FCC ID: RAXCM4652442 DOCSIS 3.1 Dual-band AX6000 Wi-Fi 6 Cable Gateway

January 2020 R01 Wi-Fi 6 Cable Gateway CM4652442-MM Quick Start Guide Quick Start Guide Package Contents:

1 Docsis 3.1 Wi-Fi 6 Voice Gateway 1 RJ-45 Ethernet Cable 1 Power Adapter Quick Installation Guide RJ-45 Power Adapter QSG_CM4652442-MM_2020.indd 1 QSG_CM4652442-MM_2020.indd 1 1/15/2020 1:57:01 PM 1/15/2020 1:57:01 PM Device Overview The Wi-Fi 6 Cable Gateway supports both MoCA 2.1 and DOCSIS 3.0/3.1 for broadband data transfer to an existing coaxial cable system. With the channel bonding connectivity, the Gateway allows for the aggregation of multiple downstream and upstream channels and brings up to 5 Gbps for download speed and 1 Gbps for upload speed. The Gateway is also compliant with the IEEE 802.11ax specification while maintaining full backwards compatibility with the 802.11ac/a/b/

g/n standards. IEEE 802.11ax is the new addition of the IEEE 802.11 standards, running at dual-band of 2.4 GHz and 5 GHz band types, as well as co-existing with the 802.11ac/11n network. It delivers wide bandwidth of up to 160 MHz, and reliable high data rates of up to 4.8 Gbps. The Wi-Fi 6 Cable Gateway supports four wired gigabit LAN ports, one F-type coax WAN port, one FXS RJ-11 port for telephony, and 802.11ax dual-band wireless capabilities. It provides high speed transmission rate for data/voice/video triple-play services. The Wi-Fi 6 Cable Gateway delivers sufficient bandwidth to stream HD video, listen to digital music, play online games, transfer large files, voice service, and surf the Internet simultaneously. LED Indication c d e f g h i j c Power On Blue Receiving power d Downstream Flashing Blue Off System initializing Power off On Blue Flashing Blue Downstream channel has been locked. Scanning for a downstream channel connection e Upstream On Blue Upstream channel has been locked. Flashing Blue Scanning for a upstream channel connection f Online On Blue On Green WAN connection is in DOCSIS 3.1 mode. WAN connection is in DOCSIS 3.0 mode. Flashing Off No WAN connection Synchronizing with termination system of your ISP (Internet service provider), and waiting for IP assignment from DHCP server g Voice On Blue Flashing Blue Off EMTA

(Embedded Multimedia Terminal Adapter) link has been established. Phone call ongoing, a phone has been picked up to dial, or there is an incoming call. No voice-over-

cable link h LAN (Front Panel) On Blue Flashing Blue Off Ethernet LAN connection has been established. Sending or receiving data on any LAN port of the device. No LAN connection

(Rear Panel) On Green Flashing Green Off Ethernet LAN connection has been established. The indicated LAN port is sending or receiving data.. No LAN connection on the indicated LAN port. i Wireless On Blue Wireless link has been established. Flashing Blue Data is being transmitted via wireless network. Slow Flashing Off WPS mode in process No wireless link j MoCA (Multimedia over Coax Alliance) On Blue Flashing Blue Off No MoCA link Coaxial connection has been established and working properly. Sending or receiving network traffic via coaxial link page 1 QSG_CM4652442-MM_2020.indd 1 QSG_CM4652442-MM_2020.indd 1 1/15/2020 1:57:02 PM 1/15/2020 1:57:02 PM Network Connectivity Step 1 -

a. Connect one end of the provided Ethernet cable into any of the four LAN ports on the Wi-Fi 6 Cable Gateway. Then insert the other end of the cable into the Ethernet port of your PC or other Ethernet network device. b. Use a coaxial cable to connect the coaxial port of the Gateway to a cable wall outlet. Step 2 - Plug the power adapter into the power socket on the rear of the Wi-Fi 6 Cable Gateway, and the other end into a power outlet. Step 3 - Wireless Link: On the Windows desktop, click Start/

Settings/Network & Internet. The Network status window will open. Click Wi-Fi on the left menu bar of the screen. to browse the available wireless networks. Choose Wi-Fi 6 Cable Gateway from the list and click Connect button to start using the wireless network. NOTE: Be sure all of the clients use the same values on your wireless network. (Default SSID: Wireless) The SSID is the name of your wireless network. It is used to distinguish your wireless network from other wireless network. Device Connectors WPS Button - Press this button for at least 4 seconds when activating the WPS function. Ethernet LAN Ports - Gigabit Ethernet ports (RJ-45). Connect network devices on your local area network to these ports. Reset Button Gateway. Pressing this button less than 5 seconds brings up a reboot to the Pressing the button over 5 seconds restores the Gateway to the default factory settings. Coax Port - Connect the coax line to this port. Phone Port - Connect the telephone line to this port (RJ-11). Power Inlet - Connect the included power adapter to this inlet. Hardware Installation Installation Precaution Comply with the following guidelines for a safe use of your product:

Avoid installing this product during an electrical storm. There may be a remote risk of electric shock from lightning. Do not try to disassemble and/or reassemble this device. Tempering the device might void the product warranty. When mounting or cleaning the device, be sure to unplug the power cord from the device. electrical shock. Choose a Location Appropriate safe and solid location which can sustain the device even in strong wind. Do not place the device in high humidity environments. For best RF performance, be sure to position this device at the highest possible location for getting the strongest signal strength from a base station. Keep your hands dry when handling the device to avoid the possible System Requirements The SSID and password was printed at the bottom of the Gateway. To install and connect to the Wi-Fi 6 Cable Gateway, you must have:

Broadband Internet service and modem/gateway with coax or Ethernet connection. 2.4/5 GHz 802.11ax/ac/a/b/g/n wireless adapter installed on each PC. Alternatively an Ethernet adapter can be used. Windows 7 or later, or Mac OS 10 or later. An up to date web browser: Internet Explorer 5.5 or later, Google Chrome, or Mozilla 1.7/Firefox 1.0 or later. page 2 QSG_CM4652442-MM_2020.indd 2 QSG_CM4652442-MM_2020.indd 2 1/15/2020 1:57:02 PM 1/15/2020 1:57:02 PM Software Installation Configuring Client PC After completing the hardware setup by connecting all your network devices, you need to configure your computer to connect to the Wi-Fi 6 Cable Gateway. To access the Internet through the Wi-Fi 6 Cable Gateway, you must configure the network settings of the computers in your LAN to use the same IP subnet as the gateway. The default IP settings for the Wi-Fi 6 Cable Gateway are:

IP address: 192.168.0.1 Subnet mask: 255.255.255.0 Windows 7 1. On the Windows desktop, click Start/Control Panel/Network and Internet/View network status and tasks. 2. The Network and Sharing Center window will open. Click Local Area Connection in the View your active networks field of the screen. 3. On the connection status screen, click Properties. 4. Double-click Internet Protocol Version 6/Version 4 (TCP/IPv6/v4). If Obtain an IP(v6) address automatically and Obtain DNS server 5. address automatically are selected, your computer is already configured for DHCP. If not, select the options. Windows 8 1. On the Windows desktop, click Start/Desktop. 2. Right-click the Ethernet icon on the task bar, then select Open 3. Network and Sharing Center. The Network and Sharing Center window will open. Click Ethernet in the View your active networks field of the screen. 4. On the Ethernet Status screen, click Properties. 5. Double-click Internet Protocol Version 6/Version 4 (TCP/IPv6,v4). If Obtain an IP(v6) address automatically and Obtain DNS server 6. address automatically are selected, your computer is already configured for DHCP. If not, select the options. Windows 10 1. On the Windows desktop, click Start/Settings/Network & Internet. 2. The Network status window will open. Click Ethernet on the left menu bar of the screen. 3. Click Open Network and Sharing Center. 4. Double-click the Ethernet connection for this device. 5. On the connection status screen, click Properties. 6. Double-click Internet Protocol Version 6/Version 4 (TCP/IPv6/v4). If Obtain an IP(v6) address automatically and Obtain DNS server 7. address automatically are already selected, your computer is already configured for DHCP. If not, select the options. Obtain IP Settings from Your Wireless Wi-Fi 6 Cable Gateway Now that you have configured your computer to connect to your gateway, it needs to obtain new network settings. By releasing old DHCP IP settings and renewing them with settings from your Wi-Fi 6 Cable Gateway, you can verify that you have configured your computer correctly. 1. On the Windows desktop, click Start/Programs/Accessories/

2. Command Prompt. In the Command Prompt window, type ipconfig /release and press the Enter key. 3. Type ipconfig /renew and press the Enter key. Verify that your IP Address is now 192.168.0.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.0.1. These values confirm that your Wireless Wi-Fi 6 Cable Gateway is functioning correctly. 4. Type exit and press the Enter key to close the Command Prompt window. Manual TCP/IP Settings Follow steps 1-5 in Windows 7 on page 3. Select Use the following IP Address. 1. 2. 3. Enter an IP address based on the default network 192.168.0.x

(where x is between 2 and 254), and use 255.255.255.0 for the subnet mask. Use 192.168.0.1 for the Default gateway field. Select Use the following DNS server addresses. 4. 5. Enter the IP address for the Wi-Fi 6 Cable Gateway in the Preferred DNS server field. This automatically relays DNS requests to the DNS server(s) provided by your ISP. Otherwise, add a specific DNS server into the Alternate DNS Server field and click OK to close the dialogue boxes. Record the configured information in the following table. TCP/IP Configuration Setting IP Address ____.____.____.____ Subnet Mask ____.____.____.____ Preferred DNS Server ____.____.____.____ Alternate DNS Server ____.____.____.____ Default Gateway ____.____.____.____ Macintosh Computer You may find that the instructions here do not exactly match your operating system. This is because these steps and screen shots were created using Mac OS 10.2. Mac OS 7.x and above are similar, but may not be identical to Mac OS 10.2. Follow these instructions:

1. 2. Double-click the Network icon in the Systems Preferences window. 3. Pull down the Apple Menu . Click System Preferences. If Using DHCP Server is selected in the Configure field, your computer is already configured for DHCP. If not, select this option. Your new settings are shown in the TCP/IP tab. Verify that your IP Address is now 192.168.0.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.0.1. These values confirm that your Wireless Wi-Fi 6 Cable Gateway is functioning. 4. Close the Network window. Now your computer is configured to connect to the Wi-Fi 6 Cable Gateway. QSG_CM4652442-MM_2020.indd 3 QSG_CM4652442-MM_2020.indd 3 1/15/2020 1:57:02 PM 1/15/2020 1:57:02 PM page 3

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 32cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

The label will be permanently affixed at a conspicuous location on the device. LABEL LOCATION FCC IDRAXCM4652442

Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd.,Hsinchu, 30071 Taiwan Date: 2020/3/27 FCC ID: RAXCM4652442 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

Arcadyan Technology Corporation hereby authorizes Debby Lin/Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Debby Lin/Senior Specialist of BV CPS Taoyuan on Arcadyan Technology Corporations behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours,

Simon Liu / Manager Arcadyan Technology Corporation Tel: 886-3-5727000 #14250 Fax: 886-3-5727063 E-mail: simon_liu@arcadyan.com

Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd.,Hsinchu, 30071 Taiwan Date: 2020/3/27 FCC ID: RAXCM4652442 Declaration for DFS master devices We, Arcadyan Technology Corporation hereby declare that the device meets all the other requirements specified in Part 15E Section 15.407. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Simon Liu / Manager Arcadyan Technology Corporation Tel: 886-3-5727000 #14250 Fax: 886-3-5727063 E-mail: simon_liu@arcadyan.com

Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd.,Hsinchu, 30071 Taiwan Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Date: 2020/3/27 FCC ID: RAXCM4652442 To the attention of Federal Communications Commission Authorization and Evaluation Division

Application as outlined below:

Schematics Block Diagram Operational Description Software Operational Description

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors.

The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application.

Sincerely yours,

Simon Liu / Manager Arcadyan Technology Corporation Tel: 886-3-5727000 #14250 Fax: 886-3-5727063 E-mail: simon_liu@arcadyan.com

Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd.,Hsinchu, 30071 Taiwan Date: 2020/3/27 FCC ID: RAXCM4652442 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External photos Test Setup photos Users manual Internal Photos Sincerely yours,

Simon Liu / Manager Arcadyan Technology Corporation Tel: 886-3-5727000 #14250 Fax: 886-3-5727063 E-mail: simon_liu@arcadyan.com

FCC ID: RAXCM4652442 Description of Permissive Change The application is prepared for FCC class II permissive change by adding frequency band through software enabling to its original parent application. The adding frequency band is from 5.26 to 5.32GHz and 5.50 to 5.72GHz. Both devices, original and updated versions, are electrically identical in all aspects except enabling frequency bands of 5260 ~ 5320 MHz and 5500 ~ 5720MHz. Debby Lin / Senior Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 ext. 1900 Fax: 886-3-327 0892 Email: debby.lin@tw.bureauveritas.com Data: 2020-04-23 Regards,

Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd.,Hsinchu, 30071 Taiwan Date: 2020/3/27 We, Arcadyan Technology Corporation declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: RAXCM4652442 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Simon Liu / Manager Arcadyan Technology Corporation Tel: 886-3-5727000 #14250 Fax: 886-3-5727063 E-mail: simon_liu@arcadyan.com