Welcome. Youre watching Apple TV. This guide contains all the information you need to get from setup to your sofa. Contents Chapter 1: Connect. 7 Whats in the Box 8 Apple TV at a Glance 10 What You Need 11 Setting Up Apple TV Chapter 2: Configure. 16 Network Configuration 17 Connecting to iTunes Chapter 3: Watch. 20 Using Your Apple Remote 21 Basic Remote Functions 21 Pairing Apple TV with a Remote 22 Unpairing Apple TV from a Remote 23 Changing the Remote Battery 24 Renting Movies and Purchasing TV Shows Contents 3 Chapter 4: Problem? No Problem. 26 Troubleshooting 31 Status Light 32 Service and Support 32 Serial Number 33 Care and Cleaning 4 Contents 1 Connect. www.apple.com/support/appletv With Apple TV, you can rent high-definition movies, purchase TV shows, watch streaming content from Netflix, and enjoy podcasts, YouTube and Vimeo videos, and Internet radio. And, you can stream your personal iTunes content wirelessly from a Mac or PC, and view photos from your computer or Flickr on your widescreen HDTV, from the comfort of your couch. And with AirPlay, you can wirelessly stream videos, music, and photos from your iPhone, iPad, and iPod touch to Apple TV. Note: Content availability varies by region. For information about What you need to get started Setting up Apple TV Setting up your network connection Using the Apple Remote Troubleshooting Apple TV Apple TV safety and warranty See What You Need on page 10 Setting Up Apple TV on page 11 Network Configuration on page 16 Using Your Apple Remote on page 20 Troubleshooting on page 26 The Apple TV Important Product Information Guide 6 Chapter 1 Connect. Whats in the Box AC power cord Apple Remote Note: Your power cord may look different from the one pictured here. Chapter 1 Connect. 7 Apple TV at a Glance IR receiver Status light Power port G Ethernet port HDMI port d Micro USB port Optical digital audio port 8 Chapter 1 Connect. IR receiver Use with the included Apple Remote to control Apple TV. Status light The status light flashes slowly when Apple TV starts up. When Apple TV is on, the status light glows. See Status Light on page 31. Micro USB port For service and diagnostics. d Power port Connect the included AC power cord to the power port on Apple TV. G Ethernet port If your network is Ethernet-based, connect an Ethernet cable. HDMI port Connect Apple TV to the HDMI port of a high-definition TV using an HDMI cable. Optical digital audio port Connect Apple TV to a home theater receiver that has an optical digital audio port, using an optical digital audio (also called S/PDIF or TOSLINK) cable. Z Built-in 802.11n Wi-Fi technology Connect Apple TV to your wireless network. Chapter 1 Connect. 9 What You Need To start using Apple TV, you need the following:
High-Definition TV A high-definition TV capable of displaying 720p video Cables An HDMI cable to connect Apple TV to your TV An optical digital audio cable (if you plan to use one) Network An 802.11b, g, or n Wi-Fi wireless network (wireless video streaming requires 802.11g or 802.11n), or 10/100Base-T Ethernet network A broadband Internet connection (DSL, cable, or LAN) Your wireless network name and password (if you use one) Software and Accounts To play content from a Mac or PC on Apple TV, you need the following:
An Apple ID to rent movies or purchase TV shows from the iTunes store, and to use Home Sharing to stream content from a Mac or PC iTunes 10.2 or later A Netflix account to stream content 10 Chapter 1 Connect. Setting Up Apple TV Apple TV connects to your TV through an HDMI port that delivers both audio and video. Before you set up Apple TV, look at the ports on the back of your TV to make sure you have the right cables. You can connect Apple TV to a high-definition TV or home theater receiver that has an HDMI port, using an HDMI cable for both video and audio. You can also use an optical digital audio cable to connect Apple TV to a receiver for audio. Important: Before you connect Apple TV to a power outlet, carefully read these installation instructions and the safety information in the included Important Product Information Guide. Chapter 1 Connect. 11 Step 1: Connecting the cables 1 Connect one end of an HDMI cable to the back of your TV. 2 Connect the other end of the cable to the HDMI port on the back of Apple TV. 3 If youre using an optical digital audio cable for audio, connect one end of the cable to the audio input port on your receiver or TV, and the other end to the optical digital audio port on the back of Apple TV. HDMI port HDMI port Apple TV HDMI cable Television Note: The built-in 802.11 Wi-Fi technology connects Apple TV to your wireless network. If your network is Ethernet-based, connect Apple TV to your network using an Ethernet cable. 12 Chapter 1 Connect. Step 2: Connect the power cord Connect one end of the power cord to the power port on the back of Apple TV and the other end to a power outlet. Power port Important: Dont place anything on top of Apple TV. Objects placed on top may interfere with the wireless signal. Dont place Apple TV on other electronic equipment in a media cabinet. Step 3: Turn on your TV and select the input The first time you use Apple TV, it helps you choose a language, select a network, and configure Apple TV to work with your network (if necessary). See Chapter 2, Configure. on page 15. If you see just a black screen the first time you use Apple TV, make sure the input setting youve selected on your TV matches the input you connected the cables to on your TV or home theater receiver. See Chapter 4, Problem? No Problem. on page 25, and refer to the documentation that came with your TV for information about its inputs. Chapter 1 Connect. 13 2 Configure. www.apple.com/support/appletv Apple TV helps you select and configure your wireless network connection, and, if you want to watch or listen to the contents of your iTunes library, connect to iTunes on your computer. Network Configuration Have your network name and password (if you use one) and your Apple Remote handy when you configure Apple TV. Make sure there are no obstructions between the remote and Apple TV. For information about using your remote, see Chapter 3, Watch. on page 19. If you:
Use a wired Ethernet network to connect, Apple TV automatically detects your network. Use a wireless network to connect, Apple TV helps you select and configure your network connection. Connecting to Your Wireless Network Apple TV helps you connect to your wireless network. If you use a name and password to access your network, have them ready. Use the Apple Remote to:
1 Select your network from the list, or enter your network name if the network is hidden. 2 Enter your network password (if you use one). 16 Chapter 2 Configure. If you dont connect using DHCP, you may need to enter your IP address, subnet mask, router address, and DNS address. To complete the network connection, follow the onscreen instructions. Connecting to iTunes To access the content in your iTunes library on Apple TV, you need iTunes 10.2 or later installed on your computer. For a complete list of system requirements, see Software and Accounts on page 10. Updating Your iTunes Software You can update to the latest version of iTunes. On a Mac, use Software Update to update to the latest version of iTunes. To use Software Update, choose Apple () > Software Update. On a Windows-based computer, go to iTunes Help to update to the latest version of iTunes. Open iTunes, and then choose Help > Check for Updates. Setting Up Home Sharing After you set up your network connection, you need to set up iTunes and Apple TV to share the contents of your iTunes library. Use Home Sharing in iTunes and on Apple TV to share the iTunes library of any computer on your local network that has Home Sharing set up. Chapter 2 Configure. 17 To set up Home Sharing in iTunes:
1 Open iTunes on your computer. 2 Choose Advanced > Turn On Home Sharing. 3 Type your Apple ID and password, and then click Create Home Share. 4 Repeat steps 1 through 3 on each computer you want to use for Home Sharing. For more information about iTunes, open iTunes and choose Help > iTunes Help. To set up Home Sharing on Apple TV:
1 On Apple TV, choose Settings > Computers. 2 Choose Turn On Home Sharing, and then enter the same Apple ID and password you entered on your computer. 18 Chapter 2 Configure. 3 Watch. www.apple.com/support/appletv Read on to learn about pairing and using your Apple Remote with Apple TV. Using Your Apple Remote Use the Apple Remote to control Apple TV settings and navigate your content. Make sure there are no obstructions between the remote and Apple TV. Up Left Down Menu Select Right MENU Play/Pause 20 Chapter 3 Watch. Basic Remote Functions Your Apple Remote has the basic functions described below. To Move through the menu options Select an option from a menu Return to a previous menu Return to the main menu Reset Apple TV Pair Apple TV and a remote Do this Press Up, Down, Left, or Right Press Select Press Menu Hold down Menu Hold down Menu and Down until the Apple TV status light blinks rapidly Hold down Menu and Right for 6 seconds Up and Down on the Apple Remote dont control the volume on your TV or home theater receiver. Use the remote that came with your TV or receiver to change the volume. Pairing Apple TV with a Remote The Apple Remote works with the built-in IR receiver on Apple TV. You can set Apple TV to work only with the included remote by pairing Apple TV and the remote. Chapter 3 Watch. 21 To pair Apple TV with the included remote:
1 Choose Settings from the Apple TV main menu. 2 Choose General > Remotes > Pair Apple Remote. You can also hold down Menu and Right for 6 seconds to pair Apple TV and the Apple Remote. When you successfully pair your Apple Remote, Apple TV displays a chainlink
) above a picture of a remote. Apple TV now works only with the symbol (
paired remote. Unpairing Apple TV from a Remote If you lose the Apple Remote that you paired Apple TV with, you can use any Apple Remote to unpair Apple TV from the lost remote by holding down Menu and Left for 6 seconds. You can also follow these steps. To unpair Apple TV from a paired remote:
1 Choose Settings from the Apple TV main menu. 2 Choose General > Remotes > Unpair Apple Remote. When you successfully unpair the lost remote, Apple TV displays a broken chainlink symbol (
with a different remote.
) above a picture of a remote. You can now pair Apple TV 22 Chapter 3 Watch. Changing the Remote Battery When the battery charge in your Apple Remote is low, Apple TV displays a picture of a remote and a warning symbol (). Replace the battery with a CR2032 battery. Battery compartment To replace the battery:
1 Use a coin to remove the battery compartment cover. 2 Remove the battery. 3 Insert a CR2032 battery with the positive side () facing up. 4 Replace the battery compartment cover and use a coin to tighten it. Important: Dispose of the used battery according to your local environmental laws and guidelines. Chapter 3 Watch. 23 Renting Movies and Purchasing TV Shows You can rent standard or high-definition movies and purchase TV shows directly on Apple TV (where available). Follow the onscreen instructions to find out when a rented movie expires. Purchased TV shows dont expire. When a rented movie expires, its no longer available for playback. To watch it again, you can rent it again from iTunes. Note: Rented movies are not available in all regions. 24 Chapter 3 Watch. 4 Problem? No Problem. www.apple.com/support/appletv Most problems with Apple TV can be solved quickly by following the advice in this chapter. For additional tips and troubleshooting information, see the Apple TV Support page at www.apple.com/support/appletv. Troubleshooting If you have a problem with Apple TV, theres usually a quick and simple solution. First, make sure:
The cables between Apple TV and your TV are pushed in all the way. The power cords for Apple TV and your TV are securely connected to a working power source. Your TV is turned on and set to the correct input. Apple TV is connected to your network. Go to the Settings menu on Apple TV, select Network, and see if Apple TV has an IP address. Your network and Internet connections are on and working properly. If you still have trouble, try resetting your equipment by disconnecting Apple TV, your TV, your wireless networking equipment or base station, and your router from the power outlet. Wait 30 seconds, and then reconnect everything. If the remote isnt working Point the remote directly at Apple TV. If you paired Apple TV with an Apple Remote, make sure youre using the paired remote. 26 Chapter 4 Problem? No Problem. If the Apple TV status light flashes once when you press buttons on the paired remote, the problem isnt with the remote. See If you can see a picture but Apple TV isnt responding on page 28. If youre using an unpaired remote, the Apple TV status light flashes three times. If you paired Apple TV with an Apple Remote and you cant find the paired remote, set Apple TV to work with any Apple Remote by holding down Menu and Left for 6 seconds on another remote. Make sure the front of Apple TV isnt blocked. If Apple TV displays a picture of a remote and a warning symbol (), you need to replace the battery in the remote. See Changing the Remote Battery on page 23. If Apple TV cant access the network Check the IP address Apple TV is using. If it starts with 169.x.x.x, the router or base station may not be configured properly. Check to see if DHCP access is available, or configure Apple TV with a manual IP address. Check for any obstructions, and adjust the location of the base station or Apple TV. If security is enabled on the network, temporarily disable it on the base station and try connecting again. Apple TV cannot connect to a wireless network that contains high (extended) ASCII or double-byte (Unicode) characters (such as Japanese, Korean, or Chinese) in the name or password. If your network has security enabled, make sure you enter the correct password. Chapter 4 Problem? No Problem. 27 If your TV screen appears fuzzy or black Make sure youre using the correct HDMI cable and that its connected firmly to Apple TV and to your TV. Make sure the input setting on your TV matches the input port the HDMI cable is connected to. For information, see the documentation that came with your TV. Make sure your HDTV supports 720p video. If you can see a picture but Apple TV isnt responding Hold down Menu on the Apple Remote to return to the Apple TV main menu. Make sure your TV is turned on and functioning properly. For information, see the documentation that came with your TV. If you paired an Apple Remote with Apple TV, make sure youre using the paired remote. See Pairing Apple TV with a Remote on page 21. Reset Apple TV by doing one of the following:
Hold down both Menu and Down on the Apple Remote until the Apple TV status light blinks rapidly. Disconnect Apple TV from the power outlet, wait about five seconds, and then reconnect it. Choose General > Reset Settings from the main menu on Apple TV. 28 Chapter 4 Problem? No Problem. If Apple TV doesnt respond, try restoring it On Apple TV, choose Settings > General > Reset, and then select Restore. Restoring Apple TV can take some time, so be patient. If your network doesnt use DHCP, choose Configure TCP/IP and enter the TCP/IP configuration. If Apple TV still doesnt respond:
Disconnect the power and HDMI cables from Apple TV. Connect one end of a micro USB cable (sold separately) to the back of Apple TV, and the other end to your computer. Open iTunes on your computer, select Apple TV in the Source list, and then click Restore. If you cant hear sound If Apple TV is connected to a home theater receiver, make sure the receiver is turned on. Make sure the input setting you selected on your TV or receiver matches the input you have your audio cable connected to. For more information, see the documentation that came with your receiver. Make sure the volume on your TV or receiver is turned up and isnt muted. Make sure youre using the correct audio cable and that its connected firmly to Apple TV and to your TV or receiver. If youre using the HDMI port for audio, make sure your TV supports audio through its HDMI port. The HDMI ports on some older TVs support only video. Chapter 4 Problem? No Problem. 29 If Apple TV isnt playing your photo albums or slideshows Make sure you have photos in your photo library or in a folder on your computer. Make sure Apple TV and the computer youre using are set up for Home Sharing. See Setting Up Home Sharing on page 17. Make sure the photos you want to share are selected. In iTunes, choose Advanced > Choose Photos to Share, and then select the photos you want to share. Make sure Apple TV and your computer are on the same local network. Make sure Apple TV and your computer are using the same Home Sharing account. If noise is coming from your TV speakers:
If your TV or speakers support Dolby Digital audio, make sure the Dolby Digital Out setting is correct for your TV or speakers. On Apple TV, choose Settings >
Audio & Video > Dolby Digital Out, and select On or Off. If you dont see your iTunes library under Computers on Apple TV:
Make sure Apple TV and your computer are on the same local network. Make sure Apple TV and iTunes are using the same account name and password. 30 Chapter 4 Problem? No Problem. Status Light The status light on the front of Apple TV indicates whats happening. If Apple TV is On Off or in standby Starting up Accepting a command from the remote Rejecting a command from the remote
(you paired a remote with Apple TV, but youre using a remote thats not paired) Having problems The status light Glows Is off Flashes slowly Flashes once Flashes three times Flashes quickly Chapter 4 Problem? No Problem. 31 Service and Support More information about using Apple TV is available in iTunes onscreen help and on the web. The following table describes where to get software and service information. To learn about Service and support, discussions, tutorials, and Apple software downloads Using iTunes Using iPhoto (in Mac OS X) Safety and regulatory compliance information Do this Go to: www.apple.com/support/appletv Open iTunes and choose Help > iTunes Help. For an onscreen iTunes tutorial (available in some areas only), go to:
www.apple.com/support/itunes Open iPhoto and choose iPhoto > iPhoto Help See the Important Product Information Guide that comes with Apple TV. Serial Number The serial number is printed on the bottom of Apple TV. You can also find the serial number in the Apple TV Settings menu. On Apple TV, choose Settings >
General > About. 32 Chapter 4 Problem? No Problem. Care and Cleaning NOTICE: Failure to follow these care and cleaning instructions could result in damage to Apple TV or other property. Using Connectors and Ports Never force a connector into a port. Check for obstructions on the port. If the connector and port dont join with reasonable ease, they probably dont match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Keeping Apple TV Within Acceptable Temperatures Operate Apple TV in a place where the temperature is always between 0 and 40 C (32 to 104 F). Keeping the Outside of Apple TV Clean To clean Apple TV, unplug the power cord and all cables. Then use a soft, lint-free cloth. Avoid getting moisture in openings. Dont use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean Apple TV. Disposing of Apple TV Properly For information about the proper disposal of Apple TV, and for other important regulatory compliance information, see the Important Product Information Guide. Chapter 4 Problem? No Problem. 33 Apple Store and iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works, 1992-1997 Dolby Laboratories, Inc. All rights reserved. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. KK Apple Inc. 2011 Apple Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Apple 1 Infinite Loop Cupertino, CA 95014 408-996-1010 www.apple.com The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. Use of the keyboard Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. Apple, the Apple logo, AirPlay, Apple TV, iPad, iPhone, iPhoto, iPod touch, iTunes, Mac, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.