FCC ID: RAXAIOS7 HEOS 7.0 Platform Module

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894278.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case AIOS-7.0 P a g e :

User Manual Model Name: WN9722OAX22-DM-MAIN (AIOS7.0) Brand NameArcadyan AIOS-7.0 Table of Contents P a g e :

1 SPECIFICATION ................................................................................................................ 3 1-1 Basic Specification ............................................................................................................................................. 3 2 DETAIL SPECIFICATION .................................................................................................. 4 2-1 Product Specification .......................................................................................................................................... 7 2-1-1 WLAN0 Specification .............................................................................................................................. 5 2-1-2 Bluetooth Specification ........................................................................................................................... 5 3 Normal setup ................................................................................................................... 6 AIOS-7.0 P a g e :

Model name 1 SPECIFICATION 1-1 Basic Specification Item 2. Contents Manufacture Product Name Model Name Chip OS FW Driver/Utility Support Band Interface Arcadyan HEOS 7.0 Platform Module WN9722OAX22-DM-MAIN (AIOS7.0) SOC CPU 2.4GHz MAC/BB/RF 2.4GHz PA(Tx) 2.4GHz LNA(Rx) 2.4GHz BPF(Rx) Vendor Mediatek Mediatek Mediatek Mediatek ACX DP1608 5GHz MAC/BB/RF Mediatek 5GHz PA(Tx) 5GHz LNA(Rx) 5GHz BPF(Rx) WAN LAN PHY ODM FW spec Driver OEM Mediatek Mediatek ACX DP1608 None Realtek Arcadyan Utility Arcadyan Refer wireless spec Item LAN Link Rate 1000Mbps Number of ports 1 HDMI USB PCIe 5V 2.0 2.0 2.0 1 1 1 Supply Voltage Power consumption 13.08W (maximum) Weight Dimensions Design life time Under 78g 95.6 x 75 x 1.2mm 5years at 25 degrees 2 Detail Specification 2-1 Product Specification CPU RAM Items Vendor Parts number Operation frequency Type Width Operation Freq Capacity ROM Type I/O speed Capacity Number of port Connector Type Wired LAN Chip Contents MTK 1.7GHz DDR3 16bit 2133MHz 128MB eMMC 50ns 8Gb 1 RJ45 MAC PHY Vendor MTK Realtek Standard 10BASE-T/100BASE-T/1000BASE-Tx Number of port 2 USB Connector USB Type A Connector Standard HDMI Chip Standard USB2.0 Vendor MTK HDMI 2.0 2-1-1 WLAN Specification Item Chip Interface Frequency DataRate MIMO AntennaPort Specification Remark SDIO 2400~2483.5MHz(FCC,CE,JP) 2471~2497MHz(JP) 5150~5250MHz(W52,UNII1,Band1) 5250~5350MHz(W53,UNII2A,Band2) 5470~5725MHz(W56,UNII2C,Band3) 5725~5850MHz(W58,UNII3,Band4) DFSsupport 6GHzband 5955~7125MHz IEEE802.11b:

11,5.5,2,1Mbps IEEE802.11a 54,48,36,24,18,12,9,6Mbps IEEE802.11nHT20 Upto144Mbps IEEE802.11nHT40 Upto300Mbps IEEE802.11acVHT80 Upto866.7Mbps IEEE802.11axHE80 Upto1200Mbps 2T2R U.FLcompatibleconnector 2-1-2 Bluetooth Specification Item Specification Reark Chip Interface SDIO Operating Frequency Modulation Channel Spacing Receive Sensitivity Antenna 2.42.4835GHz GFSK 250kHz AdaptiveFrequencyHopping,24bitCRC 128bitAESCCM 1MHz 86dBmat0.1%BER ExternalU.FLconnector Impedance:50Ohm Normal Setup

(EUT 1G ETH RJ45 link PCIP domain set to 192.168.50.xxx , use telnet and set IP to 92.168.50.100input root then press "enter" button. Fig. Windows CMD Fig. Login for telnet 192.168.50.100 Setup EUT to link AP:

Prepare an AP device (with wi-fi 5G function)set IP address to 192.168.0.102and set SSID of 5G to 5G / password : 12345678

# telnet command:

python3 arc_wifi.py -s 5G -p 12345678 -I 192.168.0.102

#connect AP and EUTset IP address of wlan0 to 192.168.0.102 ping 192.168.0.101 -I 192.168.0.102

# use wlan0 (192.168.0.102) of EUT to ping 192.168.0.101 which is the IP address of the PC/NB linked AP LAN port. Fig. Set up Wi-Fi connection between DUT and AP Fig. ping 192.168.0.101 from 192.168.0.102 FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device is restricted for indoor use. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrator only. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. OEM integrators are responsible for ensuring that the end-user has no manual instructions to remove or install module The module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). The host manufacturer should reference KDB Publication 996369 D04 Module Integration Guide. USERS MANUAL OF THE END PRODUCT:

