Product Specification Product Specification WN8522D 10-CP IEEE Dual Band 802.11n USB2.0 Module v.02 Arcadyan P/N FICCP8522014J-P (Connect-DIP) Compal P/N PK29820010I WN8522D 10 1 Product Specification Table of Contents Chapter 1 Introduction ............................................................................ 5 1. Introduction ................................................................................................................. 5 1.1 Product Features........................................................................................................ 5 1.2 Applications .............................................................................................................. 5 Chapter 2 Hardware ................................................................................... 6 2.1 General Overview ..................................................................................................... 6 2.2 Hardware Architecture .............................................................................................. 6 2.3 Main Chipset Information ......................................................................................... 6 2.4 PCB dimension............................................................................................................. 6 2.5 Pin Assignment,............................................................................................................ 7 2.6 Connector Type, ........................................................................................................... 8 2.7 Label Drawing.............................................................................................................. 9 2.8 BOM List.................................................................................................................... 10 Chapter 3 Software ..................................................................................... 13 3.1 Operating System Supported................................................................................... 13 3.2 Wireless Mode Supported ....................................................................................... 13 3.3 Security.................................................................................................................... 13 Chapter 4 Appearance ............................................................................ 14 4.1 Module Pix ........................................................................................................... 14 WN8522D 10 2 Product Specification Chapter 5 Specifications ....................................................................... 15 Chapter 5 Specifications ....................................................................... 16 References................................................................................................................... 18 WN8522D 10 3 Revision History Product Specification Edition #
Reason for revision V 01 V 02 Initial Document Revised version Issue date August 29th 2011 December 16th, 2011 Written by Troy Chen Stephanie Tsai WN8522D 10 4 Product Specification Chapter 1 Introduction 1. Introduction WN8522D is a dual band wireless 802.11n USB Adapter which enables wireless networking systems to attain data communication speeds up to 300 megabits-per-second (Mbps), while remaining backward compatible to the existing installed base of Wi-Fi systems worldwide. It supports operation to the IEEE 802.11a/b and IEEE 802.11g ,and draft IEEE 802.11n standards. WN8522B will enable a next generation of high-data-rate platforms for operation in the 2.4 GHz band that deliver a five-fold speed increase. The cost and performance advantages will make it an ideal solution for high bandwidth enterprise applications, such as wireless video conferencing and large file transfers. It is compatible with 802.11g standard's mandatory modulation schemesComplementary Code Keying (CCK), which is used in 802.11b, and Orthogonal Frequency Division Multiplexing (OFDM), used in 802.11g and draft 802.11n. Using CCK ensures backward-compatibility with the installed Wi-Fi 802.11b base, while OFDM provides the speed required for today's high-bandwidth applications. 1.1 Product Features High speed for wireless LAN connection, RX up at 300 Mbps data rate. Backward compatible to the existing IEEE 802.11a/b/g WLAN infrastructure. User-friendly utility to configure SSID, security setup and site survey. Wireless data encryption with 64, 128 encryption for security. Support USB v2.0 1.2 Applications Home networking for device sharing. Wireless multimedia. WN8522D 10 5 Product Specification Chapter 2 Hardware 2.1 General Overview USB 2.0 Interface and 802.11 n chipset-on-board design. Antenna: Antennas on board 2.2 Hardware Architecture Broadcom 43236 single chip USB2.0 2.3 Main Chipset Information BCM43236 is a dual band IEEE 802.11n-compliant MAC/PHY/Radio complete system on a chip with 2.4Ghz and 5GHz internal PA 2.4 PCB dimension PCB dimension : 60x30 mm Weight (Connect-DIP)6.6035g +/- 1g WN8522D 10 6 Product Specification 2.5 Pin Assignment, V+
D-
D+
GND WOWL WN8522D 10 7 2.6 Connector Type, Product Specification WN8522D 10 8 2.7 Label Drawing Product Specification WN8522D 10 9 2.8 BOM List Part no 165000073400J CICCP8522014J 123700011600J 175000377000J NICCP8522014J 175000377100J 249300000100J SICCP8522014J 102100045100A 102100038100E 1021A1000019J 102100019100E 1023A1000050J 1023A1000065J 1023A1000064J 102300070100J 102400038100J 110300251100J 110300298100J 116000062100J 116000061100J 116800144100J 116800324100J 116800168100E 1195A0000023J 141852220021J 20000000JN60A 20000000JT90E WN8522D 10 Product Specification Descrip RNA R0A SCHEMATIC FILE WN8522D 10-CP (D)
??CONFIG WN8522D 10-CP (D) R01 PARTITION COVER WN8522B-LF-FX LT V0.10 FINAL TEST PROGRAM WN8522D 10-CP (D)
??PCBA WN8522D 10-CP (S) Con-DIP MAIN V0.10 PRE TEST PROGRAM WN8522D 10-CP (D) R04 MAC_ID #NEW:743170# #OLD:7C4FB5;00264D# ARC
??SMD ASM WN8522D 10-CP (S) Con-DIP MAIN BEAD 100MHz 25% 600ohm 300mA 0402 MURATA BEAD 100MHz 25% 600ohm 300mA 0402 LT/LF TAIYO BEAD 100MHz 25% 220ohm 3A 0805 HF MAXECHO BEAD 100MHz +-25% 220ohm 3A 0805 LT/LF TDK CHOKE SMD 100KHz 2.2uH 20% 1.2A 2.8x3mm HF TOKO CHOKE POWER IND 1MHz 2.2uH 30% 1.3A 2.5X2mm HF TOKO
?!CHOKE POWER IND 1MHz 2.2uH 20% 0.1ohm 1.5A 2520 HF HITACHI CHOKESMD 100KHz 2.2uH 20% 215mohm 1.28A 2.8X2.6mm HF GOTREND FILTER SMD 240~1000MHz 1.5ohm RFCMF1220100M3T LT/LF WALSIN
?!RF BROADCOM
?!RF IC SE2577L Dual Band 802.11n LNA FEM QFN20 ROHS SIGE X'TAL 20MHz 7ppm 18pF 35ohm 100uW 3.2X2.5mm SMD LT/LF TXC X'TAL 20MHz +/-7ppm 18pF 3.2X2.5mm SMD LT/LF eCERA REG PWM STEP-DOWN EUP3020JIR1 1A TDFN-12 LT/LF EUTECH REG AUR9707AGD PWM DC/DC CONV ADJ 1A WDFN-12L HF AURA CONV RT8020PQW ADJ 1A BUCK WDFN-12L LT/LF RICHTEK
?!CONN RF SMD6 MM8130-2600RB8 MURATA
?!R0A PCB WN8522D 10-CP (D) (4L) LT/LF RES SMD 0ohm 5% 1/16W 0402 HF RES SMD 0ohm 5% 1/20W 0201 T0.25 HF IC BCM43236KMLG 2.4/5GHz a/b/g/n QFN88 LT/LF 10 20010000FN60J 20010020A056J 20010020A021J 20010020A019J 20010030JT70J 20015020A008J 20022100A007J 20026730FN60E 20040210FN61E 20059020FN60E 20060420FN60J 2040900A0000J 2041013JH100J 2041013JH100E 2041013JH104E 204101AA0001J 2041029KE100E 204102AA0003J 204102AA0001J 2041039KA101E 2041030A0012J 2041043A0021J 2041043A0022J 2041043KC100E 2041049KJ001E 2041049KJ000E 204104AKJ000J 2041053A0014J 2041053KJ001J 2041053KJ010J 2041060A0022J 2041060A0025J 2043303JH100J 2043303JH100E WN8522D 10 Product Specification RES SMD 100 ohm +-1% 1/16W 0402 T0.35 HF RES SMD 10Kohm 1% 1/20W 0201 T0.23 HF WALSIN RES SMD 10Kohm 1% 1/20W 0201HF CYNTEC RES SMD 10Kohm 1% 1/20W 0201 HF YAGEO RES SMD 100K OHM 5% 1/20W 0201 T0.25 HF RES SMD 15Kohm 1% 1/20W 0201 T0.23 HF YAGEO RES SMD 221ohm 1% 1/20W 0201 T0.3 HF WALSIN RES SMD 267K ohm +-1% 1/16W 0402 T0.35 HF RES SMD 4.02Kohm 1% 1/16W 0402 T0.35 HF RES SMD 59Kohm 1% 1/16W 0402 LT/LF RES SMD 60.4Kohm 1% 1/16W 0402 LT/LF C SMD CER 9pF +-0.5pF 25V NPO 0201 T0.3mm HF MURATA C SMD CER 100pF 5% 50V NPO 0402 LT/LF C SMD CER 100pF 5% 50V NPO 0402 T0.5mm LT/LF C SMD CER 100pF 5% 50V NPO 0402 LT/LF MURATA C SMD CER 100pF 5% 25V NPO 0201 T0.3 HF MURATA C SMD CER 1000pF 10% 25V X7R 0201 T0.3mm LT/LF C SMD CER 1000pF 10% 25V X7R 0201 T0.3mm HF DARFON C SMD CER 1000pF 10% 25V X7R 0201 T0.3mm HF MURATA C SMD CER 10nF 10% 10V X5R 0201 T0.3mm LT/LF TAIYO C SMD CER 0.01uF 10% 10V X7R 0201 T0.3 HF MURATA C SMD CER 0.1uF +-10% 16V X7R 0402 T0.5mm LT/LF DARFON
(LW) C SMD CER 0.1uF +-10% 16V X5R 0402 T0.5mm LT/LF TAIYO
(LW) C SMD CER 0.1uF +-10% 16V X7R 0402 T0.5mm LT/LF C SMD CER 0.1uF 10% 6.3V X5R 0201 T0.3mm LT/LF TAIYO C SMD CER 0.1uF 10% 6.3V X5R 0201 LT/LF C SMD CER 0.1uF 10% 6.3V X5R 6.3V 0201 T0.3mm LT/LF MURATA C SMD CER 1uF 10% 6.3V X5R 0402 T0.5mm HF C SMD CER 1uF +-10% 6.3V X5R 0402 T0.5mm LT/LF TAIYO C SMD CER 1uF 10% 6.3V X5R 0402 T0.5 HF C SMD CER 10uF 10% 16V X5R 0805 T1.25mm HF MURATA C SMD CER 10uF 10% 16V X5R 0805 T1.25mm HF DARFON C SMD CER 33pF 5% 50V NPO 0402 HF C SMD CER 33pF +-5% 50V NPO 0402 T0.5mm LT/LF MURATA 11 2044751KC100A 2044751KC110A 2044754MJ000E 2044754A0013J 246106-002 TICCP8522014J 1182A0000103J 123700020600J PICCP8522014J 146000108800J 146066-102 146139-003 146500063300J 147000055300J 147020136800J 147040009200J 147040092900J 147050002500J 147150000400J 246106-002 246200000600A WN8522D 10 Product Specification C SMD CER 4.7uF 10% 16V X5R 1206 LT/LF TAIYO C SMD CER 4.7uF 10% 16V X7R 1206 HF C SMD CER 4.7uF 10% 6.3V X5R 0603 T0.8 LT/LF MURATA C SMD CER 4.7uF 10% 6.3V X5R 0603 T0.8 HF TAIYO ACCLABEL 18.2X7.1mm(SING) LT
??NON SMD ASM WN8522D 10-CP (S) Con-DIP MAIN
?!PIN HEADER 1X5P 1.27mm LT/LF LCU R01 PARTITION COVER WN8522D-AK LT
??SHIP KIT WN8522D 10-CP (S) Con-DIP
?!R0A PRODUCT LABEL WN8522D 10-CP (S) Con-DIP
()CARTON LABEL 100MMX100MM LT R01 ACCLABEL DISKETTE 70X50MM LT
$R01 CARTON LABEL 100*100MM GREEN LT
??R01 CARTON WN8522D 10-CP
??R01 BOX WN8522D 10-CP R01 ANGLE BOARD 50X50X5X800mm LT
??R01 PARTITION WN8522D 10-CP R01 BAG ANTI STATIC WN4601B-LF-CP LT R01 PALLET 1230X1100X120mm () LT ACCLABEL 18.2X7.1mm(SING) LT MONTHLY LABEL ON CARTON LT 12 Product Specification Chapter 3 Software 3.1 Operating System Supported Windows 2000, XP, Vista Linux Driver 3.2 Wireless Mode Supported AP (Infrastructure) Client mode 3.3 Security AP (Infrastructure) mode supports Static WEP that support both 64 and 128 bit keys. WPA(TKIP) with PSK Ad-hoc mode supports None (plaintext) Static WEP that supports both 64 and 128 bit keys WN8522D 10 13 Product Specification Chapter 4 Appearance 4.1 Module Pix 14 WN8522D 10 Product Specification WN8522D 10 15 Product Specification Chapter 5 Specifications 5.1 Frequency Band:
Draft 802.11n Radio: 2.4 GHz 802.11g Radio: 2.4 GHz 802.11b Radio: 2.4 GHz USA FCC Canada IC 802.11a Radio : 5 GHz 2412~2462MHz (Ch1~Ch11) 2412~2462MHz (Ch1~Ch11) 5.150~5.250GHz 5.725~5.850GHz Operating Channels:
IEEE 802.11b/g/n compliant:
11 channels (US, Canada) Transmit Power and Sensitivity:
TX Output Power:
2,4 GHz 11b: 15 +/- 2 dbm 11g: 13 +/- 2 dbm 11n HT20, 2.4GHz: 13 +/- 2 dbm 11n HT40, 2.4GHz: 12 +/- 2 dbm 5 GHz 11a 12 +/- 2 dBm 11n 20 MHz 12 +/- 2 dBm 11n 40 MHz 12 +/- 2 dBm Rx Sensitivity:(Typical) 802.11a:
o Typical -70dBm@54Mbps, +/-2dBm 802.11n 5GHz HT20:
(TBC) o MCS=7 -68dBm@54Mbps, +/-2dBm 802.11n 5GHz HT40:
(TBC) o MCS=7 -65dBm@54Mbps, +/-2dBm 802.11b:
WN8522D 10 16 Product Specification o Typical -86dBm@11Mbps, +/-2dBm 802.11g:
o Typical -72dBm @ 54Mbps, +/-2dBm Draft 802.11n 2.4GHz HT20:
o MCS=7 -68dbm, +/-2dBm Draft 802.11n 2.4GHz HT40:
o MCS=7 -65dbm, +/-2dBm Modulation DBPSK @1Mbps DQPSK@2Mbp CCK@5.5/11Mbps BPSK@6/9 Mbps QPSK@12/18Mbps 16-QAM@24Mbps 64-QAM@48/54Mpb and above Current consumption(5V DC):
TX: 2500 MW at 11dBm HT40 CH38 2x2 RX: 1765 MW at 11dBm HT40 CH38 2x2 Radio OFF mode: < 100mA Operating Temperature: 0 ~ 60 oC ambient Storage Temperature: -20 ~ 60 oC ambient Humidity: under 85% and must be non-condensing Regulation and certification compliance available:
FCC IC CONFETEL WN8522D 10 17 Product Specification References BRCM Reference Design Functional Specification IEEE 802.11b Standard Specification IEEE 802.11g Standard Specification IEEE 802.11n draft Standard Specification The drawings, specifications and the data contain herein are the exclusive property of Arcadyan Technology Corp. issued in strict confidence and shall not, without the prior written permission of Arcadyan Technology Corp., be reproduced, copied or used, in parts or as a whole, for any purpose whatsoever, except the manufacture of articles for Arcadyan Technology Corp. Arcadyan makes no warranties with respect to the correctness, accuracy or wholeness of this specification. The information in this document is subject to change without notice. Arcadyan reserves the right to make revisions to this document and the product described herein without obligation to notify any person or entity of any such changes. WN8522D 10 18 Product Specification Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. FCC Radiation Exposure Statement:
WN8522D 10 19 Product Specification This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:RAXWN8522D10". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label:
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. WN8522D 10 20 Product Specification This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication. IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. WN8522D 10 21 Product Specification Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. IC statement is required to be available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC : 4711A-WN8522D10". WN8522D 10 22