all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
Users Manual 1 | Users Manual | 137.01 KiB | November 09 2018 | |||
1 2 3 4 |
|
Users Manual 2 | Users Manual | 288.77 KiB | November 09 2018 | |||
1 2 3 4 |
|
Internal Photographs | Internal Photos | 4.41 MiB | November 09 2018 | |||
1 2 3 4 |
|
External Photographs | External Photos | 3.86 MiB | November 09 2018 | |||
1 2 3 4 |
|
FCC ID Label and Location | ID Label/Location Info | 211.92 KiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 | Antenna Separation Distance | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 | Antenna Specs | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 |
|
Authorization Letter | Attestation Statements | 35.59 KiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 | Block Diagram | Block Diagram | September 11 2018 | confidential | ||||
1 2 3 4 |
|
Bluetooth Test Report | Test Report | 3.97 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
Confidentiality Request Letter | Cover Letter(s) | 67.71 KiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
RF Exposure Info 1 | RF Exposure Info | 5.39 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
RF Exposure Info 2 | RF Exposure Info | 4.81 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 | RT Correspondence | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 |
|
SAR Test Setup Photographs | Test Setup Photos | 358.28 KiB | November 09 2018 | |||
1 2 3 4 | Schematics | Schematics | September 11 2018 | confidential | ||||
1 2 3 4 | Technical Description | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 |
|
Test Setup Photographs | Test Setup Photos | 299.22 KiB | November 09 2018 | |||
1 2 3 4 | Tune-Up Procedure | Parts List/Tune Up Info | September 11 2018 | confidential | ||||
1 2 3 4 |
|
Bluetooth HDR Test Report | Test Report | 3.85 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
Bluetooth LE Test Report | Test Report | 3.24 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
WLAN Test Report | Test Report | 3.38 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
2G3G Test Report | Test Report | 2.48 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
LTE Test Report 1 | Test Report | 5.29 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
LTE Test Report 2 | Test Report | 5.33 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
LTE Test Report 3 | Test Report | 3.67 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 |
|
Part 90 Test Report | Test Report | 1.34 MiB | November 09 2018 / December 09 2018 | |||
1 2 3 4 | Parts List | Parts List/Tune Up Info | September 11 2018 | confidential | ||||
1 2 3 4 | Technical Description 1 | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 | Technical Description 2 | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 | Test Guidance | Operational Description | September 11 2018 | confidential | ||||
1 2 3 4 |
|
NFC Test Report | Test Report | 1.14 MiB | November 09 2018 / December 09 2018 |
1 2 3 4 | Users Manual 1 | Users Manual | 137.01 KiB | November 09 2018 |
AppleWatch Info AppleWatch User Guide Before using Apple Watch, review the user guide at help.apple.com/watch. You can also use Apple Books to download the guide (where available) or, after pairing, open the AppleWatch app on iPhone and tap My Watch, then go to General> About> View the AppleWatch User Guide. Retain documentation for future reference. Safety and Handling See Safety and Handling in the AppleWatch User Guide. AppleWatch, some of the bands, and the AppleWatch Magnetic Charging Cable contain magnets. AppleWatch and the heart rate sensor are not medical devices. Exposure to Radio Frequency Energy For radio frequency exposure information for AppleWatch, open the AppleWatch app on iPhone and tap My Watch, then go to General> About> Legal> RFExposure. Or go to www.apple.com/
legal/rfexposure. Avoiding Hearing Damage To prevent possible hearing damage, do not listen at high volume levels for long periods. More information about sound and hearing is available online at www.apple.com/sound and in Important safety information in the AppleWatch User Guide. Apple will either repair, replace, or refund your AppleWatch at its own discretion. Warranty benefits are in addition to rights provided under local consumer laws. You may be required to furnish proof of purchase details when making a claim under this warranty. Battery The lithium-ion battery in AppleWatch should be serviced by Apple or an authorized service provider. You may receive a replacement AppleWatch when ordering battery service. Batteries must be recycled or disposed of separately from household waste. For information about battery service and recycling, go to www.apple.com/batteries/service-and-recycling. Medical Device Interference Apple Watch, some of the bands, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock contain magnets that may interfere with medical devices. See Important safety information in the AppleWatch User Guide. Apple One-Year Limited Warranty Summary Apple warrants the included hardware product and accessories against defects in materials and workmanship for one year from the date of original retail purchase. Apple does not warrant against normal wear and tear, nor damage caused by accident or abuse. To obtain service, call Apple or visit an Apple Store or an Apple Authorized Service Provideravailable service options are dependent on the country in which service is requested and may be restricted to the original country of sale. Call charges and international shipping charges may apply, depending on the location. Subject to the full terms and detailed information on obtaining service available at www.apple.com/legal/warranty and support.apple.com, if you submit a valid claim under this warranty, For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Apple Pty Ltd, PO Box A2629, Sydney South, NSW 1235. Tel: 133-622. For Brazilian Consumers: Warranty benefits are in addition to rights provided under local consumer laws, except for the 1-year warranty that already comprises the full term of legal warranty provided by the Brazilian consumer defense code/regulations. Regulatory For regulatory information, certification, and compliance marks specific to AppleWatch, go to Settings> General> Regulatory on Apple Watch. Additional regulatory information is in Safety and Handling in the AppleWatch User Guide. ISED Canada and FCC Compliance Statement for AppleWatch and AppleWatch Magnetic Charging Cable This device complies with ISED Canada license-exempt RSS standard(s). This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Important: This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. ISED Canada CAN ICES-3 (B)/NMB-3(B) EU Compliance Statement Apple Inc. hereby declares that this wireless device is in compliance with Directive 2014/53/EU. A copy of the EU Declaration of Conformity, including device frequency bands and maximum radio-frequency power, is available at www.apple.com/euro/compliance. The CE marking on Apple Watch is located in the band attachment slot. Apples EU representative is Apple Distribution International, Hollyhill Industrial Estate, Cork, Ireland. Use Restriction This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range. This restriction applies in: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK. European UnionDisposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. 2018 Apple Inc. All rights reserved. Apple, the Apple logo, AppleWatch, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Apple Books is a trademark of Apple Inc. Apple Store is a service mark of Apple Inc., registered in the U.S. and other countries. Printed in XXXX. 034-02706-A
1 2 3 4 | Users Manual 2 | Users Manual | 288.77 KiB | November 09 2018 |
Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide Important safety information
!
WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to Apple Watch or other property. Read all the safety information below before using Apple Watch. Handling Handle Apple Watch with care. Apple Watch cases are made of various materials that include the following:
Aluminum Apple Watch case7000 series aluminum, Ion-X glass (strengthened glass), composite back
(plastic) Stainless Steel Apple Watch caseStainless steel, sapphire crystal, ceramic back Ceramic Apple Watch caseCeramic, sapphire crystal, ceramic back Apple Watch contains sensitive electronic components and can be damaged if dropped, burned, punctured, or crushed. Apple Watch cases made of ceramic may chip or crack if dropped or subjected to forceful impact. Dont use a damaged Apple Watch, such as one with a cracked screen or case, visible liquid intrusion, or a damaged band, as it may cause injury. Avoid heavy exposure to dust or sand. Repairing Dont open Apple Watch and dont attempt to repair Apple Watch yourself. Disassembling Apple Watch may damage it, result in loss of water resistance, and may cause injury to you. If Apple Watch is damaged or malfunctions, contact Apple or an Apple Authorized Service Provider. You can find more information about getting service at support.apple.com/watch/repair/service. Battery Dont attempt to replace the Apple Watch battery yourselfyou may damage the battery, which could cause overheating and injury. The lithium-ion battery in Apple Watch should be serviced only by Apple or an authorized service provider. You may receive a replacement Apple Watch (in place of your original device) when ordering battery service. Batteries must be recycled or disposed of separately from household waste. Dont incinerate the battery. For information about battery service and recycling, see www.apple.com/batteries/service-and-recycling. Distraction Using Apple Watch in some circumstances can distract you and may cause a dangerous situation (for example, avoid reading a text message while driving a car). Observe rules that prohibit or restrict the use of mobile devices. Navigation Maps, directions, and location-based apps depend on data services. These data services are subject to change and may not be available in all areas, resulting in maps, directions, or location-based information that may be unavailable, inaccurate, or incomplete. Some Maps features require Location Services. Compare the information provided on Apple Watch to your surroundings and defer to posted signs to resolve any discrepancies. Do not use these services while performing activities that require your full attention. Always comply with posted signs and the laws and regulations in the areas where you are using Apple Watch, and always use common sense. Charging To charge Apple Watch, use the Apple Watch Magnetic Charging Cable and power adapter. You may also use third-party 5W power adapters featuring an MFi logo. Its important to keep Apple Watch, the Apple Watch Magnetic Charging Cable, and the power adapter in a well-ventilated area when charging. Using an Apple Watch Magnetic Charging Dock thats damaged, using a third-party charging solution that doesnt feature an MFi logo, or charging Apple Watch when moisture is present, can cause fire, electric shock, injury, or damage to Apple Watch or other property. Be sure Apple Watch and the Apple Watch Magnetic Charging Cable or Apple Watch Magnetic Charging Dock are dry before charging. When you use the Apple Watch Magnetic Charging Cable or Apple Watch Magnetic Charging Dock to charge Apple Watch, make sure that the USB plug is fully inserted into the adapter before you plug the adapter into a power outlet. Avoid charging Apple Watch in direct sunlight. Dont wear Apple Watch while it is charging. Prolonged heat exposure Apple Watch, the Apple Watch Magnetic Charging Cable, the Apple Watch Magnetic Charging Dock, and the power adapter comply with applicable surface temperature standards and limits. However, even within these limits, sustained contact with warm surfaces for long periods of time may cause discomfort or injury. Apple Watch, the Apple Watch Magnetic Charging Cable, the Apple Watch Magnetic Charging Dock, and the power adapter will become warm when plugged in to a power source. Use of cellular on Apple Watch (GPS + Cellular) or Apple Watch Series 4 (GPS + Cellular) may make the device feel warm. Use common sense to avoid situations where your skin is in contact with Apple Watch, the Apple Watch Magnetic Charging Cable, the Apple Watch Magnetic Charging Dock, or the power adapter for long periods of time when theyre plugged in. For example, while Apple Watch is charging or while the Apple Watch Magnetic Charging Cable, the Apple Watch Magnetic Charging Dock, or the power adapter are plugged in to a power source, dont sleep on them or place them under a blanket, pillow, or your body. Take special care if you have a physical condition that affects your ability to detect heat against the body. Remove Apple Watch if it becomes uncomfortably warm. Hearing loss Listening to sound at high volumes may damage your hearing. Background noise, as well as continued exposure to high volume levels, can make sounds seem quieter than they actually are. Turn on audio playback and check the volume before inserting a Bluetooth connected headset in your ear. For more information about hearing loss, go to the Sound and Hearing website. WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods. Radio frequency exposure Apple Watch uses radio signals to connect to wireless networks. For information about radio frequency (RF) energy resulting from radio signals and steps you can take to minimize exposure, open the Apple Watch app on iPhone, tap My Watch, then tap General > About >
Legal > RF Exposure or visit www.apple.com/legal/rfexposure. Radio frequency interference Observe signs and notices that prohibit or restrict the use of electronic devices. Although Apple Watch, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock are designed, tested, and manufactured to comply with regulations governing radio frequency emissions, such emissions from Apple Watch, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock can negatively affect the operation of other electronic equipment, causing them to malfunction. Unplug the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock, and turn off Apple Watch or use Airplane Mode when use is prohibited, such as while traveling in aircraft, or when asked to do so by authorities. Medical device interference Apple Watch contains components and radios that emit electromagnetic fields. Apple Watch, some of the bands, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock contain magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and defibrillators. Consult your physician and medical device manufacturer for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and Apple Watch, its bands, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock. Stop using Apple Watch, its bands, the Apple Watch Magnetic Charging Cable, and the Apple Watch Magnetic Charging Dock if you suspect they are interfering with your medical device. Not a medical device Apple Watch, its operating systems, and the heart rate sensors are not medical devices. They are not designed or intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment, or prevention of disease. Medical conditions Before starting or modifying any exercise program using Apple Watch, consult your physician. Be careful and attentive while exercising. Stop exercising immediately if you feel pain, or feel faint, dizzy, exhausted, or short of breath. By exercising, you assume all associated inherent risks including any injury that may result from such activity. If you have any medical condition that you believe could be affected by Apple Watch (for example, seizures, blackouts, eyestrain, or headaches), consult with your physician prior to using Apple Watch. Explosive and other atmospheric conditions Charging or using Apple Watch in any area with a potentially explosive atmosphere, such as areas where the air contains high levels of flammable chemicals, vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Exposing Apple Watch to environments having high concentrations of industrial chemicals, including near evaporating liquified gasses such as helium, may damage or impair Apple Watch functionality. Obey all signs and instructions. High-consequence activities Apple Watch is not intended for use where the failure of the device could lead to death, personal injury, or severe environmental damage. Choking hazard Some Apple Watch bands may present a choking hazard to small children. Keep these bands away from small children. Skin sensitivities Some people may experience reactions to certain materials used in jewelry, watches, and other wearable items that are in prolonged contact with their skin. This can be due to allergies, environmental factors, extended exposure to irritants like soap, sweat, or other causes. You may be more likely to experience irritation from any wearable device if you have allergies or other sensitivities. If you have known skin sensitivities, please take special care when wearing Apple Watch. You may be more likely to experience irritation from Apple Watch if you wear it too tightly. Remove Apple Watch periodically to allow your skin to breathe. Keeping Apple Watch and the band clean and dry will reduce the possibility of skin irritation. If you experience redness, swelling, itchiness, or any other irritation or discomfort on your skin around, or beneath, your Apple Watch, please remove Apple Watch and consult your physician before resuming wear. Continued use, even after symptoms subside, may result in renewed or increased irritation. Apple Watch models with a stainless steel or aluminum case, the stainless steel portions of some Apple Watch bands, the metallic portions of Herms bands, and the magnets in the watch and bands contain some nickel. Nickel exposure from these materials is unlikely, but customers with known nickel allergies should be attentive when wearing them until they can determine they are not experiencing an allergic reaction. The Apple Watch case, and the Apple Watch bands contain trace amounts of acrylates and methacrylates. Acrylates and methacrylates are found in many consumer products that come in contact with the skin, such as adhesive bandages. Some people may be sensitive to them, or may develop sensitivities over time. Apple Watch and its bands are designed so that parts containing acrylates and methacrylates are not in direct contact with your skin. The materials used in Apple Watch and the Apple Watch bands meet the standards set for jewelry by the U.S. Consumer Product Safety Commission, applicable European regulations, and other international standards. Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide Important handling information
!
Exposure to liquid Apple Watch is water resistant but not waterproof. You may, for example, wear and use Apple Watch during exercise (exposure to sweat is OK), in the rain, and while washing your hands. If water splashes onto the watch, wipe it off with a nonabrasive, lint-free cloth. Try to minimize exposing Apple Watch to perfume, soap, solvents, detergent, acids or acidic foods, soapy water, insect repellent, lotions, sunscreen, oil, or hair dye. Follow the instructions below in the Cleaning and care section if Apple Watch comes into contact with them. Apple Watch Series 1 and Apple Watch (1st generation) have a water resistance rating of IPX7 under IEC standard 60529. Apple Watch Series 1 and Apple Watch (1st generation) are splash and water resistant, but submerging Apple Watch Series 1 and Apple Watch (1st generation) is not recommended. Apple Watch Series 2, Apple Watch Series 3, and Apple Watch Series 4 have a water resistance rating of 50 meters under ISO standard 22810:2010. This means that they may be used for shallow water activities like swimming in a pool or ocean. However, Apple Watch Series 2, Apple Watch Series 3, and Apple Watch Series 4 should not be used for scuba diving, water skiing, or other activities involving high velocity water or submersion below shallow depth. Water resistance is not a permanent condition and may diminish over time. Apple Watch cannot be rechecked or resealed for water resistance. The following may affect the water resistance of Apple Watch in particular and should be avoided:
Dropping Apple Watch or subjecting it to other impacts. Exposing Apple Watch to soap or soapy water, for example while showering or bathing. Exposing Apple Watch to perfume, solvents, detergent, acids or acidic foods, insect repellent, lotions, sunscreen, oil, or hair dye. Exposing Apple Watch to high velocity water, for example while water skiing. Wearing Apple Watch in the sauna or steam room. Not all bands are appropriate for water use. For example, the stainless steel and leather bands are not water resistant and should not be exposed to liquids. Cleaning and care Keep Apple Watch clean and dry. Clean and dry Apple Watch, the band, and your skin after workouts or heavy sweating. Dry Apple Watch and the band thoroughly if they are exposed to fresh water. Clean Apple Watch if it comes in contact with anything that may cause stains or other damage, such as dirt or sand, makeup, ink, soap, detergent, acids or acidic foods, or comes in contact with liquids other than fresh water, including those that may lead to skin irritation such as sweat, salt water, soapy water, pool water, perfume, insect repellent, lotions, sunscreen, oil, adhesive remover, hair dye, or solvents. The Apple Watch and band colors may vary or fade over time. After swimming with Apple Watch Series 2, Apple Watch Series 3, or Apple Watch Series 4, gently rinse it with warm tap water. How to clean Apple Watch:
Turn off Apple Watch. Press and hold the side button, then drag the Power Off slider to the right. Depress the band release buttons and remove the band. See Remove, change, and fasten Apple Watch bands. Wipe Apple Watch clean with a nonabrasive, lint-free cloth. If necessary, you can also lightly dampen the cloth with fresh water. Dry Apple Watch with a nonabrasive, lint-free cloth. To help avoid damaging Apple Watch, observe the following:
Dont clean Apple Watch while its charging. Dont dry Apple Watch or the bands using any external heat source (for example, a hair dryer). Dont use cleaning products, ultrasonic cleaners, or compressed air when cleaning your Apple Watch. The front of Apple Watch is made of Ion-X glass (strengthened glass) or sapphire crystal, each with a fingerprint-resistant oleophobic (oil repellent) coating. This coating wears over time with normal usage. Cleaning products and abrasive materials will further diminish the coating, and may scratch the glass or the sapphire crystal. Using buttons, Digital Crown, connectors, and ports Never apply excessive pressure to a button or the Digital Crown on Apple Watch, or force a charging connector into a port, because this may cause damage that is not covered under the warranty. If the connector and port dont join with reasonable ease, they probably dont match. Check for obstructions and make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Certain usage patterns can contribute to the fraying or breaking of cables. The cable attached to a charging unit, like any other metal wire or cable, is subject to becoming weak or brittle if repeatedly bent in the same spot. Aim for gentle curves instead of angles in the cable. Regularly inspect the cable and connector for any kinks, breaks, bends, or other damage. Should you find any such damage, discontinue use of the cable. Magnetic Charging Cable and Magnetic Charging Dock Discoloration of the charging surface of the Apple Watch Magnetic Charging Cable, the Apple Watch, and the Apple Watch Magnetic Charging Dock may occur after regular use due to dirt and debris that come in contact with the magnetic surface. This is normal. Cleaning the magnetic charging surface may reduce, or prevent, such discoloration, and will help to prevent damage to your charger and Apple Watch. To clean the charging surface, disconnect the charger from both Apple Watch and the power adapter and wipe with a damp, nonabrasive cloth. Dry with a nonabrasive, lint-free cloth before resuming charging. Do not use cleaning products when cleaning the charging surface. Operating temperature Apple Watch is designed to work best in ambient temperatures between 32 and 95 F (0 and 35 C) and be stored in temperatures between -4 and 113 F (-20 and 45 C). Apple Watch can be damaged and battery life shortened if stored or operated outside of these temperature ranges. Avoid exposing Apple Watch to dramatic changes in temperature or humidity. If the interior temperature of Apple Watch exceeds normal operating temperatures (for example, in a hot car or in direct sunlight for extended periods of time), you may experience the following as it attempts to regulate its temperature:
Charging may slow or stop. The display may dim. A temperature warning screen may appear. Some data transfer may be paused or delayed. Some apps may close. On Apple Watch Series 3 (GPS + Cellular) or Apple Watch Series 4 (GPS + Cellular), you might not have a cellular connection or you might not be able to make or receive calls. Normal cellular functionality resumes after Apple Watch cools. However, you can still make emergency calls. Important: You may not be able to use Apple Watch while the temperature warning screen is displayed. If Apple Watch cant regulate its internal temperature, it goes into Power Reserve or a deep sleep mode until it cools. Move Apple Watch to a cooler location out of direct sunlight and wait a few minutes before trying to use Apple Watch again. For more information, see the Apple Support article Keep Apple Watch within acceptable operating temperatures. Magnets Keep key cards and credit cards away from Apple Watch, the bands, the Apple Watch Magnetic Charging Cable, the Apple Watch, and the Apple Watch Magnetic Charging Dock.
!
Previous Important safety information Next Band care information
"
Support Apple Watch User Guide Important handling information More ways to shop: Visit an Apple Store, call 1-800-MY-APPLE, or find a reseller. Copyright 2018 Apple Inc. All rights reserved. Privacy Policy Terms of Use Sales and Refunds Site Map Contact Apple United States Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide Band care information
!
Many third parties make accessory bands for Apple Watch. Such bands may not fit properly; may interfere with the Apple Watch Wrist Detect feature; may contain materials that cause skin sensitivities or other health concerns; and may even damage Apple Watch. For best results, use only Apple branded or Apple authorized bands. How to clean Apple-branded bands Remove the band from Apple Watch before cleaning. See Remove, change, and fasten Apple Watch bands. Note: This cleaning information applies to Apple-branded bands only. For all other bands, follow the care information provided with the band. For the leather portions of the bands, wipe them clean with a nonabrasive, lint-free cloth, lightly dampened with fresh water (if necessary). After cleaning, let the band air dry thoroughly before re-
attaching to Apple Watch. Dont store leather bands in direct sunlight, at high temperatures, or in high humidity. Dont soak leather bands in water. Leather bands are not water resistant. For all other bands and clasps, wipe them clean with a nonabrasive, lint-free cloth, lightly dampened with fresh water (if necessary). Dry the band thoroughly with a nonabrasive, lint-free cloth before re-attaching to Apple Watch. Stainless steel bands are not water resistant.
!
Previous Important handling information Next FCC compliance statement
"
Support Apple Watch User Guide Band care information More ways to shop: Visit an Apple Store, call 1-800-MY-APPLE, or find a reseller. Copyright 2018 Apple Inc. All rights reserved. Privacy Policy Terms of Use Sales and Refunds Site Map Contact Apple United States Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide FCC compliance statement
!
For Apple Watch, Apple Watch Magnetic Charging Cable, and Apple Watch Magnetic Charging Dock This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Important: Changes or modifications to this product not authorized by Apple could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Responsible party (contact for FCC matters only):
Apple Inc. One Apple Park Way, MS 911-AHW Cupertino, CA 95014 http://www.apple.com/contact Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide ISED Canada compliance statement
!
For Apple Watch, Apple Watch Magnetic Charging Cable, and Apple Watch Magnetic Charging Dock This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
!
Previous FCC compliance statement Next Disposal and recycling information
"
Support Apple Watch User Guide ISED Canada compliance statement More ways to shop: Visit an Apple Store, call 1-800-MY-APPLE, or find a reseller. Copyright 2018 Apple Inc. All rights reserved. Privacy Policy Terms of Use Sales and Refunds Site Map Contact Apple United States Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide Disposal and recycling information
!
Apple Watch disposal and recycling Your Apple Watch and/or battery should not be disposed of with household waste. Dispose of your Apple Watch and/or battery in accordance with local environmental laws and guidelines. For information about the recycling program at Apple and recycling collection points, visit www.apple.com/recycling. For information about restricted substances and other environmental initiatives at Apple, visit www.apple.com/environment. European UnionDisposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Brasil Informaes sobre descarte e reciclagem O smbolo acima indica que este produto e/ou sua bateria no devem ser descartados no lixo domstico. Quando decidir descartar este produto e/ou sua bateria, faa-o de acordo com as leis e diretrizes ambientais locais. Para informaes sobre substncias de uso restrito, o programa de reciclagem da Apple, pontos de coleta e telefone de informaes, visite www.apple.com/br/environment. Informacin sobre eliminacin de residuos y reciclaje El smbolo de arriba indica que este producto y/o su batera no debe desecharse con los residuos domsticos. Cuando decidas desechar este producto y/o su batera, hazlo de conformidad con las leyes y directrices ambientales locales. Para obtener informacin sobre el programa de reciclaje de Apple, puntos de recoleccin para reciclaje, sustancias restringidas y otras iniciativas ambientales, visite www.apple.com/la/environment o www.apple.com/mx/environment. Battery service The lithium-ion battery in Apple Watch should be serviced by Apple or an authorized service provider. You may receive a replacement Apple Watch when ordering battery service. Batteries must be recycled or disposed of separately from household waste. For more information about battery service and recycling, go to www.apple.com/batteries/service-and-recycling. Australia Battery Disposal For more information, visit http://www.apple.com/au/recycling. Battery Charger System Efficiency Trkiye Trkiye Cumhuriyeti:
AEEE Ynetmeliine Uygundur. Taiwan Battery Statement China Battery Statement
!
Previous ISED Canada compliance statement Next Apple and the environment
"
Support Apple Watch User Guide Disposal and recycling information More ways to shop: Visit an Apple Store, call 1-800-MY-APPLE, or find a reseller. Copyright 2018 Apple Inc. All rights reserved. Privacy Policy Terms of Use Sales and Refunds Site Map Contact Apple United States Apple Watch User Guide watchOS 5.0 Communities Contact Support Browse Topics for Apple Watch User Guide Apple and the environment
!
At Apple, we recognize our responsibility to minimize the environmental impacts of our operations and products. For more information, go to www.apple.com/environment.
!
Previous Disposal and recycling information Support Apple Watch User Guide Apple and the environment More ways to shop: Visit an Apple Store, call 1-800-MY-APPLE, or find a reseller. Copyright 2018 Apple Inc. All rights reserved. Privacy Policy Terms of Use Sales and Refunds Site Map Contact Apple United States
1 2 3 4 | Internal Photographs | Internal Photos | 4.41 MiB | November 09 2018 |
A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007
\
A1975 A2007 A1975 A2007
1 2 3 4 | External Photographs | External Photos | 3.86 MiB | November 09 2018 |
A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007 A1975 A2007
1 2 3 4 | FCC ID Label and Location | ID Label/Location Info | 211.92 KiB | November 09 2018 / December 09 2018 |
Electronic Labeling A1975 Electronic Label The regulatory information is programmed in a secured manner. Users or third parties cannot modify the regulatory information page on the device. Instructions to user Extracted from Info Guide Packaging Label One Apple Park Way, Cupertino, CA 95014 USA
1 2 3 4 | Authorization Letter | Attestation Statements | 35.59 KiB | November 09 2018 / December 09 2018 |
August 22, 2018 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern:
I, the undersigned, hereby authorize PCTEST Engineering Laboratory, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benets, that includes FCC benets, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing PCTEST Engineering Laboratory, Inc. as our representative, we still recognize that we are responsible to:
A. comply with the relevant provisions of the certication program;
B. make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;
C. make claims regarding certication only in respect of the scope for which certication has been granted;
D. do not use our product certication in such a manner as to bring the Certication Division into disrepute and not make any statement regarding our product certication which the Certication Division may consider misleading or unauthorized;
E. upon suspension or cancellation of certication, discontinue use of all advertising matter that contains any reference thereto and return any certication documents as required by the Certication Division;
F. use certication only to indicate the products are certied as being in conformity with specied standards;
G. endeavor to ensure that no certicate or report nor any part thereof is used in a misleading manner;
H. ensure that any reference to our product certication in communication media such as documents, brochures or advertising, complies with the requirements of the Certication Division;
I. J. keep a record of all complaints made known to us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;
take appropriate action with respect to such complaints and any deciencies found in products or services that affect compliance with the requirements for certication;
K. document the actions taken. This authorization is valid until further written notice from the applicant. Marc Douat Compliance Engineer Apple Inc. One Apple Park Way Cupertino, CA 95014
1 2 3 4 | Bluetooth Test Report | Test Report | 3.97 MiB | November 09 2018 / December 09 2018 |
Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
IC:
APPLICANT:
Application Type:
Model/HVIN:
EUT Type:
Max. RF Output Power:
Frequency Range:
Type of Modulation:
FCC Classification:
FCC Rule Part(s):
ISED Specification:
Test Procedure(s):
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 Bluetooth Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-08.BCG BCG-A1975 579C-A1975 Apple Inc. Certification A1975 Watch 70.226 mW (18.47 dBm) Peak Conducted 2402 2480MHz GFSK, /4-DQPSK, 8DPSK FCC Part 15 Spread Spectrum Transmitter (DSS) Part 15 Subpart C (15.247) RSS-247 Issue 2 ANSI C63.10-2013 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 74 T A B L E O F C O N T E N T S 1.0 INTRODUCTION .......................................................................................................................................... 3 1.1 Scope ................................................................................................................................................................... 3 1.2 PCTEST Test Location ......................................................................................................................................... 3 1.3 Test Facility / Accreditations ................................................................................................................................. 3 2.0 PRODUCT INFORMATION .......................................................................................................................... 4 2.1 Equipment Description ......................................................................................................................................... 4 2.2 Device Capabilities ............................................................................................................................................... 4 2.3 Antenna Description ............................................................................................................................................. 4 2.4 Test Support Equipment ....................................................................................................................................... 5 2.5 Test Configuration ................................................................................................................................................ 5 2.6 Software and Firmware ........................................................................................................................................ 5 2.7 EMI Suppression Device(s)/Modifications ............................................................................................................ 7 3.0 DESCRIPTION OF TESTS .......................................................................................................................... 8 3.1 Evaluation Procedure ........................................................................................................................................... 8 3.2 AC Line Conducted Emissions ............................................................................................................................. 8 3.3 Radiated Emissions .............................................................................................................................................. 9 3.4 Environmental Conditions ..................................................................................................................................... 9 ANTENNA REQUIREMENTS .................................................................................................................... 10 MEASUREMENT UNCERTAINTY ............................................................................................................. 11 TEST EQUIPMENT CALIBRATION DATA ................................................................................................ 12 TEST RESULTS ......................................................................................................................................... 13 7.1 Summary ............................................................................................................................................................ 13 7.2 20dB Bandwidth Measurement .......................................................................................................................... 14 7.3 Output Power Measurement ............................................................................................................................... 22 7.4 Band Edge Compliance ...................................................................................................................................... 24 7.5 Carrier Frequency Separation ............................................................................................................................ 35 7.6 Time of Occupancy............................................................................................................................................. 38 7.7 Number of Hopping Channels ............................................................................................................................ 41 7.8 Conducted Spurious Emissions .......................................................................................................................... 44 7.9 Radiated Spurious Emission Measurements Above 1GHz .............................................................................. 51 Radiated Restricted Band Edge Measurements ............................................................................................. 58 7.10 7.11 Radiated Spurious Emissions Measurements Below 1GHz ........................................................................ 66 Line Conducted Measurement Data ............................................................................................................... 70 7.12 CONCLUSION ............................................................................................................................................ 74 4.0 5.0 6.0 7.0 8.0 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 74 1 . 0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01. 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 74 2 . 0 P R O D U C T I N F O R M A T I O N 2.1 Equipment Description The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The test data contained in this report pertains only to the emissions due to the EUTs Bluetooth transmitter. This Bluetooth module has been tested by a Bluetooth Qualification Lab, and we confirm the following:
A) The hopping sequence is pseudorandom B) All channels are used equally on average C) The receiver input bandwidth equals the transmit bandwidth D) The receiver hops in sequence with the transmit signal 15.247(g): In accordance with the Bluetooth Industry Standard, the system is designed to comply with all of the regulations in Section 15.247 when the transmitter is presented with a continuous data (or information) system. 15.247(h): In accordance with the Bluetooth Industry Standard, the system does not coordinate its channels selection/
hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. 15.247(h): The EUT employs Adaptive Frequency Hopping (AFH) which identifies sources of interference namely devices operating in 802.11 WLAN and excludes them from the list of available channels. The process of re-mapping reduces the number of test channels from 79 channels to a minimum number of 20 channels. Device Capabilities Test Device Serial No.: C89WP003K473, D92WW00XKK89 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC Ch. 00
:
39
:
78 Frequency (MHz) 2402
:
2441
:
2480 Table 2-1. Frequency/ Channel Operations Note: This device is capable of operating in hopping and non-hopping mode. The EUT can hop between 79 different channels in the 2400 2483.5MHz band. The maximum achievable duty cycles for all modes were determined based on measurements performed on a spectrum analyzer in zero-span mode with RBW = 8MHz, VBW = 50MHz, and detector = peak per the guidance of Section 6.0 b) of ANSI C63.10-2013 and KDB 558074 D01 v04. The RBW and VBW were both greater than 50/T, where T is the minimum transmission duration, and the number of sweep points across T was greater than 100. The duty cycles are as follows:
FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 74 Duty Cycle (%)ePA100.0iPA100.0ePA100.0iPA100.0ePA100.0iPA100.0Maximum Achievable Duty CyclesBluetooth ModeGFSK8DPSK/4-DQPSK Table 2-2. Measured Duty Cycles Antenna Description 2.3 Following antenna was used for the testing. Frequency [GHz]
2.4 Antenna Gain
(dBi)
-12.2 Table 2-3. Antenna Peak Gain Note: This device is capable of operating in hopping and non-hopping mode. The EUT can hop between 79 different channels in the 2400 2483.5MHz band. 2.4 Test Support Equipment Table 2-4. Test Support Equipment Used Test Configuration 2.5 The EUT was tested per the guidance of KDB 558074 D01 v04. ANSI C63.10-2013 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. See Sections 3.2 for AC line conducted emissions test setups, 7.9 for radiated emissions test setups, and 7.2, 7.3, 7.4, 7.5, and 7.6 for antenna port conducted emissions test setups. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel, and various types of wristbands, metal and non-metal wristbands The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. For AC line conducted and radiated test below 1GHz, following configuration were investigated and worst case was reported.
- EUT powered by AC/DC adaptor via USB cable with wireless charger
- EUT powered by host PC via USB cable with wireless charger FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 74 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A
/4-DQPSK has been investigated and confirmed as not the worst case. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 74 Software and Firmware 2.6 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.7 EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and no modifications were made during testing. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 74 3 . 0 D E S C R I P T I O N O F T E S T S Evaluation Procedure AC Line Conducted Emissions 3.1 The measurement procedure described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) was used in the measurement of the EUT. Deviation from measurement procedure.....................................None 3.2 The line-conducted facility is located inside a 7m x 3.66m x 2.7m shielded enclosure. The shielded enclosure is manufactured by AP Americas. The shielding effectiveness of the shielded room is in accordance with MIL-Std-
285 or NSA 65-6. A 1m x 1.5m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H Line-Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. The external power line filter is EPCOS 2X60A Power Line Filter (100dB Attenuation, 14kHz-18GHz) and the two EPCOs 2X48A filters (100dB Minimum Insertion Loss, 14kHz 10GHz). These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference groundplane. Power cables for support equipment were routed down to the second LISN while ensuring that the cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions is used for final measurements on the same test site. The analyzer is set to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final measurements. Line conducted emissions test results are shown in Section 7.12. Automated test software was used to perform the AC line conducted emissions testing. Automated measurement software utilized is Rohde & Schwarz EMC32, Version 9.15.0. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 74 Radiated Emissions 3.3 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. An 80cm tall test table made of Styrodur is placed on top of the turn table. For measurements above 1GHz, an additional Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33 depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. 3.4 The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar). Environmental Conditions FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 74 4 . 0 A N T E N N A R E Q U I R E M E N T S Excerpt from 15.203 of the FCC Rules/Regulations:
An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The antennas of the EUT are permanently attached. There are no provisions for connection to an external antenna. Conclusion:
The EUT complies with the requirement of 15.203. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 74 5 . 0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Conducted Disturbance Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 3.09 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 74 6 . 0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 6-1. Annual Test Equipment Calibration Schedule Notes:
1. For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. 2. Equipment with a calibration date of N/A shown in this list was not used to make direct calibrated measurements. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 74 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number AnritsuML2495APower Meter11/28/2017Annual11/28/20181039008AnritsuMA2411BPower Sensor 10MHz-40GHz11/28/2017Annual11/28/20181027293COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063Rohde & Schwarz HFH2-Z2 Loop Antenna 3/13/2018Annual 3/13/2019100519 7 . 0 T E S T R E S U L T S 7.1 Summary Company Name:
FCC ID:
Apple Inc. BCG-A1975 Method/System:
Frequency Hopping Spread Spectrum (FHSS) Number of Channels:
79 FCC Part Section(s) RSS Section(s) Test Description Test Limit Test Test Condition Result Reference 15.247(a)(1)(iii) RSS-247 [5.1(a)]
20dB Bandwidth N/A PASS Section 7.2 15.247(b)(1) RSS-247 [5.4(b)] Peak Transmitter Output Power 15.247(a)(1) RSS-247 [5.1(b)] Channel Separation 1 Watt if > 75 non-
overlapping channels used
> 2/3 of 20 dB BW for systems with Output Power < 125mW PASS Section 7.3 PASS Section 7.5 CONDUCTED 15.247(a)(1)(iii) RSS-247 [5.1(d)] Number of Channels
> 15 Channels PASS Section 7.7 15.247(a)(1)(iii) RSS-247 [5.1(d)]
Time of Occupancy
< 0.4 sec in 31.6 sec period 15.247(d) RSS-247 [5.5]
Band Edge / Out-of-Band Emissions Conducted > 20dBc PASS Section 7.6 PASS Section 7.3.1, Section 7.8 15.205 15.209 RSS-Gen [8.9]
General Field Strength Limits (Restricted Bands and Radiated Emission Limits) Emissions in restricted bands must meet the radiated limits detailed in 15.209 (RSS-247 limits) RADIATED PASS Section 7.9, Section 7.10, Section 7.11 15.207 RSS-Gen [8.8]
AC Conducted Emissions 150kHz 30MHz
< FCC 15.207 limits
(RSS-Gen [8.8] limits) LINE CONDUCTED PASS Section 7.12 Notes:
1) All modes of operation and data rates were investigated. The test results shown in the following sections Table 7-1. Summary of Test Results represent the worst case emissions. 2) The analyzer plots shown in this section were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables, directional couplers, and attenuators used as part of the system to maintain a link between the call box and the EUT at all frequencies of interest. 3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables, attenuators, and couplers. 4) For conducted spurious emissions, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST BT Auto, Version 3.5. 5) For radiated band edge, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST Chamber Automation, Version 0.2.15. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 74 20dB Bandwidth Measurement 7.2 15.247 (a.1.iii); RSS-247 [5.1(1)]
Test Overview and Limit The bandwidth at 20dB down from the highest in-band spectral density is measured with a spectrum analyzer connected to the receive antenna while the EUT is operating in transmission mode at the appropriate frequencies. Test Procedure Used ANSI C63.10-2013 Section 6.9.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability of the spectrum analyzer was used to to perform X = 20. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. the 20dB bandwidth measurement. The X dB bandwidth parameter was set 2. RBW = 1 5% OBW 3. VBW 3 x RBW 4. Reference level set to keep signal from exceeding maximum input mixer level for linear operation. 5. Detector = Peak 6. Trace mode = max hold 7. Sweep = auto couple 8. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-1. Test Instrument & Measurement Setup Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 74 Table 7-2. Conducted 20dB Bandwidth Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 74 24021.0GFSKePA0948.8024411.0GFSKePA39947.4024801.0GFSKePA78946.9024021.0GFSKiPA0947.2024411.0GFSKiPA39946.2024801.0GFSKiPA78946.7024023.08DPSKePA01353.0024413.08DPSKePA391355.0024803.08DPSKePA781353.0024023.08DPSKiPA01352.0024413.08DPSKiPA391354.0024803.08DPSKiPA781353.0020dB Bandwidth Test Results [kHz]Frequency [MHz]Data Rate [Mbps]Channel No.Mod.Power Scheme Plot 7-1. 20dB Bandwidth Plot (Bluetooth, GFSK, ePA Ch. 0) Plot 7-2. 20dB Bandwidth Plot (Bluetooth, GFSK, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 74 Plot 7-3. 20dB Bandwidth Plot (Bluetooth, GFSK, ePA Ch. 78) Plot 7-4. 20dB Bandwidth Plot (Bluetooth, GFSK, iPA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 74 Plot 7-5. 20dB Bandwidth Plot (Bluetooth, GFSK, iPA Ch. 39) Plot 7-6. 20dB Bandwidth Plot (Bluetooth, GFSK, iPA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 74 Plot 7-7. 20dB Bandwidth Plot (Bluetooth, 8DPSK, ePA Ch. 0) Plot 7-8. 20dB Bandwidth Plot (Bluetooth, 8DPSK, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 74 Plot 7-9. 20dB Bandwidth Plot (Bluetooth, 8DPSK, ePA Ch. 78) Plot 7-10. 20dB Bandwidth Plot (Bluetooth, 8DPSK, iPA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 74 Plot 7-11. 20dB Bandwidth Plot (Bluetooth, 8DPSK, iPA Ch. 39) Plot 7-12. 20dB Bandwidth Plot (Bluetooth, 8DPSK, iPA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 74 7.3 Output Power Measurement 15.247 (b.1); RSS-247 [5.4(2)]
Test Overview and Limits Measurement is made while the EUT is operating in non-hopping transmission mode. The powers shown below were measured using a spectrum analyzer. Average power measurements are performed using a broadband power meter with a pulse sensor. The maximum permissible output power is 1 Watt. Test Procedure Used ANSI C63.10-2013 Section 7.8.5 ANSI C63.10-2013 Section 11.9.2.3.2 method AVGPM-G Test Settings Peak Power Measurement 1. Span = approximately 5x 20dB bandwidth, centered on hopping channel 2. RBW > 20dB bandwidth of emission being measured 3. VBW RBW 4. Sweep = auto 5. Detector = peak 6. Trace mode = max hold 7. The trace was allowed to stabilize Method AVGPM-G (Average Power Measurement) 1. Average power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The power meter implemented triggering and gating capabilities which were set up such that power measurements were recorded only during the ON time of the transmitter. The trace was averaged over 100 traces to obtain the final measured average power. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 74 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-2. Test Instrument & Measurement Setup for Peak Power Measurement Figure 7-3. Test Instrument & Measurement Setup for Average Power Measurement Note 1. This unit was tested with all possible data rates and the highest peak power is reported with the unit transmitting at GFSK and 8DPSK. 2. The EUT was tested for the average power with a broadband power meter for reporting purposes only. 3. Final results were obtained using calibrated couplers, attenuators and cables. The following formula was Output Power (dBm) = Raw Analyzer Level (dBm) + Cable Loss (dB) + Loss (dB) used:
FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 74 7.3.1 15.247 (b.1); RSS-247 [5.4(b)]
Peak Output Power Measurement Table 7-3. Peak Conducted Output Power Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 74
[dBm][mW]2402GFSKePA017.4555.6162441GFSKePA3918.4770.2262480GFSKePA7816.5545.1342402GFSKiPA012.9319.6112441GFSKiPA3913.5322.5582480GFSKiPA7812.2516.77624028DPSKePA017.0250.36224418DPSKePA3917.5957.45124808DPSKePA7816.1641.30524028DPSKiPA012.4417.54724418DPSKiPA3913.5822.81924808DPSKiPA7811.7414.925Frequency [MHz]Channel No.Mod.Power SchemePeak Conducted Power 7.3.2 Average Output Power Measurement 15.247 (b.1); RSS-247 [5.4(b)]
Table 7-4. Average Conducted Output Power Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 74
[dBm][mW]2402GFSKePA017.3454.2002441GFSKePA3918.0063.0962480GFSKePA7816.4343.9542402GFSKiPA012.7518.8362441GFSKiPA3913.0019.9532480GFSKiPA7812.0415.99624028DPSKePA013.8624.32224418DPSKePA3913.7023.44224808DPSKePA7813.0019.95324028DPSKiPA09.789.50624418DPSKiPA3910.0010.00024808DPSKiPA7810.0010.000Frequency [MHz]Channel No.Mod.Power SchemeAvg Conducted Power Band Edge Compliance the emission bandwidth. The maximum permissible out-of-band emission 7.4 15.247 (d); RSS-247 [5.5]
Test Overview and Limits EUT operates in hopping and non-hopping transmission mode. Measurement is taken at the highest point located outside of is 20 dBc. Test Procedure Used ANSI C63.10-2013 Section 6.10.4 Test Settings level 1. Start and stop frequency were set such that the band edge would be placed in the center of the plot 2. Span was set large enough so as to capture all out of band emissions near the band edge 3. RBW = 100kHz 4. VBW = 300kHz 5. Detector = Peak 6. Number of sweep points 2 x Span/RBW 7. Trace mode = max hold 8. Sweep time = auto couple 9. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-4. Test Instrument & Measurement Setup Test Notes Out of band conducted spurious emissions at the band edge were investigated for all data rates in hopping and non-hopping modes. The worst case emissions were found with the EUT transmitting at 1 Mbps. Band edge emissions were also investigated with the EUT transmitting in all data rates. Plots of the worst case emissions are shown below. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 74 Plot 7-13. Band Edge Plot (Bluetooth with Hopping Disabled, GFSK, ePA Ch. 0) Plot 7-14. Band Edge Plot (Bluetooth with Hopping Disabled, GFSK, ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 74 Plot 7-15. Band Edge Plot (Bluetooth with Hopping Enabled, GFSK, ePA Ch. 0) Plot 7-16. Band Edge Plot (Bluetooth with Hopping Enabled, GFSK, ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 74 Plot 7-17. Band Edge Plot (Bluetooth with Hopping Disabled, GFSK, iPA Ch. 0) Plot 7-18. Band Edge Plot (Bluetooth with Hopping Disabled, GFSK, iPA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 74 Plot 7-19. Band Edge Plot (Bluetooth with Hopping Enabled, GFSK, iPA Ch. 0) Plot 7-20. Band Edge Plot (Bluetooth with Hopping Enabled, GFSK, iPA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 74 Plot 7-21. Band Edge Plot (Bluetooth with Hopping Disabled, 8DPSK, ePA Ch. 0) Plot 7-22. Band Edge Plot (Bluetooth with Hopping Disabled, 8DPSK, ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 74 Plot 7-23. Band Edge Plot (Bluetooth with Hopping Enabled, 8DPSK, ePA Ch. 0) Plot 7-24. Band Edge Plot (Bluetooth with Hopping Enabled, 8DPSK, ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 74 Plot 7-25. Band Edge Plot (Bluetooth with Hopping Disabled, 8DPSK, iPA Ch. 0) Plot 7-26. Band Edge Plot (Bluetooth with Hopping Disabled, 8DPSK, iPA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 74 Plot 7-27. Band Edge Plot (Bluetooth with Hopping Enabled, 8DPSK, iPA Ch. 0) Plot 7-28. Band Edge Plot (Bluetooth with Hopping Enabled, 8DPSK, iPA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 74 Carrier Frequency Separation 7.5 15.247 (a.1); RSS-247 [5.1(2)]
Test Overview and Limit Measurement is made with EUT operating in hopping mode. The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. Test Procedure Used ANSI C63.10-2013 Section 7.8.2 Test Settings 1. Span = Wide enough to capture peaks of two adjacent channels 2. RBW = 30% of channel spacing. Adjust as necessary to best identify center of each individual channel 3. VBW RBW 4. Sweep = Auto 5. Detector = Peak 6. Trace mode = max hold 7. The trace was allowed to stabilize. 8. Marker-delta function used to determine separation between peaks of the adjacent channels Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. Test Instrument & Measurement Setup Test Notes The EUT complies with the minimum channel separation requirement when it is operating in 1x/EDR mode using 79 channels and when operating in AFH mode using 20 channels. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 74 Table 7-5. Minimum Channel Separation FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 74 24021.0GFSKePA00.633Pass24411.0GFSKePA390.632Pass24801.0GFSKePA780.631Pass24021.0GFSKiPA00.631Pass24411.0GFSKiPA390.631Pass24801.0GFSKiPA780.631Pass24023.08DPSKePA00.902Pass24413.08DPSKePA390.903Pass24803.08DPSKePA780.902Pass24023.08DPSKiPA00.901Pass24413.08DPSKiPA390.903Pass24803.08DPSKiPA780.902PassPass/FailFrequency [MHz]Data Rate [Mbps]Channel No.Mod.Power SchemeMin. Channel Separation [MHz]
Plot 7-29. Channel Spacing Plot (Bluetooth, GFSK, ePA) Plot 7-30. Channel Spacing Plot (Bluetooth, 8DPSK, ePA) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 74 Time of Occupancy 7.6 15.247 (a.1.iii); RSS-247 [5.1(4)]
Test Overview and Limit Measurement is made while EUT is operating in hopping mode with the spectrum analyzer set to zero span. The maximum permissible time of occupancy is 400 ms within a period of 400ms multiplied by the number of hopping channels employed. Test Procedure Used ANSI C63.10-2013 Section 7.8.4 Test Settings 1. Span = zero span, centered on a hopping channel 2. RBW channel spacing and >> 1/T, where T is expected dwell time per channel 3. Sweep = as necessary to capture entire dwell time. Second plot may be required to demonstrate two successive hops on a channel 4. Trigger is set with appropriate trigger delay to place pulse near the center of the plot 5. Detector = peak 6. Trace mode = max hold 7. Marker-delta function used to determine transmit time per hop Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-6. Test Instrument & Measurement Setup Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 74 Plot 7-31. Time of Occupancy Plot (Bluetooth, GFSK, ePA) Plot 7-32. Time of Occupancy Plot (Bluetooth, 8DPSK, ePA) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 39 of 74 Bluetooth Time of Occupancy Calculation Typically, Bluetooth 1x/EDR mode has a channel hopping rate of 1600 hops/s. Since 1x/EDR modes use 5 transmit and 1 receive slot, for a total of 6 slots, the Bluetooth transmitter is actually hopping at a rate of 1600 / 6
= 266.67 hops/s/slot o 400ms x 79 hopping channels = 31.6 sec (Time of Occupancy Limit) o Worst case BT has 266.67 hops/second (for 1x/EDR modes with DH5 operation) o 266.67 hops/second / 79 channels = 3.38 hops/second (# of hops/second on one channel) o 3.38 hops/second/channel x 31.6 seconds = 106.67 hops (# hops over a 31.6 second period) o 106.67 hops x 2.889 ms/channel = 308.17 ms (worst case dwell time for one channel in 1x/EDR modes) With AFH, the number of channels is reduced to a minimum of 20 channels and the channel hopping rate is reduced by 50% to 800 hops/s. AFH mode also uses 6 total slots so the Bluetooth transmitter hops at a rate of 800 / 6 = 133.3 hops/s/slot o 400ms x 20 hopping channels = 8 sec (Time of Occupancy Limit) o Worst case BT has 133.3 hops/second/slot (for AFH mode with DH5 operation) o 133.3 hops/s / 20 channels = 6.67 hops/second (# of hops/second on one channel) o 6.67 hops/s / channel x 8 seconds = 53.34 hops (# hops over an 8 second period) o 53.34 hops x 2.889 ms/channel = 154.10 ms (worst case dwell time for one channel in AFH mode) The measured worst case dwell time is below the limit of 0.4s. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 40 of 74 Number of Hopping Channels 7.7 15.247 (a.1.iii); RSS-247 [5.1(4)]
Test Overview and Limit Measurement is made while EUT is operating in hopping mode. This frequency hopping system must employ a minimum of 15 hopping channels. Test Procedure Used ANSI C63.10-2013 Section 7.8.3 Test Settings 1. Span = frequency of band of operation (divided into two plots) 2. RBW < 30% of channel spacing or 20dB bandwidth, whichever is smaller. 3. VBW RBW 4. Sweep = auto 5. Detector = peak 6. Trace mode = max hold 7. Trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-7. Test Instrument & Measurement Setup Test Notes The frequency spectrum was broken up into two sub-ranges to clearly show all of the hopping frequencies. In AFH mode, this device operates using 20 channels so the requirement for minimum number of hopping channels is satisfied. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 41 of 74 Plot 7-33. Low End Spectrum Channel Hopping Plot (Bluetooth, GFSK, ePA) Plot 7-34. High End Spectrum Channel Hopping Plot (Bluetooth, GFSK, ePA) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 42 of 74 Plot 7-35. Low End Spectrum Channel Hopping Plot (Bluetooth, 8DPSK, ePA) Plot 7-36. High End Spectrum Channel Hopping Plot (Bluetooth, 8DPSK, ePA) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 43 of 74 Conducted Spurious Emissions 7.8 15.247 (d); RSS-247 [5.5]
Test Overview and Limit Conducted out-of-band spurious emissions were investigated from 30MHz up to 25GHz to include the 10th harmonic of the fundamental transmit frequency. The maximum permissible out-of-band emission level is 20 dBc. Test Procedure Used ANSI C63.10-2013 Section 7.8.8 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to 25GHz (separated into two plots per channel) 2. RBW = 1MHz* (See note below) 3. VBW = 3MHz 4. Detector = Peak 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-8. Test Instrument & Measurement Setup Test Notes Out-of-band conducted spurious emissions were investigated for all data rates and the worst case emissions were found with the EUT transmitting at 1Mbps. The display line shown in the following plots is the limit at 20dB below the fundamental emission level measured in a 100kHz bandwidth. However, the traces in the following plots are measured with a 1MHz RBW to reduce test time, so the display line may not necessarily appear to be 20dB below the level of the fundamental in a 1MHz bandwidth. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 44 of 74 Plot 7-37. Conducted Spurious Plot (Bluetooth, GFSK, ePA Ch. 0) Plot 7-38. Conducted Spurious Plot (Bluetooth, GFSK, ePA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 45 of 74 Plot 7-39. Conducted Spurious Plot (Bluetooth, GFSK, ePA Ch. 39) Plot 7-40. Conducted Spurious Plot (Bluetooth, GFSK, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 46 of 74 Plot 7-41. Conducted Spurious Plot (Bluetooth, GFSK, ePA Ch. 78) Plot 7-42. Conducted Spurious Plot (Bluetooth, GFSK, ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 47 of 74 Plot 7-43. Conducted Spurious Plot (Bluetooth, 8DPSK, ePA Ch. 0) Plot 7-44. Conducted Spurious Plot (Bluetooth, 8DPSK, ePA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 48 of 74 Plot 7-45. Conducted Spurious Plot (Bluetooth, 8DPSK, ePA Ch. 39) Plot 7-46. Conducted Spurious Plot (Bluetooth, 8DPSK, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 49 of 74 Plot 7-47. Conducted Spurious Plot (Bluetooth, 8DPSK, ePA Ch. 78) Plot 7-48. Conducted Spurious Plot (Bluetooth, 8DPSK, ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 50 of 74 Radiated Spurious Emission Measurements Above 1GHz 7.9 15.205 15.209 15.247 (d); RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at maximum power and at the appropriate frequencies. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR and Table 6 of RSS-Gen (8.10) must not exceed the limits shown in Table 7-6 per Section 15.209 and RSS-
Gen (8.9). Frequency Above 960.0 MHz Field Strength Measured Distance
[V/m]
500
[Meters]
3 Table 7-6. Radiated Limits Test Procedure Used ANSI C63.10-2013 Section 6.6.4.3 Test Settings Average Field Strength Measurements per Section 4.1.4.2.3 of ANSI C63.10-2013 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 1kHz 1/ Hz, where = pulse width in seconds 4. Averaging type was set to RMS to ensure that video filtering was applied in the power domain 5. Detector = peak 6. Sweep time = auto 7. Trace mode = max hold 8. Trace was allowed to stabilize Peak Field Strength Measurements per Section 4.1.4.2.2 of ANSI C63.10-2013 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW is set depending on measurement frequency, as specified in Table 7-7 below 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 51 of 74 Frequency 9 150kHz 0.15 30MHz 30 1000MHz
> 1000MHz RBW 200 300Hz 9 10kHz 100 120kHz 1MHz Table 7-7. RBW as a Function of Frequency Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-9. Radiated Test Setup >1GHz Test Notes 1. All emissions lying in restricted bands specified in 15.205 and Section 8.10 of RSS-Gen are below the limit shown in Table 7-6. 2. No significant radiated emissions were found in the 2310 - 2390MHz restricted band. 3. The antenna is manipulated through typical positions, polarity and length during the tests. The EUT is manipulated through three orthogonal planes. 4. This unit was tested with its standard battery. 5. The spectrum is measured from 9kHz to the 10th harmonic and the worst-case emissions are reported. 6. The duty cycle correction factor was not applied to noise floor measurements. 7. The wide spectrum spurious emissions plots shown on the following pages are used only for the purpose of emission identification. Any emissions found to be within 20dB of the limit are fully investigated and the results are shown in this section. 8. The "-" shown in the following RSE tables are used to denote a noise floor measurement. 9. The duty-cycle correction factor was not applied since the duty cycle for all modes were 100%. 10. Emissions are investigated with and without the WCP and the worst case emissions are reported. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 52 of 74 Sample Calculation o Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m] + Duty Cycle Correction [dB]
o AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
o Margin [dB] = Field Strength Level [dBV/m] Limit [dBV/m]
FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 53 of 74 Radiated Spurious Emission Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
Plot 7-49. Radiated Spurious Plot above 1GHz (BT GFSK ePA Ch. 0) Plot 7-50. Radiated Spurious Plot above 1GHz (BT GFSK ePA Ch. 39) Plot 7-51. Radiated Spurious Plot above 1GHz (BT GFSK ePA Ch. 78) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 54 of 74 Radiated Spurious Emissions Measurements (Above 18GHz) 15.209; RSS-Gen [8.9]
Plot 7-52. Radiated Spurious Plot above 18GHz (GFSK ePA, Ant. Pol. H) Plot 7-53. Radiated Spurious Plot above 18GHz (GFSK ePA, Ant. Pol. V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 55 of 74 Radiated Spurious Emission Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
Worst Case Mode:
Worst Case Data Rate:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth 1 Mbps 3 Meters 2402MHz 0 Table 7-8. Radiated Measurements Worst Case Mode:
Worst Case Data Rate:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth 1 Mbps 3 Meters 2441MHz 39 Table 7-9. Radiated Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 56 of 74 4804.00AvgH1950-78.368.7637.4053.98-16.584804.00PeakH1950-67.858.7647.9173.98-26.0712010.00AvgH113166-83.4920.6244.1353.98-9.8512010.00PeakH113166-70.4220.6257.2073.98-16.78Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Frequency [MHz]Detector4882.00AvgH134359-75.059.0240.9753.98-13.014882.00PeakH134359-66.519.0249.5173.98-24.477323.00AvgH268358-77.3713.0842.7153.98-11.277323.00PeakH268358-68.1213.0851.9673.98-22.0212205.00AvgH - --84.3520.7043.3553.98-10.6312205.00PeakH - --73.1420.7054.5673.98-19.42Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Antenna Height [cm]Turntable Azimuth [degree]Frequency [MHz]DetectorAnt. Pol. [H/V]
Radiated Spurious Emission Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
Worst Case Mode:
Worst Case Data Rate:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth 1 Mbps 3 Meters 2480MHz 78 Table 7-10. Radiated Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 57 of 74 4960.00AvgH10610-72.958.9242.9753.98-11.014960.00PeakH10610-65.888.9250.0473.98-23.947440.00AvgH28965-77.6314.1843.5553.98-10.427440.00PeakH28965-68.5414.1852.6473.98-21.3312400.00AvgH - --85.3421.4243.0853.98-10.9012400.00PeakH - --72.7521.4255.6773.98-18.31Margin [dB]Field Strength [dBV/m]Limit [dBV/m]Antenna Height [cm]Turntable Azimuth [degree]Analyzer Level [dBm]AFCL [dB/m]Frequency [MHz]DetectorAnt. Pol. [H/V]
7.10 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The radiated restricted band edge measurements are measured with an EMI test receiver connected to the receive antenna while the EUT is transmitting. Two different amplitude offsets were used depending on whether peak or average measurements were measured. The average measurements use a duty cycle correction factor
(DCCF). The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain + DCCF Worst Case Mode:
Worst Case Modulation:
Worst Case Power Scheme:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth GFSK ePA 3 Meters 2402MHz 0 Plot 7-54. Radiated Restricted Lower Band Edge Measurement (Average) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 58 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Plot 7-55. Radiated Restricted Lower Band Edge Measurement (Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 59 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Worst Case Mode:
Worst Case Modulation:
Worst Case Power Scheme:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth 8DPSK ePA 3 Meters 2402MHz 0 Plot 7-56. Radiated Restricted Lower Band Edge Measurement (Average) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 60 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Plot 7-57. Radiated Restricted Lower Band Edge Measurement (Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 61 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
Worst Case Mode:
Worst Case Modulation:
Worst Case Power Scheme:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth GFSK ePA 3 Meters 2480MHz 78 Plot 7-58. Radiated Restricted Upper Band Edge Measurement (Average) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 62 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Plot 7-59. Radiated Restricted Upper Band Edge Measurement (Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 63 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Worst Case Mode:
Worst Case Modulation:
Worst Case Power Scheme:
Measurement Distance:
Operating Frequency:
Channel:
Bluetooth 8DPSK ePA 3 Meters 2480MHz 78 Plot 7-60. Radiated Restricted Upper Band Edge Measurement (Average) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 64 of 74 Radiated Restricted Band Edge Measurements 15.205 15.209 15.247 (d); RSS-Gen [8.9]
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Plot 7-61. Radiated Restricted Upper Band Edge Measurement (Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 65 of 74 7.11 Radiated Spurious Emissions Measurements Below 1GHz 15.209; RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for radiated spurious emissions. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR and Table 6 of RSS-Gen (8.10) must not exceed the limits shown in Table 7-11 per Section 15.209 and RSS-Gen (8.9). Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-11. Radiated Limits Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Test Procedures Used ANSI C63.10-2013 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 120kHz (for emissions from 30MHz 1GHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 66 of 74 Test Setup The EUT and measurement equipment were set up as shown in the diagrams below. Figure 7-10. Radiated Test Setup < 30Mhz Figure 7-11. Radiated Test Setup < 1GHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 67 of 74 Test Notes 1. All emissions lying in restricted bands specified in 15.205 and RSS-Gen (8.10) are below the limit shown in Table 7-11. 2. The broadband receive antenna is manipulated through vertical and horizontal polarizations during the tests. The EUT is manipulated through three orthogonal planes. 3. This unit was tested with its standard battery. 4. The spectrum is investigated using a peak detector and final measurements are recorded using CISPR quasi peak detector. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 5. Emissions were measured at a 3 meter test distance. 6. Emissions are investigated while operating on the center channel of the mode, band, and modulation that produced the worst case results during the transmitter spurious emissions testing. 7. No spurious emissions were detected within 20dB of the limit below 30MHz. 8. The results recorded using the broadband antenna is known to correlate with the results obtained by using a tuned dipole with an acceptable degree of accuracy. The VSWR for the measurement antenna was found to be less than 2:1. 9. The wide spectrum spurious emissions plots shown on the following pages are used only for the purpose of emission identification. There were no emissions detected in the 30MHz 1GHz frequency range, as shown in the subsequent plots. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 68 of 74 Radiated Spurious Emissions Measurements (Below 1GHz) 15.209; RSS-Gen [8.9]
Plot 7-62. Radiated Spurious Plot below 1GHz (GFSK, ePA, with Laptop + Adapter attached) Table 7-12. Radiated Spurious Emissions Below 1GHz (GFSK, ePA, with Laptop + Adapter attached) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 69 of 74 0 10 20 30 40 50 60 70 8030M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1V-PK+Preview Result 1H-PK+Critical_Freqs PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-638.58PeakV10024727.33-19.3427.3340.00-12.6787.04PeakV1008221.04-23.6221.0440.00-18.9692.76PeakV10012121.26-23.6521.2643.52-22.26105.71PeakV10014722.78-23.5422.7843.52-20.74347.92PeakV10014719.59-20.5319.5946.02-26.43390.21PeakV10013419.96-19.6119.9646.02-26.06Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
7.12 Line Conducted Measurement Data 15.207; RSS-Gen [8.8]
Test Overview and Limit All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for conducted spurious emissions. Only the conducted emissions of the configuration that produced the worst case emissions are reported in this section. All conducted emissions must not exceed the limits shown in the table below, per Section 15.207 and RSS-Gen (8.8). Frequency of emission Conducted Limit (dBV)
(MHz) 0.15 0.5 0.5 5 5 30 Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Table 7-13. Conducted Limits
*Decreases with the logarithm of the frequency. Test Procedures Used ANSI C63.10-2013, Section 6.2 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = RMS 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 70 of 74 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-12. Test Instrument & Measurement Setup Test Notes 1. 2. 3. 4. All modes of operation were investigated and the worst-case emissions are reported using mid channel. The emissions found were not affected by the choice of channel used during testing. The limit for an intentional radiator from 150kHz to 30MHz are specified in 15.207 and RSS-Gen (8.8). Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB) QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB) 5. Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV) 6. 7. Traces shown in plot are made using a peak detector. Deviations to the Specifications: None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 71 of 74 Plot 7-63. Line-Conducted Test Plot (L1, with WCP + Laptop) Table 7-14. Line-Conducted Test Data (L1, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 72 of 74 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV Plot 7-64. Line-Conducted Test Plot (N, with WCP + Laptop) Table 7-15. Line-Conducted Test Data (N, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 73 of 74 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV 8 . 0 C O N C L U S I O N the Apple Watch The data collected FCC ID: BCG-A1975 is in compliance with Part 15 Subpart C (15.247) of the FCC Rules and RSS-247 of the Innovation, Science and Economic Development Canada Rules. tested and show relate only item(s) that the to FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-08.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 74 of 74
1 2 3 4 | Confidentiality Request Letter | Cover Letter(s) | 67.71 KiB | November 09 2018 / December 09 2018 |
Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject:
FCC ID:
Request for Condentiality BCG-A1975 To Whom It May Concern:
Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), Apple Inc. hereby requests condential treatment for documents led with the Commission in connection with the application for equipment authorization referenced above. Apple Inc. requests that the Commission withholds the following documents from public viewing indenitely:
Schematic Diagram Block Diagram Theory of Operation Antenna Specication Parts List Tune Up Procedure These documents reveal detailed technical and design information that is protected by Apple Inc. as condential and proprietary trade secrets. This information has been disclosed to those required to maintain its condentiality, and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains condential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued:
External Photographs Internal Photographs Test Setup Photographs User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as condential and proprietary trade secrets. This information has been disclosed to those required to maintain its condentiality, and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of condentiality requested is necessary to protect the information until the commercial release of a device. Marc Douat Compliance Engineer Apple Inc. One Apple Park Way Cupertino, CA 95014
1 2 3 4 | RF Exposure Info 2 | RF Exposure Info | 4.81 MiB | November 09 2018 / December 09 2018 |
A P P E N D I X D : S A R T I S S U E S P E C I F I C A T I O N S Measurement Procedure for Tissue verification:
1) The network analyzer and probe system was configured and calibrated. 2) The probe was immersed in the tissue. The tissue was placed in a nonmetallic container. Trapped air bubbles beneath the flange were minimized by placing the probe at a slight angle. 3) The complex admittance with respect to the probe aperture was measured 4) The complex relative permittivity can be calculated from the below equation (Pournaropoulos and Misra):
Y 2 j 0 r
[
]
(
) 2 ln ab
=
b b a a 0 cos
[
exp rj 0 0
'
r
(
r
]
2/1
) ddd where Y is the admittance of the probe in contact with the sample, the primed and unprimed coordinates refer to
. source and observation points, respectively,
, is the angular frequency, and 1=j cos 2r
=
2 22
+
Table D-I Composition of the Tissue Equivalent Matter Frequency (MHz) Tissue Ingredients (% by weight) Bactericide DGBE HEC NaCl Sucrose Water 750 Head 750 Body See page 2-3 See page 2 835 Head 0.1 1 1.45 57 40.45 835 Body 0.1 1 0.94 44.9 53.06 1750 Head 1750 Body 1900 Head 1900 Body 2450 Head 2450 Body 47 0.4 31 0.2 52.6 68.8 44.92 29.44 0.18 54.9 0.39 70.17 See page 4 26.7 0.1 73.2 FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX D:
Page 1 of 4 REV 18.3 M 01/30/2017 Composition of 750 MHz Head and Body Tissue Equivalent Matter Figure D-1 Note: 750MHz liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Figure D-2 750MHz Body Tissue Equivalent Matter FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX D:
Page 2 of 4 REV 18.3 M 01/30/2017 750MHz Head Tissue Equivalent Matter Figure D-3 FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX D:
Page 3 of 4 REV 18.3 M 01/30/2017 Composition of 2.45 GHz Head Tissue Equivalent Matter Figure D-4 Note: 2.45 GHz head liquid recipes are proprietary SPEAG. Since the composition is approximate to the actual liquids utilized, the manufacturer tissue-equivalent liquid data sheets are provided below. Figure D-5 2.45 GHz Head Tissue Equivalent Matter FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX D:
Page 4 of 4 REV 18.3 M 01/30/2017 A P P E N D I X E : S A R S Y S T E M V A L I D A T I O N Per FCC KDB Publication 865664 D02v01r02, SAR system validation status should be documented to confirm measurement accuracy. The SAR systems (including SAR probes, system components and software versions) used for this device were validated against its performance specifications prior to the SAR measurements. Reference dipoles were used with the required tissue- equivalent media for system validation, according to the procedures outlined in FCC KDB Publication 865664 D01v01r04. Since SAR probe calibrations are frequency dependent, each probe calibration point was validated at a frequency within the valid frequency range of the probe calibration point, using the system that normally operates with the probe for routine SAR measurements and according to the required tissue-equivalent media. A tabulated summary of the system validation status including the validation date(s), measurement frequencies, SAR probes and tissue dielectric parameters has been included. SAR System Validation Summary (1g) Table E-I COND. PERM. FREQ. [MHz]
DATE PROBE SN PROBE TYPE PROBE CAL. POINT 750 835 835 1750 1900 2450 2450 2600 4/17/2018 2/7/2018 6/22/2018 7/5/2018 6/18/2018 6/13/2018 4/17/2018 6/19/2018 3329 3288 3287 3022 3022 7490 3131 3119 ES3DV3 ES3DV3 ES3DV3 ES3DV2 ES3DV2 EX3DV4 ES3DV3 ES3DV3 750 835 835 1750 1900 2450 2450 2600 Head Head Head Head Head Head Head Head
() 0.895 0.919 0.889 1.400 1.431 1.834 1.863 1.950
(r) SENSITIVITY 42.645 41.769 41.545 38.589 39.467 40.590 39.590 39.423 PASS PASS PASS PASS PASS PASS PASS PASS Table E-II SAR System Validation Summary (10g) PROBE COND. PERM. CW VALIDATION
(r) SENSITIVITY LINEARITY SYSTEM FREQ. [MHz]
DATE PROBE SN PROBE TYPE PROBE CAL. POINT 750 835 1750 1900 2450 2450 2600 4/24/2018 6/21/2018 6/28/2018 7/2/2018 2/2/2018 6/5/2018 2/2/2018 7490 3119 3022 3022 3288 3275 3288 EX3DV4 ES3DV3 ES3DV2 ES3DV2 ES3DV3 ES3DV3 ES3DV3 750 835 1750 1900 2450 2450 2600 Body Body Body Body Body Body Body
() 0.940 0.968 1.528 1.572 2.037 2.009 2.250 57.400 55.084 51.032 53.288 50.916 52.410 50.297 PASS PASS PASS PASS PASS PASS PASS SAR SYSTEM
#
AM7 AM3 AM8 AM2 AM2 AM5 AM6 AM4 SAR
#
AM5 AM4 AM2 AM2 AM3 AM1 AM3 CW VALIDATION PROBE LINEARITY MOD. VALIDATION DUTY FACTOR PROBE ISOTROPY PASS PASS PASS PASS PASS PASS PASS PASS PROBE ISOTROPY PASS PASS PASS PASS PASS PASS PASS MOD. TYPE N/A GMSK GMSK N/A GMSK OFDM/TDD OFDM/TDD TDD MOD. TYPE N/A GMSK N/A GMSK OFDM/TDD OFDM/TDD TDD N/A PASS PASS N/A PASS PASS PASS PASS N/A PASS N/A PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PAR N/A N/A N/A N/A N/A PASS PASS N/A N/A N/A N/A N/A PASS PASS N/A MOD. VALIDATION DUTY FACTOR PAR NOTE: While the probes have been calibrated for both CW and modulated signals, all measurements were performed using communication systems calibrated for CW signals only. Modulations in the table above represent test configurations for which the measurement system has been validated per FCC KDB Publication 865664 D01v01r04 for scenarios when CW probe calibrations are used with other signal types. SAR systems were validated for modulated signals with a periodic duty cycle, such as GMSK, or with a high peak to average ratio (>5 dB), such as OFDM according to FCC KDB Publication 865664 D01v01r04. FCC ID: BCG-A1975 SAR EVALUATION REPORT Test Dates:
DUT Type:
06/28/18 07/19/18 Watch 2018 PCTEST Engineering Laboratory, Inc. Approved by:
Quality Manager APPENDIX E:
Page 1 of 1 REV 18.3 M 01/30/2017
1 2 3 4 | SAR Test Setup Photographs | Test Setup Photos | 358.28 KiB | November 09 2018 |
A P P E N D I X F : D U T A N T E N N A D I A G R A M & S A R T E S T S E T U P P H O T O G R A P H S FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 1 of 8 REV 18.3 M 01/30/2017 Note: Exact antenna dimensions and separation distances are shown in the Technical Descriptions document. Filing. Figure F-1 DUT Antenna Locations FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 2 of 8 REV 18.3 M 01/30/2017 SAR Test Setup Photo 1: Aluminum with Sport wristband, Front side at 1.0 cm SAR Test Setup Photo 2: Aluminum with Metal Links wristband, Front side at 1.0 cm FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 3 of 8 REV 18.3 M 01/30/2017 SAR Test Setup Photo 3: Aluminum with Metal Loop wristband, Front side at 1.0 cm SAR Test Setup Photo 4: Stainless Steel with Sport wristband, Front side at 1.0 cm FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 4 of 8 REV 18.3 M 01/30/2017 SAR Test Setup Photo 5: Stainless Steel with Metal Links wristband, Front side at 1.0 cm SAR Test Setup Photo 6: Stainless Steel with Metal Loop wristband, Front side at 1.0 cm FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 5 of 8 REV 18.3 M 01/30/2017 SAR Test Setup Photo 7: Aluminum with Sport wristband, Back side at 0.0 cm SAR Test Setup Photo 8: Aluminum with Metal Links wristband, Back side at 0.0 cm FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 6 of 8 REV 18.3 M 01/30/2017 SAR Test Setup Photo 9: Aluminum with Metal Loop wristband, Back side at 0.0 cm SAR Test Setup Photo 10: Stainless Steel with Sport wristband, Back side at 0.0 cm FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 7 of 8 REV 18.3 M 01/30/2017 SAR Test Setup Photo 11: Stainless Steel with Metal Links wristband, Back side at 0.0 cm SAR Test Setup Photo 12: Stainless Steel with Metal Loop wristband, Back side at 0.0 cm FCC ID: BCG-A1975 Test Dates:
06/28/18 07/19/18 DUT Type:
Watch 2018 PCTEST Engineering Laboratory, Inc. SAR EVALUATION REPORT Approved by:
Quality Manager APPENDIX F:
Page 8 of 8 REV 18.3 M 01/30/2017
1 2 3 4 | Test Setup Photographs | Test Setup Photos | 299.22 KiB | November 09 2018 |
T E S T S E T U P P H O T O G R AP H S Test Set-Up Photos 2018 PCTEST Engineering Laboratory, Inc. Apple Inc. FCC ID: BCG-A1975, IC: 579C-A1975 EUT Type: Watch Model: A1975 Page 1 of 5 V 8.1 05/10/2018 Test Set-Up Photos 2018 PCTEST Engineering Laboratory, Inc. Apple Inc. FCC ID: BCG-A1975, IC: 579C-A1975 EUT Type: Watch Model: A1975 Page 2 of 5 V 8.1 05/10/2018 Test Set-Up Photos 2018 PCTEST Engineering Laboratory, Inc. Apple Inc. FCC ID: BCG-A1975, IC: 579C-A1975 EUT Type: Watch Model: A1975 Page 3 of 5 V 8.1 05/10/2018 Test Set-Up Photos 2018 PCTEST Engineering Laboratory, Inc. Apple Inc. FCC ID: BCG-A1975, IC: 579C-A1975 EUT Type: Watch Model: A1975 Page 4 of 5 V 8.1 05/10/2018 Test Set-Up Photos 2018 PCTEST Engineering Laboratory, Inc. Apple Inc. FCC ID: BCG-A1975, IC: 579C-A1975 EUT Type: Watch Model: A1975 Page 5 of 5 V 8.1 05/10/2018
1 2 3 4 | Bluetooth HDR Test Report | Test Report | 3.85 MiB | November 09 2018 / December 09 2018 |
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 Bluetooth (HDR) Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
IC:
APPLICANT:
Application Type:
Model/HVIN:
EUT Type:
Max. RF Output Power:
Frequency Range:
FCC Classification:
FCC Rule Part(s):
ISED Specification:
Test Procedure(s):
Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-06.BCG BCG-A1975 579C-A1975 Apple Inc. Certification A1975 Watch 21.154 mW (13.25 dBm) Peak Conducted 2404 2478MHz Digital Transmission System (DTS) Part 15 Subpart C (15.247) RSS-247 Issue 2 ANSI C63.10-2013, KDB 558074 D01 v05, KDB 648474 D03 v01r04 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013 and KDB 558074 D01 v05. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 67 T A B L E O F C O N T E N T S 1.0 INTRODUCTION .......................................................................................................................................... 3 1.1 Scope ................................................................................................................................................................... 3 1.2 PCTEST Test Location ......................................................................................................................................... 3 1.3 Test Facility / Accreditations ................................................................................................................................. 3 2.0 PRODUCT INFORMATION .......................................................................................................................... 4 2.1 Equipment Description ......................................................................................................................................... 4 2.2 Device Capabilities ............................................................................................................................................... 4 1.1 Antenna Description ............................................................................................................................................. 5 1.2 Test Support Equipment ....................................................................................................................................... 5 2.3 Test Configuration ................................................................................................................................................ 5 2.4 Software and Firmware ........................................................................................................................................ 6 2.5 EMI Suppression Device(s)/Modifications ............................................................................................................ 6 3.0 DESCRIPTION OF TESTS .......................................................................................................................... 7 3.1 Evaluation Procedure ........................................................................................................................................... 7 3.2 AC Line Conducted Emissions ............................................................................................................................. 7 3.3 Radiated Emissions .............................................................................................................................................. 8 3.4 Environmental Conditions ..................................................................................................................................... 8 ANTENNA REQUIREMENTS ...................................................................................................................... 9 MEASUREMENT UNCERTAINTY ............................................................................................................. 10 TEST EQUIPMENT CALIBRATION DATA ................................................................................................ 11 TEST RESULTS ......................................................................................................................................... 12 7.1 Summary ............................................................................................................................................................ 12 7.2 6dB Bandwidth Measurement Bluetooth (HDR) .............................................................................................. 13 7.3 Output Power Measurement Bluetooth (HDR) ................................................................................................ 21 7.3.1 Peak Output Power Measurement - Bluetooth (HDR) .................................................................................... 22 7.3.2 Average Output Power Measurement - Bluetooth (HDR) ............................................................................... 23 7.4 Power Spectral Density Bluetooth (HDR) ........................................................................................................ 24 7.5 Conducted Emissions at the Band Edge ............................................................................................................ 32 7.6 Conducted Spurious Emissions .......................................................................................................................... 37 7.7 Radiated Spurious Emission Measurements ...................................................................................................... 45 7.8 Radiated Restricted Band Edge Measurements ................................................................................................. 54 7.9 Radiated Spurious Emissions Measurements Below 1GHz ............................................................................ 58 7.10 Line-Conducted Test Data .............................................................................................................................. 63 CONCLUSION ............................................................................................................................................ 67 4.0 5.0 6.0 7.0 8.0 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 67 1.0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01. 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 67 2.0 P R O D U C T I N F O R M A T I O N 2.1 Equipment Description The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The data found in this test report was taken with the EUT operating in Bluetooth HDR mode. While in HDR mode, the Bluetooth transmitter hops pseudo-
randomly between 75 channels, three of which are advertising channels. When the transmitter is hopping only between the three advertising channels, the EUT does not fall under the category of a hopper as defined in 15.247(a)(iii) which states that a frequency hopping systems in the 24002483.5 MHz band shall use at least 15 channels. As operation on only the advertising channels does not qualify the EUT as a hopper, the EUT is certified as a DTS device in this mode. The data found in this report is representative of the device when it transmits on its advertising channels. Typical Bluetooth operation is covered under the DSS report found with this application. Test Device Serial No.: C89WP003K473, D92WW00XKK89 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC Device Capabilities Ch. 1
:
38
:
75 Frequency (MHz) 2404
:
2441
:
2478 Table 2-1. Frequency / Channel Operations Table 2-2. Measured Duty Cycle FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 67 Duty Cycle (%)ePA100.0iPA100.0ePA100.0iPA100.0Maximum Achievable Duty CyclesHDR Mode4M8M Antenna Description 1.1 Following antenna was used for the testing. Frequency [GHz]
2.4 Antenna Gain
(dBi)
-12.2 Table 2-3. Antenna Peak Gain Note: This device is capable of operating in hopping and non-hopping mode. The EUT can hop between 75 different channels in the 2404 2478MHz band. 1.2 Test Support Equipment Table 2-4. Test Support Equipment Used Test Configuration 2.3 The EUT was tested per the guidance of ANSI C63.10-2013 and KDB 558074 D01 v05. ANSI C63.10-2013 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. See Sections 3.2 for AC line conducted emissions test setups, 3.3 for radiated emissions test setups, and 7.2, 7.3, 7.4, 7.5, and 7.6 for antenna port conducted emissions test setups. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel, and two types of wristbands, plastic and metal mesh. The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. For AC line conducted and radiated test below 1GHz, following configuration were investigated and worst case was reported.
