User Guide E14032 15060-0HF20100 Revised Edition / March 2018 Model: ASUS_X017DA / ASUS_X017D(ZC600KL) Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device. NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus. com/support/. Front features Front camera Receiver Front camera LED indicator Flash Proximity sensor and light sensor Touch screen display Side features Microphone Audio jack Eject hole Nano SIM1, Nano SIM2, Micro SD card slot Volume key Power key Microphone Speaker Micro USB port Rear features Flash Rear camera Fingerprint sensor NFC detection area Charging your ASUS Phone To charge your ASUS Phone:
1. Connect the USB connector into the power adapters USB port. 2. Connect the other end of the USB cable to your ASUS Phone. 3. Plug the power adapter into a wall socket. 3 2 1 IMPORTANT!
When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible. When charging your ASUS Phone through your computer, ensure that you plug the USB cable to your computers USB port. Avoid charging your ASUS Phone in an environment with ambient temperature of above 35oC (95oF). NOTES:
For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury. For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone. The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the USB cable is +5.2V/5V 1A, 5W
+5V 2A, 10W. Installing a Nano SIM/ microSD card To install a Nano SIM/ microSD card:
1. Push the bundled eject pin into the hole on the 2. card slot to eject the tray out. Insert the Nano SIM or microSD card into the appropriate slot. 3. Push the tray to close it. NOTES:
The Nano SIM card slots support GSM, WCDMA, FDD-LTE, and TDD-LTE network bands. The microSD card slot supports microSD and microSDXC card formats. IMPORTANT! When two SIM cards are inserted, only one SIM card slot supports 4G/3G/2G service. The other SIM card slot only supports 2G/3G service. CAUTION!
Do not use sharp tools or solvent on your device to avoid scratches on it. Use only a standard Nano SIM card on your ASUS Phone. Using NFC You can use NFC in the following two scenarios:
Reader mode: Your phone reads information from a contactless card, NFC tag, or other NFC devices. Place the NFC area of your phone on the contactless card, NFC tag, or NFC device. Peer-to-Peer mode: Transfers photos, contacts, or other data between your phone and an NFC-
enabled smartphone. Bring the NFC areas of both smartphones together, without any space between them. Federal Communications Commission Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
-
-
The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US must be fixed to US-operated channels only. The responsible party within the USA per 47 CFR Part 2.1077(a)(3):
ASUS COMPUTER INTERNATIONAL (America) Address: Corporate Way, Fremont, CA 94539, USA Telephone: +1-510-739-3777 RF Exposure Information (SAR) This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device away from your head and body. Carry this device at least 10 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified, and use such accessories should be avoided. 0.74 W/Kg @1g(Head) 1.06 W/Kg @1g(Body) The highest FCC SAR values for the device (ASUS_ X017DA) are as follows:
The FCC has granted an Equipment Authorization for this device (ASUS_X017DA) with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/
ea/fccid after searching on FCC ID: MSQX017DA. FCC Statement (HAC) This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19-2011. There are two sets of ANSI standards with ratings from one to four (four being the best rating): an M rating for reduced interference making it easier to hear conversations on the phone when using the hearing aid microphone, and a T rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise. The Hearing Aid Compatibility rating is displayed on the wireless phone box. A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an M3 or M4 rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a T3 or T4 rating. The tested M-Rating and T-Rating for this device
(ASUS_X017DA) are M4 and T3. Youll want to try a number of wireless phones so that you can decide which works the best with your hearing aids. You may also want to talk with your hearing aid professional about the extent to which your hearing aids are immune to interference, if they have wireless phone shielding, and whether your hearing aid has a HAC rating. Canada, Industry Canada (IC) Notices This device complies with Industry Canadas licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux normes CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Son utilisation est sujette aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer dinterfrences nuisibles, et
(2) Cet appareil doit tolrer tout type dinterfrences, y compris celles susceptibles de provoquer un fonctionnement non souhait de lappareil. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device (ASUS_X017DA) has been evaluated for and shown compliant with the IC Specific Absorption Rate (SAR) limits when installed in specific host products operated in portable exposure conditions. Canadas REL (Radio Equipment List) can be found at the following web address: http://www.ic.gc.ca/
app/sitt/reltel/srch/nwRdSrch.do?lang=eng. Additional Canadian information on RF exposure also can be found at the following web address:
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792. html. This equipment should be installed and operated with minimum distance 10 mm between the radiator and your body. Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par cet appareil sans fil est infrieure la limite dexposition aux frquences radio dIndustrie Canada (IC). Utilisez lappareil sans fil de faon minimiser les contacts humains lors dun fonctionnement normal. Cet appareil t valu et dmontr conforme aux limites de DAS (Dbit dabsorption spcifique) dIC lorsquil est install dans des produits htes particuliers qui fonctionnent dans des conditions dexposition des appareils portables. Ce priphrique est homologu pour lutilisation au Canada. Pour consulter lentre correspondant lappareil dans la liste dquipement radio (REL
- Radio Equipment List) dIndustrie Canada rendez-
vous sur :
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch. do?lang=eng. Pour des informations supplmentaires concernant lexposition aux ondes radio au Canada, rendez-
vous sur :
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792. html. Cet appareil doit tre install et utilis avec un minimum de 10 mm de distance entre la source de rayonnement et votre corps. CAN ICES-3(B)/NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device and its antenna(s) must not be co-
located or operated in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products that are marketed in the US/ Canada. Cet appareil et son ou ses antenne(s) ne doivent pas tre situs prs de ou utiliss conjointement avec une autre antenne ou un autre metteur, exception faite des radios intgres qui ont t testes. La fonction de slection de lindicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. The IC ID for this device (ASUS_X017DA) is 3568A-X017DA. Lidentifiant Industrie Canada de cet appareil
(ASUS_X017DA) est: 3568A-X017DA. Caution This device(ASUS_X017DA) for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems. Avertissement les dispositifs (ASUS_X017DA) fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduireles risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. EU Radio Equipment Directive Compliance Simplified EU Declaration of Conformity Hereby, ASUSTek Computer Inc. declares that the radio equipment ASUS_X017DA / ASUS_X017D is in compliance with Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://
www.asus.com/support/. (Search for ZC600KL) RF Output Table (ASUS_X017DA) Items Bluetooth WLAN NFC GSM 12(dBm) 9.8(dBm)
-0.04(dBm) 16.4(dBm) 14.8(dBm) 12.4(dBm) Maximum Radio-Frequency Output Power Table Bluetooth BR/EDR (2402~2480 MHz) Bluetooth -LE (2402~2480 MHz) 2.4GHz 802.11b (2412~2472 MHz) 2.4GHz 802.11g (2412~2472 MHz) 2.4GHz 802.11n HT20
(2412~2472MHz) 2.4GHz 802.11n HT40
(2422~2462MHz) 5GHz 802.11a (5180~5320, 5500~5825 MHz) 5GHz 802.11n HT20 (5180~5320, 5500~5825 MHz) 5GHz 802.11 n HT40 (5190~5310, 5510~5795 MHz) 5GHz 802.11ac-VHT20
(5180~5320, 5500~5825 MHz) 5GHz 802.11ac-VHT40
(5190~5310, 5510~5795 MHz) 5GHz 802.11ac VHT80
(5210~5290, 5530~5775MHz) 13.553-13.567MHz 15.07(dBm) 10.74(dBm) 10.63(dBm) 9.96(dBm) 7.22(dBm) 7.15(dBm) GSM 900 Burst (880~915 ;
925~960 MHz) GSM 1800 Burst (1710~1785;
1805~1880 MHz)
-12.62
(dBuA/M) 32.79(dBm) 29.80(dBm) Items WCDMA LTE 22.64(dBm) 23.32(dBm) Maximum Radio-Frequency Output Power Table 22.69(dBm) WCDMA Band I (1920~1980 ;
2110~2170 MHz) WCDMA Band VIII (880~915 ;
925~960 MHz) LTE Band I (1920~1980 ;
2110~2170 MHz) LTE Band III (1710~1785 ;
1805~1880 MHz) LTE Band VII (2500~2570 ;
2620~2690 MHz) LTE Band VIII (880~915 ; 925~960 MHz) LTE Band XX (832~862 ; 791~821 MHz) LTE Band XL (2300~2400 MHz) 22.71(dBm) 23.01(dBm) 23.01(dBm) 22.74(dBm) 23.1(dBm) RF Output Table (ASUS_X017D) Items Bluetooth WLAN 5.40(dBm) Maximum Radio-Frequency Output Power Table Bluetooth BR/EDR (2402~2480 MHz) Bluetooth -LE (2402~2480 MHz) 2.4GHz 802.11b (2412~2472 MHz) 2.4GHz 802.11g (2412~2472 MHz) 2.4GHz 802.11n HT20
(2412~2472MHz) 2.4GHz 802.11n HT40
(2422~2462MHz) 0.70(dBm) 16.40(dBm) 14.80(dBm) 13.00(dBm) 13.00(dBm) NFC 13.553-13.567MHz GSM WCDMA GSM 900 Burst (880~915 ;
925~960 MHz) GSM 1800 Burst (1710~1785 ;
1805~1880 MHz) WCDMA Band I (1920~1980 ;
2110~2170 MHz) WCDMA Band VIII (880~915 ;
925~960 MHz)
-15.25
(dBuA/M) 32.80(dBm) 29.30(dBm) 23.42(dBm) 23.75(dBm) Items LTE 23.18(dBm) Maximum Radio-Frequency Output Power Table 23.31(dBm) LTE Band I (1920~1980 ;
2110~2170 MHz) LTE Band III (1710~1785 ;
1805~1880 MHz) LTE Band VII (2500~2570 ;
