FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1 (310) 751 5100, declare under our sole responsibility that the product F8M747V2 and F8M741, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is Increase the distance between the equipment and the receiver. connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 10 cm between the radiator and your body IMPORTANT NOTE:
Innovation, Science and Economic Development Canada Statement:
This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body. This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B). nonc dIndustrie Canada Ce dispositif est conforme a la norme CNR- 216 standard dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 10 cm de distance entre la source de rayonnement et votre corps. Safety Instructions:
1. Please read these instructions before using the device to ensure safe and proper use. 2. The wireless charging pad requires a wall adapter 3. It is recommended to only use the wireless charging pad with a wall adapter provided by your smartphone maker (such as Samsung, LG, Apple, etc.), or with a wall adapter from Belkin. Avoid using other chargers whose quality cannot be guaranteed. 4. The wireless charging pad requires a USB wall adapter or USB port rated at 10W (5V/2A) output or more. Plugging into a USB hub, computer, laptop, or USB wall adapter with insufficient power will result in significantly slower charging times. 5. Connect the wall adapter of the wireless charging pad into a socket outlet that is close by and is easy to disconnect from the source. 6. Use indoors and in a dry location only, keep away from wet or damp locations. 7. Keep Wireless Charging Pad and wall adapter away from any liquids or moisture. 8. Unplug the wireless charging pad when unused for long periods of time. 9. Do not store your device in very hot or very cold areas. It is recommended to use your device at room temperatures 10. Caution: If you experience problems with the wireless charging pad, please discontinue use, unplug the wall adapter of the wireless charging pad from the AC socket and contact Belkin for assistance. 11. Do not use if visible defects are observed on the wireless charging pad or wall adapter. Do not attempt to service or disassemble.