AXW-T800 / 800R AXW-T1900 / 1900R AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone I NTRODUCTION Axesstel's CDMA2000 1x fixed wireless terminals allow users to "get connected" to voice and data services with unprecedented ease. Powered by QUALCOMM's MSM5105 processor, these terminals provide data service through USB and RS-232 interfaces at rates of up to 153 Kbps. With RJ-11 phone connections, the users can enjoy rich features ranging from basic voice service to caller ID, call waiting, 3 way calling, and analog fax. User-friendly design and 4 LED indicators make these terminals easy to set up and use. Features Convenience Features CDMA-2000 1x (backward compatible to IS-95 A/B) Data service capability (153.6 Kbps max) 4 multi-colored LED indicators (Power, Signal Strength, Call Connection,and Voice Mail) Multi-extension (2 RJ-11 ports) RS-232C and USB Data via Special Connector Dial-Tone and DTMF Generation Desktop or Wall-Mountable Call Waiting, Forwarding, Transfer Three-way Calling Caller ID (displayed on Call ID campatible analog phone) Voice Mail Optional Range-extending Patch Antenna Optional Analog Fax (IS-707-A.7, A.4 backward compatible) World Best CDMA WLL Technology 1 Optional Features Call Waiting ---------------------------26 Three-Way Calling ------------------26 Call Forwarding ----------------------26 Caller ID -------------------------------26 Voice Mail Service ------------------ 26 Miscellaneous Menu Options Table ---------------- 28 Troubleshooting --------------------- 28 Specifications ------------------------ 29 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R T ABLES OF CONTENTS Safety Precautions ----------------- 3 Checking Parts ---------------------- 4 Terminal Information --------------- 5 Getting to know the terminal----- 8 Basic Operation Power On/Off -------------------------12 Making Calls --------------------------12 Receiving Calls ----------------------13 Advanced Features Adjusting voice volume-------------14 Setting alarm--------------------------14 Setting 1 minute----------------------14 Setting connection alert------------ 15 Setting voice privacy alert--------- 15 Setting caller ID mode-------------- 16 Setting autosend time---------------16 Setting DTMF length----------------16 Change the Lock Code ------------ 17 Restricting Outgoing Calls -------- 17 Restricting international calls------18 Restricting long distance calls-- --18 Terminal reset-------------------------19 Data service---------------------------19 FAX Service (Option) Fax Set-Up ----------------------------22 Sending Fax Messages ----------- 22 Receiving Fax Messages --------- 23 2 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone S AFETY PRECAUTIONS 1. Avoid placing the phone in a dusty location, or near a source of gas or fire. 2. Don not shake, hit or drop the phone. 3. To clean the outside of the phone, use only a soft, dry cloth. The chemicals in alcohol, benzine or acetone can damage the surface of the phone. 4. Do not twist or pull the cables. 5. Do not disassemble the terminal. 6. DO NOT use the power adapter if:
- The power cord is damaged.
- The adaptor has been damaged in any way. 7. Use only the AXESSTEL provided adapter. Do not use the AXESSTEL adapter for any other purpose. 8. Use only the AXESSTEL provided antenna. Do not use the antenna for any other purpose. 9. Frequency and length of use can affect the life of the self-charging battery. Contact your customer service if the battery is not operating properly. 10. Use only the designated self-charging battery. Dispose of exhausted batteries properly. Never discard a battery in or near fire or flame. 11. Do not use the terminal near water, for example, near a bathtub, sink, wet basement, or swimming pool. NOTE: The input voltage and the shape of the plug may vary from country to country. World Best CDMA WLL Technology 3 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R C HECKING THE PARTS After opening the package, check to make sure that you have all the parts shown below. If any piece is missing or broken, please call your agent or customer service. Items marked optional may be available only on select models. 1 Fixed Wireless Terminal Main Unit 4 User's Manual 2 Antenna 5 Backup Battery (Optional) 3 AC/DC Adapter and AC Cord 6 RJ-11 Phone Cord 4 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone T ERMINAL INFORMATION How to install internal battery (optional) 1. Open battery cover on the bottom side of the terminal. 2. Connect the DC power cable to terminal. 3. Insert the battery pack in the right position between the hold bars. 4. Close the battery cover. 1 4 2 3 Installing the RUIM Card (Optional for AXW-T450R/T800R/T1900R models only) 1. Put the RUIM card into the Socket as shown in the picture. RUIM card World Best CDMA WLL Technology 5 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R Desktop Installation This FWT ACW-T800/T1900 operates by receiving electricity from an electrical outlet or internal battery. 1. Connect the antenna on the back TNC connector of the terminal. 2. Connect a wire telephone to the terminal using an RJ-11 cord. NOTE: Use the telephone compatible to FCC part 68 only. Non-compliant phones may not work properly. 3. Plug the AC Adaptor jack into the DC 15V jack of the Terminal. 4. Plug the AC adaptor plug into an appropriate electrical outlet. 5. Connect an analog facsimile machine to one of the RJ-11 ports. 1 2 4 7 5 8 POWER 0
6 9 3 MENU CLEAR STORE MESSAGE RECALL 6 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone Wall Mount Installation 1. Mark two mounting hole locations to match the screw hole in the back of the terminal. 2. Drill two holes at the marked locations. 3. Tighten the screws until the head is about 5mm from the wall. 5. Plug in the power connector and route the cord in the groove, if needed. 6. Screw the antenna into antenna connector. 7. Hang the terminal on the screw using the two holes in the back. 8. Push the terminal down until the unit is firmly locked into place. World Best CDMA WLL Technology 7 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R G ETTING TO KNOW THE TERMINAL LED indications LED Color Meaning Power Red Power is being supplied by AC adapter Off No power / Power is being supplied by battery. Signal Green Excellant Service Condition Orange Good Service Condition Red Voice through the line is not clear but a call is available. Off No Service Condition Blinking Incoming call Battery Green Orange If there is external power, chrged complete. Is not, full chrging. If there is external power, chrged . Is not, medium chrging. Red Low charged Off No battery is installed. Voice Mail Green You have voice mail message. (If applicable) Off Normal operation without any voice mail message. Sound indications Type Condition Meaning Normal dial Tone continuous Terminal is in service area with adequate signal. No Service Tone 1.5sec on 800 msec off Terminal cannot make or receive calls. (No signal) Outgoing call restriction tone 800 msec on 200 msec off Terminal is configured to block outgoing call but it can receiving incoming calls. Voice mail tone Confirmation Error beep-beep-
beep You have voice mail message. bee-bee-beep When using the menu with ** sequence, this sound alerts successful entry. howling beep When using the menu with ** sequence, this sound alerts error entry. 8 World Best CDMA WLL Technology Basic Operation Power On / Off Making Calls Receiving Calls Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R P OWER ON / OFF There is power switch on the bottom side of the terminal. 1. Turn on the terminal by moving switch to ON position. 2. Press the power switch more than 2 seconds to turn off the FWT. NOTE: When you turn on the terminal, it automatically searches for service signal. When it successfully acquires service signal, it generates dial tone on the handset. Starting with RUIM (AXW-T450R/800R/1900R models only) When the Pin Code of R-UIM Card is turned on, you may need to enter the Pin Code when ou power on the terminal. 1. Lift the receiver of the analog telephone. 2. Using the numeric keypad of the analog phone, enter Pin Code. Note 1: Pin code checking can be turned on/off. Please see page ___. Note 2: You may enter pin code up to 3 times. After 3 times, you will need to re-start the terminal. Note 3: Default pin code is provided by the service provider. Please contact your service provide in case you do not remember the pin code. 10 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone M AKING CALLS 1. Check to see that your terminal is turned on. 2. Pick up the handset of the phone. 3. If you hear the dial tone, dial the desired telephone number, using the numeric keypad. 4. Wait for about 4 seconds until the call is automatically made by the terminal. Note: Press or button to make all right away after entering the dial number. 5. When the other person answers, begin conversation. Note: If Connection Alert is turned on, a beep is heard when the other person answers your call. 6. To hang up, put the handset back on the phone. 1 2 4 7 5 8 POWER 0
6 9 3 MENU CLEAR STORE MESSAGE RECALL Note 1: Dial number of maximum 32 digits, including and , can be entered. Note 2: To make a call to the pre-programmed emergency number, press and hold for about 2 seconds. An emergency call will be made automatically. World Best CDMA WLL Technology 11 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R R ECEIVING CALLS The terminal signals the telephone(s) to ring when an incoming call is detected. 1. Pick up the telephone handset to answer the call. 2. To disconnect after finished, replace the handset on the phone.. Note 1: Make sure that the attached telephone ringer is enabled. Note 2: When an incoming call comes in, when you are holding the receiver, press any key on the numeric keypad of the phone to answer the call. 12 World Best CDMA WLL Technology Advanced Feature Adjusting voice volume Setting alarm Setting 1 minute alert Setting connection alert Setting caller ID mode Setting autosend time Setting DTMF length Chang the lock code Restricting outgoing calls Restricting long distance calls Restricting international calls Terminal reset Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R A DJUSTING VOICE VOLUME You can control the volume level of the terminal. 1. Pick up the handset. 2. Press . 3. Press to raise or to lower volume. Note: Some telephones may have their own volume control. Use both the terminal and the telephone volume controls to optimize the sound level. S ETTING ALARM Alarm feature can be set to ring at a set time. The phone connected to the terminal will ring. To set up alarm time. 1. Pick up the handset. 2. Press . 3. Enter time (24 hour time). For 2:30PM, enter . To disable alarm 1. Pick up the handset. 2. Press . S ETTING 1 MINUTE ALERT When this feature is enabled, a discrete tone is generated at each one minute interval on the receiver during conversation for both incoming and outgoing calls. This tone is to help the user keep track of the phone usage. To change the setting:
1. Pick up the handset. 2. Press . 3. Press to enable or press to disable. 14 World Best CDMA WLL Technology Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R A DJUSTING VOICE VOLUME You can control the volume level of the terminal. 1. Pick up the handset. 2. Press . 3. Press to raise or to lower volume. Note: Some telephones may have their own volume control. Use both the terminal and the telephone volume controls to optimize the sound level. S ETTING ALARM Alarm feature can be set to ring at a set time. The phone connected to the terminal will ring. To set up alarm time. 1. Pick up the handset. 2. Press . 3. Enter time (24 hour time). For 2:30PM, enter . To disable alarm 1. Pick up the handset. 2. Press . S ETTING 1 MINUTE ALERT When this feature is enabled, a discrete tone is generated at each one minute interval on the receiver during conversation for both incoming and outgoing calls. This tone is to help the user keep track of the phone usage. To change the setting:
1. Pick up the handset. 2. Press . 3. Press to enable or press to disable. 14 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone S ETTING CALLER ID MODE If your phone connected to the terminal is caller ID enabled, you can set the terminal to display the caller identification number or name on the telephones LCD display. 1. Pick up the handset. 2. Press for disable the Caller ID feature. 3. Press for DTMF Standard Type. 4. Press for FSK (Bellcore) type. NOTE: The default setting of Caller ID is DTMF type. S ETTING AUTOSEND TIME When finished entering dial number, the terminal waits a fixed time before attempting to make a call. This auto send time can be changed. 1. Pick up the handset. 2. Press . Then press ~ or . 4~9 seconds or off. 3. Press . For example, to set 5 seconds, press . Note: Default autosend time is 4 seconds. S ETTING DTMF LENGTH Some ARS (Automatic Response Service) requires long DTMF tone. 1. Pick up the handset. 2. Press . 3. Press for long DTMF and for short DTMF. World Best CDMA WLL Technology 15 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R C HANG THE LOCK CODE The lock code prevents the terminal from being used by unauthorized person without your permission. The default lock code is . To change the lock code:
1. Pick up the handset. 2. Press . 3. Enter old 4 digit lock code followed by . For example . Beep sounds as confirmation. If not correct, error tone will sound and the terminal returns to standby mode. 4. Enter new 4 digit lock code followed by . For example . Another beep sounds as confirmation. 5. Re-enter 4 digit lock code followed by . For example . Another beep sounds as confirmation. If not correct, error tone will sound and the terminal returns to standby mode. R ESTRICTING OUTGOING CALLS This feature can be used block outgoing calls from being made, but still wish to receive incoming calls at any time. 1. Pick up the handset. 2. Press . 3. Enter 4 digit lock code. 4. Press to enable or to disable. Note 1: Default lock code is " ". To change, see page 16. Note 2: If someone tries to make a call when outgoing call restriction is enabled, the terminal sounds beep and howler tone. 16 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone R ESTRICTING LONG DISTANCE CALLS This feature can be used block long distance calls from being made, but still wish to receive incoming calls and make local calls. 1. Pick up the handset. 2. Press . 3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby mode. 4. Press to enable or to disable. Note 1: Default lock code is " ". To change, see page 16. Note 2: If someone tries to make a long distance call when outgoing call restriction is enabled, the terminal sounds beep and howler tone. R ESTRICTING INTERNATIONAL CALLS This feature can be used block international calls only, but still wish to receive incoming calls and make domestic and local calls. 1. Pick up the handset. 2. Press . 3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby mode. 4. Press to enable or to disable. Note 1: Default lock code is " ". To change, see page 16. Note 2: If someone tries to make an international call when international call restriction is enabled, the terminal sounds beep and howler tone. World Best CDMA WLL Technology 17 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R T ERMINAL RESET Resets the terminal back to the factory default state. 1. Pick up the handset. 2. Press . 3. Enter 4 digit lock code. If not correct, error tone will sound and the terminal returns to standby mode. 4. Press to reset. Note 1: Default lock code is " ". To change, see page 16. Note 2: This feature is automatically set after 3 seconds with a confirmation tone. D ATA SERVICE Serial Cable & USB Cable T Depending on whether you use a serial cable with 9-pin RS-232 connector or a USB cable, the terminal must be set to appropriate Port setting. 1. Pick up the handset. 2. Press to select Serial cable. 3. Press to select USB cable. Data Port Speed There are three speed options. Use appropriate speed setting for you use. 1. Pick up the handset 2. Press for high speed data service. (HDR 115.2Kbps) 3. Press for low speed data service. (ASYNC 19.2 Kbps) 4. Press for PC FAX. (19.2 Kbps) 18 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone Receive setting To receive an incoming Fax or Data call, the terminal must be configured correctly. 1. Pick up the handset 2. Press to set Voice and Analog Fax. 3. Press to set Received Data once. 4. Press to set Receive PC Fax once. 5. Press to set to Receive PC Fax always. World Best CDMA WLL Technology 19 Analog FAX Service Fax Set-Up Sending Fax Message Receiving Fax Messages AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone F AX SET-UP
* The optional Fax module is required to send or receive fax with analog Fax machine. Connect an analog Fax machine to the terminal with regular RJ-11 phone cord. S ENDING FAX MESSAGE You can send and receive fax messages using a fax machine connected to the terminal. Manual dialing method 1. Load documents to the fax machine. 2. Pick up the handset or press On-Hook button of the fax machine. 3. Press and wait for dial tone. 4. Dial destination fax number when you hear dial tone. Use Pre-digit method to send fax without picking up the handset. 1. Load documents to the fax machine. 2. Pick up the handset or press On-Hook button of the fax machine. 3. Dial and destination fax number in sequence. 4. The terminal makes the call automatically. R ECEIVING FAX MESSAGE You can set the terminal to receive Fax Once or Always. 1. Pick up the handset or press On-hook key of the fax machine. 2. Press to set Receive PC Fax Once. 3. Press to set to Receive PC Fax Always. 4. Wait for a confirmation dial tone. The terminal is ready to receive fax messages. World Best CDMA WLL Technology 21 Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R NOTE1: If you set the terminal to receive Fax always, the terminal will transfer every call to the fax machine connected. If you set the terminal to receive fax once mode, the terminal will transfer the first incoming call to the fax machine and set back to voice call mode automatically. To set the terminal to voice mode. 1. Pick up the handset or press On-Hook key. 2. Press 3. Wait for a confirmation dial tone. 22 World Best CDMA WLL Technology Optional Features Call Waiting Three-Way Calling Caller ID Voice Mail Service Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R C ALL WAITING Call Waiting is a feature, which enables you to be alerted to a second incoming call while you are on the first call of your telephone. Contact your service provider to activate or deactivate Call Waiting. 1. You will hear a beep from the earpiece when a second call is incoming. 2. Press the hook shortly to answer to the second call. 3. Press the hook again to get back to the first call. T HREE-WAY CALLING Three-Way Calling is a feature that enables you to set up a three-way conversation with two other users. Contact your service provider to activate or deactivate Three-way Calling. 1. Place a call. 2. Press the hook shortly and place another call. 3. When the second call is answered, press the hook lightly to start a three-way call. C ALLER ID See Page 26: Setting Caller ID Mode V OICE MAIL SERVICE Voice Mail Service is a feature that allows the terminal to receive voice mail and forward it to your telephone when you press a certain sequence of keypad number. Contact your service provider to activate or deactivate Voice Mail Service. 24 World Best CDMA WLL Technology Miscellaneous Menu Options Table Troubleshooting Specifications Fixed Wireless Phone AXW-T800 / 800R / 1900 / 1900R M ENU OPTIONS TABLE MENU Enter the menu item by pressing ** and the menu option. EXAMPLE REMAKE 1. Sound 1. Voice Volume Control Louder Lower
(louder)
(lower) a confirmatiom beep will sound 3 seconds 2. Setting Alarm
, time(24hr), 3. Setting 1 Minute Alert 4. Setting Connection Alert 5. Voice privacy Alert 2. General 1. Caller ID Off / On Off / On Off / On 0. No Caller ID 1. DTMF Standard 2. FSK(Bellcore) 2. Auto send time 4~9 seconds, 0 OFF 3. DTMF Length Short / long
(11:36 AM)
(2:10PM) Alarm(ringer) rings once each day for 1 min Alerts each minute during conversation Alerts when the call is connection Alerts for voice Privacy When off, must press or to make the call
(off)
(on)
(off)
(on)
(off)
(on)
(no caller id)
(dtmf)
(fsk)
(4 seconds)
(off)
(Short)
(Long) 3. Security 1. Changing Lock Code Old lock code, new lock code, ,new lock code again, To change from " " to "
(confirmation tone) 2. Restricting Outgoing Calls lock code, on or off 3. Restricting International Calls lock code, on or off 4. Restricting Long Distance Calls lock code, on or off If lock code is :
If lock code is :
If lock code is :
(on)
(off)
(on)
(off)
(on)
(off) 5. Terminal Reset lock code, If lock code is :
4. Data Service 1. Port Setting 2. Speed Setting 3. Receive Mode 1. Serial 2. USB 1. HDR (115.2K) 2. Async (19.2K) 3. PC FAX (19.2K) 1. Voice only 2. Data one time 3. Fax one time 4. Fax always
(Serial)
(USB)
(115.2K)
(19.2Kpbs async data)
(19.2Kpbs pc fax) Resets auto send time, alarm, lock code, call restrictions
(outgoing, int'l, long), caller ID type, voice privacy alert, conn ection alert, and 1 minute alert. 26 World Best CDMA WLL Technology AXW-T800 / 800R / 1900 / 1900R Fixed Wireless Phone T ROUBLESHOOTING Troubleshoot the conventional wired telephone In the event you are unable to place or receive telephone calls, first be sure that the connection wire is properly connected to the RJ-11 phone port on the terminal and to the RJ-11 port of the telephone. If unsure whether or not the telephone is operational, connect a telephone, which is known to be operational to the terminal. If service is available with the operational telephone, replace or repair your telephone equipment. If service is still not available, then follow instructions under "Troubleshoot the Fixed Wireless Terminal". Troubleshoot the Fixed Wireless Terminal Check for the appropriate power indication on the LED. If no power, check the adaptor
(or External Power Supply) connection between the electrical outlet and the terminal. Check for the appropriate Received Signal Strength Indication (RSSI), Power, and Message Indication through the designated LED, respectively. S PECIFICATIONS Frequency Range Channel Bandwidth Multi Connection ACW-T800 TX: 824~849MHz RX: 869~894MHz ACW-T1900 TX: 1850~1910 MHz RX: 1930~1990 MHz CDMA 1.25 MHz 4 REN RJ-11 Phone/Analog Fax Port 2 Power Supply (Adapter) Input: AC 110~240V 50~60Hz Output: DC 15V 1A Temperature of operation
-20 ~ +50 degrees C Relative humidity Temperature of storage Dimension 5% ~ 95%
-25 ~ +75 degrees C 200x170x48.5 (mm) Weight (without internal battery) 560g World Best CDMA WLL Technology 27 Safety Information 1 . SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS
.POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cauls e an explosion or fire resulting in bodily injury or even death. INTERFERENCE TO MEDICAL DIVICES Certain electronic equipment may be shielded against RF signal from you wireless phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. RF signals may affect improperly installed or inadequately shielded electronic system in motor vehicles. EXPOSURE TO RF ENERGY Use only the supplied or an approved replacement antenna. Do not touch the antenna unnecessarily when the phone is in use. Do not move the antenna close to, or touching any exposed part of the body when making a call. SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENTS REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless Terminal is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. *
Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model when tested for use at the when worn on the body, as described in this user guide, is 0.823 W/Kg. (Body-worn measurements differ among models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: PH7AXWT800. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAFETY INFORMATION FOR RF EXPOSURE Body worn operation This device was tested for typical body-worn operations with the back of the phone kept 25 mm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 25 mm. separation distance between the users body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received. Including interference that may cause undesired operation. U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if Not installed and used in accordance with the instructions, may cause harmful Interference to radio communications. However, there is no guarantee that interference will not occur in a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet of a circuit different from that to which Increase the separation between the equipment and receiver. the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance. Changes or modification not expressly approved by the party responsible for Compliance could void the users authority to operate the equipment. Connecting of peripherals requires the use of grounded shielded signal cables.