Any questions? Contact:
Support@avantree.com Telephone Support (Mon-Fri):
(Response Time: 4-24h, excl. holidays) USA / CANADA +1 800 232 2078 (EN, PST 9am-5pm) UK: +44 20 8068 2023 (EN, CET 10am-7pm) Germany: +49 32221097297 (DE, CET 10am-7pm) Italy: +39 06 9480 3330 (IT, CET 9:30am-12:30am) France: + 33 176340312 (FR, CET 8am-10am) Spain: + 34 931786261 (ES, CET 2:30pm-4:30pm) Asia: + 86 755 8228 1190 / 7741-7746 (CN & EN, BJT 9am-5pm) Australia: + 61 2 8310 9897 (CN & EN, BJT 9am-5pm) Self-service Support:
100+ Step by step video Guide youtube.com/avantree/playlists 300+ FAQ: support.avantree.com 6. Auto Power On/Off function When powering on the device by pressing and holding the MFB for 4 seconds, the Auto Power On function is activated. When not in use, the 10BS will Auto Power off. The 10BS will turn on again automatically when you open your car door. Auto Power off After exiting your car, the 10BS will disconnect from your phone and then automatically power off after about 10 minutes. The 10BS can be turned off and the Auto Power On / Off function disabled by pressing and holding the MFB for 4 seconds. 2-3 hours Ah A2DP,AVRCP,HSP,HFP (GPS instruction announcement and music) 6. Funzione Accensione/Spegnimento Automatico Quando si accende manualmente il dispositivo tenendo premuto il pulsante MFB per 4 secondi, si attiva la funzione Accensione automatica. Quando non viene utilizzato, 10BS si spegne automaticamente. 10BS si accender di nuovo automaticamente quando si apre la portiera della macchina. Spegnimento automatico una volta che scendi dallauto e il tuo telefono si disconnette da 10BS, si spegner automaticamente dopo circa 10 minuti. Il dispositivo pu essere spento e la funzione Accensione/Spegnimento Automatico disabilitata tenendo premuto il pulsante MFB per 4 secondi. 2-3 ore Ah A2DP,AVRCP,HSP,HFP 6. Fonction Extinction / Allumage Automatique Lorsque vous mettez votre 10BS sous tension manuellement (en appuyant sur la touche centrale MFB pendant 4 secondes), la fonction Allumage Auto est active : Lorsqu'il n'est pas utilis, le kit 10BS s'teint automatiquement. De mme, il se rallume aussi automatiquement lorsque vous ouvrez la porte de votre voiture. Extinction Automatique lorsque vous quittez votre voiture et que votre tlphone se dconnecte du 10BS, ce dernier s'teint automatiquement aprs 10 minutesenviron. Le 10BS peut tre teint et la fonction "Extinction / Allumage Automatique"
dsactive en appuyant sur le bouton central MFB pendant 4 secondes. A2DP,AVRCP,HSP,HFP 2-3 heures Ah A2DP,AVRCP,HSP,HFP 2-3 Stunden Ah 6. Auto Poweran/aus Funktion Wenn Sie das Gert manuell einschalten, indem Sie den MFB 4 Sekunden lang gedrckt halten, wird die Auto Power an/aus Funktion aktiviert. Wenn der 10BS nicht verwendet wird, schaltet er sich automatisch aus. Der 10BS schaltet sich automatisch wieder ein, wenn Sie Ihre Autotr ffnen. Auto Power aus wenn Sie aus dem Auto aussteigen, und die Verbindung zwischen Ihrem Handy und dem 10BS unterbrochen wird, schaltet sich das Gert automatisch nach ungefhr 10 Minuten aus. Sie knnen das Gert ausschalten, und die Auto Power an/ aus Funktion deaktivieren, indem Sie den MFB 4 Sekunden lang gedrckt halten. Encender/apagar Contestar una llamada Rechazar una llamada Mantener pulsado botn MFB 4s Pulsar MFB una vez Mantener pulsado MFB 2s Finalizar llamada Marcador de voz (funcin del telfono) Volver a marcar Pulsar MFB una vez Pulsar MFB una vez Pulsar MFB dos veces Subir volumen Bajar volumen Silenciar micrfono Quitar silencio del micrfono Activar funcin multipunto Apagar funcin multipunto Pulsar V+ una vez Pulsar V- una vez Pulsar botn Silenciador una vez
(durante una llamada) Pulsar botn de Silencio una vez Mantener pulsado V- 3 segundos Mantener pulsado V+ 3 segundos Transferir llamadas del altavoz al micrfono del telfono Pulsar V- y V+ juntos (durante una llamada) Nota: algunas funciones dependen del mvil y pueden no funcionar con algunos telfonos. El LED se pondr en rojo durante el modo silencio. Contacte con nosotros en support@avantree.com para ms detalles. 6. Funcin "Encendido/apagado automtico"
Cuando usted enciende manualmente el dispositivo manteniendo pulsado el botn MFB durante 4 segundos, se activa la funcin "Auto encendido". Cuando no est en uso, el 10BS se apagar automticamente. El 10BS se volver a encender automticamente cuando se abra la puerta de su coche. Apagado automtico cuando sale del coche y el telfono se desconecta de la 10BS, se apagar automticamente despus de 10 minutos. Se puede apagar el dispositivo y la funcin de "Encendido/apagado automtico"
se desactiva manteniendo pulsado el botn MFB durante 4 segundos.
A2DP,AVRCP,HSP,HFP 2-3 horas Ah Z-PKMN-CK10BS-TTN-V6 FCC Warning:
FCC ID: 2AITF-BTCK-10BS Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter