| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Users Manual Part 1 | Users Manual | 1.27 MiB | April 05 2004 | |||
| 1 |
|
Users Manual Part 2 | Users Manual | 1.30 MiB | April 05 2004 | |||
| 1 | Cover Letter(s) | April 05 2004 | ||||||
| 1 | Cover Letter(s) | April 05 2004 | ||||||
| 1 | Cover Letter(s) | April 05 2004 | ||||||
| 1 | External Photos | April 05 2004 | ||||||
| 1 | Internal Photos | April 05 2004 | ||||||
| 1 | ID Label/Location Info | April 05 2004 | ||||||
| 1 | Operational Description | April 05 2004 | ||||||
| 1 | RF Exposure Info | April 05 2004 | ||||||
| 1 | Cover Letter(s) | April 05 2004 | ||||||
| 1 | Test Setup Photos | April 05 2004 | ||||||
| 1 | Test Report | April 05 2004 | ||||||
| 1 | Test Report | April 05 2004 |
| 1 | Users Manual Part 1 | Users Manual | 1.27 MiB | April 05 2004 |
WWiirreelleessss PPrriinntt SSeerrvveerr UUsseerr GGuuiiddee Copyright 2003. ALL RIGHTS RESERVED Document Version: 1.1 P/N: 9570F20201 All trademark and trade names are the properties of their respective owners. Table of Contents Chapter 1 Introduction Chapter 2 LAN Installation Chapter 3 Wireless Print Server Configuration Chapter 4 Client PC Configuration 1 Features......................................................................................................................... 1 Safety Instructions ........................................................................................................ 2 Package Contents.......................................................................................................... 3 Models .......................................................................................................................... 3 LED Indicators ............................................................................................................. 4 Diagnostic Push Button ................................................................................................ 5 6 Procedure...................................................................................................................... 6 8 Overview ...................................................................................................................... 8 Using the Windows Wizard.......................................................................................... 8 11 Overview .................................................................................................................... 11 Windows Peer-to-peer Printing .................................................................................. 13 Windows SMB Printing.............................................................................................. 20 Windows with Server-based Print Queues ................................................................. 21 Macintosh (AppleTalk)............................................................................................... 22 Macintosh OS X ......................................................................................................... 23 24 Requirements.............................................................................................................. 24 Installation .................................................................................................................. 24 Operation .................................................................................................................... 24 38 Overview .................................................................................................................... 38 Preparation.................................................................................................................. 38 Connecting to the Wireless Print Server..................................................................... 39 Configuration Screens ................................................................................................ 39 47 Overview .................................................................................................................... 47 Internet Printing Protocol (IPP) .................................................................................. 47 Internet Mail Printing ................................................................................................. 52 Printing through the Internet....................................................................................... 56 SNMP ......................................................................................................................... 57 58 Overview .................................................................................................................... 58 Page i Chapter 5 BiAdmin Management Utility Chapter 6 Web-Based Management Chapter 8 Troubleshooting Chapter 7 Special Features Appendix A Specifications Appendix B Windows Server Configuration Appendix C Unix Systems Hardware & LAN Problems ....................................................................................... 58 AppleTalk (Macintosh)............................................................................................... 59 Windows Printing Problems ....................................................................................... 61 Unix Troubleshooting................................................................................................. 66 67 General Specifications................................................................................................ 67 Protocol Support......................................................................................................... 68 Feature Support........................................................................................................... 68 69 Windows NT4.0 Server .............................................................................................. 69 Windows 2000/2003 Server ....................................................................................... 70 71 Overview .................................................................................................................... 71 Wireless Print Server IP Address Configuration ........................................................ 71 Other Wireless Print Server Configuration................................................................. 71 LPD Configuration ..................................................................................................... 72 77 Overview .................................................................................................................... 77 Creating an NDPS Manager Object............................................................................ 77 Creating an NDPS Printer Agent................................................................................ 78 Appendix D NetWare Page ii Chapter 1 Introduction This chapter provides an overview of your Wireless Print Server's features. 1 Features Congratulations on the purchase of your new Wireless Print Server. Your Wireless Print Server was designed to provide a simple and efficient network printing solution. It is packed with features, including:
Wireless LAN Support. Wireless stations supporting the IEEE 802.11b standard can interoperate with the Wireless Print Server. Both LAN and WLAN users can print to the attached printer or printers.
Versatility. The Wireless Print Server supports up to four protocols: TCP/IP, SMB
(Service Message Block), AppleTalk (EtherTalk), and NetBEUI. It features an Ethernet interface port and operating system support includes Unix, NetWare (NDPS LPR printing), and Microsoft Windows.
Easy Installation. The Wireless Print Server makes adding printers or plotters to your network simple.
Easy Setup. A number of utility programs are supplied to simplify setup. For Windows 95/98/Me/NT/2000/XP users, the BiAdmin program makes it easy to configure the Wireless Print Server for a variety of network and server configurations.
Web-based Interface. The Web-based interface provides an easy method of configuration in TCP/IP networks to every model.
Compact Size. This allows the Wireless Print Server to be used even where space is limited.
Remote Management Tools. A variety of software tools are provided. In most environments, both the Wireless Print Server and attached bi-directional printers can be configured remotely.
SNMP Support. The Wireless Print Server can act as a SNMP agent, with it own MIB. This allows TCP/IP users to monitor, configure and troubleshoot the Wireless Print Server using their existing SNMP management tools.
Internet Printing Protocol (IPP) Support. The Wireless Print Server can act as an IPP (Internet Printing Protocol) Server, allowing clients, suppliers, colleagues and others to print to your printer from anywhere on the Internet. Windows IPP Client software is also supplied. Refer to the "Protocol Support" and "Feature Support"
tables in Appendix A for details of which models support the different features. Page 1 Safety Instructions For your own safety, and to protect your Wireless Print Server, please observe the following safety advice. 1. Unplug this device from its power source before cleaning. Use only a slightly dampened cloth for cleaning. Do not use liquid or aerosol cleaners. 2. Avoid using this product near water. Exposure to water poses an electric-shock hazard. 3. Do not place the Wireless Print Server on an unstable surface. The device may fall causing serious damage to the device. 4. This device should only be used with the power supply type specified on the marking label. If you are not sure of type of your local power supply, consult your dealer or the local power company. 5. Do not pinch, crimp or otherwise damage the power cord. If exposed to foot traffic, ensures that the cable is properly shielded and does not pose a tripping hazard. If using an extension cord, makes sure the total ampere rating of the products using the cord does not exceed the extension cord's ampere rating. 6. 7. Do not attempt to service this device, as opening or removing casing may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. 8. The Wireless Print Server should be serviced by qualified service personnel under the following conditions:
The power cord is damaged or frayed. Liquid has been spilled onto the product. The product has been exposed to rain or water. The product does not operate normally in accordance with the operating instructions. The device has been dropped or the casing has been damaged. Page 2 Package Contents You should find the following items packaged with your Wireless Print Server. If any items are missing, contact your dealer immediately. The Wireless Print Server Power Adapter One CD-ROM containing all support programs and this manual Quick Install Guide Models This manual covers the following Wireless Print Server models. Details of the LEDs and connections are in this Chapter. Further details of each model are contained in Appendix A -
Specifications. WPS870G Wireless Print Server Note: The parallel port is Port 1, the USB port is Port 2. 1 USB Printer Port 1 Parallel Printer Port IEEE 802.11b Wireless Station 10/100BaseT LAN connection Page 3 LED Indicators All models have four LED indicators on the top. The Error LED is red. The ACT LED is green. The LED indicator modes are described in the following table. Activity Green On Orange On LED Status Ethernet Wireless-G Green Color(s) Green + Orange Off Green + Orange Off Green On Green Blinking Orange Blinking Collision Off Desc. Power Off Device Ready Error No Ethernet Link Ethernet Link Traffic Green On Green Blinking Parallel Port Green + Orange Off USB Port Green + Orange Off Green On Green Blinking Orange On Green On Green Blinking Orange On No Wireless Link. (if wireless initiate failed) 802.11g module is functional. Sending/Receiving No printer is connected Printer is connected. Sending data Problem on printer No printer is connected Printer is connected. Sending data Problem on printer Page 4 Diagnostic Push Button The Wireless Print Server is fitted with a Diagnostic Push Button. The button is recessed; a pin or paper clip can be used to press it. This button has 2 functions:
Restore the factory default settings Print a test page containing all current settings. To restore the factory default settings:
1. Turn the Wireless Print Server OFF. 2. Press and hold the diagnostic button. While pressing the button, switch the Wireless Print Server ON. If you continue pressing the button for 10 seconds, a diagnostic page will be printed, showing the new (default) settings. 3. To generate a Diagnostic print out 1. Ensure that both the Wireless Print Server and the printer attached to port 1 are ON. 2. Press the diagnostic button, and hold it in for 2 seconds. 3. The test page, containing the current settings, will be printed. Note:
PostScript printers are unable to print this page. If you have a PostScript printer on Port 1, the test page will not be printed. Page 5 Chapter 2 LAN Installation This chapter describes how to install the Wireless Print Server in your Local Area Network. 2 Procedure 1. Preparation Ensure the power is OFF. Do not connect the Wireless Print Server while power is On. Find the Default Server Name for your Wireless Print Server. The Default Server Name is shown on a sticker on the base of the device. It consists of 8 letters and/or digits. Record this name; it may be needed during configuration. 2. Connect the Printer or Printers Connect the printer or plotter cable(s) to the appropriate port(s) on the Wireless Print Server unit. Parallel port cables should be less than 3 meters long. 3. Connect to your Network Wired Network Interface Connect the network cable to the 10/100BaseT LAN connector on the Wireless Print Server. To use the LAN interface, the LAN cable needs to be inserted BEFORE powering ON In the default Wireless "Infrastructure" mode, connecting a LAN cable will disable the Wireless interface. To use both the LAN and Wireless interfaces, the Wireless mode must be changed to
