 S/m; r = 46.212; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1239; Calibrated: 4/15/2014

- Probe: EX3DV4 - SN3885; ConvF(3.86, 3.86, 3.86); Calibrated: 9/18/2013;

- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Body/5.8 GHz, Pin=100mW 2 2/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 46.784 V/m; Power Drift = -0.10 dB Fast SAR: SAR(1 g) = 6.39 W/kg; SAR(10 g) = 1.74 W/kg Maximum value of SAR (interpolated) = 17.6 W/kg Body/5.8 GHz, Pin=100mW 2 2/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 46.784 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 28.1 W/kg SAR(1 g) = 6.8 W/kg; SAR(10 g) = 1.91 W/kg Maximum value of SAR (measured) = 16.5 W/kg 0 dB = 16.5 W/kg = 12.17 dBW/kg Plot No. 19 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 7/7/2014 20140707 SystemPerformanceCheck-D5GHzV2 SN 1003 Frequency: 5800 MHz; Duty Cycle: 1:1 Body/5.8 GHz, Pin=100mW 2 2/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 11.0 W/kg Plot No. 20 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/23/2014 20140623_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1750 MHz; = 1.32 S/m; r = 40.386; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.58, 8.58, 8.58); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM A; Type: SAM; Serial: 1831 Head/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 61.980 V/m; Power Drift = -0.16 dB Fast SAR: SAR(1 g) = 3.77 W/kg; SAR(10 g) = 2.01 W/kg Maximum value of SAR (interpolated) = 4.89 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 61.980 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 6.30 W/kg SAR(1 g) = 3.49 W/kg; SAR(10 g) = 1.87 W/kg Maximum value of SAR (measured) = 4.66 W/kg 0 dB = 4.66 W/kg = 6.68 dBW/kg Plot No. 21 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/23/2014 20140623_SystemPerformanceCheck-D1750V2 SN 1050 Frequency: 1750 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 4.81 W/kg Plot No. 22 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/7/2014 20140707_SystemPerformanceCheck-D1900V2 SN 5d163 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1900 MHz; = 1.542 S/m; r = 51.988; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(7.88, 7.88, 7.88); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Body/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 60.806 V/m; Power Drift = -0.03 dB Fast SAR: SAR(1 g) = 4.18 W/kg; SAR(10 g) = 2.09 W/kg Maximum value of SAR (interpolated) = 5.61 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 60.806 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 7.62 W/kg SAR(1 g) = 4.12 W/kg; SAR(10 g) = 2.13 W/kg Maximum value of SAR (measured) = 5.58 W/kg 0 dB = 5.58 W/kg = 7.47 dBW/kg Plot No. 23 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/7/2014 20140707_SystemPerformanceCheck-D1900V2 SN 5d163 Frequency: 1900 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.56 W/kg Plot No. 24 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/7/2014 20140707_SystemPerformanceCheck-D1750V2 SN 1053 Frequency: 1750 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1750 MHz; = 1.49 S/m; r = 52.093; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.26, 8.26, 8.26); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Body/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 59.392 V/m; Power Drift = -0.01 dB Fast SAR: SAR(1 g) = 4.02 W/kg; SAR(10 g) = 2.1 W/kg Maximum value of SAR (interpolated) = 5.27 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 59.392 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 7.07 W/kg SAR(1 g) = 3.95 W/kg; SAR(10 g) = 2.1 W/kg Maximum value of SAR (measured) = 5.31 W/kg 0 dB = 5.31 W/kg = 7.25 dBW/kg Plot No. 25 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/7/2014 20140707_SystemPerformanceCheck-D1750V2 SN 1053 Frequency: 1750 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.17 W/kg Plot No. 26 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 6/26/2014 20140626_SystemPerformanceCheck-D1900V2 SN 5d140 Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1900 MHz; = 1.393 S/m; r = 39.496; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.52, 7.52, 7.52); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM with CRP v5.0; Type: QD000P40CD; Serial: 1830 Head/Pin=100 mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Reference Value = 61.093 V/m; Power Drift = -0.04 dB Fast SAR: SAR(1 g) = 3.86 W/kg; SAR(10 g) = 1.98 W/kg Maximum value of SAR (interpolated) = 5.12 W/kg Head/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 61.093 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 6.96 W/kg SAR(1 g) = 3.75 W/kg; SAR(10 g) = 1.94 W/kg Maximum value of SAR (measured) = 5.04 W/kg 0 dB = 5.04 W/kg = 7.02 dBW/kg Plot No. 27 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 6/26/2014 20140626_SystemPerformanceCheck-D1900V2 SN 5d140 Frequency: 1900 MHz; Duty Cycle: 1:1 Head/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 5.06 W/kg Plot No. 28 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/23/2014 GSM850_UAT Frequency: 836.6 MHz; Duty Cycle: 1:4; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; = 0.923 S/m; r = 42.383; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.29, 10.29, 10.29); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 ; Type: QD000P40CD; Serial: 1742 LHS/Touch_GPRS 2 slot_ch 190/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.831 W/kg LHS/Touch_GPRS 2 slot_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.702 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = 0.803 W/kg; SAR(10 g) = 0.532 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.963 W/kg 0 dB = 0.963 W/kg = -0.16 dBW/kg Plot No. 1 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/23/2014 GSM850_LAT Frequency: 836.6 MHz; Duty Cycle: 1:8; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; = 1.003 S/m; r = 55.516; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Rear/GSM Voice_ch 190/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.376 W/kg Rear/GSM Voice_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.615 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.535 W/kg SAR(1 g) = 0.333 W/kg; SAR(10 g) = 0.217 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.404 W/kg 0 dB = 0.404 W/kg = -3.94 dBW/kg Plot No. 2 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/23/2014 GSM850_LAT Frequency: 836.6 MHz; Duty Cycle: 1:4; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; = 1.003 S/m; r = 55.516; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Edge 4/GPRS 2 slots_ch 190/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.574 W/kg Edge 4/GPRS 2 slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.071 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.699 W/kg SAR(1 g) = 0.467 W/kg; SAR(10 g) = 0.309 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.569 W/kg 0 dB = 0.569 W/kg = -2.45 dBW/kg Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 7/18/2014 GSM1900_UAT Frequency: 1909.8 MHz; Duty Cycle: 1:4; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1910 MHz; = 1.419 S/m; r = 40.052; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.52, 7.52, 7.52); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM with CRP v5.0; Type: QD000P40CD; Serial: 1830 RHS/Touch_EGPRS_2 Slots _ch 810/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.15 W/kg RHS/Touch_EGPRS_2 Slots _ch 810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 20.822 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 1.95 W/kg SAR(1 g) = 0.907 W/kg; SAR(10 g) = 0.471 W/kg Maximum value of SAR (measured) = 1.31 W/kg 0 dB = 1.31 W/kg = 1.17 dBW/kg Plot No. 4 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 7/2/2014 GSM1900_LAT Frequency: 1909.8 MHz; Duty Cycle: 1:8; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1910 MHz; = 1.53 S/m; r = 51.66; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.09, 7.09, 7.09); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 B; Type: SM 000 T01 DA; Serial: TP:1247 Rear/Voice_ch 810/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.46 W/kg Rear/Voice_ch 810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.056 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 2.00 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.494 W/kg Maximum value of SAR (measured) = 1.33 W/kg 0 dB = 1.33 W/kg = 1.24 dBW/kg Plot No. 5 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 7/2/2014 GSM1900_LAT Frequency: 1909.8 MHz; Duty Cycle: 1:4; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1910 MHz; = 1.53 S/m; r = 51.66; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.09, 7.09, 7.09); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 B; Type: SM 000 T01 DA; Serial: TP:1247 Rear/EGPRS 2 Slots_ch 810/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.64 W/kg Rear/EGPRS 2 Slots_ch 810/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 33.081 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 2.30 W/kg SAR(1 g) = 1.16 W/kg; SAR(10 g) = 0.569 W/kg Maximum value of SAR (measured) = 1.59 W/kg 0 dB = 1.59 W/kg = 2.01 dBW/kg Plot No. 6 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/2/2014 W-CDMA Band V_UAT Frequency: 846.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 846.6 MHz; = 0.895 S/m; r = 41.173; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.29, 10.29, 10.29); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 ; Type: QD000P40CD; Serial: 1742 LHS/Touch_Rel. 99_RMC_ch 4233/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.883 W/kg LHS/Touch_Rel. 99_RMC_ch 4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.125 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 1.61 W/kg SAR(1 g) = 0.766 W/kg; SAR(10 g) = 0.496 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.09 W/kg 0 dB = 1.09 W/kg = 0.37 dBW/kg Plot No. 7 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/21/2014 W-CDMA Band V_LAT Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; = 0.994 S/m; r = 53.48; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Front/Rel. 99_RMC_Ch 4183/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.699 W/kg Front/Rel. 99_RMC_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.512 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.983 W/kg SAR(1 g) = 0.518 W/kg; SAR(10 g) = 0.319 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.714 W/kg 0 dB = 0.714 W/kg = -1.46 dBW/kg Plot No. 8 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/20/2014 W-CDMA Band V_LAT Frequency: 836.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.6 MHz; = 0.994 S/m; r = 53.48; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Edge 4/Rel. 99_RMC_Ch 4183/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.01 W/kg Edge 4/Rel. 99_RMC_Ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.512 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.859 W/kg; SAR(10 g) = 0.564 W/kg Maximum value of SAR (measured) = 1.05 W/kg 0 dB = 1.05 W/kg = 0.21 dBW/kg Plot No. 9 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/23/2014 W-CDMA Band IV_LAT Frequency: 1732.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1732.6 MHz; = 1.31 S/m; r = 38.484; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.58, 8.58, 8.58); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM A; Type: SAM; Serial: 1831 RHS/Touch_Rel. 99_RMC_ch 1413/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.791 W/kg RHS/Touch_Rel. 99_RMC_ch 1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.919 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = 0.755 W/kg; SAR(10 g) = 0.485 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.912 W/kg 0 dB = 0.912 W/kg = -0.40 dBW/kg Plot No. 10 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/24/2014 W-CDMA Band IV_UAT Frequency: 1712.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1712.4 MHz; = 1.434 S/m; r = 51.924; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.26, 8.26, 8.26); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Front/Rel. 99_RMC_ch 1312/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.39 W/kg Front/Rel. 99_RMC_ch 1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.355 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 2.00 W/kg SAR(1 g) = 0.977 W/kg; SAR(10 g) = 0.472 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.42 W/kg 0 dB = 1.42 W/kg = 1.52 dBW/kg Plot No. 11 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/24/2014 W-CDMA Band IV_UAT Frequency: 1712.4 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1712.4 MHz; = 1.434 S/m; r = 51.924; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.26, 8.26, 8.26); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Edge 1/Rel. 99_RMC_ch 1312/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.927 W/kg Edge 1/Rel. 99_RMC_ch 1312/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.772 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.98 W/kg SAR(1 g) = 0.999 W/kg; SAR(10 g) = 0.463 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.42 W/kg 0 dB = 1.42 W/kg = 1.52 dBW/kg Plot No. 12 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 6/27/2014 W-CDMA Band II_LAT Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.374 S/m; r = 39.581; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.52, 7.52, 7.52); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM with CRP v5.0; Type: QD000P40CD; Serial: 1830 RHS/Touch_Rel. 99_RMC_ch 9400/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.29 W/kg RHS/Touch_Rel. 99_RMC_ch 9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.940 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.87 W/kg SAR(1 g) = 1.18 W/kg; SAR(10 g) = 0.713 W/kg Maximum value of SAR (measured) = 1.46 W/kg 0 dB = 1.46 W/kg = 1.64 dBW/kg Plot No. 13 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 6/25/2014 W-CDMA Band II_LAT Frequency: 1907.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1907.6 MHz; = 1.554 S/m; r = 51.356; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.09, 7.09, 7.09); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 B; Type: SM 000 T01 DA; Serial: TP:1247 Rear/Rel. 99_RMC_ch 9538/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.45 W/kg Rear/Rel. 99_RMC_ch 9538/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.898 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.01 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.491 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.27 W/kg 0 dB = 1.27 W/kg = 1.04 dBW/kg Plot No. 14 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 6/27/2014 W-CDMA Band II_UAT Frequency: 1907.6 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1907.6 MHz; = 1.55 S/m; r = 50.962; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.09, 7.09, 7.09); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 B; Type: SM 000 T01 DA; Serial: TP:1247 Edge 1/Rel. 99_RMC_ch 9538/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.35 W/kg Edge 1/Rel. 99_RMC_ch 9538/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.960 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.08 W/kg SAR(1 g) = 0.955 W/kg; SAR(10 g) = 0.409 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.46 W/kg 0 dB = 1.46 W/kg = 1.64 dBW/kg Plot No. 15 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/28/2014 CDMA BC0_UAT Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.52 MHz; = 0.928 S/m; r = 41.734; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.29, 10.29, 10.29); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 ; Type: QD000P40CD; Serial: 1742 LHS/Touch_1xEVDO_Rel. 0_ch 384/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.714 W/kg LHS/Touch_1xEVDO_Rel. 0_ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.477 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.649 W/kg; SAR(10 g) = 0.430 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.844 W/kg 0 dB = 0.844 W/kg = -0.74 dBW/kg Plot No. 16 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/24/2014 CDMA_BC0_LAT Frequency: 836.52 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.52 MHz; = 1.003 S/m; r = 55.516; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Front/1xRTT_RC3 SO32_ch 384/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.573 W/kg Front/1xRTT_RC3 SO32_ch 384/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.054 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.651 W/kg SAR(1 g) = 0.521 W/kg; SAR(10 g) = 0.403 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.582 W/kg 0 dB = 0.582 W/kg = -2.35 dBW/kg Plot No. 17 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/25/2014 CDMA_BC0_LAT Frequency: 848.31 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 848.31 MHz; = 1.016 S/m; r = 55.438; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Edge 4/1xRTT_RC3 SO32_ch 777/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.07 W/kg Edge 4/1xRTT_RC3 SO32_ch 777/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.942 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 1.35 W/kg SAR(1 g) = 0.877 W/kg; SAR(10 g) = 0.571 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.08 W/kg 0 dB = 1.08 W/kg = 0.33 dBW/kg Plot No. 18 Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 6/30/2014 CDMA BC1_LAT Frequency: 1908.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1908.75 MHz; = 1.396 S/m; r = 38.674; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1360; Calibrated: 3/17/2014