- EUT powered by AC/DC adaptor via USB cable with wire charger
- EUT powered by host PC via USB cable with wire charger FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 67 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A Software and Firmware 2.4 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.5 EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and/or no modifications were made during testing. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 67 3.0 D E S C R I P T I O N O F T E S T S Evaluation Procedure AC Line Conducted Emissions 3.1 The measurement procedures described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) and the guidance provided in KDB 558074 D01 v05 were used in the measurement of the EUT. Deviation from measurement procedure.....................................None 3.2 The line-conducted facility is located inside a 7m x 3.66m x 2.7m shielded enclosure. The shielded enclosure is manufactured by AP Americas. The shielding effectiveness of the shielded room is in accordance with MIL-Std-285 or NSA 65-6. A 1m x 1.5m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H Line-Impedance Stabilization Networks
(LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. The external power line filter is EPCOS 2X60A Power Line Filter (100dB Attenuation, 14kHz-
18GHz) and the two EPCOs 2X48A filters (100dB Minimum Insertion Loss, 14kHz 10GHz). These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference groundplane. Power cables for support equipment were routed down to the second LISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions is used for final measurements on the same test site. The analyzer is set to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final measurements. Line conducted emissions test results are shown in Section 7.10. Automated test software was used to perform the AC line conducted emissions testing. Automated measurement software utilized is Rohde & Schwarz EMC32, Version 10.20.01. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 67 Radiated Emissions 3.3 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. An 80cm tall test table made of Styrodur is placed on top of the turn table. For measurements above 1GHz, an additional Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33 depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. 3.4 The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar). Environmental Conditions FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 67 4.0 A N T E N N A R E Q U I R E M E N T S Excerpt from 15.203 of the FCC Rules/Regulations:
An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The antenna(s) of the EUT are permanently attached. There are no provisions for connection to an external antenna. Conclusion:
The EUT complies with the requirement of 15.203. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 67 5.0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Line Conducted Disturbance Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 3.09 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 67 6.0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 6-1. Annual Test Equipment Calibration Schedule Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 67 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number AnritsuML2495APower Meter11/28/2017Annual11/28/20181039008AnritsuMA2411BPower Sensor 10MHz-40GHz11/28/2017Annual11/28/20181027293COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Vivaldi Antenna (400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063Rohde & Schwarz HFH2-Z2 Loop Antenna 3/13/2018Annual 3/13/2019100519 7.0 T E S T R E S U L T S Summary 7.1 Company Name:
Apple Inc. FCC ID:
BCG-A1975 FCC Classification:
Digital Transmission System (DTS) Number of Channels:
75 FCC Part Section(s) RSS Section(s) Test Description Test Limit Test Test Condition Result Reference 15.247(a)(2) RSS-247 [5.2]
6dB Bandwidth
> 500kHz PASS Section 7.2 15.247(b)(3) RSS-247 [5.4(4)]
Transmitter Output Power 1 Watt PASS Sections 7.3 15.247(e) RSS-247 [5.2]
Transmitter Power Spectral Density 8dBm / 3kHz Band PASS Section 7.4 CONDUCTED 15.247(d) RSS-247 [5.5]
Band Edge /
Out-of-Band Emissions 20dBc PASS Sections 7.5, 7.6 15.205 15.209 RSS-Gen [8.9]
General Field Strength Limits (Restricted Bands and Radiated Emission Limits) Emissions in restricted bands must meet the radiated limits detailed in 15.209 (RSS-Gen [8.9]) RADIATED PASS Sections 7.7, 7.8, 7.9 15.207 RSS-Gen [8.8]
AC Conducted Emissions 150kHz 30MHz
< FCC 15.207 limits
(RSS-Gen[8.8]) LINE CONDUCTED PASS Section 7.10 Table 7-1. Summary of Test Results Notes:
1. All modes of operation were investigated. The test results shown in the following sections represent the worst case emissions. 2. The analyzer plots shown in this section were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables and attenuators used as part of the system to connect the EUT to the analyzer at all frequencies of interest. 3. All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables and attenuators. 4. For radiated band edge, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST Chamber Automation, Version 0.2.15. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 67 6dB Bandwidth Measurement Bluetooth (HDR) 7.2 15.247(a.2); RSS-247 [5.2]
Test Overview and Limit The bandwidth at 6dB down from the highest in-band spectral density is measured with a spectrum analyzer connected to the transmitter antenna terminal of the EUT while the EUT is operating at maximum power and at the appropriate frequencies. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible 6dB bandwidth is 500 kHz. Test Procedure Used ANSI C63.10-2013 Section 11.8.2 Option 2 KDB 558074 D01 v05 Section 8.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability of the spectrum analyzer was used to perform the 6dB bandwidth measurement. The X dB bandwidth parameter was set to X = 6. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. RBW = 100kHz 3. VBW 3 x RBW 4. Detector = Peak 5. Trace mode = max hold 6. Sweep = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None Figure 7-1. Test Instrument & Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 67 Table 7-2. Conducted Bandwidth Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 67 24044.0ePA1HDR42156500Pass24414.0ePA38HDR42157500Pass24784.0ePA75HDR42165500Pass24044.0iPA1HDR42157500Pass24414.0iPA38HDR42155500Pass24784.0iPA75HDR42165500Pass24048.0ePA1HDR84167500Pass24418.0ePA38HDR84167500Pass24788.0ePA75HDR84228500Pass24048.0iPA1HDR84168500Pass24418.0iPA38HDR84166500Pass24788.0iPA75HDR84228500PassPass / FailMeasured Bandwidth [kHz]Minimum Bandwidth [kHz]Frequency [MHz]Data Rate [Mbps]Power SchemeChannel No.Bluetooth Mode Plot 7-1. 6dB Bandwidth Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 1) Plot 7-2. 6dB Bandwidth Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 38) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 67 Plot 7-3. 6dB Bandwidth Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 75) Plot 7-4. 6dB Bandwidth Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 67 Plot 7-5. 6dB Bandwidth Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 38) Plot 7-6. 6dB Bandwidth Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 67 Plot 7-7. 6dB Bandwidth Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 1) Plot 7-8. 6dB Bandwidth Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 38) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 67 Plot 7-9. 6dB Bandwidth Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 75) Plot 7-10. 6dB Bandwidth Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 67 Plot 7-11. 6dB Bandwidth Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 38) Plot 7-12. 6dB Bandwidth Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 67 7.3 Output Power Measurement Bluetooth (HDR) 15.247(b.3); RSS-247 [5.4(4)]
Test Overview and Limits The transmitter antenna terminal of the EUT is connected to the input of a spectrum analyzer. Measurements are made while the EUT is operating at maximum power and at the appropriate frequencies. The maximum permissible conducted output power is 1 Watt. Test Procedure Used ANSI C63.10-2013 Section 11.9.1.3 ANSI C63.10-2013 Section 11.9.2.3.2 KDB 558074 D01 v05 Section 8.3.1.3 Test Settings Method PKPM1 (Peak Power Measurement) The maximum peak conducted output power may be measured using a broadband peak RF power meter. The power meter shall have a video bandwidth that is greater than or equal to the DTS bandwidth and shall utilize a fast-responding diode detector. Method AVGPM-G (Average Power Measurement) Average power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The power meter implemented triggering and gating capabilities which were set up such that power measurements were recorded only during the ON time of the transmitter. The trace was averaged over 100 traces to obtain the final measured average power. Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-2. Test Instrument & Measurement Setup for Peak and Average Power Measurement Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 67 7.3.1 15.247(b.3), RSS-247 [5.4(d)]
Peak Output Power Measurement - Bluetooth (HDR) Table 7-3. Peak Conducted Output Power Measurements (Bluetooth (HDR) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 67
[dBm][mW]2404ePA1HDR413.2521.1542441ePA38HDR413.2120.9412478ePA75HDR413.0520.1842404iPA1HDR412.7518.8362441iPA38HDR412.4817.7012478iPA75HDR412.5517.9892404ePA1HDR813.1720.7492441ePA38HDR813.1520.6542478ePA75HDR813.0320.0912404iPA1HDR812.8219.1432441iPA38HDR812.4117.4182478iPA75HDR812.5417.947Frequency [MHz]Power SchemeChannel No.Bluetooth ModePeak Conducted Power 7.3.2 Average Output Power Measurement - Bluetooth (HDR) 15.247(b.3), RSS-247 [5.4(d)]
Table 7-4. Average Conducted Output Power Measurements (Bluetooth (HDR) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 67
[dBm][mW]2404ePA1HDR410.2010.4712441ePA38HDR410.5011.2202478ePA75HDR410.4010.9652404iPA1HDR49.709.3332441iPA38HDR49.859.6612478iPA75HDR49.909.7722404ePA1HDR810.2010.4712441ePA38HDR810.5011.2202478ePA75HDR810.3610.8642404iPA1HDR810.0010.0002441iPA38HDR89.829.5942478iPA75HDR89.869.683Frequency [MHz]Power SchemeChannel No.Bluetooth ModeAverage Conducted Power Power Spectral Density Bluetooth (HDR) 7.4 15.247(e); RSS-247 [5.2]
Test Overview and Limit The peak power density is measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at maximum power and at the appropriate frequencies. The maximum permissible power spectral density is 8 dBm in any 3 kHz band. Test Procedure Used ANSI C63.10-2013 Section 11.10.2 Method PKPSD KDB 558074 D01 v05 Section 8.4 Test Settings 1. Analyzer was set to the center frequency of the DTS channel under investigation 2. Span = 1.5 times the DTS channel bandwidth 3. RBW = 3kHz 4. VBW = 1MHz 5. Detector = peak 6. Sweep time = auto couple 7. Trace mode = max hold 8. Trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None Figure 7-3. Test Instrument & Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 67 Table 7-5. Conducted Power Density Measurements (HDR) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 67 24044.0ePA1HDR4-4.778.0-12.7724414.0ePA38HDR4-3.688.0-11.6824784.0ePA75HDR4-5.048.0-13.0424044.0iPA1HDR4-4.838.0-12.8324414.0iPA38HDR4-3.648.0-11.6424784.0iPA75HDR4-4.988.0-12.9824048.0ePA1HDR8-5.268.0-13.2624418.0ePA38HDR8-4.168.0-12.1624788.0ePA75HDR8-5.308.0-13.3024048.0iPA1HDR8-5.308.0-13.3024418.0iPA38HDR8-4.148.0-12.1424788.0iPA75HDR8-5.318.0-13.31Measured Power Spectral Density [dBm]Maximum Permissible Power Density [dBm / 3kHz]Margin [dB]Frequency [MHz]Data Rate [Mbps]Power SchemeChannel No.Bluetooth Mode Plot 7-13. Power Spectral Density Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 1) Plot 7-14. Power Spectral Density Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 38) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 67 Plot 7-15. Power Spectral Density Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 75) Plot 7-16. Power Spectral Density Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 67 Plot 7-17. Power Spectral Density Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 38) Plot 7-18. Power Spectral Density Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 67 Plot 7-19. Power Spectral Density Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 1) Plot 7-20. Power Spectral Density Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 38) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 67 Plot 7-21. Power Spectral Density Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 75) Plot 7-22. Power Spectral Density Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 67 Plot 7-23. Power Spectral Density Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 38) Plot 7-24. Power Spectral Density Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 67 Conducted Emissions at the Band Edge 7.5 15.247(d); RSS-247 [5.5]
Test Overview and Limit For the following out of band conducted spurious emissions plots at the band edge, the EUT was set to transmit at maximum power with the largest packet size available. These settings produced the worst-case emissions. The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100kHz bandwidth. Test Procedure Used ANSI C63.10-2013 Section 11.11.3 KDB 558074 D01 v05 Section 8.7.2 Test Settings 1. Start and stop frequency were set such that the band edge would be placed in the center of the plot 2. Span was set large enough so as to capture all out of band emissions near the band edge 3. RBW = 100kHz 4. VBW = 300kHz 5. Detector = Peak 6. Number of sweep points 2 x Span/RBW 7. Trace mode = max hold 8. Sweep time = auto couple 9. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None FCC ID: BCG-A1975 Figure 7-4. Test Instrument & Measurement Setup MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 67 Plot 7-25. Band Edge Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 1) Plot 7-26. Band Edge Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 67 Plot 7-27. Band Edge Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 1) Plot 7-28. Band Edge Plot (Bluetooth (HDR, iPA), 4Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 67 Plot 7-29. Band Edge Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 1) Plot 7-30. Band Edge Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 67 Plot 7-31. Band Edge Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 1) Plot 7-32. Band Edge Plot (Bluetooth (HDR, iPA), 8Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 67 Conducted Spurious Emissions 7.6 15.247(d); RSS-247 [5.5]
Test Overview and Limit For the following out of band conducted spurious emissions plots, the EUT was set to transmit at maximum power with the largest packet size available. The worst case spurious emissions were found in this configuration. The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100kHz bandwidth per the procedure in Section 11.1 of KDB 558074 D01 v05 and Section 11.11.3 of ANSI C63.10-
2013. Test Procedure Used ANSI C63.10-2013 Section 11.11.3 KDB 558074 D01 v05 Section 8.5 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to 25GHz (separated into two plots per channel) 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = Peak 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. Test Instrument & Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 67 Test Notes 1. RBW was set to 1MHz rather than 100kHz in order to increase the measurement speed. 2. The display line shown in the following plots denotes the limit at 20dB below the fundamental emission level measured in a 100kHz bandwidth. However, since the traces in the following plots are measured with a 1MHz RBW, the display line may not necessarily appear to be 20dB below the level of the fundamental in a 1MHz bandwidth. 3. For plots showing conducted spurious emissions near the limit, the frequencies were investigated with a reduced RBW to ensure that no emissions were present. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 67 Plot 7-33. Conducted Spurious Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 1) Plot 7-34. Conducted Spurious Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 39 of 67 Plot 7-35. Conducted Spurious Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 38) Plot 7-36. Conducted Spurious Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 38) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 40 of 67 Plot 7-37. Conducted Spurious Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 75) Plot 7-38. Conducted Spurious Plot (Bluetooth (HDR, ePA), 4Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 41 of 67 Plot 7-39. Conducted Spurious Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 1) Plot 7-40. Conducted Spurious Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 42 of 67 Plot 7-41. Conducted Spurious Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 38) Plot 7-42. Conducted Spurious Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 38) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 43 of 67 Plot 7-43. Conducted Spurious Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 75) Plot 7-44. Conducted Spurious Plot (Bluetooth (HDR, ePA), 8Mbps Ch. 75) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 44 of 67 Radiated Spurious Emission Measurements 7.7 15.205 15.209 15.247(d); RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at maximum power and at the appropriate frequencies. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR and Table 6 of RSS-Gen (8.10) must not exceed the limits shown in Table 7-6 per Section 15.209 and RSS-
Gen (8.9). Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-6. Radiated Limits Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Test Procedures Used ANSI C63.10-2013 Section 6.6.4.3 KDB 558074 D01 v05 Section 8.6, 8.7 Test Settings Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3kHz > 1/T 4. Averaging type was set to RMS to ensure that video filtering was applied in the power domain 5. Detector = peak 6. Sweep time = auto 7. Trace mode = max hold 8. Trace was allowed to run for at least 50 times (1/duty cycle) traces FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 45 of 67 Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW is set depending on measurement frequency, as specified in Table 7-7 below 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize Frequency 9 150kHz 0.15 30MHz 30 1000MHz
> 1000MHz RBW 200 300Hz 9 10kHz 100 120kHz 1MHz Table 7-7. RBW as a Function of Frequency Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-6. Radiated Test Setup >1GHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 46 of 67 Test Notes 1. The optional test procedures for antenna port conducted measurements of unwanted emissions per the guidance of KDB 558074 D01 v05 were not used to evaluate this device for compliance to radiated limits. All radiated spurious emissions levels were measured in a radiated test setup. 2. All emissions lying in restricted bands specified in 15.205 and Section 8.10 of RSS-Gen are below the limit shown in Table 7-6. 3. The antenna is manipulated through typical positions, polarity and length during the tests. The EUT is manipulated through three orthogonal planes. 4. This unit was tested with its standard battery. 5. The spectrum is measured from 9kHz to the 10th harmonic of the fundamental frequency of the transmitter using CISPR quasi peak detector below 1GHz. Above 1 GHz, average and peak measurements were taken using linearly polarized horn antennas. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 6. Average measurements were recorded using a VBW of 3kHz, per Section 4.1.4.2.3 of ANSI C63.10-2013, since 1/T is equal to just under 3kHz. This method was used because the EUT could not be configured to operate with a duty cycle > 98%. Both average and peak measurements were made using a peak detector. 7. Emissions below 18GHz were measured at a 3 meter test distance while emissions above 18GHz were measured at a 1 meter test distance with the application of a distance correction factor. 8. The "-" shown in the following RSE tables are used to denote a noise floor measurement. Sample Calculations Determining Spurious Emissions Levels o Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
o AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
o Margin [dB] = Field Strength Level [dBV/m] Limit [dBV/m]
Radiated Band Edge Measurement Offset o The amplitude offset shown in the radiated restricted band edge plots in Section 7.8 was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 47 of 67 Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Plot 7-45. Radiated Spurious Plot (HDR4, ePA Ch. 1, Ant. Pol. H & V) Plot 7-46. Radiated Spurious Plot (HDR4, ePA Ch. 38, Ant. Pol. H & V) Plot 7-47. Radiated Spurious Plot (HDR4, ePA Ch. 75, Ant. Pol. H & V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 48 of 67 Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Plot 7-48. Radiated Spurious Plot (HDR8, ePA Ch. 1, Ant. Pol. H & V) Plot 7-49. Radiated Spurious Plot (HDR8, ePA Ch. 38, Ant. Pol. H & V) Plot 7-50. Radiated Spurious Plot (HDR8, ePA Ch. 75, Ant. Pol. H & V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 49 of 67 Radiated Spurious Emission Measurements (Above 18GHz) 15.209 Plot 7-51. Radiated Spurious Plot above 18GHz (HDR8, ePA, Pol. H) Plot 7-52. Radiated Spurious Plot above 18GHz (HDR8, ePA, Pol. V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 50 of 67 Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Bluetooth Mode:
Power Scheme Distance of Measurements:
Operating Frequency:
Channel:
HDR4 ePA 3 Meters 2404MHz 1 Table 7-8. Radiated Measurements @ 3 meters Bluetooth Mode:
Power Scheme Distance of Measurements:
Operating Frequency:
Channel:
HDR4 ePA 3 Meters 2441MHz 38 Table 7-9. Radiated Measurements @ 3 meters FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 51 of 67 4808.00AvgH11438-80.528.7935.2753.98-18.714808.00PeakH11438-68.908.7946.8973.98-27.0912020.00AvgV---82.7320.6244.8953.98-9.0912020.00PeakV---71.1020.6256.5273.98-17.46Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Turntable Azimuth [degree]Analyzer Level [dBm]4882.00AvgH118353-80.149.0235.8853.98-18.104882.00PeakH118353-69.179.0246.8573.98-27.137323.00AvgH305347-80.1313.0839.9553.98-14.037323.00PeakH305347-69.4913.0850.5973.98-23.3912205.00AvgH---82.4720.7045.2353.98-8.7512205.00PeakH---71.1020.7056.6073.98-17.38Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Limit [dBV/m]Margin [dB]
Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Bluetooth Mode:
Power Scheme Distance of Measurements:
Operating Frequency:
Channel:
HDR4 ePA 3 Meters 2478MHz 75 Table 7-10. Radiated Measurements @ 3 meters Bluetooth Mode:
Power Scheme Distance of Measurements:
Operating Frequency:
Channel:
HDR8 ePA 3 Meters 2404MHz 1 Table 7-11. Radiated Measurements @ 3 meters FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 52 of 67 4956.00AvgH10612-79.018.9236.9153.98-17.074956.00PeakH10612-68.178.9247.7573.98-26.237434.00AvgH301348-80.8014.1440.3453.98-13.647434.00PeakH301348-70.3314.1450.8173.98-23.1712390.00AvgH---83.8021.3544.5553.98-9.4312390.00PeakH---72.7221.3555.6373.98-18.35Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Limit [dBV/m]Margin [dB]4808.00AvgH---80.918.7934.8853.98-19.104808.00PeakH---69.398.7946.4073.98-27.5812020.00AvgH---82.6720.6244.9553.98-9.0312020.00PeakH---70.7220.6256.9073.98-17.08AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Turntable Azimuth [degree]Analyzer Level [dBm]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]
Bluetooth Mode:
Power Scheme Distance of Measurements:
Operating Frequency:
Channel:
HDR8 ePA 3 Meters 2441MHz 38 Table 7-12. Radiated Measurements @ 3 meters Bluetooth Mode:
Power Scheme Distance of Measurements:
Operating Frequency:
Channel:
HDR8 ePA 3 Meters 2478MHz 75 Table 7-13. Radiated Measurements @ 3 meters FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 53 of 67 4882.00AvgH2406-80.499.0235.5353.98-18.454882.00PeakH2406-69.389.0246.6473.98-27.347323.00AvgH350341-81.3113.0838.7753.98-15.217323.00PeakH350341-70.0813.0850.0073.98-23.9812205.00AvgH---82.4620.7045.2453.98-8.7412205.00PeakH---71.4620.7056.2473.98-17.74Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Limit [dBV/m]Margin [dB]4956.00AvgH1062-79.678.9236.2553.98-17.734956.00PeakH1062-68.858.9247.0773.98-26.917434.00AvgH305347-81.5814.1439.5653.98-14.427434.00PeakH305347-70.0214.1451.1273.98-22.8612390.00AvgH---83.7521.3544.6053.98-9.3812390.00PeakH---72.2321.3556.1273.98-17.86Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Limit [dBV/m]Margin [dB]
Radiated Restricted Band Edge Measurements 7.8 15.205 15.209; RSS-Gen [8.9]
The radiated restricted band edge measurements are measured with an EMI test receiver connected to the receive antenna while the EUT is transmitting. The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Power Scheme:
HDR8 ePA Measurement Distance:
3 Meters Operating Frequency:
2404MHz Channel:
1 Plot 7-53. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 54 of 67 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Power Scheme:
HDR4 ePA Measurement Distance:
3 Meters Operating Frequency:
2404MHz Channel:
1 Plot 7-54. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 55 of 67 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Power Scheme:
HDR8 ePA Measurement Distance:
3 Meters Operating Frequency:
2478MHz Channel:
75 Plot 7-55. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 56 of 67 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Power Scheme:
HDR4 ePA Measurement Distance:
3 Meters Operating Frequency:
2478MHz Channel:
75 Plot 7-56. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 57 of 67 Radiated Spurious Emissions Measurements Below 1GHz 7.9 15.209; RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for radiated spurious emissions. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR must not exceed the limits shown in Table 7-14 per Section 15.209. Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-14. Radiated Limits Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Test Procedures Used ANSI C63.10-2013 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 120kHz (for emissions from 30MHz 1GHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 58 of 67 Test Setup The EUT and measurement equipment were set up as shown in the diagrams below. Figure 7-7. Radiated Test Setup < 30Mhz Figure 7-8. Radiated Test Setup < 1GHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 59 of 67 Test Notes 1. All emissions lying in restricted bands specified in 15.205 are below the limit shown in Table 7-14. 2. The broadband receive antenna is manipulated through vertical and horizontal polarizations during the tests. The EUT is manipulated through three orthogonal planes. 3. This unit was tested with its standard battery. 4. The spectrum is investigated using a peak detector and final measurements are recorded using CISPR quasi peak detector. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 5. Emissions were measured at a 3 meter test distance. 6. Emissions are investigated while operating on the center channel of the mode, band, and modulation that produced the worst case results during the transmitter spurious emissions testing. 7. No spurious emissions were detected within 20dB of the limit below 30MHz. 8. The results recorded using the broadband antenna is known to correlate with the results obtained by using a tuned dipole with an acceptable degree of accuracy. The VSWR for the measurement antenna was found to be less than 2:1. 9. The wide spectrum spurious emissions plots shown on the following pages are used only for the purpose of emission identification. There were no emissions detected in the 30MHz 1GHz frequency range, as shown in the subsequent plots. 10. The unit was tested with all possible mode and power schemes and only the highest emission is reported. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 60 of 67 Plot 7-57. Radiated Spurious Plot below 1GHz (HDR4, ePA, Pol. H & V, with WCP + Laptop) Table 7-15. Radiated Spurious Emissions Below 1GHz (HDR4, ePA, Pol. H & V, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 61 of 67 0 10 20 30 40 50 60 70 8030M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1V-PK+Preview Result 1H-PK+Critical_Freqs PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-638.73PeakV100357-65.50-19.4222.0840.00-17.9280.10PeakV10073-61.66-23.7521.5940.00-18.41155.66PeakV250218-61.15-24.8021.0543.52-22.47203.44PeakH100148-64.42-24.7617.8243.52-25.70273.37PeakV100163-61.32-22.6423.0446.02-22.98328.42PeakV100108-58.98-21.0826.1446.02-19.88Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
Plot 7-58. Radiated Spurious Plot below 1GHz (HDR8, ePA, Pol. H & V, with WCP + Laptop) Table 7-16. Radiated Spurious Emissions Below 1GHz (HDR8, ePA, Pol. H & V, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 62 of 67 0 10 20 30 40 50 60 70 8030M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1V-PK+Preview Result 1H-PK+Critical_Freqs PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-639.26Quasi-PeakV100107-63.43-20.0023.5740.00-16.4376.95Quasi-PeakV100138-59.40-24.0023.6040.00-16.4089.22Quasi-PeakV10058-60.21-24.0022.7943.52-20.73165.25Quasi-PeakV250159-61.60-25.0020.4043.52-23.12311.59Quasi-PeakV100151-62.59-21.0023.4146.02-22.61331.28Quasi-PeakV100115-62.70-21.0023.3046.02-22.72Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
7.10 Line-Conducted Test Data 15.207; RSS-Gen [8.8]
Test Overview and Limit All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for conducted spurious emissions. Only the conducted emissions of the configuration that produced the worst case emissions are reported in this section. All conducted emissions must not exceed the limits shown in the table below, per Section 15.207 and RSS-
Gen (8.8). Frequency of emission Conducted Limit (dBV)
(MHz) 0.15 0.5 0.5 5 5 30 Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Table 7-17. Conducted Limits
*Decreases with the logarithm of the frequency. Test Procedures Used ANSI C63.10-2013, Section 6.2 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = RMS 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 63 of 67 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-9. Test Instrument & Measurement Setup Test Notes 1. 2. 3. 4. All modes of operation were investigated and the worst-case emissions are reported using mid channel. The emissions found were not affected by the choice of channel used during testing. The limit for an intentional radiator from 150kHz to 30MHz are specified in Part 15.207 and RSS-Gen (8.8). Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB) QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB) 5. Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV) 6. 7. Traces shown in plot are made using a peak detector. Deviations to the Specifications: None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 64 of 67 Plot 7-59. Line Conducted Plot with Bluetooth HDR (L1, with WCP + Laptop) Table 7-18. Line Conducted Data with Bluetooth HDR (L1, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 65 of 67 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV Plot 7-60. Line Conducted Plot with Bluetooth HDR (N, with WCP + Laptop) Table 7-19. Line Conducted Data with Bluetooth HDR (N, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 66 of 67 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV 8.0 C O N C L U S I O N data relate collected The the Apple Watch FCC ID: BCG-A1975 is in compliance with Part 15 Subpart C (15.247) of the FCC Rules and RSS-247 of the Innovation, Science and Economic Development Canada Rules. item(s) tested show only and that the FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-06.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 67 of 67
1 2 3 4 | Bluetooth LE Test Report | Test Report | 3.24 MiB | November 09 2018 / December 09 2018 |
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 Bluetooth (Low Energy) Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
IC:
APPLICANT:
Application Type:
Model/HVIN:
EUT Type:
Max. RF Output Power:
Frequency Range:
FCC Classification:
FCC Rule Part(s):
ISED Specification:
Test Procedure(s):
Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-07.BCG BCG-A1975 579C-A1975 Apple Inc. Certification A1975 Watch 67.298 mW (18.28 dBm) Peak Conducted 2402 2480MHz Digital Transmission System (DTS) Part 15 Subpart C (15.247) RSS-247 Issue 2 ANSI C63.10-2013, KDB 558074 D01 v05, KDB 648474 D03 v01r04 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013 and KDB 558074 D01 v05. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 62 T A B L E O F C O N T E N T S 1.0 INTRODUCTION .......................................................................................................................................... 3 1.1 Scope ................................................................................................................................................................... 3 1.2 PCTEST Test Location ......................................................................................................................................... 3 1.3 Test Facility / Accreditations ................................................................................................................................. 3 2.0 PRODUCT INFORMATION .......................................................................................................................... 4 2.1 Equipment Description ......................................................................................................................................... 4 2.2 Device Capabilities ............................................................................................................................................... 4 2.3 Antenna Description ............................................................................................................................................. 5 2.4 Test Support Equipment ....................................................................................................................................... 5 2.5 Test Configuration ................................................................................................................................................ 5 2.6 Software and Firmware ........................................................................................................................................ 6 2.7 EMI Suppression Device(s)/Modifications ............................................................................................................ 6 3.0 DESCRIPTION OF TESTS .......................................................................................................................... 7 3.1 Evaluation Procedure ........................................................................................................................................... 7 3.2 AC Line Conducted Emissions ............................................................................................................................. 7 3.3 Radiated Emissions .............................................................................................................................................. 8 3.4 Environmental Conditions ..................................................................................................................................... 8 ANTENNA REQUIREMENTS ...................................................................................................................... 9 MEASUREMENT UNCERTAINTY ............................................................................................................. 10 TEST EQUIPMENT CALIBRATION DATA ................................................................................................ 11 TEST RESULTS ......................................................................................................................................... 12 7.1 Summary ............................................................................................................................................................ 12 7.2 6dB Bandwidth Measurement Bluetooth (LE) .................................................................................................. 13 7.3 Output Power Measurement Bluetooth (LE) .................................................................................................... 21 7.3.1 Peak Output Power Measurement - Bluetooth (LE)........................................................................................ 22 7.3.2 Average Output Power Measurement - Bluetooth (LE) .................................................................................. 23 7.4 Power Spectral Density Bluetooth (LE) ........................................................................................................... 24 7.5 Conducted Emissions at the Band Edge ............................................................................................................ 32 7.6 Conducted Spurious Emissions .......................................................................................................................... 35 7.7 Radiated Spurious Emission Measurements ...................................................................................................... 43 7.8 Radiated Restricted Band Edge Measurements ................................................................................................. 50 7.9 Radiated Spurious Emissions Measurements Below 1GHz ............................................................................ 54 7.10 Line-Conducted Test Data .............................................................................................................................. 58 CONCLUSION ............................................................................................................................................ 62 4.0 5.0 6.0 7.0 8.0 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 62 1.0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01. 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 62 2.0 P R O D U C T I N F O R M A T I O N 2.1 Equipment Description The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The data found in this test report was taken with the EUT operating in Bluetooth low energy mode. While in low energy mode, the Bluetooth transmitter hops pseudo-randomly between 40 channels, three of which are advertising channels. When the transmitter is hopping only between the three advertising channels, the EUT does not fall under the category of a hopper as defined in 15.247(a)(iii) which states that a frequency hopping systems in the 24002483.5 MHz band shall use at least 15 channels. As operation on only the advertising channels does not qualify the EUT as a hopper, the EUT is certified as a DTS device in this mode. The data found in this report is representative of the device when it transmits on its advertising channels. Typical Bluetooth operation is covered under the DSS report found with this application. Test Device Serial No.: C89WP003K473, D92WW00XKK89 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC Device Capabilities Ch. 0
:
19
:
39 Frequency (MHz) 2402
:
2440
:
2480 Table 2-1. Frequency / Channel Operations This device supports Bluetooth LE operations with 1Mbps and 2Mbps. Table 2-2. Measured Duty Cycles FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 62 Duty Cycle (%)ePA100.0iPA100.0ePA100.0iPA100.02MMaximum Achievable Duty CyclesBLE Mode1M Antenna Description 2.3 Following antenna was used for the testing. Frequency [GHz]
2.4 Antenna Gain
(dBi)
-12.2 Table 2-3. Antenna Peak Gain Note: This device is capable of operating in hopping and non-hopping mode. The EUT can hop between 79 different channels in the 2400 2483.5MHz band. 2.4 Test Support Equipment Table 2-4. Test Support Equipment Used Test Configuration 2.5 The EUT was tested per the guidance of ANSI C63.10-2013 and KDB 558074 D01 v05. ANSI C63.10-2013 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. See Sections 3.2 for AC line conducted emissions test setups, 3.3 for radiated emissions test setups, and 7.2, 7.3, 7.3.1, 7.5, and 7.6 for antenna port conducted emissions test setups. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel, and various types of wristbands, metal and non-metal wristbands The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. For AC line conducted and radiated test below 1GHz, following configuration were investigated and worst case was reported.
- EUT powered by AC/DC adaptor via USB cable with wire charger
- EUT powered by host PC via USB cable with wire charger MEASUREMENT REPORT FCC ID: BCG-A1975
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 62 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A Software and Firmware 2.6 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.7 EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and/or no modifications were made during testing. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 62 3.0 D E S C R I P T I O N O F T E S T S Evaluation Procedure AC Line Conducted Emissions 3.1 The measurement procedures described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) and the guidance provided in KDB 558074 D01 v05 were used in the measurement of the EUT. Deviation from measurement procedure.....................................None 3.2 The line-conducted facility is located inside a 7m x 3.66m x 2.7m shielded enclosure. The shielded enclosure is manufactured by AP Americas. The shielding effectiveness of the shielded room is in accordance with MIL-Std-
285 or NSA 65-6. A 1m x 1.5m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H Line-Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. The external power line filter is EPCOS 2X60A Power Line Filter (100dB Attenuation, 14kHz-18GHz) and the two EPCOs 2X48A filters (100dB Minimum Insertion Loss, 14kHz 10GHz). These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference groundplane. Power cables for support equipment were routed down to the second LISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions is used for final measurements on the same test site. The analyzer is set to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final measurements. Line conducted emissions test results are shown in Section 7.10. Automated test software was used to perform the AC line conducted emissions testing. Automated measurement software utilized is Rohde & Schwarz EMC32, Version 10.20.01. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 62 Radiated Emissions 3.3 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. An 80cm tall test table made of Styrodur is placed on top of the turn table. For measurements above 1GHz, an additional Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33 depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. 3.4 The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar). Environmental Conditions FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 62 4.0 A N T E N N A R E Q U I R E M E N T S Excerpt from 15.203 of the FCC Rules/Regulations:
An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The antenna(s) of the EUT are permanently attached. There are no provisions for connection to an external antenna. Conclusion:
The EUT complies with the requirement of 15.203. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 62 5.0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Line Conducted Disturbance Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 3.09 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 62 6.0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 6-1. Annual Test Equipment Calibration Schedule Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 62 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number AnritsuML2495APower Meter11/28/2017Annual11/28/20181039008AnritsuMA2411BPower Sensor 10MHz-40GHz11/28/2017Annual11/28/20181027293COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063Rohde & Schwarz HFH2-Z2 Loop Antenna 3/13/2018Annual 3/13/2019100519 7.0 T E S T R E S U L T S Summary 7.1 Company Name:
Apple Inc. FCC ID:
BCG-A1975 FCC Classification:
Digital Transmission System (DTS) Number of Channels:
40 FCC Part Section(s) RSS Section(s) Test Description Test Limit Test Test Condition Result Reference 15.247(a)(2) RSS-247 [5.2]
6dB Bandwidth
> 500kHz PASS Section 7.2 15.247(b)(3) RSS-247 [5.4(4)]
Transmitter Output Power 1 Watt PASS Sections 7.3 15.247(e) RSS-247 [5.2]
Transmitter Power Spectral Density 8dBm / 3kHz Band PASS Section 7.3.1 CONDUCTED 15.247(d) RSS-247 [5.5]
Band Edge /
Out-of-Band Emissions 20dBc PASS Sections 7.5, 7.6 15.205 15.209 RSS-Gen [8.9]
General Field Strength Limits (Restricted Bands and Radiated Emission Limits) Emissions in restricted bands must meet the radiated limits detailed in 15.209 (RSS-Gen [8.9]) RADIATED PASS Sections 7.7, 7.8 15.207 RSS-Gen [8.8]
AC Conducted Emissions 150kHz 30MHz
< FCC 15.207 limits
(RSS-Gen[8.8]) LINE CONDUCTED PASS Section 7.10 Table 7-1. Summary of Test Results Notes:
1. All modes of operation were investigated. The test results shown in the following sections represent the worst case emissions. 2. The analyzer plots shown in this section were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables and attenuators used as part of the system to connect the EUT to the analyzer at all frequencies of interest. 3. All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables and attenuators. 4. For conducted spurious emissions, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST Bluetooth LE Automation, Version 3.3. 5. For radiated band edge, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST Chamber Automation, Version 0.2.15. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 62 6dB Bandwidth Measurement Bluetooth (LE) 7.2 15.247(a.2); RSS-247 [5.2]
Test Overview and Limit The bandwidth at 6dB down from the highest in-band spectral density is measured with a spectrum analyzer connected to the transmitter antenna terminal of the EUT while the EUT is operating at maximum power and at the appropriate frequencies. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible 6dB bandwidth is 500 kHz. Test Procedure Used ANSI C63.10-2013 Section 11.8.2 Option 2 KDB 558074 D01 v05 Section 8.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability of the spectrum analyzer was used to perform the 6dB bandwidth measurement. The X dB bandwidth parameter was set to X = 6. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. RBW = 100kHz 3. VBW 3 x RBW 4. Detector = Peak 5. Trace mode = max hold 6. Sweep = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None FCC ID: BCG-A1975 Figure 7-1. Test Instrument & Measurement Setup MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 62 Table 7-2. Conducted Bandwidth Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 62 24021.0ePA0LE712.3500Pass24401.0ePA19LE713.1500Pass24801.0ePA39LE722.1500Pass24022.0ePA0LE1387.0500Pass24402.0ePA19LE1387.0500Pass24802.0ePA39LE1384.0500Pass24021.0iPA0LE711.9500Pass24401.0iPA19LE708.5500Pass24801.0iPA39LE719.4500Pass24022.0iPA0LE1383.0500Pass24402.0iPA19LE1385.0500Pass24802.0iPA39LE1380.0500PassPower SchemeChannel No.Bluetooth ModeMeasured Bandwidth [kHz]Minimum Bandwidth [kHz]Pass / FailFrequency [MHz]Data Rate [Mbps]
Plot 7-1. 6dB Bandwidth Plot (Bluetooth (LE), 1Mbps, ePA Ch. 0) Plot 7-2. 6dB Bandwidth Plot (Bluetooth (LE), 1Mbps, ePA Ch. 19) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 62 Plot 7-3. 6dB Bandwidth Plot (Bluetooth (LE), 1Mbps, ePA Ch. 39) Plot 7-4. 6dB Bandwidth Plot (Bluetooth (LE), 2Mbps, ePA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 62 Plot 7-5. 6dB Bandwidth Plot (Bluetooth (LE), 2Mbps, ePA Ch. 19) Plot 7-6. 6dB Bandwidth Plot (Bluetooth (LE), 2Mbps, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 62 Plot 7-7. 6dB Bandwidth Plot (Bluetooth (LE), 1Mbps, iPA Ch. 0) Plot 7-8. 6dB Bandwidth Plot (Bluetooth (LE), 1Mbps, iPA Ch. 19) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 62 Plot 7-9. 6dB Bandwidth Plot (Bluetooth (LE), 1Mbps, iPA Ch. 39) Plot 7-10. 6dB Bandwidth Plot (Bluetooth (LE), 2Mbps, iPA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 62 Plot 7-11. 6dB Bandwidth Plot (Bluetooth (LE), 2Mbps, iPA Ch. 19) Plot 7-12. 6dB Bandwidth Plot (Bluetooth (LE), 2Mbps, iPA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 62 7.3 Output Power Measurement Bluetooth (LE) 15.247(b.3); RSS-247 [5.4(4)]
Test Overview and Limits The transmitter antenna terminal of the EUT is connected to the input of a spectrum analyzer. Measurements are made while the EUT is operating at maximum power and at the appropriate frequencies. The maximum permissible conducted output power is 1 Watt. Test Procedure Used ANSI C63.10-2013 Section 11.9.1.3 ANSI C63.10-2013 Section 11.9.2.3.2 KDB 558074 D01 v05 Section 8.3.1.3 Test Settings Method PKPM1 (Peak Power Measurement) The maximum peak conducted output power may be measured using a broadband peak RF power meter. The power meter shall have a video bandwidth that is greater than or equal to the DTS bandwidth and shall utilize a fast-responding diode detector. Method AVGPM-G (Average Power Measurement) Average power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The power meter implemented triggering and gating capabilities which were set up such that power measurements were recorded only during the ON time of the transmitter. The trace was averaged over 100 traces to obtain the final measured average power. Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-2. Test Instrument & Measurement Setup for Peak and Average Power Measurement Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 62 7.3.1 15.247(b.3), RSS-247 [5.4(d)]
Peak Output Power Measurement - Bluetooth (LE) Table 7-3. Peak Conducted Output Power Measurements (Bluetooth (LE) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 62
[dBm][mW]24021.0ePA0LE17.4054.95424401.0ePA19LE18.1064.56524801.0ePA39LE16.6245.92024021.0iPA0LE12.8219.14324401.0iPA19LE13.0820.32424801.0iPA39LE12.0916.18124022.0ePA0LE17.4655.71924402.0ePA19LE18.1865.76624802.0ePA39LE16.6446.13224022.0iPA0LE12.8619.32024402.0iPA19LE13.1020.41724802.0iPA39LE12.1216.293Frequency [MHz]Power SchemeChannel No.Bluetooth ModePeak Conducted PowerData Rate [Mbps]
7.3.2 15.247(b.3), RSS-247 [5.4(d)]
Average Output Power Measurement - Bluetooth (LE) Table 7-4. Average Conducted Output Power Measurements (Bluetooth (LE) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 62
[dBm][mW]24021.0ePA0LE17.3354.07524401.0ePA19LE18.0063.09624801.0ePA39LE16.5445.08224021.0iPA0LE12.7518.83624401.0iPA19LE13.0019.95324801.0iPA39LE12.0115.88524022.0ePA0LE17.3454.20024402.0ePA19LE18.0063.09624802.0ePA39LE16.5344.97824022.0iPA0LE12.7518.83624402.0iPA19LE13.0019.95324802.0iPA39LE12.0115.885Frequency [MHz]Power SchemeChannel No.Bluetooth ModeAverage Conducted PowerData Rate [Mbps]
Power Spectral Density Bluetooth (LE) 7.4 15.247(e); RSS-247 [5.2]
Test Overview and Limit The peak power density is measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at maximum power and at the appropriate frequencies. The maximum permissible power spectral density is 8 dBm in any 3 kHz band. Test Procedure Used ANSI C63.10-2013 Section 11.10.2 Method PKPSD KDB 558074 D01 v05 Section 8.4 Test Settings 1. Analyzer was set to the center frequency of the DTS channel under investigation 2. Span = 1.5 times the DTS channel bandwidth 3. RBW = 3kHz 4. VBW = 1MHz 5. Detector = peak 6. Sweep time = auto couple 7. Trace mode = max hold 8. Trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-3. Test Instrument & Measurement Setup Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 62 Table 7-5. Conducted Power Density Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 62 24021.0ePA0LE-0.058.0-8.0524401.0ePA19LE0.788.0-7.2224801.0ePA39LE-1.348.0-9.3424021.0iPA0LE-4.758.0-12.7524401.0iPA19LE-3.908.0-11.9024801.0iPA39LE-5.668.0-13.6624022.0ePA0LE-5.498.0-13.4924402.0ePA19LE-4.738.0-12.7324802.0ePA39LE-6.878.0-14.8724022.0iPA0LE-10.238.0-18.2324402.0iPA19LE-9.418.0-17.4124802.0iPA39LE-11.148.0-19.14Power SchemeFrequency [MHz]Channel No.Bluetooth ModeMeasured Power Spectral Density [dBm]Maximum Permissible Power Density [dBm / 3kHz]Margin [dB]Data Rate [Mbps]
Plot 7-13. Power Spectral Density Plot (Bluetooth (LE), 1Mbps, ePA Ch. 0) Plot 7-14. Power Spectral Density Plot (Bluetooth (LE), 1Mbps, ePA Ch. 19) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 62 Plot 7-15. Power Spectral Density Plot (Bluetooth (LE), 1Mbps, ePA Ch. 39) Plot 7-16. Power Spectral Density Plot (Bluetooth (LE), 1Mbps, iPA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 62 Plot 7-17. Power Spectral Density Plot (Bluetooth (LE), 1Mbps, iPA Ch. 19) Plot 7-18. Power Spectral Density Plot (Bluetooth (LE), 1Mbps, iPA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 62 Plot 7-19. Power Spectral Density Plot (Bluetooth (LE), 2Mbps, ePA Ch. 0) Plot 7-20. Power Spectral Density Plot (Bluetooth (LE), 2Mbps, ePA Ch. 19) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 62 Plot 7-21. Power Spectral Density Plot (Bluetooth (LE), 2Mbps, ePA Ch. 39) Plot 7-22. Power Spectral Density Plot (Bluetooth (LE), 2Mbps, iPA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 62 Plot 7-23. Power Spectral Density Plot (Bluetooth (LE), 2Mbps, iPA Ch. 19) Plot 7-24. Power Spectral Density Plot (Bluetooth (LE), 2Mbps, iPA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 62 Conducted Emissions at the Band Edge 7.5 15.247(d); RSS-247 [5.5]
Test Overview and Limit For the following out of band conducted spurious emissions plots at the band edge, the EUT was set to transmit at maximum power with the largest packet size available. These settings produced the worst-case emissions. The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100kHz bandwidth. Test Procedure Used ANSI C63.10-2013 Section 11.11.3 KDB 558074 D01 v05 Section 8.7.2 Test Settings 1. Start and stop frequency were set such that the band edge would be placed in the center of the plot 2. Span was set large enough so as to capture all out of band emissions near the band edge 3. RBW = 100kHz 4. VBW = 300kHz 5. Detector = Peak 6. Number of sweep points 2 x Span/RBW 7. Trace mode = max hold 8. Sweep time = auto couple 9. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None FCC ID: BCG-A1975 Figure 7-4. Test Instrument & Measurement Setup MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 62 Plot 7-25. Band Edge Plot (Bluetooth (LE), 1Mbps, ePA Ch. 0) Plot 7-26. Band Edge Plot (Bluetooth (LE), 1Mbps, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 62 Plot 7-27. Band Edge Plot (Bluetooth (LE), 2Mbps, ePA Ch. 0) Plot 7-28. Band Edge Plot (Bluetooth (LE), 2Mbps, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 62 Conducted Spurious Emissions 7.6 15.247(d); RSS-247 [5.5]
Test Overview and Limit For the following out of band conducted spurious emissions plots, the EUT was set to transmit at maximum power with the largest packet size available. The worst case spurious emissions were found in this configuration. The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100kHz bandwidth per the procedure in Section 11.1 of KDB 558074 D01 v05 and Section 11.11.3 of ANSI C63.10-
2013. Test Procedure Used ANSI C63.10-2013 Section 11.11.3 KDB 558074 D01 v05 Section 8.5 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to 25GHz (separated into two plots per channel) 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = Peak 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. Test Instrument & Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 62 Test Notes 1. RBW was set to 1MHz rather than 100kHz in order to increase the measurement speed. 2. The display line shown in the following plots denotes the limit at 20dB below the fundamental emission level measured in a 100kHz bandwidth. However, since the traces in the following plots are measured with a 1MHz RBW, the display line may not necessarily appear to be 20dB below the level of the fundamental in a 1MHz bandwidth. 3. For plots showing conducted spurious emissions near the limit, the frequencies were investigated with a reduced RBW to ensure that no emissions were present. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 62 Plot 7-29. Conducted Spurious Plot (Bluetooth (LE), 1Mbps, ePA Ch. 0) Plot 7-30. Conducted Spurious Plot (Bluetooth (LE), 1Mbps, ePA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 62 Plot 7-31. Conducted Spurious Plot (Bluetooth (LE), 1Mbps, ePA Ch. 19) Plot 7-32. Conducted Spurious Plot (Bluetooth (LE), 1Mbps, ePA Ch. 19) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 62 Plot 7-33. Conducted Spurious Plot (Bluetooth (LE), 1Mbps, ePA Ch. 39) Plot 7-34. Conducted Spurious Plot (Bluetooth (LE), 1Mbps, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 39 of 62 Plot 7-35. Conducted Spurious Plot (Bluetooth (LE), 2Mbps, ePA Ch. 0) Plot 7-36. Conducted Spurious Plot (Bluetooth (LE), 2Mbps, ePA Ch. 0) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 40 of 62 Plot 7-37. Conducted Spurious Plot (Bluetooth (LE), 2Mbps, ePA Ch. 19) Plot 7-38. Conducted Spurious Plot (Bluetooth (LE), 2Mbps, ePA Ch. 19) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 41 of 62 Plot 7-39. Conducted Spurious Plot (Bluetooth (LE), 2Mbps, ePA Ch. 39) Plot 7-40. Conducted Spurious Plot (Bluetooth (LE), 2Mbps, ePA Ch. 39) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 42 of 62 Radiated Spurious Emission Measurements 7.7 15.205 15.209 15.247(d); RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at maximum power and at the appropriate frequencies. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR and Table 6 of RSS-Gen (8.10) must not exceed the limits shown in Table 7-6 per Section 15.209 and RSS-
Gen (8.9). Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-6. Radiated Limits Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Test Procedures Used ANSI C63.10-2013 Section 6.6.4.3 KDB 558074 D01 v05 Section 8.6, 8.7 Test Settings Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3kHz > 1/T 4. Averaging type was set to RMS to ensure that video filtering was applied in the power domain 5. Detector = peak 6. Sweep time = auto 7. Trace mode = max hold 8. Trace was allowed to run for at least 50 times (1/duty cycle) traces FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 43 of 62 Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW is set depending on measurement frequency, as specified in Table 7-7 below 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize Frequency 9 150kHz 0.15 30MHz 30 1000MHz
> 1000MHz RBW 200 300Hz 9 10kHz 100 120kHz 1MHz Table 7-7. RBW as a Function of Frequency Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-6. Radiated Test Setup >1GHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 44 of 62 Test Notes 1. The optional test procedures for antenna port conducted measurements of unwanted emissions per the guidance of KDB 558074 D01 v05 were not used to evaluate this device for compliance to radiated limits. All radiated spurious emissions levels were measured in a radiated test setup. 2. All emissions lying in restricted bands specified in 15.205 and Section 8.10 of RSS-Gen are below the limit shown in Table 7-6. 3. The antenna is manipulated through typical positions, polarity and length during the tests. The EUT is manipulated through three orthogonal planes. 4. This unit was tested with its standard battery. 5. The spectrum is measured from 9kHz to the 10th harmonic of the fundamental frequency of the transmitter using CISPR quasi peak detector below 1GHz. Above 1 GHz, average and peak measurements were taken using linearly polarized horn antennas. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 6. Average measurements were recorded using a VBW of 3kHz, per Section 4.1.4.2.3 of ANSI C63.10-
2013, since 1/T is equal to just under 3kHz. This method was used because the EUT could not be configured to operate with a duty cycle > 98%. Both average and peak measurements were made using a peak detector. 7. Emissions below 18GHz were measured at a 3 meter test distance while emissions above 18GHz were measured at a 1 meter test distance with the application of a distance correction factor. 8. The "-" shown in the following RSE tables are used to denote a noise floor measurement. Sample Calculations Determining Spurious Emissions Levels o Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
o AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
o Margin [dB] = Field Strength Level [dBV/m] Limit [dBV/m]
Radiated Band Edge Measurement Offset o The amplitude offset shown in the radiated restricted band edge plots in Section 7.8 was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 45 of 62 Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Plot 7-41. Radiated Spurious Plot Above 1GHz (1Mbps, ePA Ch. 0, Ant. Pol. H & V) Plot 7-42. Radiated Spurious Plot Above 1GHz (1Mbps, ePA Ch. 19, Ant. Pol. H & V) Plot 7-43. Radiated Spurious Plot Above 1GHz (1Mbps, ePA Ch. 39, Ant. Pol. H & V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 46 of 62 Radiated Spurious Emission Measurements (Above 18GHz) 15.209 Plot 7-44. Radiated Spurious Plot Above 18GHz (1Mbps, ePA, Ant. Pol. H) Plot 7-45. Radiated Spurious Plot Above 18GHz (1Mbps, ePA, Ant. Pol. V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 47 of 62 Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Bluetooth Mode:
Distance of Measurements:
Operating Frequency:
Channel:
LE 3 Meters 2402MHz 0 Table 7-8. Radiated Measurements @ 3 meters Bluetooth Mode:
Distance of Measurements:
Operating Frequency:
Channel:
LE 3 Meters 2440MHz 19 Table 7-9. Radiated Measurements @ 3 meters FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 48 of 62 4804.00AvgH133370-77.188.7638.5853.98-15.404804.00PeakH133370-67.918.7647.8573.98-26.1312010.00AvgH - --82.8420.6244.7853.98-9.2012010.00PeakH - --72.0320.6255.5973.98-18.39Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Ant. Pol. [H/V]Limit [dBV/m]Margin [dB]Antenna Height [cm]Turntable Azimuth [degree]Frequency [MHz]Detector4880.00AvgH100360-75.658.9740.3253.98-13.664880.00PeakH100360-67.708.9748.2773.98-25.717320.00AvgH100360-78.2113.0941.8853.98-12.107320.00PeakH100360-69.3413.0950.7573.98-23.2312200.00AvgH - --82.6520.6745.0253.98-8.9612200.00PeakH - --71.1920.6756.4873.98-17.50Antenna Height [cm]Turntable Azimuth [degree]Frequency [MHz]Analyzer Level [dBm]DetectorAnt. Pol. [H/V]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]
Radiated Spurious Emission Measurements 15.205 15.209 15.247(d); RSS-Gen [8.9]
Bluetooth Mode:
Distance of Measurements:
Operating Frequency:
Channel:
LE 3 Meters 2480MHz 39 Table 7-10. Radiated Measurements @ 3 meters FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 49 of 62 4960.00AvgH355150-78.338.9237.5953.98-16.394960.00PeakH355150-68.518.9247.4173.98-26.577440.00AvgH300130-79.1714.1842.0153.98-11.967440.00PeakH300130-70.4314.1850.7573.98-23.2212400.00AvgH - --83.8821.4244.5453.98-9.4412400.00PeakH - --73.1121.4255.3173.98-18.67Frequency [MHz]Analyzer Level [dBm]DetectorAnt. Pol. [H/V]Antenna Height [cm]Limit [dBV/m]Margin [dB]Turntable Azimuth [degree]Field Strength [dBV/m]AFCL [dB/m]
Radiated Restricted Band Edge Measurements 7.8 15.205 15.209; RSS-Gen [8.9]
The radiated restricted band edge measurements are measured with an EMI test receiver connected to the receive antenna while the EUT is transmitting. The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Data Rate:
Power Scheme:
LE 1Mbps ePA Measurement Distance:
3 Meters Operating Frequency:
2402MHz Channel:
0 Plot 7-46. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 50 of 62 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Data Rate:
Power Scheme:
LE 1Mbps iPA Measurement Distance:
3 Meters Operating Frequency:
2402MHz Channel:
0 Plot 7-47. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 51 of 62 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Data Rate:
Power Scheme:
LE 1Mbps ePA Measurement Distance:
3 Meters Operating Frequency:
2480MHz Channel:
39 Plot 7-48. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 52 of 62 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain Bluetooth Mode:
Data Rate:
Power Scheme:
LE 1Mbps iPA Measurement Distance:
3 Meters Operating Frequency:
2480MHz Channel:
39 Plot 7-49. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 53 of 62 Radiated Spurious Emissions Measurements Below 1GHz 7.9 15.209; RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for radiated spurious emissions. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR must not exceed the limits shown in Table 7-11 per Section 15.209. Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-11. Radiated Limits Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Test Procedures Used ANSI C63.10-2013 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 120kHz (for emissions from 30MHz 1GHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 54 of 62 Test Setup The EUT and measurement equipment were set up as shown in the diagrams below. Figure 7-7. Radiated Test Setup < 30Mhz Figure 7-8. Radiated Test Setup < 1GHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 55 of 62 Test Notes 1. All emissions lying in restricted bands specified in 15.205 are below the limit shown in Table 7-11. 2. The broadband receive antenna is manipulated through vertical and horizontal polarizations during the tests. The EUT is manipulated through three orthogonal planes. 3. This unit was tested with its standard battery. 4. The spectrum is investigated using a peak detector and final measurements are recorded using CISPR quasi peak detector. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 5. Emissions were measured at a 3 meter test distance. 6. Emissions are investigated while operating on the center channel of the mode, band, and modulation that produced the worst case results during the transmitter spurious emissions testing. 7. No spurious emissions were detected within 20dB of the limit below 30MHz. 8. The results recorded using the broadband antenna is known to correlate with the results obtained by using a tuned dipole with an acceptable degree of accuracy. The VSWR for the measurement antenna was found to be less than 2:1. 9. The wide spectrum spurious emissions plots shown on the following pages are used only for the purpose of emission identification. There were no emissions detected in the 30MHz 1GHz frequency range, as shown in the subsequent plots. 10. The unit was tested with all possible mode and power schemes and only the highest emission is reported. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 56 of 62 Plot 7-50. Radiated Spurious Plot below 1GHz (1Mbps ePA, Pol. H & V, with WCP + Adapter) Table 7-12. Radiated Spurious Emissions Below 1GHz (1Mbps ePA, Pol. H & V, with WCP + Adapter) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 57 of 62 0 10 20 30 40 50 60 70 8030M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1V-PK+Preview Result 1H-PK+Critical_Freqs PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-630.49PeakV250124-62.28-14.9825.3840.00-14.6237.52PeakV100293-60.75-18.7322.6340.00-17.3788.05PeakV10048-61.54-23.6321.8143.52-21.71157.85PeakV250142-63.16-24.8620.3043.52-23.22317.17PeakV100125-62.80-21.3723.6746.02-22.35816.14PeakV250156-67.34-12.0320.0546.02-25.97Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
7.10 Line-Conducted Test Data 15.207; RSS-Gen [8.8]
Test Overview and Limit All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for conducted spurious emissions. Only the conducted emissions of the configuration that produced the worst case emissions are reported in this section. All conducted emissions must not exceed the limits shown in the table below, per Section 15.207 and RSS-Gen (8.8). Frequency of emission Conducted Limit (dBV)
(MHz) 0.15 0.5 0.5 5 5 30 Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Table 7-13. Conducted Limits
*Decreases with the logarithm of the frequency. Test Procedures Used ANSI C63.10-2013, Section 6.2 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = RMS 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 58 of 62 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-9. Test Instrument & Measurement Setup Test Notes 1. 2. 3. 4. All modes of operation were investigated and the worst-case emissions are reported using mid channel. The emissions found were not affected by the choice of channel used during testing. The limit for an intentional radiator from 150kHz to 30MHz are specified in Part 15.207 and RSS-Gen (8.8). Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB) QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB) 5. Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV) 6. 7. Traces shown in plot are made using a peak detector. Deviations to the Specifications: None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 59 of 62 Plot 7-51. Line Conducted Plot with Bluetooth LE (L1, with WCP + Laptop) Table 7-14. Line Conducted Data with Bluetooth LE (L1, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 60 of 62 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV Plot 7-52. Line Conducted Plot with Bluetooth LE (N, with WCP + Laptop)) Table 7-15. Line Conducted Data with Bluetooth LE (N, with WCP + Laptop) ) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 61 of 62 0 50 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV 8.0 C O N C L U S I O N data relate collected The the Apple Watch FCC ID: BCG-A1975 is in compliance with Part 15 Subpart C (15.247) of the FCC Rules and RSS-247 of the Innovation, Science and Economic Development Canada Rules. item(s) tested show only and that the FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-07.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 62 of 62
1 2 3 4 | WLAN Test Report | Test Report | 3.38 MiB | November 09 2018 / December 09 2018 |
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.247 / ISED RSS-247 WLAN 802.11b/g/n Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-05.BCG BCG-A1975 579C-A1975 Apple Inc. Certification A1975 Watch 2412 2472MHz Digital Transmission System (DTS) Part 15 Subpart C (15.247) RSS-247 Issue 2 ANSI C63.10-2013, KDB 558074 D01 v05, KDB 662911 D01 v02r01, KDB 648474 D03 v01r04 Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
IC:
APPLICANT:
Application Type:
Model/HVIN:
EUT Type:
Frequency Range:
FCC Classification:
FCC Rule Part(s):
ISED Specification:
Test Procedure(s):
This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013 and KDB 558074 D01 v05. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 61 V 8.1 05/10/2018 T A B L E O F C O N T E N T S 1.0 INTRODUCTION .............................................................................................................................................. 4 1.1 1.2 1.3 Scope ................................................................................................................................................................... 4 PCTEST Test Location ......................................................................................................................................... 4 Test Facility / Accreditations ................................................................................................................................. 4 2.0 PRODUCT INFORMATION ............................................................................................................................. 5 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Equipment Description ......................................................................................................................................... 5 Device Capabilities ............................................................................................................................................... 5 Antenna Description ............................................................................................................................................. 5 Test Support Equipment ....................................................................................................................................... 6 Test Configuration ................................................................................................................................................ 6 Software and Firmware ........................................................................................................................................ 6 EMI Suppression Device(s)/Modifications ............................................................................................................ 6 3.0 DESCRIPTION OF TESTS .............................................................................................................................. 7 3.1 3.2 3.3 3.4 Evaluation Procedure ........................................................................................................................................... 7 AC Line Conducted Emissions ............................................................................................................................. 7 Radiated Emissions .............................................................................................................................................. 8 Environmental Conditions ..................................................................................................................................... 8 4.0 ANTENNA REQUIREMENTS .......................................................................................................................... 9 5.0 MEASUREMENT UNCERTAINTY ................................................................................................................. 10 6.0 7.0 TEST EQUIPMENT CALIBRATION DATA .................................................................................................... 11 TEST RESULTS ............................................................................................................................................. 12 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 Summary ............................................................................................................................................................ 12 6dB Bandwidth Measurement ............................................................................................................................ 13 Output Power Measurement ............................................................................................................................... 19 Power Spectral Density ...................................................................................................................................... 22 Conducted Emissions at the Band Edge ............................................................................................................ 28 Conducted Spurious Emissions .......................................................................................................................... 32 Radiated Spurious Emission Measurements Above 1 GHz ............................................................................. 37 7.7.1 Radiated Spurious Emission Measurements ................................................................................................................. 40 7.7.2 Radiated Restricted Band Edge Measurements ............................................................................................................ 44 Radiated Spurious Emissions Measurements Below 1GHz ............................................................................ 53 Line-Conducted Test Data .................................................................................................................................. 57 8.0 CONCLUSION ............................................................................................................................................... 61 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 61 V 8.1 05/10/2018 MEASUREMENT REPORT EUT Overview FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 61 V 8.1 05/10/2018 802.11b2412 - 247279.43319.00136.45821.35802.11g2412 - 247270.79518.50201.37223.04802.11n2412 - 247270.46918.48200.44723.02ModeTx Frequency (MHz)Max. Power (mW)Max. Power (mW)Max. Power (dBm)Max. Power (dBm)Peak ConductedAvg Conducted 1.0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01. 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 61 V 8.1 05/10/2018 2.0 P R O D U C T I N F O R M A T I O N 2.1 Equipment Description Device Capabilities The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The test data contained in this report pertains only to the emissions due to the EUTs WLAN (DTS) transmitter. Test Device Serial No.: C89WP003K473, D92WW00XKK89#REF!
2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC Note: The maximum achievable duty cycles for all modes were determined based on measurements performed on a spectrum analyzer in zero-span mode with RBW = 8MHz, VBW = 50MHz, and detector = peak per the guidance of Section 6.0 b) of ANSI C63.10-2013 and KDB 558074 D01 v05. The RBW and VBW were both greater than 50/T, where T is the minimum transmission duration, and the number of sweep points across T was greater than 100. The duty cycles are as follows:
Table 2-1. Measured Duty Cycles Antenna Description 2.3 Following antenna was used for the testing. Frequency [GHz]
2.4 Antenna Gain
(dBi)
-12.2 Table 2-2. Antenna Peak Gain FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 61 V 8.1 05/10/2018 b99.8g99.2n99.1Maximum Achievable Duty CyclesDuty Cycle [%]802.11 Mode/Band2.4GHz 2.4 Test Support Equipment Table 2-3. Test Support Equipment Used Test Configuration 2.5 The EUT was tested per the guidance of KDB 789033 D02 v01r04. ANSI C63.10-2013 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. See Sections 3.2 for AC line conducted emissions test setups, 3.3 for radiated emissions test setups, and 7.2, 7.3, 7.4, 7.5 and 7.6 for antenna port conducted emissions test setups. The worst case configuration was investigated for various types of wristbands, metal and non-metal wristbands. The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. For AC line conducted and radiated test below 1GHz, following configuration were investigated and worst case was reported.
- EUT powered by AC/DC adaptor via USB cable with wire charger
- EUT powered by host PC via USB cable with wire charger Software and Firmware 2.6 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.7 EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and/or no modifications were made during testing. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 61 V 8.1 05/10/2018 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A 3.0 D E S C R I P T I O N O F T E S T S Evaluation Procedure AC Line Conducted Emissions 3.1 The measurement procedures described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) and the guidance provided in KDB 558074 D01 v05 were used in the measurement of the EUT. Deviation from measurement procedure.....................................None 3.2 The line-conducted facility is located inside a 7m x 3.66m x 2.7m shielded enclosure. The shielded enclosure is manufactured by AP Americas. The shielding effectiveness of the shielded room is in accordance with MIL-Std-
285 or NSA 65-6. A 1m x 1.5m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H Line-Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. The external power line filter is EPCOS 2X60A Power Line Filter (100dB Attenuation, 14kHz-18GHz) and the two EPCOs 2X48A filters (100dB Minimum Insertion Loss, 14kHz 10GHz). These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference groundplane. Power cables for support equipment were routed down to the second LISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions is used for final measurements on the same test site. The analyzer is set to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final measurements. Line conducted emissions test results are shown in Section 7.9. Automated test software was used to perform the AC line conducted emissions testing. Automated measurement software utilized is Rohde & Schwarz EMC32, Version 10.20.01. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 61 V 8.1 05/10/2018 Radiated Emissions 3.3 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. An 80cm tall test table made of Styrodur is placed on top of the turn table. For measurements above 1GHz, an additional Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33 depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. 3.4 The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar). Environmental Conditions FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 61 V 8.1 05/10/2018 4.0 A N T E N N A R E Q U I R E M E N T S Excerpt from 15.203 of the FCC Rules/Regulations:
An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The antennas of the EUT are permanently attached. There are no provisions for connections to an external antenna. Conclusion:
The EUT unit complies with the requirement of 15.203. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 61 V 8.1 05/10/2018 5.0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Line Conducted Disturbance Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 3.09 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 61 V 8.1 05/10/2018 6.0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 6-1. Annual Test Equipment Calibration Schedule Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 61 V 8.1 05/10/2018 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number AnritsuML2495APower Meter11/28/2017Annual11/28/20181039008AnritsuMA2411BPower Sensor 10MHz-40GHz11/28/2017Annual11/28/20181027293COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063Rohde & Schwarz HFH2-Z2 Loop Antenna 3/13/2018Annual 3/13/2019100519 7.0 T E S T R E S U L T S 7.1 Summary Company Name:
Apple Inc. FCC ID:
BCG-A1975 FCC Classification:
Digital Transmission System (DTS) FCC Part Section(s) RSS Section(s) Test Description Test Limit Test Test Condition Result Reference 15.247(a)(2) RSS-247 [5.2]
6dB Bandwidth
> 500kHz PASS Section 7.2 15.247(b)(3) RSS-247 [5.4]
Transmitter Output Power 1 Watt PASS Sections 7.3 15.247(e) RSS-247 [5.2]
Transmitter Power Spectral Density 8dBm / 3kHz Band PASS Section 7.4 CONDUCTED 15.247(d) RSS-247 [5.5]
Band Edge /
Out-of-Band Emissions 20dBc PASS Sections 7.5, 7.6 15.205 15.209 RSS-Gen [8.9]
General Field Strength Limits (Restricted Bands and Radiated Emission Limits) Emissions in restricted bands must meet the radiated limits detailed in 15.209 (RSS-Gen [8.9]) RADIATED PASS Sections 7.7, 7.8 15.207 RSS-Gen [8.8]
AC Conducted Emissions 150kHz 30MHz
< FCC 15.207 limits
(RSS-Gen[8.8]) LINE CONDUCTED PASS Section 7.9 Table 7-1. Summary of Test Results Notes:
1) All modes of operation and data rates were investigated. The test results shown in the following sections represent the worst case emissions. 2) The analyzer plots shown in this section were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables and attenuators used as part of the system to connect the EUT to the analyzer at all frequencies of interest. 3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables and attenuators. 4) For conducted spurious emissions, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST WLAN Automation, Version 3.5. 5) For radiated band edge, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST Chamber Automation, Version 0.2.15. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 61 V 8.1 05/10/2018 6dB Bandwidth Measurement 7.2 15.247(a.2); RSS-247 [5.2]
Test Overview and Limit The bandwidth at 6dB down from the highest in-band spectral density is measured with a spectrum analyzer connected to the transmitter antenna terminal of the EUT while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates were investigated and the worst case configuration results are reported in this section. The minimum permissible 6dB bandwidth is 500 kHz. Test Procedure Used ANSI C63.10-2013 Section 11.8.2 Option 2 KDB 558074 D01 v05 Section 8.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability was used to perform the 6dB bandwidth measurement. The X dB bandwidth parameter was set to X = 6. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. RBW = 100kHz 3. VBW 3 x RBW 4. Detector = Peak 5. Trace mode = max hold 6. Sweep = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None FCC ID: BCG-A1975 Figure 7-1. Test Instrument & Measurement Setup MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 61 V 8.1 05/10/2018 Table 7-2. Conducted Bandwidth Measurements Plot 7-1. 6dB Bandwidth Plot (802.11b Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 61 V 8.1 05/10/2018 24121b19.0480.50024427b19.0770.500247213b19.0410.50024121g616.360.50024427g616.370.500247213g616.360.50024121n6.5/7.2 (MCS0)17.620.50024427n6.5/7.2 (MCS0)17.830.500247213n6.5/7.2 (MCS0)17.700.500802.11 ModeChannel No.Measured Bandwidth [MHz]Frequency [MHz]Minimum Bandwidth [MHz]Data Rate [Mbps]
Plot 7-2. 6dB Bandwidth Plot (802.11b Ch. 7) Plot 7-3. 6dB Bandwidth Plot (802.11b Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 61 V 8.1 05/10/2018 Plot 7-4. 6dB Bandwidth Plot (802.11g Ch. 1) Plot 7-5. 6dB Bandwidth Plot (802.11g Ch. 7) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 61 V 8.1 05/10/2018 Plot 7-6. 6dB Bandwidth Plot (802.11g Ch. 13) Plot 7-7. 6dB Bandwidth Plot (802.11n (2.4GHz) Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 61 V 8.1 05/10/2018 Plot 7-8. 6dB Bandwidth Plot (802.11n (2.4GHz) Ch. 7) Plot 7-9. 6dB Bandwidth Plot (802.11n (2.4GHz) Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 61 V 8.1 05/10/2018 7.3 Output Power Measurement 15.247(b.3); RSS-247 [5.4]
Test Overview and Limits A transmitter antenna terminal of EUT is connected to the input of an RF power sensor. Measurement is made using a broadband power meter capable of making peak and average measurements while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. The maximum permissible conducted output power is 1 Watt. Test Procedure Used ANSI C63.10-2013 Section 11.9.1.3 ANSI C63.10-2013 Section 11.9.2.3.2 KDB 558074 D01 v05 Section 8.3.1.3 Test Settings Method PKPM1 (Peak Power Measurement) Peak power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The pulse sensor employs a VBW =
50MHz so this method was only used for signals whose DTS bandwidth was less than or equal to 50MHz. Method AVGPM-G (Average Power Measurement) Average power measurements were performed only when the EUT was transmitting at its maximum power control level using a broadband power meter with a pulse sensor. The power meter implemented triggering and gating capabilities which were set up such that power measurements were recorded only during the ON time of the transmitter. The trace was averaged over 100 traces to obtain the final measured average power. Test Setup The EUT and measurement equipment were set up as shown in the diagrams below. Figure 7-2. Test Instrument & Measurement Setup for Power Meter Measurements Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 61 V 8.1 05/10/2018 7.3.1 15.247(b.3), RSS-247 [5.4(d)]
Peak Output Power Measurement Table 7-3. Peak Conducted Output Power Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 61 V 8.1 05/10/2018 802.11b802.11g802.11n24121PEAK21.3022.3322.3930.00-7.61-12.2010.1936.02-25.8324172PEAK21.3322.7622.7730.00-7.23-12.2010.5736.02-25.4524376PEAK21.3422.9622.9730.00-7.03-12.2010.7736.02-25.2524427PEAK21.3523.0423.0230.00-6.96-12.2010.8436.02-25.18245710PEAK21.3122.9922.9830.00-7.01-12.2010.7936.02-25.23246211PEAK21.3022.4422.4130.00-7.56-12.2010.2436.02-25.78246712PEAK21.3221.3521.1130.00-8.65-12.209.1536.02-26.87247213PEAK20.3416.1416.0430.00-9.66-12.208.1436.02-27.882.4GHzFreq [MHz]ChannelDetectorAnt. Gain [dBi]IEEE Transmission ModeConducted Power Limit [dBm]Conducted Power Margin [dB]Max e.i.r.p. [dBm]Max e.i.r.p. Limit [dBm]e.i.r.p. Margin [dB]
7.3.2 15.247(b.3), RSS-247 [5.4(d)]
Average Output Power Measurement Table 7-4. Average Conducted Output Power Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 61 V 8.1 05/10/2018 802.11b802.11g802.11n24121AVG19.0017.5017.5030.00-11.00-12.206.8036.02-29.2224172AVG19.0018.5018.4030.00-11.00-12.206.8036.02-29.2224376AVG19.0018.4118.4230.00-11.00-12.206.8036.02-29.2224427AVG19.0018.4318.4830.00-11.00-12.206.8036.02-29.22245710AVG19.0018.4918.4730.00-11.00-12.206.8036.02-29.22246211AVG19.0017.4917.5030.00-11.00-12.206.8036.02-29.22246712AVG19.0015.0015.0030.00-11.00-12.206.8036.02-29.22247213AVG18.006.876.8730.00-12.00-12.205.8036.02-30.222.4GHzFreq [MHz]ChannelDetectorAnt. Gain [dBi]IEEE Transmission ModeConducted Power Limit [dBm]Conducted Power Margin [dB]Max e.i.r.p. [dBm]Max e.i.r.p. Limit [dBm]e.i.r.p. Margin [dB]
Power Spectral Density 7.4 15.247(e); RSS-247 [5.2]
Test Overview and Limit The peak power density is measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates were investigated and the worst case configuration results are reported in this section. The maximum permissible power spectral density is 8 dBm in any 3 kHz band. Test Procedure Used ANSI C63.10-2013 Section 11.10.2 Method PKPSD KDB 558074 D01 v05 Section 8.4 Test Settings 1. Analyzer was set to the center frequency of the DTS channel under investigation 2. Span = 1.5 times the DTS channel bandwidth 3. RBW = 3kHz 4. VBW = 1MHz 5. Detector = peak 6. Sweep time = auto couple 7. Trace mode = max hold 8. Trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-3. Test Instrument & Measurement Setup Test Notes Lowest and highest channel that can transmit at maximum power for each mode has been reported. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 61 V 8.1 05/10/2018 Table 7-5. Conducted Power Density Measurements Plot 7-10. Power Spectral Density Plot (802.11b Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 61 V 8.1 05/10/2018 24121b1-1.808.00-9.80Pass24427b1-2.458.00-10.45Pass246712b1-1.288.00-9.28Pass24172g6-7.938.00-15.93Pass24427g6-6.148.00-14.14Pass245710g6-5.608.00-13.60Pass24172n6.5/7.2 (MCS0)-7.618.00-15.61Pass24427n6.5/7.2 (MCS0)-6.278.00-14.27Pass245710n6.5/7.2 (MCS0)-5.118.00-13.11PassChannel No.802.11 ModeFrequency [MHz]Measured Power Spectral Density [dBm]Data Rate [Mbps]Maximum Permissible Power Density [dBm / 3kHz]Pass / FailMargin [dB]
Plot 7-11. Power Spectral Density Plot (802.11b Ch. 7) Plot 7-12. Power Spectral Density Plot (802.11b Ch. 12) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 61 V 8.1 05/10/2018 Plot 7-13. Power Spectral Density Plot (802.11g Ch. 2) Plot 7-14. Power Spectral Density Plot (802.11g Ch. 7) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 61 V 8.1 05/10/2018 Plot 7-15. Power Spectral Density Plot (802.11g Ch. 10) Plot 7-16. Power Spectral Density Plot (802.11n (2.4GHz) Ch. 2) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 61 V 8.1 05/10/2018 Plot 7-17. Power Spectral Density Plot (802.11n (2.4GHz) Ch. 7) Plot 7-18. Power Spectral Density Plot (802.11n (2.4GHz) Ch. 10) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 61 V 8.1 05/10/2018 Conducted Emissions at the Band Edge 7.5 15.247(d); RSS-247 [5.5]
Test Overview and Limit All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. For the following out of band conducted spurious emissions plots at the band edge, the EUT was set at a data rate of 1Mbps for b mode, 6 Mbps for g mode, and 6.5/7.2Mbps for n mode as these settings produced the worst-case emissions. The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100kHz bandwidth per the PSD procedure (Section 7.4). Test Procedure Used ANSI C63.10-2013 Section 11.11.3 KDB 558074 D01 v05 Section 8.7.2 Test Settings 1. Start and stop frequency were set such that the band edge would be placed in the center of the plot 2. Span was set large enough so as to capture all out of band emissions near the band edge 3. RBW = 100kHz 4. VBW = 1MHz 5. Detector = Peak 6. Number of sweep points 2 x Span/RBW 7. Trace mode = max hold 8. Sweep time = auto couple 9. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None FCC ID: BCG-A1975 Figure 7-4. Test Instrument & Measurement Setup MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 61 V 8.1 05/10/2018 Plot 7-19. Band Edge Plot (802.11b Ch. 1) Plot 7-20. Band Edge Plot (802.11b Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 61 V 8.1 05/10/2018 Plot 7-21. Band Edge Plot (802.11g Ch. 1) Plot 7-22. Band Edge Plot (802.11g Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 61 V 8.1 05/10/2018 Plot 7-23. Band Edge Plot (802.11n (2.4GHz) Ch. 1) Plot 7-24. Band Edge Plot (802.11n (2.4GHz) Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 61 V 8.1 05/10/2018 Conducted Spurious Emissions 7.6 15.247(d); RSS-247 [5.5]
Test Overview and Limit All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. For the following out of band conducted spurious emissions plots, the EUT was investigated in all available data rates for b, g, and n modes. The worst case spurious emissions for the 2.4GHz band were found while transmitting in b mode at 1 Mbps and are shown in the plots below. The limit for out-of-band spurious emissions at the band edge is 20dB below the fundamental emission level, as determined from the in-band power measurement of the DTS channel performed in a 100kHz bandwidth per the procedure in Section 11.1 of ANSI C63.10-2013 and KDB 558074 D01 v05. Test Procedure Used ANSI C63.10-2013 Section 11.11.3 KDB 558074 D01 v05 Section 8.5 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to 25GHz (separated into two plots per channel) 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = Peak 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. Test Instrument & Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 61 V 8.1 05/10/2018 Test Notes 1. RBW was set to 1MHz rather than 100kHz in order to increase the measurement speed. 2. The display line shown in the following plots denotes the limit at 30dB below the fundamental emission level measured in a 100kHz bandwidth. However, since the traces in the following plots are measured with a 1MHz RBW, the display line may not necessarily appear to be 30dB below the level of the fundamental in a 1MHz bandwidth. 3. For plots showing conducted spurious emissions near the limit, the frequencies were investigated with a reduced RBW to ensure that no emissions were present. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 61 V 8.1 05/10/2018 Plot 7-25. Conducted Spurious Plot (802.11b Ch. 1) Plot 7-26. Conducted Spurious Plot (802.11b Ch. 1) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 61 V 8.1 05/10/2018 Plot 7-27. Conducted Spurious Plot (802.11b Ch. 7) Plot 7-28. Conducted Spurious Plot (802.11b Ch. 7) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 61 V 8.1 05/10/2018 Plot 7-29. Conducted Spurious Plot (802.11b Ch. 13) Plot 7-30. Conducted Spurious Plot (802.11b Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 61 V 8.1 05/10/2018 Radiated Spurious Emission Measurements Above 1 GHz 7.7 15.247(d) 15.205 & 15.209; RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for radiated spurious emissions. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR and Table 6 of RSS-Gen (8.10) must not exceed the limits shown in Table 7-6 per Section 15.209 and RSS-
Gen (8.9). Frequency Above 960.0 MHz Field Strength Measured Distance
[V/m]
500
[Meters]
3 Table 7-6. Radiated Limits Test Procedures Used ANSI C63.10-2013 Section 6.6.4.3 KDB 558074 D01 v05 Section 8.6, 8.7 Test Settings Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = power average (RMS) 5. Number of measurement points = 1001 (Number of points must be > 2 x span/RBW) 6. Sweep time = auto 7. Trace (RMS) averaging was performed over at least 100 traces Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 1MHz 3. VBW = 3MHz 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 61 V 8.1 05/10/2018 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-6. Test Instrument & Measurement Setup Test Notes 1. The optional test procedures for antenna port conducted measurements of unwanted emissions per the guidance of KDB 558074 D01 v05 were not used to evaluate this device for compliance to radiated limits. All radiated spurious emissions levels were measured in a radiated test setup. 2. All emissions lying in restricted bands specified in Section 15.205 and Section 8.10 of RSS-Gen are below the limit shown in Table 7-6. 3. The antenna is manipulated through typical positions, polarity and length during the tests. The EUT is manipulated through three orthogonal planes. 4. This unit was tested with its standard battery. 5. The spectrum is measured from 9kHz to the 10th harmonic of the fundamental frequency of the transmitter using CISPR quasi peak detector below 1GHz. Above 1 GHz, average and peak measurements were taken using linearly polarized horn antennas. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 6. Emissions below 18GHz were measured at a 3 meter test distance while emissions above 18GHz were measured at a 1 meter test distance with the application of a distance correction factor. 7. The wide spectrum spurious emissions plots shown on the following pages are used only for the purpose of emission identification. Any emissions found to be within 20dB of the limit are fully investigated and the results are shown in this section. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 61 V 8.1 05/10/2018 8. The "-" shown in the following RSE tables are used to denote a noise floor measurement. Sample Calculations Determining Spurious Emissions Levels o Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
o AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
o Margin [dB] = Field Strength Level [dBV/m] Limit [dBV/m]
Radiated Band Edge Measurement Offset o The amplitude offset shown in the radiated restricted band edge plots in Section 7.7 was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss + Attenuator) Preamplifier Gain FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 39 of 61 V 8.1 05/10/2018 7.7.1 Radiated Spurious Emission Measurements 15.247(d) 15.205 & 15.209; RSS-Gen [8.9]
Plot 7-31. Radiated Spurious Plot above 1GHz (802.11b Ch. 1) Plot 7-32. Radiated Spurious Plot above 1GHz (802.11b Ch. 7) Plot 7-33. Radiated Spurious Plot above 1GHz (802.11b Ch. 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 40 of 61 V 8.1 05/10/2018 Radiated Spurious Emissions Measurements (Above 18GHz) 15.209; RSS-Gen [8.9]
Plot 7-34. Radiated Spurious Plot above 18GHz (802.11b Ch. 7, Ant. Pol. H) Plot 7-35. Radiated Spurious Plot above 18GHz (802.11b Ch. 7, Ant. Pol. V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 41 of 61 V 8.1 05/10/2018 Radiated Spurious Emission Measurements 15.247(d) 15.205 & 15.209; RSS-Gen [8.9]
Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11b 1 Mbps 3 Meters 2412MHz 01 Table 7-7. Radiated Measurements Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11b 1 Mbps 3 Meters 2442MHz 07 Table 7-8. Radiated Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 42 of 61 V 8.1 05/10/2018 4824.00AvgV228175-81.118.8134.7053.98-19.284824.00PeakV228175-69.558.8146.2673.98-27.7212060.00AvgV - --82.4820.8045.3253.98-8.6612060.00PeakV - --70.6520.8057.1573.98-16.83AFCL [dB/m]Margin [dB]Field Strength [dBV/m]Limit [dBV/m]Frequency [MHz]Antenna Height [cm]DetectorAnalyzer Level [dBm]Ant. Pol. [H/V]Turntable Azimuth [degree]4884.00AvgV146171-80.439.0735.6453.98-18.344884.00PeakV146171-69.369.0746.7173.98-27.277326.00AvgV - --81.9713.0938.1253.98-15.867326.00PeakV - --70.5913.0949.5073.98-24.4812210.00AvgV - --82.7820.7444.9653.98-9.0212210.00PeakV - --71.0220.7456.7273.98-17.26AFCL [dB/m]Margin [dB]Limit [dBV/m]Field Strength [dBV/m]Antenna Height [cm]DetectorFrequency [MHz]Turntable Azimuth [degree]Analyzer Level [dBm]Ant. Pol. [H/V]
Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11b 1 Mbps 3 Meters 2472MHz 13 Table 7-9. Radiated Measurements FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 43 of 61 V 8.1 05/10/2018 4944.00AvgV - --81.058.9234.8753.98-19.114944.00PeakV - --69.278.9246.6573.98-27.337416.00AvgV - --82.0914.0638.9753.98-15.017416.00PeakV - --70.4014.0650.6673.98-23.3212360.00AvgV - --83.6421.3444.7053.98-9.2812360.00PeakV - --72.4421.3455.9073.98-18.08AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Ant. Pol. [H/V]DetectorFrequency [MHz]Analyzer Level [dBm]Turntable Azimuth [degree]Antenna Height [cm]
7.7.2 Radiated Restricted Band Edge Measurements 15.205 15.209; RSS-Gen [8.9]
The radiated restricted band edge measurements are measured with an EMI test receiver connected to the receive antenna while the EUT is transmitting. Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11b 1Mbps 3 Meters 2412MHz 1 Plot 7-36. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 44 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11b 1Mbps 3 Meters 2467MHz 12 Plot 7-37. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 45 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11b 1Mbps 3 Meters 2472MHz 13 Plot 7-38. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 46 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11n 1Mbps 3 Meters 2412MHz 1 Plot 7-39. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 47 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11n 1Mbps 3 Meters 2417MHz 2 Plot 7-40. Radiated Restricted Lower Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 48 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11n 1Mbps 3 Meters 2457MHz 10 Plot 7-41. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 49 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11n 1Mbps 3 Meters 2462MHz 11 Plot 7-42. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 50 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11n 1Mbps 3 Meters 2467MHz 12 Plot 7-43. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 51 of 61 V 8.1 05/10/2018 Worst Case Mode:
Worst Case Transfer Rate:
Distance of Measurements:
Operating Frequency:
Channel:
802.11n 1Mbps 3 Meters 2472MHz 13 Plot 7-44. Radiated Restricted Upper Band Edge Measurement (Average & Peak) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 52 of 61 V 8.1 05/10/2018 Radiated Spurious Emissions Measurements Below 1GHz 7.8 15.209; RSS-Gen [8.9]
Test Overview and Limit All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive antenna while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for radiated spurious emissions. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All out of band emissions appearing in a restricted band as specified in Section 15.205 of the Title 47 CFR and Table 6 of RSS-Gen (8.10) must not exceed the limits shown in Table 7-10 per Section 15.209 and RSS-Gen (8.9). Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-10. Radiated Limits Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Test Procedures Used ANSI C63.10-2013 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 120kHz (for emissions from 30MHz 1GHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 53 of 61 V 8.1 05/10/2018 Test Setup The EUT and measurement equipment were set up as shown in the diagrams below. Figure 7-7. Radiated Test Setup < 30Mhz Figure 7-8. Radiated Test Setup < 1GHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 54 of 61 V 8.1 05/10/2018 Test Notes 1. All emissions lying in restricted bands specified in 15.205 and RSS-Gen(8.10) are below the limit shown in Table 7-10. 2. The broadband receive antenna is manipulated through vertical and horizontal polarizations during the tests. The EUT is manipulated through three orthogonal planes. 3. This unit was tested with its standard battery. 4. The spectrum is investigated using a peak detector and final measurements are recorded using CISPR quasi peak detector. The worst-case emissions are reported however emissions whose levels were not within 20dB of the respective limits were not reported. 5. Emissions were measured at a 3 meter test distance. 6. Emissions are investigated while operating on the center channel of the mode, band, and modulation that produced the worst case results during the transmitter spurious emissions testing. 7. No spurious emissions were detected within 20dB of the limit below 30MHz. 8. The results recorded using the broadband antenna is known to correlate with the results obtained by using a tuned dipole with an acceptable degree of accuracy. The VSWR for the measurement antenna was found to be less than 2:1. 9. The wide spectrum spurious emissions plots shown on the following pages are used only for the purpose of emission identification. There were no emissions detected in the 30MHz 1GHz frequency range, as shown in the subsequent plots. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 55 of 61 V 8.1 05/10/2018 Radiated Spurious Emissions Measurements (Below 1GHz) 15.209; RSS-Gen [8.9]
Plot 7-45. Radiated Spurious Plot below 1GHz (802.11b Ch. 7, Pol. H & V, with WCP + Laptop) Table 7-11. Radiated Spurious Emissions below 1GHz (802.11b Ch. 7, Pol. H & V, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 56 of 61 V 8.1 05/10/2018 0 10 20 30 40 50 60 70 78.230M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1V-PK+Preview Result 1H-PK+MaxPeak-PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-632.18PeakV10016-62.03-15.8329.1440.00-10.8637.28PeakV100186-60.71-18.5927.7040.00-12.3069.77PeakV100142-64.77-25.3516.8840.00-23.12194.03PeakV100338-59.94-25.3221.7443.52-21.78286.03PeakV100110-63.91-22.1320.9646.02-25.06542.11PeakV100196-72.78-16.8417.3846.02-28.64Analyzer Level [dBm]AFCL [dB/m]Field Strength [dBV/m]Limit [dBV/m]Margin [dB]Frequency [MHz]DetectorAnt. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
Line-Conducted Test Data 7.9 15.207; RSS-Gen [8.8]
Test Overview and Limit All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for conducted spurious emissions. Only the conducted emissions of the configuration that produced the worst case emissions are reported in this section. All conducted emissions must not exceed the limits shown in the table below, per Section 15.207 and RSS-Gen (8.8). Frequency of emission Conducted Limit (dBV)
(MHz) 0.15 0.5 0.5 5 5 30 Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Table 7-12. Conducted Limits
*Decreases with the logarithm of the frequency. Test Procedures Used ANSI C63.10-2013, Section 6.2 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = RMS 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 57 of 61 V 8.1 05/10/2018 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-9. Test Instrument & Measurement Setup Test Notes 1. 2. 3. 4. All modes of operation were investigated and the worst-case emissions are reported using mid channel. The emissions found were not affected by the choice of channel used during testing. The limit for an intentional radiator from 150kHz to 30MHz are specified in Part 15.207 and RSS-Gen(8.8). Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB) QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB) 5. Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV) 6. 7. Traces shown in plot are made using a peak detector. Deviations to the Specifications: None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 58 of 61 V 8.1 05/10/2018 Plot 7-46. Line Conducted Plot with 802.11b (L1, with WCP + Laptop) Table 7-13. Line Conducted Data with 802.11b (L1, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 59 of 61 V 8.1 05/10/2018 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV Plot 7-47. Line Conducted Plot with 802.11b (N, with WCP + Laptop) Table 7-14. Line Conducted Data with 802.11b (N, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 60 of 61 V 8.1 05/10/2018 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV 8.0 C O N C L U S I O N data relate collected the Apple Watch The FCC ID: BCG-A1975 is in compliance with Part 15 Subpart C (15.247) of the FCC Rules and RSS-247 of the Innovation, Science and Economic Development Canada Rules. item(s) tested show only and that the FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-05.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 61 of 61 V 8.1 05/10/2018
1 2 3 4 | 2G3G Test Report | Test Report | 2.48 MiB | November 09 2018 / December 09 2018 |
Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
IC:
APPLICANT:
Application Type:
Model/HVIN:
EUT Type:
FCC Classification:
FCC Rule Part(s):
ISED Specification:
Test Procedure(s):
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT WCDMA Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-02-R1.BCG BCG-A1975 579C-A1975 Apple Inc. Certification A1975 Watch PCS Licensed Transmitter Worn on Body (PCT) 22, 24, 27 RSS-132, RSS-133, RSS-139 ANSI C63.26-2015, ANSI/TIA-603-E-2016, KDB 971168 D01 v03r01, KDB 648474 D03 v01r04 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in 2.947. Test results reported herein relate only to the item(s) tested. This revised Test Report (S/N: 1C1806040008-02-R1.BCG) supersedes and replaces the previously issued test report (S/N:
1C1806040008-02.BCG) on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 59 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 T A B L E O F C O N T E N T S INTRODUCTION ........................................................................................................................................... 4 1.1 Scope ................................................................................................................................................................. 4 PCTEST Test Location ....................................................................................................................................... 4 1.2 1.3 Test Facility / Accreditations ............................................................................................................................... 4 PRODUCT INFORMATION ........................................................................................................................... 5 Equipment Description ....................................................................................................................................... 5 2.1 Device Capabilities ............................................................................................................................................. 5 2.2 Antenna Description ........................................................................................................................................... 5 2.3 2.4 Test Support Equipment ..................................................................................................................................... 6 Test Configuration .............................................................................................................................................. 6 2.5 2.6 Software and Firmware ...................................................................................................................................... 6 2.7 EMI Suppression Device(s)/Modifications .......................................................................................................... 6 DESCRIPTION OF TESTS ........................................................................................................................... 7 Evaluation Procedure ......................................................................................................................................... 7 3.1 3.2 Cellular - Base Frequency Blocks ...................................................................................................................... 7 Cellular - Mobile Frequency Blocks .................................................................................................................... 7 3.3 PCS - Base Frequency Blocks ........................................................................................................................... 7 3.4 3.5 PCS - Mobile Frequency Blocks ......................................................................................................................... 8 AWS - Base Frequency Blocks .......................................................................................................................... 8 3.6 AWS - Mobile Frequency Blocks ........................................................................................................................ 8 3.7 3.8 Radiated Measurements .................................................................................................................................... 9 MEASUREMENT UNCERTAINTY .............................................................................................................. 10 TEST EQUIPMENT CALIBRATION DATA ................................................................................................. 11 SAMPLE CALCULATIONS ......................................................................................................................... 12 TEST RESULTS .......................................................................................................................................... 13 Summary .......................................................................................................................................................... 13 7.1 7.2 Occupied Bandwidth ........................................................................................................................................ 14 Spurious and Harmonic Emissions at Antenna Terminal ................................................................................. 17 7.3 Band Edge Emissions at Antenna Terminal ..................................................................................................... 33 7.4 Peak-Average Ratio ......................................................................................................................................... 39 7.5 7.6 Radiated Power (ERP/EIRP) ............................................................................................................................ 42 Radiated Spurious Emissions Measurements .................................................................................................. 44 7.7 7.8 Frequency Stability / Temperature Variation .................................................................................................... 52 CONCLUSION ............................................................................................................................................. 59 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 59 MEASUREMENT REPORT WCDMA EUT Overview FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 59 WCDMA85022H826.4 - 846.60.000279-5.550.000457-3.404M10F9WWCDMA1700271712.4 - 1752.60.0081289.104M10F9WWCDMA190024E1852.4 - 1907.60.0083189.204M09F9WERPEIRPEmission DesignatorTx Frequency (MHz)Max. Power (W)ModeFCC Rule PartMax. Power (dBm)Max. Power (W)Max. Power (dBm) 1 . 0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01. 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 59 2 . 0 P R O D U C T I N F O R M A T I O N Device Capabilities Equipment Description 2.1 The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The test data contained in this report pertains only to the emissions due to the EUTs 2G/3G licensed transmitters. Test Device Serial No.: C89WP003K473, D92WW00XKK89 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC 2.3 Following antenna was used for the testing. Antenna Description Frequency [MHz]
698 716 777 - 787 824 - 849 1710 - 1755 1850 - 1915 Antenna Gain
(dBi)
-29.00
-29.9
-28.4
-14.4
-14.3 2490 - 2690 Table 2-1. Antenna Peak Gain
-12.1 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 59 2.4 Test Support Equipment Table 2-2. Test Support Equipment Used Test Configuration 2.5 The EUT was tested per the guidance of ANSI/TIA-603-E-2016 and KDB 971168 D01 v03r01. See Section 7.0 of this test report for a description of the radiated and antenna port conducted emissions tests. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel, and various types of wristbands, metal and non-metal wristbands. The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. 2.6 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.7 No EMI suppression device(s) were added and no modifications were made during testing. EMI Suppression Device(s)/Modifications Software and Firmware FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 59 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A 3 . 0 D E S C R I P T I O N O F T E S T S A B 880 Evaluation Procedure A* B*
High Cellular - Base Frequency Blocks 3.1 The measurement procedures described in the Land Mobile FM or PM Communications Equipment Measurements and Performance Standards (ANSI/TIA-603-E-2016) and Measurement Guidance for Certification of Licensed Digital Transmitters (KDB 971168 D01 v03r01) were used in the measurement of the EUT. Deviation from Measurement Procedure..None 3.2 A*
Low 869 BLOCK 1: 869 880 MHz (A* Low + A) BLOCK 2: 880 890 MHz (B) 3.3 A*
Low 824 BLOCK 1: 824 835 MHz (A* Low + A) BLOCK 2: 835 845 MHz (B) BLOCK 4: 846.5 849 MHz (B*) 3.4 A Cellular - Mobile Frequency Blocks PCS - Base Frequency Blocks BLOCK 3: 890 891.5 MHz (A* High) BLOCK 3: 845 846.5 MHz (A* High) A* B*
High BLOCK 4: 891.5 894 MHz (B*) 890 B E F A C 845 835 B 894 849 D 1930 BLOCK 1: 1930 1945 MHz (A) 1950 BLOCK 2: 1945 1950 MHz (D) BLOCK 3: 1950 1965 MHz (B) 1970 BLOCK 4: 1965 1970 MHz (E) 1990 BLOCK 5: 1970 1975 MHz (F) BLOCK 6: 1975 1990 MHz (C) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 59 3.5 A 1850 PCS - Mobile Frequency Blocks D B E F C BLOCK 1: 1850 1865 MHz (A) 1870 BLOCK 2: 1865 1870 MHz (D) BLOCK 3: 1870 1885 MHz (B) 3.6 AWS - Base Frequency Blocks 1890 1910 BLOCK 4: 1885 1890 MHz (E) BLOCK 5: 1890 1895 MHz (F) BLOCK 6: 1895 1910 MHz (C) BLOCK 1: 2110 2120 MHz (A) BLOCK 4: 2135 2140 MHz (D) BLOCK 2: 2120 2130 MHz (B) BLOCK 3: 2130 2135 MHz (C) 3.7 AWS - Mobile Frequency Blocks BLOCK 1: 1710 1720 MHz (A) BLOCK 2: 1720 1730 MHz (B) BLOCK 5: 2140 2145 MHz (E) BLOCK 6: 2145 2155 MHz (F) BLOCK 4: 1735 1740 MHz (D) BLOCK 5: 1740 1745 MHz (E) BLOCK 3: 1730 1735 MHz (C) BLOCK 6: 1745 1755 MHz (F) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 59 Radiated Measurements 3.8 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. For measurements below 1GHz, the absorbers are removed. A raised turntable is used for radiated measurement. The turn table is a continuously rotatable, remote-controlled, metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as a ground plane. An 80cm tall test table made of Styrodur is placed on top of the turn table. A Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. The equipment under test was transmitting while connected to its integral antenna and is placed on a turntable 3 meters from the receive antenna. The receive antenna height is adjusted between 1 and 4 meter height, the turntable is rotated through 360 degrees, and the EUT is manipulated through all orthogonal planes representative of its typical use to achieve the highest reading on the receive spectrum analyzer. Per the guidance of ANSI/TIA-603-E-2016, a half-wave dipole is then substituted in place of the EUT. For emissions above 1GHz, a horn antenna is substituted in place of the EUT. The substitute antenna is driven by a signal generator with the level of the signal generator being adjusted to obtain the same receive spectrum analyzer level previously recorded from the spurious emission from the EUT. The power of the emission is calculated using the following formula:
Pd [dBm] = Pg [dBm] cable loss [dB] + antenna gain [dBd/dBi]
Where, Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 +
10log10(Power [Watts]). Radiated spurious emission levels are investigated with the receive antenna horizontally and vertically polarized per ANSI/TIA-603-E-2016. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 59 4 . 0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 59 5 . 0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 5-1. Test Equipment Notes:
1. For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. 2. Equipment with a calibration date of N/A shown in this list was not used to make direct calibrated measurements. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 59 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz OSP130Open Switch and Control Unit11/21/2017Annual11/21/2018100970Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz CMW500 Wideband Radio Communication Tester 6/11/2018Annual6/11/2019161675Rohde & Schwarz CMW500 Wideband Radio Communication Tester 4/16/2018Annual4/16/2019161617Rohde & Schwarz CMW500 Wideband Radio Communication Tester 12/8/2017Annual12/8/2018164175Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna(400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063ESPECSU-241Temperature Chamber8/20/2018Annual8/20/201992009574 6 . 0 S A M P L E C A L C U L A T I O N S WCDMA Emission Designator Emission Designator = 4M16F9W WCDMA BW = 4.16 MHz F = Frequency Modulation 9 = Composite Digital Info W = Combination (Audio/Data) Spurious Radiated Emission Example: Spurious emission at 3700.40 MHz The receive spectrum analyzer reading at 3 meters with the EUT on the turntable was 81.0 dBm. The gain of the substituted antenna is 8.1 dBi. The signal generator connected to the substituted antenna terminals is adjusted to produce a reading of 81.0 dBm on the spectrum analyzer. The loss of the cable between the signal generator and the terminals of the substituted antenna is 2.0 dB at 3700.40 MHz. So 6.1 dB is added to the signal generator reading of 30.9 dBm yielding 24.80 dBm. The fundamental EIRP was 25.50 dBm so this harmonic was 25.50 dBm (-24.80) = 50.3 dBc. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 59 7 . 0 T E S T R E S U L T S 7.1 Summary Company Name:
Apple Inc. FCC ID:
BCG-A1975 FCC Classification:
PCS Licensed Transmitter Worn on Body (PCT) Mode(s):
WCDMA FCC Part Section(s) RSS Section(s) Test Description Test Limit Test Test Condition Result Reference 2.1049 2.1051 22.917(a) 24.238(a) 27.53(h) N/A 2.1046 2.1055 22.355 24.235 27.54 RSS-Gen (4.6.1) RSS-133(2.3) RSS-139(2.3) RSS-132(5.5) RSS-133(6.5) RSS-139(6.6) RSS-132(5.4) RSS-133(6.4) RSS-139(6.5) RSS-132(5.4) RSS-133(4.1) RSS-139(4.1) RSS-132(5.3) RSS-133(6.3) RSS-139(6.4) 22.913(a)(5) RSS-132(5.4) 24.232(c) RSS-133(6.4) 27.50(d)(4) RSS-139(6.5) 2.1053 22.917(a) 24.238(a) 27.53(h) RSS-132(5.5) RSS-133(6.5) RSS-139(6.6) Occupied Bandwidth N/A PASS Section 7.2 Conducted Band Edge
/ Spurious Emissions
> 43 + log10 (P[Watts]) at Band Edge and for all out-of-band emissions PASS Sections 7.3, 7.4 Peak-Average Ratio
< 13 dB CONDUCTED PASS Section 7.5 Transmitter Conducted Output Power N/A Frequency Stability Effective Radiated Power Equivalent Isotropic Radiated Power Equivalent Isotropic Radiated Power
< 2.5 ppm (Part 22) Emission must remain in band
(Part 24, 27) PASS Section 7.6 PASS Section 7.8
< 7 Watts max. ERP PASS Section 7.6
< 2 Watts max. EIRP PASS Section 7.6
< 1 Watts max. EIRP PASS Section 7.6 RADIATED Radiated Spurious Emissions
> 43 + log10 (P[Watts]) for all out-of-band emissions PASS Section 7.7 Notes:
1) All modes of operation and data rates were investigated. The test results shown in the following sections Table 7-1. Summary of Test Results represent the worst case emissions. 2) The analyzer plots were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables, directional couplers, and attenuators used as part of the system to maintain a link between the call box and the EUT at all frequencies of interest. 3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables, attenuators, and couplers. 4) For conducted spurious emissions, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST 2G/3G Automation, Version 3.11. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 59 7.2 Occupied Bandwidth Test Overview The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. All modes of operation were investigated and the worst case configuration results are reported in this section. Test Procedure Used KDB 971168 D01 v03r01 Section 4.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability was used to perform the 99%
occupied bandwidth and the 26dB bandwidth. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. RBW = 1 5% of the expected OBW 3. VBW 3 x RBW 4. Detector = Peak 5. Trace mode = max hold 6. Sweep = auto couple 7. The trace was allowed to stabilize 8. If necessary, steps 2 7 were repeated after changing the RBW such that it would be within 1 5% of the 99% occupied bandwidth observed in Step 7 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-1. Test Instrument & Measurement Setup Test Notes None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 59 Plot 7-1. Occupied Bandwidth Plot (Cellular WCDMA Mode) Plot 7-2. Occupied Bandwidth Plot (AWS WCDMA Mode) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 59 Plot 7-3. Occupied Bandwidth Plot (PCS WCDMA Mode) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 59 Spurious and Harmonic Emissions at Antenna Terminal 7.3 Test Overview The level of the carrier and the various conducted spurious and harmonic frequencies is measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible attenuation level of any spurious emission is 43 + log10(P[Watts]), where P is the transmitter power in Watts. Test Procedure Used KDB 971168 D01 v03r01 Section 6.0 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to 10GHz for Cell, 20GHz for AWS, 20GHz for PCS (separated into at least two plots per channel) 2. Detector = RMS 3. Trace mode = trace average 4. Sweep time = auto couple 5. The trace was allowed to stabilize 6. Please see test notes below for RBW and VBW settings Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-2. Test Instrument & Measurement Setup Test Notes Per 24.238(b), 27.53(h)(3), and RSS-133(6.5), RSS-139(6.5), compliance with the applicable limits is based on the use of measurement instrumentation employing a resolution bandwidth of 1MHz, and 100 kHz or greater for Part 22 and RSS-132 measurements below 1GHz. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 59 Cellular WCDMA Mode Plot 7-4. Conducted Spurious Plot (Cellular WCDMA Mode - Low Channel) Plot 7-5. Conducted Spurious Plot (Cellular WCDMA Mode - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 59 Plot 7-6. Conducted Spurious Plot (Cellular WCDMA Mode - Low Channel) Plot 7-7. Conducted Spurious Plot (Cellular WCDMA Mode - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 59 Plot 7-8. Conducted Spurious Plot (Cellular WCDMA Mode - Mid Channel) Plot 7-9. Conducted Spurious Plot (Cellular WCDMA Mode - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 59 Plot 7-10. Conducted Spurious Plot (Cellular WCDMA Mode - High Channel) Plot 7-11. Conducted Spurious Plot (Cellular WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 59 Plot 7-12. Conducted Spurious Plot (Cellular WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 59 AWS WCDMA Mode Plot 7-13. Conducted Spurious Plot (AWS WCDMA Mode - Low Channel) Plot 7-14. Conducted Spurious Plot (AWS WCDMA Mode - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 59 Plot 7-15. Conducted Spurious Plot (AWS WCDMA Mode - Low Channel) Plot 7-16. Conducted Spurious Plot (AWS WCDMA Mode - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 59 Plot 7-17. Conducted Spurious Plot (AWS WCDMA Mode - Mid Channel) Plot 7-18. Conducted Spurious Plot (AWS WCDMA Mode - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 59 Plot 7-19. Conducted Spurious Plot (AWS WCDMA Mode - High Channel) Plot 7-20. Conducted Spurious Plot (AWS WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 59 Plot 7-21. Conducted Spurious Plot (AWS WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 59 PCS WCDMA Mode Plot 7-22. Conducted Spurious Plot (PCS WCDMA Mode - Low Channel) Plot 7-23. Conducted Spurious Plot (PCS WCDMA Mode - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 59 Plot 7-24. Conducted Spurious Plot (PCS WCDMA Mode - Low Channel) Plot 7-25. Conducted Spurious Plot (PCS WCDMA Mode - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 59 Plot 7-26. Conducted Spurious Plot (PCS WCDMA Mode - Mid Channel) Plot 7-27. Conducted Spurious Plot (PCS WCDMA Mode - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 59 Plot 7-28. Conducted Spurious Plot (PCS WCDMA Mode - High Channel) Plot 7-29. Conducted Spurious Plot (PCS WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 59 Plot 7-30. Conducted Spurious Plot (PCS WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 59 Band Edge Emissions at Antenna Terminal 7.4 Test Overview All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible attenuation level of any spurious emission is 43 + log10(P[Watts]), where P is the transmitter power in Watts. Test Procedure Used KDB 971168 D01 v03r01 Section 6.0 Test Settings 1. Start and stop frequency were set such that the band edge would be placed in the center of the plot 2. Span was set large enough so as to capture all out of band emissions near the band edge 3. RBW > 1% of the emission bandwidth 4. VBW > 3 x RBW 5. Detector = RMS 6. Number of sweep points 2 x Span/RBW 7. Trace mode = trace average 8. Sweep time = auto couple 9. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-3. Test Instrument & Measurement Setup Test Notes Per 22.917(b), 24.238(b), 27.53(h)(3), and RSS-132(5.5), RSS-133(6.5), RSS-139(6.5), in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed to demonstrate compliance with the out-of-band emissions limit. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 59 Cellular WCDMA Mode Plot 7-31. Band Edge Plot (Cellular WCDMA Mode - Low Channel) Plot 7-32. Band Edge Plot (Cellular WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 59 AWS WCDMA Mode Plot 7-33. Band Edge Plot (AWS WCDMA Mode - Low Channel) Plot 7-34. 4MHz Span Plot (AWS WCDMA Mode - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 59 Plot 7-35. Band Edge Plot (AWS WCDMA Mode - High Channel) Plot 7-36. 4MHz Span Plot (AWS WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 59 PCS WCDMA Mode Plot 7-37. Band Edge Plot (PCS WCDMA Mode - Low Channel) Plot 7-38. 4MHz Span Plot (PCS WCDMA Mode - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 59 Plot 7-39. Band Edge Plot (PCS WCDMA Mode - High Channel) Plot 7-40. 4MHz Span Plot (PCS WCDMA Mode - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 59 Peak-Average Ratio 7.5 Test Overview A peak to average ratio measurement is performed at the conducted port of the EUT. The spectrum analyzers Complementary Cumulative Distribution Function (CCDF) measurement profile is used to determine the largest deviation between the average and the peak power of the EUT in a given bandwidth. The CCDF curve shows how much time the peak waveform spends at or above a given average power level. The percent of time the signal spends at or above the level defines the probability for that particular power level. Test Procedure Used KDB 971168 D01 v03r01 Section 5.7.1 Test Settings 1. The signal analyzers CCDF measurement profile is enabled 2. Frequency = carrier center frequency 3. Measurement BW > Emission bandwidth of signal 4. The signal analyzer was set to collect one million samples to generate the CCDF curve 5. The measurement interval was set depending on the type of signal analyzed. For continuous signals
(>98% duty cycle), the measurement interval was set to 1ms. Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-4. Test Instrument & Measurement Setup Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 39 of 59 Plot 7-41. Peak-Average Ratio Plot (Cellular WCDMA Mode) Plot 7-42. Peak-Average Ratio Plot (AWS WCDMA Mode) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 40 of 59 Plot 7-43. Peak-Average Ratio Plot (PCS WCDMA Mode) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 41 of 59 Radiated Power (ERP/EIRP) 7.6 Test Overview Effective Radiated Power (ERP) and Equivalent Isotropic Radiated Power (EIRP) measurements are determined using the calculation described below. Test Procedures Used KDB 971168 D01 v03r01 Section 5.2.1 Test Settings The relevant equation for determining the ERP or EIRP from the conducted RF output power measured is:
ERP/EIRP = PMeas LC + GT Where:
ERP/EIRP = effective or equivalent radiated power, respectively (expressed in the same units as PMeas, typically dBW or dBm) PMeas = measured transmitter output power or PSD, in dBW or dBm LC = signal attenuation in the connecting cable between the transmitter and antenna in dB GT = gain of the transmitting antenna, in dBd (ERP) or dBi (EIRP) Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. ERP/EIRP Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 42 of 59 Test Notes 1) This device employs UMTS technology with WCDMA (AMR/RMC), HSDPA, and HSUPA capabilities. For WCDMA and HSUPA transmission, all configurations were investigated and the worst case UMTS emissions were found in RMC WCDMA mode at 12.2kbps with HSDPA inactive and TPC bits all set to 1."
2) This unit was tested with its standard battery. 3) The Ant. Gains (GT) are listed in dBi. Table 7-2. ERP/EIRP (Cellular WCDMA) Table 7-3. EIRP (AWS WCDMA) Table 7-4. EIRP (PCS WCDMA) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 43 of 59 826.40WCDMA85025.00-28.40-5.550.00027938.45-44.00-3.400.00040.61-44.01836.60WCDMA85025.00-28.40-5.550.00027938.45-44.00-3.400.00040.61-44.01846.60WCDMA85025.00-28.40-5.550.00027938.45-44.00-3.400.00040.61-44.01Conducted Power [dBm]ERP [dBm]ERP [Watts]ERP Limit [dBm]Margin [dB]ModeFrequency [MHz]Ant. Gain [dBi]EIRP [dBm]EIRP [Watts]EIRP Limit [dBm]Margin [dB]Sub. Ant.1712.40WCDMA170023.46-14.409.060.00805430.00-20.941732.60WCDMA170023.42-14.409.020.00798030.00-20.981752.60WCDMA170023.50-14.409.100.00812830.00-20.90Conducted Power [dBm]Ant. Gain [dBi]ModeEIRP [dBm]Frequency [MHz]EIRP [Watts]EIRP Limit [dBm]Margin [dB]Sub. Ant.1852.40WCDMA190023.50-14.309.200.00831833.01-23.811880.00WCDMA190023.47-14.309.170.00826033.01-23.841907.60WCDMA190023.43-14.309.130.00818533.01-23.88Frequency [MHz]ModeEIRP Limit [dBm]Margin [dB]EIRP [Watts]Ant. Gain [dBi]EIRP [dBm]Conducted Power [dBm]Sub. Ant. Radiated Spurious Emissions Measurements 7.7 Test Overview Radiated spurious emissions measurements are performed using the substitution method described in ANSI/TIA-
603-E-2016 with the EUT transmitting into an integral antenna. Measurements on signals operating below 1GHz are performed using horizontally and vertically polarized tuned dipole antennas. Measurements on signals operating above 1GHz are performed using vertically and horizontally polarized broadband horn antennas. All measurements are performed as peak measurements while the EUT is operating at maximum power, and at the appropriate frequencies. Test Procedures Used KDB 971168 D01 v03r01 Section 5.8 ANSI/TIA-603-E-2016 Section 2.2.12 Test Settings 1. RBW = 100kHz for emissions below 1GHz and 1MHz for emissions above 1GHz 2. VBW 3 x RBW 3. Span = 1.5 times the OBW 4. No. of sweep points > 2 x span / RBW 5. Detector = RMS 6. Trace mode = Average (Max Hold for pulsed emissions) 7. The trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 44 of 59 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-6. Test Instrument & Measurement Setup Test Notes 1) This device employs UMTS technology with WCDMA (AMR/RMC), HSDPA, and HSUPA capabilities. For WCDMA and HSUPA transmission, all configurations were investigated and the worst case UMTS emissions were found in RMC WCDMA mode at 12.2kbps with HSDPA inactive and TPC bits all set to 1."
2) This unit was tested with its standard battery. 3) The EUT was tested in three orthogonal planes and in all possible test configurations and positioning. 4) The spectrum is measured from 9kHz to the 10th harmonic of the fundamental frequency of the The worst case setup is reported in the tables below. transmitter. The worst-case emissions are reported. 5) Emissions below 18GHz were measured at a 3 meter test distance while emissions above 18GHz were measured at a 1 meter test distance with the application of a distance correction factor. 6) The "-" shown in the following RSE tables are used to denote a noise floor measurement. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 45 of 59 Cellular WCDMA Mode Table 7-5. Radiated Spurious Data (Cellular WCDMA Mode Ch. 4132) Table 7-6. Radiated Spurious Data (Cellular WCDMA Mode Ch. 4183) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 46 of 59 OPERATING FREQUENCY: 826.40MHzCHANNEL: 4132MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm1652.80V - - -72.165.30-66.86-53.92479.20V - - -68.085.43-62.65-49.73305.60V - - -70.277.18-63.10-50.1Substitute Antenna Gain [dBi]Margin [dB]Spurious Emission Level [dBm]Ant. Pol. [H/V]Frequency [MHz]Level at Antenna Terminals [dBm]Turntable Azimuth [degree]Antenna Height [cm]OPERATING FREQUENCY: 836.60MHzCHANNEL: 4183MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm1673.20V - - -72.295.16-67.14-54.12509.80V - - -68.905.39-63.51-50.53346.40V - - -70.677.31-63.37-50.4Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Frequency [MHz]
Table 7-7. Radiated Spurious Data (Cellular WCDMA Mode Ch. 4233) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 47 of 59 OPERATING FREQUENCY: 846.60MHzCHANNEL: 4233MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm1693.20V - - -72.305.02-67.29-54.32539.80V - - -68.915.35-63.56-50.63386.40V - - -67.777.43-60.34-47.3Margin [dB]Spurious Emission Level [dBm]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Frequency [MHz]Turntable Azimuth [degree]Ant. Pol. [H/V]Antenna Height [cm]
AWS WCDMA Mode Table 7-8. Radiated Spurious Data (AWS WCDMA Mode Ch. 1312) Table 7-9. Radiated Spurious Data (AWS WCDMA Mode Ch. 1413) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 48 of 59 OPERATING FREQUENCY: 1712.40MHzCHANNEL: 1312MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm3424.80H - --69.817.53-62.27-49.35137.20H - --70.889.79-61.09-48.16849.60H - --68.8510.96-57.89-44.9Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Ant. Pol. [H/V]Antenna Height [cm]Frequency [MHz]Level at Antenna Terminals [dBm]Margin [dB]Turntable Azimuth [degree]OPERATING FREQUENCY: 1732.60MHzCHANNEL: 1413MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm3465.20H - --70.907.62-63.27-50.35197.80H - --70.589.75-60.83-47.86930.40H - --70.1211.05-59.07-46.1Margin [dB]Turntable Azimuth [degree]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Ant. Pol. [H/V]Antenna Height [cm]Spurious Emission Level [dBm]Frequency [MHz]
Table 7-10. Radiated Spurious Data (AWS WCDMA Mode Ch. 1513) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 49 of 59 OPERATING FREQUENCY: 1752.60MHzCHANNEL: 1513MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm3505.20H - --69.977.68-62.29-49.35257.80H - --69.239.74-59.49-46.57010.40H - --69.0311.08-57.94-44.9Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Turntable Azimuth [degree]Spurious Emission Level [dBm]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Margin [dB]
PCS WCDMA Mode Table 7-11. Radiated Spurious Data (PCS WCDMA Mode Ch. 9262) Table 7-12. Radiated Spurious Data (PCS WCDMA Mode Ch. 9400) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 50 of 59 OPERATING FREQUENCY: 1852.40MHzCHANNEL: 9262MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm3704.80H - --69.617.09-62.51-49.55557.20H - --70.2910.07-60.22-47.27409.60H - --68.7011.60-57.10-44.1Margin [dB]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Turntable Azimuth [degree]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]OPERATING FREQUENCY: 1880.00MHzCHANNEL: 9400MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm3760.00H - --69.587.10-62.48-49.55640.00H - --69.6610.04-59.61-46.67520.00H - --69.6811.68-58.00-45.0Margin [dB]Turntable Azimuth [degree]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Level at Antenna Terminals [dBm]Ant. Pol. [H/V]Frequency [MHz]Antenna Height [cm]
Table 7-13. Radiated Spurious Data (PCS WCDMA Mode Ch. 9538) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 51 of 59 OPERATING FREQUENCY: 1907.60MHzCHANNEL: 9538MODULATION SIGNAL: WCDMADISTANCE: 3metersLIMIT: -13dBm3815.20H - --69.747.29-62.46-49.55722.80H - --70.9210.05-60.87-47.97630.40H - --69.6311.75-57.88-44.9Level at Antenna Terminals [dBm]Turntable Azimuth [degree]Spurious Emission Level [dBm]Margin [dB]Substitute Antenna Gain [dBi]Ant. Pol. [H/V]Frequency [MHz]Antenna Height [cm]
Frequency Stability / Temperature Variation 7.8 Test Overview and Limit Frequency stability testing is performed in accordance with the guidelines of ANSI/TIA-603-E-2016. The frequency stability of the transmitter is measured by:
a.) Temperature: The temperature is varied from -30C to +50C in 10C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. For Part 22, RSS-132, and RSS-133, the frequency stability of the transmitter shall be maintained within 0.00025% (2.5 ppm) of the center frequency. For Part 24, Part 27, and RSS-139, the frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. Test Procedure Used ANSI/TIA-603-E-2016 Test Settings 1. The carrier frequency of the transmitter is measured at room temperature (20C to provide a reference). 2. The equipment is turned on in a standby condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10C intervals ranging from -30C to +50C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Test Setup The EUT was connected via an RF cable to a spectrum analyzer with the EUT placed inside an environmental chamber. Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 52 of 59 Frequency Stability / Temperature Variation Table 7-14. Frequency Stability Data (Cellular WCDMA Mode Ch. 4183) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 53 of 59 OPERATING FREQUENCY: 836,600,000HzCHANNEL: 4183REFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.00025% or 2.5 ppm100 % + 20836,599,995-5-0.0000006100 %- 30836,600,00440.0000005100 %- 20836,599,997-3-0.0000003100 %- 10836,600,00330.0000003100 %3.80 0836,599,997-3-0.0000004100 %+ 10836,599,997-3-0.0000004100 %+ 20836,600,00330.0000004100 % + 30836,600,00770.0000008100 %+ 40836,600,00440.0000004100 %+ 50836,600,00440.0000004BATT. ENDPOINT3.40+ 20836,600,00770.0000008VOLTAGE (%)POWER (VDC)TEMP (oC)3.80FREQUENCY (Hz)Freq. Dev. (Hz)Deviation (%) Frequency Stability / Temperature Variation Figure 7-7. Frequency Stability Graph (Cellular WCDMA Mode Ch. 4183) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 54 of 59 Frequency Stability / Temperature Variation Table 7-15. Frequency Stability Data (AWS WCDMA Mode Ch. 1413) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 55 of 59 OPERATING FREQUENCY: 1,732,600,000HzCHANNEL: 1413REFERENCE VOLTAGE: VDC100 % + 201,732,599,991-9-0.0000005100 %- 301,732,600,00660.0000004100 %- 201,732,599,993-7-0.0000004100 %- 101,732,600,00660.0000003100 %3.80 01,732,600,00660.0000004100 %+ 101,732,599,990-10-0.0000006100 %+ 201,732,599,994-6-0.0000004100 % + 301,732,600,00660.0000003100 %+ 401,732,600,00770.0000004100 %+ 501,732,600,00990.0000005BATT. ENDPOINT3.40+ 201,732,600,014140.0000008Freq. Dev. (Hz)FREQUENCY (Hz)POWER (VDC)TEMP (oC)3.80VOLTAGE (%)Deviation (%) Frequency Stability / Temperature Variation Figure 7-8. Frequency Stability Graph (AWS WCDMA Mode Ch. 1413) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 56 of 59 Frequency Stability / Temperature Variation Table 7-16. Frequency Stability Data (PCS WCDMA Mode Ch. 9400) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 57 of 59 OPERATING FREQUENCY: 1,880,000,000HzCHANNEL: 9400REFERENCE VOLTAGE: VDC100 %+ 201,880,000,00770.0000004100 %- 301,880,000,00770.0000004100 %- 201,879,999,992-8-0.0000004100 %- 101,879,999,995-5-0.0000003100 %3.80 01,879,999,989-11-0.0000006100 %+ 101,880,000,00770.0000004100 %+ 201,880,000,00660.0000003100 % + 301,880,000,00660.0000003100 %+ 401,880,000,00770.0000004100 %+ 501,880,000,00880.0000004BATT. ENDPOINT3.40+ 201,879,999,990-10-0.0000005Freq. Dev. (Hz)Deviation (%)VOLTAGE (%)POWER (VDC)TEMP (oC)3.80FREQUENCY (Hz) Frequency Stability / Temperature Variation Figure 7-9. Frequency Stability Graph (PCS WCDMA Mode Ch. 9400) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 58 of 59 8 . 0 C O N C L U S I O N The data collected the Apple Watch FCC ID: BCG-A1975 complies with all the requirements of Part 22, 24 & 27 of the FCC Rules and RSS-132, RSS-133 & RSS-139 of the Innovation, Science and Economic Development Canada Rules. tested and show relate only item(s) that the to FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-02-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 59 of 59
1 2 3 4 | LTE Test Report 1 | Test Report | 5.29 MiB | November 09 2018 / December 09 2018 |
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT LTE Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-03-R1.BCG BCG-A1975 Apple Inc. Certification A1975 Watch PCS Licensed Transmitter Worn on Body (PCT) 22, 24, & 27 ANSI C63.26-2015, ANSI/TIA-603-E-2016, KDB 971168 D01 v03r01, KDB 648474 D03 v01r04 Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
APPLICANT:
Application Type:
Model:
EUT Type:
FCC Classification:
FCC Rule Part(s):
Test Procedure(s):
This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in 2.947. Test results reported herein relate only to the item(s) tested. This revised Test Report (S/N: 1C1806040008-03-R1.BCG) supersedes and replaces the previously issued test report (S/N:
1C1806040008-03.BCG) on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 226 V 8.1 05/10/2018 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 T A B L E O F C O N T E N T S INTRODUCTION ........................................................................................................................................... 5 Scope ................................................................................................................................................................. 5 1.1 1.2 PCTEST Test Location ....................................................................................................................................... 5 1.3 Test Facility / Accreditations ............................................................................................................................... 5 PRODUCT INFORMATION ........................................................................................................................... 6 2.1 Equipment Description ....................................................................................................................................... 6 Device Capabilities ............................................................................................................................................. 6 2.2 Antenna Description ........................................................................................................................................... 6 2.3 2.4 Test Support Equipment ..................................................................................................................................... 7 Test Configuration .............................................................................................................................................. 7 2.5 Software and Firmware ...................................................................................................................................... 7 2.6 2.7 EMI Suppression Device(s)/Modifications .......................................................................................................... 7 DESCRIPTION OF TESTS ........................................................................................................................... 8 3.1 Measurement Procedure .................................................................................................................................... 8 Block C Frequency Range ................................................................................................................................. 8 3.2 3.3 Block A Frequency Range .................................................................................................................................. 8 Cellular - Base Frequency Blocks ...................................................................................................................... 8 3.4 Cellular - Mobile Frequency Blocks .................................................................................................................... 8 3.5 3.6 PCS - Base Frequency Blocks ........................................................................................................................... 9 PCS - Mobile Frequency Blocks ......................................................................................................................... 9 3.7 AWS - Base Frequency Blocks .......................................................................................................................... 9 3.8 3.9 AWS - Mobile Frequency Blocks ........................................................................................................................ 9 3.10 BRS/EBS Frequency Block .............................................................................................................................. 10 3.11 Radiated Power and Radiated Spurious Emissions ......................................................................................... 11 MEASUREMENT UNCERTAINTY .............................................................................................................. 12 TEST EQUIPMENT CALIBRATION DATA ................................................................................................. 13 SAMPLE CALCULATIONS ......................................................................................................................... 14 TEST RESULTS .......................................................................................................................................... 15 Summary .......................................................................................................................................................... 15 7.1 Occupied Bandwidth ........................................................................................................................................ 17 7.2 7.3 Spurious and Harmonic Emissions at Antenna Terminal ................................................................................. 56 Band Edge Emissions at Antenna Terminal ................................................................................................... 102 7.4 Peak-Average Ratio ....................................................................................................................................... 162 7.5 Radiated Power (ERP/EIRP) .......................................................................................................................... 181 7.6 7.7 Radiated Spurious Emissions Measurements ................................................................................................ 190 7.8 Frequency Stability / Temperature Variation .................................................................................................. 209 CONCLUSION ........................................................................................................................................... 226 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 226 V 8.1 05/10/2018 MEASUREMENT REPORT FCC Part 22, 24, & 27 EUT Overview (<1GHz) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 226 V 8.1 05/10/2018 LTE Band 1227699.7 - 715.30.0002-6.150.0004-4.001M09G7WQPSKLTE Band 1227699.7 - 715.30.0002-7.210.0003-5.061M09D7W16QAMLTE Band 1227700.5 - 714.50.0002-6.150.0004-4.002M74G7WQPSKLTE Band 1227700.5 - 714.50.0002-7.200.0003-5.052M73D7W16QAMLTE Band 1227701.5 - 713.50.0002-6.150.0004-4.004M54G7WQPSKLTE Band 1227701.5 - 713.50.0002-7.170.0003-5.024M53D7W16QAMLTE Band 1227704 - 7110.0002-6.150.0004-4.009M11G7WQPSKLTE Band 1227704 - 7110.0002-7.320.0003-5.175M40D7W16QAMLTE Band 1727706.5 - 713.50.0002-6.470.0004-4.324M55G7WQPSKLTE Band 1727706.5 - 713.50.0002-7.520.0003-5.374M55D7W16QAMLTE Band 1727709 - 7110.0002-6.470.0004-4.329M11G7WQPSKLTE Band 1727709 - 7110.0002-7.530.0003-5.385M53D7W16QAMLTE Band 1327779.5 - 784.50.0002-7.050.0003-4.904M55G7WQPSKLTE Band 1327779.5 - 784.50.0002-7.460.0003-5.314M54D7W16QAMLTE Band 13277820.0002-7.300.0003-5.159M09G7WQPSKLTE Band 13277820.0002-8.090.0003-5.945M51D7W16QAMLTE Band 522H824.7 - 848.30.0003-5.800.0004-3.651M11G7WQPSKLTE Band 522H824.7 - 848.30.0002-6.640.0004-4.491M11D7W16QAMLTE Band 522H825.5 - 847.50.0003-5.780.0004-3.632M72G7WQPSKLTE Band 522H825.5 - 847.50.0002-6.660.0004-4.512M73D7W16QAMLTE Band 522H826.5 - 846.50.0003-5.640.0004-3.494M56G7WQPSKLTE Band 522H826.5 - 846.50.0002-6.580.0004-4.434M53D7W16QAMLTE Band 522H829 - 8440.0003-5.550.0005-3.409M16G7WQPSKLTE Band 522H829 - 8440.0002-6.480.0004-4.335M50D7W16QAMLTE Band 2622H824.7 - 848.30.0003-5.800.0004-3.651M11G7WQPSKLTE Band 2622H824.7 - 848.30.0002-6.680.0004-4.531M11D7W16QAMLTE Band 2622H825.5 - 847.50.0003-5.800.0004-3.652M73G7WQPSKLTE Band 2622H825.5 - 847.50.0002-6.610.0004-4.462M72D7W16QAMLTE Band 2622H826.5 - 846.50.0003-5.790.0004-3.644M54G7WQPSKLTE Band 2622H826.5 - 846.50.0002-6.670.0004-4.524M53D7W16QAMLTE Band 2622H829 - 8440.0003-5.800.0004-3.659M12G7WQPSKLTE Band 2622H829 - 8440.0002-6.620.0004-4.475M42D7W16QAMFCC Rule PartEmission DesignatorModulationERPMax. Power (W)Max. Power (dBm)EIRPMax. Power (W)Max. Power (dBm)ModeTx Frequency (MHz) EUT Overview (>1GHz) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 226 V 8.1 05/10/2018 LTE Band 4271710.7 - 1754.30.0088.951M10G7WQPSKLTE Band 4271710.7 - 1754.30.0078.311M11D7W16QAMLTE Band 4271711.5 - 1753.50.0088.942M74G7WQPSKLTE Band 4271711.5 - 1753.50.0078.232M73D7W16QAMLTE Band 4271712.5 - 1752.50.0088.984M55G7WQPSKLTE Band 4271712.5 - 1752.50.0078.314M53D7W16QAMLTE Band 4271715 - 17500.0088.959M11G7WQPSKLTE Band 4271715 - 17500.0078.505M41D7W16QAMLTE Band 4271717.5 - 1747.50.0088.9813M6G7WQPSKLTE Band 4271717.5 - 1747.50.0078.415M33D7W16QAMLTE Band 4271720 - 17450.0088.9518M1G7WQPSKLTE Band 4271720 - 17450.0078.625M53D7W16QAMLTE Band 224E1850.7 - 1909.30.0089.051M11G7WQPSKLTE Band 224E1850.7 - 1909.30.0068.101M11D7W16QAMLTE Band 224E1851.5 - 1908.50.0089.102M72G7WQPSKLTE Band 224E1851.5 - 1908.50.0068.112M73D7W16QAMLTE Band 224E1852.5 - 1907.50.0089.104M55G7WQPSKLTE Band 224E1852.5 - 1907.50.0078.194M56D7W16QAMLTE Band 224E1855 - 19050.0089.099M12G7WQPSKLTE Band 224E1855 - 19050.0078.205M37D7W16QAMLTE Band 224E1857.5 - 1902.50.0089.1113M6G7WQPSKLTE Band 224E1857.5 - 1902.50.0078.315M28D7W16QAMLTE Band 224E1860 - 19000.0089.1418M1G7WQPSKLTE Band 224E1860 - 19000.0078.375M46D7W16QAMLTE Band 2524E1850.7 - 1914.30.0089.171M11G7WQPSKLTE Band 2524E1850.7 - 1914.30.0078.151M11D7W16QAMLTE Band 2524E1851.5 - 1913.50.0089.182M73G7WQPSKLTE Band 2524E1851.5 - 1913.50.0068.062M74D7W16QAMLTE Band 2524E1852.5 - 1912.50.0089.204M55G7WQPSKLTE Band 2524E1852.5 - 1912.50.0068.114M54D7W16QAMLTE Band 2524E1855 - 19100.0089.209M10G7WQPSKLTE Band 2524E1855 - 19100.0078.225M49D7W16QAMLTE Band 2524E1857.5 - 1907.50.0089.2013M6G7WQPSKLTE Band 2524E1857.5 - 1907.50.0078.195M35D7W16QAMLTE Band 2524E1860 - 19050.0089.2018M1G7WQPSKLTE Band 2524E1860 - 19050.0078.245M44D7W16QAMLTE Band 41272498.5 - 2687.50.01210.724M53G7WQPSKLTE Band 41272498.5 - 2687.50.01110.254M54D7W16QAMLTE Band 41272501 - 26850.01210.769M09G7WQPSKLTE Band 41272501 - 26850.01110.345M37D7W16QAMLTE Band 41272503.5 - 2682.50.01210.7013M6G7WQPSKLTE Band 41272503.5 - 2682.50.01110.355M31D7W16QAMLTE Band 41272506 - 26800.01210.6818M1G7WQPSKLTE Band 41272506 - 26800.01110.405M47D7W16QAMModeTx Frequency (MHz)EIRPMax. Power (W)Max. Power (dBm)FCC Rule PartEmission DesignatorModulation 1 . 0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01. 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 226 V 8.1 05/10/2018 2 . 0 P R O D U C T I N F O R M A T I O N 2.1 Equipment Description The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The test data contained in this report pertains only to the emissions due to the EUTs LTE function. Test Device Serial No.: C89WP003K473, D92WW00XKK89 Device Capabilities 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC LTE Band 26 (814.7 849 MHz) overlaps the entire frequency range of LTE Band 5 (824 849 MHz). Therefore, test data provided in this report covers Band 5 and the portion of Band 26 subject to Part 22. 2.3 Following antenna was used for the testing. Antenna Description Frequency [MHz]
698-716 777-787 814-824 824-849 1710-1755 1850-1915 2490-2690 Antenna Gain
(dBi)
-29
-29.9
-28.3
-28.4
-14.4
-14.3
-12.1 Table 2-1. Antenna Peak Gain FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 226 V 8.1 05/10/2018 2.4 Test Support Equipment Table 2-2. Test Support Equipment Used Test Configuration 2.5 The EUT was tested per the guidance of ANSI/TIA-603-E-2016 and KDB 971168 D01 v03r01. See Section 7.0 of this test report for a description of the radiated and antenna port conducted emissions tests. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel, and various types of wristbands, metal and non-metal wristbands The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. 16-QAM Modulation uplink is only supported for RBs of 27 or less. 2.6 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.7 No EMI suppression device(s) were added and no modifications were made during testing. EMI Suppression Device(s)/Modifications Software and Firmware FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 226 V 8.1 05/10/2018 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A 3 . 0 D E S C R I P T I O N O F T E S T S Measurement Procedure Block A Frequency Range Block C Frequency Range 3.1 The measurement procedures described in the document titled Land Mobile FM or PM Communications Equipment Measurements and Performance Standards (ANSI/TIA-603-E-2016) and Procedures for Compliance Measurement of the Fundamental Emission Power of Licensed Wideband (> 1 MHz) Digital Transmission Systems (KDB 971168 D01 v03r01) were used in the measurement of the EUT. 3.2 Two paired channels of 11 megahertz each are available for assignment in Block C in the 746-757 MHz and 776-
787 MHz bands. In the event that no licenses for two channels in this Block C are assigned based on the results of the first auction in which such licenses were offered because the auction results do not satisfy the applicable reserve price, the spectrum in the 746-757 MHz and 776-787 MHz bands will instead be made available for assignment at a subsequent auction as follows: (i) Two paired channels of 6 megahertz each available for assignment in Block C1 in the 746-752 MHz and 776-782 MHz bands. (ii) Two paired channels of 5 megahertz each available for assignment in Block C2 in the 752-757 MHz and 782-787 MHz bands. 3.3 698-746 MHz band. The following frequencies are available for licensing pursuant to this part in the 698-746 MHz band: (1) Three paired channel blocks of 12 megahertz each are available for assignment as follows:
Block A: 698-704 MHz and 728-734 MHz;
Block B: 704-710 MHz and 734-740 MHz; and Block C: 710-716 MHz and 740-746 MHz. 3.4 A*
Low 869 BLOCK 1: 869 880 MHz (A* Low + A) BLOCK 2: 880 890 MHz (B) 3.5 A*
Low 824 BLOCK 1: 824 835 MHz (A* Low + A) BLOCK 2: 835 845 MHz (B) BLOCK 4: 846.5 849 MHz (B*) BLOCK 3: 890 891.5 MHz (A* High) BLOCK 4: 891.5 894 MHz (B*) Cellular - Mobile Frequency Blocks Cellular - Base Frequency Blocks BLOCK 3: 845 846.5 MHz (A* High) A* B*
High A* B*
High 890 880 B B A A 845 835 894 849 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 226 V 8.1 05/10/2018 3.6 A 1930 3.7 A 1850 3.8 3.9 PCS - Base Frequency Blocks D B E F C 1950 BLOCK 1: 1930 1945 MHz (A) BLOCK 2: 1945 1950 MHz (D) BLOCK 3: 1950 1965 MHz (B) 1970 BLOCK 4: 1965 1970 MHz (E) BLOCK 5: 1970 1975 MHz (F) BLOCK 6: 1975 1990 MHz (C) 1990 PCS - Mobile Frequency Blocks D B E F C 1910 1870 BLOCK 1: 1850 1865 MHz (A) BLOCK 2: 1865 1870 MHz (D) BLOCK 3: 1870 1885 MHz (B) 1890 BLOCK 4: 1885 1890 MHz (E) BLOCK 5: 1890 1895 MHz (F) BLOCK 6: 1895 1910 MHz (C) AWS - Base Frequency Blocks BLOCK 1: 2110 2120 MHz (A) BLOCK 2: 2120 2130 MHz (B) BLOCK 3: 2130 2135 MHz (C) BLOCK 4: 2135 2140 MHz (D) BLOCK 5: 2140 2145 MHz (E) BLOCK 6: 2145 2155 MHz (F) AWS - Mobile Frequency Blocks BLOCK 1: 1710 1720 MHz (A) BLOCK 2: 1720 1730 MHz (B) BLOCK 3: 1730 1735 MHz (C) BLOCK 4: 1735 1740 MHz (D) BLOCK 5: 1740 1745 MHz (E) BLOCK 6: 1745 1755 MHz (F) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 226 V 8.1 05/10/2018 3.10 BRS/EBS Frequency Block FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 226 V 8.1 05/10/2018 Radiated Power and Radiated Spurious Emissions 3.11 2.1053 22.913(a.2) 22.917(a) 24.232(c) 24.238(a) 27.50(b.10) 27.50(c.10) 27.50(d.4) 27.53(f) 27.53(g) 27.53(h) 27.53(m) The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. For measurements below 1GHz, the absorbers are removed. A raised turntable is used for radiated measurement. The turn table is a continuously rotatable, remote-controlled, metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as a ground plane. An 80cm tall test table made of Styrodur is placed on top of the turn table. A Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. Per the guidance of ANSI/TIA-603-E-2016, a half-wave dipole is then substituted in place of the EUT. For emissions above 1GHz, a horn antenna is substituted in place of the EUT. The substitute antenna is driven by a signal generator with the level of the signal generator being adjusted to obtain the same receive spectrum analyzer level previously recorded from the spurious emission from the EUT. The power of the emission is calculated using the following formula:
Pd [dBm] = Pg [dBm] cable loss [dB] + antenna gain [dBd/dBi]
Where, Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 + 10log10(Power [Watts]). For Band 7 and 41, the calculated Pd levels are compared to the absolute spurious emission limit of -25dBm which is equivalent to the required minimum attenuation of 55 + 10log10(Power [Watts]). For Band 30, the calculated Pd levels are compared to the absolute spurious emission limit of -40dBm which is equivalent to the required minimum attenuation of 70 + 10log10(Power
[Watts]). FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 226 V 8.1 05/10/2018 4 . 0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 226 V 8.1 05/10/2018 5 . 0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 5-1. Test Equipment Notes:
1. For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. 2. Equipment with a calibration date of N/A shown in this list was not used to make direct calibrated measurements. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 226 V 8.1 05/10/2018 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz CMW500 Wideband Radio Communication Tester 6/11/2018Annual6/11/2019161675Rohde & Schwarz CMW500 Wideband Radio Communication Tester 4/16/2018Annual4/16/2019161617Rohde & Schwarz CMW500 Wideband Radio Communication Tester 12/8/2017Annual12/8/2018164175Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna(400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063ESPECSU-241Temperature Chamber8/10/2018Annual8/10/201992009574 6 . 0 S A M P L E C A L C U L A T I O N S Emission Designator QPSK Modulation Emission Designator = 8M62G7W LTE BW = 8.62 MHz G = Phase Modulation 7 = Quantized/Digital Info W = Combination of Any QAM Modulation Emission Designator = 8M45W7W LTE BW = 8.45 MHz W = Amplitude/Angle Modulated 7 = Quantized/Digital Info W = Combination of Any Spurious Radiated Emission LTE Band Example: Middle Channel LTE Mode 2nd Harmonic (1564 MHz) The average spectrum analyzer reading at 3 meters with the EUT on the turntable was 81.0 dBm. The gain of the substituted antenna is 8.1 dBi. The signal generator connected to the substituted antenna terminals is adjusted to produce a reading of 81.0 dBm on the spectrum analzyer. The loss of the cable between the signal generator and the terminals of the substituted antenna is 2.0 dB at 1564 MHz. So 6.1 dB is added to the signal generator reading of 30.9 dBm yielding 24.80 dBm. The fundamental EIRP was 25.501 dBm so this harmonic was 25.501 dBm (-24.80). FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 226 V 8.1 05/10/2018 7 . 0 T E S T R E S U L T S 7.1 Summary Company Name:
Apple Inc. FCC ID:
BCG-A1975 FCC Classification:
PCS Licensed Transmitter Worn on Body (PCT) Mode(s):
FCC Part Section(s) LTE Test Description Test Limit Test Condition Test Result Reference 2.1049 Occupied Bandwidth N/A PASS Section 7.2 2.1051 2.917(a) 24.238(a) 27.53(c) 27.53(g) 27.53(h) Out of Band Emissions
> 43 + 10log10 (P[Watts]) at Band Edge and for all out-of-
band emissions 27.53(m) Out of Band Emissions 27.53(a) Out of Band Emissions Undesirable emissions must meet the limits detailed in 27.53(m) Undesirable emissions must meet the limits detailed in 27.53(a) PASS Section 7.3, 7.4 PASS Section 7.3, 7.4 PASS Section 7.3, 7.4 CONDUCTED 24.232(d) Peak-Average Ratio
< 13 dB PASS Section 7.5 2.1046 Transmitter Conducted Output Power N/A PASS Section 7.6 2.1055 22.355 24.235 27.54 Frequency Stability
< 2.5 ppm (Part 22) and fundamental emissions stay within authorized frequency block (Part 24, 27) PASS Section 7.8 Table 7-1. Summary of Conducted Test Results FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 226 V 8.1 05/10/2018 FCC Part Section(s) 22.913(a)(5) 27.50(b)(10) 27.50(c)(10) 24.232(c) 27.50(h)(2) 27.50(d)(4) 2.1053 22.917(a) 24.238(a) 27.53(c) 27.53(g) 27.53(h) Test Description Test Limit Test Test Condition Result Reference Effective Radiated Power / Equivalent Isotropic Radiated Power (Band 5, 26) Effective Radiated Power / Equivalent Isotropic Radiated Power (Band 12, 17, 13) Equivalent Isotropic Radiated Power
(Band 2, 25, 41) Equivalent Isotropic Radiated Power
(Band 4)
< 7 Watts max. ERP PASS Section 7.6
< 3 Watts max. ERP PASS Section 7.6
< 2 Watts max. EIRP PASS Section 7.6
< 1 Watts max. EIRP RADIATED PASS Section 7.6 Undesirable Emissions
> 43 + 10log10 (P[Watts]) for all out-of-band emissions PASS Section 7.7 27.53(f) Undesirable Emissions
(Band 13) 27.53(m) Undesirable Emissions
< -70 dBW/MHz (for wideband signals)
< -80 dBW (for discrete emissions less than 700Hz BW) For all emissions in the band 1559 1610 MHz Undesirable emissions must meet the limits detailed in 27.53(m) Table 7-2. Summary of Radiated Test Results PASS Section 7.7 PASS Section 7.7 Notes:
1) All modes of operation and data rates were investigated. The test results shown in the following sections represent the worst case emissions. 2) The analyzer plots (Sections 7.2, 7.3, 7.4, 7.5) were all taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables, directional couplers, and attenuators used as part of the system to maintain a link between the call box and the EUT at all frequencies of interest. 3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables, attenuators, and couplers. 4) For conducted spurious emissions, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST LTE Automation, Version 4.11. 5) For operation <1GHz, the EIRP limits in the table above are referenced to the specifications written in the relevant Radio Standards Specifications for Innovation, Science, and Economic Development Canada. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 226 V 8.1 05/10/2018 Occupied Bandwidth 7.2 Test Overview The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. All modes of operation were investigated and the worst case configuration results are reported in this section. Test Procedure Used KDB 971168 D01 v03r01 Section 4.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability was used to perform the 99%
occupied bandwidth and the 26dB bandwidth. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. RBW = 1 5% of the expected OBW 3. VBW 3 x RBW 4. Detector = Peak 5. Trace mode = max hold 6. Sweep = auto couple 7. The trace was allowed to stabilize 8. If necessary, steps 2 7 were repeated after changing the RBW such that it would be within 1 5% of the 99% occupied bandwidth observed in Step 7 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes None. FCC ID: BCG-A1975 Figure 7-1. Test Instrument & Measurement Setup MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 226 V 8.1 05/10/2018 Band 12 Plot 7-1. Occupied Bandwidth Plot (Band 12 - 1.4MHz QPSK - Full RB Configuration) Plot 7-2. Occupied Bandwidth Plot (Band 12 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 226 V 8.1 05/10/2018 Plot 7-3. Occupied Bandwidth Plot (Band 12 - 3.0MHz QPSK - Full RB Configuration) Plot 7-4. Occupied Bandwidth Plot (Band 12 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 226 V 8.1 05/10/2018 Plot 7-5. Occupied Bandwidth Plot (Band 12 - 5.0MHz QPSK - Full RB Configuration) Plot 7-6. Occupied Bandwidth Plot (Band 12 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 226 V 8.1 05/10/2018 Plot 7-7. Occupied Bandwidth Plot (Band 12 - 10.0MHz QPSK - Full RB Configuration) Plot 7-8. Occupied Bandwidth Plot (Band 12 - 10.0MHz 16-QAM RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 226 V 8.1 05/10/2018 Band 17 Plot 7-9. Occupied Bandwidth Plot (Band 17 - 5.0MHz QPSK - Full RB Configuration) Plot 7-10. Occupied Bandwidth Plot (Band 17 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 226 V 8.1 05/10/2018 Plot 7-11. Occupied Bandwidth Plot (Band 17 - 10.0MHz QPSK - Full RB Configuration) Plot 7-12. Occupied Bandwidth Plot (Band 17 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 226 V 8.1 05/10/2018 Band 13 Plot 7-13. Occupied Bandwidth Plot (Band 13 - 5.0MHz QPSK - Full RB Configuration) Plot 7-14. Occupied Bandwidth Plot (Band 13 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 226 V 8.1 05/10/2018 Plot 7-15. Occupied Bandwidth Plot (Band 13 - 10.0MHz QPSK - Full RB Configuration) Plot 7-16. Occupied Bandwidth Plot (Band 13 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 226 V 8.1 05/10/2018 Band 26 Plot 7-17. Occupied Bandwidth Plot (Band 26 - 1.4MHz QPSK - Full RB Configuration) Plot 7-18. Occupied Bandwidth Plot (Band 26 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 226 V 8.1 05/10/2018 Plot 7-19. Occupied Bandwidth Plot (Band 26 - 3.0MHz QPSK - Full RB Configuration) Plot 7-20. Occupied Bandwidth Plot (Band 26 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 226 V 8.1 05/10/2018 Plot 7-21. Occupied Bandwidth Plot (Band 26 - 5.0MHz QPSK - Full RB Configuration) Plot 7-22. Occupied Bandwidth Plot (Band 26 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 226 V 8.1 05/10/2018 Plot 7-23. Occupied Bandwidth Plot (Band 26 - 10.0MHz QPSK - Full RB Configuration) Plot 7-24. Occupied Bandwidth Plot (Band 26 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 226 V 8.1 05/10/2018 Band 5 Plot 7-25. Occupied Bandwidth Plot (Band 5 - 1.4MHz QPSK - Full RB Configuration) Plot 7-26. Occupied Bandwidth Plot (Band 5 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 226 V 8.1 05/10/2018 Plot 7-27. Occupied Bandwidth Plot (Band 5 - 3.0MHz QPSK - Full RB Configuration) Plot 7-28. Occupied Bandwidth Plot (Band 5 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 226 V 8.1 05/10/2018 Plot 7-29. Occupied Bandwidth Plot (Band 5 - 5.0MHz QPSK - Full RB Configuration) Plot 7-30. Occupied Bandwidth Plot (Band 5 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 226 V 8.1 05/10/2018 Plot 7-31. Occupied Bandwidth Plot (Band 5 - 10.0MHz QPSK - Full RB Configuration) Plot 7-32. Occupied Bandwidth Plot (Band 5 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 226 V 8.1 05/10/2018 Band 4 Plot 7-33. Occupied Bandwidth Plot (Band 4 - 1.4MHz QPSK - Full RB Configuration) Plot 7-34. Occupied Bandwidth Plot (Band 4 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 226 V 8.1 05/10/2018 Plot 7-35. Occupied Bandwidth Plot (Band 4 - 3.0MHz QPSK - Full RB Configuration) Plot 7-36. Occupied Bandwidth Plot (Band 4 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 226 V 8.1 05/10/2018 Plot 7-37. Occupied Bandwidth Plot (Band 4 - 5.0MHz QPSK - Full RB Configuration) Plot 7-38. Occupied Bandwidth Plot (Band 4 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 226 V 8.1 05/10/2018 Plot 7-39. Occupied Bandwidth Plot (Band 4 - 10.0MHz QPSK - Full RB Configuration) Plot 7-40. Occupied Bandwidth Plot (Band 4 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 226 V 8.1 05/10/2018 Plot 7-41. Occupied Bandwidth Plot (Band 4 - 15.0MHz QPSK - Full RB Configuration) Plot 7-42. Occupied Bandwidth Plot (Band 4 - 15.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 226 V 8.1 05/10/2018 Plot 7-43. Occupied Bandwidth Plot (Band 4 - 20.0MHz QPSK - Full RB Configuration) Plot 7-44. Occupied Bandwidth Plot (Band 4 - 20.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 39 of 226 V 8.1 05/10/2018 Band 25 Plot 7-45. Occupied Bandwidth Plot (Band 25 - 1.4MHz QPSK - Full RB Configuration) Plot 7-46. Occupied Bandwidth Plot (Band 25 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 40 of 226 V 8.1 05/10/2018 Plot 7-47. Occupied Bandwidth Plot (Band 25 - 3.0MHz QPSK - Full RB Configuration) Plot 7-48. Occupied Bandwidth Plot (Band 25 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 41 of 226 V 8.1 05/10/2018 Plot 7-49. Occupied Bandwidth Plot (Band 25 - 5.0MHz QPSK - Full RB Configuration) Plot 7-50. Occupied Bandwidth Plot (Band 25 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 42 of 226 V 8.1 05/10/2018 Plot 7-51. Occupied Bandwidth Plot (Band 25 - 10.0MHz QPSK - Full RB Configuration) Plot 7-52. Occupied Bandwidth Plot (Band 25 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 43 of 226 V 8.1 05/10/2018 Plot 7-53. Occupied Bandwidth Plot (Band 25 - 15.0MHz QPSK - Full RB Configuration) Plot 7-54. Occupied Bandwidth Plot (Band 25 - 15.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 44 of 226 V 8.1 05/10/2018 Plot 7-55. Occupied Bandwidth Plot (Band 25 - 20.0MHz QPSK - Full RB Configuration) Plot 7-56. Occupied Bandwidth Plot (Band 25 - 20.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 45 of 226 V 8.1 05/10/2018 Band 2 Plot 7-57. Occupied Bandwidth Plot (Band 2 - 1.4MHz QPSK - Full RB Configuration) Plot 7-58. Occupied Bandwidth Plot (Band 2 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 46 of 226 V 8.1 05/10/2018 Plot 7-59. Occupied Bandwidth Plot (Band 2 - 3.0MHz QPSK - Full RB Configuration) Plot 7-60. Occupied Bandwidth Plot (Band 2 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 47 of 226 V 8.1 05/10/2018 Plot 7-61. Occupied Bandwidth Plot (Band 2 - 5.0MHz QPSK - Full RB Configuration) Plot 7-62. Occupied Bandwidth Plot (Band 2 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 48 of 226 V 8.1 05/10/2018 Plot 7-63. Occupied Bandwidth Plot (Band 2 - 10.0MHz QPSK - Full RB Configuration) Plot 7-64. Occupied Bandwidth Plot (Band 2 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 49 of 226 V 8.1 05/10/2018 Plot 7-65. Occupied Bandwidth Plot (Band 2 - 15.0MHz QPSK - Full RB Configuration) Plot 7-66. Occupied Bandwidth Plot (Band 2 - 15.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 50 of 226 V 8.1 05/10/2018 Plot 7-67. Occupied Bandwidth Plot (Band 2 - 20.0MHz QPSK - Full RB Configuration) Plot 7-68. Occupied Bandwidth Plot (Band 2 - 20.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 51 of 226 V 8.1 05/10/2018 Band 41 Plot 7-69. Occupied Bandwidth Plot (Band 41 - 5.0MHz QPSK - Full RB Configuration) Plot 7-70. Occupied Bandwidth Plot (Band 41 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 52 of 226 V 8.1 05/10/2018 Plot 7-71. Occupied Bandwidth Plot (Band 41 - 10.0MHz QPSK - Full RB Configuration) Plot 7-72. Occupied Bandwidth Plot (Band 41 - 10.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 53 of 226 V 8.1 05/10/2018 Plot 7-73. Occupied Bandwidth Plot (Band 41 - 15.0MHz QPSK - Full RB Configuration) Plot 7-74. Occupied Bandwidth Plot (Band 41 - 15.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 54 of 226 V 8.1 05/10/2018 Plot 7-75. Occupied Bandwidth Plot (Band 41 20.0MHz QPSK - Full RB Configuration) Plot 7-76. Occupied Bandwidth Plot (Band 41 - 20.0MHz 16-QAM - RB Size 27, RB Offset 0 Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 55 of 226 V 8.1 05/10/2018 Spurious and Harmonic Emissions at Antenna Terminal 7.3 Test Overview The level of the carrier and the various conducted spurious and harmonic frequencies is measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible attenuation level of any spurious emission is 43 + log10(P[Watts]), where P is the transmitter power in Watts. For Band 41, the minimum permissible attenuation level of any spurious emission is 55 + log10(P[Watts]). Test Procedure Used KDB 971168 D01 v03r01 Section 6.0 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to at least 10 * the fundamental frequency
(separated into at least two plots per channel) 2. Detector = RMS 3. Trace mode = trace average for continuous emissions, max hold for pulse emissions 4. Sweep time = auto couple 5. The trace was allowed to stabilize 6. Please see test notes below for RBW and VBW settings Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-2. Test Instrument & Measurement Setup Test Notes Compliance with the applicable limits is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater for frequencies less than 1 GHz and 1 MHz or greater for frequencies greater than 1 GHz. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 56 of 226 V 8.1 05/10/2018 Band 12 Plot 7-77. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-78. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 57 of 226 V 8.1 05/10/2018 Plot 7-79. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-80. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 58 of 226 V 8.1 05/10/2018 Plot 7-81. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-82. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 59 of 226 V 8.1 05/10/2018 Plot 7-83. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-84. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 60 of 226 V 8.1 05/10/2018 Plot 7-85. Conducted Spurious Plot (Band 12 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 61 of 226 V 8.1 05/10/2018 Band 17 Plot 7-86. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-87. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 62 of 226 V 8.1 05/10/2018 Plot 7-88. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-89. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 63 of 226 V 8.1 05/10/2018 Plot 7-90. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-91. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 64 of 226 V 8.1 05/10/2018 Plot 7-92. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-93. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 65 of 226 V 8.1 05/10/2018 Plot 7-94. Conducted Spurious Plot (Band 17 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 66 of 226 V 8.1 05/10/2018 Band 13 Plot 7-95. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-96. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 67 of 226 V 8.1 05/10/2018 Plot 7-97. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-98. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 68 of 226 V 8.1 05/10/2018 Plot 7-99. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-100. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 69 of 226 V 8.1 05/10/2018 Plot 7-101. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-102. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 70 of 226 V 8.1 05/10/2018 Plot 7-103. Conducted Spurious Plot (Band 13 - 5.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 71 of 226 V 8.1 05/10/2018 Band 26 Plot 7-104. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-105. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 72 of 226 V 8.1 05/10/2018 Plot 7-106. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-107. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 73 of 226 V 8.1 05/10/2018 Plot 7-108. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-109. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 74 of 226 V 8.1 05/10/2018 Plot 7-110. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-111. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 75 of 226 V 8.1 05/10/2018 Plot 7-112. Conducted Spurious Plot (Band 26 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 76 of 226 V 8.1 05/10/2018 Band 5 Plot 7-113. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-114. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 77 of 226 V 8.1 05/10/2018 Plot 7-115. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-116. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 78 of 226 V 8.1 05/10/2018
1 2 3 4 | LTE Test Report 2 | Test Report | 5.33 MiB | November 09 2018 / December 09 2018 |
Plot 7-117. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-118. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 79 of 226 V 8.1 05/10/2018 Plot 7-119. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-120. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 80 of 226 V 8.1 05/10/2018 Plot 7-121. Conducted Spurious Plot (Band 5 - 10.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 81 of 226 V 8.1 05/10/2018 Band 4 Plot 7-122. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-123. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 82 of 226 V 8.1 05/10/2018 Plot 7-124. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-125. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 83 of 226 V 8.1 05/10/2018 Plot 7-126. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-127. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 84 of 226 V 8.1 05/10/2018 Plot 7-128. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-129. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 85 of 226 V 8.1 05/10/2018 Plot 7-130. Conducted Spurious Plot (Band 4 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 86 of 226 V 8.1 05/10/2018 Band 25 Plot 7-131. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-132. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 87 of 226 V 8.1 05/10/2018 Plot 7-133. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-134. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 88 of 226 V 8.1 05/10/2018 Plot 7-135. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-136. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 89 of 226 V 8.1 05/10/2018 Plot 7-137. Conducted Spurious Plot (Band 25 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-138. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 90 of 226 V 8.1 05/10/2018 Plot 7-139. Conducted Spurious Plot (Band 25 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 91 of 226 V 8.1 05/10/2018 Band 2 Plot 7-140. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-141. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 92 of 226 V 8.1 05/10/2018 Plot 7-142. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-143. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 93 of 226 V 8.1 05/10/2018 Plot 7-144. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-145. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 94 of 226 V 8.1 05/10/2018 Plot 7-146. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-147. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 95 of 226 V 8.1 05/10/2018 Plot 7-148. Conducted Spurious Plot (Band 2 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 96 of 226 V 8.1 05/10/2018 Band 41 Plot 7-149. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-150. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 97 of 226 V 8.1 05/10/2018 Plot 7-151. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Low Channel) Plot 7-152. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 98 of 226 V 8.1 05/10/2018 Plot 7-153. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) Plot 7-154. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 99 of 226 V 8.1 05/10/2018 Plot 7-155. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) Plot 7-156. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 100 of 226 V 8.1 05/10/2018 Plot 7-157. Conducted Spurious Plot (Band 41 - 20.0MHz QPSK - RB Size 1, RB Offset 0 - High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 101 of 226 V 8.1 05/10/2018 Band Edge Emissions at Antenna Terminal 7.4 Test Overview All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible attenuation level of any spurious emission is 43 + log10(P[Watts]), where P is the transmitter power in Watts. The minimum permissible attenuation level for Band 41 is as noted in the Test Notes on the following page. Test Procedure Used KDB 971168 D01 v03r01 Section 6.0 Test Settings 1. Start and stop frequency were set such that the band edge would be placed in the center of the plot 2. Span was set large enough so as to capture all out of band emissions near the band edge 3. RBW > 1% of the emission bandwidth 4. VBW > 3 x RBW 5. Detector = RMS 6. Number of sweep points 2 x Span/RBW 7. Trace mode = trace average for continuous emissions, max hold for pulse emissions 8. Sweep time = auto couple 9. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-3. Test Instrument & Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 102 of 226 V 8.1 05/10/2018 Test Notes Per 22.917(b) 24.238(a) 27.53(h) in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed to demonstrate compliance with the out-of-band emissions limit. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. Per 27.53(g) for operations in the 698-746 MHz band, in the 100 kHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least 30 kHz may be employed to demonstrate compliance with the out-of-band emissions limit. Per 27.53(c)(5) for operations in the 776-788 MHz band, in the 100 kHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least 30 kHz may be employed to demonstrate compliance with the out-of-band emissions limit. For all plots showing emissions in the 763 775MHz and 793 805MHz band, the FCC limit per 27.53(c)(4) is 65
+ 10log10(P) = -35dBm in a 6.25kHz bandwidth. Per 27.53(m) for operations in the BRS/EBS bands, the attenuation factor shall be not less than 40 + 10 log (P) dB on all frequencies between the channel edge and 5 megahertz from the channel edge, 43 + 10 log (P) dB on all frequencies between 5 megahertz and X megahertz from the channel edge, and 55 + 10 log (P) dB on all frequencies more than X megahertz from the channel edge, where X is the greater of 6 megahertz or the actual emission bandwidth. In addition, the attenuation factor shall not be less that 43 + 10 log (P) dB on all frequencies between 2490.5 MHz and 2496 MHz and 55 + 10 log (P) dB at or below 2490.5 MHz. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 103 of 226 V 8.1 05/10/2018 Band 12 Plot 7-158. Lower Band Edge Plot (Band 12 - 1.4MHz QPSK - Full RB Configuration) Plot 7-159. Upper Band Edge Plot (Band 12 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 104 of 226 V 8.1 05/10/2018 Plot 7-160. Lower Band Edge Plot (Band 12 - 3.0MHz QPSK - Full RB Configuration) Plot 7-161. Upper Band Edge Plot (Band 12 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 105 of 226 V 8.1 05/10/2018 Plot 7-162. Lower Band Edge Plot (Band 12 - 5.0MHz QPSK - Full RB Configuration) Plot 7-163. Upper Band Edge Plot (Band 12 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 106 of 226 V 8.1 05/10/2018 Plot 7-164. Lower Band Edge Plot (Band 12 - 10.0MHz QPSK - Full RB Configuration) Plot 7-165. Upper Band Edge Plot (Band 12 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 107 of 226 V 8.1 05/10/2018 Band 17 Plot 7-166. Lower Band Edge Plot (Band 17 - 5.0MHz QPSK - Full RB Configuration) Plot 7-167. Upper Band Edge Plot (Band 17 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 108 of 226 V 8.1 05/10/2018 Plot 7-168. Lower Band Edge Plot (Band 17 - 10.0MHz QPSK - Full RB Configuration) Plot 7-169. Upper Band Edge Plot (Band 17 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 109 of 226 V 8.1 05/10/2018 Band 13 Plot 7-170. Lower Band Edge Plot (Band 13 - 5.0MHz QPSK - Full RB Configuration) Plot 7-171. Lower Emission Mask Edge Plot (Band 13 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 110 of 226 V 8.1 05/10/2018 Plot 7-172. Upper Band Edge Plot (Band 13 - 5.0MHz QPSK - Full RB Configuration) Plot 7-173. Upper Emission Mask Edge Plot (Band 13 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 111 of 226 V 8.1 05/10/2018 Plot 7-174. Lower Band Edge Plot (Band 13 - 10.0MHz QPSK - Full RB Configuration) Plot 7-175. Lower Emission Mask Edge Plot (Band 13 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 112 of 226 V 8.1 05/10/2018 Plot 7-176. Upper Band Edge Plot (Band 13 - 10.0MHz QPSK - Full RB Configuration) Plot 7-177. Upper Emission Mask Edge Plot (Band 13 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 113 of 226 V 8.1 05/10/2018 Band 26 Plot 7-178. Lower Band Edge Plot (Band 26 - 1.4MHz QPSK - Full RB Configuration) Plot 7-179. Upper Band Edge Plot (Band 26 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 114 of 226 V 8.1 05/10/2018 Plot 7-180. Lower Band Edge Plot (Band 26 - 3.0MHz QPSK - Full RB Configuration) Plot 7-181. Upper Band Edge Plot (Band 26 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 115 of 226 V 8.1 05/10/2018 Plot 7-182. Lower Band Edge Plot (Band 26 - 5.0MHz QPSK - Full RB Configuration) Plot 7-183. Upper Band Edge Plot (Band 26 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 116 of 226 V 8.1 05/10/2018 Plot 7-184. Lower Band Edge Plot (Band 26 - 10.0MHz QPSK - Full RB Configuration) Plot 7-185. Upper Band Edge Plot (Band 26 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 117 of 226 V 8.1 05/10/2018 Band 5 Plot 7-186. Lower Band Edge Plot (Band 5 - 1.4MHz QPSK - Full RB Configuration) Plot 7-187. Upper Band Edge Plot (Band 5 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 118 of 226 V 8.1 05/10/2018 Plot 7-188. Lower Band Edge Plot (Band 5 - 3.0MHz QPSK - Full RB Configuration) Plot 7-189. Upper Band Edge Plot (Band 5 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 119 of 226 V 8.1 05/10/2018 Plot 7-190. Lower Band Edge Plot (Band 5 - 5.0MHz QPSK - Full RB Configuration) Plot 7-191. Upper Band Edge Plot (Band 5 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 120 of 226 V 8.1 05/10/2018 Plot 7-192. Lower Band Edge Plot (Band 5 - 10.0MHz QPSK - Full RB Configuration) Plot 7-193. Upper Band Edge Plot (Band 5 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 121 of 226 V 8.1 05/10/2018 Band 4 Plot 7-194. Lower Band Edge Plot (Band 4 - 1.4MHz QPSK - Full RB Configuration) Plot 7-195. Lower Extended Band Edge Plot (Band 4 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 122 of 226 V 8.1 05/10/2018 Plot 7-196. Upper Band Edge Plot (Band 4 - 1.4MHz QPSK - Full RB Configuration) Plot 7-197. Upper Extended Band Edge Plot (Band 4 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 123 of 226 V 8.1 05/10/2018 Plot 7-198. Lower Band Edge Plot (Band 4 - 3.0MHz QPSK - Full RB Configuration) Plot 7-199. Lower Extended Band Edge Plot (Band 4 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 124 of 226 V 8.1 05/10/2018 Plot 7-200. Upper Band Edge Plot (Band 4 - 3.0MHz QPSK - Full RB Configuration) Plot 7-201. Upper Extended Band Edge Plot (Band 4 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 125 of 226 V 8.1 05/10/2018 Plot 7-202. Lower Band Edge Plot (Band 4 - 5.0MHz QPSK - Full RB Configuration) Plot 7-203. Lower Extended Band Edge Plot (Band 4 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 126 of 226 V 8.1 05/10/2018 Plot 7-204. Upper Band Edge Plot (Band 4 - 5.0MHz QPSK - Full RB Configuration) Plot 7-205. Upper Extended Band Edge Plot (Band 4 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 127 of 226 V 8.1 05/10/2018 Plot 7-206. Lower Band Edge Plot (Band 4 - 10.0MHz QPSK - Full RB Configuration) Plot 7-207. Lower Extended Band Edge Plot (Band 4 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 128 of 226 V 8.1 05/10/2018 Plot 7-208. Upper Band Edge Plot (Band 4 - 10.0MHz QPSK - Full RB Configuration) Plot 7-209. Upper Extended Band Edge Plot (Band 4 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 129 of 226 V 8.1 05/10/2018 Plot 7-210. Lower Band Edge Plot (Band 4 - 15.0MHz QPSK - Full RB Configuration) Plot 7-211. Lower Extended Band Edge Plot (Band 4 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 130 of 226 V 8.1 05/10/2018 Plot 7-212. Upper Band Edge Plot (Band 4 - 15.0MHz QPSK - Full RB Configuration) Plot 7-213. Upper Extended Band Edge Plot (Band 4 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 131 of 226 V 8.1 05/10/2018 Plot 7-214. Lower Band Edge Plot (Band 4 - 20.0MHz QPSK - Full RB Configuration) Plot 7-215. Lower Extended Band Edge Plot (Band 4 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 132 of 226 V 8.1 05/10/2018 Plot 7-216. Upper Band Edge Plot (Band 4 - 20.0MHz QPSK - Full RB Configuration) Plot 7-217. Upper Extended Band Edge Plot (Band 4 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 133 of 226 V 8.1 05/10/2018 Band 25 Plot 7-218. Lower Band Edge Plot (Band 25 - 1.4MHz QPSK - Full RB Configuration) Plot 7-219. Lower Extended Band Edge Plot (Band 25 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 134 of 226 V 8.1 05/10/2018 Plot 7-220. Upper Band Edge Plot (Band 25 - 1.4MHz QPSK - Full RB Configuration) Plot 7-221. Upper Extended Band Edge Plot (Band 25 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 135 of 226 V 8.1 05/10/2018 Plot 7-222. Lower Band Edge Plot (Band 25 - 3.0MHz QPSK - Full RB Configuration) Plot 7-223. Lower Extended Band Edge Plot (Band 25 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 136 of 226 V 8.1 05/10/2018 Plot 7-224. Upper Band Edge Plot (Band 25 - 3.0MHz QPSK - Full RB Configuration) Plot 7-225. Upper Extended Band Edge Plot (Band 25 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 137 of 226 V 8.1 05/10/2018 Plot 7-226. Lower Band Edge Plot (Band 25 - 5.0MHz QPSK - Full RB Configuration) Plot 7-227. Lower Extended Band Edge Plot (Band 25 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 138 of 226 V 8.1 05/10/2018 Plot 7-228. Upper Band Edge Plot (Band 25 - 5.0MHz QPSK - Full RB Configuration) Plot 7-229. Upper Extended Band Edge Plot (Band 25 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 139 of 226 V 8.1 05/10/2018 Plot 7-230. Lower Band Edge Plot (Band 25 - 10.0MHz QPSK - Full RB Configuration) Plot 7-231. Lower Extended Band Edge Plot (Band 25 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 140 of 226 V 8.1 05/10/2018 Plot 7-232. Upper Band Edge Plot (Band 25 - 10.0MHz QPSK - Full RB Configuration) Plot 7-233. Upper Extended Band Edge Plot (Band 25 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 141 of 226 V 8.1 05/10/2018 Plot 7-234. Lower Band Edge Plot (Band 25 - 15.0MHz QPSK - Full RB Configuration) Plot 7-235. Lower Extended Band Edge Plot (Band 25 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 142 of 226 V 8.1 05/10/2018 Plot 7-236. Upper Band Edge Plot (Band 25 - 15.0MHz QPSK - Full RB Configuration) Plot 7-237. Upper Extended Band Edge Plot (Band 25 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 143 of 226 V 8.1 05/10/2018
1 2 3 4 | LTE Test Report 3 | Test Report | 3.67 MiB | November 09 2018 / December 09 2018 |
Plot 7-238. Lower Band Edge Plot (Band 25 - 20.0MHz QPSK - Full RB Configuration) Plot 7-239. Lower Extended Band Edge Plot (Band 25 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 144 of 226 V 8.1 05/10/2018 Plot 7-240. Upper Band Edge Plot (Band 25 - 20.0MHz QPSK - Full RB Configuration) Plot 7-241. Upper Extended Band Edge Plot (Band 25 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 145 of 226 V 8.1 05/10/2018 Band 2 Plot 7-242. Lower Band Edge Plot (Band 2 - 1.4MHz QPSK - Full RB Configuration) Plot 7-243. Lower Extended Band Edge Plot (Band 2 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 146 of 226 V 8.1 05/10/2018 Plot 7-244. Upper Band Edge Plot (Band 2 - 1.4MHz QPSK - Full RB Configuration) Plot 7-245. Upper Extended Band Edge Plot (Band 2 - 1.4MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 147 of 226 V 8.1 05/10/2018 Plot 7-246. Lower Band Edge Plot (Band 2 - 3.0MHz QPSK - Full RB Configuration) Plot 7-247. Lower Extended Band Edge Plot (Band 2 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 148 of 226 V 8.1 05/10/2018 Plot 7-248. Upper Band Edge Plot (Band 2 - 3.0MHz QPSK - Full RB Configuration) Plot 7-249. Upper Extended Band Edge Plot (Band 2 - 3.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 149 of 226 V 8.1 05/10/2018 Plot 7-250. Lower Band Edge Plot (Band 2 - 5.0MHz QPSK - Full RB Configuration) Plot 7-251. Lower Extended Band Edge Plot (Band 2 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 150 of 226 V 8.1 05/10/2018 Plot 7-252. Upper Band Edge Plot (Band 2 - 5.0MHz QPSK - Full RB Configuration) Plot 7-253. Upper Extended Band Edge Plot (Band 2 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 151 of 226 V 8.1 05/10/2018 Plot 7-254. Lower Band Edge Plot (Band 2 - 10.0MHz QPSK - Full RB Configuration) Plot 7-255. Lower Extended Band Edge Plot (Band 2 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 152 of 226 V 8.1 05/10/2018 Plot 7-256. Upper Band Edge Plot (Band 2 - 10.0MHz QPSK - Full RB Configuration) Plot 7-257. Upper Extended Band Edge Plot (Band 2 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 153 of 226 V 8.1 05/10/2018 Plot 7-258. Lower Band Edge Plot (Band 2 - 15.0MHz QPSK - Full RB Configuration) Plot 7-259. Lower Extended Band Edge Plot (Band 2 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 154 of 226 V 8.1 05/10/2018 Plot 7-260. Upper Band Edge Plot (Band 2 - 15.0MHz QPSK - Full RB Configuration) Plot 7-261. Upper Extended Band Edge Plot (Band 2 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 155 of 226 V 8.1 05/10/2018 Plot 7-262. Lower Band Edge Plot (Band 2 - 20.0MHz QPSK - Full RB Configuration) Plot 7-263. Lower Extended Band Edge Plot (Band 2 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 156 of 226 V 8.1 05/10/2018 Plot 7-264. Upper Band Edge Plot (Band 2 - 20.0MHz QPSK - Full RB Configuration) Plot 7-265. Upper Extended Band Edge Plot (Band 2 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 157 of 226 V 8.1 05/10/2018 Band 41 Plot 7-266. Lower ACP Plot (Band 41 - 5.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 Plot 7-267. Upper ACP Plot (Band 41 - 5.0MHz QPSK - Full RB Configuration) MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 158 of 226 V 8.1 05/10/2018 Plot 7-268. Lower ACP Plot (Band 41 - 10.0MHz QPSK - Full RB Configuration) Plot 7-269. Upper ACP Plot (Band 41 - 10.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 159 of 226 V 8.1 05/10/2018 Plot 7-270. Lower ACP Plot (Band 41 - 15.0MHz QPSK - Full RB Configuration) Plot 7-271. Upper ACP Plot (Band 41 - 15.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 160 of 226 V 8.1 05/10/2018 Plot 7-272. Lower ACP Plot (Band 41 - 20.0MHz QPSK - Full RB Configuration) Plot 7-273. Upper ACP Plot (Band 41 - 20.0MHz QPSK - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 161 of 226 V 8.1 05/10/2018 Peak-Average Ratio 7.5 Test Overview A peak to average ratio measurement is performed at the conducted port of the EUT. The spectrum analyzers Complementary Cumulative Distribution Function (CCDF) measurement profile is used to determine the largest deviation between the average and the peak power of the EUT in a given bandwidth. The CCDF curve shows how much time the peak waveform spends at or above a given average power level. The percent of time the signal spends at or above the level defines the probability for that particular power level. Test Procedure Used KDB 971168 D01 v03r01 Section 5.7.1 Test Settings 1. The signal analyzers CCDF measurement profile is enabled 2. Frequency = carrier center frequency 3. Measurement BW > Emission bandwidth of signal 4. The signal analyzer was set to collect one million samples to generate the CCDF curve 5. The measurement interval was set depending on the type of signal analyzed. For continuous signals
(>98% duty cycle), the measurement interval was set to 1ms. For burst transmissions, the spectrum analyzer is set to use an internal RF Burst trigger that is synced with an incoming pulse and the measurement interval is set to less than the duration of the on time of one burst to ensure that energy is only captured during a time in which the transmitter is operating at maximum power Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-4. Test Instrument & Measurement Setup Test Notes None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 162 of 226 V 8.1 05/10/2018 Band 4 Plot 7-274. PAR Plot (Band 4 - 1.4MHz QPSK - Full RB Configuration) Plot 7-275. PAR Plot (Band 4 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 163 of 226 V 8.1 05/10/2018 Plot 7-276. PAR Plot (Band 4 - 3.0MHz QPSK - Full RB Configuration) Plot 7-277. PAR Plot (Band 4 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 164 of 226 V 8.1 05/10/2018 Plot 7-278. PAR Plot (Band 4 - 5.0MHz QPSK - Full RB Configuration) Plot 7-279. PAR Plot (Band 4 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 165 of 226 V 8.1 05/10/2018 Plot 7-280. PAR Plot (Band 4 - 10.0MHz QPSK - Full RB Configuration) Plot 7-281. PAR Plot (Band 4 - 10.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 166 of 226 V 8.1 05/10/2018 Plot 7-282. PAR Plot (Band 4 - 15.0MHz QPSK - Full RB Configuration) Plot 7-283. PAR Plot (Band 4 - 15.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 167 of 226 V 8.1 05/10/2018 Plot 7-284. PAR Plot (Band 4 - 20.0MHz QPSK - Full RB Configuration) Plot 7-285. PAR Plot (Band 4 - 20.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 168 of 226 V 8.1 05/10/2018 Band 25 Plot 7-286. PAR Plot (Band 25 - 1.4MHz QPSK - Full RB Configuration) Plot 7-287. PAR Plot (Band 25 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 169 of 226 V 8.1 05/10/2018 Plot 7-288. PAR Plot (Band 25 - 3.0MHz QPSK - Full RB Configuration) Plot 7-289. PAR Plot (Band 25 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 170 of 226 V 8.1 05/10/2018 Plot 7-290. PAR Plot (Band 25 - 5.0MHz QPSK - Full RB Configuration) Plot 7-291. PAR Plot (Band 25 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 171 of 226 V 8.1 05/10/2018 Plot 7-292. PAR Plot (Band 25 - 10.0MHz QPSK - Full RB Configuration) Plot 7-293. PAR Plot (Band 25 - 10.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 172 of 226 V 8.1 05/10/2018 Plot 7-294. PAR Plot (Band 25 - 15.0MHz QPSK - Full RB Configuration) Plot 7-295. PAR Plot (Band 25 - 15.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 173 of 226 V 8.1 05/10/2018 Plot 7-296. PAR Plot (Band 25 - 20.0MHz QPSK - Full RB Configuration) Plot 7-297. PAR Plot (Band 25 - 20.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 174 of 226 V 8.1 05/10/2018 Band 2 Plot 7-298. PAR Plot (Band 2 - 1.4MHz QPSK - Full RB Configuration) Plot 7-299. PAR Plot (Band 2 - 1.4MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 175 of 226 V 8.1 05/10/2018 Plot 7-300. PAR Plot (Band 2 - 3.0MHz QPSK - Full RB Configuration) Plot 7-301. PAR Plot (Band 2 - 3.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 176 of 226 V 8.1 05/10/2018 Plot 7-302. PAR Plot (Band 2 - 5.0MHz QPSK - Full RB Configuration) Plot 7-303. PAR Plot (Band 2 - 5.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 177 of 226 V 8.1 05/10/2018 Plot 7-304. PAR Plot (Band 2 - 10.0MHz QPSK - Full RB Configuration) Plot 7-305. PAR Plot (Band 2 - 10.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 178 of 226 V 8.1 05/10/2018 Plot 7-306. PAR Plot (Band 2 - 15.0MHz QPSK - Full RB Configuration) Plot 7-307. PAR Plot (Band 2 - 15.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 179 of 226 V 8.1 05/10/2018 Plot 7-308. PAR Plot (Band 2 - 20.0MHz QPSK - Full RB Configuration) Plot 7-309. PAR Plot (Band 2 - 20.0MHz 16-QAM - Full RB Configuration) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 180 of 226 V 8.1 05/10/2018 Radiated Power (ERP/EIRP) 7.6 Test Overview Effective Radiated Power (ERP) and Equivalent Isotropic Radiated Power (EIRP) measurements are performed using the substitution method described in ANSI/TIA-603-E-2016 with the EUT transmitting into an integral antenna. Measurements on signals operating below 1GHz are performed using vertically and horizontally polarized tuned dipole antennas. Measurements on signals operating above 1GHz are performed using vertically and horizontally polarized broadband horn antennas. All measurements are performed as RMS average measurements while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. Test Procedures Used KDB 971168 D01 v03r01 Section 5.2.1 ANSI/TIA-603-E-2016 Section 2.2.17 Test Settings The relevant equation for determining the ERP or EIRP from the conducted RF output power measured is:
ERP/EIRP = PMeas LC + GT Where:
ERP/EIRP = effective or equivalen radiated power, respectively (expressed in the same units as PMeas, typically dBW or dBm) PMeas = measured transmitter output power or PSD, in dBW or dBm LC = signal attenuation in the connecting cable between the transmitter and antenna in dB GT = gain of the transmitting antenna, in dBd (ERP) or dBi (EIRP) Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. ERP/EIRP Measurement Setup FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 181 of 226 V 8.1 05/10/2018 Test Notes 1) The EUT was tested in three orthogonal planes and in all possible test configurations and positioning. The worst case emissions are reported with the EUT positioning, modulations, RB sizes and offsets, and channel bandwidth configurations shown in the tables below. 2) This unit was tested with its standard battery. 3) The Level (dBm) readings in the table were taken with a correction table loaded into the base station simulator. The correction table was used to account for the signal attenuation in the connecting cable between the transmitter and antenna. 4) The Ant. Gains (GT) are listed in dBi. Table 7-3. ERP Data (Band 12) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 182 of 226 V 8.1 05/10/2018 699.701.4QPSK1 / 525.00-29.00-6.150.000234.77-40.92707.501.4QPSK1 / 224.85-29.00-6.300.000234.77-41.07715.301.4QPSK1 / 024.76-29.00-6.390.000234.77-41.16715.301.416-QAM1 / 023.94-29.00-7.210.000234.77-41.98700.503QPSK1 / 725.00-29.00-6.150.000234.77-40.92707.503QPSK1 / 1424.73-29.00-6.420.000234.77-41.19714.503QPSK1 / 1424.98-29.00-6.170.000234.77-40.94714.50316-QAM1 / 723.95-29.00-7.200.000234.77-41.97701.505QPSK1 / 1225.00-29.00-6.150.000234.77-40.92707.505QPSK1 / 024.85-29.00-6.300.000234.77-41.07713.505QPSK1 / 1224.52-29.00-6.630.000234.77-41.40713.50516-QAM1 / 023.98-29.00-7.170.000234.77-41.94704.0010QPSK1 / 2525.00-29.00-6.150.000234.77-40.92707.5010QPSK1 / 025.00-29.00-6.150.000234.77-40.92711.0010QPSK1 / 024.96-29.00-6.190.000234.77-40.96707.501016-QAM1 / 023.83-29.00-7.320.000234.77-42.09Ant. Gain [dBi]ERP [Watts]Margin [dB]ERP Limit [dBm]ERP [dBm]Conducted Power [dBm]Mod.RB Size/OffsetFrequency [MHz]Channel Bandwidth [MHz]
Table 7-4. ERP Data (Band 17) Table 7-5. ERP Data (Band 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 183 of 226 V 8.1 05/10/2018 706.505QPSK1 / 024.98-29.30-6.470.000234.77-41.24710.005QPSK1 / 1224.67-29.30-6.780.000234.77-41.55713.505QPSK1 / 024.88-29.30-6.570.000234.77-41.34713.50516-QAM1 / 023.93-29.30-7.520.000234.77-42.29709.0010QPSK1 / 024.98-29.30-6.470.000234.77-41.24710.0010QPSK1 / 4924.75-29.30-6.700.000234.77-41.47711.0010QPSK1 / 024.67-29.30-6.780.000234.77-41.55710.001016-QAM1 / 2723.92-29.30-7.530.000234.77-42.30Ant. Gain [dBi]ERP [dBm]ERP [Watts]ERP Limit [dBm]Margin [dB]Conducted Power [dBm]Mod.RB Size/OffsetFrequency [MHz]Channel Bandwidth [MHz]779.505QPSK1 / 2425.00-29.90-7.050.000234.77-41.82782.005QPSK1 / 1225.00-29.90-7.050.000234.77-41.82784.505QPSK1 / 024.57-29.90-7.480.000234.77-42.25779.50516-QAM1 / 2424.05-29.90-8.000.000234.77-42.77782.00516-QAM1 / 023.89-29.90-8.160.000234.77-42.93784.50516-QAM1 / 024.59-29.90-7.460.000234.77-42.23782.0010QPSK1 / 024.75-29.90-7.300.000234.77-42.07782.001016-QAM1 / 2523.96-29.90-8.090.000234.77-42.86Ant. Gain [dBi]ERP Limit [dBm]ERP [Watts]ERP [dBm]RB Size/OffsetMargin [dB]Conducted Power [dBm]Frequency [MHz]Channel Bandwidth [MHz]Mod. Table 7-6. ERP Data (Band 5) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 184 of 226 V 8.1 05/10/2018 824.701.4QPSK1 / 024.53-28.40-6.020.000338.45-44.47836.501.4QPSK1 / 524.75-28.40-5.800.000338.45-44.25848.301.4QPSK1 / 024.59-28.40-5.960.000338.45-44.41824.701.416-QAM1 / 523.91-28.40-6.640.000238.45-45.09825.503QPSK1 / 724.77-28.40-5.780.000338.45-44.23836.503QPSK1 / 724.22-28.40-6.330.000238.45-44.78847.503QPSK1 / 724.20-28.40-6.350.000238.45-44.80825.50316-QAM1 / 1423.89-28.40-6.660.000238.45-45.11826.505QPSK1 / 2424.91-28.40-5.640.000338.45-44.09836.505QPSK1 / 024.30-28.40-6.250.000238.45-44.70846.505QPSK1 / 1224.29-28.40-6.260.000238.45-44.71826.50516-QAM1 / 2423.97-28.40-6.580.000238.45-45.03829.0010QPSK1 / 4924.68-28.40-5.870.000338.45-44.32836.5010QPSK1 / 025.00-28.40-5.550.000338.45-44.00844.0010QPSK1 / 2524.50-28.40-6.050.000238.45-44.50829.001016-QAM1 / 2724.07-28.40-6.480.000238.45-44.93Ant. Gain [dBi]ERP [Watts]Margin [dB]ERP Limit [dBm]Conducted Power [dBm]Frequency [MHz]Channel Bandwidth [MHz]Mod.ERP [dBm]RB Size/Offset Table 7-7. ERP Data (Band 26) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 185 of 226 V 8.1 05/10/2018 824.701.4QPSK1 / 024.75-28.40-5.800.000338.45-44.25836.501.4QPSK1 / 024.59-28.40-5.960.000338.45-44.41848.301.4QPSK1 / 524.51-28.40-6.040.000238.45-44.49836.501.416-QAM1 / 223.87-28.40-6.680.000238.45-45.13825.503QPSK1 / 024.72-28.40-5.830.000338.45-44.28836.503QPSK1 / 724.65-28.40-5.900.000338.45-44.35847.503QPSK1 / 724.75-28.40-5.800.000338.45-44.25825.50316-QAM1 / 723.94-28.40-6.610.000238.45-45.06826.505QPSK1 / 024.76-28.40-5.790.000338.45-44.24836.505QPSK1 / 024.66-28.40-5.890.000338.45-44.34846.505QPSK1 / 1224.36-28.40-6.190.000238.45-44.64836.50516-QAM1 / 1223.88-28.40-6.670.000238.45-45.12829.0010QPSK1 / 2524.75-28.40-5.800.000338.45-44.25836.5010QPSK1 / 4924.61-28.40-5.940.000338.45-44.39844.0010QPSK1 / 4924.61-28.40-5.940.000338.45-44.39829.001016-QAM1 / 023.93-28.40-6.620.000238.45-45.07831.5015QPSK1 / 024.64-28.40-5.910.000338.45-44.36836.5015QPSK1 / 3624.74-28.40-5.810.000338.45-44.26841.5015QPSK1 / 024.53-28.40-6.020.000338.45-44.47836.501516-QAM1 / 1523.72-28.40-6.830.000238.45-45.28ERP [dBm]ERP [Watts]Margin [dB]Ant. Gain [dBi]Conducted Power [dBm]RB Size/OffsetFrequency [MHz]Channel Bandwidth [MHz]Mod.ERP Limit [dBm]
Table 7-8. EIRP Data (Band 4) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 186 of 226 V 8.1 05/10/2018 1710.701.4QPSK1 / 523.26-14.408.860.00830.00-21.141732.501.4QPSK1 / 223.32-14.408.920.00830.00-21.081754.301.4QPSK1 / 523.35-14.408.950.00830.00-21.051710.701.416-QAM1 / 522.71-14.408.310.00730.00-21.691711.503QPSK1 / 1423.34-14.408.940.00830.00-21.061732.503QPSK1 / 723.31-14.408.910.00830.00-21.091753.503QPSK1 / 723.18-14.408.780.00830.00-21.221711.50316-QAM1 / 722.63-14.408.230.00730.00-21.771712.505QPSK1 / 023.38-14.408.980.00830.00-21.021732.505QPSK1 / 023.29-14.408.890.00830.00-21.111752.505QPSK1 / 2423.26-14.408.860.00830.00-21.141712.50516-QAM1 / 2422.71-14.408.310.00730.00-21.691715.0010QPSK1 / 2523.28-14.408.880.00830.00-21.121732.5010QPSK1 / 023.35-14.408.950.00830.00-21.051750.0010QPSK1 / 023.31-14.408.910.00830.00-21.091732.501016-QAM1 / 022.90-14.408.500.00730.00-21.501717.5015QPSK1 / 3623.28-14.408.880.00830.00-21.121732.5015QPSK1 / 023.38-14.408.980.00830.00-21.021747.5015QPSK1 / 023.29-14.408.890.00830.00-21.111732.501516-QAM1 / 022.81-14.408.410.00730.00-21.591720.0020QPSK1 / 9923.31-14.408.910.00830.00-21.091732.5020QPSK1 / 023.35-14.408.950.00830.00-21.051745.0020QPSK1 / 023.22-14.408.820.00830.00-21.181732.502016-QAM1 / 023.02-14.408.620.00730.00-21.38EIRP [Watts]Ant. Gain [dBi]EIRP Limit [dBm]Margin [dB]EIRP [dBm]RB Size/OffsetFrequency [MHz]Channel Bandwidth [MHz]Mod.Conducted Power [dBm]
Table 7-9. EIRP Data (Band 2) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 187 of 226 V 8.1 05/10/2018 1850.701.4QPSK1 / 223.25-14.308.950.00833.01-24.061880.001.4QPSK1 / 223.35-14.309.050.00833.01-23.961909.301.4QPSK1 / 023.35-14.309.050.00833.01-23.961850.701.416-QAM1 / 522.40-14.308.100.00633.01-24.911851.503QPSK1 / 723.27-14.308.970.00833.01-24.041880.003QPSK1 / 023.30-14.309.000.00833.01-24.011908.503QPSK1 / 023.40-14.309.100.00833.01-23.911851.50316-QAM1 / 722.41-14.308.110.00633.01-24.901852.505QPSK1 / 023.40-14.309.100.00833.01-23.911880.005QPSK1 / 023.39-14.309.090.00833.01-23.921907.505QPSK1 / 2423.21-14.308.910.00833.01-24.101852.50516-QAM1 / 022.49-14.308.190.00733.01-24.821855.0010QPSK1 / 023.39-14.309.090.00833.01-23.921880.0010QPSK1 / 023.35-14.309.050.00833.01-23.961905.0010QPSK1 / 023.25-14.308.950.00833.01-24.061855.001016-QAM1 / 2722.50-14.308.200.00733.01-24.811857.5015QPSK1 / 7423.37-14.309.070.00833.01-23.941880.0015QPSK1 / 3623.38-14.309.080.00833.01-23.931902.5015QPSK1 / 023.41-14.309.110.00833.01-23.901880.001516-QAM1 / 022.61-14.308.310.00733.01-24.701860.0020QPSK1 / 5023.18-14.308.880.00833.01-24.131880.0020QPSK1 / 023.44-14.309.140.00833.01-23.871900.0020QPSK1 / 023.21-14.308.910.00833.01-24.101860.002016-QAM1 / 2722.51-14.308.210.00733.01-24.801880.002016-QAM15 / 022.67-14.308.370.00733.01-24.641900.002016-QAM1 / 1522.54-14.308.240.00733.01-24.77EIRP [dBm]EIRP Limit [dBm]Channel Bandwidth [MHz]Mod.EIRP [Watts]Ant. Gain [dBi]RB Size/OffsetMargin [dB]Frequency [MHz]Conducted Power [dBm]
Table 7-10. EIRP Data (Band 25) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 188 of 226 V 8.1 05/10/2018 1850.701.4QPSK1 / 223.45-14.309.150.00833.01-23.861882.501.4QPSK1 / 523.47-14.309.170.00833.01-23.841914.301.4QPSK1 / 023.44-14.309.140.00833.01-23.871850.701.416-QAM1 / 022.45-14.308.150.00733.01-24.861851.503QPSK1 / 723.48-14.309.180.00833.01-23.831882.503QPSK1 / 723.46-14.309.160.00833.01-23.851913.503QPSK1 / 723.44-14.309.140.00833.01-23.871851.50316-QAM1 / 722.36-14.308.060.00633.01-24.951852.505QPSK1 / 023.50-14.309.200.00833.01-23.811882.505QPSK1 / 023.47-14.309.170.00833.01-23.841912.505QPSK1 / 1223.47-14.309.170.00833.01-23.841852.50516-QAM1 / 022.41-14.308.110.00633.01-24.901855.0010QPSK1 / 4923.50-14.309.200.00833.01-23.811882.5010QPSK1 / 023.46-14.309.160.00833.01-23.851910.0010QPSK1 / 2523.42-14.309.120.00833.01-23.891882.501016-QAM1 / 022.52-14.308.220.00733.01-24.791857.5015QPSK1 / 3623.50-14.309.200.00833.01-23.811882.5015QPSK1 / 023.46-14.309.160.00833.01-23.851907.5015QPSK1 / 3623.46-14.309.160.00833.01-23.851857.501516-QAM1 / 1522.49-14.308.190.00733.01-24.821860.0020QPSK1 / 023.50-14.309.200.00833.01-23.811882.5020QPSK1 / 023.49-14.309.190.00833.01-23.821905.0020QPSK1 / 023.50-14.309.200.00833.01-23.811860.002016-QAM1 / 022.54-14.308.240.00733.01-24.77Margin [dB]RB Size/OffsetFrequency [MHz]EIRP [Watts]Ant. Gain [dBi]EIRP [dBm]EIRP Limit [dBm]Channel Bandwidth [MHz]Mod.Conducted Power [dBm]
Table 7-11. EIRP Data (Band 41) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 189 of 226 V 8.1 05/10/2018 2498.505QPSK1 / 022.10-12.1010.000.01033.01-23.012593.005QPSK1 / 022.67-12.1010.570.01133.01-22.442687.505QPSK1 / 022.60-12.1010.500.01133.01-22.512593.00516-QAM1 / 022.20-12.1010.100.01033.01-22.912501.0010QPSK1 / 022.10-12.1010.000.01033.01-23.012593.0010QPSK1 / 022.66-12.1010.560.01133.01-22.452685.0010QPSK1 / 022.58-12.1010.480.01133.01-22.532593.001016-QAM1 / 022.24-12.1010.140.01033.01-22.872503.5015QPSK1 / 022.10-12.1010.000.01033.01-23.012593.0015QPSK1 / 022.60-12.1010.500.01133.01-22.512682.5015QPSK1 / 022.40-12.1010.300.01133.01-22.712593.001516-QAM1 / 022.25-12.1010.150.01033.01-22.862506.0020QPSK1 / 022.10-12.1010.000.01033.01-23.012593.0020QPSK1 / 022.75-12.1010.650.01233.01-22.362680.0020QPSK1 / 022.72-12.1010.620.01233.01-22.392593.002016-QAM1 / 1522.50-12.1010.400.01133.01-22.61EIRP [dBm]EIRP Limit [dBm]Frequency [MHz]EIRP [Watts]Ant. Gain [dBi]Margin [dB]RB Size/OffsetConducted Power [dBm]Channel Bandwidth [MHz]Mod. Radiated Spurious Emissions Measurements 7.7 Test Overview Radiated spurious emissions measurements are performed using the substitution method described in ANSI/TIA-
603-E-2016 with the EUT transmitting into an integral antenna. Measurements on signals operating below 1GHz are performed using vertically and horizontally polarized tuned dipole antennas. Measurements on signals operating above 1GHz are performed using vertically and horizontally polarized broadband horn antennas. Test Procedures Used KDB 971168 D01 v03r01 Section 5.8 ANSI/TIA-603-E-2016 Section 2.2.12 Test Settings 1. RBW = 100kHz for emissions below 1GHz and 1MHz for emissions above 1GHz 2. VBW 3 x RBW 3. Span = 1.5 times the OBW 4. No. of sweep points > 2 x span / RBW 5. Detector = RMS 6. Trace mode = Average (Max Hold for pulsed emissions) 7. The trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 190 of 226 V 8.1 05/10/2018 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-6. Test Instrument & Measurement Setup 1) The EUT was tested in three orthogonal planes and in all possible test configurations and positioning. The worst case emissions are reported with the EUT positioning, modulations, RB sizes and offsets, and channel bandwidth configurations shown in the tables below. 2) This unit was tested with its standard battery. 3) The spectrum is measured from 9kHz to the 10th harmonic of the fundamental frequency of the transmitter. The worst-case emissions are reported. 4) Emissions below 18GHz were measured at a 3 meter test distance while emissions above 18GHz were measured at a 1 meter test distance with the application of a distance correction factor. 5) The "-" shown in the following RSE tables are used to denote a noise floor measurement. Test Notes FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 191 of 226 V 8.1 05/10/2018 Band 12 Table 7-12. Radiated Spurious Data (Band 12 Low Channel) Table 7-13. Radiated Spurious Data (Band 12 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 192 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 704.00MHzCHANNEL: 23060MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1408.00V122338-42.514.77-37.73-24.72112.00V121365-40.684.91-35.77-22.82816.00V - --40.626.59-34.03-21.03520.00V - --43.387.68-35.70-22.74224.00V - --43.808.40-35.40-22.4Antenna Height [cm]Ant. Pol. [H/V]Frequency [MHz]Turntable Azimuth [degree]Margin [dB]Spurious Emission Level [dBm]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]OPERATING FREQUENCY: 707.50MHzCHANNEL: 23095MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1415.00V191348-41.584.84-36.75-23.72122.50V174288-37.654.92-32.73-19.72830.00V - --41.486.61-34.87-21.93537.50V - --42.667.68-34.98-22.04245.00V - --43.698.41-35.28-22.3Ant. Pol. [H/V]Frequency [MHz]Turntable Azimuth [degree]Antenna Height [cm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Level at Antenna Terminals [dBm]Margin [dB]
Table 7-14. Radiated Spurious Data (Band 12 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 193 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 711.00MHzCHANNEL: 23130MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1422.00X - --42.634.90-37.73-24.72133.00X - --38.684.94-33.74-20.72844.00X - --39.536.63-32.89-19.9Spurious Emission Level [dBm]Margin [dB]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Frequency [MHz]Antenna Height [cm]Turntable Azimuth [degree]Ant. Pol. [H/V]
Band 17 Table 7-15. Radiated Spurious Data (Band 17 Low Channel) Table 7-16. Radiated Spurious Data (Band 17 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 194 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 709.00MHzCHANNEL: 23780MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1418.00V179306-41.754.86-36.88-23.92127.00V170299-36.314.93-31.38-18.42836.00V - --40.696.62-34.07-21.13545.00V - --42.127.68-34.44-21.44254.00V - --42.648.42-34.22-21.2Margin [dB]Frequency [MHz]Level at Antenna Terminals [dBm]Antenna Height [cm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Turntable Azimuth [degree]Ant. Pol. [H/V]OPERATING FREQUENCY: 710.00MHzCHANNEL: 23790MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1420.00V195171-41.914.88-37.03-24.02130.00V102266-37.244.93-32.31-19.32840.00V - --40.656.62-34.03-21.03550.00V - --42.037.68-34.35-21.34260.00V - --42.868.42-34.44-21.4Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Turntable Azimuth [degree]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Margin [dB]Level at Antenna Terminals [dBm]Table 7-17. Radiated Spurious Data (Band 17 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 195 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 711.00MHzCHANNEL: 23800MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1422.00V268102-42.494.90-37.59-24.62133.00V134312-36.754.94-31.81-18.82844.00V - --40.876.63-34.23-21.23555.00V - --42.017.66-34.35-21.34266.00V - --42.758.43-34.32-21.3Frequency [MHz]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Ant. Pol. [H/V]Antenna Height [cm]Margin [dB]Turntable Azimuth [degree]
Band 13 Table 7-18. Radiated Spurious Data (Band 13 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 196 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 782.00MHzCHANNEL: 23230MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm2346.00V150200-67.015.47-61.54-48.53128.00V - --68.706.67-62.03-49.03910.00V - --69.377.75-61.63-48.6Margin [dB]Spurious Emission Level [dBm]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Frequency [MHz]
Band 5 Table 7-19. Radiated Spurious Data (Band 5 Low Channel) Table 7-20. Radiated Spurious Data (Band 5 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 197 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 829.00MHzCHANNEL: 20450MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1658.00V - --71.985.27-66.71-53.72487.00V125220-64.725.42-59.29-46.33316.00V - --69.687.21-62.47-49.5Frequency [MHz]Turntable Azimuth [degree]Antenna Height [cm]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]Ant. Pol. [H/V]OPERATING FREQUENCY: 836.50MHzCHANNEL: 20525MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1673.00V---71.325.16-66.16-53.22509.50V150264-63.765.39-58.37-45.43346.00V---69.907.31-62.59-49.64182.50V---70.098.40-61.69-48.75019.00V---70.209.79-60.41-47.4Level at Antenna Terminals [dBm]Spurious Emission Level [dBm]Turntable Azimuth [degree]Margin [dB]Substitute Antenna Gain [dBi]Frequency [MHz]Antenna Height [cm]Ant. Pol. [H/V]
Table 7-21. Radiated Spurious Data (Band 5 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 198 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 844.00MHzCHANNEL: 20600MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1688.00V - --71.475.05-66.41-53.42532.00V - --70.015.36-64.66-51.73376.00V - --69.727.40-62.33-49.3Spurious Emission Level [dBm]Margin [dB]Substitute Antenna Gain [dBi]Level at Antenna Terminals [dBm]Frequency [MHz]Turntable Azimuth [degree]Antenna Height [cm]Ant. Pol. [H/V]
Band 26 Table 7-22. Radiated Spurious Data (Band 26 Low Channel) Table 7-23. Radiated Spurious Data (Band 26 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 199 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 819.00MHzCHANNEL: 26740MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1638.00V - --64.495.36-59.13-46.12457.00V - --59.315.46-53.85-40.93276.00V - --60.667.10-53.56-40.6Substitute Antenna Gain [dBi]Ant. Pol. [H/V]Spurious Emission Level [dBm]Turntable Azimuth [degree]Antenna Height [cm]Margin [dB]Frequency [MHz]Level at Antenna Terminals [dBm]OPERATING FREQUENCY: 831.50MHzCHANNEL: 26865MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1663.00V---71.965.23-66.73-53.72494.50V---65.315.41-59.90-46.93326.00V---70.347.24-63.09-50.1Margin [dB]Frequency [MHz]Ant. Pol. [H/V]Spurious Emission Level [dBm]Turntable Azimuth [degree]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Antenna Height [cm]
Table 7-24. Radiated Spurious Data (Band 26 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 200 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 841.50MHzCHANNEL: 26990MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13dBm1683.00V - --70.755.05-65.69-52.72524.50V138251-61.955.36-56.60-43.63366.00V - --69.797.40-62.40-49.44207.50V - --70.218.40-61.81-48.85049.00V---70.159.82-60.33-47.3Margin [dB]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Ant. Pol. [H/V]Frequency [MHz]Turntable Azimuth [degree]Antenna Height [cm]Level at Antenna Terminals [dBm]
Band 4 Table 7-25. Radiated Spurious Data (Band 4 Low Channel) Table 7-26. Radiated Spurious Data (Band 4 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 201 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3440.00V - --42.987.57-35.41-22.45160.00V100300-43.259.78-33.47-20.56880.00V - --44.1911.00-33.19-20.28600.00V - --45.2212.50-32.72-19.710320.00V - --36.7612.22-24.54-11.51720.0020050Level at Antenna Terminals [dBm]Margin [dB]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3465.00V129172-41.087.62-33.46-20.55197.50V106193-43.959.75-34.20-21.26930.00V - --37.2211.05-26.18-13.28662.50V - --38.8412.48-26.36-13.410395.00V - --37.1712.23-24.94-11.91732.5020175Spurious Emission Level [dBm]Margin [dB]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
Table 7-27. Radiated Spurious Data (Band 4 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 202 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3490.00V - --41.987.66-34.32-21.35235.00V100300-41.939.74-32.20-19.26980.00V - --44.9511.07-33.87-20.98725.00V - --44.0612.46-31.60-18.610470.00V106368-36.7312.25-24.48-11.51745.0020300Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]
Band 2 Table 7-28. Radiated Spurious Data (Band 2 Low Channel) Table 7-29. Radiated Spurious Data (Band 2 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 203 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3720.00V120120-39.737.09-32.64-19.65580.00V180180-35.4010.06-25.33-12.37440.00V - --45.1911.63-33.57-20.69300.00V - --44.8912.44-32.46-19.51860.0018700Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3760.00V - --41.027.10-33.92-20.95640.00V - --44.4810.04-34.43-21.47520.00V - --44.7911.68-33.11-20.11880.0018900Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
Table 7-30. Radiated Spurious Data (Band 2 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 204 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 1900.00MHzCHANNEL: 19100MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3800.00V350360-40.977.21-33.76-20.85700.00V - --44.4210.05-34.36-21.47600.00V - --45.1111.72-33.39-20.4Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]
Band 25 Table 7-31. Radiated Spurious Data (Band 25 Low Channel) Table 7-32. Radiated Spurious Data (Band 25 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 205 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3720.00H - --41.227.09-34.13-21.15580.00H - --43.7010.06-33.63-20.67440.00H - --43.7611.63-32.14-19.11860.0026140Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3765.00Y130181-38.577.12-31.45-18.55647.50Y - --45.2710.04-35.23-22.27530.00Y - --36.9011.68-25.22-12.29412.50Y29210-43.7412.35-31.39-18.411295.00Y - --42.1912.52-29.68-16.713177.50Y - --41.0513.21-27.84-14.815060.00Y - --39.2212.40-26.82-13.81882.5026365Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]
Table 7-33. Radiated Spurious Data (Band 25 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 206 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -13dBm3810.00H - --41.487.26-34.22-21.25715.00H - --43.9010.05-33.85-20.97620.00H - --43.5311.74-31.79-18.81905.0026590Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Margin [dB]
Band 41 Table 7-34. Radiated Spurious Data (Band 41 Low Channel) Table 7-35. Radiated Spurious Data (Band 41 Mid Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 207 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 2506.00MHzCHANNEL: 39790MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -25dBm5012.00H329474.02-65.349.78-55.56-30.67518.00H1062734.02-67.4611.68-55.78-30.810024.00H--4.02-66.6412.21-54.43-29.412530.00H--4.02-63.7612.62-51.14-26.115036.00H--4.02-60.9512.43-48.52-23.517542.00H--4.02-57.2311.92-45.31-20.3Substitute Antenna Gain [dBi]Level at Antenna Terminals [dBm]Frequency [MHz]Spurious Emission Level [dBm]Antenna Height [cm]Turntable Azimuth [degree]Ant. Pol. [H/V]Duty Cycle Correction Factor [dB]Margin [dB]OPERATING FREQUENCY: 2593.00MHzCHANNEL: 40620MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -25dBm5186.00H325154.02-69.039.76-59.27-34.37779.00V2763234.02-67.8911.87-56.02-31.010372.00H3131364.02-64.6812.23-52.45-27.512965.00H--4.02-63.3512.89-50.46-25.515558.00H--4.02-60.4112.58-47.83-22.8Margin [dB]Duty Cycle Correction Factor [dB]Antenna Height [cm]Ant. Pol. [H/V]Frequency [MHz]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Turntable Azimuth [degree]
Table 7-36. Radiated Spurious Data (Band 41 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 208 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 2680.00MHzCHANNEL: 41490MODULATION SIGNAL: QPSKBANDWIDTH: 20.0MHzDISTANCE: 3metersLIMIT: -25dBm5360.00H--4.02-70.189.86-60.32-35.38040.00H106124.02-66.7412.09-54.65-29.610720.00H--4.02-64.7412.29-52.45-27.413400.00H--4.02-63.4913.34-50.15-25.116080.00H--4.02-60.0612.44-47.62-22.6Margin [dB]Duty Cycle Correction Factor [dB]Antenna Height [cm]Ant. Pol. [H/V]Frequency [MHz]Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Spurious Emission Level [dBm]Turntable Azimuth [degree]
Frequency Stability / Temperature Variation 7.8 Test Overview and Limit Frequency stability testing is performed in accordance with the guidelines of ANSI/TIA-603-E-2016. The frequency stability of the transmitter is measured by:
a.) Temperature: The temperature is varied from -30C to +50C in 10C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. For Part 22, the frequency stability of the transmitter shall be maintained within 0.00025% (2.5 ppm) of the center frequency. For Part 24, Part 27, the frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. Test Procedure Used ANSI/TIA-603-E-2016 Test Settings 1. The carrier frequency of the transmitter is measured at room temperature (20C to provide a reference). 2. The equipment is turned on in a standby condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10C intervals ranging from -30C to +50C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Test Setup The EUT was connected via an RF cable to a spectrum analyzer with the EUT placed inside an environmental chamber. Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 209 of 226 V 8.1 05/10/2018 Band 12 Frequency Stability Measurements Table 7-37. Frequency Stability Data (Band 12) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 210 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 707,500,000HzCHANNEL: 23,790REFERENCE VOLTAGE: VDC100 % + 20707,500,00440.0000006100 %- 30707,500,00440.0000006100 %- 20707,500,00660.0000009100 %- 10707,500,00550.0000008100 %3.80 0707,500,00660.0000008100 %+ 10707,500,00440.0000005100 %+ 20707,500,00440.0000005100 % + 30707,500,00550.0000006100 %+ 40707,499,994-6-0.0000008100 %+ 50707,500,00550.0000007BATT. ENDPOINT3.40+ 20707,500,00440.0000006Deviation (%)Freq. Dev. (Hz)TEMP (oC)FREQUENCY (Hz)3.80VOLTAGE (%)POWER (VDC) Band 12 Frequency Stability Measurements Figure 7-7. Frequency Stability Graph (Band 12) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 211 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 17 Frequency Stability Measurements Table 7-38. Frequency Stability Data (Band 17) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 212 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 710,000,000HzCHANNEL: 23,090REFERENCE VOLTAGE: VDC100 % + 20710,000,00550.0000006100 %- 30710,000,00550.0000007100 %- 20710,000,00550.0000007100 %- 10710,000,00440.0000006100 %3.80 0710,000,00440.0000006100 %+ 10710,000,00550.0000007100 %+ 20710,000,00550.0000007100 % + 30710,000,00550.0000008100 %+ 40710,000,00440.0000006100 %+ 50710,000,00440.0000006BATT. ENDPOINT3.40+ 20710,000,00550.00000073.80Deviation (%)POWER (VDC)TEMP (oC)FREQUENCY (Hz)Freq. Dev. (Hz)VOLTAGE (%) Band 17 Frequency Stability Measurements Figure 7-8. Frequency Stability Graph (Band 17) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 213 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 13 Frequency Stability Measurements Table 7-39. Frequency Stability Data (Band 13) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 214 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 782,000,000HzCHANNEL: 23230REFERENCE VOLTAGE: VDC100 % + 20782,000,00440.0000005100 %- 30782,000,00550.0000007100 %- 20782,000,00550.0000007100 %- 10782,000,00550.0000007100 %3.80 0782,000,00660.0000007100 %+ 10782,000,00550.0000006100 %+ 20782,000,00660.0000007100 % + 30782,000,00440.0000005100 %+ 40782,000,00660.0000008100 %+ 50782,000,00660.0000008BATT. ENDPOINT3.40+ 20782,000,00440.0000005TEMP (oC)FREQUENCY (Hz)VOLTAGE (%)Deviation (%)POWER (VDC)3.80Freq. Dev. (Hz) Band 13 Frequency Stability Measurements Figure 7-9. Frequency Stability Graph (Band 13) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 215 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 5/26 Frequency Stability Measurements Table 7-40. Frequency Stability Data (Band 5/26) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 216 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 836,500,000HzCHANNEL: 20525REFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.00025% or 2.5 ppm100 % + 20836,500,00440.0000005100 %- 30836,500,00440.0000005100 %- 20836,500,00550.0000006100 %- 10836,499,995-5-0.0000006100 %3.80 0836,500,00440.0000005100 %+ 10836,500,00440.0000005100 %+ 20836,500,00440.0000005100 % + 30836,500,00660.0000007100 %+ 40836,500,00660.0000007100 %+ 50836,500,00550.0000006BATT. ENDPOINT3.40+ 20836,500,00550.0000006POWER (VDC)TEMP (oC)FREQUENCY (Hz)Freq. Dev. (Hz)VOLTAGE (%)3.80Deviation (%) Band 5/26 Frequency Stability Measurements Figure 7-10. Frequency Stability Graph (Band 5/26) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 217 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 4 Frequency Stability Measurements Table 7-41. Frequency Stability Data (Band 4) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 218 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 1,732,500,000HzCHANNEL: 20175REFERENCE VOLTAGE: VDC100 % + 201,732,500,011110.0000006100 %- 301,732,500,00880.0000004100 %- 201,732,500,00880.0000005100 %- 101,732,500,00770.0000004100 %3.80 01,732,499,992-8-0.0000005100 %+ 101,732,500,00880.0000005100 %+ 201,732,500,014140.0000008100 % + 301,732,500,017170.0000010100 %+ 401,732,500,021210.0000012100 %+ 501,732,500,018180.0000010BATT. ENDPOINT3.40+ 201,732,500,011110.0000006Deviation (%)FREQUENCY (Hz)TEMP (oC)Freq. Dev. (Hz)3.80VOLTAGE (%)POWER (VDC) Band 4 Frequency Stability Measurements Figure 7-11. Frequency Stability Graph (Band 4) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 219 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 2 Frequency Stability Measurements Table 7-42. Frequency Stability Data (Band 2) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 220 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 1,880,000,000HzCHANNEL: 18900REFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.00025% or 2.5 ppm100 % + 201,880,000,013130.0000007100 %- 301,880,000,00770.0000004100 %- 201,880,000,00990.0000005100 %- 101,879,999,992-8-0.0000004100 %3.80 01,880,000,00770.0000004100 %+ 101,880,000,00660.0000003100 %+ 201,880,000,021210.0000011100 % + 301,880,000,019190.0000010100 %+ 401,880,000,018180.0000010100 %+ 501,880,000,022220.0000011BATT. ENDPOINT3.40+ 201,880,000,014140.0000008Freq. Dev. (Hz)Deviation (%)VOLTAGE (%)POWER (VDC)TEMP (oC)FREQUENCY (Hz)3.80 Band 2 Frequency Stability Measurements Figure 7-12. Frequency Stability Graph (Band 2) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 221 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 25 Frequency Stability Measurements Table 7-43. Frequency Stability Data (Band 25) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 222 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 1,882,500,000HzCHANNEL: 26365REFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.00025% or 2.5 ppm100 % + 201,882,500,017170.0000009100 %- 301,882,500,00990.0000005100 %- 201,882,500,010100.0000005100 %- 101,882,499,994-6-0.0000003100 %3.80 01,882,500,00990.0000005100 %+ 101,882,500,00880.0000004100 %+ 201,882,500,019190.0000010100 % + 301,882,500,019190.0000010100 %+ 401,882,500,025250.0000013100 %+ 501,882,500,023230.0000012BATT. ENDPOINT3.40+ 201,882,500,016160.0000009TEMP (oC)FREQUENCY (Hz)VOLTAGE (%)POWER (VDC)Freq. Dev. (Hz)Deviation (%)3.80 Band 25 Frequency Stability Measurements Figure 7-13. Frequency Stability Graph (Band 25) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 223 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability Band 41 Frequency Stability Measurements Table 7-44. Frequency Stability Data (Band 41) Note:
Based on the results of the frequency stability test at the center channel the frequency deviation results measured are very small. As such it is determined that the channels at the band edge would remain in-band when the maximum measured frequency deviation noted during the frequency stability tests is applied. Therefore the device is determined to remain operating in band over the temperature and voltage range as tested. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 224 of 226 V 8.1 05/10/2018 OPERATING FREQUENCY: 2,593,000,000HzCHANNEL: 40620REFERENCE VOLTAGE: VDC100 % + 202,593,000,036360.0000014100 %- 302,593,000,033330.0000013100 %- 202,593,000,023230.0000009100 %- 102,593,000,034340.0000013100 %3.80 02,593,000,029290.0000011100 %+ 102,593,000,030300.0000012100 %+ 202,593,000,033330.0000013100 % + 302,593,000,035350.0000013100 %+ 402,593,000,030300.0000012100 %+ 502,593,000,031310.0000012BATT. ENDPOINT3.40+ 202,593,000,036360.0000014Deviation (%)3.80POWER (VDC)Freq. Dev. (Hz)TEMP (oC)FREQUENCY (Hz)VOLTAGE (%) Band 41 Frequency Stability Measurements Figure 7-14. Frequency Stability Graph (Band 41) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 225 of 226 V 8.1 05/10/2018
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability 8 . 0 C O N C L U S I O N The data collected relate only to the item(s) tested and show that the Apple Watch FCC ID: BCG-A1975 complies with all the requirements of Part 22, 24, & 27 of the FCC Rules for LTE operation only. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-03-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 226 of 226 V 8.1 05/10/2018
1 2 3 4 | Part 90 Test Report | Test Report | 1.34 MiB | November 09 2018 / December 09 2018 |
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC Part 90 Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-04-R1.BCG BCG-A1975 Apple Inc. Certification A1975 Watch PCS Licensed Transmitter Worn on Body (PCT) 2.1049, 90.691 ANSI C63.26-2015, ANSI/TIA-603-E-2016-E-2016, KDB 971168 D01 Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
APPLICANT:
Application Type:
Model:
EUT Type:
FCC Classification:
FCC Rule Part:
Test Procedure(s):
v03r01 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in 2.947. Test results reported herein relate only to the item(s) tested. This revised Test Report (S/N: 1C1806040008-04-R1.BCG) supersedes and replaces the previously issued test report (S/N:
1C1806040008-04.BCG) on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 38 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 T A B L E O F C O N T E N T S INTRODUCTION ........................................................................................................................................... 4 Scope ................................................................................................................................................................. 4 1.1 1.2 PCTEST Test Location ....................................................................................................................................... 4 1.3 Test Facility / Accreditations ............................................................................................................................... 4 PRODUCT INFORMATION ........................................................................................................................... 5 Equipment Description ....................................................................................................................................... 5 2.1 2.2 Device Capabilities ............................................................................................................................................. 5 2.3 Antenna Description ........................................................................................................................................... 5 Following antenna was used for the testing. ................................................................................................................. 5 Table 2 1. Antenna Peak Gain ....................................................................................................................................... 5 Test Support Equipment ..................................................................................................................................... 5 2.4 Test Configuration .............................................................................................................................................. 6 2.5 2.6 Software and Firmware ...................................................................................................................................... 6 2.7 EMI Suppression Device(s)/Modifications .......................................................................................................... 6 DESCRIPTION OF TESTS ........................................................................................................................... 7 3.1 Evaluation Procedure ......................................................................................................................................... 7 3.2 Radiated Power and Radiated Spurious Emissions ........................................................................................... 7 MEASUREMENT UNCERTAINTY ................................................................................................................ 8 TEST EQUIPMENT CALIBRATION DATA ................................................................................................... 9 SAMPLE CALCULATIONS ......................................................................................................................... 10 TEST RESULTS .......................................................................................................................................... 11 7.1 Summary .......................................................................................................................................................... 11 Occupied Bandwidth ........................................................................................................................................ 12 7.2 Spurious and Harmonic Emissions at Antenna Terminal ................................................................................. 21 7.3 Band Edge Emissions at Antenna Terminal ..................................................................................................... 25 7.4 7.5 Conducted Power Output Data ........................................................................................................................ 30 Radiated Spurious Emissions Measurements .................................................................................................. 32 7.6 7.7 Frequency Stability / Temperature Variation .................................................................................................... 35 CONCLUSION ............................................................................................................................................. 38 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 38 MEASUREMENT REPORT FCC Part 90 EUT Overview FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 38 ModeTx Frequency (MHz)MeasurementMax. Power (W)Max. Power (dBm)Emission DesignatorModulationLTE Band 26814.7 - 823.3Conducted0.29924.751M08G7WQPSKLTE Band 26814.7 - 823.3Conducted0.24223.841M09D7W16-QAMLTE Band 26815.5 - 822.5Conducted0.29624.722M71G7WQPSKLTE Band 26815.5 - 822.5Conducted0.24823.942M71D7W16-QAMLTE Band 26816.5 - 821.5Conducted0.29924.764M50G7WQPSKLTE Band 26816.5 - 821.5Conducted0.24423.884M51D7W16-QAMLTE Band 26819Conducted0.29924.759M03G7WQPSKLTE Band 26819Conducted0.24723.935M16D7W16-QAM 1 . 0 I N T R O D U C T I O N Scope PCTEST Test Location 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. 1.2 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01r01 . 1.3 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 38 2 . 0 P R O D U C T I N F O R M A T I O N Device Capabilities Equipment Description 2.1 The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The test data contained in this report pertains only to the emissions due to the EUTs licensed transmitters that operate under the provisions of Part 90.691. Test Device Serial No.: C89WP003K473, D92WW00XKK89 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC 2.3 Antenna Description Following antenna was used for the testing. Frequency [MHz]
814 - 824 Antenna Gain
(dBi)
-28.3 Table 2 1. Antenna Peak Gain 2.4 Test Support Equipment Table 2-1. Test Support Equipment Used FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 38 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A Test Configuration 2.5 The EUT was tested per the guidance of ANSI/TIA-603-E-2016-E-2016 and KDB 971168 D01 v03r01. See Section 7 of this test report for a description of the radiated and antenna port conducted emissions tests. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel, and various types of wristbands, metal and non-metal wristbands. . The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz and above 18GHz were tested with the highest transmitting power channel and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. 16-QAM Modulation uplink is only supported for RBs of 27 or less. Software and Firmware 2.6 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.7 No EMI suppression device(s) were added and no modifications were made during testing. EMI Suppression Device(s)/Modifications FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 38 3 . 0 D E S C R I P T I O N O F T E S T S Evaluation Procedure Radiated Power and Radiated Spurious Emissions 3.1 The measurement procedures described in the document titled Land Mobile FM or PM Communications Equipment Measurements and Performance Standards (ANSI/TIA-603-E-2016-D-2010) and Procedures for Compliance Measurement of the Fundamental Emission Power of Licensed Wideband (> 1 MHz) Digital Transmission Systems (KDB 971168 D01 v03r01) were used in the measurement of the EUT. 3.2 2.1053, 90.635, 90.691 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. For measurements below 1GHz, the absorbers are removed. A raised turntable is used for radiated measurement. The turn table is a continuously rotatable, remote-controlled, metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as a ground plane. An 80cm tall test table made of Styrodur is placed on top of the turn table. A Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. Per the guidance of ANSI/TIA-603-E-2016-E-2016, a half-wave dipole is then substituted in place of the EUT. For emissions above 1GHz, a horn antenna is substituted in place of the EUT. The substitute antenna is driven by a signal generator with the level of the signal generator being adjusted to obtain the same receive spectrum analyzer level previously recorded from the spurious emission from the EUT. The power of the emission is calculated using the following formula:
Pd [dBm] = Pg [dBm] cable loss [dB] + antenna gain [dBd/dBi]
Where, Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic source (dBi). The substitute level is equal to Pg [dBm] cable loss [dB]. The calculated Pd levels are then compared to the absolute spurious emission limit of -13dBm which is equivalent to the required minimum attenuation of 43 +
10log10(Power [Watts]). Radiated spurious emission levels are investigated with the receive antenna horizontally and vertically polarized per ANSI/TIA-603-E-2016-E-2016. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 38 4 . 0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Conducted Bench Top Measurements Radiated Disturbance (<1GHz) Radiated Disturbance (>1GHz) Radiated Disturbance (>18GHz) 1.13 4.98 5.07 5.09 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 38 5 . 0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 5-1. Test Equipment Notes:
1. For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. 2. Equipment with a calibration date of N/A shown in this list was not used to make direct calibrated measurements. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 38 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver12/20/2017Annual12/20/2018101668Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & SchwarzFSV40Signal Analyzer (10Hz-40GHz)2/6/2018Annual2/6/2019101619Rohde & Schwarz CMW500 Wideband Radio Communication Tester 6/11/2018Annual6/11/2019161675Rohde & Schwarz CMW500 Wideband Radio Communication Tester 4/16/2018Annual4/16/2019161617Rohde & Schwarz CMW500 Wideband Radio Communication Tester 12/8/2017Annual12/8/2018164175Rohde & Schwarz SFUNIT-RXShielded Filter Unit9/11/2017Annual9/11/2018102132Rohde & Schwarz SFUNIT-RXShielded Filter Unit12/11/2017Annual12/11/2018102136Rohde & Schwarz TS-PR1840Pre-Amplifier (18GHz - 40GHz)6/11/2018Annual 6/11/2019100051Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333ATM180-442A-KF20dB Nominal Gain Horn Antenna3/13/2018Annual3/13/2019T058601-02Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna(400MHz-18GHz)11/13/2017Annual11/13/2018101057Rohde & Schwarz TC-TA18Cross Polarized Vivaldi Antenna (400MHz-18GHz)11/29/2017Annual11/29/2018101063ESPECSU-241Temperature Chamber8/10/2018Annual8/10/201992009574 6 . 0 S A M P L E C A L C U L A T I O N S Emission Designator QPSK Modulation Emission Designator = 8M62G7W LTE BW = 8.62 MHz G = Phase Modulation 7 = Quantized/Digital Info W = Combination of Any 16QAM Modulation Emission Designator = 8M45W7W LTE BW = 8.45 MHz W = Amplitude/Angle Modulated 7 = Quantized/Digital Info W = Combination of Any Spurious Radiated Emission LTE Band Example: Middle Channel LTE Mode 2nd Harmonic (1564 MHz) The average spectrum analyzer reading at 3 meters with the EUT on the turntable was 81.0 dBm. The gain of the substituted antenna is 8.1 dBi. The signal generator connected to the substituted antenna terminals is adjusted to produce a reading of 81.0 dBm on the spectrum analzyer. The loss of the cable between the signal generator and the terminals of the substituted antenna is 2.0 dB at 1564 MHz. So 6.1 dB is added to the signal generator reading of 30.9 dBm yielding 24.80 dBm. The fundamental EIRP was 25.501 dBm so this harmonic was 25.501 dBm (-24.80). FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 38 7 . 0 T E S T R E S U L T S 7.1 Summary Company Name:
Apple Inc. FCC ID:
BCG-A1975 FCC Classification:
PCS Licensed Transmitter Held to Ear (PCE) Mode(s):
Band:
FCC Part Section(s) LTE Band 26 Test Description Test Limit Test Test Condition Result Reference 2.1049 Occupied Bandwidth N/A PASS Section 7.2 2.1051 90.691 Conducted Band Edge /
Spurious Emissions
> 43 + log10 (P[Watts]) for all out-
of-band emissions except
> 50 + 10log10 (P[Watts]) at Band Edge and for all out-of-
band emissions within 37.5kHz of Block Edge PASS Sections 7.3, 7.4 2.1055 90.213 2.1046 90.635 2.1053 90.691 Frequency Stability
< 2.5 ppm CONDUCTED PASS Section 7.7 Conducted Power
< 100 Watts PASS Section 7.5 Radiated Spurious Emissions
> 43 + log10 (P[Watts]) for all out-
of-band emissions except
> 50 + 10log10 (P[Watts]) at Band Edge and for all out-of-
band emissions within 37.5kHz of Block Edge Table 7-1. Summary of Test Results PASS Section 7.6 Notes:
1) All modes of operation and data rates were investigated. The test results shown in the following sections represent the worst case emissions. 2) The analyzer plots shown in Section 7.0 were taken with a correction table loaded into the analyzer. The correction table was used to account for the losses of the cables, directional couplers, and attenuators used as part of the system to maintain a link between the call box and the EUT at all frequencies of interest. 3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT connected to the spectrum analyzer through calibrated cables, attenuators, and couplers. 4) For conducted spurious emissions, automated test software was used to measure emissions and capture the corresponding plots necessary to show compliance. The measurement software utilized is PCTEST 2G/3G Automation, Version 3.9. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 38 7.2 Occupied Bandwidth 2.1049 Test Overview The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a given emission shall be measured. All modes of operation were investigated and the worst case configuration results are reported in this section. Test Procedure Used KDB 971168 D01 v03r01 Section 4.2 Test Settings 1. The signal analyzers automatic bandwidth measurement capability was used to perform the 99%
occupied bandwidth and the 26dB bandwidth. The bandwidth measurement was not influenced by any intermediate power nulls in the fundamental emission. 2. RBW = 1 5% of the expected OBW 3. VBW 3 x RBW 4. Detector = Peak 5. Trace mode = max hold 6. Sweep = auto couple 7. The trace was allowed to stabilize 8. If necessary, steps 2 7 were repeated after changing the RBW such that it would be within 1 5% of the 99% occupied bandwidth observed in Step 7 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-1. Test Instrument & Measurement Setup Test Notes 10MHz 16-QAM emissions are RB-limited. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 38 Plot 7-1. Occupied Bandwidth Plot (1.4MHz QPSK RB Size 6 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 38 Plot 7-2. Occupied Bandwidth Plot (1.4MHz 16-QAM RB Size 6 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 38 Plot 7-3. Occupied Bandwidth Plot (3MHz QPSK RB Size 15 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 38 Plot 7-4. Occupied Bandwidth Plot (3MHz 16-QAM RB Size 15 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 38 Plot 7-5. Occupied Bandwidth Plot (5MHz QPSK RB Size 25 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 38 Plot 7-6. Occupied Bandwidth Plot (5MHz 16-QAM RB Size 25 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 38 Plot 7-7. Occupied Bandwidth Plot (10MHz QPSK RB Size 50) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 38 Plot 7-8. Occupied Bandwidth Plot (10MHz 16-QAM RB Size 27) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 38 Spurious and Harmonic Emissions at Antenna Terminal 7.3 2.1051 90.691 Test Overview The level of the carrier and the various conducted spurious and harmonic frequencies is measured by means of a calibrated spectrum analyzer. The spectrum is scanned from the lowest frequency generated in the equipment up to a frequency including its 10th harmonic. All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible attenuation level of any spurious emission is 43 + log10(P[Watts]), where P is the transmitter power in Watts. Test Procedure Used KDB 971168 D01 v03r01 Section 6.0 Test Settings 1. Start frequency was set to 30MHz and stop frequency was set to 10GHz (separated into at least two plots per channel) 2. RBW 1MHz 3. VBW 3 x RBW 4. Detector = RMS 5. Trace mode = max hold 6. Sweep time = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-2. Test Instrument & Measurement Setup Test Notes Compliance with the applicable limits is based on the use of measurement instrumentation employing a resolution bandwidth of 100 kHz or greater. However, in the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emission are attenuated at least 26 dB below the transmitter power. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 38 Plot 7-9. Conducted Spurious Plot (5MHz QPSK RB Size 1, RB Offset 0 Low Channel) Plot 7-10. Conducted Spurious Plot (5MHz QPSK RB Size 1, RB Offset 0 Low Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 38 Plot 7-11. Conducted Spurious Plot (5MHz QPSK RB Size 1, RB Offset 0 Low Channel) Plot 7-12. Conducted Spurious Plot (5MHz QPSK RB Size 1, RB Offset 0 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 38 Plot 7-13. Conducted Spurious Plot (5MHz QPSK RB Size 1, RB Offset 0 High Channel) Plot 7-14. Conducted Spurious Plot (5MHz QPSK RB Size 1, RB Offset 0 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 38 Band Edge Emissions at Antenna Terminal 7.4 2.1051 90.691 Test Overview All out of band emissions are measured with a spectrum analyzer connected to the antenna terminal of the EUT while the EUT is operating at maximum power, and at the appropriate frequencies. All data rates were investigated to determine the worst case configuration. All modes of operation were investigated and the worst case configuration results are reported in this section. The minimum permissible attenuation level of any spurious emission removed from the EA licensees frequency block by greater than 37.5 kHz is 43 + log10(P[Watts]), where P is the transmitter power in Watts. The minimum permissible attenuation level of any spurious emission removed from the EA licensees frequency block by up to and including 37.5 kHz is 50 + 10 log10(P[Watts]), where P is the transmitter power in Watts. Test Procedure Used KDB 971168 D01 v03r01 Section 6.0 Test Settings 1. Span was set large enough so as to capture all out of band emissions near the band edge 2. RBW = 100 kHz 3. VBW = 300 kHz 4. Detector = RMS 5. Trace mode = trace average 6. Sweep time = auto couple 7. The trace was allowed to stabilize Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-3. Test Instrument & Measurement Setup Test Notes For channel edge emission, the signal analyzers ACP measurement capability is used. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 38 Plot 7-15. Channel Edge Plot (1.4MHz QPSK RB Size 6 Low Channel) Plot 7-16. Channel Edge Plot (1.4MHz QPSK RB Size 6 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 38 Plot 7-17. Channel Edge Plot (3MHz QPSK RB Size 15 Low Channel) Plot 7-18. Channel Edge Plot (3MHz QPSK RB Size 15 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 38 Plot 7-19. Channel Edge Plot (5MHz QPSK RB Size 25 Low Channel) Plot 7-20. Channel Edge Plot (5MHz QPSK RB Size 25 High Channel) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 38 Plot 7-21. Channel Edge Plot (10MHz QPSK RB Size 50) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 38 Conducted Power Output Data 7.5 90.635 Test Overview Conducted power measurements are performed to measure the average output power of the EUT. The averaging is to be performed only over duration of active transmissions at maximum output power level. The average measurements do not include averaging over periods when the transmitter is quiescent or when operating at reduced power level. Test Procedures Used KDB 971168 D01 v03 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Test Notes Figure 7-4. Conducted Power Measurement Setup 1) The EUT was tested in all possible test configurations. The worst case emissions are reported with the EUT modulations and channel bandwidth configurations shown in the tables below. 2) This unit was tested with its standard battery. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 38 Table 7-2. LTE Band 26 Conducted Power Output Data FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 38 814.701.4QPSK24.750.29950.00-25.25823.301.4QPSK24.200.26350.00-25.80814.701.416-QAM23.840.24250.00-26.16823.301.416-QAM23.630.23150.00-26.37815.503QPSK24.720.29650.00-25.28822.503QPSK24.130.25950.00-25.87815.50316-QAM23.940.24850.00-26.06822.50316-QAM23.760.23850.00-26.24816.505QPSK24.760.29950.00-25.24821.505QPSK24.030.25350.00-25.97816.50516-QAM23.880.24450.00-26.12821.50516-QAM23.640.23150.00-26.36819.0010QPSK24.750.29950.00-25.25819.001016-QAM23.930.24750.00-26.07Frequency [MHz]Channel Bandwidth[MHz]Cond. PWR [dBm]Cond. PWR [Watts]Mod.Cond. PWR Limit [dBm]Margin [dB]
Radiated Spurious Emissions Measurements 7.6 2.1053 90.691 Test Overview Radiated spurious emissions measurements are performed using the substitution method described in ANSI/TIA-
603-E-2016-E-2016 with the EUT transmitting into an integral antenna. Measurements on signals operating below 1GHz are performed using horizontally and vertically polarized tuned dipole antennas. Measurements on signals operating above 1GHz are performed using vertically and horizontally polarized broadband horn antennas. All measurements are performed as peak measurements while the EUT is operating at maximum power, and at the appropriate frequencies. Test Procedures Used KDB 971168 D01 v03r01 Section 5.8 ANSI/TIA-603-E-2016-E-2016 Section 2.2.12 Test Settings 1. RBW = 100kHz for emissions below 1GHz and 1MHz for emissions above 1GHz 2. VBW 3 x RBW 3. Span = 1.5 times the OBW 4. No. of sweep points > 2 x span / RBW 5. Detector = RMS 6. Trace mode = Average (Max Hold for pulsed emissions) 7. The trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 38 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-5. Test Instrument & Measurement Setup Test Notes 1. For LTE mode, the device was tested under all modulations, RB sizes and offsets, and channel bandwidth configurations and the worst case emissions are reported with 1 RB. 2. This unit was tested with its standard battery. 3. The EUT was tested in three orthogonal planes and in all possible test configurations and positioning. The worst case setup is reported in the tables below. 4. The "-" shown in the following RSE tables are used to denote a noise floor measurement. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 38 Table 7-3. Radiated Spurious Data (Ch. 26740) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 38 OPERATING FREQUENCY: MHzCHANNEL: MODULATION SIGNAL: QPSKBANDWIDTH: 10.0MHzDISTANCE: 3metersLIMIT: -13.00 dBm1638.00V - --64.495.36-59.13-46.12457.00V - --59.315.46-53.85-40.93276.00V - --60.667.10-53.56-40.6Spurious Emission Level [dBm]Ant. Pol. [H/V]819.0026740Level at Antenna Terminals [dBm]Substitute Antenna Gain [dBi]Antenna Height [cm]Turntable Azimuth [degree]Margin [dB]Frequency [MHz]
Frequency Stability / Temperature Variation 7.7 2.1055 90.213 Test Overview and Limit Frequency stability testing is performed in accordance with the guidelines of ANSI/TIA-603-E-2016-D-2010. The frequency stability of the transmitter is measured by:
a.) Temperature: The temperature is varied from -30C to +50C in 10C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. The frequency stability of the transmitter shall be maintained within 0.00025% (2.5 ppm) of the center frequency. Test Procedure Used ANSI/TIA-603-E-2016-D-2010 Test Settings 1. The carrier frequency of the transmitter is measured at room temperature (20C to provide a reference). 2. The equipment is turned on in a standby condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10C intervals ranging from -30C to +50C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Test Setup The EUT was connected via an RF cable to a spectrum analyzer with the EUT placed inside an environmental chamber. Test Notes None FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 38 Frequency Stability / Temperature Variation 2.1055, 90.213 Table 7-4. LTE Band 26 Frequency Stability Data (Ch. 26740) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 38 OPERATING FREQUENCY: 819,000,000HzCHANNEL: 26740REFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.00025 % or 2.5 ppm100 %3.80 + 20 (Ref)819,000,00330.0000003100 %- 30819,000,00220.0000003100 %- 20819,000,00330.0000004100 %- 10819,000,00220.0000003100 % 0819,000,00440.0000004100 %+ 10819,000,00330.0000003100 %+ 20819,000,00220.0000003100 % + 30819,000,00220.0000003100 %+ 40819,000,00440.0000004100 %+ 50819,000,00550.0000006BATT. ENDPOINT3.40+ 20819,000,00330.0000004POWER (VDC)VOLTAGE (%)Freq. Dev. (Hz)Deviation (%)3.80FREQUENCY (Hz)TEMP (oC) Frequency Stability / Temperature Variation 2.1055, 90.213 Table 7-5. LTE Band 26 Frequency Stability Data (Ch. 26740) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 37 of 38
-0.10-0.08-0.06-0.04-0.020.000.020.040.060.080.10Deviation (ppm)Temperature (C)Frequency Stability 8 . 0 C O N C L U S I O N The data collected FCC ID: BCG-A1975 complies with all the requirements of Part 90 of the FCC rules. tested and show relate only item(s) the to that the Apple Watch FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-04-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 38 of 38
1 2 3 4 | NFC Test Report | Test Report | 1.14 MiB | November 09 2018 / December 09 2018 |
Applicant Name:
Apple Inc. One Apple Park Way Cupertino, CA 95014 United States FCC ID:
IC:
APPLICANT:
Application Type:
Model/HVIN:
EUT Type:
Frequency:
FCC Classification:
FCC Rule Part(s):
ISED Specification:
Test Procedure(s):
PCTEST ENGINEERING LABORATORY, INC. 18855 Adams Court, Morgan Hill, CA 95037 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctest.com MEASUREMENT REPORT FCC PART 15.225 / ISED RSS-210 NFC Date of Testing:
5/24 - 8/18/2018 Test Site/Location:
PCTEST Lab. Morgan Hill, CA, USA Test Report Serial No.:
1C1806040008-09-R1.BCG BCG-A1975 579C-A1975 Apple Inc. Certification A1975 Watch 13.56MHz Low Power Communications Device Transmitter (DXX) Part 15 Subpart C (15.225) RSS-210 Issue 9 ANSI C63.10-2013, KDB 648474 D03 v01r04 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to the item(s) tested. This revised Test Report (S/N: 1C1806040008-09-R1.BCG) supersedes and replaces the previously issued test report (S/N:
1C1806040008-09.BCG) on the same subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 1 of 36 T A B L E O F C O N T E N T S 1.0 Introduction ...................................................................................................................................... 3 1.1 Scope ..................................................................................................................................................... 3 1.1 PCTEST Test Location .......................................................................................................................... 3 1.2 Test Facility / Accreditations .................................................................................................................. 3 2.0 PRODUCT INFORMATION ............................................................................................................. 4 2.1 Equipment Description ........................................................................................................................... 4 2.2 Device Capabilities ................................................................................................................................ 4 2.3 Test Configuration ................................................................................................................................. 5 2.4 EMI Suppression Device(s)/Modifications .............................................................................................. 5 3.0 DESCRIPTION OF TEST ................................................................................................................ 6 3.1 Evaluation Procedure ............................................................................................................................ 6 3.2 AC Line Conducted Emissions .............................................................................................................. 6 3.3 Radiated Emissions ............................................................................................................................... 7 3.4 Environmental Conditions ...................................................................................................................... 7 4.0 ANTENNA REQUIREMENTS .......................................................................................................... 8 5.0 MEASUREMENT UNCERTAINTY .................................................................................................. 9 6.0 7.0 TEST EQUIPMENT CALIBRATION DATA .................................................................................... 10 TEST DATA ................................................................................................................................... 11 7.1 Summary ............................................................................................................................................. 11 7.2 20dB Bandwidth Measurement ............................................................................................................ 12 7.3 Frequency Stability Test Data .............................................................................................................. 16 7.4 In-Band Radiated Spurious Emission Measurements .......................................................................... 21 7.5 Radiated Spurious Emission Measurements, Out-of-Band .................................................................. 26 7.6 Line Conducted Measurement Data .................................................................................................... 32 8.0 CONCLUSION ............................................................................................................................... 36 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 2 of 36 1.0 I N T R O D U C T I O N Scope 1.1 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Innovation, Science and Economic Development Canada. PCTEST Test Location 1.1 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 18855 Adams Court, Morgan Hill, CA 95037. The measurement facility is compliant with the test site requirements specified in ANSI C63.4-2014 and KDB 414788 D01 v01. 1.2 Measurements were performed at PCTEST Engineering Lab located in Morgan Hill, CA 95037, U.S.A. PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory Accreditation (A2LA) with Certificate number 2041.02 for Specific Absorption Rate (SAR), Hearing Aid Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and Innovation, Science, and Economic Development Canada rules. Test Facility / Accreditations PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS). PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 3 of 36 2.0 P R O D U C T I N F O R M A T I O N 2.1 Equipment Description Device Capabilities The Equipment Under Test (EUT) is the Apple Watch FCC ID: BCG-A1975. The test data contained in this report pertains only to the emissions due to the NFC transmitter of the EUT. Test Device Serial No.: C89WP003K473, D92WW00XKK89 2.2 This device contains the following capabilities:
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, Bluetooth (1x, EDR, HDR4, HDR8, LE), NFC Note: The device supports different modes, types, and data rates of NFC signal. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Table 2-1. NFC Configuration Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 4 of 36 ModeTypeData RateA848 kbpsA424 kbpsA212 kbpsA106 kbpsB848 kbpsB424 kbpsB212 kbpsB106 kbpsF424 kbpsF212 kbpsA848 kbpsA424 kbpsA212 kbpsA106 kbpsB848 kbpsB424 kbpsB212 kbpsB106 kbpsF424 kbpsF212 kbps100% Ask 1 out of 426.48 kbps10 % Ask 1 out of 426.48 kbps100% Ask 1 out of 2561.66 kbps10 % Ask 1 out of 2561.66 kbpsReaderCE(Card Emulation) 2.3 Test Support Equipment Table 2-2. Test Support Equipment Used Test Configuration 2.4 The EUT was set to continuously transmit at 13.56MHz. This was performed using manufacturer software loaded on the phone and a passive RFID tag to allow for continuous transmission. This device was tested in accordance with the guidance of ANSI C63.10-2013. See Sections 3.2 and 3.3 of this test report for a description of the AC line conducted emissions and radiated emissions test setups, respectively. The worst case configuration was investigated for all combinations of the two materials, aluminum and stainless steel with various types of wristbands, metal and non-metal wristbands. The store display sample was investigated and determined as not the worst case. The EUT was also investigated with and without wireless charger. The worst case configuration found was used for all testing. The emissions below 1GHz were tested with the highest transmitting modulation and the worst case configuration. The EUT was manipulated through three orthogonal planes of X-orientation (flatbed), Y-orientation (landscape), and Z-orientation (portrait) during the testing. Only the worst case emissions were reported in this test report. For AC line conducted and radiated test below 1GHz, following configuration were investigated and worst case was reported.
- EUT powered by AC/DC adaptor via USB cable with wireless charger
- EUT powered by host PC via USB cable with wireless charger Software and Firmware 2.5 The test was conducted with firmware version wOS 5.0 installed on the EUT. 2.6 EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and no modifications were made during testing. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 5 of 36 1Apple MacBookModel:A1398S/N:C2QKP008F6F3w/AC/DC AdapterModel:A1435S/N:2Apple USB CableModel:KanziS/N:316F8Aw/ Charging DockModel:FAPS73S/N:17242000868w/ DockModel:X241S/N:GW17E01ST283USB Lightning CableModel:N/AS/N:N/Aw/ AC AdapterModel:A1265S/N:1X0450PGS8QZ4Wireless Charging Pad (WCP)Model:DVT-2aS/N:DLC824400H9J0V64UWireless Charging Pad (WCP)Model:DVT-1dS/N:DLC824401XHJLW04U5Test Pathfinder Mogao BoardModel:X920S/N:920-04087-03w/ EVT SiP CradleModel:X920S/N:PF 20166DC Power SupplyModel:KPS3010DS/N:N/A 3.0 D E S C R I P T I O N O F T E S T Evaluation Procedure AC Line Conducted Emissions 3.1 The measurement procedure described in the American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) was used in the measurement of the EUT. Deviation from measurement procedure.....................................None 3.2 The line-conducted facility is located inside a 7m x 3.66m x 2.7m shielded enclosure. The shielded enclosure is manufactured by AP Americas. The shielding effectiveness of the shielded room is in accordance with MIL-Std-
285 or NSA 65-6. A 1m x 1.5m wooden table 80cm high is placed 40cm away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H Line-Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high-current high-insertion loss power line filters. The external power line filter is EPCOS 2X60A Power Line Filter (100dB Attenuation, 14kHz-18GHz) and the two EPCOs 2X48A filters (100dB Minimum Insertion Loss, 14kHz 10GHz). These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a DC-powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference groundplane. Power cables for support equipment were routed down to the second LvISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions is used for final measurements on the same test site. The analyzer is set to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final measurements. Line conducted emissions test results are shown in Section 7.6. Automated test software was used to perform the AC line conducted emissions testing. Automated measurement software utilized is Rohde & Schwarz EMC32, Version 9.15.0. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 6 of 36 Radiated Emissions 3.3 The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. An 80cm tall test table made of Styrodur is placed on top of the turn table. For measurements above 1GHz, an additional Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33 depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case emissions. 3.4 The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar). Environmental Conditions FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 7 of 36 4.0 A N T E N N A R E Q U I R E M E N T S Excerpt from 15.203 of the FCC Rules/Regulations:
An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The antenna of the EUT are permanently attached. This unit was tested with its standard battery. Conclusion:
The EUT complies with the requirement of 15.203. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 8 of 36 5.0 M E A S U R E M E N T U N C E R T A I N T Y The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine compliance. Contribution Expanded Uncertainty (dB) Line Conducted Disturbance Radiated Disturbance (<1GHz) 3.09 4.98 FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 9 of 36 6.0 T E S T E Q U I P M E N T C A L I B R A T I O N D A T A Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST). Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017. Table 6-1. Annual Test Equipment Calibration Schedule Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 10 of 36 Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number COM-POWER LIN-120A LISN 3/7/2018Annual3/7/2019241296Keysight Technologies N9030A 3Hz-44GHz PXA Signal Analyzer 2/27/2018Annual2/27/2019MY49430244 MaturoNCD/264/205616Mast/TT controllerN/AN/AN/ANCD_264Rohde & Schwarz ESW44EMI Test Receiver11/16/2017Annual11/16/2018101570Rohde & Schwarz TS-PR8Pre-Amplifier (30MHz - 8GHz)1/25/2018Annual1/25/2019102333Rohde & Schwarz HL562EUltra Broadband Antenna (30MHz - 6GHz)6/8/2018Annual6/8/2019100810Rohde & Schwarz HFH2-Z2 Loop Antenna 3/13/2018Annual 3/13/2019100519ESPECSU-241Temperature Chamber8/10/2018Annual8/10/201992009574 7.0 T E S T D A T A Summary 7.1 Company Name:
FCC ID:
Apple Inc. BCG-A1975 FCC Classification:
Low Power Communications Device Transmitter (DXX) Frequencies Examined:
13.56MHz FCC Part Section(s) RSS Section(s) Test Description Test Limit Test Test Condition Result Reference 2.1049 RSS-Gen [6.6]
20 dB Bandwidth N/A PASS Section 7.2 15.225
(a)(b)(c) RSS-210 [B.6]
In-Band Emissions 15.225 (d) 15.209 RSS-Gen [8.9]
Out-of-Band Emissions 15,848V/m @ 30m 13.553 13.567 MHz 334V/m @ 30m 13.410 13.553 MHz 13.567 13.710 MHz 106V/m @ 30m 13.110 13.410 MHz 13.710 14.010 MHz Emissions outside of the specified band (13.110 14.010 MHz) must meet the radiated limits detailed in 15.209 (RSS-
Gen [8.9]) PASS Section 7.4 RADIATED PASS Section 7.5 15.225 (e) RSS-210 [B.6]
Frequency Stability Tolerance 0.01% of Operating Frequency Temperature Chamber PASS Section 7.3 15.207 RSS-Gen [8.8]
AC Conducted Emissions 150kHz 30MHz
< FCC 15.207 limits
(RSS-Gen) LINE CONDUCTED PASS Section 7.6 Note:
This unit was tested with its standard battery. Table 7-1. Summary of Test Results FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 11 of 36 20dB Bandwidth Measurement 7.2 2.1049; RSS-Gen (6.6) Test Overview and Limit The bandwidth at 20dB down from the highest in-band spectral density is measured with a spectrum analyzer connected to the receive antenna while the EUT is operating in transmission mode at the appropriate frequency. Test Procedure Used ANSI C63.10-2013 Section 6.9.2 Test Settings 1. Spectrum analyzer frequency is set to the nominal EUT channel center frequency. 2. RBW = 1 5% OBW 3. VBW 3 x RBW 4. Reference level set to keep signal from exceeding maximum input mixer level for linear operation. 5. Detector = Peak 6. Trace mode = max hold 7. Sweep = auto couple 8. The trace was allowed to stabilize 9. Using the marker-delta function, determine the -20dB down amplitude using [(highest in band spectral density) 20dB]. 10. Set a marker at the lowest frequency of the envelope of the spectral density, such that the marker is at or slightly below the -20dB down amplitude determined in Step 9. 11. Reset marker-delta function and move the marker to other side of the emission until the delta marker amplitude is the same level as reference level amplitude. The marker delta frequency reading at this point is the specified emission bandwidth. Test Notes None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 12 of 36 Frequency 13.56MHz 13.56MHz 13.56MHz 13.56MHz 13.56MHz Figure 7-1. Test Instrument & Measurement Setup Configuration CE A 848kbps CE B 848kbps CE F 424kbps Reader 100 Ask 1 out of 4 Reader 100 Ask 1 out of 256 Table 7-2. 20dB Bandwidth Measurement 20dB Bandwidth 49.00kHz 48.64kHz 43.33kHz 131.3kHz 131.3kHz Figure 7-2. 20dB Bandwidth Plot (CE A 848kbps) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 13 of 36 Figure 7-3. 20dB Bandwidth Plot (CE B 848kbps) Figure 7-4. 20dB Bandwidth Plot (CE F 424kbps) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 14 of 36 Figure 7-5. 20dB Bandwidth Plot (Reader 100% Ask 1 out of 4) Figure 7-6. 20dB Bandwidth Plot (Reader 100% Ask 1 out of 256) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 15 of 36 Frequency Stability Test Data 7.3 15.225; RSS-210 (B.6) Test Overview and Limit Frequency stability testing is performed in accordance with the guidelines of ANSI C63.10-2013. The frequency stability of the transmitter is measured by:
a.) Temperature: The temperature is varied from -20C to +50C in 10C increments using an environmental chamber. b.) Primary Supply Voltage: The primary supply voltage is varied from 85% to 115% of the nominal value for non hand-carried battery and AC powered equipment. For hand-carried, battery-powered equipment, primary supply voltage is reduced to the battery operating end point which shall be specified by the manufacturer. For Part 15.225, the frequency stability of the transmitter shall be maintained within 0.01% of the center frequency. Test Procedure Used ANSI C63.10-2013 Section 6.8 Test Settings 1. The carrier frequency of the transmitter is measured at room temperature (20C to provide a reference). 2. The equipment is turned on in a standby condition for fifteen minutes before applying power to the transmitter. Measurement of the carrier frequency of the transmitter is made within one minute after applying power to the transmitter. 3. Frequency measurements are made at 10C intervals ranging from -20C to +50C. A period of at least one half-hour is provided to allow stabilization of the equipment at each temperature level. Test Setup The EUT was connected via an RF cable to a spectrum analyzer with the EUT placed inside an environmental chamber. Test Notes None. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 16 of 36 Frequency Stability Test Data 15.225; RSS-210 (B.6) Table 7-3. Frequency Stability Test Data (CE A 848kbps) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 17 of 36 OPERATING FREQUENCY: 13,560,000HzREFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.01 % = 1356Hz100 % + 20 (Ref)13,559,523-477-0.0035177100 %- 3013,559,769-231-0.0017035100 %- 2013,559,647-353-0.0026032100 %- 1013,559,789-211-0.0015560100 % 013,559,672-328-0.0024189100 %+ 1013,559,594-406-0.0029941100 %+ 2013,559,160-840-0.0061947100 % + 3013,559,532-468-0.0034513100 %+ 4013,559,613-387-0.0028540100 %+ 5013,559,532-468-0.0034513BATT. ENDPOINT3.40+ 2013,559,567-433-0.00319323.80Deviation (%)3.80VOLTAGE (%)POWER (VDC)TEMP (oC)FREQUENCY (Hz)Freq. Dev. (Hz) Frequency Stability Test Data 15.225; RSS-210 (B.6) Figure 7-7. Frequency Stability Plot (CE A 848kbps) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 18 of 36
-0.03-0.02-0.010.000.010.020.03Deviation (ppm)Temperature (C)Frequency Stability Frequency Stability Test Data 15.225; RSS-210 (B.6) Table 7-4. Frequency Stability Test Data (Reader 100% Ask 1 out of 4) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 19 of 36 OPERATING FREQUENCY: 13,560,000HzREFERENCE VOLTAGE: VDCDEVIATION LIMIT: 0.01 % = 1356Hz100 % + 20 (Ref)13,559,542-458-0.0033776100 %- 3013,559,735-265-0.0019543100 %- 2013,559,619-381-0.0028097100 %- 1013,559,672-328-0.0024189100 % 013,559,594-406-0.0029941100 %+ 1013,559,661-339-0.0025000100 %+ 2013,559,597-403-0.0029720100 % + 3013,559,570-430-0.0031711100 %+ 4013,559,532-468-0.0034513100 %+ 5013,559,480-520-0.0038348BATT. ENDPOINT3.40+ 2013,559,579-421-0.00310473.80Deviation (%)3.80VOLTAGE (%)POWER (VDC)TEMP (oC)FREQUENCY (Hz)Freq. Dev. (Hz) Frequency Stability Test Data 15.225; RSS-210 (B.6) Figure 7-8. Frequency Stability Plot (Reader 100% Ask 1 out of 4) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 20 of 36
-0.03-0.02-0.010.000.010.020.03Deviation (ppm)Temperature (C)Frequency Stability In-Band Radiated Spurious Emission Measurements 7.4 15.225(a)(b)(c); RSS-210 (B.6) Test Overview and Limit The EUT was tested from 13.110 14.010 MHz. All in-band radiated spurious emissions are measured with a spectrum analyzer connected to a loop antenna while the EUT is operating at appropriate frequencies. Only the radiated emissions of the configuration that produced the worst case emissions are reported in this section. All in-band emissions appearing in a restricted band as specified in Section 15.225 of the Title 47 CFR must not exceed the limits shown in Table 7-5. Frequency
[MHz]
13.553-13.567 MHz 13.410-13.553 MHz and 13.567-13.710 MHz 13.110-13.410 MHz and 13.710-14.010 MHz Field Strength Measured Distance
[V/m]
15,848 334 106
[Meters]
30 30 30 Table 7-5. Radiated Limits Test Procedures Used ANSI C63.10-2013 Section 6.4.7 Test Settings 1. RBW = 9kHz 2. VBW 3 x RBW 3. Detector = peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 21 of 36 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-9. Radiated Test Setup Test Notes:
1. All emissions lying in restricted bands specified in 15.225 and RSS-210 are below the limit shown in Table 7-5. 2. All measurements were performed using a loop antenna. The antenna was positioned in three orthogonal positions (X front, Y side, Z top) and the position with the highest emission level was recorded. 3. All emissions were greater than 20 dB below the limit. 4. The EUT was positioned in three orthogonal planes to determine the orientation resulting in the worst case emissions. 5. Measurements were performed at 3m and the data was extrapolated to the specified measurement distance of 30m using the square of an inverse linear distance extrapolation factor (40 dB/decade) as specified in 15.31(f)(2). Extrapolation Factor = 20 log10(30/3)2 = 40dB. 6. The spectrum was investigated from 9kHz up to 30MHz using the loop antenna. Only the emissions shown in the table below were found to be significant. 7. All measurements were recorded using a spectrum analyzer employing a quasi-peak detector. 8. The "-" shown in the following RSE tables are used to denote a noise floor measurement. Sample Calculation o Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
o AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
o Margin [dB] = Field Strength Level [dBV/m] Limit [dBV/m]
FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 22 of 36 In-Band Radiated Spurious Emission Measurements 15.225(a)(b)(c); RSS-210 (B.6) Plot 7-1. In Band Radiated Spurious Plot (CE A 848kbps, Pol. X) Plot 7-2. In Band Radiated Spurious (CE B 848kbps, Pol. X) Plot 7-3. In Band Radiated Spurious Plot (CE F 424kbps, Pol. X) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 23 of 36 0 20 40 60 80 100 12013013.11 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.01Level in dBV/mFrequency in MHzPreview Result 1V-PK+Critical_Freqs PK+FCC NFC Peak LimitFinal_Result PK+FCC NFC Peak Limit 0 20 40 60 80 100 12013013.11 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.01Level in dBV/mFrequency in MHzPreview Result 1V-PK+Critical_Freqs PK+FCC NFC Peak LimitFinal_Result PK+FCC NFC Peak Limit 0 20 40 60 80 100 12013013.11 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.01Level in dBV/mFrequency in MHzPreview Result 1V-PK+Critical_Freqs PK+FCC NFC Peak LimitFinal_Result PK+FCC NFC Peak Limit Plot 7-4. In Band Radiated Spurious Plot (Reader 100 Ask 1 out of 4, Pol. X) Plot 7-5. In Band Radiated Spurious Plot (Reader 100 Ask 1 out of 256, Pol. X) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 24 of 36 0 20 40 60 80 100 12013013.1 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.01Level in dBV/mFrequency in MHzPreview Result 1V-PK+Critical_Freqs PK+FCC NFC Peak LimitFinal_Result PK+FCC NFC Peak Limit 0 20 40 60 80 100 12013013.11 13.2 13.3 13.4 13.5 13.6 13.7 13.8 13.9 14.01Level in dBV/mFrequency in MHzPreview Result 1V-PK+Critical_Freqs PK+FCC NFC Peak LimitFinal_Result PK+FCC NFC Peak Limit In-Band Radiated Spurious Emission Measurements 15.225(a)(b)(c); RSS-210 (B.6) Frequency:
13.56MHz Measurement Distance:
3 Meters Table 7-6. In-Band Radiated Measurements (CE A 848kbps) Table 7-7. In-Band Radiated Measurements (Reader 100 Ask 1 out of 4) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 25 of 36 13.26X--31.28-8.72106.0040.51-49.2313.53X--32.18-7.82334.0050.47-58.2913.56X10022254.2514.2515848.0084.00-69.7513.58X--32.69-7.31334.0050.47-57.7813.85X--30.46-9.54106.0040.51-50.05Frequency [MHz]Ant. Pol. [X/Y/Z]Antenna Height [cm]Turntable Azimuth [degree]3m Field Strength [dBV/m]30m Field Strength [dBV/m]Limit [V/m]Limit [dBV/m]Margin [dB]13.26X--29.73-10.27106.0040.51-50.7813.52X--36.15-3.85334.0050.47-54.3213.56X10021652.4012.4015848.0084.00-71.6013.61X--34.46-5.54334.0050.47-56.0113.78X--30.22-9.78106.0040.51-50.29Frequency [MHz]Ant. Pol. [X/Y/Z]Antenna Height [cm]Turntable Azimuth [degree]3m Field Strength [dBV/m]30m Field Strength [dBV/m]Limit [V/m]Limit [dBV/m]Margin [dB]
Radiated Spurious Emission Measurements, Out-of-Band 7.5 15.209 15.225(d); RSS-Gen (8.9) Test Overview and Limit The EUT was tested from 9kHz up to the 1GHz excluding the band 13.110 14.010 MHz. All measurements up to 960MHz were recorded with a spectrum analyzer employing a quasi-peak detector. All out-of-band emissions appearing in a restricted band as specified in Section 15.225 of the Title 47 CFR must not exceed the limits shown in Table 7-8 per Section 15.209. Frequency 0.009 0.490 MHz 0.490 1.705 MHz 1.705 30.00 MHz 30.00 88.00 MHz 88.00 216.0 MHz 216.0 960.0 MHz Above 960.0 MHz Field Strength Measured Distance
[V/m]
2400/F (kHz) 24000/F (kHz) 30 100 150 200 500
[Meters]
300 30 30 3 3 3 3 Table 7-8. Radiated Limits Out of band Test Procedures Used ANSI C63.10-2013 Section 6.5.4 Test Settings 1. Analyzer center frequency was set to the frequency of the radiated spurious emission of interest 2. RBW = 9kHz for emissions below 30MHz and 100kHz for emissions between 30MHz and 1GHz 3. VBW 3 x RBW 4. Detector = peak 5. Sweep time = auto couple 6. Trace mode = max hold 7. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 26 of 36 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-10. Radiated Test Setup < 30MHz Figure 7-11. Radiated Test Setup > 30MHz FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 27 of 36 Test Notes:
1. All measurements were recorded using a spectrum analyzer employing a quasi-peak detector for emissions below 960MHz. 2. A loop antenna was used to investigate emissions below 30MHz. 3. Both Vertical and Horizontal polarities of the receive antenna were evaluated with the worst case emissions being reported. Below 30MHz the loop antenna was positioned in 3 orthogonal planes (X front, Y side, Z top) to determine the orientation resulting in the worst case emissions. 4. The EUT was positioned in three orthogonal planes to determine the orientation resulting in the worst case emissions. 5. The spectrum is measured from 9kHz to the 10th harmonic and the worst-case emissions are reported. 6. No spurious emissions levels were found to be greater than the level of the fundamental. 7. The "-" shown in the following RSE tables are used to denote a noise floor measurement. Sample Calculation o Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
o AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
o Margin [dB] = Field Strength Level [dBV/m] Limit [dBV/m]
FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 28 of 36 Radiated Spurious Emission Measurements, Out-of-Band 15.209 15.225(d); RSS-Gen (8.9) Plot 7-6. Radiated Spurious Plot 9kHz 30MHz (CE A 848kbps, Pol. X) Plot 7-7. Radiated Spurious Plot 9kHz 30MHz (Reader 100 Ask 1 out of 4, Pol. X) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 29 of 36 Radiated Spurious Emission Measurements, Out-of-Band 15.209 15.225(d); RSS-Gen (8.9) Plot 7-8. Radiated Spurious Plot 30MHz 1GHz (CE A 848kbps, Pol. H & V) Plot 7-9. Radiated Spurious Plot 30MHz 1GHz (Reader 100 Ask 1 out of 4, Pol. H & V) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 30 of 36 0 10 20 30 40 50 60 70 8030M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1H-PK+Preview Result 1V-PK+Critical_Freqs PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6 0 10 20 30 40 50 60 70 8030M 5060 80100M200300400500 8001GLevel in dBV/mFrequency in HzPreview Result 1H-PK+Preview Result 1V-PK+Critical_Freqs PK+FCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6Final_Result QPKFCC Part 15C 30MHz-1GHzFCC Part 15C 30MHz-1GHz_-6 Radiated Spurious Emission Measurements, Out-of-Band 15.209 15.225(d); RSS-Gen (8.9) Tx Frequency 13.56MHz Measurement Distance:
3 Meters Table 7-9. Radiated Measurements (CE A 848kbps) Table 7-10. Radiated Measurements (Reader 100 Ask 1 out of 4) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 31 of 36 27.12X10042-100.2523.0028.9669.54-40.5840.68X10070-79.19-16.0011.8140.00-28.1954.24X250238-77.63-24.005.3740.00-34.6367.80X100210-74.05-21.0011.9540.00-28.0581.36X100233-70.46-19.0017.5440.00-22.4694.92X100201-70.92-19.0017.0843.52-26.44108.48X250155-72.67-18.0016.3343.52-27.19Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Level [dBm]AFCL [dB/m]3m Field Strength [dBV/m]Limit [dBV/m]Margin [dB]27.12X10050-101.6523.0029.1869.54-40.3640.68X10081-73.87-16.0017.1340.00-22.8754.24X250325-77.83-24.005.1740.00-34.8367.80X250128-75.05-21.0010.9540.00-29.0581.36X100324-69.56-19.0018.4440.00-21.5694.92X100189-70.49-19.0017.5143.52-26.01108.48X250325-71.88-18.0017.1243.52-26.40Frequency [MHz]Ant. Pol. [H/V]Antenna Height [cm]Turntable Azimuth [degree]Level [dBm]AFCL [dB/m]3m Field Strength [dBV/m]Limit [dBV/m]Margin [dB]
Line Conducted Measurement Data 7.6 15.207; RSS-Gen (8.8) Test Overview and Limit All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates and modes were investigated for conducted spurious emissions. Only the conducted emissions of the configuration that produced the worst case emissions are reported in this section. All conducted emissions must not exceed the limits shown in the table below, per Section 15.207 and RSS-Gen (8.8). Frequency of emission Conducted Limit (dBV)
(MHz) 0.15 0.5 0.5 5 5 30 Quasi-peak 66 to 56*
56 60 Average 56 to 46*
46 50 Table 7-11. Conducted Limits
*Decreases with the logarithm of the frequency. Test Procedures Used ANSI C63.10-2013, Section 6.2 Test Settings Quasi-Peak Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = quasi-peak 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize Average Field Strength Measurements 1. Analyzer center frequency was set to the frequency of the spurious emission of interest 2. RBW = 9kHz (for emissions from 150kHz 30MHz) 3. Detector = RMS 4. Sweep time = auto couple 5. Trace mode = max hold 6. Trace was allowed to stabilize FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 32 of 36 Test Setup The EUT and measurement equipment were set up as shown in the diagram below. Figure 7-12. Test Instrument & Measurement Setup Test Notes 1. 2. 3. 4. All modes of operation were investigated and the worst-case emissions are reported using mid channel. The emissions found were not affected by the choice of channel used during testing. The limit for an intentional radiator from 150kHz to 30MHz are specified in 15.207 and RSS-Gen (8.8). Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB) QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB) 5. Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV) 6. 7. 8. Traces shown in plot are made using a peak detector. Deviations to the Specifications: None. EUT was tested with the antenna terminated. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 33 of 36 Plot 7-10. Line-Conducted Test Plot (L1, with WCP + Laptop) Table 7-12. Line-Conducted Test Data (L1, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 34 of 36 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV Plot 7-11. Line-Conducted Test Plot (N, with WCP + Laptop) Table 7-13. Line-Conducted Test Data (N, with WCP + Laptop) FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 35 of 36 0 10 20 30 40 50 60 70 80150k 300400500 8001M2M3M4M5M6 810M20M30MLevel in dBVFrequency in HzPreview Result 2-AVGPreview Result 1-QPKCritical_Freqs AVGCritical_Freqs QPKFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AVFinal_Result QPKFinal_Result AVGFCC Part 15 Class B Voltage on Mains QPFCC Part 15 Class B Voltage on Mains AV 8.0 C O N C L U S I O N The data collected relate only to the item(s) tested and show that the Apple Watch FCC ID: BCG-A1975 has been tested to show compliance with Part 15 Subpart C (15.225) of the FCC Rules and RSS-210 of the Innovation, Science and Economic Development Canada Rules. FCC ID: BCG-A1975 MEASUREMENT REPORT
(CERTIFICATION) Approved by:
Quality Manager Test Report S/N:
1C1806040008-09-R1.BCG 2018 PCTEST Engineering Laboratory, Inc. V 8.1 05/10/2018 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM. Test Dates:
5/24 - 8/18/2018 EUT Type:
Watch Page 36 of 36
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-09-12 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2472 | DTS - Digital Transmission System | ||
3 | 2496 ~ 2690 | PCT - PCS Licensed Transmitter worn on body | ||
4 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2018-09-12
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Apple Inc.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0005899216
|
||||
1 2 3 4 | Physical Address |
One Apple Park Way
|
||||
1 2 3 4 |
Cupertino, California 95014
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
t******@pctest.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
BCG
|
||||
1 2 3 4 | Equipment Product Code |
A1975
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
M******** D******
|
||||
1 2 3 4 | Title |
EMC Engineer
|
||||
1 2 3 4 | Telephone Number |
408 9********
|
||||
1 2 3 4 | Fax Number |
408 9********
|
||||
1 2 3 4 |
m******@apple.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
Apple Inc.
|
||||
1 2 3 4 | Name |
M**** D******
|
||||
1 2 3 4 | Physical Address |
One Apple Park Way
|
||||
1 2 3 4 |
Cupertino, California 95014
|
|||||
1 2 3 4 |
United States
|
|||||
1 2 3 4 | Telephone Number |
40899********
|
||||
1 2 3 4 | Fax Number |
40899********
|
||||
1 2 3 4 |
m******@apple.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/21/2018 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | PCT - PCS Licensed Transmitter worn on body | |||||
1 2 3 4 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Apple Watch | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Power output is conducted. The highest reported SAR for product specific (next-to-mouth), simultaneous transmission, and extremity (wrist) use conditions is 0.11 W/kg, 0.39 W/kg, and 0.40 W/kg, respectively. | ||||
1 2 3 4 | Power output is peak conducted. The highest reported SAR for product specific (next-to-mouth), simultaneous transmission, and extremity (wrist) use conditions is 0.14 W/kg, 0.39 W/kg, and 0.40 W/kg, respectively. | |||||
1 2 3 4 | Output power listed is ERP for Part 22 and 27 for frequencies below 1 GHz, EIRP for Part 24 and 27 for frequencies above 1 GHz, and conducted for Part 90S. This device supports bandwidths of 1.4/3/5/10 MHz for LTE Bands 5, 12 and 26, bandwidths 5/10 MHz for LTE Bands 17 and 13, bandwidths of 1.4/3/5/10/15/20 MHz for LTE Bands 2, 25, and 4, and bandwidths of 5/10/15/20 MHz for LTE Band 41. The highest reported SAR for product specific (next-to-mouth), simultaneous transmission, and extremity (wrist) use conditions is 0.25 W/kg, 0.39 W/kg, and 0.40 W/kg, respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
PCTEST Engineering Laboratory, Inc.
|
||||
1 2 3 4 | Name |
R******** O******
|
||||
1 2 3 4 | Telephone Number |
41029********
|
||||
1 2 3 4 | Fax Number |
41029********
|
||||
1 2 3 4 |
r******@pctest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0700000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2472 | 0.201 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2402 | 2480 | 0.067 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15C | CC | 2404 | 2478 | 0.021 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 22H | 826.4 | 846.6 | 0.0003 | 2.5 ppm | 4M10F9W | ||||||||||||||||||||||||||||||||||
3 | 2 | 27 | 1712.4 | 1752.6 | 0.0081 | 2.5 ppm | 4M10F9W | ||||||||||||||||||||||||||||||||||
3 | 3 | 24E | 1852.4 | 1907.6 | 0.0083 | 2.5 ppm | 4M09F9W | ||||||||||||||||||||||||||||||||||
3 | 4 | 27 | 699 | 716 | 0.0002 | 2.5 ppm | 9M11G7W | ||||||||||||||||||||||||||||||||||
3 | 5 | 27 | 699 | 716 | 0.0002 | 2.5 ppm | 5M53D7W | ||||||||||||||||||||||||||||||||||
3 | 6 | 27 | 777 | 787 | 0.0002 | 2.5 ppm | 9M09G7W | ||||||||||||||||||||||||||||||||||
3 | 7 | 27 | 777 | 787 | 0.0002 | 2.5 ppm | 5M51D7W | ||||||||||||||||||||||||||||||||||
3 | 8 | 9 | 814 | 824 | 0.299 | 2.5 ppm | 9M03G7W | ||||||||||||||||||||||||||||||||||
3 | 9 | 9 | 814 | 824 | 0.248 | 2.5 ppm | 5M16D7W | ||||||||||||||||||||||||||||||||||
3 | 1 | 22H | 824 | 849 | 0.0003 | 2.5 ppm | 9M16G7W | ||||||||||||||||||||||||||||||||||
3 | 11 | 22H | 824 | 849 | 0.0002 | 2.5 ppm | 5M50D7W | ||||||||||||||||||||||||||||||||||
3 | 12 | 27 | 1710 | 1755 | 0.008 | 2.5 ppm | 18M1G7W | ||||||||||||||||||||||||||||||||||
3 | 13 | 27 | 1710 | 1755 | 0.007 | 2.5 ppm | 5M53D7W | ||||||||||||||||||||||||||||||||||
3 | 14 | 24E | 1850 | 1915 | 0.008 | 2.5 ppm | 18M1G7W | ||||||||||||||||||||||||||||||||||
3 | 15 | 24E | 1850 | 1915 | 0.007 | 2.5 ppm | 5M46D7W | ||||||||||||||||||||||||||||||||||
3 | 16 | 27 | 2496 | 2690 | 0.012 | 2.5 ppm | 18M1G7W | ||||||||||||||||||||||||||||||||||
3 | 17 | 27 | 2496 | 2690 | 0.011 | 2.5 ppm | 5M47D7W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC