80 gsm wood free paper 80 gsm wood free paper DIE/MATERIAL SPECS:
DIE/MATERIAL SPECS:
Material:
Material:
SBS-24/.61mm/400g C1S SBS-24/.61mm/400g C1S Die Line File:
Die Line File:
IDL_MSKU_DUAL CHARGE N SYNC DOCKS IDL_MSKU_DUAL CHARGE N SYNC DOCKS Artwork File:
Artwork File:
INS_F5Z0489fc_8820fc01933_RevA01_FCC_Insert DIE LAYOUT DIE LAYOUT 33/8 33/8
[86.005]
[86.005]
16 pt PET 16 pt PET 27/8 27/8
[73.025]
[73.025]
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement / Avis dIndustrie Canada This digital apparatus complies with CAN ICES-3(B). Cet appareil numrique conforme la norme NMB-3(B) du Canada. The following paragraphs are required by the FCC and prove that this product meets all regulatory limits with regard to radio interference and radiation exposure. If you use this product as intended you will have no issues with either. FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the product, F5Z0489, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Front Front PR# 41256 File name INS_F5Z0489fc_8820fc01933_RevA01_FCC_Insert SKU# F5Z0489FC P#/mKTG# 8820FC01933 REV.A01 DeSiGneR(S) LYNETTE DaTe 5/22/14 VeRSiOn 04 31/4 31/4
[82.550]
[82.550]
23 23
[584.200]
[584.200]
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. INFoRmAtIoN to USER oF WEmo SmARt LED BULBS:
this device is not intended for use with emergency exits. Not for use with dimmers. Do not use where directly exposed to water. AvIS AUx UtILISAtEURS DAmpoULES DEL INtELLIgENtES WEmo:
Ce produit nest pas destin tre utilis pour les sorties durgence. Ne convient pas pour une utilisation avec variateur. Ne pas utiliser dans les endroits directement exposs leau. INFoRmAtIoN to USER oF WEmo LINk:
Use indoors and in dry location only this product may only be plugged in to socket outlets that are easily accessible AvIS AUx UStILISAtEURS DU LIEN WEmo:
pour usage lintrieur et dans des endroits secs seulement. Ce produit ne doit tre branch que sur des prises de courant faciles daccs. 8820fc01933 Rev. A01 Back Back 8 Pt. SBS 8 Pt. SBS SENT SEPARATELY 83/16 83/16
[207.962]
[207.962]
SENT SEPARATELY 87/8 87/8
[225.425]
[225.425]
7 7
[177.800]
[177.800]
1419/32 1419/32
[370.681]
[370.681]
Front Front 83/8 83/8
[212.883]
[212.883]
Back Back PRINT SPECS:
PRINT SPECS:
Color Plates:
Color Plates:
Finish:
Finish:
Notes:
Notes:
REV REV 0 0 00 00 Core Core Business Unit:
Business Unit:
Program Manager:
Program Manager:
Packaging Engineer:
Packaging Engineer:
Matthew Duffy-LR Matthew Duffy-LR Retail Outside Dimension (Including Hang Tab) Retail Outside Dimension (Including Hang Tab) L x W x D (in):
L x W x D (in):
L x W x D (mm):
L x W x D (mm):
0 x 0 x 0 0 x 0 x 0 0.00 x 0.00 x 0.00 0.00 x 0.00 x 0.00 Blank Size (in):
Blank Size (in):
Blank Size (mm):
Blank Size (mm):
47.348 x 23+3/8 47.348 x 23+3/8 1202.630 x 593.725 1202.630 x 593.725 This dieline works for following skus (if any):
This dieline works for following skus (if any):
F8J136; F8J137 F8J136; F8J137 IN/MM IN/MM PRINT SIDE PRINT SIDE horizontal horizontal Unit:
Unit:
Side Shown:
Side Shown:
Flute/Grain:
Flute/Grain:
Tolerance:+/- 1/32" - 0.8mm Tolerance:+/- 1/32" - 0.8mm Drawing Scale 1:1 Drawing Scale 1:1 RELEASE DATE: 5/16/2014 RELEASE DATE: 5/16/2014 DIELINE:
DIELINE:
Intermediate Intermediate THIS DOCUMENT & THE INFORMATION THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. CONSENT OF BELKIN CORPORATION. IT MUST BE RETURNED UPON REQUEST IT MUST BE RETURNED UPON REQUEST DO NOT PRINT DO NOT PRINT DIE LINES, PRINTERS NOTES DIE LINES, PRINTERS NOTES
.18".18".18".18".18".18".18".18".18".18".18".2".18".18".18".18".2".5"