FCC ID: ACQ-VIP7802 WiFi Set Top Box

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5232555.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case VIP7802 OVERVIEW Front/Side panels STATUS LED MULTI-FUNCTION BUTTON Rear panel HDMI For connection to TV set (4K, High & Standard Definition digital video and digital audio). ETHERNET For broadband connection when no Wi-Fi network is available. MICRO USB For connection to the power supply (included). Important Safety Instructions Never place the streamer on top of or close to any heat sources such as other electronic devices. Doing so will reduce life time and may cause irreparable damage or malfunction. Do not use the streamer near water. Note that the ambient temper-

ature must be below 104 F/40 C. Be sure to maintain necessary space around the streamer to allow for proper ventilation. Never use the streamer outside. The streamer is designed to stand on a horizontal surface. Do not use any power supply other than the one supplied with the product. Doing so may cause fire or seriously damage the streamer. Ambient operating temperature 32-104 F/0-40 C at 5-95% non condensing humidity. Voltage 5Vdc, 2.0A Power supply unit This Class III product, VIP7802, shall be powered by the Power Supply that is provided together with the product. Typical power consumption 10W Open Source Software Information For instructions on how to obtain a copy of any source code being made publicly available by ARRIS related to software used in this ARRIS product you may send your request in writing to:

ARRIS, Software Pedigree Operations, 2450 Walsh Avenue, Santa Clara, CA 95051, USA The ARRIS website opensource.arrisi.com also contains information regarding use of open source. ARRIS has created the opensource.arris.com site to serve as a portal for interaction with the software community-at-large. Innovation, Science and Economic Development Canada statement:

This device complies with Innovation, Science and Economic Development Canadas license-

exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference;

and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution:

(i) the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. CANADIAN COMPLIANCE This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations and CAN ICES-003 (B)/ NMB-003(B). Cet appareil numrique de la classe B respects toutes les exigences du Rglement sur le matriel brouilleur du Canada et CAN ICES-003 (B)/

NMB-003(B). Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Caring for the environment by recycling When you see this symbol on an ARRIS product, do not dispose of the product with residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your region. Please recycle product packaging and this document. ARRIS, 3871 Lakefield Drive, Suwanee, GA 30024, USA www.commscope.com VIP7802 2021 CommScope, Inc. All rights reserved. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by CommScope is under license. 618473-001_d APERU DU VIP7802 Panneaux avant / latral LAFFICHAGE DETAT LED BOUTON MULTIFONCTION Panneau arrire Sortie HDMI Pour la connexion un tlviseur (vido numrique 4K, haute dfinition et dfinition standard et audio numrique). Entre rseau ETHERNET Pour une connexion haut dbit lorsquaucun rseau Wi-Fi nest pas disponible. MICRO USB Pour la connexion lalimentation lectrique

(inclus). Consignes de Scurit Importantes Ne placez pas le dcodeur au-dessus ou prs dune source de chaleur externe comme un autre appareil lectronique. En faisant cela, a rduira la dure oprationnelle et peut causer des dommages irrparables ou un mauvais fonctionnement. Nutilisez pas le streamer prs de leau. Veuillez noter que la plage de temprature acceptable doit tre moins de 104 F ou 40C. Faites-en sorte que la zone autour du dcodeur soit bien ventile. Ne jamais utiliser le dcodeur lextrieur. Le dcodeur est conu dtre placer sur une surface horizontale. Nutilisez aucune alimentation autre que celle fournie avec le produit. Cela pourrait causer un incendie ou gravement endommager le dcodeur. Temprature ambiante de fonctionnement 32-104 F/0-40 C 5-95% dhumidit sans condensation. Voltage Lalimentation 5Vdc, 2.0A Le VIP7802 est un produit de classe III et doit tre aliment par le fil dalimentation fourni avec le produit. La puissance consomm 10W Informations sur les logiciels libres VIP7802 2021 CommScope, Inc. Tous droits rservs. Les termes HDMI, interface multimdia haute dfinition HDMI et le logo HDMI sont des marques commerciales ou des marques dposes de ladministrateur de licences HDMI. Fabriqu sous licence octroye de Dolby Laboratories. Dolby, Dolby Audio, Pro Logic et le symbole du double D sont des marques de Dolby Laboratories. La marque et les logos Bluetooth sont des marques dposes appartenant Bluetooth SIG, Inc. et toute utilisation de ces marques par CommScope se fait sous licence. 618473-001_d Pour les directives comment obtenir une copie de tout code source dARRIS accessible au public par rapport au logiciel utilis dans ce produit ARRIS, vous pourrez envoyer votre demande crite ladresse suivante :

ARRIS, Software Pedigree Operations, 2450 Walsh Avenue, Santa Clara, CA 9505, tats-Unis Vous pourrez aussi trouver de linformation quant lutilisation du logiciel libre en consultant le site Web dARRIS http:// opensource.arris.com. ARRIS a cr ce site afin den faire un portail interactif pour toute la communaut logicielle. interfrences susceptibles de perturber les communications radio. Il est toutefois impossible de savoir lavance si lappareil provoquera des interfrences dans telle ou telle situation particulire. Si cet appareil provoque effectivement des interfrences prjudiciables la rception radiophonique ou tlvisuelle, ce que lon peut vrifier en lteignant et le rallumant, lutilisateur est invit les corriger en suivant lune des procdures ci-dessous :

-Rorientez ou dplacez le dispositif et/ou lantenne subissant linterfrence.

-Eloigner lappareil du rcepteur affect par les interfrences

- Connecter lappareil sur un circuit diffrent de celui du rcepteur concern

- Si vous avez besoin daide, veuillez consulter votre prestataire de service Avertissement FCC :

Les changements ou modifications qui ne seraient pas expressment approuvs par la partie responsable de la mise en conformit peuvent annuler le droit de lutilisateur employer lappareil. Cet metteur ne doit pas tre situ prs dune antenne ou dun autre metteur, et il ne doit pas tre utilis conjointement avec de tels appareils. Dclaration de conformit au rglement de la FCC concernant lexposition aux rayonnements :

Cet quipement respecte les limites dexposition aux rayonnements prescrites par la FCC pour les environnements non contrls. Cet quipement doit tre install et utilis de manire ce quil y ait une distance dau moins 20 cm entre la source de rayonnement et lutilisateur. Innovation, Science and Economic Development Canada statement:

Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1) lappareil ne doit pas produire de brouillage;

2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Avertissement:

(i) les dispositifs fonctionnant dans la bande de 5150 5250MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis pour les dispositifs utilisant les bandes de 5250 5350MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;

(iii) pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis

(pour les dispositifs utilisant la bande de 5725 5850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour lexploitation point point et lexploitation non point point, selon le cas;

Dclaration dexposition aux radiations:

Cet quipement est conforme Canada limites dexposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. Dclaration de conformit Canadiennes :

Cet appareil numrique de classe B rpond toutes les exigences du rglement canadien sur les quipements brouilleurs et CAN ICES-003 (B) / NMB-003 (B). espects toutes les exigences du Rglement sur le matriel brouilleur du Canada et CAN ICES-003 (B)/

NMB-003(B). Dclaration de la Commission fdrale des communications Cet appareil a t vrifi et trouv conforme aux limitations relatives aux dispositifs numriques de catgorie B prvues la partie 15 des rglements de la FCC. Ces limitations ont t tablies pour garantir une protection raisonnable contre les interfrences dans les zones rsidentielles. Cet appareil produit, utilise et peut mettre de lnergie radiolectrique et, sil nest pas install ou utilis conformment aux consignes fournies, il peut provoquer des Prendre soin de lenvironnement en recyclant Lorsque vous voyez ce symbole sur un produit ARRIS, ne jetez pas le produit avec les dchets rsidentiels ou commerciaux. Certains pays ou rgions, comme lUnion europenne, ont mis en place des systmes de collecte et de recyclage des dchets lectriques et lectroniques. Contactez vos autorits locales pour obtenir des informations propos des pratiques tablies pour votre rgion. Veuillez recycler lemballage du produit et ce document. ARRIS, 3871 Lakefield Drive, Suwanee, GA 30024, USA www.commscope.com

56.4 mm 36.4 mm MFG PN: 615215-001-00 MODEL: VIP7802 /A600/U802 Serial No: ABCCDDEEFFFF ETH MAC: 00:02:9B:30:00:31 Wi-Fi MAC: 00:02:9B:30:00:32 2020-03 GUID: D535815E-7099-40CB-B2B8-810A39896201 FCC ID:ACQ-VIP7802 IC: 109AS-VIP7802 ARRIS International, plc. INTERNAL ARTWORK,LABEL,POLYESTER, 56.4X36.4MM,VIP78XX, LEAD-FREE / ROHS COMPLIANT VIP7802 610525-001 6 PREPARED BY: JunLu 56.4 mm 36.4 mm FCC ID:ACQ-VIP7802 IC: 109AS-VIP7802 5V ; 2.0A ARRIS International, plc. INTERNAL ARTWORK,LABEL,POLYESTER, 56.4X36.4MM,VIP78XX, LEAD-FREE / ROHS COMPLIANT VIP7802 610525-001 6 PREPARED BY: JunLu FCC ID: ACQ-VIP7802 IC: 109AS-VIP7802

Date: April 21, 2021 Subject: Ad Hoc Mode Function Declaration FCC ID: ACQ-VIP7802 IC: 109AS-VIP7802 To Whom it may concern, We, ARRIS, declare that the device does not support any non-US channels, country code selection, or Channel 12 & 13 in the 2.4 GHz band in all the operational mode(s). Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master device. The device does not support DFS detection capability. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Regards, Jorge Villarreal / Product Compliance Director ARRIS Tel: 215-323-1697 E-mail: Jorge.Villarreal@commscope.com

Date: April 21, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: ACQ-VIP7802 To whom it may concern:

Short-term confidentiality Pursuant to DA 04-1705 of the Commissions pubic notice, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days Internal Photographs External Photographs User's manual Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Jorge Villarreal / Product Compliance Director ARRIS Tel: 215-323-1697 E-mail: Jorge.Villarreal@commscope.com

March 23rd, 2021 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Subject: FCC Attestation for FCC ID: ACQ-VIP7802 To whom it may concern:

We, the undersigned, hereby attest that for all supported bands the partial loading conditions maintain the same PSD as full loading conditions as it relates to the product VIP7802. Sincerely yours, Jorge Villarreal Product Compliance Director ARRIS 215-323-1697 Jorge.Villarreal@commscope.com

Date: 2021/4/21 Subject: Product Certification Representative Authorization Letter Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 FCC ID: ACQ-VIP7802 Product name: VIP7802 To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model VIP7802 to the FCC Rules and Regulations. International Certification Corp. Address :

No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.)

: Gary Chang Name Job Title : Manager e-mail

: garychang@icertifi.com.tw Webs We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Jorge Villarreal / Product Compliance Director ARRIS Tel: 215-323-1697 E-mail: Jorge.Villarreal@commscope.com

Date: April 21, 2021 UNII Declaration Letter We, ARRIS, declare the following information for FCC equipment authorization, Device FCC ID: ACQ-VIP7802

(1) DFS Device --

Client with Radar detection capability, Client without radar detection capability

(2) Active / Passive Scanning, Ad hoc mode access point capability Frequency Band

(MHz) 5150 5250 5250 5350 5470 5725 5725 5850 Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , No No No No passive scanning

(where the device is can listen only with no probes) Yes , Yes , Yes , Yes , No No No No Ad Hoc Mode capability Access point capability Yes , Yes , Yes , Yes , No No No No Yes , Yes , Yes , Yes , No No No No

(3) Country code selection ability -

Yes , No If no, pls explain how was implemented : Proprietary Software is restricted from modification by end user

(4) Meet 15.202 requirement -

Yes , No , pls check below:

A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply ,

(If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) Jorge Villarreal / Product Compliance Director ARRIS Tel: 215-323-1697 E-mail: Jorge.Villarreal@commscope.com