FCC ID: K7SF5D7051D Wireless G Plus USB Network Adapter

DX-BUSB Manaul_20071012 Page 1 of 37 Dynex Wireless G USB Network Adapter Connect your desktop or notebook computer to a wireless network User Manual Table of Contents 1 Introduction . 1 Benefits of a Home Network . 1 Advantages of a Wireless Network . 1 Placement of your Wireless Networking Hardware for Optimal Performance . 2 2 Overview . 6 Product Features . 6 Applications and Advantages . 7 Product Specifications . 8 System Requirements . 9 Package Contents . 9 3 Installing and Setting up the Adapter . 10 Step 1: Install. 10 Step 2: Connect. 11 Step 3: Configure. 13 4 Using the Dynex Wireless Networking Utility. 15 Accessing the Dynex Wireless Networking Utility from the Windows System Tray.16 Setting Wireless Network Profiles Securing your Wi-Fi Network . 19 Configuring your Dynex Wireless G USB Network Adapter to use Security. 28 5 Troubleshooting. 41 6 Information . 49 DX-BUSB Manaul_20071012 Page 2 of 37 Introduction Thank you for purchasing the Dynex Wireless G USB Network Adapter (the Adapter). Now you can take advantage of this great new technology and gain the freedom to network your home and office computers wirelessly. This Adapter allows you to connect a desktop or notebook computer to your network. The easy installation and setup will have you networking wirelessly in minutes. Please be sure to read through this User Manual completely, and pay special attention to the section entitled Placement of your Wireless Networking Hardware for Optimal Performance on page 2. Benefits of a Home Network Your Dynex Home Network will allow you to:

Share one high-speed Internet connection with all the computers in your home Share resources, such as files, and hard drives among all the connected computers in your home Share a single printer with the entire family Share documents, music, video, and digital pictures Store, retrieve, and copy files from one computer to another Simultaneously play games online, check Internet email, and chat Advantages of a Wireless Network Here are some of the advantages of setting up a Dynex wireless network:

Mobility youll no longer need a dedicated computer room now you can work on a networked laptop or desktop computer anywhere within your wireless range Easy installation Dynex Easy Installation Wizards make setup simple Flexibility set up and access printers, computers, and other networking devices from anywhere in your home Easy expansion the wide range of Dynex networking products lets you expand your network to include devices such as printers and gaming consoles No cabling required you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office Widespread industry acceptance choose from a wide range of interoperable networking products Placement of your Wireless Networking Hardware for Optimal Performance Your wireless connection will be stronger the closer your computer is to your wireless router (or access point). Typical indoor operating range for your wireless devices is between 100 and 200 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your wireless router (or access point) and connected devices increases. This may or may not DX-BUSB Manaul_20071012 Page 3 of 37 be noticeable to you. As you move farther from your wireless router (or access point), connection speed may decrease. Factors that can weaken signals simply by getting in the way of your networks radio waves are metal appliances or obstructions, and walls. If you have concerns about your networks performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet from the wireless router (or access point) in order to see if distance is the problem. If difficulties persist even at close range, please contact Dynex Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help. 1. Placement of your Wireless Router (or Access Point) Place your wireless router (or access point), the central connection point of your network, as close as possible to the center of your wireless network devices. To achieve the best wireless network coverage for your wireless clients, (i.e. computers enabled by Dynex Wireless Notebook Cards, Wireless Desktop Cards, and Wireless USB Adapters):

Ensure that your wireless routers (or access points) antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your wireless router (or access point) itself is positioned vertically, point the antennas as much as possible in an upward direction. In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor. Try not to place the wireless router (or access point) near a cordless 2.4GHz phone 2. Avoid Obstacles and Interference Avoid placing your wireless router (or access point) near devices that may emit radio noise, such as microwave ovens. Other objects that can inhibit wireless communication can include:

Refrigerators Washers and/or dryers DX-BUSB Manaul_20071012 Page 4 of 37 Metal cabinets Large aquariums Metallic-based, UV-tinted windows If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signals path between your computers and wireless router (or access point). 3. Cordless Phone Placement If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

Try moving cordless phones away from the wireless router (or access point) and your wireless-enabled computers. Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturers information). If this fixes the problem, your phone may be interfering. If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network as possible. For example, change the phone to channel 1 and move your wireless router (or access point) to channel 11. (Your channel selection will vary depending on your region.) See your phones user manual for detailed instructions. If necessary, consider switching to a 900MHz or 5GHz cordless phone. 4. Choose the Quietest Channel for your Wireless Network In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours. Use the Site Survey capabilities of your Wireless Networking Utility to locate any other wireless networks, and move your wireless router (or access point) and computers to a channel as far away from other networks as possible. Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For more Dynex wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important. Secure connections include:

DX-BUSB Manaul_20071012 Page 5 of 37 Virtual Private Network (VPN) connections, often used to connect remotely to an office network The Bring Your Own Access program from America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service Most online banking websites Many commercial websites that require a user name and password to access your account Secure connections can be interrupted by a computers power management setting, which causes it to go to sleep. The simplest solution to avoid this is to simply reconnect by re-running the VPN or AOL software, or by re-logging into the secure website. A second alternative is to change your computers power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting in Windows, see the Power Options item in the Control Panel. If you continue to have difficulty with Secure Connections, VPNs, and AOL, please review steps 14 above to be sure you have addressed these issues. For more information regarding our networking products, visit our website at www.Dynexsupport.com or call Dynex Technical Support. Overview Product Features The Adapter complies with the IEEE 802.11g standard in order to communicate with other 802.11g-compliant wireless devices at 54Mbps. The Adapter is compatible with all 802.11g devices as well as other 802.11b products at 11Mbps. 802.11g products operate on the same 2.4GHz frequency band as 802.11b Wi-

Fi products. 2.4GHz ISM (Industrial, Science, and Medical) band operation Integrated easy-to-use Wireless Networking Utility USB 2.0 interface, for operation in virtually any desktop or notebook computer WPA, WPA2, 64-bit WEP (Wired Equivalent Privacy), or 128-bit encryption Wireless access to networked resources Support for both Infrastructure and Ad-Hoc (peer-to-peer) networking modes Data rate of up to 54Mbps (802.11g), or 11Mbps (802.11b) Easy installation and use External antenna LED power and network link indicators DX-BUSB Manaul_20071012 Page 6 of 37 Applications and Advantages Wireless roaming with a laptop around the home or office Offers the freedom of networkingwithout cables Connection rates of up to 54Mbps Provides immediate wireless connectivity at home, work, and hotspot locations without compromising the use of existing 802.11b and 802.11g products Compatibility with 802.11b products 802.11g wireless LAN solutions are backward-compatible with existing Wi-Fi

(IEEE 802.11b) products and with other products that display the 54g logo Difficult-to-wire environments Enables networking in buildings with solid or finished walls, or open areas where wiring is difficult to install Frequently changing environments Adapts easily in offices or environments that frequently rearrange or change locations Temporary LANs for special projects or peak time Sets up temporary networks such as at trade shows, exhibitions, and construction sites, which need networks on a short-term basis; also companies who need additional workstations for a peak activity period SOHO (Small Office/Home Office) networking needs Provides the easy and quick, small network installation SOHO users need Product Specifications Host Interface:

Power Consumption:

Operating Temperature: 32140 degrees F (060 degrees C) Storage Temperature:

Humidity:

Max. 90% (non-condensing) Typical Operating Range: 100200 ft. (3060m) indoors

[insert image from P74471-A, p.8]

USB 2.0 interface Tx/Rx peak 510/250mA @ 3.3VDC (max.)

-4176 degrees F (-2080 degrees C)

(a) Protective Cap The cap can be stored on the opposite end of the USB connector. Insert image from P74471-A, p.8 DX-BUSB Manaul_20071012 Page 7 of 37 The cap snaps over the USB connector for protection. Insert image from P74471-A, p.8

(b) Activity LED Lights up and flashes when the Adapter is active Blinking Green: Active Off: Not connected to network On: Connected to network

(c) USB Adapter Fits securely into your computers USB slot or into the Desktop Adapter Base

(included).

(d) Desktop Adapter Base Lets you extend the USB Adapter away from interfering objects around your computer. System Requirements

- PC-compatible desktop computer with one available USB slot and CD-ROM drive

- Windows 98SE, Me, 2000, or XP Package Contents

- Wireless G USB Network Adapter

- Desktop Adapter Base

- Quick Installation Guide

- Installation Software CD

- User Manual 3 Installing and Setting up the Adapter Step 1. Install Important Note: Install the software before connecting the Adapter. 1.1 Insert the Installation Software CD into your CD-ROM drive. DX-BUSB Manaul_20071012 Page 8 of 37 1.2 The Dynex Wireless Networking Utility setup screen will automatically appear

(may take 1520 seconds to appear).

[insert splash page of Dynex Wireless Networking Utility setup screen, image 7050v4000-1]

1.3 Click install from the menu. Note: If the Dynex Wireless Networking Utility setup screen does not appear within 20 seconds, access your CD-ROM, double-click on the My Computer icon, and then double-click on the CD-ROM drive into which you have placed the installation CD. Double-click on the folder named Files, then double-click on the icon named setup.exe. 1.4 Choose an installation location, and click Next to accept the default location or click Browse to select a different location before clicking Next.

(insert image DX-BUSBv4000-2) Step 2. Connect Plug the Adapter into an Available USB Slot on your Notebook Computer DX-BUSB Manaul_20071012 Page 9 of 37 2.1 During the install process, you will be prompted to insert your Adapter. Plug the Adapter into an available USB port on your computer and follow the on-

screen instructions.

[insert F5D7010 QIG 01.jpg]

(Insert image from P74472-A, p.4) Note: If your system did not prompt you to insert your Adapter after the installation is completed, please do so now. 2.2 Dynex Wireless Networking Utility installation is now complete. Click Finish to close the Wizard. Insert DX-BUSBv4000-5]

DX-BUSB Manaul_20071012 Page 10 of 37 Step 3. Configure Use the Dynex Wireless Networking Utility 3.1 After successfully installing the Adapter, double-click the Dynex Wireless Networking Utility icon located on the desktop screen.

[insert F5D7000 QIG 06.jpg]

3.2 The Wireless Networking Utility screen will appear. Select a network to connect to by selecting a network from the Available Networks list. Then, click Connect.

[insert F5D7000 QIG 09.jpg]

DX-BUSB Manaul_20071012 Page 11 of 37 Note: In order to see your available networks, you must be near a working wireless router or access point. 3.3 The Dynex Wireless Networking Utility icon can also be found on the system tray.

[insert F5D7000 QIG 10.jpg]

(Note at bottom of page) Note: Double-clicking on the Dynex Wireless Networking Utility icon on the system tray will bring up the Utility screen. Installation is now complete. Using the Dynex Wireless Networking Utility After successfully installing the Dynex Wireless Networking Utility (WNU), configurations for wireless connection and security are just a few easy clicks away. DX-BUSB Manaul_20071012 Page 12 of 37 Accessing the Dynex Wireless Networking Utility from the Windows System Tray To access the WNU, simply place your mouse pointer and right-click over the WNU icon on the Windows system tray on the lower right-hand corner of your computers desktop.

[insert F5D7000-10.jpg]

[insert F5D7000-11.jpg]

If the icon is not present, click on Start > Programs > Dynex > Wireless Networking Utility.

[insert F5D7000 22.jpg]

The WNUs default screen is the Current Status tab. The Current Status tab displays the current network status and available networks. DX-BUSB Manaul_20071012 Page 13 of 37 Network Status This window displays the connectivity status of the current network, between the computer and router, and between the router and the Internet. In the event of a problem, use the Network Status window to determine the source (e.g., computer, router, or Internet/modem). Available Networks This window displays the available networks at the current location as well as their SSID, Signal Strength, Security Type, Channel, and Network Type. Lost Wireless Connection If the current wireless connection is lost, a window will pop up and the WNU will attempt to reconnect. Connection Failure Other options will appear during attempts to reconnect. To stop connecting, click Stop and to reattempt connection, click Retry. DX-BUSB Manaul_20071012 Page 14 of 37 Network Status and Solution Tips To further understand the current Network Status, click Open Wireless Utility. The default screen will be the Current Status tab and the Network Status section determines which connections are good and/or faulty.

[insert F5D7000-12.jpg]

The WNU also features a Solution Tips section that provides troubleshooting guidelines. Setting Wireless Network Profiles The My Connections tab on the WNU allows you to add, edit, and delete connection profiles. It also displays signal strength, security, and network type.

[insert F5D7000-13.jpg]

DX-BUSB Manaul_20071012 Page 15 of 37 Securing your Wi-Fi Network If you choose to connect to a secure network, determine the type of security

(WPA or WEP*) and use the appropriate field in the dialog box.

*Note: Types of security Note: When you select a network using encryption, you will first see the simple security screen. Click the Advanced button to see other security options (below). DX-BUSB Manaul_20071012 Page 16 of 37

[insert F5D7000-14.jpg]

DX-BUSB Manaul_20071012 Page 17 of 37 Wired Equivalent Privacy (WEP) is a less secure, but more widely adopted wireless security protocol. Depending on the security level (64- or 128-bit), the user will be asked to input a 10- or 26-character hex key. A hex key is a combination of letters, af, and numbers, 09. Wireless Protected Access (WPA) is the new standard in the wireless security. However, not all wireless cards and adapters support this technology. Please check your wireless adapters user manual to check if it supports WPA. Instead of a hex key, WPA uses only passphrases, which are much easier to remember. The following section, intended for the home, home office, and small office user, presents a few different ways to maximize the security of your wireless network. At the time of publication, four encryption methods are available:

Encryption Methods:

Name Wi-Fi Protected Access-TKIP Wi-Fi Protected Access 2 64-Bit Wired Equivalent Privacy 128-Bit Wired Equivalent Privacy 128-bit WEP Acronym 64-bit WEP WPA2-AES (or just WPA2) Best Dynamic key encryption and mutual authentication AES (Advanced Encryption Standard) does not cause any throughput loss WPA-TKIP/AES

(or just WPA) Best Dynamic key encryption and mutual authentication TKIP (Temporal Key Integrity Protocol) added so that keys are rotated and encryption is strengthened Security Good Features Static keys Better Static keys Encryption keys based on RC4 algorithm

(typically 40-

bit keys) More secure than 64-bit WEP using a key length of 104 bits plus 24 additional bits of system-

generated data DX-BUSB Manaul_20071012 Page 18 of 37 Wired Equivalent Privacy (WEP) WEP is a common protocol that adds security to all Wi-Fi-compliant wireless products. WEP gives wireless networks the equivalent level of privacy protection as a comparable wired network. 64-Bit WEP 64-bit WEP was first introduced with 64-bit encryption, which includes a key length of 40 bits plus 24 additional bits of system-generated data (64 bits total). Some hardware manufacturers refer to 64-bit as 40-bit encryption. Shortly after the technology was introduced, researchers found that 64-bit encryption was too easy to decode. 128-Bit WEP As a result of 64-bit WEPs potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits total). Some hardware manufacturers refer to 128-bit as 104-bit encryption. Most of the new wireless equipment in the market today supports both 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Dynex wireless products will support both 64-bit and 128-bit WEP. Encryption Keys After selecting either the 64-bit or 128-bit WEP encryption mode, it is critical that you generate an encryption key. If the encryption key is not consistent throughout the entire wireless network, your wireless networking devices will be unable to communicate with one another. You can enter your key by typing in the hex key manually, or you can type a passphrase into the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 0 9. For 64-bit WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to enter 26 hex keys. For instance:

AF 0F 4B C3 D4 = 64-bit WEP key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key The WEP passphrase is NOT the same as a WEP key. Your Adapter uses this passphrase to generate your WEP keys, but different hardware manufacturers might have different methods on generating the keys. If you have multiple vendors equipment in your network, the easiest thing to do is to use the hex WEP key from your wireless router (or DX-BUSB Manaul_20071012 Page 19 of 37 access point) and enter it manually into the hex WEP key table in your Adapters configuration screen. Wi-Fi Protected Access (WPA) WPA is a new Wi-Fi standard that improves upon the security features of WEP. To use WPA security, the drivers and software of your wireless equipment must be upgraded to support it. These updates will be found on your wireless vendors website. There are three types of WPA security: WPA-PSK (no server), and WPA

(with radius server), and WPA2. WPA-PSK (no server) uses what is known as a pre-shared key as the network key. A network key is a password that is between eight and 63 characters long. It can be a combination of letters, numbers, or characters. Each client uses the same network key to access the network. Typically, this is the mode that will be used in a home environment. WPA (with radius server) is a system where a radius server distributes the network key to the clients automatically. This is typically found in a business environment. WPA2 requires Advanced Encryption Standard (AES) for encryption of data, which offers much greater security than WPA. WPA uses both Temporal Key Integrity Protocol (TKIP) and (AES) for encryption. For a list of Dynex wireless products that support WPA, please visit our website at www.Dynex.com/networking. Most Wi-Fi products ship with security turned off. So once you have your network working, you need to activate WEP or WPA and make sure all your wireless devices are sharing the same network key. IMPORTANT: You must now set all wireless network cards/adapters to match these settings. Configuring your Dynex Wireless G USB Network Adapter to use Security At this point, you should already have your wireless router (or access point) set to use WPA or WEP. In order for you to gain a wireless connection, you will need to set your Wireless G USB Network Adapter to use the same security settings. Changing the Wireless Security Settings DX-BUSB Manaul_20071012 Page 20 of 37 The Dynex Wireless G USB Network Adapter supports the latest WPA security feature as well as the legacy WEP security standard. By default, wireless security is disabled. To enable security, you will first need to determine which standard is used by the router or access point. (See your wireless routers or access points manual for directions on how to access the security settings.)

[insert F5D7000-18.jpg]

To access the security settings on your Adapter, click the My Connections tab and point to the connection for which you want to change security settings. Click Edit to change settings. WEP Setup 64-Bit WEP Encryption 1. Select WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 09. For 64-bit WEP, you need to enter 10 hex keys. DX-BUSB Manaul_20071012 Page 21 of 37 For instance:

AF 0F 4B C3 D4 = 64-bit WEP key

[insert F5D7000-15.jpg]

3. Click Save to finish. Encryption in the wireless router

(or access point) is now set. Each of your computers on your wireless network will now need to be configured with the same DX-BUSB Manaul_20071012 Page 22 of 37 security settings. WARNING: If you are using a wireless client to turn on the security settings in your wireless router (or access point), you will temporarily lose your wireless connection until you activate security on your wireless client. Please record the key prior to applying changes in the wireless router (or access point). If you dont remember the hex key, your client will be locked out of the wireless router (or access point). 128-Bit WEP Encryption 1. Select WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key manually by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 hex keys. For instance:

C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key

[insert F5D7000-16.jpg]

DX-BUSB Manaul_20071012 Page 23 of 37 3. Click Save to finish. Encryption in the wireless router

(or access point) is now set. Each of the computers on your wireless network will now need to be configured with the same security settings. DX-BUSB Manaul_20071012 Page 24 of 37 WARNING: If you are using a wireless client to turn on the security settings in your wireless router (or access point), you will temporarily lose your wireless connection until you activate security on your wireless client. Please record the key prior to applying changes in the wireless router (or access point). If you dont remember the hex key, your client will be locked out of the wireless router (or access point). WPA-PSK (no server) Choose this setting if your network does not use a radius server. WPA-PSK (no server) is typically used in home and small office networking. 1. From the Network Authentication drop-down menu, select WPA-PSK (no server). 2. Enter your network key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients

(network cards) that you want to include in your network.

[insert F5D7000-17.jpg]

DX-BUSB Manaul_20071012 Page 25 of 37 3. Click Save to finish. You must now set all clients (network cards) to match these settings. Wireless Networking Utility Options DX-BUSB Manaul_20071012 Page 26 of 37

[insert F5D7000-19.jpg]

The Options tab on the WNU provides the user the ability to customize his or her WNU settings. Wireless Networking Utility Help The WNU Help tab provides users with access to online and telephone support, as well as advanced diagnostic tools.

[insert F5D7000-20.jpg]

DX-BUSB Manaul_20071012 Page 27 of 37 Advanced Diagnostic Tools The Advanced Diagnostic Tools section is the central control panel for all the settings of the hardware and software components of the wireless network. It provides an array of tests and connectivity services to ensure optimal network performance.

[insert F5D7000-21.jpg]

DX-BUSB Manaul_20071012 Page 28 of 37 Troubleshooting I cant connect to the Internet wirelessly. If you are unable to connect to the Internet from a wireless computer, please check the following items:

1. Look at the lights on your wireless router. If youre using a Dynex Wireless Router, the lights should be as follows:

DX-BUSB Manaul_20071012 Page 29 of 37 The Power light should be on. The Connected light should be on, and not blinking. The WAN light should be either on or blinking. If your Dynex Wireless Routers lights match these descriptions, go to number 2, below. If this is NOT the case, please contact Dynex technical support. If you are not using a Dynex Wireless Router, consult that router manufacturers user guide. 2. Open your Wireless Networking Utility software by clicking on the icon in the system tray at the bottom right-hand corner of the screen; the tray icon should look like this (the icon may be red or green):

3. The window that opens will show a list of Available Networks. Available networks are wireless networks you can connect to. If you are using a Dynex 802.11g (54g) Router, Dynex54g is the default name. If you are using a Dynex 802.11b Router, the default name should be WLAN. If you are NOT using a Dynex Router, please consult your router manufacturers user manual for the default name. The name of your wireless network appears in Available Networks. If the correct network name is listed in the Available Networks list, please follow the steps below to connect wirelessly:

1. Click on the correct network name in the Available Networks list. 2. If the network has security (encryption) enabled, you will need to enter the network key. For more information regarding security, please see Securing your Wi-Fi Network on page xx of this manual. 3. Within a few seconds, the tray icon in the lower right-hand corner of your screen should turn green, indicating a successful connection to the network. If you are still unable to access the Internet after connecting to the wireless network, please contact Dynex Technical Support. The name of your wireless network DOES NOT appear in the list of Available Networks. If the correct network name is not listed under Available Networks in the Wireless Networking Utility, please attempt the following troubleshooting steps:

DX-BUSB Manaul_20071012 Page 30 of 37 1. Temporarily move computer, if possible, to five to 10 feet away from the Wireless Router (or Access Point). Close the Wireless Networking Utility, and reopen it. If the correct network name now appears under Available Networks, you may have a range or interference problem. Please see the suggestions listed in the Placement of your Wireless Networking Hardware for Optimal Performance section on page 2. 2. Using a computer that is connected to the Wireless Router (or Access Point) via a network cable (as opposed to wirelessly), ensure that Broadcast SSID is enabled. This setting is found on the Routers wireless Channel and SSID configuration page. For detailed instructions on accessing this page and changing settings, please see your Wireless Routers (or Access Points) User Manual. If you are still unable to access the Internet after completing these steps, please contact Dynex Technical Support. Installation CD-ROM does not start Wireless Networking Utility. If the CD-ROM does not start the Wireless Networking Utility automatically, it could be that the computer is running other applications that are interfering with the CD drive. If the Wireless Networking Utility screen does not appear within 15-20 seconds, open up your CD-ROM drive by double-clicking on the My Computer icon. Next, double-click on the CD-ROM drive that the Installation CD has been placed in to start the installation. Then, double-click on the folder named Files. Next, double-click on the icon named Setup.exe. Power LED does not come ON; Adapter is not working. If the LED indicators are not ON, the problem may be that the Adapter is not connected or installed properly. Verify that the Adapter is plugged firmly into the USB slot of your computer. Check to see that the drivers for the Adapter have been installed. Right-click on the My Computer icon on your desktop. Choose Properties and navigate to the Device Manager and see if your Adapter is listed without any errors. If an error is indicated, contact Dynex Technical Support. Link LED is blinking slowly; cannot connect to a wireless network or the Internet. If your Adapter appears to be functioning properly, but you cannot connect to a network or you have a red wireless icon at the bottom of your screen, the problem may be that there is a mismatch between the network name (SSID) settings in your wireless network properties. DX-BUSB Manaul_20071012 Page 31 of 37 Check the SSID settings to see if they match. The SSID is case-sensitive and the spelling on each computer must be exactly the same in order for the Adapter to connect to the wireless router (or access point). Note: To check the SSID settings or look for an available network, double-click the Signal Indicator icon to bring up the Wireless Networks screen. Click Add if you do not see the network you are trying to connect to and type in the SSID. For more information about setting up an SSID, please refer to your router manufacturers user manual. If issues persist even at close range, please contact Dynex Technical Support. Link LED is solid but I cannot connect to the Internet. If you have a signal but cant get online or obtain an IP address, the problem may be that there is a mismatch between the encryption key settings in your computer and wireless router (or access point). Check the WEP key settings to see if they match. The key is case-sensitive and the spelling on each computer and wireless router (or access point) must be exactly the same in order for the Adapter to connect to the router. For more information about encryption, please see the Securing your Wi-Fi Network section in this manual. If issues persist even at close range, please contact Dynex Technical Support. Data transfer is sometimes slow. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. As a result, the typical indoor range of your wireless devices will be between 100 to 200 feet. Note also that connection speed may decrease as you move farther from the wireless router (or access point). In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, to five to 10 feet away from the wireless router (or access point). Please see the section titled Placement of your Wireless Networking Hardware for Optimal Performance in this manual. If issues persist even at close range, please contact Dynex Technical Support. Signal strength is poor. DX-BUSB Manaul_20071012 Page 32 of 37 Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. As a result, the typical indoor range of your wireless devices will be between 100 to 200 feet. Note also that connection speed may decrease as you move farther from the wireless router (or access point). Please see the section titled Placement of your Wireless Networking Hardware for Optimal Performance in this manual. If issues persist even at close range, please contact Dynex Technical Support. Why are there two wireless utilities in my system tray? Which one should I use?

There are several features and advantages to using the Dynex Wireless Networking Utility over the Windows XP Wireless Zero Configuration utility. We offer a site survey, detailed link information, and adapter diagnosis, to name a few. Its essential to know which utility is managing your adapter. We recommend using the Dynex Wireless Networking Utility. To use the Dynex Wireless Networking Utility, follow the steps below:

Step 1 Right-click on the network status icon in the system tray and select View Available Wireless Networks. Step 2 Click on the Advanced button in the lower left-hand corner of the Available Wireless Networks window. Step 3 From the Advanced tab, uncheck Use Windows to configure my wireless network. Once the box is unchecked, click OK to close the window. You are now using the Dynex Wireless Networking Utility to configure the Adapter. Whats the difference between 802.11b, 802.11g, 802.11a, and Pre-N?

Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation for certifying network standards. The most common wireless networking standard, 802.11b, transmits information at 11Mbps; 802.11a and 802.11g work at 54Mbps;

and Pre-N works at 108Mbps. Pre-N, the precursor to the upcoming 802.11n DX-BUSB Manaul_20071012 Page 33 of 37 release, promises speeds that exceed 802.11g, and up to twice the wireless coverage area. See the following chart for more detailed information. Wireless Comparison Chart Wireless Technology Speed 802.11b 802.11a 802.11g 11Mbps 54Mbps 54Mbps Dynex Pre-N 600% faster than standard 802.11g*

Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g or 802.11b Up to 800% wider coverage than standard 802.11g*

Leading edge best coverage and throughput Frequency Compatibility Coverage*

Advantage Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g Depends on interference typically 100200 ft. indoors Maturelegacy technology Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11b Depends on interference typically 100200 ft. indoors Common widespread use for Internet sharing 5GHz uncrowded band Incompatible with 802.11b or 802.11g Interference range is typically 50100 ft. Less interference great for multimedia application

*Distance and connection speeds will vary depending on your networking environment. Technical Support DX-BUSB Manaul_20071012 Page 34 of 37 You can find technical support information at www.Dynex.com or www.Dynex.com/networking. If you want to contact technical support by phone, please call:

(800) 305-2204 Information Wi-Fi Interoperability Certificate FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Best Buy,,of 7601 Penn Avenue South Richfield, MN USA 55423-3645, declare under our sole responsibility that the product, DX-BUSB, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in laptops (notebooks) with side slot configuration. The average SAR value of CCK is 0.825W/kg; the average SAR value of OFDM is 0.704W/kg. Operation of this product marketed in the USA is firmware-limited to 2.4GHz channel 1 to 11. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which DX-BUSB Manaul_20071012 Page 35 of 37 can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Statement Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Best Buy may void the users authority to operate the equipment. Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Dynex Corporation Limited Lifetime Product Warranty What this warranty covers. Dynex Corporation warrants to the original purchaser of this Dynex product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Dynex Corporation warrants the Dynex product for the lifetime of the product. What will we do to correct problems?

Product Warranty. Dynex will repair or replace, at its option, any defective product free of charge

(except for shipping charges for the product). What is not covered by this warranty?

All above warranties are null and void if the Dynex product is not provided to Dynex Corporation for inspection upon Dynexs request at the sole expense of the purchaser, or if Dynex Corporation determines that the Dynex product has DX-BUSB Manaul_20071012 Page 36 of 37 been improperly installed, altered in any way, or tampered with. The Dynex Product Warranty does not protect against acts of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service. To get service for your Dynex product you must take the following steps:

1. Contact Dynex Corporation at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:

a. The part number of the Dynex product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. 2. Your Dynex Customer Service Representative will then instruct you on how to forward your receipt and Dynex product and how to proceed with your claim. Dynex Corporation reserves the right to review the damaged Dynex product. All costs of shipping the Dynex product to Dynex Corporation for inspection shall be borne solely by the purchaser. If Dynex determines, in its sole discretion, that it is impractical to ship the damaged equipment to Dynex Corporation, Dynex may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Dynex Corporation reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF DYNEX CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. DX-BUSB Manaul_20071012 Page 37 of 37 IN NO EVENT SHALL DYNEX CORPORATION BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY DYNEX PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. DYNEX Wireless G USB Network Adapter Dynex Tech Support

(800) 305-2204 2005 Dynex Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. 54g is a trademark of Broadcom Corporation in the United States and/or other countries. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance. P74471-E

DX-EBUSB Manaul_20071012 Page 1 of 30 Dynex Enhanced Wireless G USB Network Adapter Connect your desktop or notebook computer to a wireless network User Manual Table of Contents 1 Introduction . x Benefits of a Home Network . x Advantages of a Wireless Network . x Placement of your Wireless Networking Hardware for Optimal Performance . x 2 Overview. x Product Features . x Applications and Advantages . x Product Specifications . x System Requirements . x Package Contents.x 3 Knowing your Wireless Enhanced G USB Network Adapter..x 4 Installing and Setting up the USB Network Adapter . x Step 1: Install the Software . xx Step 2: Connect the USB Adapter to your PC . xx Step 3: Let Windows Finish the Installation 5 Uninstalling the Software and Driversxx 6 Using the Dynex Wireless LAN Monitor Utility. xx 7 Securing your Wi-Fi Network . xx 8 Troubleshooting. xx 9 Information . xx DX-EBUSB Manaul_20071012 Page 2 of 30 Introduction (header for section 1) Thank you for purchasing the Dynex Enhanced Wireless G USB Network Adapter (the Adapter). Now you can take advantage of this great new technology and gain the freedom to network your home and office computers wirelessly. This Adapter allows you to connect a desktop or notebook computer to your network. The easy installation and setup will have you networking wirelessly in minutes. Please be sure to read through this User Manual completely, and pay special attention to the section entitled Placement of your Wireless Networking Hardware for Optimal Performance on page 2. Benefits of a Home Network Your Dynex Home Network will allow you to:

Share one high-speed Internet connection with all the computers in your home Share resources, such as files, and hard drives among all the connected computers in your home Share a single printer with the entire family Share documents, music, video, and digital pictures Store, retrieve, and copy files from one computer to another Simultaneously play games online, check Internet email, and chat Advantages of a Wireless Network Here are some of the advantages of setting up a Dynex wireless network:

Mobility youll no longer need a dedicated computer room now you can work on a networked laptop or desktop computer anywhere within your wireless range Easy installation Dynex Easy Installation Wizards make setup simple Flexibility set up and access printers, computers, and other networking devices from anywhere in your home Easy expansion the wide range of Dynex networking products let you expand your network to include devices such as printers and gaming consoles No cabling required you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office Widespread industry acceptance choose from a wide range of interoperable networking products Placement of your Wireless Networking Hardware for Optimal Performance DX-EBUSB Manaul_20071012 Page 3 of 30 Your wireless connection will be stronger the closer your computer is to your wireless router (or access point). Typical indoor operating range for your wireless devices is between 300 and 400 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your wireless router (or access point) and connected devices increases. This may or may not be noticeable to you. As you move farther from your wireless router (or access point), connection speed may decrease. Factors that can weaken signals simply by getting in the way of your networks radio waves are metal appliances or obstructions, and walls. If you have concerns about your networks performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet away from the wireless router (or access point) in order to see if distance is the problem. If difficulties persist even at close range, please contact Dynex Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help. 1. Placement of your Wireless Router (or Access Point) Place your wireless router (or access point), the central connection point of your network, as close as possible to the center of your wireless network devices. To achieve the best wireless network coverage for your wireless clients, (i.e. computers enabled by Dynex Wireless Notebook Cards, Wireless Desktop Cards, and Wireless USB Adapters):

Ensure that your wireless routers (or access points) antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your wireless router (or access point) itself is positioned vertically, point the antennas as much as possible in an upward direction. In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor. Try not to place the wireless router (or access point) near a cordless 2.4GHz phone 2. Avoid Obstacles and Interference Avoid placing your wireless router (or access point) near devices that may emit radio noise, such as microwave ovens. Other objects that can inhibit wireless communication can include:

DX-EBUSB Manaul_20071012 Page 4 of 30 Refrigerators Washers and/or dryers Metal cabinets Large aquariums Metallic-based, UV-tinted windows If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signals path between your computers and wireless router (or access point). 3. Cordless Phone Placement If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

Try moving cordless phones away from the wireless router (or access point) and your wireless-enabled computers. Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturers information). If this fixes the problem, your phone may be interfering. If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network as possible. For example, change the phone to channel 1 and move your wireless router (or access point) to channel 11. (Your channel selection will vary depending on your region.) See your phones user manual for detailed instructions. If necessary, consider switching to a 900MHz or 5GHz cordless phone. 4. Choose the Quietest Channel for your Wireless Network In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours. Use the Site Survey capabilities of your Wireless Setup Utility to locate any other wireless networks, and move your wireless router (or access point) and computers to a channel as far away from other networks as possible. Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For more Dynex wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. DX-EBUSB Manaul_20071012 Page 5 of 30 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important. Secure connections include:

Virtual Private Network (VPN) connections, often used to connect remotely to an office network The Bring Your Own Access program from America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service Most online banking websites Many commercial websites that require a user name and password to access your account Secure connections can be interrupted by a computers power management setting, which causes it to go to sleep. The simplest solution to avoid this is to simply reconnect by re-running the VPN or AOL software, or by re-logging into the secure website. A second alternative is to change your computers power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting in Windows, see the Power Options item in the Control Panel. If you continue to have difficulty with Secure Connections, VPNs, and AOL, please review steps 14 above to be sure you have addressed these issues. For more information regarding our networking products, visit our website at www.Dynexsupport.com.or call Dynex Technical Support. Overview (header for section 2) Product Features The Wireless Enhanced G USB Network Adapter complies with the IEEE 802.11g standard in order to communicate with other 802.11g-compliant wireless devices at 54Mbps or the faster Enhanced G. 2.4GHz ISM (Industrial, Science, and Medical) band operation Integrated, easy-to-use profile manager for storing multiple wireless network settings for work, school, home, or any other setup USB 2.0 interface, for Plug-and-Play installation and convenience in virtually any desktop or notebook computer WPA security (Windows XP only), 64-bit WEP or 128-bit encryption Wireless access to networked resources Support for both infrastructure and ad-hoc (peer-to-peer) networking modes Packet transfer rate of up to 54Mbps DX-EBUSB Manaul_20071012 Page 6 of 30 Easy installation and use LED link/activity indicator Desktop stand allows you to position your Adapter for optimal wireless performance Applications and Advantages Wireless roaming with a laptop around the home or office Offers the freedom of networkingwithout cables Connection rates of up to 54Mbps Provides immediate wireless connectivity at home, work, and hotspot locations without compromising the use of existing 802.11b and 802.11g products Compatibility with 802.11b products 802.11g wireless LAN solutions are backward-compatible with existing Wi-Fi

(IEEE 802.11b) products and with other products that display the 54g logo Difficult-to-wire environments Enables networking in buildings with solid or finished walls, or open areas where wiring is difficult to install Frequently changing environments Adapts easily in offices or environments that frequently rearrange or change locations Temporary LANs for special projects or peak time Sets up temporary networks such as at trade shows, exhibitions, and construction sites, which need networks on a short-term basis; also companies who need additional workstations for a peak activity period SOHO (Small Office/Home Office) networking needs Provides the easy and quick, small network installation SOHO users need Product Specifications Host Interface:

This product is compatible with the USB 1.1 and USB 2.0 specification. To achieve maximum networking speeds (54Mbps), this device must be connected to a USB 2.0 host port on a PC. Connection of this device to a USB 1.1 host port will yield a maximum of 11Mbps networking speed. Power Consumption:

500mA (max) USB 2.0 DX-EBUSB Manaul_20071012 Page 7 of 30 FCC Class B, CE Mark, C-Tick Certification:

Operating Temperature: 32131 F (055 C) Storage Temperature:

Typical Operating Range: Up to 200 ft.*

*Distance and connection speeds will vary depending on your networking environment

-13158 F (-2570 C) System Requirements PC with one available USB port Windows 2000, XP, or Vista Package Contents Dynex Wireless Enhanced G USB Network Adapter with Desktop Stand (and attached USB cable) Quick Installation Guide Installation Software CD User Manual Knowing your Wireless Enhanced G USB Network Adapter (header of section 3)

(Designer please use image found on P74845uk page 8) Protective Cap Activity LED Indicates wireless activity when blinking Blinking Green: Scanning Off: No Activity On: Connected to Network USB Adapter Desktop Stand

(Optional Use) The cap snaps over the USB connector for protection. It can be stored on the opposite end of the USB connector. Installing and Setting up the USB Network Adapter (header for section 4) Step 1: Install the Software WARNING: Install the Software before Inserting the Adapter 1.1 Insert the CD into your CD-ROM drive. 1.2 The Dynex Wireless Setup Utility screen will automatically appear. If it does not appear within 1520 seconds, then select your CD-ROM drive and double-

click on the folder named Files. Next double-click on the icon named Start.exe. DX-EBUSB Manaul_20071012 Page 8 of 30 1.3 In the menu window, click install to start the software installation program. 1.4 The installer will start. Click Next to continue.

(Designer please use image found on P74845uk page 9) 1.5 When the installer is done installing the software, you will see the following screen. Click Finish.

(Designer please use image found on P74845uk page 10) Step 2: Connect the USB Adapter to your PC 2.1 After the software installation is finished, the message You can plug in your WLAN adapter now will appear. Plug the Adapter into an available USB port on your desktop or notebook computer.

(Designer please use images found on P74845uk page 10) For desktops:

Product Placement The best location for your Adapter is on top of your computers monitor. Placing the Adapter on your desktop is acceptable; however, avoid placing the Adapter near metal objects such as a computer case or speakers. Any object that is metal has the ability to block the radio signals from the Adapter. Step 3: Let Windows Finish the Installation 3.1 After you connect your Adapter, Windows will detect that new hardware has been installed. Depending on your version of Windows, a window similar to the For notebooks:

DX-EBUSB Manaul_20071012 Page 9 of 30 one pictured here will appear. Select the option Install the software automatically

(Recommended) and click Next.