- Probe: EX3DV4 - SN3751; ConvF(7.25, 7.25, 7.25); Calibrated: 11/21/2013;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v4.0(A); Type: QD000P40CD; Serial: 1632 RHS/Touch_1xEVDO Rel. 0_ch 1175/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.38 W/kg RHS/Touch_1xEVDO Rel. 0_ch 1175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.432 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 1.76 W/kg SAR(1 g) = 1.18 W/kg; SAR(10 g) = 0.737 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.44 W/kg 0 dB = 1.44 W/kg = 1.58 dBW/kg Plot No. 19 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 6/27/2014 CDMA BC1_UAT Frequency: 1908.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1908.75 MHz; = 1.552 S/m; r = 50.958; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.09, 7.09, 7.09); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 B; Type: SM 000 T01 DA; Serial: TP:1247 Front/1xRTT_RC3 SO32_ch 1175/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.16 W/kg Front/1xRTT_RC3 SO32_ch 1175/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.515 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 2.06 W/kg SAR(1 g) = 0.948 W/kg; SAR(10 g) = 0.452 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.43 W/kg 0 dB = 1.43 W/kg = 1.55 dBW/kg Plot No. 20 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/30/2014 CDMA BC10_UAT Frequency: 820.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 820.5 MHz; = 0.87 S/m; r = 41.464; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.29, 10.29, 10.29); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 ; Type: QD000P40CD; Serial: 1742 LHS/Touch_1xRTT_RC3 SO55_ch 580/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.749 W/kg LHS/Touch_1xRTT_RC3 SO55_ch 580/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.909 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.617 W/kg; SAR(10 g) = 0.410 W/kg Maximum value of SAR (measured) = 0.751 W/kg 0 dB = 0.751 W/kg = -1.24 dBW/kg Plot No. 21 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/1/2014 CDMA BC10_LAT Frequency: 820.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 820.5 MHz; = 0.988 S/m; r = 55.177; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Front/1xRTT_RC3 SO32_ch 580/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.772 W/kg Front/1xRTT_RC3 SO32_ch 580/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.333 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.18 W/kg SAR(1 g) = 0.616 W/kg; SAR(10 g) = 0.363 W/kg Maximum value of SAR (measured) = 0.858 W/kg 0 dB = 0.858 W/kg = -0.67 dBW/kg Plot No. 22 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/1/2014 CDMA BC10_LAT Frequency: 820.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 820.5 MHz; = 0.988 S/m; r = 55.177; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Edge 4/1xRTT_RC3 SO32_ch 580/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.781 W/kg Edge 4/1xRTT_RC3 SO32_ch 580/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 19.402 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.983 W/kg SAR(1 g) = 0.657 W/kg; SAR(10 g) = 0.437 W/kg Maximum value of SAR (measured) = 0.801 W/kg 0 dB = 0.801 W/kg = -0.96 dBW/kg Plot No. 23 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/1/2014 CDMA BC15_LAT Frequency: 1753.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1753.75 MHz; = 1.346 S/m; r = 41.434; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.58, 8.58, 8.58); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM A; Type: SAM; Serial: 1831 RHS/Touch_1xEVDO_Rel. 0_ch 875/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.988 W/kg RHS/Touch_1xEVDO_Rel. 0_ch 875/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.083 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 1.33 W/kg SAR(1 g) = 0.888 W/kg; SAR(10 g) = 0.569 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.08 W/kg 0 dB = 1.08 W/kg = 0.33 dBW/kg Plot No. 24 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/28/2014 CDMA BC15_UAT Frequency: 1711.25 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1711.25 MHz; = 1.466 S/m; r = 52.057; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.26, 8.26, 8.26); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Front/1xRTT_RC3 SO32_ch 25/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.47 W/kg Front/1xRTT_RC3 SO32_ch 25/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 31.689 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.06 W/kg SAR(1 g) = 0.997 W/kg; SAR(10 g) = 0.479 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.34 W/kg 0 dB = 1.34 W/kg = 1.27 dBW/kg Plot No. 25 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/2/2014 CDMA BC15_LAT Frequency: 1753.75 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1753.75 MHz; = 1.496 S/m; r = 51.991; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.26, 8.26, 8.26); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Edge 3/1xRTT_RC3 SO32_ch 875/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.19 W/kg Edge 3/1xRTT_RC3 SO32_ch 875/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.646 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 1.94 W/kg SAR(1 g) = 1.02 W/kg; SAR(10 g) = 0.491 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.41 W/kg 0 dB = 1.41 W/kg = 1.49 dBW/kg Plot No. 26 Test Laboratory: UL Verification Services Inc. SAR Lab C Date: 7/1/2014 LTE Band 2_LAT Frequency: 1880 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1880 MHz; = 1.368 S/m; r = 38.754; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1360; Calibrated: 3/17/2014

- Probe: EX3DV4 - SN3751; ConvF(7.25, 7.25, 7.25); Calibrated: 11/21/2013;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM v4.0(A); Type: QD000P40CD; Serial: 1632 RHS/Touch_QPSK_RB 1/49_ch 18900/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.03 W/kg RHS/Touch_QPSK_RB 1/49_ch 18900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.088 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 0.975 W/kg; SAR(10 g) = 0.600 W/kg Maximum value of SAR (measured) = 1.21 W/kg 0 dB = 1.21 W/kg = 0.83 dBW/kg Plot No. 27 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/3/2014 LTE Band 2_LAT Frequency: 1900 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1900 MHz; = 1.508 S/m; r = 52.509; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(7.88, 7.88, 7.88); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/QPSK_RB 1/49_ch 19100/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.57 W/kg Rear/QPSK_RB 1/49_ch 19100/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.503 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 2.37 W/kg SAR(1 g) = 1.14 W/kg; SAR(10 g) = 0.540 W/kg Maximum value of SAR (measured) = 1.63 W/kg 0 dB = 1.63 W/kg = 2.12 dBW/kg Plot No. 28 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 6/30/2014 LTE Band 4 UAT Frequency: 1720 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1720 MHz; = 1.315 S/m; r = 41.607; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.58, 8.58, 8.58); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM A; Type: SAM; Serial: 1831 RHS/RHS/Touch_QPSK_RB 1/49_Ch 20050/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.23 W/kg RHS/RHS/Touch_QPSK_RB 1/49_Ch 20050/Zoom Scan (5x5x7)/Cube 0: Measurement grid:

dx=8mm, dy=8mm, dz=5mm Reference Value = 27.571 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 2.00 W/kg SAR(1 g) = 0.975 W/kg; SAR(10 g) = 0.510 W/kg Maximum value of SAR (measured) = 1.36 W/kg 0 dB = 1.36 W/kg = 1.34 dBW/kg Plot No. 29 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/1/2014 LTE Band 4 LAT Frequency: 1745 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1745 MHz; = 1.489 S/m; r = 52.026; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(8.26, 8.26, 8.26); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/QPSK_RB 1/49_Ch 20300/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.25 W/kg Rear/QPSK_RB 1/49_Ch 20300/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 29.238 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 2.17 W/kg SAR(1 g) = 1.1 W/kg; SAR(10 g) = 0.532 W/kg Maximum value of SAR (measured) = 1.40 W/kg 0 dB = 1.40 W/kg = 1.46 dBW/kg Plot No. 30 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/24/2014 LTE Band 5_UAT Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.5 MHz; = 0.923 S/m; r = 42.384; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.29, 10.29, 10.29); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM v5.0 ; Type: QD000P40CD; Serial: 1742 RHS/Touch_QPSK_RB 1/24_ch 20525/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.730 W/kg RHS/Touch_QPSK_RB 1/24_ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.081 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.612 W/kg; SAR(10 g) = 0.380 W/kg Maximum value of SAR (measured) = 0.760 W/kg 0 dB = 0.760 W/kg = -1.19 dBW/kg Plot No. 31 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/25/2014 LTE Band 5_LAT Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.5 MHz; = 1.003 S/m; r = 55.516; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Front/QPSK_RB 1/24_ch 20525/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.554 W/kg Front/QPSK_RB 1/24_ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.796 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 0.841 W/kg SAR(1 g) = 0.437 W/kg; SAR(10 g) = 0.250 W/kg Maximum value of SAR (measured) = 0.603 W/kg 0 dB = 0.603 W/kg = -2.20 dBW/kg Plot No. 32 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 6/25/2014 LTE Band 5_LAT Frequency: 836.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 836.5 MHz; = 1.003 S/m; r = 55.516; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Edge 4/QPSK_RB 1/24_ch 20525/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.785 W/kg Edge 4/QPSK_RB 1/24_ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.361 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.984 W/kg SAR(1 g) = 0.638 W/kg; SAR(10 g) = 0.415 W/kg Maximum value of SAR (measured) = 0.790 W/kg 0 dB = 0.790 W/kg = -1.02 dBW/kg Plot No. 33 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/27/2014 LTE Band 13_UAT Frequency: 782 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 782 MHz; = 0.933 S/m; r = 40.101; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(9.2, 9.2, 9.2); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 (A); Type: QD000P40CD; Serial: 1602 LHS/Touch_QPSK_RB 1/24_ch 23230/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.618 W/kg LHS/Touch_QPSK_RB 1/24_ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.671 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.998 W/kg SAR(1 g) = 0.543 W/kg; SAR(10 g) = 0.356 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.629 W/kg 0 dB = 0.629 W/kg = -2.01 dBW/kg Plot No. 34 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/20/2014 LTE Band 13_LAT Frequency: 782 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 782 MHz; = 1 S/m; r = 55.065; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(8.68, 8.68, 8.68); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 Front/QPSK_RB 1/24_ch 23230/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.627 W/kg Front/QPSK_RB 1/24_ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.255 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.908 W/kg SAR(1 g) = 0.528 W/kg; SAR(10 g) = 0.338 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.684 W/kg 0 dB = 0.684 W/kg = -1.65 dBW/kg Plot No. 35 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/21/2014 LTE Band 13_LAT Frequency: 782 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 782 MHz; = 1 S/m; r = 55.065; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(8.68, 8.68, 8.68); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 Edge 4/QPSK_RB 1/24_ch 23230/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.813 W/kg Edge 4/QPSK_RB 1/24_ch 23230/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.948 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.696 W/kg; SAR(10 g) = 0.459 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.851 W/kg 0 dB = 0.851 W/kg = -0.70 dBW/kg Plot No. 36 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/23/2014 LTE Band 17_UAT Frequency: 710 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 710 MHz; = 0.928 S/m; r = 54.389; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(8.68, 8.68, 8.68); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 (A); Type: QD000P40CD; Serial: 1602 RHS/Tilt_QPSK_RB 1/24_ch 23790/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.644 W/kg RHS/Tilt_QPSK_RB 1/24_ch 23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.792 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.473 W/kg; SAR(10 g) = 0.273 W/kg Maximum value of SAR (measured) = 0.587 W/kg 0 dB = 0.587 W/kg = -2.31 dBW/kg Plot No. 37 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/24/2014 LTE Band 17_LAT Frequency: 710 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 710 MHz; = 0.928 S/m; r = 54.389; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(8.68, 8.68, 8.68); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 Front/QPSK_RB 1/24_ch 23790/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.414 W/kg Front/QPSK_RB 1/24_ch 23790/Zoom Scan (8x6x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.124 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.649 W/kg SAR(1 g) = 0.368 W/kg; SAR(10 g) = 0.216 W/kg Maximum value of SAR (measured) = 0.477 W/kg 0 dB = 0.477 W/kg = -3.21 dBW/kg Plot No. 38 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 6/24/2014 LTE Band 17_LAT Frequency: 710 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 710 MHz; = 0.928 S/m; r = 54.389; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(8.68, 8.68, 8.68); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1120 Edge 4/QPSK_RB 1/24_ch 23790/Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.599 W/kg Edge 4/QPSK_RB 1/24_ch 23790/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.088 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 0.769 W/kg SAR(1 g) = 0.516 W/kg; SAR(10 g) = 0.347 W/kg Maximum value of SAR (measured) = 0.626 W/kg 0 dB = 0.626 W/kg = -2.03 dBW/kg Plot No. 39 Test Laboratory: UL Verification Services Inc. SAR Lab H Date: 7/1/2014 LTE Band 25_UAT Frequency: 1905 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 1905 MHz; = 1.408 S/m; r = 39.537; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Averaged Fast SAR: Polynomial fit

- Electronics: DAE4 Sn1258; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3686; ConvF(7.52, 7.52, 7.52); Calibrated: 3/18/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM with CRP v5.0; Type: QD000P40CD; Serial: 1830 RHS/Touch_QPSK_RB 1/49_ch 26590/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.29 W/kg RHS/Touch_QPSK_RB 1/49_ch 26590/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.213 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 2.02 W/kg SAR(1 g) = 0.926 W/kg; SAR(10 g) = 0.491 W/kg Maximum value of SAR (measured) = 1.18 W/kg 0 dB = 1.18 W/kg = 0.72 dBW/kg Plot No. 40 Test Laboratory: UL Verification Services Inc. SAR Lab G Date: 7/3/2014 LTE Band 25_LAT Frequency: 1882.5 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 1882.5 MHz; = 1.496 S/m; r = 52.55; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1434; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3990; ConvF(7.88, 7.88, 7.88); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI A; Type: QDOVA002AA; Serial: 1258 Rear/QPSK_RB 1/49_ch 26365/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.57 W/kg Rear/QPSK_RB 1/49_ch 26365/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.854 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 2.20 W/kg SAR(1 g) = 1.08 W/kg; SAR(10 g) = 0.511 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.38 W/kg 0 dB = 1.38 W/kg = 1.40 dBW/kg Plot No. 41 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/18/2014 LTE Band 26_UAT Frequency: 819 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 819 MHz; = 0.877 S/m; r = 40.977; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(10.29, 10.29, 10.29); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM v5.0 ; Type: QD000P40CD; Serial: 1742 RHS/Touch_QPSK_RB 1/24_ch 26740/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.539 W/kg RHS/Touch_QPSK_RB 1/24_ch 26740/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 24.823 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.847 W/kg SAR(1 g) = 0.464 W/kg; SAR(10 g) = 0.295 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.579 W/kg 0 dB = 0.579 W/kg = -2.37 dBW/kg Plot No. 42 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/18/2014 LTE Band 26_LAT Frequency: 819 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 819 MHz; = 0.993 S/m; r = 56.118; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Rear/QPSK_RB 1/24_ch 26740/Area Scan (9x14x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.253 W/kg Rear/QPSK_RB 1/24_ch 26740/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.153 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 0.328 W/kg SAR(1 g) = 0.227 W/kg; SAR(10 g) = 0.153 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.268 W/kg 0 dB = 0.268 W/kg = -5.72 dBW/kg Plot No. 43 Test Laboratory: UL Verification Services Inc., SAR Lab D Date: 7/19/2014 LTE Band 26_LAT Frequency: 819 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 819 MHz; = 0.993 S/m; r = 56.118; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1433; Calibrated: 4/14/2014

- Probe: EX3DV4 - SN3989; ConvF(9.96, 9.96, 9.96); Calibrated: 4/15/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI A v5.0; Type: QDOVA002AA; Serial: TP:xxxx Edge 4/QPSK_RB 1/24_ch 26740/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.448 W/kg Edge 4/QPSK_RB 1/24_ch 26740/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 21.417 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.564 W/kg SAR(1 g) = 0.370 W/kg; SAR(10 g) = 0.243 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.455 W/kg 0 dB = 0.455 W/kg = -3.42 dBW/kg Plot No. 44 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 7/9/2014 LTE Band 41_UAT Frequency: 2593 MHz; Duty Cycle: 1:1.6; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2593 MHz; = 1.985 S/m; r = 39.494; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(6.42, 6.42, 6.42); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: SAM v5.0 (B); Type: QD000P40CD; Serial: 1628 RHS/Touch_QPSK_RB 1/49_ch 40620/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.05 W/kg RHS/Touch_QPSK_RB 1/49_ch 40620/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 23.731 V/m; Power Drift = -0.13 dB Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = 0.712 W/kg; SAR(10 g) = 0.314 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.01 W/kg 0 dB = 1.01 W/kg = 0.04 dBW/kg Plot No. 45 Test Laboratory: UL Verification Services Inc. SAR Lab A Date: 7/2/2014 LTE Band 41_LAT Frequency: 2680 MHz; Duty Cycle: 1:1.6; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 2680 MHz; = 2.288 S/m; r = 50.27; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1259; Calibrated: 1/23/2014

- Probe: EX3DV4 - SN3772; ConvF(6.15, 6.15, 6.15); Calibrated: 2/26/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1099 Rear/QPSK_RB 1/49_ch 41490/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 1.71 W/kg Rear/QPSK_RB 1/49_ch 41490/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 25.930 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.52 W/kg SAR(1 g) = 1.18 W/kg; SAR(10 g) = 0.406 W/kg Maximum value of SAR (measured) = 1.91 W/kg 0 dB = 1.91 W/kg = 2.81 dBW/kg Plot No. 46 Test Laboratory: UL Verification Services Inc. SAR Lab B Date: 6/21/2014 Wi-Fi 2.4 GHz_Cell Off Frequency: 2462 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2462 MHz; = 1.802 S/m; r = 39.937; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE3 Sn500; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3749; ConvF(6.6, 6.6, 6.6); Calibrated: 1/29/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: SAM; Type: QD000PCD; Serial: 1632 RHS/Touch_802.11b_ch 11/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.33 W/kg RHS/Touch_802.11b_ch 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.843 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 2.34 W/kg SAR(1 g) = 1.15 W/kg; SAR(10 g) = 0.532 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.62 W/kg 0 dB = 1.62 W/kg = 2.10 dBW/kg Plot No. 47 Test Laboratory: UL Verification Services Inc. SAR Lab B Date: 6/20/2014 Wi-Fi 2.4 GHz_Cell off Frequency: 2437 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2437 MHz; = 1.963 S/m; r = 51.432; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE3 Sn500; Calibrated: 5/15/2014

- Probe: EX3DV4 - SN3749; ConvF(6.49, 6.49, 6.49); Calibrated: 1/29/2014;

- Sensor-Surface: 2.5mm (Mechanical Surface Detection)

- Phantom: ELI v5.0 (A); Type: QDOVA001BB; Serial: 1117 Rear/802.11b_ch 6/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.79 W/kg Rear/802.11b_ch 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 28.640 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 2.89 W/kg SAR(1 g) = 1.15 W/kg; SAR(10 g) = 0.479 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.74 W/kg 0 dB = 1.74 W/kg = 2.41 dBW/kg Plot No. 48 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 6/25/2014 Wi-Fi 5 GHz Frequency: 5180 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5180 MHz; = 4.527 S/m; r = 36.522; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1239; Calibrated: 4/15/2014

- Probe: EX3DV4 - SN3885; ConvF(4.92, 4.92, 4.92); Calibrated: 9/18/2013;

- Sensor-Surface: 2mm (Mechanical Surface Detection)

- Phantom: SAM with CRP; Type: SAM; Serial: 1727 RHS/Touch_802.11a_Ch 36/Area Scan (10x18x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.638 W/kg RHS/Touch_802.11a_Ch 36/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 4.779 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 6.14 W/kg SAR(1 g) = 0.458 W/kg; SAR(10 g) = 0.082 W/kg Maximum value of SAR (measured) = 1.08 W/kg 0 dB = 1.08 W/kg = 0.33 dBW/kg Plot No. 49 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 6/23/2014 Wi-Fi 5 GHz Frequency: 5785 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5785 MHz; = 5.11 S/m; r = 35.628; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1239; Calibrated: 4/15/2014

- Probe: EX3DV4 - SN3885; ConvF(4.4, 4.4, 4.4); Calibrated: 9/18/2013;

- Sensor-Surface: 2mm (Mechanical Surface Detection)

- Phantom: SAM with CRP; Type: SAM; Serial: 1727 RHS/Tilt_802.11a_Ch 157/Area Scan (10x18x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.878 W/kg RHS/Tilt_802.11a_Ch 157/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.509 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 6.80 W/kg SAR(1 g) = 0.490 W/kg; SAR(10 g) = 0.102 W/kg Maximum value of SAR (measured) = 1.23 W/kg 0 dB = 1.23 W/kg = 0.90 dBW/kg Plot No. 50 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 7/1/2014 Wi-Fi 5 GHz Frequency: 5260 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5260 MHz; = 4.626 S/m; r = 34.618; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1357; Calibrated: 2/17/2014

- Probe: EX3DV4 - SN3901; ConvF(4.63, 4.63, 4.63); Calibrated: 2/25/2014;

- Sensor-Surface: 2mm (Mechanical Surface Detection)

- Phantom: SAM with CRP; Type: SAM;

RHS/Touch_802.11a_Ch 52/Area Scan (10x18x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.942 W/kg RHS/Touch_802.11a_Ch 52/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 9.689 V/m; Power Drift = 0.13 dB Peak SAR (extrapolated) = 3.79 W/kg SAR(1 g) = 0.403 W/kg; SAR(10 g) = 0.085 W/kg Maximum value of SAR (measured) = 0.899 W/kg 0 dB = 0.899 W/kg = -0.46 dBW/kg Plot No. 51 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 6/28/2014 Wi-Fi 5 GHz Frequency: 5620 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5620 MHz; = 5.117 S/m; r = 36.387; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1357; Calibrated: 2/17/2014

- Probe: EX3DV4 - SN3901; ConvF(4.45, 4.45, 4.45); Calibrated: 2/25/2014;

- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm

(Mechanical Surface Detection)

- Phantom: SAM with CRP; Type: SAM;

RHS/Touch_802.11a_Ch 124/Area Scan (10x18x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.10 W/kg RHS/Touch_802.11a_Ch 124/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 9.760 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 4.09 W/kg SAR(1 g) = 0.467 W/kg; SAR(10 g) = 0.100 W/kg Maximum value of SAR (measured) = 1.15 W/kg 0 dB = 1.15 W/kg = 0.61 dBW/kg Plot No. 52 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 6/30/2014 Wi-Fi 5 GHz Frequency: 5240 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5240 MHz; = 5.418 S/m; r = 47.647; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1239; Calibrated: 4/15/2014

- Probe: EX3DV4 - SN3885; ConvF(4.27, 4.27, 4.27); Calibrated: 9/18/2013;

- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Front/802.11a_Ch 48/Area Scan (13x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.623 W/kg Front/802.11a_Ch 48/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.335 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.59 W/kg SAR(1 g) = 0.367 W/kg; SAR(10 g) = 0.110 W/kg Maximum value of SAR (measured) = 0.726 W/kg 0 dB = 0.726 W/kg = -1.39 dBW/kg Plot No. 53 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 6/30/2014 Wi-Fi 5 GHz Frequency: 5260 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5260 MHz; = 5.433 S/m; r = 47.658; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1239; Calibrated: 4/15/2014

- Probe: EX3DV4 - SN3885; ConvF(4.05, 4.05, 4.05); Calibrated: 9/18/2013;

- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Front/802.11a_Ch 52/Area Scan (13x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.676 W/kg Front/802.11a_Ch 52/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.944 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 1.65 W/kg SAR(1 g) = 0.395 W/kg; SAR(10 g) = 0.125 W/kg Maximum value of SAR (measured) = 0.774 W/kg 0 dB = 0.774 W/kg = -1.11 dBW/kg Plot No. 54 Test Laboratory: UL Verification Services Inc. SAR Lab F Date: 6/23/2014 Wi-Fi 5 GHz Frequency: 5785 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 25.0C; Liquid Temperature: 24.0C Medium parameters used: f = 5785 MHz; = 6.13 S/m; r = 46.798; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1239; Calibrated: 4/15/2014

- Probe: EX3DV4 - SN3885; ConvF(3.86, 3.86, 3.86); Calibrated: 9/18/2013;

- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 (B); Type: QDOVA001BB; Serial: 1118 Front/802.11a_Ch 157/Area Scan (13x21x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.708 W/kg Front/802.11a_Ch 157/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 10.698 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 1.80 W/kg SAR(1 g) = 0.385 W/kg; SAR(10 g) = 0.116 W/kg Maximum value of SAR (measured) = 0.790 W/kg 0 dB = 0.790 W/kg = -1.02 dBW/kg Plot No. 55 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 7/17/2014 Wi-Fi 5 GHz Frequency: 5620 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5620 MHz; = 5.941 S/m; r = 47.693; = 1000 kg/m3 DASY5 Configuration:

- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg

- Electronics: DAE4 Sn1357; Calibrated: 2/17/2014

- Probe: EX3DV4 - SN3901; ConvF(3.74, 3.74, 3.74); Calibrated: 2/25/2014;

- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm

(Mechanical Surface Detection)

- Phantom: ELI v5.0 A; Type: QD OVA 002 AA; Serial: 1180 Front/802.11a_Ch 124/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.680 W/kg Front/802.11a_Ch 124/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 8.456 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 1.74 W/kg SAR(1 g) = 0.395 W/kg; SAR(10 g) = 0.104 W/kg Maximum value of SAR (measured) = 0.812 W/kg 0 dB = 0.812 W/kg = -0.90 dBW/kg Plot No. 56

 

 

Head Tissue Simulating Liquids Parameters according to IEEE Std 1528-2013 / IEC 62209 / FCC KDB 865664 D01 Head Tissue Narrow-

Band Solutions

(5%

tolerance) Product HSL300V2 HSL450V2 HSL750V2 HSL900V2 HSL1450V2 HSL1750V2 HSL1800V2 HSL1900V2 HSL1950V2 HSL2450V2 Broad-

Band Solutions

(5%

tolerance) Product HBBL30-250V3 HBBL1350-1850V3 HBBL1550-1950V3 HBBL1900-3800V3 HBBL3500-5800V5 Test Frequency (MHz) 300 450 750 835, 900 1450, 1500, 1640 1750 1800, 1900 1900 1950, 2000 2450, 2600 Test Frequency (MHz) 30-250 1400-1800 1750-1900 1950-3000 3500-5800 Main Ingredients Water, Sugar Water, Sugar Water, Sugar Water, Sugar Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Main Ingredients Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil Body Tissue Simulating Liquids Parameters according to FCC KDB 865664 D01 Product MSL300V2 MSL450V2 MSL750V2 MSL900V2 MSL1450V2 MSL1750V2 MSL1800V2 MSL1900V2 MSL1950V2 MSL2450V2 Product Test Frequency (MHz) Main Ingredients 300 400, 450 750 835, 900 1450, 1500, 1640 1750 1800, 1900 1900 1950, 2100 2450, 2600 Water, Sugar Water, Sugar Water, Sugar Water, Sugar Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Water, DGBE Test Frequency (MHz) Main Ingredients MBBL130-250V3 MBBL1350-1850V3 MBBL1550-1950V3 MBBL1900-3800V3 MBBL3500-5800V5 130-250 1350-1800 1550-1850 1950-3800 3500-5800 Water, Tween Water, Tween Water, Tween Water, Tween Water, Oil Body Tissue

(Muscle) Narrow-

Band Solutions

(5%

tolerance) Broad-

Band Solutions

(5%

tolerance)

 

 

 

 

 

 

 

 

 

 

Report No.: 14U17673 Model: A1586 & A1549 DUT and SAR Set-up Photos Overall Dimensions 67 mm Earpiece 138.1 mm 120 mm 147 mm Report No.: 14U17673 Front View of the DUT Model: A1586 & A1549 Rear View of the DUT Report No.: 14U17673 Model: A1586 & A1549 Setup Photos Handset Vertical and Horizontal Reference Lines Vertical Center Line Horizontal Line Report No.: 14U17673 Model: A1586 & A1549 Head Exposure Conditions Left Touch Left Tilt (15) Report No.: 14U17673 Right Touch Model: A1586 & A1549 Right Tilt (15) Report No.: 14U17673 Model: A1586 & A1549 Body-worn Accessory & Hotspot mode Exposure Conditions Rear Front Report No.: 14U17673 Model: A1586 & A1549 Hotspot Exposure Conditions Edge 1 Edge 2 Report No.: 14U17673 Edge 3 Model: A1586 & A1549 Edge 4

 

 

December 13, 2012 Authorized Individual Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Date:

Subject:

To Whom It May Concern:

Pursuant to the provisions of KDB 852134 D01 Authorized Policy Form 731, I, grantee contact, hereby authorize Tiberiu Muresan to act on behalf of Apple Inc. for all matters relating to equipment authorization, including signing Form 731, attestations, and confidentiality request letters. This authorized individual may also assign another party to act as an authorized agent. This authorization is valid until further written notice from the grantee contact. Marc Douat Apple Inc. 1 Infinite Loop Cupertino, CA 95014

 

 

 

 

 

 

REPORT NO: 14U17673-E4C FCC ID: BCG-E2816A 12. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO DATE: AUGUST 02, 2014 IC: 579C-E2816 RADIATED RF MEASUREMENT SETUP X POSITION PHOTO UL Verification Services FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services. Page 33 of 35 TEL: (510) 771-1000 REPORT NO: 14U17673-E4C FCC ID: BCG-E2816A Y POSITION PHOTO DATE: AUGUST 02, 2014 IC: 579C-E2816 Z POSITION PHOTO UL Verification Services FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services. Page 34 of 35 TEL: (510) 771-1000 REPORT NO: 14U17673-E4C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816 POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO END OF REPORT UL Verification Services FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services. Page 35 of 35 TEL: (510) 771-1000

 

 

 

 

 

 

REPORT NO: 14U17673-E6C FCC ID: BCG-E2816A 12. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO DATE: AUGUST 02, 2014 Page 89 of 94 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E6C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) DATE: AUGUST 02, 2014 RADIATED FRONT PHOTO (BELOW 1 GHz) RADIATED BACK PHOTO (BELOW 1 GHz) Page 90 of 94 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E6C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) DATE: AUGUST 02, 2014 RADIATED FRONT PHOTO (ABOVE 1 GHz) RADIATED BACK PHOTO (ABOVE 1 GHz) Page 91 of 94 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E6C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION DATE: AUGUST 02, 2014 X-AXIS PHOTO Y-AXIS PHOTO Page 92 of 94 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E6C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Z-AXIS PHOTO Page 93 of 94 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E6C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO END OF REPORT Page 94 of 94 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

 

 

 

 

 

 

REPORT NO: 14U17673-E3C FCC ID: BCG-E2816A 12. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO DATE: AUGUST 02, 2014 IC: 579C-E2816A RADIATED RF MEASUREMENT SETUP X POSITION PHOTO UL Verification Services FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services. Page 52 of 54 TEL: (510) 771-1000 REPORT NO: 14U17673-E3C FCC ID: BCG-E2816A Y POSITION PHOTO DATE: AUGUST 02, 2014 IC: 579C-E2816A Z POSITION PHOTO UL Verification Services FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services. Page 53 of 54 TEL: (510) 771-1000 REPORT NO: 14U17673-E3C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 IC: 579C-E2816A POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO END OF REPORT UL Verification Services FORM NO: CCSUP4701D 47173 BENICIA STREET, FREMONT, CA 94538, USA FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services. Page 54 of 54 TEL: (510) 771-1000

 

 

 

 

 

 

 

 

 

 

REPORT NO: 14U17673-E5C FCC ID: BCG-E2816A 12. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO DATE: AUGUST 03, 2014 Page 161 of 166 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E5C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) DATE: AUGUST 03, 2014 RADIATED FRONT PHOTO (BELOW 1 GHz) RADIATED BACK PHOTO (BELOW 1 GHz) Page 162 of 166 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E5C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) DATE: AUGUST 03, 2014 RADIATED FRONT PHOTO (ABOVE 1 GHz) RADIATED BACK PHOTO (ABOVE 1 GHz) Page 163 of 166 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E5C FCC ID: BCG-E2816A RADIATED RF MEASUREMENT SETUP FOR PORTABLE CONFIGURATION DATE: AUGUST 03, 2014 X-AXIS PHOTO Y-AXIS PHOTO Page 164 of 166 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E5C FCC ID: BCG-E2816A DATE: AUGUST 03, 2014 Z-AXIS PHOTO Page 165 of 166 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E5C FCC ID: BCG-E2816A DATE: AUGUST 03, 2014 POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO END OF REPORT Page 166 of 166 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.

 

 

FCC 47 CFR PART 15 SUBPART E INDUSTRY CANADA RSS-210 ISSUE 8 CERTIFICATION TEST REPORT FOR CELLULAR PHONE WITH BLUETOOTH AND WLAN RADIOS MODEL NUMBER: A1549 FCC ID: BCG-E2816A REPORT NUMBER: 14U17673-E10, REVISION C ISSUE DATE: AUGUST 02, 2014 Prepared for APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A Revision History DATE: AUGUST 02, 2014 Rev.

--

A B C Issue Date 7/21/14 7/23/14 7/29/14 08/02/14 Revisions Initial Issue Update Product Description Update product description, section 5.2, 5.5, 5.6, and 10 Address TCB Questions Revised By F. deAnda M. Hua D. Garcia T. Lee UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 2 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A TABLE OF CONTENTS DATE: AUGUST 02, 2014 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6 4.2. SAMPLE CALCULATION ............................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 7 5. EQUIPMENT UNDER TEST ............................................................................................... 8 5.1. DESCRIPTION OF EUT .............................................................................................. 8 5.2. MAXIMUM OUTPUT POWER...................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 8 5.4. SOFTWARE AND FIRMWARE .................................................................................... 8 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 9 5.6. DESCRIPTION OF TEST SETUP ...............................................................................10 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................14 7. MEASUREMENT METHODS ............................................................................................15 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS ...........................................16 8.1. ON TIME AND DUTY CYCLE RESULTS ....................................................................16 9. ANTENNA PORT TEST RESULTS ...................................................................................16 10.1. 10.2. 10. RADIATED TEST RESULTS .........................................................................................17 LIMITS AND PROCEDURE .....................................................................................17 TRANSMITTER ABOVE 1 GHz ...............................................................................18 TX ABOVE 1 GHz 802.11a MODE IN THE 5.2 GHz BAND ..............................18 10.2.1. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.2 GHz BAND ....................26 10.2.2. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.2 GHz BAND ....................34 10.2.3. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.2 GHz BAND .....................40 10.2.4. TX ABOVE 1 GHz 802.11a MODE IN THE 5.3 GHz BAND ..............................44 10.2.5. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.3 GHz BAND ....................52 10.2.6. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.3 GHz BAND ....................60 10.2.7. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.3 GHz BAND .....................66 10.2.8. 10.2.9. TX ABOVE 1 GHz 802.11a MODE IN THE 5.6 GHz BAND ..............................70 10.2.10. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.6 GHz BAND ....................79 10.2.11. TX ABOVE 1 GHz 802.11n HT20 MODE, CHANNEL 144, 5.6 GHz BAND ......88 10.2.12. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.6 GHz BAND ....................91 10.2.13. TX ABOVE 1 GHz 802.11n HT40 MODE, CHANNEL 142, 5.6 GHz BAND .... 100 10.2.14. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.6 GHz BAND ................... 103 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 3 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.15. TX ABOVE 1 GHz 802.11n ac80 MODE, CHANNEL 138, 5.6 GHz BAND ..... 107 10.2.16. TX ABOVE 1 GHz 802.11a MODE IN THE 5.8 GHz BAND ............................ 110 10.2.17. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.8 GHz BAND .................. 118 10.2.18. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.8 GHz BAND .................. 126 10.2.19. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.8 GHz BAND ................... 132 10.3. WORST-CASE BELOW 1 GHz ............................................................................. 136 10.4. WORST-CASE 18 to 26 GHz ................................................................................ 138 10.5. WORST-CASE 26 to 40 GHz ................................................................................ 142 11. AC POWER LINE CONDUCTED EMISSIONS ............................................................ 146 12. DYNAMIC FREQUENCY SELECTION ........................................................................ 150 SETUP PHOTOS ......................................................................................................... 151 13. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 4 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 APPLE, INC. 1 INFINITE LOOP CUPERTINO, CA 95014, U.S.A. 1. ATTESTATION OF TEST RESULTS COMPANY NAME:

EUT DESCRIPTION:

MODEL:

SERIAL NUMBER:

DATE TESTED:

A1549 MAY 1, 2014 JUNE 12, 2014 CELLULAR PHONE WITH BLUETOOTH AND WLAN RADIOS C39MF01KFY6W - Conducted, C39MD06FFY70 Radiated APPLICABLE STANDARDS STANDARD CFR 47 Part 15 Subpart E INDUSTRY CANADA RSS-210 Issue 8 Annex 9 INDUSTRY CANADA RSS-GEN Issue 3 TEST RESULTS Pass Pass Pass UL Verification Services Inc. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By:

Tested By:

FRANCISCO DE ANDA PROJECT LEAD UL VERIFICATION SERVICES INC. MONA HUA EMC ENGINEER UL VERIFICATION SERVICES INC. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 5 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with FCC CFR 47 Part 2, FCC CFR 47 Part 15, FCC 06-96, FCC KDB 789033 and ANSI C63.10-2009. Per FCC guidance, radiated tests are performed for A1549 to ensure that there is no deviation in EM fields between Model A1549 and Model A1586. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address. The following table identifies which facilities were utilized for radiated emission measurements documented in this report. Specific facilities are also identified in the test results sections. 47173 Benicia Street 47266 Benicia Street Chamber A Chamber B Chamber C Chamber D Chamber E Chamber F Chamber G Chamber H UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. 4.2. SAMPLE CALCULATION Where relevant, the following sample calculation is provided:

Field Strength (dBuV/m) = Measured Voltage (dBuV) + Antenna Factor (dB/m) +

Cable Loss (dB) Preamp Gain (dB) 36.5 dBuV + 18.7 dB/m + 0.6 dB 26.9 dB = 28.9 dBuV/m UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 6 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 4.3. MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus:

PARAMETER UNCERTAINTY Conducted Disturbance, 0.15 to 30 MHz Radiated Disturbance, 30 to 1000 MHz 3.52 dB 4.94 dB Uncertainty figures are valid to a confidence level of 95%. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 7 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 5. EQUIPMENT UNDER TEST 5.1. DESCRIPTION OF EUT Model A1549 is a mobile phone with multimedia functions (music, application support, and video), Cellular GSM/GPRS/EGPRS/CDMA2000/EVDO Rev.A/ EVDO Rev.B

/WCDMA/HSPA+/DC-HSDPA/LTE FDD & Carrier Aggregation radio, IEEE 802.11a/b/g/n/ac radio, Bluetooth radio and NFC. The rechargeable battery is not user accessible. 5.2. MAXIMUM OUTPUT POWER For Maximum power data, refer to Model A1586 FCC UNII WLAN report. 5.3. DESCRIPTION OF AVAILABLE ANTENNAS The radio utilizes a PiFA antenna, with a maximum gain as below table:

FREQUENCY (MHZ) ANTENNA GAIN ( dBi) 5150 -- 5250 5250 -- 5350 5500 -- 5700 5725 -- 5850

-3.96

-3.49

-1.36

-1.4 5.4. SOFTWARE AND FIRMWARE The firmware installed in the EUT during testing was 7.16.121 The test utility software used during testing was wl 7.16 RC121.0. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 8 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 5.5. WORST-CASE CONFIGURATION AND MODE DATE: AUGUST 02, 2014 Radiated emission and power line conducted emission were performed with the EUT set to transmit at the channel with highest output power as worst-case scenario. The fundamental of the EUT was investigated in three orthogonal orientations X (Flatbed), Y

(Landscape), Z (Portrait), it was determined that Y orientation was worst-case orientation;

therefore, all final radiated testing was performed with the EUT in Y (Landscape) orientation. Worst-case data rates as provided by the client were:

802.11a mode: 6 Mbps 802.11n HT20mode: MCS0 802.11n HT40mode: MCS0 802.11n AC80mode: MCS0 Radiated emissions for EUT with antenna was performed and passed; therefore, antenna port spurious was not performed. Radiated spurious emissions were performed with the EUT set to transmit at the channel with the highest output power as worst case scenario. There are three vendors of the WiFi/Bluetooth radio modules: variant 1, variant 2 and variant 3 and they have the same mechanical outline, same on board antenna, matching circuit, antenna structure and same specification. Baseline testing was performed on all three variants to determine the worst case on all conducted power and radiated emissions. UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA Page 9 of 158 TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 5.6. DESCRIPTION OF TEST SETUP DATE: AUGUST 02, 2014 SUPPORT EQUIPMENT Description Manufacturer Model Support Equipment List AC/DC adapter Earphone Laptop Apple Apple Apple I/O CABLES (CONDUCTED TEST) A1401 NA A1278 I/O Cable List Serial Number 60812 FCC ID NA NA C02HJ0A7DTY4 NA NA Port Cable No

# of identical ports Connector Type Cable Type Cable Length (m) Remarks 1 2 Antenna USB 1 1 SMA USB Un-Shielded Shielded 0.1 1m to spectrum Analyzer To EUT I/O CABLES (RADIATED ABOVE 1 GHZ) I/O Cable List

# of identical ports Connector Type Cable Type Cable Length (m) Remarks Port Cable No None used I/O CABLES (BELOW 1GHZ & AC LINE CONDUCTED TESTS) I/O Cable List Port Cable No

# of identical ports Connector Type Cable Type Cable Length (m) Remarks 1 2 3 AC DC Audio 1 1 1 US115 USB Jack Un-Shielded Un-Shielded Un-Shielded 80cm 1m 0.5m NA NA NA Page 10 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 TEST SETUP- CONDUCTED PORT The EUT was tested connected to a host Laptop via USB cable adapter and spectrum analyzer to antenna port. Test software exercised the EUT. SETUP DIAGRAM 1 EUT 2 Spectrum Analyser Laptop #1 AC Source Page 11 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A TEST SETUP- RADIATED-ABOVE 1 GHZ The EUT was tested battery powered. Test software exercised the EUT. DATE: AUGUST 02, 2014 SETUP DIAGRAM EUT AC Source Page 12 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 TEST SETUP- BELOW 1GHZ & AC LINE CONDUCTED TESTS The EUT was tested with earphones connected and powered by AC adapter. Test software exercised the EUT. SETUP DIAGRAM EUT Earphones 3 2 AC Adapter 1 AC Source Page 13 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 6. TEST AND MEASUREMENT EQUIPMENT The following test and measurement equipment was utilized for the tests documented in this report:

DATE: AUGUST 02, 2014 TEST EQUIPMENT LIST Description Antenna, Horn, 18 GHz Antenna, Horn, 26.5 GHz Antenna, Horn, 40 GHz Peak / Average Power Sensor Peak Power Meter Spectrum Analyzer, 44 GHz Antenna, Bilog, 2 GHz Preamplifier, 1300 MHz Preamplifier, 26.5 GHz Preamplifier, 40 GHz EMI Test Receiver, 9 kHz-7 GHz LISN, 30 MHz Manufacturer ETS Lindgren ARA ARA Agilent / HP Agilent / HP Agilent / HP Sunol Sciences Sonoma Agilent / HP Model 3117 MWH-1826 MWH-2640 N1911A E9323A N9030A JB1 310 8449B Miteq R & S FCC NSP4000-SP2 ESCI 7 LISN-50/250-25-2 Asset F00131 C00589 C00981 F00153 F00025 F00129 F00168 F00008 F00165 C00990 F00092 C00626 Cal Due 02/18/15 11/26/14 06/28/14 03/06/15 04/30/15 02/22/15 03/28/15 05/27/15 03/25/15 08/20/14 09/05/14 01/14/15 Page 14 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 7. MEASUREMENT METHODS 26 dB Emission BW: KDB 789033 D02 v01, Section C. 99% Occupied BW: KDB 789033 D02 v01, Section D. Power and PSD: KDB 789033 D02 v01, Method SA-1 and SA-1 Alternative. Power Spectral Density: KDB 789033 D02 v01, Section F. Unwanted emissions in restricted bands: KDB 789033 D02 v01, Sections G.3, G.4, G.5, and G.6. Unwanted emissions in non-restricted bands: KDB 789033 D02 v01, Sections G.3, G.4, and G.5. Page 15 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 8. ON TIME, DUTY CYCLE AND MEASUREMENT METHODS DATE: AUGUST 02, 2014 LIMITS None; for reporting purposes only. PROCEDURE KDB 789033 Zero-Span Spectrum Analyzer Method. 8.1. ON TIME AND DUTY CYCLE RESULTS For on time and duty cycle data, refer to Model A1586 FCC UNII WLAN report. 9. ANTENNA PORT TEST RESULTS For conducted port data, refer to Model A1586 FCC UNII WLAN report. Page 16 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10. RADIATED TEST RESULTS 10.1. LIMITS AND PROCEDURE LIMITS FCC 15.205 and 15.209 Frequency Range

(MHz) 30 - 88 88 - 216 216 - 960 Above 960 Field Strength Limit

(uV/m) at 3 m Field Strength Limit

(dBuV/m) at 3 m 100 150 200 500 40 43.5 46 54 TEST PROCEDURE The EUT is placed on a non-conducting table 80 cm above the ground plane. The antenna to EUT distance is 3 meters. For measurements below 1 GHz the resolution bandwidth is set to 100 kHz for peak detection measurements or 120 kHz for quasi-peak detection measurements. Peak detection is used unless otherwise noted as quasi-peak. For measurements above 1 GHz the resolution bandwidth is set to 1 MHz; the video bandwidth is set to 1 MHz for peak measurements and as applicable for average measurements. The spectrum from 30 MHz to 40 GHz is investigated with the transmitter set to the lowest, middle, and highest channels in each applicable band. The frequency range of interest is monitored at a fixed antenna height and EUT azimuth. The EUT is rotated through 360 degrees to maximize emissions received. The antenna is scanned from 1 to 4 meters above the ground plane to further maximize the emission. Measurements are made with the antenna polarized in both the vertical and the horizontal positions. Per FCC guidance, radiated tests are performed to ensure there is no deviation in EM fields between Model A1549 and Model A1586. Page 17 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10.2. TRANSMITTER ABOVE 1 GHz DATE: AUGUST 02, 2014 10.2.1. TX ABOVE 1 GHz 802.11a MODE IN THE 5.2 GHz BAND RESTRICTED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 18 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A LOW CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 19 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 36 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 36 Page 20 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 4.693 41.91 PK1

* 4.703 30.68 AD1

* 4.335 41.64 PK1

* 4.33 30.18 AD1

* 5.424 42.08 PK1

* 5.418 30.95 AD1

* 5.372 42.69 PK1

* 5.38 31.1 AD1 5.486 31.24 AD1 5.491 42.4 PK1 5.851 31.23 AD1 5.853 43.22 PK1 34.2 34.2 33.6 33.6 34.6 34.6 34.5 34.5 34.6 34.6 35 35

(dBuV/m) 46.31 34.88 44.34 33.18 55.58 44.45 55.89 44.3 45.14 56.3 45.93 57.92

-29.8

-30

-30.9

-30.6

-21.1

-21.1

-21.3

-21.3

-20.7

-20.7

-20.3

-20.3

-

54

-

54

-

54

-

54

-

-

-

-

-

-19.12

-

-20.82

-

-9.55

-

-9.7

-

-

-

-

74

-

74

-

74

-

74

-

-

-

-

-

-27.69

-

-29.66

-

-18.42

-

-18.11

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-11.9

-

-

68.2

-10.28 3 3 82 82 86 86 331 331 253 253 12 12 174 174 354 354 369 369 261 261 379 379 227 227 H H V V H H V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 21 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 40 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 40 Page 22 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346

(dB/m) Amp/Cbl/Fltr

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.802 42.23 PK1

* 3.807 30.8 AD1

* 5.061 43 PK1

* 5.067 31.91 AD1

* 4.756 42.8 PK1

* 4.752 31.27 AD1

* 5.402 42.5 PK1

* 5.407 31.07 AD1 2.436 30.69 AD1 2.439 43.43 5.557 42.62 PK1 PK1 5.56 31.37 AD1 33.4 33.4 34.1 34.1 34.1 34.1 34.6 34.6 32.1 32.2 34.5 34.5

-31.9

-31.9

-28.2

-28.1

-30.6

-30.6

-21.1

-21.1

-33.1

-33.1

-20.8

-20.8 43.73 32.3 48.9 37.91 46.3 34.77 56 44.57 29.69 42.53 56.32 45.07

-

54

-

54

-

54

-

54

-

-

-

-

-

-21.7

-

-16.09

-

-19.23

-

-9.43

-

-

-

-

74

-

74

-

74

-

74

-

-

-

-

-

-30.27

-

-25.1

-

-27.7

-

-18

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2 68.2

-

-

-

-

-

-

-

-

-

-

-25.67

-11.88

-

168 168 204 204 111 111 338 338 143 143 54 54 172 172 144 144 112 112 209 209 392 392 142 142 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 23 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 48 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 48 Page 24 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr/

(dB/m) Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 5.107 44.41 PK1 34.2

-21.6 57.01

* 5.104 32.94 AD1 34.2

-21.6 45.54 2.435 42.93 PK1 32.1

-33.1 41.93 2.437 30.78 AD1 32.1

-33.1 29.78 2.44 42.3 PK1 32.2 2.441 30.57 AD1 32.2

-33

-33 41.5 29.77 4.461 41.67 PK1 33.8

-30.4 45.07 4.462 30.24 AD1 33.8

-30.4 33.64 5.73 42.83 PK1 34.8

-20.7 56.93 5.737 31.68 AD1 34.9

-20.8 45.78 5.903 42.74 PK1 35.1

-20.3 57.54 5.913 31.4 AD1 35.1

-20.4 46.1

-

54

-

-

-

-

-

-

-

-

-

-

-

74

-16.99

-8.46

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-26.27

-

-

68.2

-26.7

-

-

68.2

-23.13

-

-

68.2

-11.27

-

-

68.2

-10.66

-

-

4 4 0 0 21 21 215 215 197 197 323 323 297 297 210 210 202 202 298 298 116 116 186 186 V V H H V V V V V V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 25 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.2. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.2 GHz BAND RESTRICTED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 26 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A LOW CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 27 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 36 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 36 Page 28 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.781 43.13 PK1

* 3.781 31.28 AD1

* 1.295 44.56 PK1

* 1.295 32.52 AD1

* 9.316 37.64 PK1 33.4 33.4 28.9 28.9 36.7

-32

-32 44.53 32.68

-34.2 39.26

-34.2 27.22

-25.5 48.84

* 9.316 25.7 AD1 36.7

-25.5 36.9

* 8.406 38.44 PK1

* 8.406 27.43 AD1 4.468 42.42 PK1 6.414 41.5 PK1 35.9 35.9 33.9 35.6

-26.9 47.44

-26.9 36.43

-30.3 46.02

-29.1 48

-

54

-

54

-

54

-

54

-

-

-

-21.32

-

-26.78

-

-17.1

-

-17.57

-

-

74

-

74

-

74

-

74

-

-

-

-29.47

-

-34.74

-

-25.16

-

-26.56

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2 68.2

-22.18

-20.2 2 2 2 2 2 2 2 2 2 2 101 101 101 101 101 101 101 101 101 101 H H V V V V V V V H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 29 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 40 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 40 Page 30 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346

(dB/m) Amp/Cbl/Fltr

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.737 42.06 PK1

* 4.737 30.53 AD1

* 1.353 43.95 PK1

* 1.353 32.5 AD1

* 3.885 42.03 PK1

* 3.885 30.48 AD1

* 7.672 39.15 PK1

* 7.672 27.54 AD1 6.53 39.87 PK1 10.372 36.3 PK1 34.1 34.1 28.9 28.9 33.5 33.5 35.8 35.8 35.7 37.4

-30.6 45.56

-30.6 34.03

-33.9 38.95

-33.9 27.5

-30.4 45.13

-30.4 33.58

-27.3 47.65

-27.3 36.04

-27.7 47.87

-23.7 50

-

54

-

54

-

54

-

54

-

-

-

-19.97

-

-26.5

-

-20.42

-

-17.96

-

-

74

-

74

-

74

-

74

-

-

-

-28.44

-

-35.05

-

-28.87

-

-26.35

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2 68.2

-20.33

-18.2 0 0 0 0 0 0 0 0 0 0 101 101 101 101 101 101 101 101 101 101 H H V V V V V V H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 31 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 48 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 48 Page 32 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr/

(dB/m) Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity 2.519 42.48 PK1 32.4

-32 42.88 2.653 42.45 PK1 32.5

-32.8 42.15 6.557 39.43 PK1 35.7

-27.9 47.23 8.948 38.19 PK1 36.3

-26 48.49 9.764 38.11 PK1 37.1

-24.9 50.31 14.412 38.29 PK1 39.2

-24.9 52.59

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-25.32 360 100 68.2

-26.05 360 100 68.2

-20.97 360 100 68.2

-19.71 360 100 68.2

-17.89 360 100 68.2

-15.61 360 100 H V H H V V PK1 - KDB789033 Method: Peak Page 33 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.3. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.2 GHz BAND RESTRICTED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 34 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A LOW CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 35 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 38 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 38 Page 36 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.894 41.81 PK1 33.5

-30.4 44.91

* 3.894 30.47 AD1 33.5

-30.4 33.57

* 8.41 39.02 PK1 35.9

-26.9 48.02

* 8.41 27.49 AD1 35.9

-26.9 36.49

* 7.655 39.44 PK1 35.8

-27.3 47.94

* 7.655 27.62 AD1 35.8

-27.3 36.12

* 11.825 35.94 PK1 38.5

-23.2 51.24

* 11.825 25.06 AD1 38.5

-23.2 40.36 4.468 41.65 PK1 33.9

-30.3 45.25 4.468 30.38 AD1 33.9

-30.3 33.98 13.617 38.54 PK1 38.9

-24.6 52.84

-

54

-

54

-

54

-

54

-

-

-

-

-20.43

-

-17.51

-

-17.88

-

-13.64

-

-

-

74

-

74

-

74

-

74

-

-

-

-

-29.09

-

-25.98

-

-26.06

-

-22.76

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-22.95

-

-

68.2

-15.36 0 0 0 0 0 0 0 0 0 0 0 101 101 101 101 101 101 101 101 101 101 101 H H H H V V V V V V H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 37 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 46 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 46 Page 38 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.655 42.02 PK1 34.1

-29.7 46.42

* 4.655 30.51 AD1 34.1

-29.7 34.91

* 3.882 41.89 PK1 33.5

-30.5 44.89

* 3.882 30.6 AD1 33.5

-30.5 33.6

* 12.452 37.14 PK1 38.9

-23.6 52.44

* 12.452 25.26 AD1 38.9

-23.6 40.56 2.526 42.13 PK1 32.4

-32 42.53 6.924 40 PK1 35.9

-28.4 47.5 8.563 38.15 PK1 35.9

-26.3 47.75

-

54

-

54

-

54

-

-

-

-

-19.09

-

-20.4

-

-13.44

-

-

-

74

-

74

-

74

-

-

-

-

-27.58

-

-29.11

-

-21.56

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-25.67 68.2

-20.7 68.2

-20.45 0 0 0 0 0 0 0 0 0 101 101 101 101 101 101 101 101 101 H H V V V V H V H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 39 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.4. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.2 GHz BAND RESTRICTED BANDEDGE (LOW CHANNEL, CH 42) LOW CHANNEL RESTRICTED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 40 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED, PEAK, VERT LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 41 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 42 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 42 Page 42 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 PK Margin

(dB) Azimu th

(Degs) Heig ht

(cm) Polari ty UNII Non-

Restric ted

(dBuV/

m)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

248 248 38 38 221 221 278 278 351 351 320 139 139 160 160 269 269 285 285 133 133 371 371 H H H H V V V V V V H H 68.2

-21.49 320 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Mark er Freque ncy

(GHz) Meter Readi ng

(dBuV

) Det AF T346

(dB/

m) Amp/C bl/Fltr/

Pad

(dB) DC Corr

(dB)

* 3.73 42.84 PK1 33.4

-31.8

* 3.727 31.24 AD1 33.4

-31.8

* 4.332 41.91 PK1 33.6

-30.7

* 4.331 30.45 AD1 33.6

-30.7

* 3.679 41.66 PK1 33.3

-31.2

* 3.686 30.71 AD1 33.3

-31.3

* 4.328 41.71 PK1 33.6

-30.5

* 4.33 30.49 AD1 33.6

-30.6

* 7.722 38.66 PK1 35.9

-27.8

* 7.717 27.19 AD1 35.9

-27.7 7.24 27.95 AD1 35.7

-28.4 7.241 39.41 PK1 35.7

-28.4 0

.2 0

.2 0

.2 0

.2 0

.2

.2 0 1 2 3 4 6 5 Correct ed Readin g

(dBuV/

m) 44.44 33.04 44.81 33.55 43.76 32.91 44.81 33.69 46.76 35.59 35.45 46.71 Avg Limit

(dBuV/

Margi n

(dB) Peak Limit

(dBuV/

PK Margin

(dB) m) m)

-

54

-

54

-

54

-

54

-

54

-

-

-

-20.96

-

-20.45

-

-21.09

-

-20.31

-

-18.41

-

-

74

-

74

-

74

-

74

-

74

-

-

-

-29.56

-

-29.19

-

-30.24

-

-29.19

-

-27.24

-

-

-

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 43 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.5. TX ABOVE 1 GHz 802.11a MODE IN THE 5.3 GHz BAND RESTRICTED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVERAGE, HORIZ Page 44 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 HIGH CHANNEL RESTRICTED, AVERAGE, VERT Page 45 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 52 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 52 Page 46 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency Meter Det AF T346 Amp/Cbl/F Corrected Avg Limit Margin Peak Limit PK Margin UNII Non-

PK Margin Azimuth Height Polarity

(GHz) Reading

(dBuV)

* 3.886 41.36 PK1

* 3.884 30.39 AD1

* 4.658 41.31 PK1

* 4.66 30.19 AD1

* 5.072 41.92 PK1

* 5.073 31.02 AD1

* 5.088 44.63 PK1

* 5.101 32.85 AD1 5.633 42.93 PK1 5.636 31.89 AD1 5.642 43.33 PK1 5.652 31.81 AD1

(dB/m) ltr/Pad Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) Restricted

(dB)

(Degs)

(cm)

(dB)

(dBuV/m)

(dBuV/m) 33.5 33.5 34.1 34.1 34.1 34.1 34.1 34.2 34.6 34.6 34.6 34.7

-30.4

-30.4

-29.7

-29.7

-27.8

-27.7

-21.6

-21.6

-21

-21 44.46 33.49 45.71 34.59 48.22 37.42 57.13 45.45 56.53 45.49

-20.9 57.03

-21 45.51

-

54

-

54

-

54

-

54

-

-

-

-

-

-20.51

-

-19.41

-

-16.58

-

-8.55

-

-

-

-

74

-

74

-

74

-

74

-

-

-

-

-

-29.54

-

-28.29

-

-25.78

-

-16.87

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-11.67

-

-

68.2

-11.17

-

-

283 283 177 177 349 349 82 82 79 79 200 200 123 123 298 298 335 335 209 209 171 171 167 167 H H V V V V H H V V H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 47 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 60 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 60 Page 48 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T862 Amp/Cbl/Fl Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) tr/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

* 5.073 41.95 PK1 34.2

-30.4

(dBuV/m) 45.75

* 5.073 30.38 AD1 34.2

-30.5 34.08 2.535 43.54 PK1 32

-34.4 41.14 5.195 44.7 PK1 34.4

-23.6 55.5 5.941 44.1 PK1 35.1

-23.6 55.6 7.163 41.36 PK1 35.6

-31.7 45.26 12.742 36.56 PK1 39.1

-25.4 50.26

-

54

-

-

-

-

-

-

74

-28.25

-19.92

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

DATE: AUGUST 02, 2014 PK Margin Azimuth

(dB)

(Degs) Height

(cm) Polarity UNII Non-

Restricted

(dBuV/m)

-

-

-

-

56 56 120 120 68.2

-27.06 114 302 68.2

-12.7 229 300 68.2

-12.6 199 125 68.2

-22.94 327 115 68.2

-17.94 56 179 H H V V H H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 49 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 64 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 64 Page 50 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency Meter Det AF T346 Amp/Cbl/F Corrected Avg Limit Margin Peak Limit PK Margin UNII Non-

PK Margin Azimuth Height Polarity

(GHz) Reading

(dBuV)

* 4.757 43.8 PK1

* 4.753 31.45 AD1

* 4.751 42.93 PK1

* 4.752 31.48 AD1 2.433 30.73 AD1 2.435 42.52 PK1 2.435 30.74 AD1 2.437 43.14 PK1 5.463 29.58 AD1 5.463 29.18 AD1 5.464 40.37 PK1 5.464 40.58 PK1

(dB/m) ltr/Pad Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(dB)

(dBuV/m)

-30.6 47.3

-30.6 34.95

-30.6 46.43

-30.6 34.98

-33.1 29.73

-33.1 41.52

-33.1 29.74

-33.1 42.24

-20.8 43.38

-20.8 42.98

-20.8 54.17

-20.8 54.38 34.1 34.1 34.1 34.1 32.1 32.1 32.1 32.2 34.6 34.6 34.6 34.6

-

54

-

54

-

-

-

-

-

-

-

-

-

-19.05

-

-19.02

-

-

-

-

-

-

-

-

74

-

74

-

-

-

-

-

-

-

-

-

-26.7

-

-27.57

-

-

-

-

-

-

-

-

-

Restricted

(dBuV/m)

(dB)

(Degs)

(cm)

-

-

-

-

-

-

-

-

-

-

68.2

-26.68

-

-

68.2

-25.96

-

-

68.2 68.2

-

-

-14.03

-13.82 112 112 331 331 152 179 179 152 64 59 64 59 251 251 316 316 395 371 371 395 141 157 141 157 H H V V H V V H H V H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 51 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.6. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.3 GHz BAND RESTRICTED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVERAGE, HORIZ Page 52 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 HIGH CHANNEL RESTRICTED, AVERAGE, VERT Page 53 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 52 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 52 Page 54 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.881 41.74 PK1 33.5

-30.5 44.74

* 3.882 30.41 AD1 33.5

-30.5 33.41

* 4.709 41.24 PK1 34.2

-30.2 45.24

* 4.71 30.05 AD1 34.2

-30.2 34.05

* 4.867 41.38 PK1 34.1

-30.1 45.38

* 4.867 29.69 AD1 34.1

-30.1 33.69 1.878 43.41 PK1 30.9

-33.5 40.81 1.879 43.07 PK1 30.9

-33.5 40.47 9.664 37.38 PK1 37.1

-25.2 49.28

-

54

-

54

-

54

-

-

-

-

-20.59

-

-19.95

-

-20.31

-

-

-

74

-

74

-

74

-

-

-

-

-29.26

-

-28.76

-

-28.62

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8 8 199 199 108 199 108 199 108 199 108 199 68.2

-27.39 108 199 68.2

-27.73 360 101 68.2

-18.92 108 199 H H H H V V V H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 55 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 60 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 60 Page 56 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.327 41.8 PK1 33.6