"Ad-hoc". Wireless Network Interface Ensure your Access Point is compatible with the Wireless Print Server's default settings:
SSID: ANY WEP: Disabled Because the default Wireless mode is "Infrastructure", you cannot configure the Wireless Print Server via the Wireless interface unless you have an Access Point. 4. Power Up Plug in the power adapter cable and power up. Start-up will take only a few seconds. Use only the Power Supply unit provided with the device. Power Supply units for different models are not interchangeable. Page 6 5. Check the LEDs LAN Installation The Red Error LED should flash, then turn Off. When the Error LED goes off and the ACT LED remains lit or flashes, the Wireless Print Server is ready. If using the LAN interface, the LAN LED should be ON. If using the Wireless interface, the WLAN LED should be ON. Page 7 Chapter 3 Wireless Print Server Configuration This chapter provides an overview of the configuration process. 3 Overview The Wireless Print Server is designed to support many different platforms, and the configuration required would depend upon the environment in which it is installed. The Wireless Print Server usually requires configuration, but if there's a DHCP server on your network, then the device is just plug-and-play. A Windows-based setup Wizard is also provided on the CD-ROM to simplify this task. PCs wishing to use the printer attached to the Wireless Print Server always require configuration. See Chapter 4- Client Configuration for details. If you wish to use a queue-based printing system using Windows NT Server/Windows 2000/Windows XP, the Network Server must be configured as detailed in Appendix B -
Windows Server Configuration. However, it is not necessary to use a Network Server-
based queue; client PCs can print directly to the Wireless Print Server using the Peer-to-
peer Printing installed by the User setup option on the CD-ROM. Configuration Methods The following methods are available to perform the required Print Server configuration:
Windows-based Wizard - see below for details. BiAdmin management utility program - see Chapter 5 for details. Web-based setup - see Chapter 6 for details. Advanced Configuration and Management The BiAdmin management utility is provided for advanced configuration and management. This program is installed by default when the Administrator install option is chosen. See Chapter 5 for details on using BiAdmin. Using the Windows Wizard The Windows-based Wizard is supplied on the CD-ROM, and runs on Windows 95, 98, NT4.0, ME, Windows 2000 and Windows XP. Using this Wizard is the recommended method to configure the Print Server. It can be used configure the Wireless Print Server for your Network environment, even if the Print Server does not have a valid IP address. Procedure 1. Insert the supplied CD-ROM into your drive. If the setup program does not start automatically, run SETUP.exe in the root folder. 2. On the first screen, shown below, click Setup Wizard. Page 8 Figure 1: Wireless Print Server Screen 3. Click Next on the first screen of the Wizard, to view a list of Wireless Print Servers on your LAN. 4. Select your new Wireless Print Server, then click Next to continue. 5. Enter the required data on the following screen. Name of the Print Server can be changed if you wish. Comment is optional. Select or enter the Workgroup name for this Wireless Print Server. 6. Click Next to configure the TCP/IP Screen:
Select Obtain IP Address automatically if your LAN has a DHCP Server, otherwise select Fixed IP Address. For Fixed IP Address, enter an unused address from the range used on your LAN, or click the Suggest New Values Button. Use the same Network Mask and Gateway as PCs on your LAN. 7. On the Wireless Screens, the settings should be set to match your other Wireless Stations. For details about each setting, refer to the following section Wireless Configuration. 8. Click Finish to save the data to the Wireless Print Server. Note: To install the Wizard on your PC, use the "Installation" option. If the desired Wireless Print Server is not listed:
Check all cables to the Wireless Print Server. Check the Wireless Print Server's LEDs:
The Error LED should be OFF and the ACT LED should be ON or flashing. The LAN LED should be ON. Check that your PC and the Wireless Print Server are on the same LAN segment. (If you don't have a Router or Gateway on your LAN, you only have 1 segment.) Check that your PC has either the TCP/IP or NetBEUI network protocols installed. See Checking your Network Protocols on page 12 for details. Page 9 Wireless Configuration Wireless Mode The Wireless Print Server is a Wireless station, NOT an access point. Like other Wireless stations, they have 3 modes:
802.11 Ad Hoc mode - no Access Point is used, Wireless stations communicate directly with each other. This is the current standard. Ad Hoc mode - no Access Point is used, Wireless stations communicate directly with each other. This is the older standard, and requires that each Wireless station is set to use the same Channel. (In 802.11 Ad-hoc mode, a Wireless station will scan all channels to find compatible ad-hoc groups it can join.) Of the two (2) Ad-hoc modes, "802.11 Ad Hoc" mode is recommended. If your Wireless LAN Card doesn't provide "802.11 Ad Hoc" mode, try "Ad Hoc" mode on the PC and "802.11 Ad Hoc" on the Wireless Print Server. If this fails, select "Ad-hoc"
mode on the Wireless Print Server. Infrastructure (Default) - all Wireless stations connect to the Access Point. This allows connection to both other Wireless stations and the wired LAN. To use both the LAN and Wireless interfaces, the Wireless mode must be set to "Ad-hoc". In "Infrastructure" mode, connecting a LAN cable will disable the Wireless interface. Required Configuration SSID Channel Infrastructure Mode Must match the Access Point. Access Point sets the Channel used. Wireless stations automatically locate the correct channel. Ad-hoc Mode 802.11 Ad-hoc Mode If 802.11 Ad Hoc mode is configured, the Wireless Print Server will join any group with the same SSID. If there's no Ad Hoc group available on the environment, the Wireless Print Server will create the group by the SSID number value it configured. In Ad Hoc mode, the Wireless Print Server will join any group with the same Channel number. In 802.11 Ad Hoc mode, the Print Server will scan all Channels to look for compatible groups it can join. If there is no existing Hoc group available, the Wireless Print Server will create the group using its own Channel number. WEP Settings Must match the other Wireless stations. Must match the Access Point. Page 10 Chapter 4 Client PC Configuration The chapter details the client configuration required on LAN clients to use the printer or printers attached to the Wireless Print Server. 4 Overview Before performing client configuration, the Wireless Print Server must be installed on your LAN, and configured as described in Chapter 3. Both the Wireless Print Server and the attached printer must be powered ON. Printing Methods The Wireless Print Server supports a number of printing methods:
Peer-to-peer Printing means that the print jobs are stored (queued) on your PC, and sent directly to the Wireless Print Server when it is available. Server-based Print Queue means that all print jobs are stored (queued) on the Network Server (e.g. Windows NT/2000) and then sent to the Wireless Print Server. This allows the Network Administrator to modify the Print Queue. For example, an important job can be moved to the head of the queue. Windows SMB printing is a Microsoft standard for using a "Network Printer". No additional software needs to be installed on your Windows PC, and printing from MS-
DOS programs is supported. However, because the Wireless Print Server can not store files, large print jobs may cause problems. AppleTalk is also supported, and normally no configuration of the Wireless Print Server is required. See the Macintosh section of this chapter for details of client configuration. Which printing method should I use?
If using Windows 95, 98, NT, Me, 2000, or XP, the easiest method to use is Peer-to-peer Printing. If using Windows, and you need to print from MS-DOS programs, or you don't wish to install additional software, use SMB. However, SMB is not suitable for large, complex documents, so if you need this as well as MS-DOS printing, you should install BOTH Peer-to-peer Printing and SMB printing. MS-
DOS programs can use the SMB printer, Windows programs should use Peer-to-peer Printing. If your LAN has Network Servers (e.g. Windows NT, Windows 2000 Server) use the method advised by your Network Administrator. The Wireless Print Server can print via a queue located on a Network server, if desired. Unix users - refer to the Appendix C. Macintosh users - refer to the Macintosh section of this chapter. Page 11 Checking your Network Protocols (Windows 9x) Your PC must have EITHER the TCP/IP or NetBEUI protocols installed. (All versions of Windows after Windows 95 have TCP/IP installed by default.) If using the Peer-to-peer Printing, the installation program will check this for you. If using other methods, you must check manually, as follows:
1. Select the Settings - Control Panel - Network option on the Start Menu. You should see a screen like the one following:
Figure 2: Network Configuration The top line in the list (NetBEUI -> PCI Fast Ethernet Adapter) indicates that the NetBEUI protocol is installed on this PC. Your PC will show the name of the your Network card rather than "PCI Fast Ethernet Adapter". 2. 3. The highlighted line (TCP/IP -> PCI Fast Ethernet Adapter) indicates that TCP/IP is installed. Your PC will show the name of the your Network card rather than "PCI Fast Ethernet Adapter". If neither line is present:
Install the NetBEUI protocol by selecting Add - Protocol - Microsoft - NetBEUI - OK. You may be prompted for your Windows CD-ROM. If required, you can also install TCP/IP. However, depending on your LAN environment, TCP/IP may require further configuration. If either protocol is already installed, proceed with installation. Page 12 Windows Peer-to-peer Printing With this printing method, print jobs are stored (queued) on your PC, and then sent to the Wireless Print Server when it is available. Figure 3: Peer-to-Peer Printing Windows 2000 & XP require no additional software. For other versions of Windows, the supplied PTP (Peer-to-Peer) Printer Port software must be installed on each PC. Windows 2000/XP Setup The recommended printing method is to use LPR, as follows:
1. 2. Select the Ports tab and click the Add Port button. Open your Printers folder, right-click the desired printer and select Properties. Figure 4: Printer Ports Screen Page 13 3. Choose Standard TCP/IP Port, then click New Port. Figure 5: Add Port Screen 4. On the Add Standard TCP/IP Printer Port screen above, enter the IP Address of the Print Server in the Printer Name or IP Address field, then click Next. Figure 6: Additional Port Information Screen 5. On this screen, select Custom, and click the Settings button. Page 14 Figure 7: Port Settings Screen 6. On the Port Settings screen, shown above:
Select LPR in the Protocol section Enter a Queue name (L1 for Port 1, L2 for Port 2 if the Wireless Print Server has 2 printer ports) Ensure the LPR Byte Counting Enabled setting is Enabled. Click OK to confirm your changes and close this screen. 7. Follow the prompts to complete the Wizard. Page 15 Windows 9x/ME Setup Before performing the following procedure, the Wireless Print Server must be installed on your LAN, and configured as described in Chapter 3. Both the Wireless Print Server and the attached printer should be powered ON. 1. Insert the supplied CD-ROM into your drive. If the setup program does not start, run SETUP.exe in the root folder. 2. Click Installation button, then select the User Install. Figure 8: Installation Screen 3. Follow the prompts to complete the installation of the Peer-to-peer Printer Port Driver.
(Refer to the Windows section of Chapter 8 - Troubleshooting if there is a problem with the installation.) 4. The Print Driver Setup will then run. In future, you can use Start - Programs - PrintServer Driver - Printer Port Setup to run the program again. PTP Printer Port Setup 1. The program will search for Printer Servers on the network, and a screen like the following will be displayed. If desired, click Refresh. The name of the attached printer will be displayed if possible. If "No printer" is displayed, check that the printer is properly connected and powered on. Page 16 Figure 9: Print Port Setup (Peer-to-peer Printing) If your Wireless Print Server is not listed:
Click the "Refresh" button. Check that both the Wireless Print Server and the printer are properly connected, and powered on. Check that the Wireless Print Server has been configured. (Use the Setup Wizard on the CD-ROM.) If using TCP/IP, try installing the NetBEUI protocol. (See the earlier section Checking your Network Protocols for details.). Then try again. 2. Select the desired port on a Wireless Print Server, then click Next. A pop-up message will inform you if the port has been created successfully. If you see the following error message, either install Internet Explorer 4 or later, or follow the procedure in the "Trouble Shooting - Windows" section of Chapter 8. 3. The printer port will be created, then a screen like the following will be displayed. Page 17 Figure 10: Configure Printer Port 4. Select the correct Windows printer in the Existing Printers list, and click the Connect button. If the correct printer type is not listed, click "Add New Printer" to run the Windows Add Printer wizard. Step through the Wizard and install the required printer:
Select the correct Printer Manufacturer and Model, or use the "Have Disk" option if appropriate. We recommend changing the Printer name to indicate which device is on.