(Designer please use image found on P74845uk page 11) 3.2 If you are using Windows 98SE or Me, you will be asked to restart your computer. Select Restart. Click Finish.

(Designer please use image found on P74471 page 11) 3.3 When the installation is complete, the Dynex Wireless LAN Monitor Utility icon will appear on your taskbar. To open the Utility, double-click on this icon.

(Designer please use image found on P74471-C page 11) 3.4 A small icon in your system tray (bottom right corner of most screens) will appear. This is your shortcut to the Dynex Wireless LAN Monitor Utility. It also indicates the status of your connection:

Red: No connection to a wireless network

(Designer please use image found on P74845uk page 12) Blue: Connected to a wireless network

(Designer please use image found on P74845uk page 12) If you already have a wireless router (or an access point) in your home or office, the Adapter will automatically attempt to connect to your wireless network. In most cases, the Adapter will be able to connect to your network automatically. If you are using encryption, you will have to set the encryption settings of your Adapter to match that of your wireless router (or access point), before the Adapter can successfully connect to your wireless network. For information about configuring your Adapter, see the section in this User Manual called Profile Tab:

Creating a Profile on page XX. Uninstalling the Software and Drivers (header for section 5) If you need to remove the software and drivers for any reason, you can easily accomplish this in one of two ways. You can insert the software CD and click on the Uninstall option in the menu, or you can go to the Windows Control Panel and select the Add/Remove Programs option. The Dynex Wizard will walk you through the removal process. DX-EBUSB Manaul_20071012 Page 10 of 30 Using the Dynex Wireless LAN Monitor Utility (header for section 6) To launch the Wireless LAN Monitor Utility, double-click the icon in the system tray (right side of taskbar). The window below appears.

(Designer please use image found on P74845uk page 14) Double-clicking on the icon in the system tray will open the Wireless Monitor window. Status Tab When you see the Utility icon on your taskbar, you can control your USB Adapter through it. Double-click on the icon to open the Utility. The first tabStatusis visible. From this tab you can see your current connection status on the screen. In the illustration below, the display of numerals 1 and 0 between the computer and the wireless router (or access point) indicates an active connection. This diagram also shows that there is a connection to the Internet by displaying the numerals 1 and 0 between the wireless router (or access point) and the Internet.

(Designer please use image found on P74845uk page 14) The display of numerals 1 and 0 here indicates a connection. If there is no connection between the computer and wireless router (or access point), and/or the Internet, an X will be displayed.

(a) Current Profile String This indicates the name of the profile you are currently using, if any. If a question mark appears next to the text in this box, there is no profile set up for the network to which you are currently connected. If this is the case, the name of that network will be displayed in this box.

(b) More Button Press the More button to see detailsincluding the name, signal strength, signal-link quality, IP informationfor the network to which you are connected

(see image below).

(Designer please use image found on P74845uk page 15) DX-EBUSB Manaul_20071012 Page 11 of 30 Access Point (AP) List Tab To view a list of all available networks in your area, select the AP List tab. In this window, you will be presented with a list of the available networks.

(Designer please use image found on P74845uk page 16)

(a) Network Name This column shows you the name of the wireless network that is available. On the left side of the network name are small icons that advise you of specific details about the network. A blue circle around the network icon (e) indicates that you are currently connected to this network. A small padlock icon (f) next to a network name indicates that this network is secured (either by WEP or WPA encryption). It is not possible to connect to a secured network without the proper network key.

(b) Band This column indicates on which band the network is operating. G indicates that it is an 802.11g-based network. B indicates it is an 802.11b-based network.

(c) Signal This column indicates the signal strength of the wireless network. Typically, the stronger the signal strength, the closer the network is to your physical location. The lower the signal strength, the farther away from the network you are.

(d) Site Information When you highlight a network name in the AP list by clicking on it once, the detailed information about that network will be available here. You will see what type of network it is (Access Point or Peer-to-Peer), what channel the network is operating on, the status of encryption (security) (On or Off), and (below Surveyed at:) the MAC address of that wireless network. How to connect to a wireless network in the Access Point (AP) list:

There are two ways to connect to a network that appear in the AP list. 1. Highlight the network name by clicking on it once, then click the Connect button on the bottom of the window. or 2. Double-click a network name that is in the AP list. This will connect you to the network automatically. Note: If the network to which you are attempting to connect is using encryption, you will be prompted to create a profile with the encryption settings. How to Update the Access Point (AP) List Information Pressing the Refresh (g) button will make the USB Adapter scan the air for available wireless networks. The list will be updated. DX-EBUSB Manaul_20071012 Page 12 of 30 Profile Tab: Creating a Profile Using profiles allows you to save configurations for different wireless networks. For instance, if you use your Adapter at your place of work and also at your home, your wireless network settings may be different for each location. Profiles let you store settings for each location and name them for easy identification. You can quickly change from one profile to another profile without having to remember the particular settings of a certain network.

(Designer please use image found on P74845uk page 17) Creating a New Profile 1. Click Add to open the new profile screen. Type in a name for the profile. The name can be anything you want. You should pick something easy to remember like Work, for your work network or Home, for your home network. Click Next to continue.

(Designer please use image found on P74845uk page 18) 2. The next screen you will see allows you to type in the name of the network you will be connecting to and the type of network it is. It gives you the option of setting the data rate for that network.

(Designer please use image found on P74845uk page 18)

(a) In the Network Name box, type in the exact name of the network you will be connecting to. The Network Name is the same as the network SSID.

(b) In the Network Type box, select the type of network to which you will be connecting. Select Access Point if it is a network with a wireless router or access point (this is most common). Select Peer-to-Peer if this is a direct connection to another computer.

(c) We suggest that you leave the Transfer Rate box set on Automatic unless there is a specific need to change this setting.

(Designer please use image found on P74845uk page 19) Click Next to continue. 3. The next screen allows you to input security encryption settings for the network. If the network is not encrypted, then leave the mode set to Off and click Complete. If the network is encrypted, you will need to have the network key and key type

(open or shared). This information is the same as it is for your wireless router or DX-EBUSB Manaul_20071012 Page 13 of 30 access point. In a larger-office setting, this information is typically available from the network administrator. TIP: Most networks with WEP use the Open System key type. For more detailed information, go to the section titled Securing your Wireless Network on page xx in this User Manual.

(a) Select the Authentication Mode from the drop-down menu.

(Designer please use image found on P74845uk page 19)

(b) After selecting the Authentication Mode, select the encryption type your network uses from the Encryption drop-down menu. Please see the section of this User Manual titled Securing your Wireless Network on page xx for information on which type of WEP encryption to use. Click Next.

(Designer please use image found on P74845uk page 20)

(c) The next screen allows you to select the key input method: either ASCII, Hexadecimal, or Passphrase. The method you choose will be determined by, and should be the same as, the method used by your wireless router or access point. TIP: Most keys are Hexadecimal (consists of letters and numbers from 09 and AF). (Designer please use image found on P74845uk page 20)

(d) Enter the key in the Key box and select the key to use in the Key Index drop-down menu. Your network administrator should provide this information. TIP: Most keys use Key Index 1.

(Designer please use image found on P4845uk page 21)

(e) Click Complete to save the profile. To begin using your new profile, highlight the profile name by clicking on the name one time, then click Connect.

(Designer please use image found on P74845uk page 21) How to Find and Connect to a Wireless Network 1. Open the Wireless Monitor window by double-clicking the icon in your system tray. 2. Click on the AP List tab (a). This will display a list of all of the networks in your area.

(Designer please use image found on P74845uk page 22) DX-EBUSB Manaul_20071012 Page 14 of 30 3. Double-click on the network to which you want to connect. A blue circle (b)

(Designer please use image found on P74845uk page 22) should appear around the network icon next to the name of the network you selected. This means you are connected to the network. If the network is using encryption security, you will be prompted to make a profile for that network in order to connect. See the section of this User Manual called Profile Tab: Creating a Profile on page xx [fill in correct page no.] for information. Windows XP Users If you are using Windows XP, please read this section. (Designer please bold text) Windows XP integrates a wireless management utility referred to as Windows XP Wireless Zero Configuration service (WZC). The WZC can be used to control your Adapter or you can use the Dynex Wireless LAN Monitor Utility. We suggest that you use the Dynex Utility to control your Adapter. If you choose to use the WZC, directions for operation of the WZC are available in the Windows XP help file. When you first install the Adapter, the Dynex Utility will be enabled. If you want to disable the Dynex Utility in order to use the WZC, follow the steps below to disable the Dynex Utility. Disabling the Windows Zero Configuration (WZC) in Windows XP 1. Right-click on the system tray icon.

(Designer please use image found on P74845uk page23) 2. In the menu, select Enable Windows Zero Configuration (WZC).

(Designer please use image found on P74471-C page 23) 3. To enable the Dynex Utility, right-click on the system tray icon. 4. In the menu, select Disable Windows Zero Configuration (WZC)

(Designer please use image found on P74471-C page 23) Setting up Windows XP Wireless Network Utility to use WPA-PSK In order to use WPA-PSK, ensure that you are using Windows Wireless Network Utility by doing the following:

1. Right-click on Wireless Network Connection and select Properties. 2. Clicking on the Wireless Networks tab will display the following screen. Ensure the Use Windows to configure my wireless network settings box is checked. DX-EBUSB Manaul_20071012 Page 15 of 30 3. Clicking the Configure button will allow you to choose your Network Authentication type.

(Designer please use image found on P74845uk page 24) 4. For home or small business users, select WPA-PSK under Network Authentication.

(Designer please use image found on P74845uk page 25) Note: Select WPA if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 5. Select TKIP or AES under Data Encryption. This setting must be identical to the wireless router that you set up. 6. Type your encryption key into the Network key box. Important: Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. 7. Click OK to apply settings. Setting up Windows XP WZC Utility to use WPA Note: If you have not done so already, you must download the WPA update from Microsoft Windows Update to enable WPA support. This can be found at the Microsoft website by searching for the term WPA Wireless. Locate the update called KB826942, download it, and update your operating system. Securing your Wi-Fi Network (header for section 7) Here are a few different ways to maximize the security of your wireless network and protect your data from unwanted intrusions. This section is intended for the home, home office, and small office user. At the time of publication, four encryption methods are available. Encryption Methods:

Name 64-Bit Wired Equivalent Privacy 128-Bit Encryption Wi-Fi Protected Access Wi-Fi Protected Access DX-EBUSB Manaul_20071012 Page 16 of 30 Acronym Security Features 64-bit WEP Good Static keys 128-bit Better Static keys Encryption keys based on RC4 algorithm

(typically 40-bit keys) Added security over 64-bit WEP using a key length of 104 bits, plus 24 additional bits of system-

generated data WPA-TKIP Best Dynamic key encryption and mutual authentication TKIP

(Temporal Key Integrity Protocol) added so that keys are rotated and encryption is strengthened WPA-AES Best Dynamic key encryption and mutual authentication AES

(Advanced Encryption Standard) does not cause any throughput loss Securing your Wireless Network Most wireless products ship with security turned off. This means that once you have your network working, you may need to activate WEP or WPA and make sure all your wireless devices are sharing the same network key. The following diagram shows the effect of not having the correct network key throughout your network.

(Designer please use chart found on P74845uk page 27)

[image computer]

Network Key=

MyPassword

[image router]

Network Key=

MyPassword

[image computer]

Network Key=

MyPassword

[image computer]

Network Key=

WRONG Password The Adapter cannot access the network because it uses a different network key than the one configured on the wireless router. DX-EBUSB Manaul_20071012 Page 17 of 30 Setting up your Dynex Wireless Router (or Access Point) to use Security To start using security, you need to first enable WEP or WPA for your wireless router (or access point). For Dynex Wireless Routers and Access Points, these security features can be configured by using the web-based interface. (See your wireless routers (or access points) manual for directions on how to access the management interface.) WEP Setup 64-Bit WEP Encryption 1. Select 64-bit WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 09. For 64-bit WEP, you need to enter 10 hex keys. For instance:

AF 0F 4B C3 D4 = 64-bit WEP key

(Designer please use chart found on P74845uk page 28) 3. Click Apply Changes to finish. Encryption in the Wireless Router (or Access Point) is now set. Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are using a wireless client to turn on the security settings in your Wireless Router (or Access Point), you will temporarily lose your wireless connection until you activate security on your wireless client. 128-Bit WEP Encryption 1. Select 128-bit WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key manually by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 hex keys. For instance:

C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key DX-EBUSB Manaul_20071012 Page 18 of 30 3. Click Apply Changes to finish. Encryption in the Wireless Router (or Access Point) is now set. Each of the computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are using a wireless client to turn on the security settings in your Wireless Router (or Access Point), you will temporarily lose your wireless connection until you activate security on your wireless client. WPA-PSK (no server) Choose this setting if your network does not use a radius server. WPA-PSK (no server) is typically used in home and small office networking. 1. From the Security Mode drop-down menu, select WPA-PSK (no server). 2. Enter your network key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients

(network cards) that you want to include in your network. 3. Click Apply Changes to finish. You must now set all clients (network cards and adapters) to match these settings. WPA (with server) Settings Choose this setting if your network uses a radius server to distribute keys to the clients (network cards and adapters). This is typically used in business networks. 1. From the Security Mode drop-down menu, select WPA (with server). 2. Enter the IP address of the radius server into the Radius Server fields. 3. Enter the radius key into the Radius Key field. 4. Enter the key interval. The key interval is how often the keys are distributed (in packets). 5. Click Apply Changes to finish. Connecting your Computer to a Wireless Router (or Access Point) that Requires a 64-Bit or 128-Bit WEP Key 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your Adapter. 2. Under the Wireless Network tab, select a network name from the AP list and click Configure. 3. Under Data Encryption select WEP. 4. Ensure that the check box Network key is provided for me automatically at the bottom is unchecked. If you are using this computer to connect to a corporate DX-EBUSB Manaul_20071012 Page 19 of 30 network, please consult your network administrator if this box needs to be checked. 5. Type your WEP key in the Network key and Confirm key boxes. Important: A WEP key is a combination of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 keys. For 64-bit WEP, you need to enter 10 keys. This network key needs to match the key you assign to your wireless router (or access point). 6. Click OK, and then Apply to save the settings. Connecting your Computer to a Wireless Router (or Access Point) that uses WPA-PSK (no server) 1. Double-click the Signal Indicator icon to bring up the Wireless Network Properties screen. The Advanced button will allow you to view and configure more options of your Adapter. 2. Under the Wireless Networks tab, select a network name from the AP list and click Configure. 3. Under Network Authentication select WPA-PSK. 4. Type your WPA key in the Network key box. Important: WPA-PSK is a combination of numbers and letters from AZ and 09. For WPA-PSK, you can enter eight to 63 keys. This network key needs to match the key you assign to your wireless router (or access point). 5. Click OK, then Apply to save the settings. Connecting your Computer to a Wireless Router (or Access Point) that uses WPA 1. Double-click the Signal Indicator icon to bring up the Wireless Network Properties screen. The Advanced button will allow you to view and configure more options of your Adapter. 2. Under the Wireless Networks tab, select a network name from the AP list and click Configure. 3. Under Network Authentication select WPA. 4. Under the Authentication tab, select the settings that are indicated by your network administrator. 5. Click OK, and then Apply to save the settings. DX-EBUSB Manaul_20071012 Page 20 of 30 Setting up WPA for Wireless Adapters that are not Manufactured by Dynex For WPA wireless desktop and wireless notebook cards and adapters that are NOT manufactured by Dynex, which are not equipped with WPA-enabled software, a free download from Microsoft called Windows XP Support Patch for Wireless Protected Access is available. Please Note: The download that Microsoft has made available works ONLY with Windows XP. Other operating systems are not supported at this time. Important: You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems:

Windows XP Professional Windows XP Home Edition Setting up Windows XP Wireless Network Utility to use WPA-PSK In order to use WPA-PSK, ensure that you are using the Windows Wireless Network Utility by doing the following:

1. Under Windows XP, click Start > Control Panel > Network Connections. 2. Right-click on Wireless Network Connection and select Properties. 3. Clicking on the Wireless Networks tab will display the following screen. Ensure the Use Windows to configure my wireless network settings box is checked. 4. Clicking the Configure button will allow you to choose your network authentication type. 5. For home or small business users, select WPA-PSK under Network Authentication. Note: Select WPA if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 6. Select TKIP or AES under Data Encryption. This setting will have to be identical to the wireless router that you set up. 7. Type in your encryption key in the Network key box. Important: Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. 8. Click OK to apply settings. DX-EBUSB Manaul_20071012 Page 21 of 30 Troubleshooting (header for section 8) I cant connect to the Internet wirelessly. If you are unable to connect to the Internet from a wireless computer, please check the following items:

1. Look at the lights on your wireless router. If you are using a Dynex Wireless Router, the lights should be as follows:

The Power light should be on. The Connected light should be on, and not blinking. The WAN light should be either on or blinking. If your Dynex Wireless Routers lights match these descriptions, go to number 2, below. If this is NOT the case, please contact Dynex technical support. If you are not using a Dynex Wireless Router, consult that router manufacturers user guide. 2. Open your Wireless Setup Utility software by clicking on the icon in the system tray at the bottom right-hand corner of the screen. If you are using a Dynex Wireless Adapter, the tray icon should look like this (the icon may be red or green):

(Designer please use chart found on P74845uk page 30) 3. The exact window that opens will vary depending on the model of Wireless Adapter you have; however, any of the utilities should list Available Networks, that is, networks to which you can connect. If you are using a Dynex Wireless G or Wireless Enhanced G Router, Dynex54g is the default name. If you are using a Dynex 802.11b Router, the default name should be WLAN. If you are NOT using a Dynex Router, please consult your router manufacturers user manual for the default name. DX-EBUSB Manaul_20071012 Page 22 of 30 The name of your wireless network appears in the AP list. If the correct network name is listed in the AP list, please follow the steps below to connect wirelessly:

1. Click on the correct network name in the AP list. 2. If the network has security (encryption) enabled, you will need to enter the network key. For more information regarding security, please see Securing your Wi-Fi Network on page XX [insert correct pg. no.] of this User Manual. 3. Within a few seconds, the tray icon in the lower right-hand corner of your screen should turn green, indicating a successful connection to the network. If you are still unable to access the Internet after connecting to the wireless network, please contact Dynex Technical Support. The name of your wireless network DOES NOT appear in the AP list. If the correct network name is not listed in the AP list in the Wireless Utility, please attempt the following troubleshooting steps:

1. Temporarily move computer, if possible, to five to 10 feet away from the wireless router (or access point). Close the Wireless Utility, and reopen it. If the correct network name now appears in the AP list, you may have a range or interference problem. Please see the suggestions listed in the Placement of your Wireless Networking Hardware for Optimal Performance section on page 2. 2. Using a computer that is connected to the wireless router (or access point) via a network cable (as opposed to wirelessly), ensure that Broadcast SSID is enabled. This setting is found on the routers wireless Channel and SSID configuration page. For detailed instructions on accessing this page and changing settings, please see your wireless routers (or access points) user manual. If you are still unable to access the Internet after completing these steps, please contact Dynex Technical Support. Installation CD-ROM does not start Wireless Setup Utility. If the CD-ROM does not start the Wireless Setup Utility automatically, it could be that the computer is running other applications that are interfering with the CD drive. If the Wireless Setup Utility screen does not appear within 15-20 seconds, open up your CD-ROM drive by double-clicking on the My Computer icon. Next, DX-EBUSB Manaul_20071012 Page 23 of 30 double-click on the CD-ROM drive that the Installation CD has been placed in to start the installation. Then double-click on the folder named Files. Next, double-

click on the icon named setup.exe. Power LED does not come ON; Adapter is not working. If the LED indicators are not ON, the problem may be that the Adapter is not connected or installed properly. Verify that the Adapters USB cable (attached to desktop stand) is plugged firmly into the USB slot of your computer. Check to see that the drivers for the Adapter have been installed. Right-click on the My Computer icon on your desktop. Choose Properties and navigate to the Device Manager and see if your Adapter is listed without any errors. If an error is indicated, contact Dynex Technical Support. Link LED is blinking slowly; cannot connect to a wireless network or the Internet. If your Adapter appears to be functioning properly, but you cannot connect to a network or you have a red wireless icon at the bottom of your screen, the problem may be that there is a mismatch between the network name (SSID) settings in your wireless network properties. Check the SSID settings to see if they match. The SSID is case-sensitive and the spelling on each computer must be exactly the same in order for the Adapter to connect to the wireless router (or access point). Note: To check the Adapter settings or look for an available network, double-click the Signal Indicator icon to bring up the Wireless Monitors screen. Click the AP List if you do not see the network you are trying to connect to. Click the Refresh button to scan the air for wireless networks. For more information about setting up an SSID, please refer to your router manufacturers user manual. If issues persist even at close range, please contact Dynex Technical Support. Link LED is solid but I cannot connect to the Internet. DX-EBUSB Manaul_20071012 Page 24 of 30 If you have a signal but cant get online or obtain an IP address, the problem may be that there is a mismatch between the encryption key settings in your computer and wireless router (or access point). Check the WEP key settings to see if they match. The key is case-sensitive and the spelling on each computer and wireless router (or access point) must be exactly the same in order for the Adapter to connect to the router. For more information about encryption, please see the Securing your Wi-Fi Network section in this User Manual. If issues persist even at close range, please contact Dynex Technical Support. Data transfer is sometimes slow. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. As a result, the typical indoor range of your wireless devices will be between 100 to 200 feet. Note also that connection speed may decrease as you move farther from the wireless router (or access point). In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, to five to 10 feet away from the wireless router (or access point). Please see the section titled Placement of your Wireless Networking Hardware for Optimal Performance in this User Manual. If issues persist even at close range, please contact Dynex Technical Support. Why are there two wireless utilities in my system tray? Which one should I use?

There are several features and advantages to using the Dynex Wireless Setup Utility over the Windows XP Wireless Zero Configuration utility. We offer a site survey, detailed link information, and adapter diagnosis, to name a few. Its essential to know which utility is managing your Adapter. We recommend using the Dynex Wireless Setup Utility. To use the Dynex Wireless Setup Utility, follow the steps below:

Step 1 Right-click on the network status icon in the system tray and select View Available Wireless Networks. Step 2 Click on the Advanced button in the lower left-hand corner of the Available Wireless Networks window. DX-EBUSB Manaul_20071012 Page 25 of 30 Step 3 From the Advanced tab, uncheck Use Windows to configure my wireless network. Once the box is unchecked, click OK to close the window. You are now using the Dynex Wireless Setup Utility to configure the Adapter. Whats the difference between 802.11b, 802.11g, 802.11a, and Pre-N?

Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation for certifying network standards. The most common wireless networking standard, 802.11b, transmits information at 11Mbps; 802.11a and 802.11g work at 54Mbps;

and Pre-N works at 108Mbps. Pre-N, the precursor to the upcoming 802.11n release, promises speeds that exceed 802.11g, and up to twice the wireless coverage area. See the following chart for more detailed information. Wireless Comparison Chart Wireless Technology Speed Dynex Pre-N 802.11b 802.11g 802.11a 11Mbps 54Mbps 54Mbps Frequency Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11b Compatibility Compatible with 802.11g Coverage*

Depends on interference typically 100 200 ft. indoors Depends on interference typically 300 400 ft. indoors Advantage Mature legacy technology Common widespread use for Internet sharing 600% faster than standard 802.11g*

Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g or 802.11b Up to 800%

wider coverage than standard 802.11g*

Leading edgebest coverage and throughput 5GHz uncrowded band Incompatible with 802.11b or 802.11g Interference range is typically 50 100 ft. Less interference great for multimedia application DX-EBUSB Manaul_20071012 Page 26 of 30

*Distance and connection speeds will vary depending on your networking environment. Technical Support You can find technical support information at www.Dynexsupport.com . If you want to contact technical support by phone, please call:

(800) 305-2204 Information (header for section 9) Wi-Fi Interoperability Certificate FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY Dynex declares that DX-EBUSB (FCC ID: K7SDX-EBUSBB) is limited in CH1-

CH11 by specified firmware controlled in U.S.A. We, Best Buy,,of 7601 Penn Avenue South Richfield, MN USA 55423-3645, declare under our sole responsibility that the product, DX-EBUSB to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. DX-EBUSB Manaul_20071012 Page 27 of 30 Caution: Exposure to Radio Frequency Radiation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in laptops (notebooks) with side slot configuration. The average SAR value of CCK is 0.825W/kg; the average SAR value of OFDM is 0.704W/kg. Operation of this product marketed in the USA is firmware-limited to 2.4GHz channel 1 to 11. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Best Buy may void the users authority to operate the equipment. Canada-Industry Canada (IC) To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. DX-EBUSB Manaul_20071012 Page 28 of 30 The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Dynex Corporation Limited Lifetime Product Warranty What this warranty covers. Dynex Corporation warrants to the original purchaser of this Dynex product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Dynex Corporation warrants the Dynex product for the lifetime of the product. What will we do to correct problems?

Product Warranty. Dynex will repair or replace, at its option, any defective product free of charge

(except for shipping charges for the product). What is not covered by this warranty?

All above warranties are null and void if the Dynex product is not provided to Dynex Corporation for inspection upon Dynexs request at the sole expense of the purchaser, or if Dynex Corporation determines that the Dynex product has been improperly installed, altered in any way, or tampered with. The Dynex Product Warranty does not protect against acts of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service. To get service for your Dynex product you must take the following steps:

1. Contact Dynex Corporation at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:

a. The part number of the Dynex product. b. Where you purchased the product. c. When you purchased the product. DX-EBUSB Manaul_20071012 Page 29 of 30 d. Copy of original receipt. 2. Your Dynex Customer Service Representative will then instruct you on how to forward your receipt and Dynex product and how to proceed with your claim. Dynex Corporation reserves the right to review the damaged Dynex product. All costs of shipping the Dynex product to Dynex Corporation for inspection shall be borne solely by the purchaser. If Dynex determines, in its sole discretion, that it is impractical to ship the damaged equipment to Dynex Corporation, Dynex may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Dynex Corporation reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF DYNEX CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL DYNEX CORPORATION BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY DYNEX PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. Designer please use chart found on P74845uk page 39) Dynex Tech Support

(800) 305-2204 DX-EBUSB Manaul_20071012 Page 30 of 30 2006 Dynex Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. 54g is a trademark of Broadcom Corporation in the United States and/or other countries. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance. P74845

F5D7051 Manual_20071012 Page 1 of 32

(Changes from P74471-D) Belkin Wireless G Plus USB Network Adapter Connect your desktop or notebook computer to a wireless network User Manual Table of Contents 1 Introduction . x Benefits of a Home Network . x Advantages of a Wireless Network . x Placement of your Wireless Networking Hardware for Optimal Performance . x 2 Overview. x Product Features . x Applications and Advantages . x Product Specifications . x System Requirements . x Package Contents.x 3 Knowing your Wireless G Plus USB Network Adapter..x 4 Installing and Setting up the USB Network Adapter . x Step 1: Install the Software . xx Step 2: Connect the USB Adapter to your PC . xx Step 3: Let Windows Finish the Installation 5 Uninstalling the Software and Driversxx 6 Using the Belkin Wireless LAN Monitor Utility. xx 7 Securing your Wi-Fi Network . xx 8 Troubleshooting. xx 9 Information . xx F5D7051 Manual_20071012 Page 2 of 32 Introduction (header for section 1) Thank you for purchasing the Belkin Wireless G Plus USB Network Adapter (the Adapter). Now you can take advantage of this great new technology and gain the freedom to network your home and office computers wirelessly. This Adapter allows you to connect a desktop or notebook computer to your network. The easy installation and setup will have you networking wirelessly in minutes. Please be sure to read through this User Manual completely, and pay special attention to the section entitled Placement of your Wireless Networking Hardware for Optimal Performance on page 2. Benefits of a Home Network Your Belkin Home Network will allow you to:

Share one high-speed Internet connection with all the computers in your home Share resources, such as files, and hard drives among all the connected computers in your home Share a single printer with the entire family Share documents, music, video, and digital pictures Store, retrieve, and copy files from one computer to another Simultaneously play games online, check Internet email, and chat Advantages of a Wireless Network Here are some of the advantages of setting up a Belkin wireless network:

Mobility youll no longer need a dedicated computer room now you can work on a networked laptop or desktop computer anywhere within your wireless range Easy installation Belkin Easy Installation Wizards make setup simple Flexibility set up and access printers, computers, and other networking devices from anywhere in your home Easy expansion the wide range of Belkin networking products let you expand your network to include devices such as printers and gaming consoles No cabling required you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office Widespread industry acceptance choose from a wide range of interoperable networking products Placement of your Wireless Networking Hardware for Optimal Performance F5D7051 Manual_20071012 Page 3 of 32 Your wireless connection will be stronger the closer your computer is to your wireless router (or access point). Typical indoor operating range for your wireless devices is between 300 and 400 feet. In the same way, your wireless connection and performance will degrade somewhat as the distance between your wireless router (or access point) and connected devices increases. This may or may not be noticeable to you. As you move farther from your wireless router (or access point), connection speed may decrease. Factors that can weaken signals simply by getting in the way of your networks radio waves are metal appliances or obstructions, and walls. If you have concerns about your networks performance that might be related to range or obstruction factors, try moving the computer to a position between five and 10 feet away from the wireless router (or access point) in order to see if distance is the problem. If difficulties persist even at close range, please contact Belkin Technical Support. Note: While some of the items listed below can affect network performance, they will not prohibit your wireless network from functioning; if you are concerned that your network is not operating at its maximum effectiveness, this checklist may help. 1. Placement of your Wireless Router (or Access Point) Place your wireless router (or access point), the central connection point of your network, as close as possible to the center of your wireless network devices. To achieve the best wireless network coverage for your wireless clients, (i.e. computers enabled by Belkin Wireless Notebook Cards, Wireless Desktop Cards, and Wireless USB Adapters):

Ensure that your wireless routers (or access points) antennas are parallel to each other, and are positioned vertically (toward the ceiling). If your wireless router (or access point) itself is positioned vertically, point the antennas as much as possible in an upward direction. In multistory homes, place the wireless router (or access point) on a floor that is as close to the center of the home as possible. This may mean placing the wireless router (or access point) on an upper floor. Try not to place the wireless router (or access point) near a cordless 2.4GHz phone 2. Avoid Obstacles and Interference Avoid placing your wireless router (or access point) near devices that may emit radio noise, such as microwave ovens. Other objects that can inhibit wireless communication can include:

F5D7051 Manual_20071012 Page 4 of 32 Refrigerators Washers and/or dryers Metal cabinets Large aquariums Metallic-based, UV-tinted windows If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signals path between your computers and wireless router (or access point). 3. Cordless Phone Placement If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

Try moving cordless phones away from the wireless router (or access point) and your wireless-enabled computers. Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturers information). If this fixes the problem, your phone may be interfering. If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network as possible. For example, change the phone to channel 1 and move your wireless router (or access point) to channel 11. (Your channel selection will vary depending on your region.) See your phones user manual for detailed instructions. If necessary, consider switching to a 900MHz or 5GHz cordless phone. 4. Choose the Quietest Channel for your Wireless Network In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours. Use the Site Survey capabilities of your Wireless Setup Utility to locate any other wireless networks, and move your wireless router (or access point) and computers to a channel as far away from other networks as possible. Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices. For more Belkin wireless networking products, use the detailed Site Survey and wireless channel information included in your User Manual. F5D7051 Manual_20071012 Page 5 of 32 5. Secure Connections, VPNs, and AOL Secure connections typically require a user name and password, and are used where security is important. Secure connections include:

Virtual Private Network (VPN) connections, often used to connect remotely to an office network The Bring Your Own Access program from America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service Most online banking websites Many commercial websites that require a user name and password to access your account Secure connections can be interrupted by a computers power management setting, which causes it to go to sleep. The simplest solution to avoid this is to simply reconnect by re-running the VPN or AOL software, or by re-logging into the secure website. A second alternative is to change your computers power management settings so it does not go to sleep; however, this may not be appropriate for portable computers. To change your power management setting in Windows, see the Power Options item in the Control Panel. If you continue to have difficulty with Secure Connections, VPNs, and AOL, please review steps 14 above to be sure you have addressed these issues. These guidelines should allow you to cover the maximum possible area with your wireless router. Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point. For more information regarding our networking products, visit our website at www.belkin.com/networking or call Belkin Technical Support. Overview (header for section 2) Product Features The Wireless G Plus USB Network Adapter complies with the IEEE 802.11g standard in order to communicate with other 802.11g-compliant wireless devices at 54Mbps or the faster G Plus. 2.4GHz ISM (Industrial, Science, and Medical) band operation Integrated, easy-to-use profile manager for storing multiple wireless network settings for work, school, home, or any other setup USB 2.0 interface, for Plug-and-Play installation and convenience in virtually any desktop or notebook computer F5D7051 Manual_20071012 Page 6 of 32 WPA security (Windows XP only), 64-bit WEP or 128-bit encryption Wireless access to networked resources Support for both infrastructure and ad-hoc (peer-to-peer) networking modes Packet transfer rate of up to 54Mbps Easy installation and use LED link/activity indicator Desktop stand allows you to position your Adapter for optimal wireless performance Applications and Advantages Wireless roaming with a laptop around the home or office Offers the freedom of networkingwithout cables Connection rates of up to 54Mbps Provides immediate wireless connectivity at home, work, and hotspot locations without compromising the use of existing 802.11b and 802.11g products Compatibility with 802.11b products 802.11g wireless LAN solutions are backward-compatible with existing Wi-Fi

(IEEE 802.11b) products and with other products that display the 54g logo Difficult-to-wire environments Enables networking in buildings with solid or finished walls, or open areas where wiring is difficult to install Frequently changing environments Adapts easily in offices or environments that frequently rearrange or change locations Temporary LANs for special projects or peak time Sets up temporary networks such as at trade shows, exhibitions, and construction sites, which need networks on a short-term basis; also companies who need additional workstations for a peak activity period SOHO (Small Office/Home Office) networking needs Provides the easy and quick, small network installation SOHO users need Product Specifications Host Interface:

This product is compatible with the USB 1.1 and USB 2.0 specification. To achieve maximum networking speeds (54Mbps), this device must be connected USB 2.0 F5D7051 Manual_20071012 Page 7 of 32 to a USB 2.0 host port on a PC. Connection of this device to a USB 1.1 host port will yield a maximum of 11Mbps networking speed. Power Consumption:

Certification:

Operating Temperature: 32131 F (055 C) Storage Temperature:

Typical Operating Range: Up to 200 ft.*

*Distance and connection speeds will vary depending on your networking environment FCC Class B, CE Mark, C-Tick

-13158 F (-2570 C) 500mA (max) System Requirements PC with one available USB port Windows 2000, XP, or Vista Package Contents Belkin Wireless G Plus USB Network Adapter with Desktop Stand (and attached USB cable) Quick Installation Guide Installation Software CD User Manual Knowing your Wireless G Plus USB Network Adapter (header of section 3)

(Designer please use image found on P74845uk page 8) Protective Cap Activity LED Indicates wireless activity when blinking Blinking Green: Scanning Off: No Activity On: Connected to Network USB Adapter Desktop Stand

(Optional Use) The cap snaps over the USB connector for protection. It can be stored on the opposite end of the USB connector. Installing and Setting up the USB Network Adapter (header for section 4) Step 1: Install the Software WARNING: Install the Software before Inserting the Adapter 1.1 Insert the CD into your CD-ROM drive. F5D7051 Manual_20071012 Page 8 of 32 1.2 The Belkin Wireless Setup Utility screen will automatically appear. If it does not appear within 1520 seconds, then select your CD-ROM drive and double-

click on the folder named Files. Next double-click on the icon named Start.exe. 1.3 In the menu window, click install to start the software installation program. 1.4 The installer will start. Click Next to continue.

(Designer please use image found on P74845uk page 9) 1.5 When the installer is done installing the software, you will see the following screen. Click Finish.

(Designer please use image found on P74845uk page 10) Step 2: Connect the USB Adapter to your PC 2.1 After the software installation is finished, the message You can plug in your WLAN adapter now will appear. Plug the Adapter into an available USB port on your desktop or notebook computer.

(Designer please use images found on P74845uk page 10) For desktops:

Product Placement The best location for your Adapter is on top of your computers monitor. Placing the Adapter on your desktop is acceptable; however, avoid placing the Adapter near metal objects such as a computer case or speakers. Any object that is metal has the ability to block the radio signals from the Adapter. Step 3: Let Windows Finish the Installation For notebooks:

F5D7051 Manual_20071012 Page 9 of 32 3.1 After you connect your Adapter, Windows will detect that new hardware has been installed. Depending on your version of Windows, a window similar to the one pictured here will appear. Select the option Install the software automatically

(Recommended) and click Next.

(Designer please use image found on P74845uk page 11) 3.2 If you are using Windows 98SE or Me, you will be asked to restart your computer. Select Restart. Click Finish.

(Designer please use image found on P74471 page 11) 3.3 When the installation is complete, the Belkin Wireless LAN Monitor Utility icon will appear on your taskbar. To open the Utility, double-click on this icon.

(Designer please use image found on P74471-C page 11) 3.4 A small icon in your system tray (bottom right corner of most screens) will appear. This is your shortcut to the Belkin Wireless LAN Monitor Utility. It also indicates the status of your connection:

Red: No connection to a wireless network

(Designer please use image found on P74845uk page 12) Blue: Connected to a wireless network

(Designer please use image found on P74845uk page 12) If you already have a wireless router (or an access point) in your home or office, the Adapter will automatically attempt to connect to your wireless network. In most cases, the Adapter will be able to connect to your network automatically. If you are using encryption, you will have to set the encryption settings of your Adapter to match that of your wireless router (or access point), before the Adapter can successfully connect to your wireless network. For information about configuring your Adapter, see the section in this User Manual called Profile Tab:

Creating a Profile on page XX. Uninstalling the Software and Drivers (header for section 5) If you need to remove the software and drivers for any reason, you can easily accomplish this in one of two ways. You can insert the software CD and click on the Uninstall option in the menu, or you can go to the Windows Control Panel and select the Add/Remove Programs option. The Belkin Wizard will walk you through the removal process. F5D7051 Manual_20071012 Page 10 of 32 Using the Belkin Wireless LAN Monitor Utility (header for section 6) To launch the Wireless LAN Monitor Utility, double-click the icon in the system tray (right side of taskbar). The window below appears.

(Designer please use image found on P74845uk page 14) Double-clicking on the icon in the system tray will open the Wireless Monitor window. Status Tab When you see the Utility icon on your taskbar, you can control your USB Adapter through it. Double-click on the icon to open the Utility. The first tabStatusis visible. From this tab you can see your current connection status on the screen. In the illustration below, the display of numerals 1 and 0 between the computer and the wireless router (or access point) indicates an active connection. This diagram also shows that there is a connection to the Internet by displaying the numerals 1 and 0 between the wireless router (or access point) and the Internet.

(Designer please use image found on P74845uk page 14) The display of numerals 1 and 0 here indicates a connection. If there is no connection between the computer and wireless router (or access point), and/or the Internet, an X will be displayed.

(a) Current Profile String This indicates the name of the profile you are currently using, if any. If a question mark appears next to the text in this box, there is no profile set up for the network to which you are currently connected. If this is the case, the name of that network will be displayed in this box.

(b) More Button Press the More button to see detailsincluding the name, signal strength, signal-link quality, IP informationfor the network to which you are connected

(see image below).

(Designer please use image found on P74845uk page 15) F5D7051 Manual_20071012 Page 11 of 32 Access Point (AP) List Tab To view a list of all available networks in your area, select the AP List tab. In this window, you will be presented with a list of the available networks.

(Designer please use image found on P74845uk page 16)

(a) Network Name This column shows you the name of the wireless network that is available. On the left side of the network name are small icons that advise you of specific details about the network. A blue circle around the network icon (e) indicates that you are currently connected to this network. A small padlock icon (f) next to a network name indicates that this network is secured (either by WEP or WPA encryption). It is not possible to connect to a secured network without the proper network key.

(b) Band This column indicates on which band the network is operating. G indicates that it is an 802.11g-based network. B indicates it is an 802.11b-based network.

(c) Signal This column indicates the signal strength of the wireless network. Typically, the stronger the signal strength, the closer the network is to your physical location. The lower the signal strength, the farther away from the network you are.

(d) Site Information When you highlight a network name in the AP list by clicking on it once, the detailed information about that network will be available here. You will see what type of network it is (Access Point or Peer-to-Peer), what channel the network is operating on, the status of encryption (security) (On or Off), and (below Surveyed at:) the MAC address of that wireless network. How to connect to a wireless network in the Access Point (AP) list:

There are two ways to connect to a network that appear in the AP list. 1. Highlight the network name by clicking on it once, then click the Connect button on the bottom of the window. or 2. Double-click a network name that is in the AP list. This will connect you to the network automatically. Note: If the network to which you are attempting to connect is using encryption, you will be prompted to create a profile with the encryption settings. How to Update the Access Point (AP) List Information F5D7051 Manual_20071012 Page 12 of 32 Pressing the Refresh (g) button will make the USB Adapter scan the air for available wireless networks. The list will be updated. Profile Tab: Creating a Profile Using profiles allows you to save configurations for different wireless networks. For instance, if you use your Adapter at your place of work and also at your home, your wireless network settings may be different for each location. Profiles let you store settings for each location and name them for easy identification. You can quickly change from one profile to another profile without having to remember the particular settings of a certain network.

(Designer please use image found on P74845uk page 17) Creating a New Profile 1. Click Add to open the new profile screen. Type in a name for the profile. The name can be anything you want. You should pick something easy to remember like Work, for your work network or Home, for your home network. Click Next to continue.

(Designer please use image found on P74845uk page 18) 2. The next screen you will see allows you to type in the name of the network you will be connecting to and the type of network it is. It gives you the option of setting the data rate for that network.

(Designer please use image found on P74845uk page 18)

(a) In the Network Name box, type in the exact name of the network you will be connecting to. The Network Name is the same as the network SSID.

(b) In the Network Type box, select the type of network to which you will be connecting. Select Access Point if it is a network with a wireless router or access point (this is most common). Select Peer-to-Peer if this is a direct connection to another computer.

(c) We suggest that you leave the Transfer Rate box set on Automatic unless there is a specific need to change this setting.

(Designer please use image found on P74845uk page 19) Click Next to continue. 3. The next screen allows you to input security encryption settings for the network. If the network is not encrypted, then leave the mode set to Off and click Complete. F5D7051 Manual_20071012 Page 13 of 32 If the network is encrypted, you will need to have the network key and key type

(open or shared). This information is the same as it is for your wireless router or access point. In a larger-office setting, this information is typically available from the network administrator. TIP: Most networks with WEP use the Open System key type. For more detailed information, go to the section titled Securing your Wireless Network on page xx in this User Manual.

(a) Select the Authentication Mode from the drop-down menu.

(Designer please use image found on P74845uk page 19)

(b) After selecting the Authentication Mode, select the encryption type your network uses from the Encryption drop-down menu. Please see the section of this User Manual titled Securing your Wireless Network on page xx for information on which type of WEP encryption to use. Click Next.

(Designer please use image found on P74845uk page 20)

(c) The next screen allows you to select the key input method: either ASCII, Hexadecimal, or Passphrase. The method you choose will be determined by, and should be the same as, the method used by your wireless router or access point. TIP: Most keys are Hexadecimal (consists of letters and numbers from 09 and AF). (Designer please use image found on P74845uk page 20)

(d) Enter the key in the Key box and select the key to use in the Key Index drop-down menu. Your network administrator should provide this information. TIP: Most keys use Key Index 1.

(Designer please use image found on P4845uk page 21)

(e) Click Complete to save the profile. To begin using your new profile, highlight the profile name by clicking on the name one time, then click Connect.

(Designer please use image found on P74845uk page 21) How to Find and Connect to a Wireless Network 1. Open the Wireless Monitor window by double-clicking the icon in your system tray. 2. Click on the AP List tab (a). This will display a list of all of the networks in your area.

(Designer please use image found on P74845uk page 22) F5D7051 Manual_20071012 Page 14 of 32 3. Double-click on the network to which you want to connect. A blue circle (b)

(Designer please use image found on P74845uk page 22) should appear around the network icon next to the name of the network you selected. This means you are connected to the network. If the network is using encryption security, you will be prompted to make a profile for that network in order to connect. See the section of this User Manual called Profile Tab: Creating a Profile on page xx [fill in correct page no.] for information. Windows XP Users If you are using Windows XP, please read this section. (Designer please bold text) Windows XP integrates a wireless management utility referred to as Windows XP Wireless Zero Configuration service (WZC). The WZC can be used to control your Adapter or you can use the Belkin Wireless LAN Monitor Utility. We suggest that you use the Belkin Utility to control your Adapter. If you choose to use the WZC, directions for operation of the WZC are available in the Windows XP help file. When you first install the Adapter, the Belkin Utility will be enabled. If you want to disable the Belkin Utility in order to use the WZC, follow the steps below to disable the Belkin Utility. Disabling the Windows Zero Configuration (WZC) in Windows XP 1. Right-click on the system tray icon.

(Designer please use image found on P74845uk page23) 2. In the menu, select Enable Windows Zero Configuration (WZC).

(Designer please use image found on P74471-C page 23) 3. To enable the Belkin Utility, right-click on the system tray icon. 4. In the menu, select Disable Windows Zero Configuration (WZC)

(Designer please use image found on P74471-C page 23) Setting up Windows XP Wireless Network Utility to use WPA-PSK In order to use WPA-PSK, ensure that you are using Windows Wireless Network Utility by doing the following:

1. Right-click on Wireless Network Connection and select Properties. 2. Clicking on the Wireless Networks tab will display the following screen. Ensure the Use Windows to configure my wireless network settings box is checked. F5D7051 Manual_20071012 Page 15 of 32 3. Clicking the Configure button will allow you to choose your Network Authentication type.

(Designer please use image found on P74845uk page 24) 4. For home or small business users, select WPA-PSK under Network Authentication.

(Designer please use image found on P74845uk page 25) Note: Select WPA if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 5. Select TKIP or AES under Data Encryption. This setting must be identical to the wireless router that you set up. 6. Type your encryption key into the Network key box. Important: Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. 7. Click OK to apply settings. Setting up Windows XP WZC Utility to use WPA Note: If you have not done so already, you must download the WPA update from Microsoft Windows Update to enable WPA support. This can be found at the Microsoft website by searching for the term WPA Wireless. Locate the update called KB826942, download it, and update your operating system. Securing your Wi-Fi Network (header for section 7) Here are a few different ways to maximize the security of your wireless network and protect your data from unwanted intrusions. This section is intended for the home, home office, and small office user. At the time of publication, four encryption methods are available. Encryption Methods:

Name 64-Bit Wired Equivalent Privacy 128-Bit Encryption Wi-Fi Protected Access Wi-Fi Protected Access F5D7051 Manual_20071012 Page 16 of 32 Acronym Security Features 64-bit WEP Good Static keys 128-bit Better Static keys Encryption keys based on RC4 algorithm

(typically 40-bit keys) Added security over 64-bit WEP using a key length of 104 bits, plus 24 additional bits of system-

generated data WPA-TKIP Best Dynamic key encryption and mutual authentication TKIP

(Temporal Key Integrity Protocol) added so that keys are rotated and encryption is strengthened WPA-AES Best Dynamic key encryption and mutual authentication AES

(Advanced Encryption Standard) does not cause any throughput loss Securing your Wireless Network Most wireless products ship with security turned off. This means that once you have your network working, you may need to activate WEP or WPA and make sure all your wireless devices are sharing the same network key. The following diagram shows the effect of not having the correct network key throughout your network.

(Designer please use chart found on P74845uk page 27)

[image computer]

Network Key=

MyPassword

[image router]

Network Key=

MyPassword

[image computer]

Network Key=

MyPassword

[image computer]

Network Key=

WRONG Password The Adapter cannot access the network because it uses a different network key than the one configured on the wireless router. F5D7051 Manual_20071012 Page 17 of 32 Setting up your Belkin Wireless Router (or Access Point) to use Security To start using security, you need to first enable WEP or WPA for your wireless router (or access point). For Belkin Wireless Routers and Access Points, these security features can be configured by using the web-based interface. (See your wireless routers (or access points) manual for directions on how to access the management interface.) Your Dynex wireless adapter is equipped with the latest security standard called Wi-Fi Protected Access 2 (WPA2) and the legacy security standard called Wired Equivalent Privacy (WEP). It also supports the Wi-Fi Protected Setup (WPS) specification, which simplifies the setup of a wireless network. WPS uses familiar methodologies, such as typing in a Personal Identification Number (PIN) or pushing a button, to enable users to automatically configure network names and strong WPA/WPA2 data encryption and authentication. Using Wi-Fi Protected Setup 1. Encryption key if not using WPS 2. Personal Identification Number (PIN) Method: In this method, your wireless adapter will generate a PIN to be entered into your router 3. Push Button Configuration (PBC) Method: Your wireless adapter can also connect by using the software push button. 4. Manual Configuration Method: This section lists the default security settings to be set up if not using WPS. WPS uses WPA2 (described below) for encryption. It does not provide additional security, but rather, standardizes the method for securing your wireless network. F5D7051 Manual_20071012 Page 18 of 32 On your client utility, WPS-enabled networks are denoted with the key icon. You may use either the Push Button Configuration (PBC) method or PIN method to allow a device access to your wireless network. Conceptually, the two methods work as follows:

PBC: Push and hold the WPS button located on the back of your router for three seconds. Then, initiate the WPS procedure on the client utility within two minutes. Select the network name in the utility and click Connect. Your client will automatically exchange the security information and be added to your wireless network. The Push Button Configuration method can also be initiated from the client side. PIN: Your client device has an eight digit PIN number that is associated with WPS. Select the WPS-enabled network and click Connect to start the WPS process. Choose the PIN method option and complete the WPS procedure on your router. The client will be automatically enrolled into your wireless network within two minutes.

(insert WPS image) WEP Setup 64-Bit WEP Encryption 1. Select 64-bit WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 09. For 64-bit WEP, you need to enter 10 hex keys. F5D7051 Manual_20071012 Page 19 of 32 For instance:

AF 0F 4B C3 D4 = 64-bit WEP key

(Designer please use chart found on P74845uk page 28) 3. Click Apply Changes to finish. Encryption in the Wireless Router (or Access Point) is now set. Each of your computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are using a wireless client to turn on the security settings in your Wireless Router (or Access Point), you will temporarily lose your wireless connection until you activate security on your wireless client. 128-Bit WEP Encryption 1. Select 128-bit WEP from the drop-down menu. 2. After selecting your WEP encryption mode, you can enter your key manually by typing in the hex key manually, or you can type in a passphrase in the Passphrase field and click Generate to create a key. A hex (hexadecimal) key is a combination of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 hex keys. For instance:

C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key 3. Click Apply Changes to finish. Encryption in the Wireless Router (or Access Point) is now set. Each of the computers on your wireless network will now need to be configured with the same security settings. WARNING: If you are using a wireless client to turn on the security settings in your Wireless Router (or Access Point), you will temporarily lose your wireless connection until you activate security on your wireless client. WPA-PSK (no server) Choose this setting if your network does not use a radius server. WPA-PSK (no server) is typically used in home and small office networking. 1. From the Security Mode drop-down menu, select WPA-PSK (no server). 2. Enter your network key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients

(network cards) that you want to include in your network. 3. Click Apply Changes to finish. You must now set all clients (network cards and adapters) to match these settings. F5D7051 Manual_20071012 Page 20 of 32 WPA (with server) Settings Choose this setting if your network uses a radius server to distribute keys to the clients (network cards and adapters). This is typically used in business networks. 1. From the Security Mode drop-down menu, select WPA (with server). 2. Enter the IP address of the radius server into the Radius Server fields. 3. Enter the radius key into the Radius Key field. 4. Enter the key interval. The key interval is how often the keys are distributed (in packets). 5. Click Apply Changes to finish. Connecting your Computer to a Wireless Router (or Access Point) that Requires a 64-Bit or 128-Bit WEP Key 1. Double-click the Signal Indicator icon to bring up the Wireless Network screen. The Advanced button will allow you to view and configure more options of your Adapter. 2. Under the Wireless Network tab, select a network name from the AP list and click Configure. 3. Under Data Encryption select WEP. 4. Ensure that the check box Network key is provided for me automatically at the bottom is unchecked. If you are using this computer to connect to a corporate network, please consult your network administrator if this box needs to be checked. 5. Type your WEP key in the Network key and Confirm key boxes. Important: A WEP key is a combination of numbers and letters from AF and 09. For 128-bit WEP, you need to enter 26 keys. For 64-bit WEP, you need to enter 10 keys. This network key needs to match the key you assign to your wireless router (or access point). 6. Click OK, and then Apply to save the settings. Connecting your Computer to a Wireless Router (or Access Point) that uses WPA-PSK (no server) 1. Double-click the Signal Indicator icon to bring up the Wireless Network Properties screen. The Advanced button will allow you to view and configure more options of your Adapter. F5D7051 Manual_20071012 Page 21 of 32 2. Under the Wireless Networks tab, select a network name from the AP list and click Configure. 3. Under Network Authentication select WPA-PSK. 4. Type your WPA key in the Network key box. Important: WPA-PSK is a combination of numbers and letters from AZ and 09. For WPA-PSK, you can enter eight to 63 keys. This network key needs to match the key you assign to your wireless router (or access point). 5. Click OK, then Apply to save the settings. Connecting your Computer to a Wireless Router (or Access Point) that uses WPA 1. Double-click the Signal Indicator icon to bring up the Wireless Network Properties screen. The Advanced button will allow you to view and configure more options of your Adapter. 2. Under the Wireless Networks tab, select a network name from the AP list and click Configure. 3. Under Network Authentication select WPA. 4. Under the Authentication tab, select the settings that are indicated by your network administrator. 5. Click OK, and then Apply to save the settings. Setting up WPA for Wireless Adapters that are not Manufactured by Belkin For WPA wireless desktop and wireless notebook cards and adapters that are NOT manufactured by Belkin, which are not equipped with WPA-enabled software, a free download from Microsoft called Windows XP Support Patch for Wireless Protected Access is available. Please Note: The download that Microsoft has made available works ONLY with Windows XP. Other operating systems are not supported at this time. Important: You also need to ensure that the wireless card manufacturer supports WPA and that you have downloaded and installed the latest driver from their support site. Supported Operating Systems:

Windows XP Professional Windows XP Home Edition F5D7051 Manual_20071012 Page 22 of 32 Setting up Windows XP Wireless Network Utility to use WPA-PSK In order to use WPA-PSK, ensure that you are using the Windows Wireless Network Utility by doing the following:

1. Under Windows XP, click Start > Control Panel > Network Connections. 2. Right-click on Wireless Network Connection and select Properties. 3. Clicking on the Wireless Networks tab will display the following screen. Ensure the Use Windows to configure my wireless network settings box is checked. 4. Clicking the Configure button will allow you to choose your network authentication type. 5. For home or small business users, select WPA-PSK under Network Authentication. Note: Select WPA if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server. Please consult your network administrator for further information. 6. Select TKIP or AES under Data Encryption. This setting will have to be identical to the wireless router that you set up. 7. Type in your encryption key in the Network key box. Important: Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must be used on all of the clients that you set up. 8. Click OK to apply settings. Troubleshooting (header for section 8) I cant connect to the Internet wirelessly. If you are unable to connect to the Internet from a wireless computer, please check the following items:

1. Look at the lights on your wireless router. If you are using a Belkin Wireless Router, the lights should be as follows:

The Power light should be on. The Connected light should be on, and not blinking. The WAN light should be either on or blinking. If your Belkin Wireless Routers lights match these descriptions, go to number 2, below. F5D7051 Manual_20071012 Page 23 of 32 If this is NOT the case, please contact Belkin technical support. If you are not using a Belkin Wireless Router, consult that router manufacturers user guide. 2. Open your Wireless Setup Utility software by clicking on the icon in the system tray at the bottom right-hand corner of the screen. If you are using a Belkin Wireless Adapter, the tray icon should look like this (the icon may be red or green):

(Designer please use chart found on P74845uk page 30) 3. The exact window that opens will vary depending on the model of Wireless Adapter you have; however, any of the utilities should list Available Networks, that is, networks to which you can connect. If you are using a Belkin Wireless G or Wireless G Plus Router, Belkin54g is the default name. If you are using a Belkin 802.11b Router, the default name should be WLAN. If you are NOT using a Belkin Router, please consult your router manufacturers user manual for the default name. The name of your wireless network appears in the AP list. If the correct network name is listed in the AP list, please follow the steps below to connect wirelessly:

1. Click on the correct network name in the AP list. 2. If the network has security (encryption) enabled, you will need to enter the network key. For more information regarding security, please see Securing your Wi-Fi Network on page XX [insert correct pg. no.] of this User Manual. 3. Within a few seconds, the tray icon in the lower right-hand corner of your screen should turn green, indicating a successful connection to the network. If you are still unable to access the Internet after connecting to the wireless network, please contact Belkin Technical Support. The name of your wireless network DOES NOT appear in the AP list. If the correct network name is not listed in the AP list in the Wireless Utility, please attempt the following troubleshooting steps:

F5D7051 Manual_20071012 Page 24 of 32 1. Temporarily move computer, if possible, to five to 10 feet away from the wireless router (or access point). Close the Wireless Utility, and reopen it. If the correct network name now appears in the AP list, you may have a range or interference problem. Please see the suggestions listed in the Placement of your Wireless Networking Hardware for Optimal Performance section on page 2. 2. Using a computer that is connected to the wireless router (or access point) via a network cable (as opposed to wirelessly), ensure that Broadcast SSID is enabled. This setting is found on the routers wireless Channel and SSID configuration page. For detailed instructions on accessing this page and changing settings, please see your wireless routers (or access points) user manual. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support. Installation CD-ROM does not start Wireless Setup Utility. If the CD-ROM does not start the Wireless Setup Utility automatically, it could be that the computer is running other applications that are interfering with the CD drive. If the Wireless Setup Utility screen does not appear within 15-20 seconds, open up your CD-ROM drive by double-clicking on the My Computer icon. Next, double-click on the CD-ROM drive that the Installation CD has been placed in to start the installation. Then double-click on the folder named Files. Next, double-

click on the icon named setup.exe. Power LED does not come ON; Adapter is not working. If the LED indicators are not ON, the problem may be that the Adapter is not connected or installed properly. Verify that the Adapters USB cable (attached to desktop stand) is plugged firmly into the USB slot of your computer. Check to see that the drivers for the Adapter have been installed. Right-click on the My Computer icon on your desktop. Choose Properties and navigate to the Device Manager and see if your Adapter is listed without any errors. If an error is indicated, contact Belkin Technical Support. Link LED is blinking slowly; cannot connect to a wireless network or the Internet. F5D7051 Manual_20071012 Page 25 of 32 If your Adapter appears to be functioning properly, but you cannot connect to a network or you have a red wireless icon at the bottom of your screen, the problem may be that there is a mismatch between the network name (SSID) settings in your wireless network properties. Check the SSID settings to see if they match. The SSID is case-sensitive and the spelling on each computer must be exactly the same in order for the Adapter to connect to the wireless router (or access point). Note: To check the Adapter settings or look for an available network, double-click the Signal Indicator icon to bring up the Wireless Monitors screen. Click the AP List if you do not see the network you are trying to connect to. Click the Refresh button to scan the air for wireless networks. For more information about setting up an SSID, please refer to your router manufacturers user manual. If issues persist even at close range, please contact Belkin Technical Support. Link LED is solid but I cannot connect to the Internet. If you have a signal but cant get online or obtain an IP address, the problem may be that there is a mismatch between the encryption key settings in your computer and wireless router (or access point). Check the WEP key settings to see if they match. The key is case-sensitive and the spelling on each computer and wireless router (or access point) must be exactly the same in order for the Adapter to connect to the router. For more information about encryption, please see the Securing your Wi-Fi Network section in this User Manual. If issues persist even at close range, please contact Belkin Technical Support. Data transfer is sometimes slow. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases. Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances. As a result, the typical indoor range of your wireless devices will be between 100 F5D7051 Manual_20071012 Page 26 of 32 to 200 feet. Note also that connection speed may decrease as you move farther from the wireless router (or access point). In order to determine if wireless issues are related to range, we suggest temporarily moving the computer, if possible, to five to 10 feet away from the wireless router (or access point). Please see the section titled Placement of your Wireless Networking Hardware for Optimal Performance in this User Manual. If issues persist even at close range, please contact Belkin Technical Support. Why are there two wireless utilities in my system tray? Which one should I use?

There are several features and advantages to using the Belkin Wireless Setup Utility over the Windows XP Wireless Zero Configuration utility. We offer a site survey, detailed link information, and adapter diagnosis, to name a few. Its essential to know which utility is managing your Adapter. We recommend using the Belkin Wireless Setup Utility. To use the Belkin Wireless Setup Utility, follow the steps below:

Step 1 Right-click on the network status icon in the system tray and select View Available Wireless Networks. Step 2 Click on the Advanced button in the lower left-hand corner of the Available Wireless Networks window. Step 3 From the Advanced tab, uncheck Use Windows to configure my wireless network. Once the box is unchecked, click OK to close the window. You are now using the Belkin Wireless Setup Utility to configure the Adapter. Whats the difference between 802.11b, 802.11g, 802.11a, and Pre-N?

Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds. Each is based on the designation for certifying network standards. The most common wireless networking standard, 802.11b, transmits information at 11Mbps; 802.11a and 802.11g work at 54Mbps;

and Pre-N works at 108Mbps. Pre-N, the precursor to the upcoming 802.11n release, promises speeds that exceed 802.11g, and up to twice the wireless coverage area. See the following chart for more detailed information. F5D7051 Manual_20071012 Page 27 of 32 Belkin Pre-N 600% faster than standard 802.11g*

Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11g or 802.11b Up to 800%

wider coverage than standard 802.11g*

Leading edgebest coverage and throughput Wireless Comparison Chart Wireless Technology Speed 802.11b 11Mbps 802.11g 54Mbps 802.11a 54Mbps Frequency Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz Compatible with 802.11b Compatibility Compatible with 802.11g Coverage*

Depends on interference typically 100 200 ft. indoors Depends on interference typically 300 400 ft. indoors 5GHz uncrowded band Incompatible with 802.11b or 802.11g Interference range is typically 50 100 ft. Advantage Mature legacy technology Common widespread use for Internet sharing Less interference great for multimedia application

*Distance and connection speeds will vary depending on your networking environment. Technical Support You can find technical support information at www.belkin.com or www.belkin.com/networking. If you want to contact technical support F5D7051 Manual_20071012 Page 28 of 32 by phone, please call:

US: 877-736-5771 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Information (header for section 9) Wi-Fi Interoperability Certificate FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY Belkin declares that F5D7051 (FCC ID: K7SF5D7051D) is limited in CH1-CH11 by specified firmware controlled in U.S.A. We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D7051 to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Exposure to Radio Frequency Radiation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in laptops (notebooks) with side slot configuration. The average SAR value of CCK is 0.013W/kg; the average SAR value of OFDM is 0.00809W/kg. Operation of this product marketed in the USA is firmware-limited to 2.4GHz channel 1 to 11. F5D7051 Manual_20071012 Page 29 of 32 Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the users authority to operate the equipment. Canada-Industry Canada (IC) To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B conforme la norme NMB-003 du Canada. Europe-European Union Notice Radio products with the CE 0682 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 60950 (IEC60950) Product Safety F5D7051 Manual_20071012 Page 30 of 32 EN 300 328 Technical requirement for radio equipment ETS 300 826 General EMC requirements for radio equipment To determine the type of transmitter, check the identification label on your Belkin product. Products with the CE marking comply with the EMC Directive

(89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 55022 (CISPR 22) Electromagnetic Interference EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics EN 61000-3-3 (IEC610000) Power Line Flicker EN 60950 (IEC60950) Product Safety Products that contain the radio transmitter are labeled with CE 0682 or CE alert marking and may also carry the CE logo. Belkin Corporation Limited Lifetime Product Warranty What this warranty covers. Belkin Corporation warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin Corporation warrants the Belkin product for the lifetime of the product. What will we do to correct problems?

Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge

(except for shipping charges for the product). What is not covered by this warranty?

All above warranties are null and void if the Belkin product is not provided to Belkin Corporation for inspection upon Belkins request at the sole expense of the purchaser, or if Belkin Corporation determines that the Belkin product has been improperly installed, altered in any way, or tampered with. The Belkin Product Warranty does not protect against acts of God (other than lightning) such as flood, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program, or system equipment modification or alteration. How to get service. To get service for your Belkin product you must take the following steps:

F5D7051 Manual_20071012 Page 31 of 32 1. 2. Contact Belkin Corporation at 501 W. Walnut St., Compton CA 90220, Attn: Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be prepared to provide the following information:

a. The part number of the Belkin product. b. Where you purchased the product. c. When you purchased the product. d. Copy of original receipt. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin Corporation reserves the right to be subrogated under any existing insurance policies the purchaser may have. How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN CORPORATION, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT SHALL BELKIN CORPORATION BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state. Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you. F5D7051 Manual_20071012 Page 32 of 32 Designer please use chart found on P74845uk page 39) Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Los Angeles, CA 90220, USA 310-898-1100 310-898-1111 fax Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom

+44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia

+61 (0) 2 4372 8600

+61 (0) 2 4372 8603 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. 54g is a trademark of Broadcom Corporation in the United States and/or other countries. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the Wi-Fi Alliance. P74845