2620~2690 MHz) LTE Band VIII (880~915 ; 925~960 MHz) LTE Band XX (832~862 ; 791~821 MHz) LTE Band XL (2300~2400 MHz) 23.26(dBm) 23.10(dBm) 23.29(dBm) 23.26(dBm) NOTE: These RF output power tables are for EU member states, the EEA States, the EFTA States and Turkey only. The frequency range and the RF output power may differ from other non-EU countries. The Wi-Fi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the table below:
AT DE LV NO FI BE IS LI PL SE BG IE LT PT CH CZ IT LU RO UK DK EL HU SI HR EE ES MT SK FR CY NL TR NOTE: Only ZC600KL(ASUS_X017DA) with Snapdragon 630 processor supports 5GHz band. RF Exposure Information This ASUS product has been tested and meets applicable European SAR limits. The SAR limit is 2.0 W/kg in countries that set the limit averaged over 10 grams of tissue. The specific maximum SAR values for this device are as follows:
ASUS_X017DA(ZC600KL) Head: 0.442 W/Kg Body: 1.481 W/Kg Head: 0.414 W/Kg Body: 1.444 W/Kg ASUS_X017D(ZC600KL) When carrying this device or using it while worn on the body, either use an approved accessory such as a holster or otherwise maintain a distance of 0.5 cm from the body to ensure compliance with RF exposure requirements. CE Marking Using GPS (Global Positioning System) on your ASUS Phone To use the GPS positioning feature on your ASUS Phone:
Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps. For first-time use of a GPS-enabled app on your device, ensure that you are outdoors to get the best positioning data. When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance. Safety information CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ASUS Phone care Use your ASUS Phone in an environment with ambient temperatures between 0 C (32 F) and 35 C (95 F). The battery WARNING: Disassembling the battery by yourself will void its warranty and may cause serious harm. Your ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life. Do not remove the non-detachable li-polymer battery as this will void the warranty. Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 C to +35 C. Do not remove and replace the battery with a non-approved battery. Use only ASUS battery. Using a different battery may cause physical harm/injury and may damage your device. Do not remove and soak the battery in water or any other liquid. Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin. Do not remove and short-circuit the battery, as it may overheat and cause a fire. Keep it away from jewelry or metal objects. Do not remove and dispose of the battery in fire. It could explode and release harmful substances into the environment. Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point. Do not touch the battery terminals. To avoid fire or burns, do not disassemble, bend, crush, or puncture the battery. NOTES:
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. The charger Use only the charger supplied with your ASUS Phone. Never pull the charger cord to disconnect it from the power socket. Pull the charger itself. Caution Your ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 C (32F) and 35 C (95 F). Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result. Do not short-circuit the battery terminals with metal items. Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. General Usage (typical body-worn) (for Japan) This device(ASUS_X017DA) (front & rear side) should be operated under a seperation distance of 15 mm from the human body.
* The other four sides are not in close proximity to the human body at the general use as described above. India E-waste (Management and handling) Rules 2016 This product complies with the India E-Waste
(Management) Rules, 2016 and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule. Regional notice for Singapore This ASUS Phone(ASUS_ X017DA) complies with IMDA Standards. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://
csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. Proper disposal Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product
(electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products. DO NOT throw this product in fire. DO NOT short circuit the contacts. DO NOT disassemble this product. WARNING Cancer and Reproductive Harm-
www.P65Warnings.ca.gov NOTE: For more legal and e-labelling information, check on your device from Settings > About >
Legal information. FCC COMPLIANCE INFROMATION Per FCC Part 2 Section 2.1077 Responsible Party: Asus Computer International Address:
Phone/Fax No:
800 Corporate Way, Fremont, CA 94539.
(510)739-3777/(510)608-4555 hereby declares that the product Product Name : ASUS Phone(Mobile Phone) Model Number : ASUS_X017DA compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ver. 180125 ASUS Address: 4F, No.150 Li-Te Rd., Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us. Sincerely yours, ASUSTeK COMPUTER INC. Tel: 886228943447 Fax: 886228907698 Support: https://www.asus.com/support/
Copyright 2018 ASUSTeK COMPUTER INC. All Rights Reserved. You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you. ASUS PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)