(e.g. HP2100 on SCA43600_P1) If prompted about Sharing the printer, do NOT enable Sharing. When the Printer installation is finished, it will be listed in the Configure Printer Port screen above. Select it and click Connect. 5. Installation is now complete. You can now print using this printer. To install additional Printers, repeat steps 4. Use the Start menu to run this program in future. The default installation is Start -
Programs - PrintServer Driver - Print Driver Setup. Note:
If using the Epson Spooler Manager, this program must be disabled, as follows:
1. Run the Epson Spooler Manager. 2. Select "Queue Setup" from the menu. 3. Click "Use Print Manager for this port". 4. Click "OK" to exit. Management Print jobs can be managed like any Windows printer. Open the Printers folder (Start -
Settings - Printers) and double-click any printer to see the current print jobs. If the printer attached to the Wireless Print Server is changed, just run this program again, and select the correct printer. To delete a port created by this setup program, use the Windows Delete Port facility:
Right-click any printer in the Printers folder, and select Properties. Page 18 Locate the Delete Port button. This button is on the Details or Ports tab, depending on your version or Windows. If the Wireless Print Server's IP Address is changed, and you can no longer print, delete the port (see procedure above) and re-install it. Advanced Port Options The options for the Peer-to-peer Printing are accessed via the Port Settings button. Use Start - Settings - Printers to open the Printers folder, then right-click the Printer, and select Properties. The Port Settings button is on the Details or Ports tab, depending on your version of Windows. An example screen is shown below:
Figure 11: Port Settings (Peer-to-peer Driver) Items shown on this screen are as follows:
Port Banner Retry Interval If desired, click Browse to select a different Wireless Print Server. If the selected device has multiple ports, the Select Device Port button can be used to select the port. The Port Name can not be changed after installation. This name is shown in the Printer's Properties. Check this option to print a banner page before each print job. The User Name will be printed on the banner page. Sets how often Windows will poll the Wireless Print Server to establish a connection when the printer is busy. Increase this value if you get too many warning messages. If using a PostScript Printer, check the PostScript box. Page 19 Windows SMB Printing This method requires no additional software to be installed, but the NetBEUI or TCP/IP protocol must be installed on your PC. Use the following procedure to install the Wireless Print Server's printer as a Windows SMB network printer:
1. Double-click the Network Neighborhood icon on the desktop. 2. On the View menu, select Details. 3. Locate the desired Wireless Print Server, as shown below:
If it is the same Workgroup as your PC, it will be listed on screen. If it is in a different workgroup, double-click Entire Network, then double-click the appropriate Workgroup to open it. Figure 12: Network Neighborhood 4. Double-click the Wireless Print Server icon to view a Printer icon for each printer port. The "Comment" field may indicate what type of printer is connected to the port. 5. To install a printer, right-click the desired printer icon, and choose "Install", as shown below. This will start the Add Printer wizard. Figure 13: Install SMB Printer 6. Follow the prompts to complete the installation. For information about the question "Do you print from MS-DOS programs?", see Printing from MS-DOS Programs below. Select the Printer Manufacturer and Model to match the printer connected to this port on the Wireless Print Server, and complete the Wizard. 7. This printer will now appear in your Printers folder (Start - Settings - Printers) and can be used like any other printer. However, SMB printing is not suitable for large complex print jobs - you should use the Peer-to-peer Printing instead. Page 20 Windows with Server-based Print Queues With a Server-based Print Queue, the Print Server is installed on an existing Network Server
(Windows, Unix, or NetWare), rather than on your PC. If your Network Administrator uses this system, each Windows client must be set up as follows:
1. Open your Printers folder, and start the Add Printer Wizard. 2. When prompted, select Network Printer. 3. When prompted for Network Path or Queue Name:
On Windows 98/ME, click the Browse button On Windows 2000/XP, leave the field blank and click Next Figure 14: Network Path - Windows 98/ME Figure 15: Network Path - Windows XP 4. Browse the network, and locate the Server and Printer (or Print Queue) which your Network Administrator advised you to use. 5. Click OK, then Next. 6. Select the correct printer Manufacturer and Model, as advised by your Network Administrator, and click Next. 7. Follow the prompts to complete the Wizard. The new printer will be listed with any other installed printers, and may be selected when printing from any Windows application. Page 21 Macintosh (AppleTalk) The Wireless Print Server supports AppleTalk (EtherTalk), PAP, ATP, NBP, ZIP and DDP protocols, enabling Macintosh computers on the network to view and use the Wireless Print Server as a regular AppleTalk printer. Normally, no configuration is required. Software Requirements System 9.x OS or newer. AppleTalk Setup 1. Click the apple icon and choose Control Panel - AppleTalk. 2. Ensure that Ethernet is selected under AppleTalk Connection. 3. Click Chooser. The Chooser panel will open. 4. Click on either the LaserWriter 8 icon (recommended) or the LaserWriter 7 icon. LaserWriter 8 makes use of the fonts installed in the printer itself, so the printing response time is quicker. LaserWriter 7 uses the fonts installed in the computer, which increases network traffic and takes more printing time. 5. Choose a PostScript printer from the list. 6. Click Create and it will search PPD automatically. 7. Select a printer description from the list. 8. Click Select. Configuration is now complete. Printing Printing with the Wireless Print Server installed in an AppleTalk network is identical to normal printing. Just select File - Print and choose the desired printer. Advanced Setup and Management In a mixed Windows PC/Macintosh environment, you can use BiAdmin to configure the Wireless Print Server. See Chapter 5 for details on installing and using BiAdmin. Page 22 Macintosh OS X If using LPR printing, you need to ensure the Wireless Print Server has a valid IP address before configuring your Mac as follows. LPR printing Setup 1. Select the Printer List icon. Figure 16: Printer List 2. Click the Add Printer button. 3. Choose LPR Printers Using IP. Figure 17: LPR Screen 4. Enter the IP address of the Print Server in the LPR Printer's Address field, and enter the Queue Name (L1 for port 1, L2 for port 2 if the Wireless Print Server has 2 printer ports.). 5. Select the Printer Model from the drop-down list. 6. Click Add. Configuration is now complete. Page 23 Chapter 5 BiAdmin Management Utility This chapter describes the installation and operation of the BiAdmin Configuration &
Management program. 5 Requirements This program requires:
Windows 95, Windows 98 or ME Windows NT 4.0, Windows 2000 or XP Additional Recommendations:
Screen resolution of 800 * 600 or greater. Installation Use the supplied CD-ROM. This CD-ROM will usually auto-run. If auto-run is disabled on your PC, run the SETUP.exe program in the root folder. Select Installation and this will give you the options for BiAdmin installation BiAdmin is always installed if the Administrator option is chosen. If using the Custom option on the CD-ROM, select BiAdmin. Operation Start the program by using the icon created by the setup program. When run, the program searches the network for all active Wireless Print Servers, then lists them on screen, as shown by the example screen below. Main Screen Figure 18: BiAdmin Main Screen Page 24 Device List The left panel displays a list of all Wireless Print Servers found on the network. When a Wireless Print Server is selected from the list, its details are displayed in the right panel. Note: If the IP address is "Null", please click the Refresh icon to get the value again. If the desired Wireless Print Server is not listed, try the following:
Check that the device is installed and ON, then Refresh the list. If the Wireless Print Server is on another LAN segment, use the InitDevice - Attached Remote menu option to locate and display the Wireless Print Server. Icons Device Status Menu equivalent: Main - Device Status All of the settings for the current device are displayed in a read-only scrollable list in the left panel. You can use the "Save to File" and "Restore to Device" buttons on this screen to save a copy of the selected device's CONFIG file to your PC, or restore a previously saved file to the selected Wireless Print Server. Printer Status Menu equivalent: Main - Printer Status After selecting this icon, a Detail button will be available to show more information about the printer. Page 25 Select the desired port from the drop-down list to display the current status of the printer attached to the port. Possible states are:
Status - On-line, Off-line, or Out of Paper Printing Information - Idle, Printing If the printer is Bi-directional, and is not busy, the Configuration button will be available, allowing you to change the configuration of the attached printer. This button will be grayed out if the printer does not support this option, or if the printer is busy printing. Configuration Menu Equivalent: Main - Configure This option allows you to configure the selected Wireless Print Server. See the following section for details. Wizard This Wireless Print Server Wizard allows you to do the basic configuration for the selected device. The screens are similar to the Wizard run from the CD-ROM, as described in Chapter 3. Upgrade Menu Equivalent: Main - Upgrade This option allows you to upgrade the firmware for the selected Wireless Print Server. Before using this option, you need to obtain the .BIN file for the firmware upgrade, and copy it to the same directory as BiAdmin. Refresh Menu Equivalent: Main - Refresh Select this icon to update the Wireless Print Server device listing after changing the name or IP Address. Exit Menu Equivalent: Main - Exit Exit the BiAdmin program. This does not save any changes you have made; you must Save to Device on each screen. Page 26 Menus Main Menu Device Status Printer Status Configure Upgrade Refresh Exit InitDevice Menu Reset Device Restore to Factory Default Attached Remote Connected Protocol Same as Device Icon. Same as Printer Status Icon. Same as Configure Icon. Same as Upgrade Icon. Same as Refresh Icon. Same as Exit Icon. This will cause the device to reboot. This should be done after making any configuration changes, or if the device stops responding after some problems. This will restore ALL device values to their factory defaults. To restore only the current screen, use the Set to Default button on the screen. This is used to connect to a Wireless Print Server device on another LAN segment. You need to know the IP address of the remote Wireless Print Server. If your LAN does not have a Router, you can ignore this option. This option allows you to designate which LAN protocol will be used for communication between the selected device and this application. You should select ONE protocol only. Diagnostics menu Print Test Page Use this option to print a test sheet from the selected Wireless Print Server port. The test print out will include status information. Configuration When the Configuration icon is clicked, or the Configure option on the Main menu is selected, a tabbed window will open. The tabs available will vary depending on the Wireless Print Server model selected. The possible tabs are:
System TCP/IP AppleTalk NetBEUI Port Wireless SNMP Internet Printing Page 27 System Tab This screen allows you to:
Change the name of the Wireless Print Server. Change the "Password" for the Wireless Print Server. Set the Network Protocols used the selected Wireless Print Server. (Any protocols not used on your LAN may be disabled. This may improve performance.) Figure 19: System Screen Page 28 TCP/IP Tab Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options are:
Dynamic IP Address (DHCP) - The IP address is obtained automatically, from a DHCP Server on your network. Fixed IP Address - You must enter the IP address, Subnet Mask, and Gateway Address. IP Address - Select an unused IP address from the address range used on your LAN. Subnet Mask - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router). Gateway - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router). Some Wireless Print Server models also support the Auto-IP function. If the Wireless Print Server is set to Dynamic IP Address, but there's no DHCP server found on the network, the Wireless Print Server will get an IP from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even though the Wireless Print Server was initialized with an Auto-
IP, it will change to DHCP whenever a DHCP server is detected. Figure 20: TCP/IP Screen The TCP session parameters should only be changed if advised to do so by your Network Administrator or Print Server Technical Support. Page 29 AppleTalk Tab Generally, no Wireless Print Server configuration is required in order to use AppleTalk. This screen allows you to:
Set the Zone Name field to determine which Apple systems can gain access to this printer. The Printer Type field is used to describe the printer driver used for each port. Set Communication Protocol to ASCII or Binary. This must match the setting on the Apple computer systems using the Wireless Print Server. Figure 21: AppleTalk Screen Page 30 NetBEUI Tab This screen allows you to:
Choose the Domain name for the selected Wireless Print Server. Set how fast jobs are sent to the printer by using the Response Time field. Set the desired option for the Abort Job if Error Occured setting. YES causes a print job to be terminated if a printing error occurs. NO (default) will try to continue but may cause print errors. Figure 22: NetBEUI Screen Page 31 Internet Printing Tab The Internet Printing feature available on some models, allows you to send print jobs to the Print Server using Internet E-mail. Please see Internet Mail Printing Configuration for details of using this feature. Figure 23: Internet Printing Screen Page 32 Port Tab This screen has 2 panels - Physical Port and Logical Port. Physical Port The following settings are available:
Selected Physical Port - Select the Physical Printer Port you wish to configure. Handshake Signal - Select Busy Only or Busy & Ack for the Physical Port. Printer Type - Select High Speed or Low Speed for the Printer Type. Logical Port Logical Ports (printers) can be used in the Unix environment. The following settings are available:
Selected Logical Port - Select the Logical Printer Port you wish to configure. Map to Physical Port - Select the physical Printer Port which the Logical printer will use. Convert LF to LF+CR - If checked, LF (line feed) characters are changed to CR+LF
(carriage return + line feed). Prefix of Job - The printer control string (in hex) to be sent to the printer before each print job. This string cannot exceed 15 characters. Suffix of Job - The printer control string (in hex) to be sent to the printer after each print job. This string cannot exceed 15 characters. Figure 24: Port Screen The Get Defaults button will reset all settings to their factory-default values. Page 33 Wireless Tab This tab will be displayed if the selected device has the capability to serve as a Wireless Stations for your LAN. Figure 25: Wireless Screen Change the settings to suit your environment. Generally, you must match the settings of other
'Wireless stations. The available settings are described below. Selected Device SSID Channel No This shows the name of the Print Server. If using an ESS (Extended Service Set, with multiple access points) this ID is called an ESSID (Extended Service Set Identifier). To communicate, all Wireless stations MUST use the same SSID/ESSID. Change this value, or change the other Wireless stations, to ensure each Wireless station has the same value. The default value is "null", so the Wireless station can join any Ad-hoc group. Note! The SSID is case sensitive. The effect of this setting depends on the Network Type setting:
In Infrastructure mode, this setting has no effect. The Channel is selected automatically, to match the Channel used by the Access Point. In Ad hoc mode, all Wireless stations MUST use the same Channel number. In 802.11 Ad-hoc mode, Wireless stations will scan all Channels looking for compatible groups to join. The Channel setting is used as a default Channel. If you experience interference (shown by lost connections and/or slow data transfers) you may need to experiment with different channels. Page 34 Network Type WEP Encryption WEP Disable/
Enable WEP Authentication 64 Bits/128Bits Key Table Default Key Select the correct value for your Wireless LAN. 802.11 Ad-hoc mode is used when there is no Wireless Access Point, and each Wireless station communicates directly with other Wireless stations. This is the current standard, and should be used if possible. Ad-hoc mode is used when there is no Wireless Access Point, and each Wireless station communicates directly with other Wireless stations. This is the older standard. Infrastructure mode is used when each Wireless station connects to the Wireless Access point. This also provides access to the wired LAN. If Disabled (default), data is NOT encrypted before being transmitted. If Enabled, you must provide either the 64 Bit key table or the 128 Bit keys. The key is used to encrypt the data before transmission. Options are "Open System" or "Shared Key". Select the method (Open System or Shared Key) used by other Wireless Stations. Shared Key is more secure than Open System. Select "64Bits" or "128Bits" as required to match other Wireless stations on your WLAN. Stations which do not have matching settings will be unable to communicate. 128 bit Keys are more secure than 64 bit Keys. Enter the key values to match other Wireless stations on your WLAN. This table is used when Encrypting and Decrypting data. All stations always transmit data encrypted using their default key (see below). The key number (1, 2, 3, 4) is also transmitted. The receiving station will use the key number (1, 2, 3, 4) to determine which key value to use for decryption. If the key value does not match the transmitting station, decryption will fail. The easiest way to ensure there are no problems is to have every Station, including the Access Point, use the same key table (all entries identical). Then, it does not matter which key is used as the default key. Select the key you wish to be the default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. Page 35 Wireless Link Info Screen After clicking the "Link Info" button on the Wireless Screen, a screen like the example below will be shown. Figure 26:Link Info Screen State Current Channel Current TX Rate Throughput (Tx ) Throughput ( Rx ) Link Quality Signal Strength This indicates which access point is currently in use. The current channel which has been used. The current transmitting speed. This will show how much data has been transmitted per second. This will show how much data has been received per second. This indicates the quality of the Wireless connection This indicates the strength of the Wireless signal being received. The "Link Quality" and "Signal Strength" data is not available if using "Ad-hoc" or "802.11 Ad-hoc" mode. Page 36 SNMP Tab Configuration is only required if using the Simple Network Management Protocol. Refer to Configuring the Wireless Print Server for SNMP in Chapter 7 for details. Figure 27: SNMP Screen Page 37
| 1 | Users Manual Part 2 | Users Manual | 1.30 MiB | April 05 2004 |
Chapter 6 Web-Based Management 6 This chapter explains how to use your Web Browser to configure the Wireless Print Server models Overview The Wireless Print Server models incorporate the HTTP server. This allows you to connect to the Wireless Print Server and configure it using your Web Browser. Most browsers should work, provided they support tables and forms. Preparation Because it supports dynamic IP Address allocation using DHCP, BOOTP, or RARP, the Wireless Print Server ships with an IP Address of 0.0.0.0. This is NOT a valid IP Address. Therefore, you must do ONE of the following:
Check your DHCP server (if you have one), and determine the IP Address allocated to the Wireless Print Server. Use the Diagnostic Button (if fitted) to print a report which includes the current IP address. (Press the Diagnostic Button, and hold it for 2 seconds.) Use the Setup Wizard, BiAdmin or another Wireless Print Server utility to allocate a Add an entry to the arp table to associate the hardware address of the Wireless Print valid IP Address to the Wireless Print Server. Server with the desired IP address, as follows:
arp -s IP_Address 00:c0:02:xx:xx:xx (Unix) arp -s IP_Address 00-c0-02-xx-xx-xx (Windows) Where:
IP_Address is the IP Address you wish to assign to the Wireless Print Server. 00:c0:02:xx:xx:xx is the hardware address of the Wireless Print Server. Example (Unix):
arp -s 192.168.0.21 00:c0:02:12:34:56 Example (Windows):
arp -s 192.168.0.21 00c002123456 Note: The hardware address of the Wireless Print Server is shown on a sticker on the base of the device. Page 38 Connecting to the Wireless Print Server 1. Start your Web Browser. 2. In the Address box, enter HTTP:// followed by the IP Address of the Wireless Print Server. e.g. http://192.168.0.100 3. You will then be prompted for the password. If no password has been set, just press ENTER. 4. Use the menu bar on the top of the screen to move about. Remember to save each screen before changing to a different screen. Configuration Screens Depending on your models, the Web-based interface may look different to the images shown in the User's Manual. The functions have not changed, and the description of each setting is correct. Only the appearances are different. AppleTalk Figure 28: AppleTalk Screen AppleTalk zone Printer Object Type Communication Protocol This determines which Apple systems can gain access to this printer. These are text fields, used to describe the printer driver used for each port. The Wireless Print Server is designed to work with LaserWriter (or 100% compatible) printers. Sets whether the port uses ASCII or Binary Communication Protocol.. The default is Binary. Page 39 NetBEUI Domain Name Response Time Figure 29: NetBEUI Screen Enter the designated work group to be serviced by the Wireless Print Server. This field is not case sensitive, so names with different case will be considered to be the same name. Set how fast jobs are sent to the printer. The default value of zero
(0) delay should be increased only if your printer cannot cope with no delays. Abort Job if Error YES terminates a print job if a printing error occurs. NO (default) will try to continue but may cause print errors. If print errors occur, try setting this value to YES. Page 40 SNMP (Simple Network Management Protocol) The SNMP screen may not be available. Check the Feature List table in Appendix A -
Specifications to see if SNMP is available for your model If available, the screen will look like the following example. Figure 30: SNMP Screen Text Field - Name of the contact person. Text Field - Location of the contact person. SysContact SysLocation Management Stations Station No. IP Address Community Access Trap Receivers Receiver No. IP Address Community Select the Management station (1..4), and click the Get Data button to update the display for the selected item. Enter the IP Address of the management station, which has the SNMP program installed. This is a text field. Enter the name of the community. Select the desired level of access. Select the Trap Receiver number (1..4), and click the Get Data button to update the display for the selected item. Enter the IP Address of the Trap Receiver, which will be sent the Trap message. This is a text field. Enter the name of the community. Page 41 Enable Check to enable; select the severity level. Note: Currently, all traps are level 1. For more information about using SNMP, see Chapter 7 - Special Features. TCP/IP Figure 31: TCP/IP Screen IP Address assigned to this device. If using dynamic IP Addresses
(DHCP, BOOTP, rarp), this should be left at 0.0.0.0. If the Router (Gateway) Address is 0.0.0.0, the Subnet Mask should also be left at 0.0.0.0. If you have a router, enter the Subnet mask for the segment to which the Wireless Print Server is attached. If your network segment has a router or gateways, enter its IP Address here. Otherwise, leave the address as 0.0.0.0. Sets how long the Wireless Print Server should wait before retrying a TCP/IP connection which is lost. Allowable values are from 0 to 255 seconds, with 2 as the default. Set how many attempts at reconnection will be made. After that, the TCP/IP session will be terminated. Allowable values are from 0 to 255, with 254 as the default. IP Address Subnet Mask
(Network Mask) Gateway Address Connection Delay before reconnection attempts Number of reconnection attempts Page 42 Configure Server Figure 32: Configure Server Screen Print Server Name Change the default name if you wish. The new name must not Password Enable Protocols contain any spaces or blanks. Enter the device password, and again in the Verify field. Once a password is entered, it is required in order to gain access and change the configuration. Non-TCP/IP may be disabled if they are not required on your LAN. The available protocols depend on the Print Server model. Page 43 Wireless Configuration The settings on this screen must match the other Wireless stations in order for communication to occur. Figure 33: Wireless Screen Page 44 Configuration Regulatory Domain Station name SSID
(ESSID) Channel No. Network Type It is illegal to use this device in any location outside of the regulatory domain. This is the same as the Device (Host) Name on the WAN screen. On your PC, some Wireless status screens may display this name as the Access Point in use. To communicate, all Wireless stations MUST use the same SSID/ESSID. The default value is null. Note! The SSID is case sensitive. Select the value you wish to use on your Wireless LAN. If you experience lost connections and/or slow data transfers you may need to experiment with different channels to see which is the best. Select the correct value for your Wireless LAN. 802.11 Ad-hoc mode is used when there is no Wireless Access Point, and each Wireless station communicates directly with other Wireless stations. This is the current standard. Ad-hoc mode is used when there is no Wireless Access Point, and each Wireless station communicates directly with other Wireless stations. This is the older standard. Infrastructure mode is used when each Wireless station connects to the Wireless Access point. This also provides access to the wired LAN. Click this button will open the sub screen. Link Info Button WEP Data Privacy Off 64 Bit Encryption If OFF (default), data is NOT encrypted before being transmitted. If selected, data is encrypted, using the default key, before being transmitted. The receiving station must be set to 64 Bit Encryption, and have the same Key value in the same position in its key table. Otherwise, it will not be able to decrypt the data. Default Key Select the key you wish to be the default. Transmitted data is ALWAYS encrypted using the Default Key; the other Keys are for decryption only. Key Table:
This table is used when Encrypting and Decrypting data. All stations, including this Access Point, always transmit data encrypted using their default key. The key number (1, 2, 3, 4) is also transmitted. The receiving station will use the key number (1, 2, 3, 4) to determine which key value to use for decryption. If the key value does not match the transmitting station, decryption will fail. The easiest way to ensure there are no problems is to have every Station, including the Access Point, use the same key table (all entries identical). Then, it does not matter which key is used as the default key. Page 45 128 Bit Encryption WEP Authentication If selected, data is encrypted using the key before being transmitted. The receiving station must be set to use 128 Bit Encryption, and have the same Key value. Otherwise, it will not be able to decrypt the data. Key Enter the key value you wish to use. Other stations must have the same key Options are "Open System" or "Shared Key". Some Wireless cards do not support both methods. Check your Wireless card's documentation to determine the correct value. Ensure that all Wireless stations use the same setting as the Access Point. Other Screens Server Status This screen shows server system data and the current settings for all of the other screens. It is read-only; no data can be input on this screen. Printer Ports This screen displays the current status of each port. For each port, the following data is listed:
Connected Printer- the model name of the printer connected to the port, if the printer name is known. (If the printer is not bi-directional, this information is unavailable.) Status - the current status of the printer (On-line, Off-line, Out of paper) Printing Information - this will show either Idle or Printing. Logical Printers Logical Printers (ports) can be used under Unix. For each Logical Printer, the following fields are available:
Logical Printer
(Port) Port Pre-string Post String Convert LF to CR+LF Select the Logical Printer Port you wish to configure. (e.g. L1) Click the Get Data button to update the display with the current data for the selected logical printer. Select the Printer Port which the Logical printer will use. The printer control string (in hex) to be sent to the printer before each print job. This string cannot exceed 15 characters. The printer control string (in hex) to be sent to the printer after each print job. This string cannot exceed 15 characters. If checked, LF (line feed) characters are changed to CR+LF (carriage return + line feed). Internet Printing See Internet Mail Printing in Chapter 7 for details of this feature. Page 46 Chapter 7 Special Features This chapter covers the special features of the Wireless Print Server. 7 Overview IPP (Internet Printing Protocol). Your Wireless Print Server may have three (3) special features:
Proprietary Internet Mail Printing system. SNMP (Simple Network Management Protocol) Check the Feature Support table in Appendix A - Specifications to see which features your model supports. Internet Printing Protocol (IPP) IPP (Internet Printing Protocol) is a standards-based system to allow remote printing from a PC to any accessible printer. Normally, the printer will be attached to a computer or other device which functions as an IPP Server. Client PCs need a compatible IPP Client program. Windows 2000 and XP include a suitable IPP client. For other versions of Windows, a client program is supplied on the Print Server's CD-ROM. The Client must also know the IP Address or URL or the IPP Server. IPP Server Configuration The Print Server contains the necessary firmware to act as an IPP Server. No additional configuration is necessary. However, the following requirements must be met. The Print Server must have a valid IP Address. For printing via the Internet, the Print Server's IP Address must be external (allocated by your ISP), rather than an IP Address on your local LAN. Any Router, Gateway or Firewall linking your LAN to the Internet must NOT block the IPP protocol. You must advise clients of the correct URL or IP Address of the IPP Server. To use a URL rather than an IP Address, you need to register the domain name for the URL. Unless clients are using Windows 2000 or XP, you must provide your clients with the supplied IPP Client software. If it is not convenient to provide the CD-ROM, supply the IPP_CLIENT.EXE file, located in the IPP folder. Page 47 IPP Client Setup - Windows 98/ME For these platforms, IPP Client software is supplied on the CD-ROM. Also you can distribute the setup program (IPP_CLIENT.EXE) to users vial E-mail. Installing from the CD-ROM 1. Insert the CD-ROM in your drive. If the program does not start automatically, run the SETUP program in the top-level folder. 2. Follow the prompts until you reach the Select Installation screen, and select IPP Client. 3. At the next screen, select the Install IPP Client option. 4. Click Next, and step though the remaining screens to complete the installation. Installing using IPP_CLIENT.EXE 1. Run this program to unzip the included files. 2. The IPP Setup program will then run. 3. Follow the prompts to complete the installation. IPP Client Configuration 1. Run the "Add IPP Port" program entry created by the installation. A screen like the following will be displayed. Figure 34: IPP Port 2. If Internet access from your location is via a Proxy Server, check Access IPP Server via Proxy Server, and enter details of your Proxy Server. (This will be the same as your Browser configuration.) 3. Enter the IP Address or URL of the IPP Server. 4. Click Select Device Port to view the available ports on the IPP Server, and select the appropriate port. A connection to the IPP Server will be established at this time. 5. Click Save to create the IPP port on your system. You will see a message confirming that the port has been created, then the following dialog:
Page 48 Figure 35: Select Printer for IPP Port 6. Either select an existing printer to use the new port, and click OK. OR Click the Add New Printer button to create a new printer to use the IPP port. This will start the Add Printer wizard. Follow the prompts to complete the process. Ensure that the new printer uses the IPP port. Installation is now complete. To create additional IPP Ports, repeat the entire procedure. The Proxy Server and other options are set individually for each IPP Port. Changing the IPP Port Settings After the IPP port is created, you can reach the screen shown in Figure 34: IPP Port using the Windows Port Settings button:
1. Open the Printers folder (Start - Settings - Printers) 2. Right-click the IPP Printer, and select Properties. 3. Locate and click the Port Settings button (Details or Port tab, depending on your version of Windows). There are 2 settings - Retry Interval and Retry Count - which can be adjusted if you have problems connecting to the IPP Server. Retry Interval sets the time interval (in seconds) between connection attempts. Increase this number if you have a poor connection, or the remote server is very busy. Retry Count sets how many connection attempts will be made. Increase this number if you have a poor connection, or the remote server is very busy. Page 49 IPP Client Setup - Windows 2000/XP Windows 2000 and XP have their own IPP Client, and there is no need to install the supplied IPP Client Software. To use the Windows IPP Client with the Print Server, follow this procedure:
1. Start the Add Printer wizard. 2. Select Network Printer, and click "Next" to see the Locate your Printer screen, as shown below. Figure 36: Windows 2000 - Locate your Printer 3. Select Connect to a printer on the Internet or on your Intranet, and enter the URL of the IPP Server as follows, where ip_address represents the IP Address of the IPP Server, and 631 is the port number. Port 1 Port 2 (if exists) ip_address:631/ipp/P1 ip_address:631/ipp/P2 4. These entries are case sensitive. They must be entered as shown, with "ipp" in lower case, and P1 and P2 in UPPER case. If the connection can be established, and the printer on that port is on-line, the following dialog will be displayed. Figure 37: Windows 2000: No printer driver Page 50 5. Click "OK", and then select the printer manufacturer and model to match the printer connected to the port on the IPP Server. 6. Click "Next", and complete the Wizard. The IPP printer is now ready for use. Using IPP Printers The IPP Printer can be selected and used like any other Windows printer. If the IPP Server is not on your network, your Internet connection needs to be active. If using the supplied IPP Client software, you can use the Query IPP Printer program installed with Add IPP Port to check the availability of the remote IPP Server. An IPP Server may be unavailable for any of the following reasons:
A printer problem has caused the IPP Server to cease responding, and a restart (reboot) is It is powered off. required. The Server's IP Address has changed. The Internet connection for the IPP Server is down. Network congestion causes the connection attempt to time out. If using the supplied IPP Client software, there are 2 settings - Retry Interval and Retry Count -
which can be adjusted if you have problems connecting to the IPP Server. See the previous section Changing the IPP Port Settings for details. Page 51 Internet Mail Printing The Internet Mail Printing System allows users to print data to your printer across the Internet. Users send the Internet Wireless Print Server an E-Mail, with the print job normally sent as an attachment to the E-Mail. The Wireless Print Server will retrieve the E-Mail and print it. System Requirements Mail Server Accessibility. The Mail Server must be accessible by the intended clients or users. Normally, this means a permanent connection to the Internet. Protocols. The Mail Server must support the POP3 and SMTP protocols. The Internet Printing System uses these protocols and the most common E-Mail formatting standards:
MIME (Multipurpose Internet Mail Extensions) Base64 Encoding (for mail attachments) Internet Wireless Print Server TCIP/IP Protocol. The LAN must use the TCP/IP protocol. Mail Server Access. The Wireless Print Server must be able to access the Mail Server using a single IP address. Mail Account. The Wireless Print Server must have a Mail Account. Users print by sending an E-Mail to this mail account. User (Client) Requirements E-Mail address. This is used to notify the user that their print job has been done, or if Internet Connection. Either through a LAN, or dial-up. there any problems. Printer Driver. Users must have a printer driver which matches the printer connected to the remote Internet Wireless Print Server. Print Capture Software. To print more than plain text, users require InterNet Printing Port software to capture the print job and convert it into an E-Mail attachment. The Internet Printing Port software is available for the following operating systems:
Microsoft Windows 95, 98, or ME Microsoft Windows NT 4.0, Windows 2000, or XP. Page 52 Internet Mail Printing Configuration The Wireless Print Server must be configured with the data in the following table. The supplied BiAdmin utility program, or the Web interface (on 100BaseT models) can be used to set the following entries on the TCP/IP screen. Mail Server IP Address Mail Account Mail Account Password Check Mail Interval Redirect Mail Account Default Printer Port Printer Model Print every E-Mail Print Banner Mail Response when Printed The IP Address of the E-Mail Server used by the Wireless Print Server. The name of the E-Mail Account used by the Wireless Print Server. Enter the password for the above Mail Account here. Sets how often to check for mail. Jobs which can not be printed will be sent to this account. If blank, unprintable jobs will be discarded. Printer number for all Internet print jobs. Only one port can be selected. Users on the LAN can also use this port. This text field identifies the printer used for Internet printing. This value is sent to remote users upon request. If ON, then all E-Mail received is printed. Otherwise, only E-Mail from the InterNet Printing Port will be printed. If YES (default), a banner page is printed to identify the owner of the print job. If YES, all print jobs receive an E-Mail response. If NO, only users who set this option in their InterNet Printing Port software receive an E-Mail. Page 53 User Software The software provided for remote users (InterNet Printing Port) should be installed by everyone intending to use Internet printing. Otherwise, remote users can print correctly only if:
They send an E-Mail directly to the Wireless Print Server Mail Account, using their normal E-Mail application. The E-Mail contains plain text only. The Internet Wireless Print Server is configured with Print every E-Mail ON. Installation of the InterNet Printing Port software will create a new printer port. After attaching the correct printer to this port, users can print to the Internet Printer using any Windows application. Installation - User Software 1. Run the InterNet Printing Port installation program SETUP.EXE 2. Default values for the installation are:
Directory - C:\Program Files\Internet_Printer Start Menu folder - InterNet Printing Port Driver 3. You will then see the Configure Port screen, as shown in the following screenshot. Figure 38: InterNet Printer Port 4. The following data must be provided. Port Name Enter a descriptive name (e.g. "WAN") for the new printer port. Page 54 Remote Printer E-mail Address Mail Server Name or IP Address Your Internet E-mail Address Retry Interval
(Seconds) Reply Notification Mail The E-Mail address for the Internet printer. Your print jobs will be sent to this E-Mail address. This is the name or IP Address of your Mail Server. If you are on a LAN, ask the LAN Administrator. If using a dial-up connection, use the data provided by your ISP. The normal address that people use to send you E-mail. If unable to connect to the E-Mail server, retry after this time period (1 to 255 seconds, 30 is usually OK). Check to receive an E-Mail when your print job has been processed. 5. On completion, a new printer port will have been created. Using the new Port The Windows Control Panel is used to connect the correct printer to the InterNet Printing Port. In Windows 95/NT, the procedure is:
1. Select the Printer which matches the remote printer, then choose Properties, as shown in the example below. Figure 39: InterNet Printer Properties 2. Select the new port - WAN (InterNet Printer) in the example - as the port for this printer. If you do not have the correct printer driver, or you wish to create another printer using an existing driver, use the Windows Add Printer facility. Using the Windows Port Settings or Configure Port facility will reveal the same Configure Port screen shown in Figure 38: InterNet Printer Port. If you wish to print to multiple Internet Printers, use the Windows Add Port facility to add a new InterNet Printer port. Ensure that the correct data is entered in each port, and that each port has a unique name. Page 55 Checking the Printer Driver To make sure that the correct printer driver for the remote printer is installed on your system, you can use the InterNet Printing Port to send an E-Mail to the Internet Printer. The procedure is as follows:
1. Connect your default printer to the InterNet Printing Port. 2. Check that "Reply Notification Mail" in the InterNet Printing Port is ON. 3. From Notepad or another text editor, print a short message (e.g. "This is a test print") to the Internet Printer. You will receive a reply E-Mail containing the "Printer ID" which will identify the printer attached to the Wireless Print Server. If this does not match the printer driver you are using, install the correct printer driver. Printing through the Internet 1. Create or open the document you wish to print. 2. Select the Printer connected to the InterNet Printing Port. 3. If you do not have a permanent Internet connection, establish a connection now. (Note:
The InterNet Printing Port will NOT establish a dial-up connection, but it will send the E-
Mail the next time you are connected.) 4. Print the document. 5. The InterNet Printing Port will generate an E-Mail and send it to the remote printer. The document will be encoded and sent as an attachment to the E-Mail. You will see a progress screen similar to the example below:
Figure 40 InterNet Printing Progress 6. Close the Internet connection if you opened it in Step 3. 7. If the "Notify after print job" option is set, you will receive an E-Mail when your job is printed. Page 56 SNMP SNMP (Simple Network Management Protocol) allows network supervisors to monitor and control the Wireless Print Server using network management platforms such as HP OpenView, IBM SystemView, etc. The appropriate MIB file must be imported into your SNMP management program using the Import-Compile command. Check your management program for details on this procedure. The MIB files are provided in the Mib folder on the CD-ROM, as follows:
Mib1p.mib Mib2p.mib Single port models. Models with 2 ports Configuring the Wireless Print Server for SNMP Before using a SNMP Management station to manage the Wireless Print Server, the following settings should be assigned to it, in addition to the IP Address, Gateway Address, and Subnet Mask. SNMP Settings SysContact SysLocation Management Station IP Address(s) Trap Receiving IP Address(s) Text Field - Name of the contact person. Text Field - Location of the contact person. Up to 4 Management Stations can be entered. Up to 4 Trap Receiving Stations can be entered. Management Station Settings For each Management Station, the following fields are available:
Access Permission Options are:
Read Only Read/Write Not Accessible Community String Leaving this blank will disable management by this station. Trap Receiving Station Settings For each Trap Receiving Station, the following fields are available:
Community String Leaving this blank will disable management by this station. Trap Enable Use this option to Enable/Disable Trap Receiving by this station. Trap Severity In this version, all traps are level 1. Page 57 Chapter 8 Troubleshooting This chapter describes some problem situations, which may arise, and the solutions to them. 8 Overview If you encounter printing difficulties, please refer to the appropriate section. If, after following the advice in these documents, the Wireless Print Server still does not function properly, please contact your dealer for further advice. Hardware & LAN Problems Problem No. 1 Solution No. 1 Problem No. 2 Solution No. 2 Problem No. 3 Solution No. 3 All the Wireless Print Server's LEDs are off. Check the power supply or power connection. Wireless Print Server's RED status LED continuously stays on. Reset the Wireless Print Server by unplugging the power supply and plugging it back in. The Wireless Print Server unit can not be found on the LAN, so configuration is not possible. If using the Wireless Interface Ensure that WEP is disabled on your other Wireless stations. If using "Ad-hoc" mode, it is not possible for Wireless stations to connect to the Wireless Print Server, because its default mode is
"Infrastructure". You must use the wired interface for initial configuration. If using "Infrastructure" mode, ensure that your Access Point allows connection by Wireless stations with a SSID of ANY. The Access Point itself has a blank (null) SSID. If there is a setting "Broadcast SSID" or "Allow SSID of ANY", this setting should be Enabled. If using the Wired 10/100BaseT interface:
Check the Hub. The link LED for the port to which the Wireless Print Server is connected should be ON. If it is Off, there is a problem in the network cable. On the Wireless Print Server, check the LAN LED. If the LED is not ON, the network connection is not working. Notes:
a) To use both the Wireless and LAN interfaces, the Wireless mode must be set to "Ad-hoc". b) You must Power Off the Wireless Print Server before connecting or disconnecting the LAN cable. If using TCP/IP:
Page 58 Problem No. 4 Solution No. 4 Ensure that there are no routers between the Wireless Print Server and the PC used for configuration. Ensure that the PC used for configuration has the TCP/IP network protocol installed. Test its network connection by seeing if you can locate other LAN devices from the PC. (e.g. Use Network Neighborhood and try to browser the network.) I am using DHCP, and getting an IP Address conflict involving the Wireless Print Server. If the Wireless Print Server is left on, but the DHCP server is turned off, then the Wireless Print Server will retain its IP Address without the DHCP Server being aware of it. Simply reset the Wireless Print Server so it will obtain a new IP Address. This problem would also arise if you assigned static IP Address, which is within the range used by the DHCP server. If so, use another address which is NOT within the range used by the DHCP server. AppleTalk (Macintosh) Problem No. 1 Solution No. 1 Problem No. 2 Solution No. 2 Why do I get an incorrect printout?
Some possible reasons are:
You may have chosen Binary encoding to print the file. Try to use ASCII encoding. Some of the fonts, which are in your print file may not be supported by the printer. Try selecting LaserWriter 7 instead of LaserWriter 8. Can't find the Wireless Print Server's name in the Chooser. Try the following:
1. Make sure that AppleTalk is on (the button next to Active is highlighted in the Chooser). 2. Make sure the printer has been on and in the READY state for a few minutes. 3. Make sure the printer has not been renamed since its last 4. appearance in the Chooser. If the printer resides on a network with multiple zones, make sure the correct zone is selected from the AppleTalk Zones box in the Chooser. Problem No. 3 Solution No. 3 Problem No. 4 Solution No. 4 My EPS file doesn't print with the correct fonts. This is a problem that occurs in some application programs. Try downloading the fonts contained in the EPS file before printing the saved EPS file. I can't select the "Remaining from:" item in the print dialog box. If you have selected the Layout value, "2 Up", or "4 Up", you cannot access the Remaining from item. Choose other selections. Page 59 Problem No. 5 Solution No. 5 Problem No. 6 Solution No. 6 Problem No. 7 Solution No. 7 A cover page prints either on the first or the last page of the document. Select one of these solutions:
Turn the cover page feature off. Insert extra page breaks in your document to avoid the cover page printing on the first or last page of your document. The colors on my printed output do not match the colors on my computer screen. When the printer receives a color file, it tries to match the printed output color to the screen color. Sometimes the printer cannot match up the colors as closely as wanted. To alleviate this problem, perform the following steps:
Choose "Calibrated Color/Grayscale" in the Print pop-up menu in the Print Options dialog box. The printer will make adjustments to match the colors. Check your monitor to make sure all settings (for example, brightness) are adjusted correctly. When I send a print job, I get a PostScript Command error or no print out. Check the communication protocols. The computer, Wireless Print Server and printer must all be configured to the same communication protocol.(either Binary or ASCII). To configure your system:
1. Choose which protocol you are going to use. You should check your printer; it may not give you a choice. 2. Set your printer to the correct protocol. 3. Use the computer's Print submenu to configure your computer to use the protocol you have chosen. 4. Configure the Wireless Print Server to use the same protocol as the printer and computer. Page 60 Windows Printing Problems Solution No. 1 Problem No. 1 When I tried to install the Printing software for Peer-to-Peer printing, I received an error message and the installation was aborted.. This may be caused by an existing installation of the printer port software. Before attempting another installation:
Remove the existing installation Restart your PC To remove an existing printer port installation:
1. Open Start - Settings - Control Panel - Add/Remove Programs 2. Look for an entry with a name like "Shared Port", "Shared Printer Port", "Print Server Driver" or "Print Server Port". 3. Select this item, click "Add/Remove", and confirm the deletion. Problem No. 2 On Windows 98, I installed the Print Port Driver for Peer-to-Peer Printing, but when I selected a port on a Wireless Print Server and clicked "Add", the printer was not installed. Try installing the Printer using the standard Windows tools, as follows:
1. Start the Add Printer Wizard. 2. Select Network Printer when prompted "How is the printer attached Solution No. 2 to your Computer?", and click Next. 3. When prompted for the Network Path or Queue, enter a dummy value such as shown below. (Do NOT select Yes for "Do you print for MS-DOS programs?") 4. The printer wizard will display a message stating that "The Network Printer is off-line". This is OK. Continue the Add Printer Wizard until finished. If prompted about sharing the printer, do NOT enable Sharing. 5. Go to the Printers folder (Control Panel-Printers). The printer icon will be grayed out indicating the printer is not ready. 6. Right-click the Printer, and select Properties. Then select the Details tab, as shown below. Page 61 7. Click the Add Port button. On the resulting screen, select Other, then Printer Server, as the port to add, as shown below. 8. Click OK to see the Print Port Configuration screen, as shown below. Page 62 9. Click the Browse Device button, select the desired Wireless Print Server, and click OK. 10. Click OK to return to the Printers folders, and right-click on the Printer. Ensure that the Work off-line option is NOT checked. Problem No. 3 Solution No. 3 The Printer should no longer be grayed out, and is ready for use. Note: The screens shown above are from Windows 98. Other versions of Windows may look slightly different, but the process is identical. I have a Windows-only printer, and when I tried to install the Peer-
to-Peer Print driver on Windows 98/ME, installation failed. Some Windows-only printers cannot be networked. If a Windows-only printer cannot be installed using the Windows "Add New Printer"
wizard, but only by using a program provided by the printer manufacturer, then it probably can't be networked. If the printer can be networked, the normal installation should work, but you could also try the procedure described above (Problem 2). Page 63 Solution No. 4 Problem No. 4 Using Windows 2000/XP, I installed the printer using LPD as recommended, but I can't print. Check that the correct Printer driver is being used. Try disabling the Bidirectional printing support, as follows:
1. Open the Printers folder. 2. Right-click on the Printer, and select Properties. 3. Select the Ports tab. 4. Uncheck the Enable bidirectional support checkbox. Problem No. 5 When printing from some software applications such as Power Solution No. 5 Point, it takes a long time and the print out is incorrect. The problem is due to the printer, which is being configured to Start printing after the first page is spooled. To change this setting:
Go to Control Panel - Printers and click on your printer. Then select File - Properties - Details. When the Details screen appears, click the Spool Settings button. When the Spool Settings dialogue box appears, choose Start printing after last page is spooled and click OK. Problem No. 6 Solution No. 6 The Configuration button on the Printer Status screen in BiAdmin is grayed out, even though my printer is bi-directional. The button is unavailable if the printer is busy. You must wait until the printer is idle. Page 64 Problem No. 7 My old printer cannot print or prints garbage. Solution No. 7 If the printer you used is an old model with low speed, the following steps may solve this problem:
Try the following:
Open the BiAdmin Utility. Click the Printer Status icon. Change the Printer Type setting to Low Speed or set the Handshake Signal setting to Ack & Busy. Problem No. 8 How Do I Print to the Wireless Print Server's printer from a MS-
Solution No. 8 DOS program. You need to set the MS-DOS program to use LPT1 (parallel port 1) then
"Capture" the output and re-direct it to the Wireless Print Server. Windows 98/ME 1. Select Start - Settings - Printers to open the Printers folder. 2. Right-click the Wireless Print Server's Printer, and select Properties 3. On the Details tab, click the Capture button to see the Capture Printer Port button, shown below. 4. On this dialog:
Select the Device, normally LPT1 (parallel port 1). Enter or select the Path to the printer:
\\printer_name\P1 Where printer_name is the actual name of your printer. e.g.
\\SC3000014\P1 Check the Reconnect at logon checkbox. If this is not done, the capture setting will be lost when Windows is restarted. Windows 2000/ME 1. Login as Administrator. 2. Open the command prompt window. 3. Enter the following command:
net use lpt1 \\printer_name\P1 /persistent:yes Where printer_name is the actual name of your printer. e.g. net use lpt1 \\SC3000014\P1 /persistent:yes To terminate this capture, use the following command at the command prompt:
net use lpt1 /delete Page 65 Unix Troubleshooting Problem No. 1 Solution No. 1 Problem No. 2 Solution No. 2 Print Server device is not recognized. Check the following:
The network cable is OK. There are no routers between the Print Server and the UNIX host during IP address assignment. There are no NetWare File Servers without TCP/IP support between the Print Server and the UNIX host. You have used the correct hardware address, as shown on a sticker on the base of the device. Use the ping command to see if the Print Server is a valid device on the network. The Print Servers IP address is forgotten and it needs to be installed in a new environment. Use the "Reset" button to restore the factory default settings, as described below, then configure as for a new device. 1. Turn the Print Server OFF. 2. Press and hold the diagnostic button. While pressing the button, switch the Print Server ON. If you continue pressing the button for 10 seconds, a diagnostic page will be printed, showing the new (default) settings. 3. Page 66 A Appendix A Specifications General Specifications WPS870GWireless Print Server Power Consumption External Power Adapter LEDs Parallel Port USB Port (1.1) Ethernet Connector FCC / CE 5.5w max. 12V DC 4 1 Centronic female DB-25 connector 1 10/100BaseT FCC, CE. Class B Environmental Specifications (all Models) Operating Temperature Storage Temperature Shipping Temperature Operating Humidity Storage Humidity Shipping Humidity 0 ~ 40C
-10 ~ 70C
-40 ~ 70C 10 ~ 80%
5 ~ 90%
5 ~ 100%
Parallel Port Pin Assignments Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18-25 Signal Name
- Strobe
+Data 0
+Data 1
+Data 2
+Data 3
+Data 4
+Data 5
+Data 6
+Data 7
- ACK
+ Busy
+ Paper End
+ Select
- Auto Feed
- Error
- Init
- Select In GND Direction To printer To printer To printer To printer To printer To printer To printer To printer To printer To Server To Server To Server To Server To printer To Server To printer To printer Ground Page 67 Protocol Support Model WPS870G TCP/IP NetBeui AppleTalk Feature Support Model HTTP Setup E-mail Printing IPP Support SNMP Support AutoIP WPS870G Page 68 Appendix B Windows Server Configuration B Windows NT4.0 Server If using Windows Windows NT 4.0, Microsoft TCP/IP Printing Support must be installed. Otherwise, install TCP/IP printing support, then add a TCP/IP Remote Printer. If it is already installed, add a TCP/IP Remote Printer, as described below. Adding TCP/IP Printing Support 1. Go to Start-Settings-Control Panel-Network. 2. Click the Service option and ensure that Microsoft TCP/IP Printing is enabled. If it is not enabled, select the Add option and enable it as usual. If you added services in step 2, reboot the computer for the changes to take affect. 3. Adding a TCP/IP Remote Printer 1. Go to Start-Settings-Printer and invoke the Add Printer wizard. 2. When prompted with This printer will be managed by, select My Computer and click Next. 3. Select Add Port, then select LPR Port and click New Port. 4. In the Name of Address of server providing lpd: Dialog box, enter the Wireless Print Server's IP address. In the Name of printer or print queue on that server dialog box, enter the appropriate logical printer number (e.g. L1) as previously configured on the Wireless Print Server. By default, L1 is port 1, and L2 is port 2 if the Wireless Print Server has 2 printer ports. 5. 6. Click OK. When returned to the Printer Ports window, simply select Close and then install your printer driver as usual. 7. When prompted whether or not the printer will be shared, select the Sharing radio button. 8. In the Shared dialog box, enter the shared printer name. (The shared name is how other users will see this printer.) Click OK to save and exit. Client PCs can now be configured as described in Chapter 4 - Client Configuration. Page 69 Windows 2000/2003 Server 1. Start the Add Printer Wizard, select Network Printer, then click Next to browse for the Wireless Print Server. 2. Locate and double-click the Wireless Print Server, select the desired port, and click Next. A message like the following will be displayed:
Figure 41: Windows 2000 Message Figure 42: Windows2003 Message 3. Click "OK", and select the correct Manufacturer and Model for this printer. 4. Follow the prompts to complete the installation. 5. In the Printers folder, right-click the new printer, and select Sharing. Select "Shared As:" and enter an appropriate name for this printer. Users will see this name when browsing for the printer during installation. If desired, click "Additional Drivers" and install printer drivers for other versions of Windows, such as Windows 98. This will assist users during the installation process. 6. Click OK to close this Window. Configuration is now complete. Client PCs can now be configured as described in Chapter 4 - Client Configuration. Page 70 Appendix C Unix Systems Overview C Your Wireless Print Server supports the LPD Unix printing method, which is supported by all common Unix systems. You must configure both the Wireless Print Server itself and your Unix system, as described in the following sections. Wireless Print Server IP Address Configuration Because it supports dynamic IP Address allocation using DHCP or BOOTP, the Wireless Print Server ships with an IP Address of 0.0.0.0. This is NOT a valid IP Address. Therefore, you must do ONE of the following:
Check your DHCP server (if you have one), and determine the IP Address allocated to the Wireless Print Server. Configure your BOOTP Server (if you have one), to provide an IP address to the Wireless Print Server, then restart the Wireless Print Server. Use a Windows platform and run the Setup Wizard or BiAdmin utility to allocate a valid Add an entry to the arp table to associate the hardware address of the Wireless Print IP Address to the Wireless Print Server. Server with the desired IP address, as follows:
arp -s IP_Address 00:c0:02:xx:xx:xx Where:
IP_Address is the IP Address you wish to assign to the Wireless Print Server. 00:c0:02:xx:xx:xx is the hardware address of the Wireless Print Server. Example arp -s 192.168.0.21 00:c0:02:12:34:56 You should then assign this IP address to the Wireless Print Server using your Web Browser, as described in Chapter 6 - Web-based Management. Note:
The hardware address of the Wireless Print Server is shown on a sticker on the base of the device. Other Wireless Print Server Configuration The recommended method to configure the Wireless Print Server is to use the Web-based interface, as described in Chapter 6 - Web-based Management. Ensure that the TCP/IP settings are correct for your network. The logical printers (e.g. L1) must be configured correctly to match your system. Page 71 LPD Configuration Configuration for the most common platforms is described below. LPD on IBM AIX 4.15 Before proceeding, ensure that the Wireless Print Server has been assigned an IP Address. To setup your AIX system for LPD printing, perform the following steps. 1. Add the Wireless Print Server to /etc/hosts.lpd, using the name you assigned to the Wireless Print Server. 2. Start the LPD daemon if it is not running, using the following command:
start src -s qdaemon 3. Start the system administration tool smit and select Print Spooling. 4. Create the required number of queues (one for each logical printer) by selecting:
Add a Print Queue Remote (Printer attached to Remote Host) Standard Processing 5. Use the following information:
Field Name of queue to add Entry Use a single-word queue name, which indicates which printer is attached. Hostname for remote server Wireless Print Server name as used in Name of queue on remote server Type of print spooler on remote server
/etc/hosts.lpd. Logical printer number (e.g. L1) to service this queue. Use default value. (AIX Version xxx) 6. Ensure that the logical printers are configured in the Wireless Print Server. 7. Print using the following command:
lp -d printer_queue file_name Where printer_queue is one of the entries used in Name of queue to add. file_name is the file you wish to print. Page 72 LPD on System V Before beginning LPD Setup, ensure that an IP Address has been assigned to the Wireless Print Server. Keep the following points in mind:
The remote host name is the name of the Wireless Print Server. The remote printer name is the print queue name for the Logical Printer. Logical printers also need to be configured on the Wireless Print Server itself. If your UNIX asks for the LPD type, be sure to identify the service type as BSD. The Wireless Print Servers LPD protocol meets BSD system standards. In the sample commands shown, printer_name is the name of the Print Queue serviced by the Wireless Print Server, and Spooler_directory is the name of the directory, which is used to spool the print jobs. Procedure Action Stop Print Services Add a System Printer Restart the Print Services Enable printing to the new printer device Start accepting jobs for the new printer device Create a spooling directory Make spooling daemon the owner of this directory Create read/write permissions Give permissions to LPD processes. Add remote printer(s) Sample Command
/usr/lib/lpshut
/usr/lib/lpadmin -p printer_name -v /dev/null
/usr/lib/lpsched enable printer_name accept printer_name mkdir /usr/spool/Spooler_directory chown daemon /usr/spool/Spooler_directory chmod 775 /usr/spool/Spooler_directory chgrp daemon /usr/spool/Spooler_directory See following section Adding Remote Printers A remote printer is added by inserting the following line in the /etc/printcap file. The entry is really one line, but can be entered as shown. Use a TAB character where shown. Printer_name|Remote_Printer_Alias:\
