This device complies with Part 15 of FCC rules and does not cause harmful interference. This product may cause Interference to radio equipment and should not installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. Variations of this language are permitted provide all the points of the statement are addressed and may be presented in any legible font or et. Style. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of he following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Modifications not authorized by the manufacturer may void users authority to operate the device. Jeep, is a registered trademark of DaimlerChrysler Corporation and is used under license.oDaimlerChrysler Corporation 2005. ANY QUESTIONS ON THIS PRODUCT, PLEASE CONTACT Jeep, LICENSEE:
Power Brands 80-A EAST JEFRYN BLVD DEER PARK, NY 11729 USA Phone: 800-354-8785 Model: JJCL Jeep. JEEP AM/FM/WB, Flashlight Fluorescent Lantern Radio Customer Assistance Phone Number: 1-800-354-8785 Power Brands LLC 80A East Jefryn Blvd Deer Park, NY 11729 Product Made in China REMARK:
Replace the R listening to Special note:
Power Switch You will need Emergency Swi Flashlight Then matc Lantern Turn the Lant
* Compartmen
* To replace
- Turn the vo the unit has
- Adjust the T Using earph Using micro come through Installing or Replace Dry Cell Battery for Pull out the battery door for LCD clock (22 in the battery compartment. LCD Clock
) and install dry cell battery 1 x AAA following the polarity diagram echargeable batteries when the sound becomes weak or distorted at ordinary volume level when the radio or dim light. Battery door for LCD Clock is located inside large D Cell battery compartment. Door for clock pat tery iss is joes ted inside main battery compartment. Remove main compart door(21) to access and remove clock battery door (2 lace AAA battery using correct polarity (+ -) and replace door (22) to first press the Power Switch (4) once to turn on the power for Lantern radio operation. tch When in emergency, turn Emergency Switch (1) to FLASH for flashing red light, SIREN for warning sound and S/F for both flashing red light and warning sound. Turn the Flashlight On/Off Switch (2) to ON to turn on the Flashlight. You may pull out and adjust the best angle of the Flashlight (8). To replace flashlight bulb: /
1. Grasp rubber flas a ght head and silver housing simultaneously. Twist head to left approx. 1/4 turn, extrusion on head
(male) should match(female) slot on silver housing. Pull rubber head off silver housing. Unscrew flashlig At bulb and replace with similar buib. 3. To replace ee flashlight, make sure clear plastic lens is in slotted position on head. head extrusion (male) to (female) slot on silver housing. Push rubber head onto housing. Twist head to right 1/4 turn to lock into place. ern On/Off Switch (3) to ON to turn on the Lantern. You may pull our and adust the best angel of the lantern(16). under lantern is simply for storage of small things. /
antern tube remove 3 screws holding plastic lantern cover. Twist and pul out old tube and replace with similar tube. Radio/Siren Operation ume control(14) counter-clockwise until sound comes out from speaker. A click sound indicated een turned dei
- Set the Band switch(13) to either AM or FM or WB(weather band) as desired. uning knob(12) to select station.
- Insert the earphone (not oneluded) plug into the Earphone Jack(5) when Listening. radio privately. i one jack: Plug earphone or headphone into eeppome jack for private listening of radio.
- Insert the microphone (not included) into the MIC jack hone jack: Unit may be used as a loudsdeakes Ny simply plugging microphone into proper jack. Voice will speaker. Note other audio functions do not operate while mic jack is being used. Also, microphone will not function If Turn the Mosq Correct the Ti antern is siren/flasher mode.Note: it is normal that properly with lantern. Mosquito Repeller uito Repeller Switch counter-clockwise to it on. The effectiveness of this feature is not measurable and should not be considered a viable method to repel mosquitoes. ime and Date
* Press the Mode button ocne to show time and day.
* Press the Mode button again for month setting, then press Set button for each advancing.
* Press the Mode button again for day setting, then press Set button for each advancing.
* Press the Mode button again for hour setting, then press Set button for each advancing.
* Press the Mode button again for minute setting . then press Set button for each advancing.
* Press the Mode button again once more to complete the Date and Time setting. Note: Clock f Frequency:
Antenna FM:
1. EMERGENCY SWITCH 13. BAND SWITCH ae ee eae 2. FLASHLIGHT ON/OFF SWITCH 14. VOLUME ON/OFF CONTROL AC Charger: 6 3. LANTERN ON/OFF SWITCH 15. LOUDSPEAKER 4. POWER SWITCH 16. LANTERN NS 5. EARPHONE JACK 17. THERMOMETER Bo not aeae 6. MICROPHONE JACK 18. LCD CLOCK 7. COMPASS 19. MOSQUITO REPELLER SWITCH Do not disass 8. FLASHLIGHT 20. FM TELESCOPIC ANTENNA 9. BLINKER LIGHT 21. BATTERY DOOR 10. STORAGE BOX 22. BATTERY DOOR FORLCD CLOCK 11. HANDLE 23. DC JACK 12. TUNING KNOB poeta Lt ine 2 Replace Batteries for Lantern Radio Pull out t battery compartment.To use recharge feature, you must purchase accessories.
- 6V AC adapter or DC car cord.
- 4 rechargeable batteries into unit and plug Use recharge battery manufacturers recommendations for charge time. ace(18) has protective film, you may remove this by simply peeling off. FM: 88-108 MHz AM: 530-1700 KHz WB: 162-163 MHz built-in coil antenna ferrite bar 3 Loudspeaker V, 300mA th a soft, damp cloth. Avoid abrasives or harsh chemical cleaners. circuit supply terminals. Do not mix old/new batteries, different brands or type. emble battery or dispose of in fire e battery door (21) and install or replace the battery 4 x D cell following the polarity diagram in the into wall or car power port. Unit will automatically recharge batteries. Note unit will not recharge regular Alkaline batteries. These must be replaced when low for unit to function properly.