In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems. LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains TX FCC ID:

RAXAIOS7 ". If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC regulations restrict the operation of this device to indoor use only. IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz. Slection dynamique de frquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. For indoor use only. Pour une utilisation en intrieur uniquement. Devices shall not be used for control of or communications with unmanned aircraft systems. Les appareils ne doivent pas tre utiliss pour contrler ou communiquer avec des systmes d'aronefs sans pilote. IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. PourlesproduitsdisponiblesauxtatsUnis/Canadadumarch,seullecanal111peuventtreexploits.Slection d'autrescanauxn'estpaspossible. This radio transmitter (IC: 4711A-AIOS7) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Leprsentmetteurradio(IC:4711AAIOS7)atapprouvparIndustrieCanadapourfonctionneraveclestypes d'antennenumrscidessousetayantungainadmissiblemaximald'antenne.Lestypesd'antennenoninclusdans cetteliste,oudontlegainestsuprieuraugainmaximalindiqu,sontstrictementinterditspourl'exploitationde l'metteur. IMPORTANT NOTE:

This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:

In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:

The final end product must be labeled in a visible area with the following " Contains IC:4711A-AIOS7

". The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or product packaging or product literature which shall be available with the end product or online. Devices shall not be used for control of or communications with unmanned aircraft systems. Les appareils ne doivent pas tre utiliss pour contrler ou communiquer avec des systmes d'aronefs sans pilote. CE Statement For MPE Statement Mobile device This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. All operational modes:

2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11n (VHT20), 802.11n (VHT40),,802.11ax (HEW20),802.11ax (HEW40), Bluetooth(BR/EDR, LE), 5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80),802.11ax (HEW80), 802.11ax(HEW20),802.11ax (HEW40) The frequency and the maximum transmitted power in EU are listed below:

2412-2472MHz: 20 dBm 2402-2480MHz (BR/EDR): 20 dBm 2402-2480MHz (LE): 20 dBm 5180-5240MHz: 23 dBm 5260-5320MHz: 20 dBm 5500-5700MHz: 20 dBm 5745-5825 MHz: 13.98 dBm 5955-6415MHz: 23 dBm AT EE IT PT BE FI LV RO BG FR LT SK CZ CY HR DE HU EL LU MT NL ES SI DK IE PL SE UK(NI) WLAN: restricted to indoor use only when operating in 5150-5350 MHz band. The device is restricted to indoor use only when operating in the 5945 to 6425MHz frequency range. Arcadyan Germany Technology GmbH Koelner Strasse 10b, 65760 Eschborn, Germany 5GHz band (W52, W53): Indoor use only (except communicate to high power radio) Telec Statement Set Ant. Port Brand Model Name 1 2 1 2 3 1 2 3 1 WIESON ARY196-0383-005-00 1 WIESON ARY196-0383-006-00 2 WIESON ARY196-0383-007-00 1 WIESON ARY196-0383-008-00 1 WIESON ARY196-0383-009-00 2 WIESON ARY196-0383-0010-00 Antenna Type Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Dipole Antenna Connector Gain (dBi) 2.4GHz 5GHz 6GHz Bluetooth I-PEX

2.1 I-PEX 2.2 2.7 2.8 I-PEX 1.7 1.6 1.7

I-PEX

1.7 I-PEX 2.0 2.2 2.3 I-PEX 1.1 1.0 0.9

, CCXXxxLPyyyZz

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894273.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Declaration of label location Letter Date: 2023/10/26 FCC IDRAXAIOS7 To Whom It May Concern:

We, declare that device is applicable to this situation as below. And we would place the FCC ID as the followed requiremwent. When the device is so small, or for such use that it is impracticable to label with a font size that is four-points or larger

(and the device does not utilize electronic labeling), then the FCC ID shall be placed in the user manual, and the FCC ID shall also be placed either on the device packaging or on a removable label attached to the device. Respectfully, Applicants company name

: Arcadyan Technology Corporation Applicants company address

: No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Signature

Name and Job Title

: Simon Liu / Manager E-Mail Tel Fax

simon_liu@arcadyan.com

: +886-3-5727000 #14250

: +886-3-5727063

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894275.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Packaging FCCIDwouldbeshownoncartonlabel.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894265.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Attestation Statements Date: 2023/08/09 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Attestation Statements Part 2.911(d)(5)(i)-(ii) Filing FCC IDRAXAIOS7 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) Arcadyan Technology Corporation (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) Arcadyan Technology Corporation (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Respectfully, Applicants company name

: Arcadyan Technology Corporation Applicants company address

: No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Signature

Name and Job Title

: Simon Liu / Manager E-Mail Tel Fax

simon_liu@arcadyan.com

: +886-3-5727000 #14250

: +886-3-5727063

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894267.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Confidential Letter Date: 2023/5/10 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC IDRAXAIOS7 To Whom It May Concern:

Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

Block Diagrams Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Respectfully, Applicants company name

: Arcadyan Technology Corporation Applicants company address

: No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Signature

Name and Job Title

: Simon Liu / Manager E-Mail Tel Fax

simon_liu@arcadyan.com

: +886-3-5727000 #14250

: +886-3-5727063

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894274.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Modul leAppr rovalR equest r tLetter Date:2023/10 D 0/19 Sub bject:Module eApproval FCC CID:RAXAIOS S7 To We sta hos 1. 2. 3. 4. WhomItMay e,SportonInte teoftheart stequipment Therequir Therequir Therequir Therequir beenfulfil The requi standalon The requir manualof Therequir alltheinst Therequir yConcern:

ernationalInc deviceapprov

.Therequirem rementofRFs rementofbuf rementofpow rementsofse led.Pleasere rement of st netestconfigu rement of lab fthismodule. rementofcom tructionsform rementofRFe c.HsinchuLab vedundermo mentsregulat shielding:The fferedinputs:

wersupplyreg ction15.203a ferencethee tandalone te uration. beling: The in Pleasealsose mplianceonsp maintainingco exposure:Ple 5. 6. 7. 8. boratory,area oduleapprova edinCFR47P eshieldingoft Buffereddata gulation:The and15.204(C) xhibitionTest est configurat authorizedby alauthorizatio Part15.212ha theradioport ainputsstage partnumber

):Therequire Report. tion: Please ArcadyanTec on.Theapplica avebeenfulfil tioncanbede hasbeeninte ofthepower mentsofante hnologyCorp ationofthism ledandclearl emonstratedi egratedinchip regulatorisM ennaconnecto vetheir porationtohav cifiedto mob moduleisspec below. lyexplainedb o. ExternalPhoto nexhibitionE N. pMT7921ASN MT7921ASN. orandspurio usemissionh ile have nstruction on eetheexhibit pecificruleor ompliancehas asereferexhi the labeling tionLabelSam roperatingre sbeenclearly bitionRFExpo mple. reference exh hibition Test rule of the e end product Configuratio n Photo for the has been sta ated in the us sers quirements:T statedinthe osureforthe TherequiredF UsersManua complianceo FCCrulehasb al. of MPE RFex beenfulfilled and posurerule. Ple easedonothe esitatetocont tactmeforan nyquestionso ofthisrequest tletter.Thank you. Co mpanyname Co mpanyAddre ss Sig gnature Na me Job bTitle

SportonInte rnationalInc. HsinchuLabo oratory No.8,Ln.724 4,BoaiSt.,Zh hubeiCity,Hsi nchuCounty3 302010,Taiwa an(R.O.C.) LeoHuang Manager

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894276.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Power of Attorney Date: 2023/5/10 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Hsinchu Laboratory Address

: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name

Leo Huang Job Title

: Manager e-mail

Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: RAXAIOS7 Respectfully, Applicants company name

: Arcadyan Technology Corporation Applicants company address

: No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Signature

Name and Job Title

: Simon Liu / Manager E-Mail Tel Fax

simon_liu@arcadyan.com

: +886-3-5727000 #14250

: +886-3-5727063

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894277.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6894380.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Arcadyan Technology Corporation No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Letter of Declaration on LPI Client Operation Date: 2023/5/10 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 FCC IDRAXAIOS7 To Whom It May Concern:

We, Arcadyan Technology Corporation, attest that this device under FCC ID RAXAIOS7 complies with device protocol requirements and operational restrictions:

1. Device Protocol Attestation Statement:

a. The device will only associate and connect with a low-power indoor access point or subordinate device and never directly connect to other client devices. b. This device will always initiate transmission under the control of a low-power indoor AP or subordinate. However, there may exist situations where the client may transmit brief messages, prior to being under the control of an AP, to join an AP network. But these brief messages will only occur if the client has detected that an AP or subordinate is operating on a particular channel. These brief messages will have a time-out mechanism such that if it does not receive a response from an AP it will not continually repeat the request. c. This device will be lower or equal to the power advertised by the indoor low-power access point or subordinate and never above the maximum output power allowed by the FCC grant. d. Contention-Based Protocol, as demonstrated in the test report, is permanently embedded in the module and is not host-dependent. 2. Understanding of Statement acknowledging device restrictions:

a. This device is prohibited for control of or communications with unmanned aircraft systems, including drones. Respectfully, Applicants company name Applicants company address

: Arcadyan Technology Corporation

: No.8, Sec.2, Guangfu Rd., Hsinchu, 30071 Taiwan Signature

Name and Job Title E-Mail Tel Fax simon_liu@arcadyan.com

: Simon Liu / Manager

: +886-3-5727000 #14250

: +886-3-5727063