FCC ID: RLI-MB8800 2.4G+WiFi Smart Router

by: Bellnet Technologies Co.,Ltd latest update: 2014-10-20 model: MB8800

Two grants have been issued under this FCC ID on 10/20/2014 (this is one of two releases in 2014 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, password defaults, troubleshooting guides, warrantee terms, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 10
1 ~ 2014-10-20 8
2 ~ 2014-10-20 9

app s				submitted / available
1 2	User Manual	Users Manual	pdf	1.85 MiB
1 2		Cover Letter(s)	pdf
1 2		Cover Letter(s)	pdf
1 2		External Photos	pdf
1 2		ID Label/Location Info	pdf
1 2		Internal Photos	pdf
1 2		Test Report	pdf
1 2		Test Setup Photos	pdf
1 2		RF Exposure Info	pdf
1 2		Test Report	pdf

exhibit
download
text

1 2

User Manual

Users Manual

pdf

1.85 MiB

BELLNET Technologies. ---- MB8800 Belled User Guide Belleds MB8800 2.4G+WiFi Smart Router User Guide

- 1 -

BELLNET Technologies. ---- MB8800 Belled User Guide CONTENT 1 INTRODUCTION ....................................................................................................... 3 1.1 VERIFY KIT CONTENTS.......................................................................................... 3 1.2 CONNECTION........................................................................................................ 3 2 CONFIGURATION..................................................................................................... 4 2.1 CONFIGURATION IN PC.......................................................................................... 4 2.2 CONFIGURATION IN DETAIL..................................................................................... 6 2.2.1 Music Service .............................................................................................. 6 2.2.2 Basic Settings.............................................................................................. 9 2.2.3 Internet Connection ................................................................................... 15 2.2.4 Upgrade Firmware..................................................................................... 20 3 BELLEDS IN MOBILE............................................................................................. 25 3.1 PREPARATION (HARDWARE & SOFTWARE)............................................................ 25 3.2 CONFIGURATION IN MOBILE ................................................................................. 27 3.3 PLAY MUSIC ....................................................................................................... 28 3.3.1 Music List................................................................................................... 28 3.3.2 Music Play ................................................................................................. 29 3.3.3 Music & LEDs synchronize ........................................................................ 32 3.4 LED CONTROL.................................................................................................... 33 3.4.1 ON and OFF .............................................................................................. 34 3.4.2 Adjust Color of LEDs ................................................................................. 34

- 2 -

BELLNET Technologies. ---- MB8800 Belled User Guide 1 Introduction MB8800 Belleds is a product that can make the LEDs blinking synchronously with the rhythm of your music which is in your mobile. Just install the application called belleds in your mobile. Then you can control the music play, the color of the LEDs by your mobile. 1.1 Verify Kit Contents MB8800 kit includes the following components. 1. MB8800 Router 2. Power Adaptor 3. LAN Cable 4. Audio Cable 1.2 Connection Make sure the device and the cables are connected correctly. 1. MB8800 Routers power line interface connects to Power Adaptor with the power line. 2. MB8800 Routers LAN interface connects to network interface of PC with the LAN cable. 3. MB8800 Routers Audio interface connects to audio interface of the earphones or speaker with the audio cable.

- 3 -

BELLNET Technologies. ---- MB8800 Belled User Guide 2 Configuration You can set the MB8800 Router WIFI related configuration in PC or mobile. The details are as below. 2.1 Configuration in PC 1. Connect your computer to MB8800 using the attached Ethernet cable and set your computer Obtain an IP address automatically. 2. Make sure that your computer has got IP address from the MB8800, then open the web browser and enter http://172.16.0.1(by default). Press Enter key, the MB8800 configuration home page will appear (Figure 2-1). 3. The default language is Chinese. You can click English on the top right corner. Then you will enter English interface (Figure 2-2). Figure 2-1 MB8800 configuration home page (Chinese)

- 4 -

Figure 2-2 MB8800 configuration home page (English) BELLNET Technologies. ---- MB8800 Belled User Guide

- 5 -

BELLNET Technologies. ---- MB8800 Belled User Guide 2.2 Configuration in detail 2.2.1 Music Service This function controls the renderer name in belleds.

(The belleds is one application in mobile that can make the led synchronize with the music.) Click Music Service, to enter the management page (Figure 2-3). Click Back, to go back to MB8800 configuration home page (Figure 2-2). Figure 2-3 Music Service screen You can change the Server Name:

1. Input the Server Name which you want in the field. (Figure 2-4) 2. Click Done (Figure 2-5), after 10 seconds it will pop-up a window (Figure 2-6):

3. Click Yes, and refresh the page. Then the Server Name has been changed successfully. (Figure 2-7)

- 6 -

Figure 2-4 Input the Server Name you want in field BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-5 Click Done

- 7 -

Figure 2-6 After 10 seconds, it will pop-up a window. BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-7 Click Yes, then refresh the page. Then Server Name is changed successfully.

- 8 -

BELLNET Technologies. ---- MB8800 Belled User Guide 2.2.2 Basic Settings In this function, you can change the MB8800 Routers WIFI SSID. Also, you can set the encryption mode and password for the WIFI. Click Basic Settings, to enter the management page (Figure 2-8). Click Back, to go back to MB8800 configuration main page (Figure 2-2). Figure 2-8 Basic Settings screen Currently:

The WIFI SSID is bellnet-r74. Encryption Mode is NONE (no encryption). You can change the Device Name (Known as WIFI SSID):

1. Input the Device Name which you want in the field. (Figure 2-9) 2. Click Done (Figure 2-10), after 20 seconds, it will pop-up a window (Figure 2-11):

Please refresh the page or reconnect your device. 3. Click Yes, and refresh the page. Then the Device Name has been changed successfully. (Figure 2-12)

- 9 -

Figure 2-9 Input the Device Name you want in field BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-10 Click Done

- 10 -

Figure 2-11 After 20 seconds, it will pop-up a window. BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-12 Click Yes, and refresh the page. The Device Name is changed successfully.

- 11 -

BELLNET Technologies. ---- MB8800 Belled User Guide In Security drop-down list, therere 4 encryption modes: (Figure 2-13) NONE; WPA; WPA2; WPA/WPA2. You can change the WIFI encryption mode:

1. Choose one encryption mode (e.g. WPA ) in Security drop-down list. 2. Input the Password, Confirm Password. (Figure 2-14).

(Please note: password should not be less than 8 characters.) 3. Click Done (Figure 2-15), after 20 seconds, it will pop-up a window (Figure 2-16):

Please refresh the page or reconnect your device. 4. Click Yes, and refresh the page. Then the security mode has been changed successfully. (Figure 2-17) Figure 2-13 Therere 4 encryption modes:

- 12 -

Figure 2-14 Input the Password & Confirm Password BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-15 Click Done

- 13 -

Figure 2-16 After 20 seconds, it will pop-up a window. BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-17 Click Yes, and refresh the page. The security mode is changed successfully.

- 14 -

BELLNET Technologies. ---- MB8800 Belled User Guide 2.2.3 Internet Connection This function can make MB8800 Router connect to other WIFIs. It will search all the nearby WIFI SSIDs. You can connect to the nearby WIFI SSID:

1. Click Internet Connection, to enter the screen (Figure 2-18). By default, the wireless access is ON. You can click OFF to close wireless access. Please note: The page needs some time to search the nearby WIFI SSIDs. 2. After a few seconds, it will display the nearby WIFI SSIDs (Figure 2-19). 3. Click the SSID which you want to connect to (For example: Xiaomi_ADF1). Then it will pop-up a window to let you input the password for the SSID (Figure 2-20). 4. Input the password of the SSID, then click OK (Figure 2-21).

(If you dont want to connect, then click Cancel.) 5. After 25 seconds (Figure 2-22), it will scan the SSIDs again (Figure 2-23). 6. After a few seconds, it displays all the nearby SSIDs again. Refresh the page, then youll see page (Figure 2-24). Connect successfully.

- 15 -

Figure 2-18 Scanning the nearby WIFI SSIDs BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-19 The nearby WIFI SSIDs

- 16 -

Figure 2-20 Click Xiaomi_ADF1, it will pop-up a window. BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-21 Input the WIFI password of Xiaomi_ADF1

- 17 -

Figure 2-22 Wait for 25 seconds BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-23 Scanning for nearby WIFI SSIDs again

- 18 -

BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-24 After a few seconds, MB8800 displays all the nearby SSIDs again. Refresh the page, then youll see Xiaomi_ADF1 Connect successfully.

- 19 -

BELLNET Technologies. ---- MB8800 Belled User Guide 2.2.4 Upgrade Firmware You can upgrade the MB8800s firmware in this function:

1. Click Upgrade Firmware, to enter the screen (Figure 2-25).

(If you dont want to upgrade firmware, you can click Back to go back to configuration main page.) 2. Click Browse. It will pop-up a window to let you select the firmware file in PC. Choose the firmware file which you want to upgrade. (Figure 2-26) 3. Click Open, you can see the selected firmware file on page. (Figure 2-27) 4. Click Upgrade Firmware. It will pop-up a window: File uploaded success! Continue to upgrade? (Figure 2-28). 5. Click Yes, to proceed the upgrading. (Figure 2-29). If you want to quit the upgrading, click (Cancel). 6. When the process is 100%, refresh the page. (Figure 2-30). The new firmware has been upgraded successfully.

- 20 -

Figure 2-25 Upgrade Firmware screen BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-26 Select the firmware file in PC

- 21 -

Figure 2-27 You can see the selected firmware file on page. BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-28 Click Upgrade Firmware, it will pop-up a window.

- 22 -

Figure 2-29 Click Yes, upgrade will proceed. BELLNET Technologies. ---- MB8800 Belled User Guide

- 23 -

BELLNET Technologies. ---- MB8800 Belled User Guide Figure 2-30 When process is 100%, refresh the page. New Firmware has been upgraded.

- 24 -

BELLNET Technologies. ---- MB8800 Belled User Guide 3 Belleds in mobile In this section, well introduce how to use the belleds application in mobile. 3.1 Preparation (Hardware & Software) Hardware:

1. Make sure you have connected the cables (Refer to 1.2 Connection, Page 3). 2. Make sure you have twisted the LEDs and power on. Software:

1. Make sure in mobile WLAN: (Figure 3-1). You have connected to WIFI SSID (Known as the Device Name): belled-r74.

(Device Name is set in Basic Settings of MB8800 Configuration home page, Refer to 2.2.2 Basic Settings, Page 9) 2. Install the application of belleds in your mobile (for Android System). 3. Click the logo of belleds in your mobile, to enter MB8800 belled mobile interface

(Figure 3-2).

- 25 -

Figure 3-1 In mobile WLAN: Connect to Device Name: belled-r74 BELLNET Technologies. ---- MB8800 Belled User Guide Figure 3-2 MB8800 belled mobile interface

- 26 -

BELLNET Technologies. ---- MB8800 Belled User Guide 3.2 Configuration in Mobile

, to enter the MB8800 configuration home page (Figure 3-3). Click the logo It is same as the configuration page in PC.

(Refer to 2.2 Configuration in detail, Page 6) Figure 3-3 MB8800 configuration home page in mobile

- 27 -

BELLNET Technologies. ---- MB8800 Belled User Guide 3.3 Play Music 3.3.1 Music List

, to enter the belleds music list. (Figure 3-4) Click the logo It displays the Music List in your mobile. Figure 3-4 belleds music list

- 28 -

BELLNET Technologies. ---- MB8800 Belled User Guide 3.3.2 Music Play 1. Music Play Page Click one song in Music List to play, to enter the music play page (Figure 3-5). At the same time, the song you selected is playing. Figure 3-5 belleds music play page means play the music. means music pause. means stop the music. means search the renderers in your mobile (such as MB8800, BubbleUPnP).

(Figure 3-6). means you can select the other music in mobile. Click it, it will pop-up a window to let you find your music (Figure 3-7). If you choose one new song, then it will be moved to now playing music list. Click

, it will play the song you selected.

- 29 -

BELLNET Technologies. ---- MB8800 Belled User Guide Figure 3-6 Click

, it will search the renderers in your mobile. Figure 3-7 Click

, pop-up a window to let you find your music in mobile.

- 30 -

BELLNET Technologies. ---- MB8800 Belled User Guide 2. Play on Local/Remote Device Click Renderer Name to control the playing on local/remote device.

(Please Note: MB8800 Renderer Name is the Server Name. Refer to 2.2.1 Music Service, Page 6) Play on Local Device means music is playing from mobile itself. Play on Remote Device means music is playing from remote device (earphones or speakers which have been connected to MB8800 by audio cables). For example:

Current MB8800 Renderer Name is bellnet-a02dd7. Click bellnet-a02dd7, music will play on local device. (Figure 3-8) Click bellnet-a02dd7 again, music will play on remote device. (Figure 3-9) If you click it the third time, then music will play on local device again. It is circulating. Figure 3-8 Play on Local Device

- 31 -

Figure 3-9 Play on Remote Device BELLNET Technologies. ---- MB8800 Belled User Guide 3.3.3 Music & LEDs synchronize Once the music is playing, you will see the LEDs are blinking synchronously with the rhythm of your music which is in your mobile. Music and LEDs are synchronous. The music play, LEDs will blink synchronously with the rhythm. The music pause/stop, LED will stop changing color (stay in one color).

- 32 -

BELLNET Technologies. ---- MB8800 Belled User Guide 3.4 LED control

, to enter the LED control interface. (Figure 3-10) Click the logo Figure 3-10 LED control interface

- 33 -

BELLNET Technologies. ---- MB8800 Belled User Guide 3.4.1 ON and OFF By default, the LEDs status is on. Click off, the LEDs will be turned off. Click on , the LEDs will be turned on. 3.4.2 Adjust Color of LEDs Slide the little circle

, to adjust the color of LEDs. (Figure 3-11) Therere hundreds of colors you can choose. Figure 3-11 Slide the little circle

, to adjust the color of LEDs.

- 34 -

BELLNET Technologies. ---- MB8800 Belled User Guide FCC IC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

- 35 -

		frequency	equipment class	purpose
1	2014-10-20	2462 ~ 2462	DXX - Part 15 Low Power Communication Device Transmitter	Original Equipment
2		2422 ~ 2452	DTS - Digital Transmission System

Application Forms

app s	Applicant Information
1 2	Effective	2014-10-20
1 2	Applicant's complete, legal business name	Bellnet Technologies Co.,Ltd
1 2	FCC Registration Number (FRN)	0022299812
1 2	Physical Address	51 Zhujiang Road,New District,Wuxi
1 2		Wuxi, N/A 214000
1 2		China

app s	TCB Information
1 2	TCB Application Email Address	b******@phoenix-testlab.de
1 2	TCB Scope	A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	RLI
1 2	Equipment Product Code	MB8800

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	J**** Y**
1 2	Title	Product Manager
1 2	Telephone Number	(86)5******** Extension:
1 2	Fax Number	8102********
1 2	E-mail	y******@bellnett.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	DXX - Part 15 Low Power Communication Device Transmitter
1 2	Equipment Class	DTS - Digital Transmission System
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	2.4G+WiFi Smart Router
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Does not apply
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Output Power listed is peak conducted. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 and 40MHz BW modes.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	Shenzhen LCS Compliance Testing Laboratory Ltd.
1 2	Name	G**** L******
1 2	Telephone Number	86-07******** Extension:
1 2	Fax Number	86-07********
1 2	E-mail	G******@lcs-cert.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	2462.00000000	2462.00000000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C	CC	2412	2462	0.0192
2	2	15C	CC	2422	2452	0.0097

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: A3LBE201D Samsung Electronics Co Ltd EWQ500GTB Itron Inc PD9BE201D2 Intel Corporation O551753824 SWAGTEK 2AOFDL-NLEUB37 Zhejiang Lierda Internet of Things Technology Co., Ltd.