WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6240040.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Hardware Explanations I/O Ports Overview LED Lights Overview Power button 2.5G/1G WAN port LAN 1-4 ports USB 3.2 Gen 1 port 5GHz LAN Quick Start Guide RT-AX88U Pro AX6000 Dual Band Wi-Fi Router One Router Setup Steps WE SUGGEST... Reset button DCIN port 2.5G/1G LAN port WPS button Power LED 2.4GHz LAN Specifications:
DC Power adapter DC Output: +19.5V with 2.31A current DC Output: +19V with 2.37A current Operating Temperature Operating Humidity 0~40oC 50~90%
Storage Storage 0~70oC 20~90%
2.5G/1G WAN LED LAN LED 2.5G/1G LAN LED USB 3.2 Gen 1 LED WPS LED 01 Prepare your Modem 1 Unplug the power of cable / DSL modem. If it has a battery backup, remove the battery. Unplug 2 Connect your modem to WAN port at the back side of the router with the 4 Check the modem LED lights to ensure the connection is active. network cable provided. 3 Power on the modem. Plug modem to the power outlet and power on. Modem back Modem front Modem back If you are using DSL for internet, you will need your username
/ password from your Internet service provider (ISP) to properly configure your router. 02 Install your Router 1 Plug the adapter into the DCIN port, and press the Power switch. 2 The power LED will light up when the hardware is ready. Via app 3 [App] On your iOS or Android mobile device, go to the app store, search forASUS Router, and download the app. 4 [App] On your iOS or Android mobile device, tapSettings > Wi-Fi, connect to the default network SSID shown on the product label on the back side of the router. Or scan the QR code on the product label to connect the default network SSID. 5 [App] Launch ASUS Router App and follow the instructions to complete the setup.
* XX refers to the last two digits of MAC address. You can find it on the label on the back of your router.
Or via web browser 3 [Wired] Connect your PC to LAN port at the back side of the router using an additional network cable.
[Wireless] Connect to the network with default SSID shown on the product label on the back side of your router ASUS_XX. 4 [Wired / Wireless] Open a web browser. You will be redirected to the ASUS Setup Wizard. If not, navigate to http://www.asusrouter.com.
Follow the instructions to complete the setup. http://www.asusrouter.com/
2.5G Port WAN Type Setup Steps 01 Prepare your Router Connect the modem to the 2.5G/1G WAN port with a network cable. 02 Login and Connect Setting to 2.5G WAN under factory default settings 1 [ASUS Setup Wizard] Select Manual Setting. 2 [ASUS Setup Wizard] Select 2.5G Ethernet, then follow the instructions to complete the setup of SSID and login information.
Switching from 1G WAN to 2.5G WAN 1 [Dashboard] Go to Dashboard, open WAN setting.
2 [Dashboard] Choose 2.5G WAN as primary
WAN, then apply the setting.
FAQ FREQUENTLY ASKED QUESTIONS Q1: Where can I find more information about the wireless router?
Technical support site: https://www.asus.com/support 03 Start to Use 1 After following the setup steps, the router will reboot for a second and start to connect the Internet with 2.5G port. The 2.5G LED will indicate white light. Service and Support Video Tutorials ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions. REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Prohibition of Co-location This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. This device is restricted for indoor use. WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 51cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is restricted for indoor use. Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. CAN ICES-003(B)/NMB-003(B) Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This equipment should be installed and operated with a minimum distance of 31cm between the radiator any part of your body. This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canadas REL (Radio Equipment List) can be found at the following web address:
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Additional Canadian information on RF exposure also can be found at the following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html This radio transmitter [3568A-RTAX6800] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio (3568A-RTAX6800) a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal d'antenne. Les types d'antennes non inclus dans cette liste qui ont un gain suprieur au gain maximal indiqu pour tout type list sont strictement interdits pour une utilisation avec cet appareil. https://www.asus.com/support https://qr.asus.com/wl_videotutorials Dclaration de conformit de Innovation, Sciences et Dveloppement conomique Canada (ISED) Le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. La bande 5150 5250 MHz est rserve uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. CAN ICES-003(B)/NMB-003(B) Informations concernant lexposition aux frquences radio (RF) La puissance de sortie mise par cet appareil sans fil est infrieure la limite dexposition aux frquences radio dInnovation, Sciences et Dveloppement conomique du Canada (ISED). Utilisez lappareil sans fil de faon minimiser les contacts humains lors dun fonctionnement normal. Cet quipement doit tre install et utilis avec un minimum de 31cm de distance entre la source de rayonnement et votre corps. Lutilisation de cet appareil est autorise au Canada. Pour consulter lentre correspondant lappareil dans la liste dquipement radio (REL - Radio Equipment List) dInnovation, Sciences et Dveloppement conomique du Canada, rendez-vous sur : http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html Pour des informations supplmentaires concernant lexposition aux frquences radio au Canada, rendez-vous sur :
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html For indoor use only. Pour une utilisation en intrieur uniquement. Safety Notices Use this product in environments with ambient temperatures between 0C(32F) and 40C(104F). Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating. DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged. DO NOT place or drop objects on top and do not shove any foreign objects into the product. DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms. DO NOT cover the vents on the product to prevent the system from getting overheated. DO NOT use damaged power cords, accessories, or other peripherals. If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. DO NOT mount this equipment higher than 2 meters. Avertissements de scurit Utilisez ce produit dans un environnement dont la temprature ambiante est comprise entre 0C (32F) et 40C (104F). Rfrez-vous l'tiquette situe au dessous du produit pour vrifier que l'adaptateur secteur rpond aux exigences de tension. NE PAS placer sur une surface irrgulire ou instable. Contactez le service aprs-vente si le chssis a t endommag. NE PAS placer, faire tomber ou insrer d'objets sur/dans le produit. NE PAS exposer l'appareil la pluie ou l'humidit, tenez-le distance des liquides. NE PAS utiliser le modem lors d'un orage. NE PAS bloquer les ouvertures destines la ventilation du systme pour viter que celui-ci ne surchauffe. NE PAS utiliser de cordons d'alimentation, d'accessoires ou autres priphriques endommags. Si l'adaptateur est endommag, n'essayez pas de le rparer vous-mme. Contactez un technicien lectrique qualifi ou votre revendeur. Pour viter tout risque de choc lectrique, dbranchez le cble d'alimentation de la prise lectrique avant de toucher au systme. Ne placez pas cet appareil une hauteur suprieure 2 mtres. Informacin de seguridad Use este producto en entornos sometidos a una temperatura ambiente comprendida entre 0 C (32 F) y 40 C (104 F). Consulte la etiqueta de valores nominales situada en la parte inferior del producto y asegrese de que su adaptador de alimentacin cumple con dichos valores. NO coloque el equipo sobre una superficie irregular o inestable. Solicite asistencia tcnica si la carcasa resulta daada. NO coloque ni deje caer objetos en la parte superior del producto y no introduzca objetos extraos dentro de l. NO exponga el equipo a lquidos, lluvia o humedad, ni lo use cerca de ninguno de tales elementos. NO use el mdem durante tormentas elctricas. Para evitar que el sistema se sobrecaliente, no cubra las ranuras de ventilacin del producto. NO cubra los orificios de ventilacin del equipo de sobremesa para evitar que el sistema se caliente en exceso. No intente reparar la fuente de alimentacin personalmente si se avera. Pngase en contacto con un tcnico de mantenimiento autorizado o con su distribuidor. A fin de evitar posibles descargas elctricas, desconecte el cable de alimentacin de la toma de suministro elctrico antes de cambiar la posicin del sistema. NO monte este equipo a una altura superior a 2 metros. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.