FCC ID: RAX-AIOS4-0F HEOS 4.X Platform Module

by: Arcadyan Technology Corporation latest update: 2020-01-16 model: AIOS4-0F

Four grants have been issued under this FCC ID from 10/14/2015 to 01/16/2020 (this is one of twelve releases in 2020 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked password defaults, drivers, troubleshooting guides, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
1 2 3 4 OEM Manual Users Manual pdf 428.41 KiB
1 2 3 4 User Manual Users Manual pdf 391.49 KiB
1 2 3 4 C2PC letter Cover Letter(s) pdf 213.73 KiB December 06 2019 / January 16 2020
1 2 3 4 Confidential letter Cover Letter(s) pdf 218.14 KiB December 06 2019 / January 16 2020
1 2 3 4 DFS TEST PHOTOS Test Setup Photos pdf 145.46 KiB December 06 2019 / January 16 2020
1 2 3 4 DFS test report Test Report pdf 996.11 KiB December 06 2019 / January 16 2020
1 2 3 4 MPE test report RF Exposure Info pdf 221.90 KiB December 06 2019 / January 16 2020
1 2 3 4 Power of Attorney Letter Cover Letter(s) pdf 214.11 KiB December 06 2019 / January 16 2020
1 2 3 4 RF Test Photos Test Setup Photos pdf 493.01 KiB December 06 2019 / January 16 2020
1 2 3 4 RF test report Test Report pdf 4.54 MiB December 06 2019 / January 16 2020
1 2 3 4 Software Security SDR Software/Security Inf pdf December 06 2019 confidential
1 2 3 4 TPC declaration letter Cover Letter(s) pdf 216.04 KiB December 06 2019 / January 16 2020
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 External Photos pdf
1 2 3 4 Human Exposure RF Exposure Info pdf 230.45 KiB
1 2 3 4 Internal Photos pdf
1 2 3 4 ID Label/Location Info pdf
1 2 3 4 Cover Letter(s) pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Setup Photos pdf
1 2 3 4 Test Setup Photos pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Report pdf
1 2 3 4 Test Setup Photos pdf
1 2 3 4 OEM Manual Users Manual pdf 428.41 KiB
1 2 3 4 User Manual Users Manual pdf 391.49 KiB
1 2 3 4 C2PC letter Cover Letter(s) pdf 213.73 KiB December 06 2019 / January 16 2020
1 2 3 4 Confidential letter Cover Letter(s) pdf 218.14 KiB December 06 2019 / January 16 2020
1 2 3 4 DFS TEST PHOTOS Test Setup Photos pdf 145.46 KiB December 06 2019 / January 16 2020
1 2 3 4 DFS test report Test Report pdf 996.11 KiB December 06 2019 / January 16 2020
1 2 3 4 MPE test report RF Exposure Info pdf 221.90 KiB December 06 2019 / January 16 2020
1 2 3 4 Power of Attorney Letter Cover Letter(s) pdf 214.11 KiB December 06 2019 / January 16 2020
1 2 3 4 RF Test Photos Test Setup Photos pdf 493.01 KiB December 06 2019 / January 16 2020
1 2 3 4 RF test report Test Report pdf 4.54 MiB December 06 2019 / January 16 2020
1 2 3 4 TPC declaration letter Cover Letter(s) pdf 216.04 KiB December 06 2019 / January 16 2020
1 2 3 4 Human Exposure RF Exposure Info pdf 230.45 KiB

frequency equipment class purpose
1 2020-01-16 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2015-10-14 2412 ~ 2462 DTS - Digital Transmission System Original Equipment
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
1 2 3 4 Effective 2020-01-16
1 2 3 4 2015-10-14
1 2 3 4 Applicant's complete, legal business name Arcadyan Technology Corporation
1 2 3 4 FCC Registration Number (FRN) 0009258708
1 2 3 4 Physical Address No.8, Sec.2, Guangfu Rd.
1 2 3 4 Hsinchu, N/A
1 2 3 4 Hsinchu, N/A 30071
1 2 3 4 Taiwan
app s TCB Information
1 2 3 4 TCB Application Email Address t******@timcoengr.com
1 2 3 4 T******@TIMCOENGR.COM
1 2 3 4 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 Grantee Code RAX
1 2 3 4 Equipment Product Code AIOS4-0F
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 Name S******** L********
1 2 3 4 Title Manager
1 2 3 4 Telephone Number 886-3******** Extension:
1 2 3 4 Fax Number 886-3********
1 2 3 4 E-mail s******@arcadyan.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 DTS - Digital Transmission System
1 2 3 4 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)HEOS 4.X Platform Module
1 2 3 4 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?Yes
1 2 3 4 No
1 2 3 4 Modular Equipment TypeSingle Modular Approval
1 2 3 4 Purpose / Application is forClass II Permissive Change
1 2 3 4 Original Equipment
1 2 3 4 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 Grant CommentsSingle Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.1 dBi and 3.66 dBi in 2.4GHz and 5GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz, and 80 MHz bandwidth modes.
1 2 3 4 Single Modular Approval. Power listed is maximum combined conducted output power in 802.11bgn mode and maximum conducted output power for BT4.0 mode. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.1 dBi and 3.66 dBi in 2.4 GHz and 5.2 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
1 2 3 4 Single Modular Approval. Power listed is conducted. This device is restricted to fixed indoor and mobile use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.1 dBi and 3.66 dBi in 2.4 GHz and 5.2 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
1 2 3 4 Single Modular Approval. Power listed is maximum combined conducted output power. This device is restricted to fixed indoor and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.1 dBi and 3.66 dBi in 2.4 GHz and 5.2 GHz band, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz, and 80 MHz bandwidth modes.
1 2 3 4 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 Firm Name Sporton International Inc.
1 2 3 4 Name A******** C****
1 2 3 4 A******** C********
1 2 3 4 Telephone Number +886-********
1 2 3 4 886-3******** Extension:
1 2 3 4 Fax Number +886-********
1 2 3 4 886-3********
1 2 3 4 E-mail a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.243
1 2 15E CC MO 5260 5320 0.223
1 3 15E CC MO 5500 5720 0.221
1 4 15E CC MO 5745 5825 0.307
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC MO 2412 2462 0.149
2 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0070000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E 38 CC MO 5180 5240 0.243
4 2 15E 38 CC MO 5260 5320 0.223
4 3 15E 38 CC MO 5500 5720 0.221
4 4 15E 38 CC MO 5745 5825 0.307

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC