Apple Bluetooth 5 Welcome to the world of Bluetooth, a short-range wireless technology that lets you connect computers, mobile phones, and handheld devices to each other and to the Internet. Your computer includes Bluetooth technology that can help eliminate the need for the cables that traditionally connect devices together. Bluetooth-enabled devices can connect wirelessly to each other anywhere in a 10-meter (33-feet) range, unlike connections between infrared (IR) devices, which must be in line with each other to connect. New features in Apple Bluetooth software allow you to connect to more devices easier, extending the ways you can use and congure Bluetooth technology. This document provides information on how to m connect your computer to Bluetooth-enabled mobile phones and other devices. Connecting Bluetooth devices is known as pairing. connect to the Internet using Bluetooth and a mobile phone exchange les between Bluetooth-enabled computers synchronize data between your computer and Bluetooth-enabled Palm Powered handheld devices m m m Setting Up Your Computer for Bluetooth If your computer is equipped with an Apple Bluetooth module, you need to set up your computer to use Apple Bluetooth software. Open the Bluetooth pane of System Preferences and click the Settings tab. Select Show Bluetooth status in the menu bar. 1 2 Pairing Your Macintosh With a Bluetooth-Enabled Phone Before you can connect to the Internet with your mobile phone, you need to pair your computer with your Bluetooth enabled phone. Make sure your phone is Bluetooth-enabled on and in discoverable mode. See the documentation that came with your phone. Choose Search For Phones from the Bluetooth status menu in the menu bar. Select your phone in the Pair with a Bluetooth Device dialog, then click Pair. Enter a passkey. Use any combination of numbers. When prompted, enter the same passkey on your phone. Your computer is now paired with your phone. The name of your phone is listed in the Bluetooth status menu in the menu bar. Apple Bluetooth software remembers the pairing with your phone so you should only need to pair with your phone once. You can now use your phone to dial your ISP and connect to the Internet. Follow these instructions to set up your computer and connect to the Internet. Note:
digital services and an account with an Internet service provider (fees may apply). To access the Internet, you must have an active mobile phone account capable of Setting Up Your Computer to Connect to the Internet With a Bluetooth-Enabled Phone Choose your phone from the Bluetooth status menu in the menu bar. Open the Network pane of System Preferences. Choose bluetooth modem from the Show pop-up menu. Note:
Preferences. To do this, choose Active Network Ports from the Show pop-up menu, then select bluetooth modem. Enter your ISP information in the TCP/IP and PPP tabs. Choose the model of your phone from the Modem pop-up menu in the Modem tab. Make sure the bluetooth modem port is turned on in the Network pane of System Connecting to the Internet With a Bluetooth-Enabled Phone Choose Open Internet Connect from the Bluetooth status menu in the menu bar. Choose bluetooth modem from the Conguration pop-up menu. Click Connect. 1 2 3 1 2 3 4 5 1 2 3 2 Apple Bluetooth 4/19/02 Apple Confidential Pairing Your Macintosh With Bluetooth-Enabled Devices Apple Bluetooth also lets you pair with other Bluetooth-enabled devices like Palm Powered handheld devices and other Bluetooth-enabled computers. Once you have paired with the device, Bluetooth remembers its name and the type of services it provides. Make sure the devices you want to pair with are in discoverable mode. See the documentation that came with the device. Click the Paired Devices tab in the Bluetooth pane of System Preferences. Click New. Bluetooth searches for Bluetooth-enabled devices in range of your computer. Select the device you want to pair with and click Pair. Enter a passkey. Use any combination of numbers. If prompted, enter the same passkey on your Bluetooth-enabled device. Bluetooth remembers the name of the device. To delete the device from the list, select it and click delete. Adding Serial Ports Apple Bluetooth allows you to add any number of serial ports to your computer to enable incoming and outgoing connections with Bluetooth and LAN access devices. To add serial ports to your computer:
Click New in the Serial Ports tab of the Bluetooth pane of System Preferences. Name and select options for the port. Note:
or select a device from the Select Bluetooth Device Service list. If the port is an outgoing port, click Select Device and then either search for devices 1 2 3 4 1 2 Apple Confidential Apple Bluetooth 3 Exchanging Files Between Bluetooth-Enabled Devices You can use the Bluetooth File Exchange application to exchange les between one or more Bluetooth-enabled devices. The Bluetooth File Exchange application is located in the Bluetooth folder, in the Extras folder inside the Applications folder on your hard disk. Make sure the devices you want to exchange les with are discoverable. Drag the le you want to exchange onto the Bluetooth File Exchange icon. It is located in the Bluetooth folder, in the Extras folder inside the Applications folder on your hard disk. Click Search in the Send Files dialog to nd the Bluetooth-enabled devices in range. Select the name of the device you want to send les to from the list, then click Send. Note:
computer discoverable, select Discoverable in the Settings tab of the Bluetooth pane of System Preferences. If you are asked for a passkey, enter one and click Respond. If device receiving the les is prompted for a passkey, enter the same passkey on the receiving device and click Respond. If the receiving device is prompted that it is preparing to receive a le, click Accept to receive the les. Depending on the options selected, it may ask to open the le. Click Open to open the le. If no devices are found, make sure they are in discoverable mode. To make your 1 2 3 4 5 Synchronizing a Bluetooth-Enabled Palm Powered Device With a Computer Using Palm HotSync Manager If you have a Bluetooth-enabled, Palm Powered device, you can synchronize data between the device and a Bluetooth-enabled Macintosh using Palm HotSync Manager. Make sure you have Palm Desktop 4.0 installed on your computer. For the latest version of the Palm Desktop software, go to www.palm.com/macintosh Setting Up Your Computer to Synchronize With the Palm Powered Device Open HotSync Manager, located in the Palm folder in the Applications folder on your hard disk. Select bluetooth-pda-sync-port in the Connection Settings tab. Note:
Make sure Enabled is selected in the HotSync Controls tab. 1 2 4 Apple Bluetooth 4/19/02 Apple Confidential Setting Up Your Palm Powered Device to Synchronize With Your Computer The following set up need only be done once and may differ on your device. The names and locations of some menus may be different. For precise instructions, see the documentation that came with your device. Open HotSync on your Palm Powered device. Choose Connection Setup from the Options menu. Click New to create a new connection and name the connection. Choose PC from the Connect to pop-up menu and choose Bluetooth from the Via pop-up menu. Tap to nd Bluetooth-enabled devices and choose your device from the list. Click OK. Click OK, and then click Done. Synchronizing Your Handheld Device With Your Computer Choose the Bluetooth connection from the connections pop-up menu. Click the HotSync icon. 1 2 3 4 5 6 1 2 Apple Confidential Apple Bluetooth 5 Communications Regulation Information Turn the television or radio antenna until the interference stops. Move the computer to one side or the other of the television or radio. Move the computer farther away from the television or radio. Plug the computer into an outlet that is on a different circuit from the television or radio. FCC Declaration of Conformity This device was tested to comply with FCC Standards and is for home or ofce use.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected. Radio and Television Interference The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properlythat is, in strict accordance with Apples instructionsit may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specications in Part 15 of FCC rules. These specications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices. If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures:
m m m m If necessary, consult an Apple-authorized service provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions. Important Changes or modications to this product not authorized by Apple Computer, Inc., could void the FCC Certication and negate your authority to operate the product. This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance. Responsible party (contact for FCC matters only):
26-A, Cupertino, CA 95014-2084, 408-974-2000. Exposure to Radio Frequency Energy The radiated output power of the optional Apple Bluetooth module is far below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized. Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numrique de la Class B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. EuropeEU Declaration of Conformity This device complies with the specications ETS 300 328 and ETS 300 826, following the provisions of the EMC Directive 89/336/EEC. This device also complies with the R&TTE Directive. Apple Computer, Inc., Product Compliance, 1 Innite Loop M/S 2002 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used under license. HotSync is a registered trademark of Palm, Inc. Palm and Palm Powered are trademarks of Palm Inc. 082-0027-A