FCC ID: QI3BIL-2090AC BEC 2090AC

QUICK INSTALL GUIDE Model: BEC 2090AC HARDWARE OVERVIEW & LEDS WHATS IN THE BOX 1 x BEC 2090AC 1 x This Quick Install Guide 1 x Ethernet (RJ-45) Cable 9 10 7 6 1-5 8 11 12 13 1. Power LED 2. WAN / LAN LED 3. LAN LED 4. Wi-Fi 2.4G Signal LED 5. Wi-Fi 5G Signal LED 6. Wi-Fi Signal Strength LED 7. WPS Button 8. Wi-Fi Antenna x 2 9. WAN / LAN Port 10. LAN Port 11. RESEST Button 12. Power On/Off Switch 13. Wi-Fi Mode Switch

(AP/Repeater / Router) LED DESCRIPTION 1 1 2 3 4 5 2 6 LED 1. Power 2. WAN / LAN 3. LAN 4. Wi-Fi 2.4G 5. Wi-Fi 5G 6. Wi-Fi Signal Strength Indicator STATUS Green Off Green Off Green Blinking Off DESCRIPTIONS System is up and ready Power off Ethernet cable is detected. Transmission speed is at 10/100Mbps Ethernet cable is not being detected Wireless connection to 2.4G / 5G network is established Data being transmitted / received Excellent reception with main router. Signal strength above 75%

Good reception with main router. Signal strength 50% - 75%

Weak reception with main router. Signal strength below 25%

No Wi-Fi connection with any router SETUP OPTIONS WPS Option 1 (WPS Connection): Press the WPS button to establish Wi-Fi connection with your primary router. Make sure your router supports WPS. 4 Option 2 (Web GUI / Phone UI Configuration): Use Web Browser (Web UI) or mobile phone (Phone UI) to configure and setup the device.

:

Option 2 Using Web GUI / Phone UI (Repeater Mode) Power on Plug in the BEC 2090AC to an electric outlet near your primary router. Connect to the BEC 2090AC For Windows Users For Mac OS X Users Wait for the POWER, 2.4G and 5G LEDs turn solid green. Connections are available Wireless Network Connection BEC_2090AC_2.4G Connect automatically Connect MyHome Wi-Fi: On Turn Wi-Fi Off BEC_2090AC_2.4G MyHome Join Other Network... Create Network... Open Network Preferences... 1 Unplug the Ethernet cable from your computer (if any). 2. Click the Wi-Fi icon on the taskbar and connect to the BEC 2090AC Wi-Fi network, look for SSID:

BEC_2090AC_2.4G or BEC_2090AC_5G. Then enter Wi-Fi Key 12345678 1 Unplug the Ethernet cable from your Mac (if any). 2. Click the Wi-Fi icon on the taskbar and connect to the BEC 2090AC Wi-Fi network, look for SSID:

BEC_2090AC_2.4G or BEC_2090AC_5G. Then enter Wi-Fi Key 12345678 Connecting to the Internet 1 Launch a web browser and type http://192.168.68.1 in the address bar. Enter admin (all lowercase) for both Username and Password, and then click Login. http://192.168.68.1 Language:

English Username:

admin Password:

Cancel Login If the login window does not pop up, please refer to FAQ Q1. 2 The Home GUI of the BEC 2090AC looks like the following screen. Click on Repeater Wizard to connect with your primary home router. 3 4 Repeater Wizard will display a list of all available Access Points for selection. A. Select the SSID, access point, of your primary router. B. Wireless Security - enter the same wireless key used on the primary router. C. Assign a new SSIDs of the 2090AC if desired. Default will use SSID of the router + -2.4G or 5G + -ext. Example: wlan-ap-5G-ext & wlan-ap-2.4G-ext. Click the Save button to save settings. The BEC 2090AC will automatically restart itself without warning. This process may take within a minute. The new settings will not take effect after the restart. After the restart has completed, you may remove and install the BEC 2090AC at the desired location. 5 Check the Wi-Fi Signal Strength LED, if you see a solid green light then you have connected with your primary router successfully. Otherwise, please check with your setup again. The WiFi Signal Strength Indicator LED should turn on and stay solid green. If not, please refer to FQA #3. Option 1 Using WPS (Wi-Fi Protected Setup) Device Setup Plug in the BEC 2090AC to an electric outlet near your primary router. Wi-Fi Connection Setup 1. Press the WPS button on your primary router. Wait for the POWER, 2.4G and 5G LEDs turn solid green. 2. Press the button on the BEC 2090AC until you see the light flashes. The Wi-Fi signal strength indicator LED should turn green solid. If not, please use Option 2, web GUI, to configure the 2090AC again. Enjoy!

The 2090AC network shares the same Wi-Fi password as the primary router/network but with different SSID. To change the SSID of the 2090AC, please refer to Step 3 (Connecting to the Internet) for details. FAQ (Frequently Asked Questions) Relocation of the 2090AC 1 Plug in the BEC 2090AC about halfway between your primary router and the Wi-Fi dead/weak spot. The location you choose must be within the range of the host network. Wait until the LEDs are lit. Make sure the BEC 2090AC is in a location with 2-3 bars lit. If not, relocate the 2090AC closer to the primary router to achieve better signal quality. 2 If WPS function is not supported on your primary router or WPS method fails to connect, please try with Option 2 using web GUI or phone UI to connect BEC 2090AC with your router. Q1: What should I do i f my router does not have a WPS button?

ANS: Please follow instructions Option 2 on how to set up using the browser. Q2: How to restore the BEC 2090AC to its default settings?

ANS: While the power is still on, keep pressing the reset button on the right side of the product for 5 to 10 seconds, and it will restore to factory settings. Q4: My signal from the range extender is weak, and keeps dropping o ff. ANS: Please place the extender in a proper location, i.e. where a minimum of 3 router signal strength bar is shown (please check the signal strength of that specific location with your phone or PC) If you have other inquiries or need further technical support, please contact with your Internet Service Provider or visit us at www.bectechnologies.net Host Network Extended Network Primary Router or Clients 3 bars

(Full bars) 2 bars Q3: Why cannot I see the login page after entering http://192.168.68.1 in the browser?

ANS: Make sure your PC or phone is connected to the extender network and has disconnected from any other network. Also please make sure your PC or phone is set to obtain an IP address automatically. 3301 Matrix Drive Ste 200. Richardson, TX 75082 USA | TEL : +1-972-422-0877 | FAX : +1-972-422-0886 | E-mail : sales@bectechnologies.net v1.0 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. For Remote control The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Caution:

(i) The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the EIRP limits specified for point-to-point and non-point-to-point operation as appropriate;

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: QI3BIL-2090AC Label and Location This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Label Location Label Location Size: L: 2.9cm W:2.5cm Size: L: 3.0W:2.0m This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

(Billion Electric Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: QI3BIL-2090AC Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram, Schematics, Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Sincerely, File Name Block Diagram.pdf, Schematics.pdf, Operational Description.pdf

(Signed) Name / Title: Ted Ho/PM Manager Company: Billion Electric Co., Ltd. Address: 8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist, New Taipei City 23146, Taiwan Tel: +886-2-29145665 Fax: 886-2-2918-2895 E-Mail: christina@billion.coim Rev 11/20/07

Billion Electric Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: April 02, 2019 SUBJECT: FCC Application for (QI3BIL-2090AC) To Whom It May Concern:

We, the undersigned, hereby authorize Gavin Liang at Shenzhen LCS Compliance Testing Laboratory Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen LCS Compliance Testing Laboratory Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(Signed) Name / Title: Ted Ho/PM Manager Company: Billion Electric Co., Ltd. Address: 8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist, New Taipei City 23146, Taiwan Tel: +886-2-29145665 Fax: 886-2-2918-2895 E-Mail: christina@billion.coim F:\\\A181207025-LCS181217159AE-Billion Electric Co., Ltd.--BEC 2090AC-FCCID---\

\POA_Letter_140225.docx

WIFI Channel 12 and 13 Declaration Letter WiFi Channel 12&13 Declaration Letter Page 1 of 2 Rev.1.0 Surf Communication Solutions Ltd. WIFI Channel 12 and 13Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: QI3BIL-2090AC Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Sincerely, Clients signature :

Name / Title: Ted Ho/PM Manager Company: Billion Electric Co., Ltd. Address: 8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist, New Taipei City 23146, Taiwan Tel: +886-2-29145665 Fax: 886-2-2918-2895 E-Mail: christina@billion.coim WiFi Channel 12&13 Declaration Letter Page 2 of 2 Rev.1.0

8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist, New Taipei City 23146, Taiwan Billion Electric Co., Ltd. UNII Device Declaration Letter Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: QI3BIL-2090AC

(1) DFS Device:

Master N/A Client with Radar detection capability Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) passive scanning Ad Hoc Mode capability Access point capability Active Scanning

(the device can transmit a probe

(beacon)) Yes Yes Yes Yes Yes Yes No No No No No No

(where the device is can listen only with no probes) Yes Yes Yes Yes Yes Yes No No No No No No 5180-5240 5190-5230 5210-5210 5745-5825 5755-5795 5775-5775

(3) Country code selection ability Yes No If yes, pls explain how it was implemented:

Yes Yes Yes Yes Yes Yes No No No No No No Yes Yes Yes Yes Yes Yes No No No No No No

(4) Meet 15.202 requirement Yes No pls check below :

A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes

(active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and /

or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply 8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist, New Taipei City 23146, Taiwan Billion Electric Co., Ltd.

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name / Title: Ted Ho/PM Manager Company: Billion Electric Co., Ltd. Address: 8F, No. 192, Sec. 2, Zhongxing Road, Xindian Dist, New Taipei City 23146, Taiwan Tel: +886-2-29145665 Fax: 886-2-2918-2895 E-Mail: christina@billion.coim