Swipe up for Control Center and down for Digital Crown Turn to scroll, zoom, or adjust. Press to return to watch face. Press and hold for Siri. Or raise wrist and speak hands-free. Charging Charger attaches magnetically to the back of the case. Side Button Press to view recent apps. Double-click for Apple Pay. Press and hold to turn Apple Watch on or off, or to make an emergency call.*
compatibility (EMC) and wireless compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral If this equipment does cause harmful interference to radio or devices and shielded cables between system components. It television reception, which can be determined by turning the is important that you use compliant peripheral devices and equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
shielded cables between system components to reduce the Reorient or relocate the receiving antenna. possibility of causing interference to radios, televisions, and Increase the separation between the equipment and receiver. other electronic devices. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Responsible party (contact for FCC matters only):
Consult the dealer or an experienced radio/TV technician Apple Inc. for help. One Apple Park Way, MS 911-2HW Cupertino, CA 95014 www.apple.com/contact Important: Changes or modifications to this product not authorized by Apple could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product. Canadian Compliance Statement This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices. Responsible party (contact for FCC matters only):
Apple Inc. One Apple Park Way, MS 911-2HW Cupertino, CA 95014 www.apple.com/contact Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CAN ICES-3 (B)/NMB-3(B) Exposure to radio frequency energy The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person's body. Le present appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Certification and Compliance Australia New Zealand U.S. Japan Korea R-RMI-APL-A1923 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is FCC Compliance Statement subject to the following two conditions: (1) This device may not This device complies with part 15 of the FCC rules. Operation cause harmful interference, and (2) this device must accept any is subject to the following two conditions: (1) This device may interference received, including interference that may cause not cause harmful interference, and (2) this device must undesired operation. accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant Note: This equipment has been tested and found to comply to part 15 of the FCC Rules. These limits are designed to with the limits for a Class B digital device, pursuant to part 15 provide reasonable protection against harmful interference in a residential installation. of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a This equipment generates, uses, and can radiate radio residential installation. frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to This equipment generates, uses, and can radiate radio radio communications. However, there is no guarantee that frequency energy and, if not installed and used in accordance interference will not occur in a particular installation. with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician receiver. for help. Important: Changes or modifications to this product not authorized by Apple could void the electromagnetic