[TAB] :lp=:\
[TAB] :rm=PS_NAME:\
[TAB] :rp=Logical_Printer_name:\
[TAB] :sd=Spooler_directory:\
[TAB] :mx#0:
Page 73 Where:
Printer_name is the Print Queue name used to store jobs for the corresponding logical printer. PS_NAME is the Wireless Print Server name defined in /etc/hosts. Logical_Printer_name is the logical printer name on the Wireless Print Server. (e.g. L1) Spooler_directory is the directory you created in Step 6. Example:
Marketing|RP1_PS123456:\
[TAB] :lp=:\
[TAB] :rm=PS_Rm203:\
[TAB] :rp=L1:\
[TAB] :sd=/usr/spool/Marketing:\
[TAB] :mx#0:
Repeat this process for each Logical Printer/Print Queue combination that you wish to create. LPD on Linux If using the command line, the procedure is the same as for System V. (above) On recent Linux distributions, you can use the graphical X-windows interface instead of the command line. The procedure is described below, but may vary according to your version of Linux. 1. Start your X-windows shell. 2. Select Control Panel, then Printer Configuration. 3. Select Add. For the printer type, select Remote Unix (lpd) Queue. 4. Use the following data to complete the resulting dialog. Field Name Spool Directory File Limit Remote Host Remote Queue Data Enter a name for this printer
/var/spool/lpd/name_of_printer 0 (no limit) Name or IP Address of Wireless Print Server e.g. SC3000014 Note: host file entry is required to use the name instead of IP Address Ln Where n is the Logical Printer number By default, L1 is port 1, and L2 is port 2 if the Print Server has 2 ports. 5. Save this data, and exit the Printer Configuration. Configuration is now completed, and the printer is now available for use. Page 74 LPD on BSD Before continuing, ensure that an IP Address has been assigned to the Wireless Print Server. Remember the following:
The remote host name is the name of the Wireless Print Server. The remote printer name is the logical printer (e.g. L1) on the Wireless Print Server. If asked for the LPD type, enter the service type as BSD. In the sample commands shown, printer_name is the Print Queue serviced by the logical printer on the Wireless Print Server, and Spooler_dir is the name of the directory, which is used to spool the print jobs. Procedure Action Create a spooling directory Set spooling daemon as owner of this directory Create read/write permissions Give permissions to LPD processes Add remote printer(s) Start lpc print mechanism Sample Command mkdir /usr/spool/Spooler_dir chown daemon /usr/spool/Spooler_dir chmod 775 /usr/spool/Spooler_dir chgrp daemon /usr/spool/Spooler_dir See below lpc start printer_name Adding Remote Printers A remote printer is added by inserting the following line in the /etc/printcap file. The entry is really one line, but can be entered as shown. Use a TAB character where shown. Printer_name|Remote_Printer_Alias:\
[TAB] :lp=:\
[TAB] :rm=PS_NAME:\
[TAB] :rp=Logical_Printer_name:\
[TAB] :sd=Spooler_directory:\
[TAB] :mx#0:
Where:
Printer_name is the Print Queue name used to store jobs for the corresponding logical printer. PS_NAME is the Wireless Print Server name defined in /etc/hosts. Logical_Printer_name is the logical printer name on the Wireless Print Server. (e.g. L1) Spooler_directory is the directory you created in Step 6. Page 75 Example:
Marketing|RP1_PS123456:\
[TAB] :lp=:\
[TAB] :rm=PS_Rm203:\
[TAB] :rp=L1:\
[TAB] :sd=/usr/spool/Marketing:\
[TAB] :mx#0:
Repeat this process for each Logical Printer/Print Queue combination that you wish to create. Printing using LPD For LPD printing instructions, refer to your UNIX manual. The following example is for a BSD system:
lpr -P printer_name filename Where:
printer_name is the name of the Print Queue defined on the Unix host. filename is the name of the file you wish to print. Example:
lpr -P Marketing /etc/hosts In the above example, the /etc/hosts file is sent to the printer queue Marketing. It will then be sent to the logical printer associated with this queue. Page 76 Appendix D NetWare D Overview The Print Server must be configured as a valid device on your TCP/IP network. This printing method uses LPR over TCP/IP, not the Netware protocol. To use NDPS (Novell Distributed Printing Services), the Novell server must be running Novell NetWare 5, and the PCs (clients) must be running IntranetWare Client V2.2. or later. The following procedure is designed to enable Public Access Printing under NDPS. Public Access Printing allows anybody on the network to access the printer. Creating an NDPS Manager Object If an NDPS Manager Object already exists, skip this procedure and proceed to Creating an NDPS Printer Agent. 1. Login to NetWare 5.0 Server as Admin and start the NetWare Administrator program Nwadmn32.exe. 2. Select the container on NetWare Administrator where you want the NDPS Manager object to reside. (e.g. TeSupp) 3. Select Create - Object from the menu bar to view the New Object dialog. 4. Select NDPS Manager as the object to create. The Create NDPS Manager Object window shown below will appear. Figure 43: Create NDPS Manager Object 5. Type a name in the NDPS Manager Name.(e.g. SerMGR in Figure 1 above) 6. Browse the Resident Server and select where you want the NDPS Manager object to be assigned. (e.g. TECH_50.TeSupp in figure 1 above) 7. Browse the Database Volume and select where you want the NDPS Manager database to be assigned. (e.g. TECH_50_SYS.TeSupp in figure 1 above) 8. Click Create. The new NDPS Manager will appear in the main browser window. Page 77 To start the NDPS Manager in future, enter the following command at the console:
LOAD NDPSM then select the NDPS Manager object. To start the NDPS Manager whenever you bring up the server, add a command like the following to your server's AUTOEXEC.NCF file:
LOAD NDPSM SerMGR.TeSupp The last item is the name of the NDPS Manager object you wish to load. 9. After creating an NDPS Manager, you can create NDPS printers by using NetWare Administrator, as explained below. Creating an NDPS Printer Agent To create Public Access Printers using the NDPS Manager Object in NetWare Administrator, follow this procedure:
1. Start the NDPS Manager object you will be using to control the Printer Agent. 2. At the Identification page, click the Printer Agent List. 3. Click New to see the Create Printer Agent window, as shown below. Figure 44: Create Printer Agent 4. Enter the desired name for the Printer Agent (PA) Name. 5. Normally, the NDPS Manager will be the NDPS Manger object you are using. 6. Select Novell Printer Gateway in the Gateway Type. (see figure2 above) 7. Click OK and then select the available printer. 8. Select Remote (LPR on IP) in the Connection Type. 9. Click Next to see the following Configure Port Handler screen. Page 78 Figure 45 Configure Port Handler 10. In the Host address IP field, enter the IP Address previously assigned to the Print Server device. 11. In the Printer Name field, enter the Logical Port name on the Print Server. (L1 for Port 1, L2 for port 2). 12. Click Finish, then select appropriate drivers for Windows 98 etc as required. 13. The new Printer Agent will now appear in the Printer Agent List window. Repeat this procedure for any other ports on the Print Server, or for any other logical printers you wish to use. Client PCs can now be configured as described in Chapter 4 - Client Configuration. Page 79 Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. CE Approval CE Standards This product complies with the 99/5/EEC directives, including the following safety and EMC standards:
EN300328-2 EN301489-1/-17 EN60950 We Hereby, Motorola Inc., declares that this Wireless Print Server Model Name :WPS870G is in compliance with the essential requirements and other relevant provisions of R&TTE Directive 99/5/EC. CE Marking Warning This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Page 80
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2004-05-04 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2004-05-04
|
||||
| 1 | Applicant's complete, legal business name |
ARRIS
|
||||
| 1 | FCC Registration Number (FRN) |
0007379399
|
||||
| 1 | Physical Address |
101 Tournament Drive
|
||||
| 1 |
Horsham, Pennsylvania 19044
|
|||||
| 1 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
ACQ
|
||||
| 1 | Equipment Product Code |
WPS870G
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
J******** V********
|
||||
| 1 | Telephone Number |
215-3********
|
||||
| 1 | Fax Number |
215-3********
|
||||
| 1 |
J******@arris.com
|
|||||
| app s | Technical Contact | |||||
| 1 | Firm Name |
Exclusive Certification Corp.
|
||||
| 1 | Name |
C**** W********
|
||||
| 1 | Physical Address |
4F-2, No.28, Lane 78, Xing-Ai Road
|
||||
| 1 |
Taipei City, 114
|
|||||
| 1 |
Taiwan
|
|||||
| 1 | Telephone Number |
+886-******** Extension:
|
||||
| 1 | Fax Number |
+886-********
|
||||
| 1 |
c******@ecc.com.tw
|
|||||
| app s | Non Technical Contact | |||||
| 1 | Firm Name |
Exclusive Certification Corp.
|
||||
| 1 | Name |
C****** W******
|
||||
| 1 | Physical Address |
4F-2, No.28, Lane 78, Xing-Ai Road
|
||||
| 1 |
Taipei City, 114
|
|||||
| 1 |
Taiwan
|
|||||
| 1 | Telephone Number |
+886-******** Extension:
|
||||
| 1 | Fax Number |
+886-********
|
||||
| 1 |
c******@ecc.com.tw
|
|||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless 802.11g High Speed AP Router | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power output listed is conducted. This Access Point is authorized for use only with the integrated mini-PCI card specified in the filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
Cerpass Technology Corporation
|
||||
| 1 | Name |
A****** C******
|
||||
| 1 | Telephone Number |
886-2******** Extension:
|
||||
| 1 | Fax Number |
886-2********
|
||||
| 1 |
a******@ecc.com.tw
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 20 CE | 2412.00000000 | 2462.00000000 | 0.0420000 | |||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC