|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2011-05-13
|
|
1 2
|
Applicant's complete, legal business name |
Arcadyan Technology Corporation
|
|
1 2
|
FCC Registration Number (FRN) |
0009258708
|
|
1 2
|
Physical Address |
No.8, Sec.2, Guangfu Rd.
|
|
1 2
|
Hsinchu, N/A 30071
|
|
1 2
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
B******@phoenix-testlab.de
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
RAX
|
|
1 2
|
Equipment Product Code |
WN8522D465
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
S**** L******
|
|
1 2
|
Title |
Manager
|
|
1 2
|
Telephone Number |
886-3******** Extension:
|
|
1 2
|
Fax Number |
886-3********
|
|
1 2
|
E-mail |
s******@arcadyan.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 | DTS - Digital Transmission System |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | IEEE Dual Band 802.11n USB2.0 Module |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, 5510 to 5670 MHz.
Class II Permissive Change covers modifications as indicated in this filing. |
| 1 2 | Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz.
Class II Permissive Change covers modifications as indicated in this filing. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
Sporton International Inc.
|
|
1 2
|
Name |
A****** C********
|
|
1 2
|
Telephone Number |
886-3******** Extension:
|
|
1 2
|
Fax Number |
886-3********
|
|
1 2
|
E-mail |
a******@sporton.com.tw
|
|