-30.5 44.9

-

-

74

-29.1

* 4.327 30.26 AD1 33.6

-30.5 33.36 54

-20.64

-

-

* 10.698 36.38 PK1 37.9

-23.7 50.58

-

-

74

-23.42

* 10.698 24.95 AD1 37.9

-23.7 39.15 54

-14.85 1.99 43.13 PK1 31.3

-32.7 41.73 4.467 41.8 PK1 33.9

-30.3 45.4 6.543 39.99 PK1 35.7

-27.6 48.09 10.046 36.65 PK1 37.1

-24.2 49.55

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

360 101 360 101 360 101 360 101 68.2

-26.47 360 101 68.2

-22.8 360 101 68.2

-20.11 360 101 68.2

-18.65 360 101 H H H H H V V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 57 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 64 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 64 Page 58 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.664 41.61 PK1 34.1

-29.7 46.01

-

-

* 4.664 30.36 AD1 34.1

-29.7 34.76 54

-19.24

* 4.318 41.68 PK1 33.6

-30.5 44.78

-

-

* 4.318 30.07 AD1 33.6

-30.5 33.17 54

-20.83 2.049 42.86 PK1 31.5

-33.4 40.96 2.472 42.54 PK1 32.3

-32.6 42.24 8.729 38.52 PK1 36

-26.5 48.02 9.722 36.79 PK1 37.1

-24.9 48.99

-

-

-

-

-

-

-

-

74

-

74

-

-

-

-

-

-27.99

-

-29.22

-

-

-

-

-

-

-

-

-

-

-

-

-

360 200 360 200 360 200 360 200 68.2

-27.24 360 200 68.2

-25.96 360 200 68.2

-20.18 360 200 68.2

-19.21 360 200 H H V V V H V H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 59 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.7. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.3 GHz BAND RESTRICTED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVERAGE, HORIZ Page 60 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 HIGH CHANNEL RESTRICTED, PEAK, VERT HIGH CHANNEL RESTRICTED, AVERAGE, VERT Page 61 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 54 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 54 Page 62 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.744 42.74 PK1 34.1

-30.6 46.24

* 4.744 30.62 AD1 34.1

-30.6 34.12

* 8.399 38.92 PK1 35.9

-26.9 47.92

* 8.399 27.1 AD1 35.9

-26.9 36.1

* 11.827 36.33 PK1 38.5

-23.2 51.63

* 11.827 24.6 AD1 38.5

-23.2 39.9 2.435 42.98 PK1 32.1

-33.1 41.98 2.438 42.46 PK1 32.2

-33.1 41.56 3.208 41.89 PK1 32.8

-31.9 42.79

-

54

-

54

-

54

-

-

-

-

-19.88

-

-17.9

-

-14.1

-

-

-

74

-

74

-

74

-

-

-

-

-27.76

-

-26.08

-

-22.37

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2 68.2

-26.22

-26.64 68.2

-25.41 68 68 68 68 68 68 68 68 68 200 200 200 200 200 200 200 200 200 H H V V V V V H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 63 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 62 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 62 Page 64 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T346

(dB/m) Amp/Cbl/Fltr

/Pad (dB)

* 3.862 41.73 PK1

* 3.862 30.62 AD1

* 3.887 42.02 PK1

* 3.887 30.62 AD1

* 8.353 38.89 PK1

* 8.353 27.43 AD1

* 12.584 36.78 PK1

* 12.584 25.87 AD1 6.512 40.18 PK1 13.616 38.13 PK1 33.5 33.5 33.5 33.5 35.9 35.9 39 39 35.6 38.9

-30.8

-30.8

-30.4

-30.4

-27.3

-27.3

-24.9

-24.9

-27.7

-24.6 Corrected Reading

(dBuV/m) 44.43 33.32 45.12 33.72 47.49 36.03 50.88 39.97 48.08 52.43 DATE: AUGUST 02, 2014 Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

-

54

-

54

-

54

-

54

-

-

-

-20.68

-

-20.28

-

-17.97

-

-14.03

-

-

74

-

74

-

74

-

74

-

-

-

-29.57

-

-28.88

-

-26.51

-

-23.12

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2 68.2

-20.12

-15.77 0 0 0 0 0 0 0 0 0 0 101 101 101 101 101 101 101 101 101 101 H H V V V V V V H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 65 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.8. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.3 GHz BAND RESTRICTED BANDEDGE (HIGH CHANNEL, CH 58) HIGH CHANNEL RESTRICTED, PEAK, HORIZ HIGH CHANNEL RESTRICTED, AVERAGE, HORIZ Page 66 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL RESTRICTED, PEAK, VERT DATE: AUGUST 02, 2014 HIGH CHANNEL RESTRICTED, AVERAGE, VERT Page 67 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT, CH 58 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 58 Page 68 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Marker Frequenc y

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/

DC Corr Corrected Avg Limit Margin Fltr/Pad

(dB) Reading

(dBuV/m)

(dB)

(dB/m)

(dB)

(dBuV/m)

* 4.115 41.63 PK1 33.5

* 4.127 30.63 AD1 33.5

-31

-31

* 4.749 43.51 PK1 34.1

-30.6

* 4.753 31.44 AD1 34.1

-30.6

* 4.116 42.57 PK1 33.5

* 4.129 30.6 AD1 33.5

-31

-31

* 4.752 42.67 PK1 34.1

-30.6

* 4.753 31.49 AD1 34.1

-30.6

* 8.243 38.45 PK1 35.9

-27.4

* 8.239 27.02 AD1 35.9

-27.5

* 8.404 38.25 PK1 35.9

-26.9

* 8.404 26.69 AD1 35.9

-26.9 0

.2 0

.2 0

.2 0

.2 0

.2 0

.2 44.13 33.33 47.01 35.14 45.07 33.3 46.17 35.19 46.95 35.62 47.25 35.89

-

54

-

54

-

54

-

54

-

54

-

54

-

-20.67

-

-18.86

-

-20.7

-

-18.81

-

-18.38

-

-18.11 1 2 3 4 5 6

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average DATE: AUGUST 02, 2014 Peak Limit

(dBuV/

PK Margin

(dB) m) 74

-29.87

-

74

-

74

-

74

-

74

-

74

-

-

-26.99

-

-28.93

-

-27.83

-

-27.05

-

-26.75

-

UNII Non-

Restricte d

(dBuV/m) PK Azimuth Height Polarity Margin

(dB)

(Degs)

(cm)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

335 335 139 139 223 223 242 242 242 242 260 260 115 115 272 272 174 174 319 319 188 188 175 175 H H H H V V V V H H V V Page 69 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.9. TX ABOVE 1 GHz 802.11a MODE IN THE 5.6 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 70 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 71 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A AUTHORIZED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL BANDEDGE, PEAK, HORIZ DATE: AUGUST 02, 2014 HIGH CHANNEL BANDEDGE, PEAK, VERT Page 72 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 100 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 100 Page 73 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 3.867 42.58 PK1

* 3.867 30.78 AD1

* 4.696 41.95 PK1

* 4.699 30.81 AD1

* 4.699 42.06 PK1

* 4.7 30.52 AD1

* 3.878 41.98 PK1

* 3.87 30.72 AD1 6.495 27.95 AD1 6.511 39.08 PK1 6.544 27.42 AD1 6.548 38.7 PK1 33.5 33.5 34.2 34.2 34.2 34.2 33.5 33.5 35.6 35.6 35.7 35.7

(dBuV/m) 45.38 33.58 46.35 35.11 46.36 34.82 44.98 33.62 35.05 46.88 35.42 46.7

-30.7

-30.7

-29.8

-29.9

-29.9

-29.9

-30.5

-30.6

-28.5

-27.8

-27.7

-27.7

-

54

-

54

-

54

-

54

-

-

-

-

-

-20.42

-

-18.89

-

-19.18

-

-20.38

-

-

-

-

74

-

74

-

74

-

74

-

-

-

-

-

-28.62

-

-27.65

-

-27.64

-

-29.02

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-21.32

-

-

68.2

-21.5 277 277 247 247 31 31 18 18 330 330 190 190 337 337 337 337 207 207 256 256 256 256 170 170 H H H H V V V V V V H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 74 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 116 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 116 Page 75 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 3.742 43.07 PK1

* 3.727 31.59 AD1

* 4.698 42.5 PK1

* 4.699 30.96 AD1

* 4.708 42.25 PK1

* 4.711 30.78 AD1

* 3.78 42.87 PK1

* 3.769 32 AD1 6.502 39.39 PK1 6.502 28.19 AD1 6.818 39.69 PK1 6.821 28.08 AD1 33.4 33.4 34.2 34.2 34.2 34.2 33.4 33.4 35.6 35.6 35.9 35.9

(dBuV/m) 44.57 33.19 46.8 35.26 46.25 34.68 44.37 33.5 46.89 35.69 47.09 35.38

-31.9

-31.8

-29.9

-29.9

-30.2

-30.3

-31.9

-31.9

-28.1

-28.1

-28.5

-28.6

-

54

-

54

-

54

-

54

-

-

-

-

-

-20.81

-

-18.74

-

-19.32

-

-20.5

-

-

-

-

74

-

74

-

74

-

74

-

-

-

-

-

-29.43

-

-27.2

-

-27.75

-

-29.63

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-21.31

-

-

68.2

-21.11

-

-

291 291 269 269 33 33 45 45 122 122 81 81 179 179 183 183 134 134 134 134 242 242 359 359 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 76 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 140 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 140 Page 77 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.772 43.09 PK1 33.4

-31.9 44.59

* 3.771 32.59 AD1 33.4

-31.8 34.19

* 4.718 42.52 PK1 34.2

-29.9 46.82

* 4.720 31.96 AD1 34.2

-29.9 36.26

* 4.698 42.27 PK1 34.2

-30.2 46.27

* 4.701 30.79 AD1 34.2

-30.3 34.69

* 3.775 42.85 PK1 33.4

-31.9 44.35

* 3.772 32.2 AD1 33.4

-31.9 33.7

* 8.427 38.55 PK1 35.9

* 8.429 26.89 AD1 35.9

-27

-27 47.45 35.79

* 8.402 38.41 PK1 35.9

-26.9 47.41

* 8.404 27.11 AD1 35.9

-26.9 36.11

-

54

-

54

-

54

-

54

-

54

-

54

-

-19.81

-

-17.74

-

-19.33

-

-20.7

-

-18.21

-

-17.89 74

-

74

-

74

-

74

-

74

-

74

-

-29.41

-

-27.0

-

-27.73

-

-29.65

-

-26.55

-

-26.59

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

291 291 269 269 33 33 45 45 171 171 256 256 179 179 183 183 134 134 134 134 342 342 140 140 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 78 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.10. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.6 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 79 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 80 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A AUTHORIZED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL BANDEDGE, PEAK, HORIZ DATE: AUGUST 02, 2014 HIGH CHANNEL BANDEDGE, PEAK, VERT Page 81 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 100 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 100 Page 82 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.718 41.3 PK1 34.2

-30.5 45

* 4.718 30.06 AD1 34.2

-30.5 33.76

* 12.457 36.78 PK1 38.9

-23.6 52.08

* 12.457 25.26 AD1 38.9

-23.6 40.56

* 7.653 38.77 PK1 35.8

-27.3 47.27

* 7.653 27.75 AD1 35.8

-27.3 36.25 1.989 44.38 PK1 31.3

-32.6 43.08 2.44 42.47 PK1 32.2

-33.1 41.57 10.253 37.05 PK1 37.2

-25.2 49.05

-

54

-

54

-

54

-

-

-

-

-20.24

-

-13.44

-

-17.75

-

-

-

74

-

74

-

74

-

-

-

-

-29

-

-21.92

-

-26.73

-

-

-

-

-

-

-

-

-

-

68.2 68.2 68.2

-

-

-

-

-

-

-25.12

-26.63

-19.15 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 H H H H V V H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 83 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 116 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 116 Page 84 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Marker Frequency

(GHz) Meter Reading

(dBuV) Det AF T712

(dB/m) Amp/Cbl/Fltr/

Pad (dB) Corrected Reading

(dBuV/m) Avg Limit

(dBuV/m) Margin

(dB) Peak Limit

(dBuV/m) PK Margin

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity 4 2 6 1 5 3

* 4.368 37.73 PK1

* 4.378 26.74 AD1

* 7.749 36.55 PK1

* 7.745 24.45 AD1

* 9.362 34.88 PK1

* 9.361 23.39 AD1 4.488 38.11 PK1 4.483 26.66 AD1 7.186 35.74 PK1 7.194 24.72 AD1 9.661 34.9 PK1 9.668 22.7 AD1 33.2 33.2 35.1 35.1 36 36 33.5 33.5 35.1 35.1 36.3 36.3

-28.1

-27.9

-24

-24.1

-23.1

-23

-27.1

-27.2

-24

-23.8

-22.2

-22 42.83 32.04 47.65 35.45 47.78 36.39 44.51 32.96 46.84 36.02 49 37

-

54

-

54

-

54

-

-

-

-

-

-

-

-21.96

-

-18.55

-

-17.61

-

-

-

-

-

-

74

-

74

-

74

-

-

-

-

-

-

-

-31.17

-

-26.35

-

-26.22

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-23.69

-

-

68.2

-21.36

-

-

68.2

-19.2

-

-

202 202 360 360 148 148 266 266 210 210 71 71 100 100 202 202 100 100 202 202 202 202 202 202 V V H H V V H H V V H H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 85 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 140 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 140 Page 86 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T712 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(dBuV/m) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.304 39.02 PK1

* 4.304 26.65 AD1

* 3.739 38.85 PK1

* 3.74 27.2 AD1 33 33 32.7 32.7

-27.8 44.22

-27.8 31.85

-28.8 42.75

-28.8 31.1 2.462 39.54 PK1 32

-29.8 41.74 2.461 27.27 AD1 7.191 24.87 AD1 7.192 36.45 PK1 9.737 23.05 AD1 9.741 35.17 PK1 9.944 34.18 PK1 9.945 22.84 AD1 31.9 35.1 35.1 36.4 36.4 36.7 36.7

-29.8 29.37

-23.8 36.17

-23.8 47.75

-21.4 38.05

-21.5 50.07

-21.8 49.08

-21.8 37.74

-

54

-

54

-

-

-

-

-

-

-

-

-

-22.15

-

-22.9

-

-

-

-

-

-

-

-

74

-

74

-

-

-

-

-

-

-

-

-

-29.78

-

-31.25

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-26.46

-

-

-

-

68.2

-20.45

-

68.2 68.2

-

-

-18.13

-19.12

-

287 287 239 239 183 183 58 58 355 355 92 92 202 202 202 202 211 211 201 201 201 201 100 100 H H V V V V H H H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 87 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10.2.11. TX ABOVE 1 GHz 802.11n HT20 MODE, CHANNEL 144, 5.6 GHz BAND HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT, CH 144 Page 88 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL VERTICAL PLOT, CH 144 DATE: AUGUST 02, 2014 Page 89 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T120 Amp/Cbl/Fl Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) tr/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(dBuV/m) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.77 38.62 PK1 34.1

-27.3 45.42

* 4.767 27.55 AD1 34.1

-27.3 34.35 2.435 44.68 PK1 32.4

-30.9 46.18

* 3.706 38.78 PK1 34.8

-29.1 44.48

-

54

-

-

-

-19.65

-

-

* 3.714 27.66 AD1 34.8

-29.1 33.36 54

-20.64

* 5.126 42.23 PK1 34.4

-19.3 57.33

* 5.128 30.71 AD1 34.4

-19.3 45.81 17.057 35.72 PK1 41.2

-16.5 60.42 7.21 37.7 PK1 35.5

-25.2 48

-

54

-

-

-

-8.19

-

-

74

-

-

74

-

74

-

-

-

-28.58

-

-

-29.52

-

-16.67

-

-

-

-

-

-

-

34 34 337 337 68.2

-22.02 104 368

-

-

-

-

-

-

-

-

220 381 220 381 15 15 366 366 68.2

-7.78 291 145 68.2

-20.2 268 242 H H V V V H H H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 90 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.12. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.6 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 91 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 92 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A AUTHORIZED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL BANDEDGE, PEAK, HORIZ DATE: AUGUST 02, 2014 HIGH CHANNEL BANDEDGE, PEAK, VERT Page 93 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 102 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 102 Page 94 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr/

(dB/m) Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 4.732 42.03 PK1 34.1

-30.6 45.53

* 4.732 30.35 AD1 34.1

-30.6 33.85

* 3.877 42.56 PK1 33.5

-30.5 45.56

* 3.877 30.55 AD1 33.5

-30.5 33.55

* 13.353 37.54 PK1 39.2

-24.5 52.24

* 13.353 25.72 AD1 39.2

-24.5 40.42 2.44 43 PK1 32.2

-33.1 42.1 9.236 36.92 PK1 36.6

-25.5 48.02 9.716 37.49 PK1 37.1

-24.7 49.89

-

54

-

54

-

54

-

-

-

-

-20.15

-

-20.45

-

-13.58

-

-

-

74

-

74

-

74

-

-

-

-

-28.47

-

-28.44

-

-21.76

-

-

-

-

-

-

-

-

-

-

68.2 68.2 68.2

-

-

-

-

-

-

-26.1

-20.18

-18.31 1 1 1 1 1 1 1 1 1 101 101 101 101 101 101 101 101 101 H H V V H H V V H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 95 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 110 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 110 Page 96 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 4.934 42.75 PK1

* 4.933 33.83 AD1

* 3.859 42.09 PK1

* 3.86 30.24 AD1

* 8.14 38.86 PK1

* 8.14 27.36 AD1

* 9.33 37.41 PK1

* 9.33 25.33 AD1

* 12.672 36.93 PK1

* 12.67 24.97 AD1 34.1 34.1 33.5 33.5 35.9 35.9 36.7 36.7 39.1 39.1

(dBuV/m)

-29.7 47.15

-29.7 38.23

-30.9 44.69

-30.9 32.84

-27.5 47.26

-27.5 35.76

-25.3 48.81

-25.3 36.73

-24.4 51.63

-24.5 39.57 6.166 41.75 PK1 35.4

-29.4 47.75

-

54

-

54

-

54

-

54

-

54

-

-

-15.77

-

-21.16

-

-18.24

-

-17.27

-

-14.43

-

74

-

74

-

74

-

74

-

74

-

-

-26.85

-

-29.31

-

-26.74

-

-25.19

-

-22.37

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

75 75 75 75 3 3 3 3 126 126 68.2

-20.45 3 177 177 177 177 117 117 117 117 200 200 117 H H V V H H V V V V H

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 97 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 134 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 134 Page 98 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA

* 3.888 42.07 PK1

* 3.888 30.1 AD1

* 5.04 43.43 PK1

* 5.04 34.64 AD1

* 4.706 42.19 PK1

* 4.706 29.88 AD1 6.298 40.52 PK1 6.548 39.48 PK1 14.792 38.58 PK1 33.5 33.5 34.1 34.1 34.2 34.2 35.5 35.7 39.5

-30.4

-30.4

-28.9

-28.9

-30.1

-30.1

-29

-27.7

-24.5

(dBuV/m) 45.17 33.2 48.63 39.84 46.29 33.98 47.02 47.48 53.58 DATE: AUGUST 02, 2014 UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

-

54

-

54

-

54

-

-

-

-

-20.8

-

-14.16

-

-20.02

-

-

-

74

-

74

-

74

-

-

-

-

-28.83

-

-25.37

-

-27.71

-

-

-

-

-

-

-

-

-

-

68.2 68.2 68.2

-

-

-

-

-

-

-21.18

-20.72

-14.62 31 31 208 208 208 208 205 205 205 199 199 168 168 168 168 111 111 111 H H H H V V H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 99 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10.2.13. TX ABOVE 1 GHz 802.11n HT40 MODE, CHANNEL 142, 5.6 GHz BAND HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT, CH 142 Page 100 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL VERTICAL PLOT, CH 142 DATE: AUGUST 02, 2014 Page 101 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T120 Amp/Cbl/Flt Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) r/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(dBuV/m) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity 1.869 40.86 PK1 31.1

-31.6 40.36 4.431 39.12 PK1 33.9

-27.2 45.82 2.439 44.7 PK1 32.4

-30.9 46.2

* 4.782 39.34 PK1 34.1

-27.4 46.04

-

-

-

-

-

-

-

-

-

-

-

-

-

-

74

-27.96

* 4.778 27.74 AD1 34.1

-27.4 34.44 54

-19.56

-

-

* 8.43 35.81 PK1 35.8

-25 46.61

-

-

74

-27.39

* 8.432 24.55 AD1 35.8

-25 35.35 54

-18.65 16.374 36.21 PK1 40.8

-18.4 58.61

-

-

-

-

-

-

68.2

-27.84 322 314 68.2

-22.38 217 204 68.2

-22 137 206

-

-

-

-

-

-

-

-

140 368 140 368 201 167 201 167 68.2

-9.59 90 397 H H V V V H H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 102 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.14. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.6 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL, 106) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED, AVERAGE, HORIZ Page 103 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT LOW CHANNEL RESTRICTED, AVERAGE, VERT Page 104 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 106 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 106 Page 105 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Marke r 1 2 3 4 5 6 Frequenc y

(GHz) Meter Reading

(dBuV) Det AF T346

(dB/m) Amp/Cbl/

Fltr/Pad

(dB) DC Corr

(dB)

* 3.77 42.7 PK1 33.4

-31.8

* 3.76 31.57 AD1 33.4

-32.1

* 4.698 42.29 PK1 34.2

-29.9

* 4.71 30.71 AD1 34.2

-30.2

* 3.878 42.32 PK1 33.5

-30.5

* 3.861 30.72 AD1 33.5

-30.9

* 4.703 42.48 PK1 34.2

-30

* 4.709 30.72 AD1 34.2

-30.2

* 7.338 38.32 PK1 35.7

-27.6

* 7.33 27.02 AD1 35.7

-27.6

* 7.343 38.8 PK1 35.7

-27.5

* 7.341 27.1 AD1 35.7

-27.6 0

.2 0

.2 0

.2 0

.2 0

.2 0

.2 Correcte d Reading

(dBuV/m) 44.3 33.07 46.59 34.91 45.32 33.52 46.68 34.92 46.42 35.32 47 35.4 Avg Limit Margin

(dB) Peak Limit PK Margin UNII Non-

(dBuV/m)

(dBuV/m)

(dB) Restricte PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity d

(dBuV/m)

-

54

-

54

-

54

-

54

-

54

-

54

-

-

20.93

-

-

19.09

-

-

20.48

-

-

19.08

-

-

18.68

-

-18.6 74

-

74

-

74

-

74

-

74

-

74

-

-29.7

-

-27.41

-

-28.68

-

-27.32

-

-27.58

-

-27

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

303 334 303 334 40 40 253 253 274 158 274 158 263 271 263 271 324 258 324 258 169 169 139 139 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 106 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. DATE: AUGUST 02, 2014 REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10.2.15. TX ABOVE 1 GHz 802.11n ac80 MODE, CHANNEL 138, 5.6 GHz BAND HARMONICS AND SPURIOUS EMISSIONS HIGH CHANNEL HORIZONTAL PLOT, CH 138 Page 107 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL VERTICAL PLOT, CH 138 DATE: AUGUST 02, 2014 Page 108 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T120 Amp/Cbl/Fl Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m) tr/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(dBuV/m) UNII Non-

Restricted

(dBuV/m) PK Margin Azimuth

(dB)

(Degs) Height

(cm) Polarity

* 3.674 40.19 PK1 34.9

-29.4 45.69

-

-

74

-28.31

* 3.671 28.95 AD1 34.9

-29.5 34.35 54

-19.65 1.766 41.25 PK1 29.9

-31.5 39.65 1.99 40.69 PK1 31.7

-31.3 41.09 2.409 40.8 PK1 32.2

-30.8 42.2 2.438 44.89 PK1 32.4

-30.9 46.39 16.256 35.65 PK1 40.5

-18 58.15 9.77 35.19 PK1 37.1

-22.9 49.39

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

325 305 325 305 68.2

-28.55 251 299 68.2

-27.11 9 389 68.2

-26 36 201 68.2

-21.81 149 106 68.2

-10.05 234 320 68.2

-18.81 328 310 H H V V V V H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 109 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.16. TX ABOVE 1 GHz 802.11a MODE IN THE 5.8 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT Page 110 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A AUTHORIZED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL BANDEDGE, PEAK, HORIZ DATE: AUGUST 02, 2014 HIGH CHANNEL BANDEDGE, PEAK, VERT Page 111 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 149 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 149 Page 112 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 2.672 42.8 PK1

* 2.683 30.82 AD1

* 4.738 42.56 PK1

* 4.753 31.44 AD1

* 2.784 42.14 PK1

* 2.795 30.47 AD1

* 4.64 41.73 PK1

* 4.645 29.79 AD1

* 7.654 39.4 PK1

* 7.655 27.07 AD1 32.5 32.5 34.1 34.1 32.4 32.4 34.1 34.1 35.8 35.8

(dBuV/m)

-32.4 42.9

-32.4 30.92

-30.6 46.06

-30.6 34.94

-32

-32 42.54 30.87

-29.9 45.93

-29.8 34.09

-27.3 47.9

-27.3 35.57

* 7.393 39.78 PK1 35.7

-27.2 48.28

* 7.391 27.07 AD1 35.7

-27.2 35.57

-

54

-

54

-

54

-

54

-

54

-

54

-

-23.08

-

-19.06

-

-23.13

-

-19.91

-

-18.43

-

-18.43 74

-

74

-

74

-

74

-

74

-

74

-

-31.1

-

-27.94

-

-31.46

-

-28.07

-

-26.1

-

-25.72

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

229 229 135 135 96 96 330 330 251 251 8 8 378 378 286 286 209 209 115 115 397 397 364 364 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 113 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 157 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 157 Page 114 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.748 42.8 PK1

* 3.744 30.82 AD1

* 4.703 42.56 PK1

* 4.701 31.44 AD1

* 3.701 42.14 PK1

* 3.698 30.47 AD1

* 4.64 41.73 PK1

* 4.645 29.79 AD1

* 7.402 39.4 PK1

* 7.399 27.07 AD1 7.209 39.78 PK1 7.213 27.07 AD1 32.5 32.5 34.1 34.1 32.4 32.4 34.1 34.1 35.8 35.8 35.7 35.7

-32.4

-32.4

-30.6

-30.6

-32

-32

-29.9

-29.8

-27.3

-27.3

-27.2

-27.2 42.9 30.92 46.06 34.94 42.54 30.87 45.93 34.09 47.9 35.57 48.28 35.57

-

54

-

54

-

54

-

54

-

54

-

-

-

-23.08

-

-19.06

-

-23.13

-

-19.91

-

-18.43

-

-

74

-

74

-

74

-

74

-

74

-

-

-

-31.1

-

-27.94

-

-31.46

-

-28.07

-

-26.1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

- 19.92

-

-

227 227 130 130 102 102 334 334 241 241 48 48 378 378 289 289 201 201 125 125 377 377 344 344 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 115 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 165 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 165 Page 116 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 2.850 40.07 PK1

* 2.848 30.59 AD1

* 4.703 40.5 PK1

* 4.705 28.96 AD1

* 4.712 40.25 PK1

* 4.711 28.78 AD1 2.929 42.87 PK1 2.930 32 AD1 7.022 39.39 PK1 7.025 28.19 AD1 6.881 39.69 PK1 6.884 28.08 AD1 33.4 33.4 34.2 34.2 34.2 34.2 33.4 33.4 35.6 35.6 35.9 35.9

(dBuV/m) 41.57 32.19 44.8 33.26 44.25 32.68

-31.9

-31.8

-29.9

-29.9

-30.2

-30.3

-31.9 44.37

-31.9

-28.1

-28.1

-28.5

-28.6 33.5 46.89 35.69 47.09 35.38

-

54

-

54

-

54

-

-

-

-

-

-

-

-21.81

-

-20.74

-

-21.32

-

-

-

-

-

-

74

-

74

-

74

-

-

-

-

-

-

-

-32.43

-

-29.2

-

-29.75

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-23.83

-

-

68.2

-21.31

-

-

68.2

-21.11

-

-

283 283 233 233 46 46 87 87 122 122 81 81 181 181 202 202 154 154 134 134 242 242 359 359 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 117 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.17. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 5.8 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT Page 118 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A AUTHORIZED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL BANDEDGE, PEAK, HORIZ DATE: AUGUST 02, 2014 HIGH CHANNEL BANDEDGE, PEAK, VERT Page 119 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 149 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 149 Page 120 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 DATA Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr

(dB/m)

/Pad (dB) Corrected Reading

(dBuV/m) Avg Limit Margin Peak Limit PK Margin

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 2.819 42.34 PK1

* 2.837 30.7 AD1

* 4.326 41.56 PK1

* 4.333 30.52 AD1

* 3.63 41.85 PK1

* 3.621 30.74 AD1

* 4.716 42.22 PK1

* 4.732 30.76 AD1

* 8.132 38.29 PK1

* 8.144 26.98 AD1

* 8.2

* 8.2 38.79 PK1 27.2 AD1 32.4 32.4 33.6 33.6 33.2 33.2 34.2 34.1 35.9 35.9 35.9 35.9

-32.2

-32.5

-30.5

-30.8

-30.9

-31

-30.4

-30.6

-27.4

-27.5

-28

-28 42.54 30.6 44.66 33.32 44.15 32.94 46.02 34.26 46.79 35.38 46.69 35.1

-

54

-

54

-

54

-

54

-

54

-

54

-

-23.4

-

-20.68

-

-21.06

-

-19.74

-

-18.62

-

-18.9 74

-

74

-

74

-

74

-

74

-

74

-

-31.46

-

-29.34

-

-29.85

-

-27.98

-

-27.21

-

-27.31

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

231 231 291 291 264 264 191 191 329 329 288 288 243 243 218 218 280 280 110 110 145 145 167 167 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 121 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A MID CHANNEL HORIZONTAL PLOT, CH 157 DATE: AUGUST 02, 2014 MID CHANNEL VERTICAL PLOT, CH 157 Page 122 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity DATA Frequency

(GHz) Meter Reading

(dBuV)

* 3.843 42.25 PK1

* 3.857 31.1 AD1

* 4.741 43.1 PK1

* 4.744 31.38 AD1

* 3.684 42.94 PK1

* 3.687 30.92 AD1

* 4.13 41.44 PK1

* 4.127 30.53 AD1

* 9.075 37.44 PK1

* 9.067 25.83 AD1 9.25 9.27 25.2 AD1 37.11 PK1 33.5 33.5 34.1 34.1 33.3 33.3 33.4 33.5 36.4 36.4 36.6 36.6

(dBuV/m)

-31.3 44.45

-31

-30.6

-30.6

-31.3

-31.3

-31

-31

-26.3

-26.2

-25.5

-25.2 33.6 46.6 34.88 44.94 32.92 43.84 33.03 47.54 36.03 36.3 48.51

-

54

-

54

-

54

-

54

-

54

-

-

-

-20.4

-

-19.12

-

-21.08

-

-20.97

-

-17.97

-

-

74

-

74

-

74

-

74

-

74

-

-

-

-29.55

-

-27.4

-

-29.06

-

-30.16

-

-26.46

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2

-19.69 152 152 82 82 179 179 5 5 144 144 18 18 103 103 152 152 122 122 285 285 245 245 191 191 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 123 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 165 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 165 Page 124 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Frequency

(GHz) Meter Reading

(dBuV)

* 3.915 41.86 PK1

* 3.931 30.49 AD1

* 4.694 42.5 PK1

* 4.699 30.66 AD1

* 3.863 42.3 PK1

* 3.879 30.76 AD1

* 4.744 43.37 PK1

* 4.752 31.41 AD1

* 9.325 36.4 PK1

* 9.313 25.38 AD1

* 9.335 36.71 PK1

* 9.336 25.39 AD1 33.5 33.5 34.2 34.2 33.5 33.5 34.1 34.1 36.7 36.7 36.8 36.8

(dBuV/m) 44.86 33.19 46.9 34.96 45 33.76 46.87 34.91 47.8 36.48 48.21 36.79

-30.5

-30.8

-29.8

-29.9

-30.8

-30.5

-30.6

-30.6

-25.3

-25.6

-25.3

-25.4 DATE: AUGUST 02, 2014 UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

-

54

-

54

-

54

-

54

-

54

-

54

-

-20.81

-

-19.04

-

-20.24

-

-19.09

-

-17.52

-

-17.21 74

-

74

-

74

-

74

-

74

-

74

-

-29.14

-

-27.1

-

-29

-

-27.13

-

-26.2

-

-25.79

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

41 41 38 38 276 276 282 282 37 37 303 303 174 174 304 304 269 269 267 267 103 103 278 278 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 125 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.18. TX ABOVE 1 GHz 802.11n HT40 MODE IN THE 5.8 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT Page 126 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A AUTHORIZED BANDEDGE (HIGH CHANNEL) HIGH CHANNEL BANDEDGE, PEAK, HORIZ DATE: AUGUST 02, 2014 HIGH CHANNEL BANDEDGE, PEAK, VERT Page 127 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS LOW CHANNEL HORIZONTAL PLOT, CH 151 DATE: AUGUST 02, 2014 LOW CHANNEL VERTICAL PLOT, CH 151 Page 128 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB) REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Frequency

(GHz) Meter Reading

(dBuV)

* 3.914 42.45 PK1

* 3.914 30.34 AD1

* 4.325 43 PK1

* 4.325 30.36 AD1

* 8.298 38.84 PK1

* 8.298 27.28 AD1

* 11.507 37.68 PK1

* 11.507 25.65 AD1 7.947 38.37 13.615 38.48 PK1 PK1 33.5 33.5 33.6 33.6 35.8 35.8 38.2 38.2 35.9 38.9

(dBuV/m) 45.45 33.34 46.2 33.56 47.74 36.18 51.48 39.45 47.17 52.78

-30.5

-30.5

-30.4

-30.4

-26.9

-26.9

-24.4

-24.4

-27.1

-24.6 DATE: AUGUST 02, 2014 UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

-

54

-

54

-

54

-

54

-

-

-

-20.66

-

-20.44

-

-17.82

-

-14.55

-

-

74

-

74

-

74

-

74

-

-

-

-28.55

-

-27.8

-

-26.26

-

-22.52

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

68.2 68.2

-21.03

-15.42 360 360 360 360 360 360 360 360 360 360 101 101 101 101 101 101 101 101 101 101 H H V V H H H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 129 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HIGH CHANNEL HORIZONTAL PLOT, CH 159 DATE: AUGUST 02, 2014 HIGH CHANNEL VERTICAL PLOT, CH 159 Page 130 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA DATE: AUGUST 02, 2014 Frequency

(GHz) Meter Reading

(dBuV) Det AF T346 Amp/Cbl/Fltr Corrected Avg Limit Margin Peak Limit PK Margin

(dB/m)

/Pad (dB) Reading

(dBuV/m)

(dB)

(dBuV/m)

(dB)

(dBuV/m) UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

* 3.871 42.22 PK1 33.5

-30.6 45.12

* 3.871 30.74 AD1

* 4.71 42.09 PK1 33.5 34.2

-30.6

-30.2 33.64 46.09

* 4.71 30.49 AD1 34.2

-30.2 34.49 2.534 42.41 PK1 32.4

-32.1 42.71 7.071 40.09 PK1 8.556 38.34 PK1 35.8 35.9

-28.3

-26.5 47.59 47.74 14.464 38.68 PK1 39.3

-24.6 53.38

-

54

-

54

-

-

-

-

-

-20.36

-

-19.51

-

-

-

-

74

-

74

-

-

-

-

-

-28.88

-

-27.91

-

-

-

-

-

-

-

-

-

68.2 68.2 68.2

-

-

-

-

-25.49

-20.61

-20.46 68.2

-14.82 360 360 360 360 360 360 360 360 200 200 200 200 200 200 200 200 H H V V H V H V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 131 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.2.19. TX ABOVE 1G 802.11ac 80MHz MODE IN THE 5.8 GHz BAND RESTRICTED & AUTHORIZED BANDEDGE (LOW CHANNEL, 155) LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ LOW CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT Page 132 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A RESTRICTED & AUTHORIZED BANDEDGE (CHANNEL, 155) DATE: AUGUST 02, 2014 HIGH CHANNEL RESTRICTED & AUTHORIZED, PEAK, HORIZ HIGH CHANNEL RESTRICTED & AUTHORIZED, PEAK, VERT Page 133 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HARMONICS AND SPURIOUS EMISSIONS MID CHANNEL HORIZONTAL PLOT, CH 155 DATE: AUGUST 02, 2014 MID CHANNEL HORIZONTAL PLOT, CH 155 Page 134 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATA Frequency

(GHz) Meter Reading

(dBuV)

(dB/m)

/Pad (dB) Det AF T346 Amp/Cbl/Fltr DC Corr (dB) Corrected Avg Limit Margin Peak Limit PK Margin

* 3.879 42.01 PK1 33.5

* 3.867 30.74 AD1 33.5

* 4.646 41.85 PK1 34.1

* 4.655 30.12 AD1

* 3.884 42.56 PK1 34.1 33.5

* 3.882 30.72 AD1 33.5

* 4.676 41.57 PK1 34.2

* 4.667 30.08 AD1 34.1

* 8.401 37.91 PK1

* 8.388 26.74 AD1 35.9 35.9

* 8.416 37.75 PK1 35.9

* 8.412 26.76 AD1 35.9

-30.5

-30.7

-29.8

-29.7

-30.5

-30.5

-29.8

-29.7

-26.9

-27.1

-26.9

-26.9 0

.2 0

.2 0

.2 0

.2 0

.2 0

.2 Reading

(dBuV/m) 45.01 33.74 46.15 34.72 45.56 33.92 45.97 34.68 46.91 35.74 46.75 35.96

(dBuV/m)

(dB)

(dBuV/m)

(dB)

-

54

-

54

-

54

-

54

-

54

-

54

-

-20.26

-

-19.28

-

-20.08

-

-19.32

-

-18.26

-

-18.04 74

-

74

-

74

-

74

-

74

-

74

-

-28.99

-

-27.85

-

-28.44

-

-28.03

-

-27.09

-

-27.25

-

DATE: AUGUST 02, 2014 UNII Non-

Restricted

(dBuV/m) PK Margin

(dB) Azimuth

(Degs) Height

(cm) Polarity

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

94 94 14 14 209 209 257 257 170 170 243 243 215 215 117 117 340 340 264 264 113 113 131 131 H H H H V V V V H H V V

* - indicates frequency in CFR15.205/IC7.2.2 Restricted Band PK1 - KDB789033 Method: Peak AD1 - KDB789033 Method: AD Primary Power Average Page 135 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10.3. WORST-CASE BELOW 1 GHz DATE: AUGUST 02, 2014 SPURIOUS EMISSIONS 30 TO 1000 MHz (WORST-CASE CONFIGURATION, HORIZONTAL) HORIZONTAL PLOT VERTICAL PLOT Page 136 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL DATA DATE: AUGUST 02, 2014 Marker Frequency Meter Det Hybrid Amp/Cbl (dB) Corrected QPk Limit Margin Azimuth Height Polarity

(MHz) Reading

(dBuV) 30.6375 26.97 34.505 30.39 58.56 35.74 66.635 35.83 100.3375 32.69 705.7 34.03 713.1 833.4 33.1 33.73 1 2 3 4 5 6 7 8 PK PK PK PK PK PK PK PK 21 18.1 7.6 8.2 10.4 20.2 20.4 21.8 Reading

(dBuV/m) 16.27 16.59 11.74 12.43 11.39 24.83 24.1 26.63

-31.7

-31.9

-31.6

-31.6

-31.7

-29.4

-29.4

-28.9

(dBuV/m)

(dB)

(Degs)

(cm) 40 40 40 40 43.52 46.02 46.02 46.02

-23.73 0-360

-23.41 0-360

-28.26 0-360

-27.57 0-360

-32.13 0-360

-21.19 0-360

-21.92 0-360

-19.39 0-360 301 100 100 100 100 300 300 100 H V V V V H H V PK - Peak detector Page 137 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 10.4. WORST-CASE 18 to 26 GHz DATE: AUGUST 02, 2014 SPURIOUS EMISSIONS 18000 TO 26000 MHz (WORST-CASE CONFIGURATION, HORIZONTAL &

VERTICAL) HORIZONTAL & VERTICAL PLOT (5.2G) HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det AF T89 Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 25.194 44.23 PK 33.9

-22.8

-9.5 45.83 25.414 44.07 PK 34

-22.9

-9.5 45.67 54 54

-8.17

-8.33 74 74

(dB)

-28.17

-28.33 1 2 PK - Peak detector Page 138 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL PLOT (5.3G) DATE: AUGUST 02, 2014 HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det AF T89 Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 24.128 44 PK 33.7

-22.7

-9.5 45.5 25.42 43.83 PK 34

-23

-9.5 45.33 54 54

-8.5

-8.67 74 74

(dB)

-28.5

-28.67 1 2 PK - Peak detector Page 139 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL PLOT (5.6G) DATE: AUGUST 02, 2014 HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det AF T89 Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 23.955 43.43 PK 33.6

-22.7

-9.5 44.83 25.041 43.77 PK 34

-22.6

-9.5 45.67 54 54

-9.17

-8.33 74 74

(dB)

-29.17

-28.33 1 2 PK - Peak detector Page 140 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL PLOT (5.8G) DATE: AUGUST 02, 2014 HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det AF T89 Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 25.427 43.77 PK 34

-23.1

-9.5 45.17 25.087 43.83 PK 33.9

-22.9

-9.5 45.33 54 54

-8.83

-8.67 74 74

(dB)

-28.83

-28.67 1 2 PK - Peak detector Page 141 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A DATE: AUGUST 02, 2014 10.5. WORST-CASE 26 to 40 GHz SPURIOUS EMISSIONS 26TO 40 GHz (WORST-CASE CONFIGURATION) HORIZONTAL & VERTICAL PLOT (5.2G) HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det T90 AF Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 39.347 48.17 PK 38.1

-36.1

-9.5 40.67 39.208 48.23 PK 38.4

-35.8

-9.5 41.33 54 54

-13.33

-12.67 74 74

(dB)

-33.33

-32.67 1 2 PK - Peak detector Page 142 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL PLOT (5.3G) DATE: AUGUST 02, 2014 HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det T90 AF Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 39.239 49.53 PK 38.5

-36.2

-9.5 42.33 39.573 48.87 PK 37.3

-35.5

-9.5 41.17 54 54

-11.67

-12.83 74 74

(dB)

-31.67

-32.83 1 2 PK - Peak detector Page 143 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL PLOT (5.6G) DATE: AUGUST 02, 2014 HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det T90 AF Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 39.378 49.33 PK 37.9

-35.9

-9.5 41.83 39.184 48.57 PK 38.2

-36.1

-9.5 41.17 54 54

-12.17

-12.83 74 74

(dB)

-32.17

-32.83 1 2 PK - Peak detector Page 144 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A HORIZONTAL & VERTICAL PLOT (5.8G) DATE: AUGUST 02, 2014 HORIZONTAL & VERTICAL DATA Marker Frequency Meter Det T90 AF Amp/Cbl Dist Corr Corrected Avg Limit Margin

(dB/m)

(dB)

(dB)

(dBuV/m) Peak Limit PK Margin

(GHz) Reading Reading

(dB)

(dBuV/m)

(dBuV)

(dBuVolts) 39.425 47.97 PK 37.7

-35.5

-9.5 40.67 39.223 48.17 PK 38.5

-36

-9.5 41.17 54 54

-13.33

-12.83 74 74

(dB)

-33.33

-32.83 1 2 PK - Peak detector Page 145 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 11. AC POWER LINE CONDUCTED EMISSIONS DATE: AUGUST 02, 2014 LIMITS FCC 15.207 (a) TEST PROCEDURE The EUT is placed on a non-conducting table 40 cm from the vertical ground plane and 80 cm above the horizontal ground plane. The EUT is configured in accordance with ANSI C63.4. The receiver is set to a resolution bandwidth of 9 kHz. Peak detection is used unless otherwise noted as quasi-peak or average. Line conducted data is recorded for both NEUTRAL and HOT lines. RESULTS Page 146 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A WORST EMISSIONS Line-L1 .15 - 30MHz Trace Markers DATE: AUGUST 02, 2014 Marker Frequency Meter Det T24 IL L1 LC Cables Corrected CISPR 22 Margin to CISPR 22 Margin to

(MHz) Reading

(dBuV)

(dB) 1&3 (dB) Reading Class B QP Limit (dB) Class B Avg Limit (dB) dBuV

.1635 41.37 PK 1.2

.1635 18.65 Av 1.2

.7665 42.72 PK

.3

.7665 27.26 Av

.3 6.4185 29.81 PK

.2 6.4185 18.09 Av

.2 0 0 0 0

.1

.1 42.57 65.3

-22.73

-

-

19.85 43.02 27.56 30.11 18.39

-

56

-

60

-

-

55.3

-35.45

-12.98

-

-

-

46

-18.44

-29.89

-

-

-

50

-31.61 1 2 3 4 5 6 Line-L2 .15 - 30MHz Trace Markers Marker Frequency Meter Det T24 IL L2 LC Cables Corrected CISPR 22 Margin to CISPR 22 Margin to

(MHz) Reading

(dBuV)

.1635 39.91

.1635 18.55

.7665 41.32

.7665 26.96 6.0675 29.96 6.0675 19.02 7 8 9 10 11 12

(dB) 2&3 (dB) Reading Class B QP Limit (dB) Class B Avg Limit (dB) dBuV 0 0 0 0

.1

.1 41.21 65.3

-24.09

-

-

19.85 41.62 27.26 30.26 19.32

-

56

-

60

-

-

55.3

-35.45

-14.38

-

-29.74

-

-

46

-

50

-

-18.74

-

-30.68 1.3 1.3

.3

.3

.2

.2 PK Av PK Av PK Av Page 147 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A LINE 1 RESULTS DATE: AUGUST 02, 2014 Page 148 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A LINE 2 RESULTS DATE: AUGUST 02, 2014 Page 149 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. REPORT NO: 14U17673-E10C FCC ID: BCG-E2816A 12. DYNAMIC FREQUENCY SELECTION Refer to Model A1586 FCC UNII WLAN report, section 12. DATE: AUGUST 02, 2014 Page 150 of 158 UL VERIFICATION SERVICES INC. 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FORM NO: CCSUP4701J FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc.