happy holidays!

FCC ID: MSQBE201D2 Intel BE201

by: ASUSTeK Computer Inc latest update: 2024-11-19 model: BE201D2

Forty One grants have been issued under this FCC ID from 06/14/2024 to 11/19/2024 (this is one of two hundred and eighty-four releases in 2024 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, warrantee terms, troubleshooting guides, drivers, & password defaults.
permalink for this FCC identifier
product lifecycle: new release
|
|
|   
eg for Slack usage
app s submitted / available

frequency equipment class purpose
1 2024-11-19 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
2 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2422 ~ 2462 DTS - Digital Transmission System
5 2024-11-07 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
6 2422 ~ 2462 DTS - Digital Transmission System
7 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
9 2024-10-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
11 2422 ~ 2462 DTS - Digital Transmission System
12 5845 ~ 5885 NII - Unlicensed National Information Infrastructure TX
13 2024-10-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
14 2422 ~ 2462 DTS - Digital Transmission System
15 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
16 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
17 2024-09-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
18 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
19 2422 ~ 2462 DTS - Digital Transmission System
20 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
21 2024-09-23 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
22 2024-09-22 2422 ~ 2462 DTS - Digital Transmission System
23 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2422 ~ 2462 DTS - Digital Transmission System
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
28 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
29 2024-07-26 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
32 2422 ~ 2462 DTS - Digital Transmission System
33 2024-07-25 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
34 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
35 2422 ~ 2462 DTS - Digital Transmission System
36 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
37 2024-06-14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
38 5855 ~ 5855 NII - Unlicensed National Information Infrastructure TX
39 JBP - Part 15 Class B Computing Device Peripheral
40 6665 ~ 6665 6CD - 15E 6 GHz Low Power Dual Client
41 2422 ~ 2462 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2024-11-19
various 2024-11-07
various 2024-10-29
various 2024-10-03
various 2024-09-24
various 2024-09-23
various 2024-09-22
various 2024-07-26
various 2024-07-25
various 2024-06-14
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various 0005819321
various Physical Address 1F, No. 15, Lide Rd.
various Beitou, Taipei, N/A 112
various Beitou, Taipei, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code BE201D2
app s Person at the applicant's address to receive grant or for contact
various Name J******** Y********
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various DEKRA
various Eurofins E&E Wireless Taiwan Co., Ltd.
various Eurofins
various DEKRA Testing and Certification Co., Ltd.
various Name P**** T****
various K******** L****
various F**** L********
various L******** L****
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No. 140-1, Changan Street, Bade District
various No. 85, Wenlin St, Linkou Dist.
various New Taipei City
various Taoyuan
various Taoyuan City
various New Taipei City, 24457
various Taiwan
various Telephone Number 886-2********
various 03271********
various 886-3********
various 02260********
various E-mail p******@dekra.com
various k******@dekra.com
various F******@cpt.eurofinsasia.com
various f******@cpt.eurofinsasia.com
various l******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/04/2025
various04/27/2025
various03/24/2025
various03/22/2025
various01/23/2025
various01/22/2025
various12/11/2024
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousYes
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
various6CD - 15E 6 GHz Low Power Dual Client
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel BE201
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousYes
variousGrant CommentsModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5606C, K5606C, V5606C and P5606CC with the antenna Luxshare-ICT, part no. LA9RF593-NB-H, LA9RF594-NB-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.17 W/kg and 1.50 W/kg respectively.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5606C, K5606C, V5606C and P5606CC with the antenna Luxshare-ICT, part no. LA9RF593-NB-H, LA9RF594-NB-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.14 W/kg and 1.50 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5606C, K5606C, V5606C and P5606CC with the antenna Luxshare-ICT, part no. LA9RF593-NB-H, LA9RF594-NB-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.50 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5606C, K5606C, V5606C and P5606CC with the antenna Luxshare-ICT, part no. LA9RF593-NB-H, LA9RF594-NB-H. The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 1.50 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11-5.15 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX3405C, RX3405C, BX3405C and UX3405CA, with permanently reducing power through firmware that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.598 W/kg, respectively. Antenna used - PIFA with Part number: 14008-05740100, TZ2709E (aux) and 14008-05740200, TD2709D (main), manufactured by Pulse.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX3405C, RX3405C, BX3405C and UX3405CA, with permanently reducing power through firmware that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 1.598 W/kg, respectively. Antenna used - PIFA with Part number: 14008-05740100, TZ2709E (aux) and 14008-05740200, TD2709D (main), manufactured by Pulse.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX3405C, RX3405C, BX3405C and UX3405CA, with permanently reducing power through firmware that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.81 W/kg and 1.598 W/kg, respectively. Antenna used - PIFA with Part number: 14008-05740100, TZ2709E (aux) and 14008-05740200, TD2709D (main), manufactured by Pulse.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88-5.02 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX3405C, RX3405C, BX3405C and UX3405CA, with permanently reducing power through firmware that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.11 W/kg and 1.598 W/kg, respectively. Antenna used - PIFA with Part number: 14008-05740100, TZ2709E (aux) and 14008-05740200, TD2709D (main), manufactured by Pulse.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX8406C, RX8406C, and BX8406C with the antenna Pulse Electronics part no. 14008-05930000 (TZ2717E), 14008-05930200 (TZ2981E). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 1.26 W/kg respectively.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB447498 an antenna(s): PIFA reference antenna (4.88-5.02 dBi). Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX8406C, RX8406C, and BX8406C with the antenna Pulse Electronics part no. 14008-05930000 (TZ2717E), 14008-05930200 (TZ2981E). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 1.26 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX8406C, RX8406C, and BX8406C with the antenna Pulse Electronics part no. 14008-05930000 (TZ2717E), 14008-05930200 (TZ2981E). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.26 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11-5.15dBi). Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX8406C, RX8406C, and BX8406C with the antenna Pulse Electronics part no. 14008-05930000 (TZ2717E), 14008-05930200 (TZ2981E). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.57 W/kg and 1.26 W/kg respectively.
variousThis C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. For 38mm SKU: The highest reported Body and Simultaneous SAR values are 0.17 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
variousThis C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. For 38mm power SKU: The highest reported Body and Simultaneous SAR values are 0.51 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 38mm minimum test separation distance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
variousThis C2PC adds a) portable SAR for the PIFA antenna to establish minimum antenna to user distances at a maximum SAR value less than 0.8Wkg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01, b) adds two mobile antennas (monopole and dipole), c) and identifies the minimum CBP value allowed for the 6 GHz band. Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. For 38mm SKU: The highest reported Body and Simultaneous SAR values are 0.79 W/kg and 1.59 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 38mm minimum test separation distance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: S5606S, K5606S, V5606S, P5606CS, S5606SA, K5606SA, V5606SA, P5606CSA, with permanently reducing the power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 1.0 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF594-NB-H (aux) and LA9RF593-NB-H (main), manufactured by Luxshare-ICT.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88-5.02 dBi). This C2PC filing establishes portable category for ASUS platform with models: S5606S, K5606S, V5606S, P5606CS, S5606SA, K5606SA, V5606SA, P5606CSA, with permanently reducing the power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.0 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF594-NB-H (aux) and LA9RF593-NB-H (main), manufactured by Luxshare-ICT.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: S5606S, K5606S, V5606S, P5606CS, S5606SA, K5606SA, V5606SA, P5606CSA, with permanently reducing the power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.54 W/kg and 1.0 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF594-NB-H (aux) and LA9RF593-NB-H (main), manufactured by Luxshare-ICT.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11-5.15 dBi). This C2PC filing establishes portable category for ASUS platform with models: S5606S, K5606S, V5606S, P5606CS, S5606SA, K5606SA, V5606SA, P5606CSA, with permanently reducing the power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.1 W/kg and 1.0 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF594-NB-H (aux) and LA9RF593-NB-H (main), manufactured by Luxshare-ICT.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5406S, K5406S, V5406S, P5406CS, Q423S, S5406SA, K5406SA, V5406SA, P5406CSA and Q423SA with the antenna Luxshare-ICT, part no. LA9RF592-NB-H (14008-06300000), LA9RF591-NB-H (14008-06300100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.04 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11-5.15 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5406S, K5406S, V5406S, P5406CS, Q423S, S5406SA, K5406SA, V5406SA, P5406CSA and Q423SA with the antenna Luxshare-ICT, part no. LA9RF592-NB-H (14008-06300000), LA9RF591-NB-H (14008-06300100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 1.27 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5406S, K5406S, V5406S, P5406CS, Q423S, S5406SA, K5406SA, V5406SA, P5406CSA and Q423SA with the antenna Luxshare-ICT, part no. LA9RF592-NB-H (14008-06300000), LA9RF591-NB-H (14008-06300100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.44 W/kg and 1.27 W/kg respectively.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models S5406S, K5406S, V5406S, P5406CS, Q423S, S5406SA, K5406SA, V5406SA, P5406CSA and Q423SA with the antenna Luxshare-ICT, part no. LA9RF592-NB-H (14008-06300000), LA9RF591-NB-H (14008-06300100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.27 W/kg respectively.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88-5.02 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable; as well as enabling TAS feature. SAR measurement and TAS validation were performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX5606S, BX5606S and RX5606S with the antenna INPAQ, part no. WA-P-LE-02-318 (14008-06010200), WA-P-LE-02-264 (14008-06010100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.84 W/kg and 0.8 W/kg respectively.  
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX5606S, BX5606S and RX5606S with the antenna INPAQ, part no. WA-P-LE-02-318 (14008-06010200), WA-P-LE-02-264 (14008-06010100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.37 W/kg and 0.8 W/kg respectively.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX5606S, BX5606S and RX5606S with the antenna INPAQ, part no. WA-P-LE-02-318 (14008-06010200), WA-P-LE-02-264 (14008-06010100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.82 W/kg and 0.8 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through BIOS respectively and to request approval for portable category specific host ASUS notebook PC, models UX5606S, BX5606S and RX5606S with the antenna INPAQ, part no. WA-P-LE-02-318 (14008-06010200), WA-P-LE-02-264 (14008-06010100). The detail information please refer to the filing. Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. The highest reported Body and Simultaneous SAR values are 0.42 W/kg and 0.8 W/kg respectively.
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11-5.15 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.28 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88-5.02 dBi). This C2PC filing establishes portable category for ASUS platform with models: UX5406S, BX5406S and RX5406S, with permanently reducing power through BIOS that cannot be changeable. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.75 W/kg and 1.28 W/kg, respectively. Antenna used - PIFA with Part number: LA9RF575-CS-H (aux) and LA9RF574-CS-H (main), manufactured by LUXSHARE-ICT.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi).
variousModular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11-5.15 dBi).
variousPower Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88-5.02 dBi).
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi).
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Eurofins E&E Wireless Taiwan Co., Ltd.
various Intel Corporation S.A.S.
various Name M****** L****
various F**** L********
various N****** A******
various F**** L****
various Telephone Number +886-******** Extension:
various +886-********
various +886-********
various 00334********
various 886-3********
various +886-********
various Fax Number +886-********
various +886-********
various +886-********
various 886-3********
various E-mail m******@dekra.com
various F******@cpt.eurofinsasia.com
various n******@intel.com
various f******@cpt.eurofinsasia.com
various F******@eurofins.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.142
1 2 15E CC MO 5190 5230 0.243
1 3 15E CC MO 5210 5210 0.173
1 4 15E CC MO ND 5250 5250 0.113
1 5 15E CC MO ND 5260 5320 0.145
1 6 15E CC MO ND 5270 5310 0.242
1 7 15E CC MO ND 5290 5290 0.181
1 8 15E CC MO ND 5500 5700 0.142
1 9 15E CC MO ND 5510 5670 0.233
1 1 15E CC MO ND 5710 5710 0.248
1 11 15E CC MO ND 5720 5720 0.127
1 12 15E CC MO ND 5690 5690 0.247
1 13 15E CC MO ND 5530 5610 0.235
1 14 15E CC MO ND 5570 5570 0.185
1 15 15E CC MO 5745 5825 0.455
1 16 15E CC MO 5755 5795 0.437
1 17 15E CC MO 5775 5775 0.288
1 18 15E CC EP MO 5845 5885 0.318
1 19 15E CC EP MO 5835 5875 0.681
1 2 15E CC EP MO 5855 5855 0.975
1 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC EP MO 5955 7115 0.013
2 2 15E CC EP MO 5965 7085 0.025
2 3 15E CC EP MO 5985 7025 0.05
2 4 15E CC EP MO 6025 6985 0.096
2 5 15E CC EP MO 6105 6905 0.165
2 6 15E CC EP MO 5955 6415 0.583
2 7 15E CC EP MO 5965 6405 0.951
2 8 15E CC EP MO 5985 6385 0.937
2 9 15E CC EP MO 6025 6345 0.768
2 1 15E CC EP MO 6105 6265 0.404
2 11 15E CC EP MO 6535 6855 0.555
2 12 15E CC EP MO 6565 6845 0.939
2 13 15E CC EP MO 6625 6785 0.855
2 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.033
4 2 15C CC MO 2412 2472 0.973
4 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.142
5 2 15E CC MO 5190 5230 0.243
5 3 15E CC MO 5210 5210 0.173
5 4 15E CC MO ND 5250 5250 0.113
5 5 15E CC MO ND 5260 5320 0.145
5 6 15E CC MO ND 5270 5310 0.242
5 7 15E CC MO ND 5290 5290 0.181
5 8 15E CC MO ND 5500 5700 0.142
5 9 15E CC MO ND 5510 5670 0.233
5 1 15E CC MO ND 5710 5710 0.248
5 11 15E CC MO ND 5720 5720 0.127
5 12 15E CC MO ND 5690 5690 0.247
5 13 15E CC MO ND 5530 5610 0.235
5 14 15E CC MO ND 5570 5570 0.185
5 15 15E CC MO 5745 5825 0.455
5 16 15E CC MO 5755 5795 0.437
5 17 15E CC MO 5775 5775 0.288
5 18 15E CC EP MO 5845 5885 0.318
5 19 15E CC EP MO 5835 5875 0.681
5 2 15E CC EP MO 5855 5855 0.975
5 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.033
6 2 15C CC MO 2412 2472 0.973
6 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC EP MO 5955 7115 0.013
8 2 15E CC EP MO 5965 7085 0.025
8 3 15E CC EP MO 5985 7025 0.05
8 4 15E CC EP MO 6025 6985 0.096
8 5 15E CC EP MO 6105 6905 0.165
8 6 15E CC EP MO 5955 6415 0.583
8 7 15E CC EP MO 5965 6405 0.951
8 8 15E CC EP MO 5985 6385 0.937
8 9 15E CC EP MO 6025 6345 0.768
8 1 15E CC EP MO 6105 6265 0.404
8 11 15E CC EP MO 6535 6855 0.555
8 12 15E CC EP MO 6565 6845 0.939
8 13 15E CC EP MO 6625 6785 0.855
8 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC EP MO 5955 7115 0.013
10 2 15E CC EP MO 5965 7085 0.025
10 3 15E CC EP MO 5985 7025 0.05
10 4 15E CC EP MO 6025 6985 0.165
10 5 15E CC EP MO 6105 6905 0.165
10 6 15E CC EP MO 5955 6415 0.583
10 7 15E CC EP MO 5965 6405 0.951
10 8 15E CC EP MO 5985 6385 0.937
10 9 15E CC EP MO 6025 6345 0.768
10 1 15E CC EP MO 6105 6265 0.404
10 11 15E CC EP MO 6535 6855 0.555
10 12 15E CC EP MO 6565 6845 0.939
10 13 15E CC EP MO 6625 6785 0.855
10 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C MO 2402 2480 0.033
11 2 15C CC MO 2412 2472 0.973
11 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.142
12 2 15E CC MO 5190 5230 0.243
12 3 15E CC MO 5210 5210 0.173
12 4 15E CC MO ND 5250 5250 0.113
12 5 15E CC MO ND 5260 5320 0.145
12 6 15E CC MO ND 5270 5310 0.242
12 7 15E CC MO ND 5500 5700 0.181
12 8 15E CC MO ND 5500 5700 0.142
12 9 15E CC MO ND 5510 5670 0.233
12 1 15E CC MO ND 5710 5710 0.248
12 11 15E CC MO ND 5720 5720 0.127
12 12 15E CC MO ND 5690 5690 0.247
12 13 15E CC MO ND 5530 5610 0.235
12 14 15E CC MO ND 5570 5570 0.185
12 15 15E CC MO 5745 5825 0.455
12 16 15E CC MO 5755 5795 0.437
12 17 15E CC MO 5775 5775 0.288
12 18 15E CC EP MO 5845 5885 0.318
