Product Specification Product Specification WN8522D 8 -CP Dual Band WLAN Adapter v.01 draft WN8522D 4 1 Product Specification Table of Contents Chapter 1 Chapter 2 Introduction .......................................................................................................... 4 1. Introduction ................................................................................................................. 4 1.1 Product Features ........................................................................................................ 4 1.2 Applications .............................................................................................................. 4 Hardware .............................................................................................................. 5 2.1 General Overview ..................................................................................................... 5 2.2 Hardware Architecture .............................................................................................. 5 2.3 Main Chipset Information ......................................................................................... 5 Software ............................................................................................................... 6 3.1 Operating System Supported ..................................................................................... 6 3.2 Wireless Mode Supported ......................................................................................... 6 3.3 Security ...................................................................................................................... 6 Appearance ........................................................................................................... 7 Chapter 4 Chapter 5 Specifications ....................................................................................................... 8 References ................................................................................................................................ 10 Chapter 3 WN8522D 4 2 Product Specification Revision History Reason for revision Initial Document
Issue date August 10th 2010 Written by Troy Chen Edition #
V 01 WN8522D 4 3 Product Specification Chapter 1 Introduction 1. Introduction WN8522D is a dual band wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 300 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11a/b and IEEE 802.11g ,and draft IEEE 802.11n standards. WN8522B will enable a next generation of high-data-rate platforms for operation in the 2.4 GHz band that deliver a five-fold speed increase. The cost and performance advantages will make it an ideal solution for high bandwidth enterprise applications, such as wireless video conferencing and large file transfers. It is compatible with 802.11g standard's mandatory modulation schemesComplementary Code Keying (CCK), which is used in 802.11b, and Orthogonal Frequency Division Multiplexing (OFDM), used in 802.11g and draft 802.11n. Using CCK ensures backward-compatibility with the installed Wi-Fi 802.11b base, while OFDM provides the speed required for today's high-bandwidth applications. 1.1 Product Features High speed for wireless LAN connection, RX up at 300 Mbps data rate. Backward compatible to the existing IEEE 802.11a/b/g WLAN infrastructure. User-friendly utility to configure SSID, security setup and site survey. Wireless data encryption with 64, 128 encryption for security. Support USB v2.0 1.2 Applications Home networking for device sharing. Wireless multimedia. WN8522D 4 4 Product Specification Chapter 2 Hardware 2.1 General Overview USB 2.0 Interface and 802.11 n chipset-on-board design. Antenna: 2 external Antennas on board 2.2 Hardware Architecture Broadcom 43236 single chip USB2.0 2.3 Main Chipset Information BCM43236 is a dual band IEEE 802.11n-compliant MAC/PHY/Radio complete system on a chip with 2.4Ghz and 5GHz internal PA WN8522D 4 5 Product Specification Chapter 3 Software 3.1 Operating System Supported Windows 2000, XP, Vista Linux Driver 3.2 Wireless Mode Supported AP (Infrastructure) Client mode 3.3 Security AP (Infrastructure) mode supports Static WEP that support both 64 and 128 bit keys. WPA(TKIP) with PSK Ad-hoc mode supports None (plaintext) Static WEP that supports both 64 and 128 bit keys. WN8522D 4 6 Product Specification Chapter 4 Appearance WN8522D 4 7 Product Specification Chapter 5 Specifications Frequency Band:
Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA FCC Canada IC Europe ETSI Japan STD-T66/STD-33 802.11a Radio : 5 GHz 2412~2462MHz (Ch1~Ch11) 2412~2462MHz (Ch1~Ch11) 2412~2472MHz (Ch1~Ch13) 2412~2484MHz (Ch1~Ch14) 5.150~5.250GHz 5.250~5.350 GHz 5.470~5.725 GHz 5.725~5.850GHz Operating Channels:
IEEE 802.11b/g/n compliant:
11 channels (US, Canada) 13 channels (ETSI) 14 channels (Japan) Transmit Power and Sensitivity:
TX Output Power:(Typical) TBD 11b 11g 11n 16 +/- 1.5 dBm 15 +/- 1.5 dBm@54Mbps 11 +/- 1.5 dBm Rx Sensitivity:(Typical)
-69dBm at HT20 m15 2.4GHz
-91dBm at HT20 m0 2.4GHz
-69dBm at HT20 m15 5.0GHz
-90dBm at HT20 m0 5.0GHz Modulation DBPSK @1Mbps DQPSK@2Mbp WN8522D 4 8 Product Specification CCK@5.5/11Mbps BPSK@6/9 Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mpb and above Current consumption(5V DC):
TX: 2164mW at 11dBm HT40 CH38 2x2 RX: 1405mW at 11dBm HT40 CH38 2x2 Power Saving: TBD Radio OFF mode: TBD Operating Temperature: 0 ~ 60 oC ambient Storage Temperature: -20 ~ 60 oC ambient Humidity: under 85% and must be non-condensing Regulation and certification compliance available:
ETSI/CE FCC ESD: EN61000-4-2, which specifies 4kV contact and 8kV air discharge. WN8522D 4 9 Product Specification References BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp., be reproduced, copied or used, in parts or as a whole, for any purpose whatsoever, except the manufacture of articles for Arcadyan Technology Corp. Arcadyan makes no warranties with respect to the correctness, accuracy or wholeness of this specification. The information in this document is subject to change without notice. Arcadyan reserves the right to make revisions to this document and the product described herein without obligation to notify any person or entity of any such changes. WN8522D 4 10 Product Specification FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. WN8522D 4 11 Product Specification IMPORTANT NOTE:
This modules brand name is: Arcadyan Technology Corporation and with a model ID:
WN8522D 8-CP.This module is limited to be integrated with typical host device, such as TV application. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for a population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
RAXWN8522D8CP ". The FCC part 15.19 statement below has to also be available on the label:
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. WN8522D 4 12 Product Specification IC Statement:
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. WN8522D 4 13 Product Specification IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE:
This modules brand name is: Arcadyan Technology Corporation and with a model ID:
WN8522D 8-CP.This module is limited to be integrated with typical host device, such as TV application.The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for a population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. IC statement is required to be available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC :
4711A-WN8522D8CP ". WN8522D 4 14