User Manual Handsfree-System User Manual Handsfree-System Models : ZKM013 ZKM013A ZKM013-903 ZKM013A-903 The document hereon is the property of Asahi Denso Co., Ltd. Page 1 of 17 ZKM013-820_0 User Manual Handsfree-System Revision history Rev. Date 00 01 20.Oct.2020 9.Nov.2020 02 17.Dec.2020 Points modified Changes description First Release Modify FCC ID (3.2.4) Replace NCC disclaimer (3.2.8) 3.2.4 Change product name Steering lock Ignition SW 3.2.5 Change product name Steering lock Ignition SW Add Vietnam certification 1.Add and change sentence The document hereon is the property of Asahi Denso Co., Ltd. Page 2 of 17 ZKM013-820_0 User Manual Handsfree-System Index 1. Overview .......................................................................................................................................... 4 Motorcycle start (Turn on the ignition and start the engine) ................................................... 5 Smart key ............................................................................................................................ 5 Immobilizer key .................................................................................................................. 5 Turn off the ignition and stop the engine ................................................................................. 6 Parking (Lock of the steering) .................................................................................................. 6 Smart key ............................................................................................................................ 6 Immobilizer key .................................................................................................................. 6 Replacing the battery in the Smart Key .................................................................................... 7 2. Installation notes ............................................................................................................................ 11 Handsfree-System attachment................................................................................................ 11 Access to Smart key internal parts .......................................................................................... 11 Product modifications ............................................................................................................. 11 If the product fails ................................................................................................................... 11 3. Certification .................................................................................................................................... 12 Manufacturer .......................................................................................................................... 12 Approval of each country ........................................................................................................ 12 Australia certification ....................................................................................................... 12 China precautions for use ................................................................................................ 12 EU DoC ............................................................................................................................. 13 FCC(USA) certification ...................................................................................................... 15 ISED(Canada) certification ............................................................................................... 15 Korea certification ............................................................................................................ 16 Malaysia certification ....................................................................................................... 16 Taiwan certification .......................................................................................................... 16 Thailand certification ....................................................................................................... 16 Vietnam certification ..................................................................................................... 17 The document hereon is the property of Asahi Denso Co., Ltd. Page 3 of 17 ZKM013-820_0 User Manual Handsfree-System 1. Overview This product is an steering lock with Handsfree-System designed to prevent theft. This product can be attached to the motorcycle. Lock and Unlock of the steering, by moving the Lock bar (5). The system is composed of:
- The Ignition SW (1) with its integral steering lock equipped control unit (4), which provides the following functions:
User recognizer, by means of a Smart key (2) or an Immobilizer Key (3). Enable and disable of the ignition of the bike .
- The Smart key (2) referred to as Active Transponder. It can also be used as an Immobilizer key.
- The Immobilizer key (3) referred to as Passive Transponder. The Handsfree-System combines the LF: Low Frequency and the RF: Radio Frequency to recognize the right user of the motorcycle. The system is integrated in CAN bus for all data transfer with the other electronic units on the motorcycle.
(2)
(3)
(5)
(1)
(6)
(4) The document hereon is the property of Asahi Denso Co., Ltd. Page 4 of 17 ZKM013-820_0 User Manual Handsfree-System Motorcycle start (Turn on the ignition and start the engine) Smart key User recognition with the Smart key (2) is performed as described below:
A. Press the knob on the Ignition SW (1). B. The Control unit (4) installed on the Ignition SW (1) requires the Smart key (2) for a radio frequency C. identification with an LF signal transmitted by the LF antenna incorporated in the Control unit (4). If the Smart key (2) is within a range of 1.0 m from the vehicle and the battery is adequately charged, replies to the Control unit (4) and starts authentication. D. After successful authentication, Ignition switch knob becomes rotatable for 5 seconds. While the knob is rotatable, LED (6) is lit. When the knob is rotated to the ON position, the main power of the vehicle turns ON and engine can be started. If authentication failed, engine cant be started. E. Press the starter switch on the handle switch to start the engine. Immobilizer key User recognition with the Immobilizer key (3) is performed as described below:
A. Press the knob on the Ignition SW (1). B. After about 3 seconds, the Control unit (4) installed on the Ignition SW (1) requires the Immobilizer key (3) for a low frequency identification with an LF signal transmitted by the LF antenna incorporated in the Control unit (4). If the Immobilizer key (3) is near the LF Antenna in the Control unit (4), replies to the Control unit (4) and starts authentication. C. D. After successful authentication, Ignition switch knob becomes rotatable for 5 seconds. While the knob is rotatable, LED (6) is lit. When the knob is rotated to the ON position, the main power of the vehicle turns ON and engine can be started. If authentication failed, engine cant be started. E. Press the starter switch on the handle switch to start the engine. Immobilizer set position The document hereon is the property of Asahi Denso Co., Ltd. Page 5 of 17 ZKM013-820_0 User Manual Handsfree-System Turn off the ignition and stop the engine When the ignition switch knob is rotated to the OFF position, the main power of the vehicle turns OFF. Neither Smart key (2) nor Immobilizer key (3) are required for Key OFF Parking (Lock of the steering) To lock the steering lock:
Stop the motorcycle, then put it on the side stand and steer the handlebar rightward or leftward to the lockable position. Smart key User recognition with the Smart key (2) is performed as described below:
A. A. Press the knob on the Ignition SW (1). B. The Control unit (4) installed on the Ignition SW (1) requires the Smart key (2) for a radio frequency C. identification with an LF signal transmitted by the LF antenna incorporated in the Control unit (4). If the Smart key (2) is within a range of 1.0 m from the vehicle and the battery is adequately charged, replies to the Control unit (4) and starts authentication. D. After successful authentication, Ignition switch knob becomes rotatable for 5 seconds. While the knob is rotatable, LED (6) is lit. When the knob is kept pressed and rotated to the LOCK position, the steering becomes locked. Immobilizer key User recognition with the Immobilizer key (3) is performed as described below:
A. Press the knob on the Ignition SW (1). B. After about 3 seconds, the Control unit (4) installed on the Ignition SW (1) requires the Immobilizer key (3) for a low frequency identification with an LF signal transmitted by the LF antenna incorporated in the Control unit (4). If the Immobilizer key (3) is near the LF Antenna in the Control unit (4), replies to the Control unit (4) and starts authentication. C. D. After successful authentication, Ignition switch knob becomes rotatable for 5 seconds. While the knob is rotatable, LED (6) is lit. When the knob is kept pressed and rotated to the LOCK position, the steering becomes locked. The document hereon is the property of Asahi Denso Co., Ltd. Page 6 of 17 ZKM013-820_0 User Manual Handsfree-System Replacing the battery in the Smart Key
(A)
(B)
[Important]
Take special care (A) when removing the key battery. This symbol (B) warns the user about important use and maintenance instructions contained inside the documents provided with the equipment.
[Warnings / Caution]
Risk of battery leakage, heat generation, and explosion Do not expose the key to high temperatures, such as on the dashboard, and under direct sunlight. Do not mechanically crush or cut the key. Risk of explosion if the battery is replaced by an incorrect type Always use only the same or an equivalent type of CR2032 3.0 [V] coin batteries. Do not include a coin battery in your mouth. There is a risk of burns from chemical substances. This product contains a coin battery. If coin batteries are accidentally ingested, chemical burns, penetration of mucosal tissue, etc. or in the worst case, death may result in just 2 hours. Keep new and used batteries away from children. If the battery cover does not close securely, stop using the product and keep it away from children. If you suspect that a battery is might have been swallowed or placed inside any part of the body, seek immediate medical attention. The document hereon is the property of Asahi Denso Co., Ltd. Page 7 of 17 ZKM013-820_0 User Manual Handsfree-System Insert "screwdriver" into the dent of "Rear plastic cover". Raise the inserted "screwdriver" in the direction of the arrow and remove "Rear plastic cover". Insert "screwdriver" into the dent in "Coin battery cover". Raise the inserted "screwdriver" in the direction of the arrow and remove "Coin battery cover". 1. 2. The document hereon is the property of Asahi Denso Co., Ltd. Page 8 of 17 ZKM013-820_0 User Manual Handsfree-System 3. Remove "Used coin battery" and replace it with "New coin battery" .
4. Attach "Coin battery cover" . The document hereon is the property of Asahi Denso Co., Ltd. Page 9 of 17 ZKM013-820_0 User Manual Handsfree-System 5. Attach "Rear plastic cover" with hooks in the order of (A) (B).
(A)
(B) The document hereon is the property of Asahi Denso Co., Ltd. Page 10 of 17 ZKM013-820_0 User Manual Handsfree-System 2. Installation notes Handsfree-System attachment Handsfree-System consists of Ignition SW, Smart key, Immobilizer key. These are attached to a vehicle by factory/field personnel. Access to Smart key internal parts It is strictly forbidden to have access to the inner electrical components, except used battery to be It is strictly forbidden to modify or tamper products included in the Handsfree-System including replaced. the Antenna Unit. Product modifications If the product fails All damaged components, must be replaced. The document hereon is the property of Asahi Denso Co., Ltd. Page 11 of 17 ZKM013-820_0 User Manual Handsfree-System 3. Certification Manufacturer Company Name ASAHI DENSO CO., LTD. Address Website 6-2-1 Somejidai, Hamakita-ku, Hamamatsu, Shizuoka 434-0046, Japan http://www.ad-asahidenso.co.jp Approval of each country Australia certification China precautions for use ISM 5000 The document hereon is the property of Asahi Denso Co., Ltd. Page 12 of 17 ZKM013-820_0 User Manual Handsfree-System EU DoC 3.2.3.1. Ignitin SW The document hereon is the property of Asahi Denso Co., Ltd. Page 13 of 17 ZKM013-820_0 User Manual Handsfree-System 3.2.3.2. Smart key The document hereon is the property of Asahi Denso Co., Ltd. Page 14 of 17 ZKM013-820_0 User Manual Handsfree-System FCC(USA) certification Product name Ignition SW Smart key FCC ID T8VZKM013A T8VZKM013A903 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. ISED(Canada) certification Product name Ignition SW Smart key IC 6505A-ZKM013A 6505A-ZKM013A903 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. operation of the device. 2. This device must accept any interference, including interference that may cause undesired Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1. Lappareil ne doit pas produire de brouillage;
2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The document hereon is the property of Asahi Denso Co., Ltd. Page 15 of 17 ZKM013-820_0 User Manual Handsfree-System Korea certification 3.2.6.1. IGNITION SW Equipment Name Registration No. R-R-AD1-ZKM013 3.2.6.2. SMART KEY Equipment Name Registration No.
( ) R-C-AD1-ZKM013-903 The certification mark is shown here because there is not enough space on the product to display Malaysia certification the certification mark. HIDF20000000 Taiwan certification Thailand certification
. The document hereon is the property of Asahi Denso Co., Ltd. Page 16 of 17 ZKM013-820_0 User Manual Handsfree-System Vietnam certification the certification mark. The certification mark is shown here because there is not enough space on the product to display s r o t o M i k a s a w a K m a N t V i 0 2 0 2 6 1 0 0 B The document hereon is the property of Asahi Denso Co., Ltd. Page 17 of 17 ZKM013-820_0