12 19 15E CC EP MO 5835 5875 0.681
12 2 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.033
14 2 15C CC MO 2412 2472 0.973
14 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E CC EP MO 5955 7115 0.013
15 2 15E CC EP MO 5965 7085 0.025
15 3 15E CC EP MO 5985 7025 0.05
15 4 15E CC EP MO 6025 6985 0.096
15 5 15E CC EP MO 6105 6905 0.165
15 6 15E CC EP MO 5955 6415 0.583
15 7 15E CC EP MO 5965 6405 0.951
15 8 15E CC EP MO 5985 6385 0.937
15 9 15E CC EP MO 6025 6345 0.768
15 1 15E CC EP MO 6105 6265 0.404
15 11 15E CC EP MO 6535 6855 0.555
15 12 15E CC EP MO 6565 6845 0.939
15 13 15E CC EP MO 6625 6785 0.855
15 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.142
16 2 15E CC MO 5190 5230 0.243
16 3 15E CC MO 5210 5210 0.173
16 4 15E CC MO ND 5250 5250 0.113
16 5 15E CC MO ND 5260 5320 0.145
16 6 15E CC MO ND 5270 5310 0.242
16 7 15E CC MO ND 5290 5290 0.181
16 8 15E CC MO ND 5500 5700 0.142
16 9 15E CC MO ND 5510 5670 0.233
16 1 15E CC MO ND 5710 5710 0.248
16 11 15E CC MO ND 5720 5720 0.127
16 12 15E CC MO ND 5690 5690 0.247
16 13 15E CC MO ND 5530 5610 0.235
16 14 15E CC MO ND 5570 5570 0.185
16 15 15E CC MO 5745 5825 0.455
16 16 15E CC MO 5755 5795 0.437
16 17 15E CC MO 5775 5775 0.288
16 18 15E CC EP MO 5845 5885 0.318
16 19 15E CC EP MO 5835 5875 0.681
16 2 15E CC EP MO 5855 5855 0.975
16 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC EP MO 5955 7115 0.013
18 2 15E CC EP MO 5965 7085 0.025
18 3 15E CC EP MO 5985 7025 0.05
18 4 15E CC EP MO 6025 6985 0.096
18 5 15E CC EP MO 6105 6905 0.165
18 6 15E CC EP MO 5955 6415 0.583
18 7 15E CC EP MO 5965 6405 0.951
18 8 15E CC EP MO 5985 6385 0.937
18 9 15E CC EP MO 6025 6345 0.768
18 1 15E CC EP MO 6105 6265 0.404
18 11 15E CC EP MO 6535 6855 0.555
18 12 15E CC EP MO 6565 6845 0.939
18 13 15E CC EP MO 6625 6785 0.855
18 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.033
19 2 15C CC MO 2412 2472 0.973
19 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.142
20 2 15E CC MO 5190 5230 0.243
20 3 15E CC MO 5210 5210 0.173
20 4 15E CC MO ND 5250 5250 0.113
20 5 15E CC MO ND 5260 5320 0.145
20 6 15E CC MO ND 5270 5310 0.242
20 7 15E CC MO ND 5290 5290 0.181
20 8 15E CC MO ND 5500 5700 0.142
20 9 15E CC MO ND 5510 5670 0.233
20 1 15E CC MO ND 5710 5710 0.248
20 11 15E CC MO ND 5720 5720 0.127
20 12 15E CC MO ND 5690 5690 0.247
20 13 15E CC MO ND 5530 5610 0.235
20 14 15E CC MO ND 5570 5570 0.185
20 15 15E CC MO 5745 5825 0.455
20 16 15E CC MO 5755 5795 0.437
20 17 15E CC MO 5775 5775 0.288
20 18 15E CC EP MO 5845 5885 0.318
20 19 15E CC EP MO 5835 5875 0.681
20 2 15E CC EP MO 5855 5855 0.975
20 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC MO 5180 5240 0.142
21 2 15E CC MO 5190 5230 0.243
21 3 15E CC MO 5210 5210 0.173
21 4 15E CC MO ND 5250 5250 0.113
21 5 15E CC MO ND 5260 5320 0.145
21 6 15E CC MO ND 5270 5310 0.242
21 7 15E CC MO ND 5290 5290 0.181
21 8 15E CC MO ND 5500 5700 0.142
21 9 15E CC MO ND 5510 5670 0.233
21 1 15E CC MO ND 5710 5710 0.248
21 11 15E CC MO ND 5720 5720 0.127
21 12 15E CC MO ND 5690 5690 0.247
21 13 15E CC MO ND 5530 5610 0.235
21 14 15E CC MO ND 5570 5570 0.185
21 15 15E CC MO 5745 5825 0.455
21 16 15E CC MO 5755 5795 0.437
21 17 15E CC MO 5775 5775 0.288
21 18 15E CC EP MO 5845 5885 0.318
21 19 15E CC EP MO 5835 5875 0.681
21 2 15E CC EP MO 5855 5855 0.975
21 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.033
22 2 15C CC MO 2412 2472 0.973
22 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.142
23 2 15E CC MO 5190 5230 0.243
23 3 15E CC MO 5210 5210 0.173
23 4 15E CC MO ND 5250 5250 0.113
23 5 15E CC MO ND 5260 5320 0.145
23 6 15E CC MO ND 5270 5310 0.242
23 7 15E CC MO ND 5290 5290 0.181
23 8 15E CC MO ND 5500 5700 0.142
23 9 15E CC MO ND 5510 5670 0.233
23 1 15E CC MO ND 5710 5710 0.248
23 11 15E CC MO ND 5720 5720 0.127
23 12 15E CC MO ND 5690 5690 0.247
23 13 15E CC MO ND 5530 5610 0.235
23 14 15E CC MO ND 5570 5570 0.185
23 15 15E CC MO 5745 5825 0.455
23 16 15E CC MO 5755 5795 0.437
23 17 15E CC MO 5775 5775 0.288
23 18 15E CC EP MO 5845 5885 0.318
23 19 15E CC EP MO 5835 5875 0.681
23 2 15E CC EP MO 5855 5855 0.975
23 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.033
25 2 15C CC MO 2412 2472 0.973
25 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15E CC EP MO 5955 7115 0.013
27 2 15E CC EP MO 5965 7085 0.025
27 3 15E CC EP MO 5985 7025 0.05
27 4 15E CC EP MO 6026 6985 0.096
27 5 15E CC EP MO 6105 6905 0.165
27 6 15E CC EP MO 5955 6415 0.583
27 7 15E CC EP MO 5965 6405 0.951
27 8 15E CC EP MO 5985 6385 0.937
27 9 15E CC EP MO 6025 6345 0.768
27 1 15E CC EP MO 6105 6265 0.404
27 11 15E CC EP MO 6535 6855 0.555
27 12 15E CC EP MO 6565 6845 0.939
27 13 15E CC EP MO 6625 6785 0.855
27 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC EP MO 5955 7115 0.013
28 2 15E CC EP MO 5965 7085 0.025
28 3 15E CC EP MO 5985 7025 0.05
28 4 15E CC EP MO 6025 6985 0.096
28 5 15E CC EP MO 6105 6905 0.165
28 6 15E CC EP MO 5955 6415 0.583
28 7 15E CC EP MO 5965 6405 0.951
28 8 15E CC EP MO 5985 6385 0.937
28 9 15E CC EP MO 6025 6345 0.768
28 1 15E CC EP MO 6105 6265 0.404
28 11 15E CC EP MO 6535 6855 0.555
28 12 15E CC EP MO 6565 6845 0.939
28 13 15E CC EP MO 6625 6785 0.855
28 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5180 5240 0.142
29 2 15E CC MO 5190 5230 0.243
29 3 15E CC MO 5210 5210 0.173
29 4 15E CC MO ND 5250 5250 0.113
29 5 15E CC MO ND 5260 5320 0.145
29 6 15E CC MO ND 5270 5310 0.242
29 7 15E CC MO ND 5290 5290 0.181
29 8 15E CC MO ND 5500 5700 0.142
29 9 15E CC MO ND 5510 5670 0.233
29 1 15E CC MO ND 5710 5710 0.248
29 11 15E CC MO ND 5720 5720 0.127
29 12 15E CC MO ND 5690 5690 0.247
29 13 15E CC MO ND 5530 5610 0.235
29 14 15E CC MO ND 5570 5570 0.185
29 15 15E CC MO 5745 5825 0.455
29 16 15E CC MO 5755 5795 0.437
29 17 15E CC MO 5775 5775 0.288
29 18 15E CC EP MO 5845 5885 0.318
29 19 15E CC EP MO 5835 5875 0.681
29 2 15E CC EP MO 5855 5855 0.975
29 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15E CC EP MO 5955 7115 0.013
31 2 15E CC EP MO 5965 7085 0.025
31 3 15E CC EP MO 5985 7025 0.05
31 4 15E CC EP MO 6025 6985 0.096
31 5 15E CC EP MO 6105 6905 0.165
31 6 15E CC EP MO 5955 6415 0.583
31 7 15E CC EP MO 5965 6405 0.951
31 8 15E CC EP MO 5985 6385 0.937
31 9 15E CC EP MO 6025 6345 0.768
31 1 15E CC EP MO 6105 6265 0.404
31 11 15E CC EP MO 6535 6855 0.555
31 12 15E CC EP MO 6565 6845 0.939
31 13 15E CC EP MO 6625 6785 0.855
31 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.033
32 2 15C CC MO 2412 2472 0.973
32 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5180 5240 0.142
33 2 15E CC MO 5190 5230 0.243
33 3 15E CC MO 5210 5210 0.173
33 4 15E CC MO ND 5250 5250 0.113
33 5 15E CC MO ND 5260 5320 0.145
33 6 15E CC MO ND 5270 5310 0.242
33 7 15E CC MO ND 5290 5290 0.181
33 8 15E CC MO ND 5500 5700 0.142
33 9 15E CC MO ND 5510 5670 0.233
33 1 15E CC MO ND 5710 5710 0.248
33 11 15E CC MO ND 5720 5720 0.127
33 12 15E CC MO ND 5690 5690 0.247
33 13 15E CC MO ND 5530 5610 0.235
33 14 15E CC MO ND 5570 5570 0.185
33 15 15E CC MO 5745 5825 0.455
33 16 15E CC MO 5755 5795 0.437
33 17 15E CC MO 5775 5775 0.288
33 18 15E CC EP MO 5845 5885 0.318
33 19 15E CC EP MO 5835 5875 0.681
33 2 15E CC EP MO 5855 5855 0.975
33 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402 2480 0.033
35 2 15C CC MO 2412 2472 0.973
35 3 15C CC MO 2422 2462 0.984
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E CC EP MO 5955 7115 0.013
36 2 15E CC EP MO 5965 7085 0.025
36 3 15E CC EP MO 5985 7025 0.05
36 4 15E CC EP MO 6025 6985 0.096
36 5 15E CC EP MO 6105 6905 0.165
36 6 15E CC EP MO 5955 6415 0.583
36 7 15E CC EP MO 5965 6405 0.951
36 8 15E CC EP MO 5985 6385 0.937
36 9 15E CC EP MO 6025 6345 0.768
36 1 15E CC EP MO 6105 6265 0.404
36 11 15E CC EP MO 6535 6855 0.555
36 12 15E CC EP MO 6565 6845 0.939
36 13 15E CC EP MO 6625 6785 0.855
36 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0330000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15E CC MO 5180 5240 0.142
38 2 15E CC MO 5190 5230 0.243
38 3 15E CC MO 5210 5210 0.173
38 4 15E CC MO ND 5250 5250 0.113
38 5 15E CC MO ND 5260 5320 0.145
38 6 15E CC MO ND 5270 5310 0.242
38 7 15E CC MO ND 5290 5290 0.181
38 8 15E CC MO ND 5500 5700 0.142
38 9 15E CC MO ND 5510 5670 0.233
38 1 15E CC MO ND 5710 5710 0.248
38 11 15E CC MO ND 5720 5720 0.127
38 12 15E CC MO ND 5690 5690 0.247
38 13 15E CC MO ND 5530 5610 0.235
38 14 15E CC MO ND 5570 5570 0.185
38 15 15E CC MO 5745 5825 0.455
38 16 15E CC MO 5755 5795 0.437
38 17 15E CC MO 5775 5775 0.288
38 18 15E CC EP MO 5845 5885 0.318
38 19 15E CC EP MO 5835 5875 0.681
38 2 15E CC EP MO 5855 5855 0.975
38 21 15E CC EP MO 5815 5815 0.356
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E 5955 7115 0.013
40 2 15E CC EP MO 5965 7085 0.025
40 3 15E CC EP MO 5985 7025 0.05
40 4 15E CC EP MO 6025 6985 0.096
40 5 15E CC EP MO 6105 6905 0.165
40 6 15E CC EP MO 5955 6415 0.583
40 7 15E CC EP MO 5965 6405 0.951
40 8 15E CC EP MO 5985 6385 0.937
40 9 15E CC EP MO 6025 6345 0.768
40 1 15E CC EP MO 6105 6265 0.404
40 11 15E CC EP MO 6535 6855 0.555
40 12 15E CC EP MO 6565 6845 0.939
40 13 15E CC EP MO 6625 6785 0.855
40 14 15E CC EP MO 6665 6665 0.561
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.033
41 2 15C CC MO 2412 2472 0.973
41 3 15C CC MO 2422 2462 0.984

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC