WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/4503947.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case FCC ID: QI3BEC-CBRS6 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch October 31, 2019 Dear Application Examiner, BILLION ELECTRIC CO., LTD., BEC CBRS-6, FCC ID: QI3BEC-CBRS6 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of KDB996369 have been met and shown on the following statements. 1. The modular transmitter must have its own RF shielding. The radio portion of this module has been shielded, please see exhibition External Photo. 2. The modular transmitter must have buffered modulation/data inputs. The EUT has buffered data inputs, it is integrated in chip MT7525G. 3. The modular transmitter must have its own power supply regulation. The part number of this regulator is MT7525G. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C). Not applicable, this product is a license band module, however, a unique antenna connector is provided as shown in the EUT photos and test report. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration via Convertible Board. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. The modular transmitter must be labeled with its own FCC ID number. Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. Report No.: RF190610E05, RF190610E05-1, RF190610E05-2, RF190610E05-3, RF190610E05-4, RF190610E05-5, SA190610E05 FCC ID: QI3BEC-CBRS6 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Andrea Hsia Supervisor Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch Address: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Tel: +886-3-318-3232 #4311628, Direct: +886-3-2600628 eMail: andrea.hsia@tw.bureauveritas.com; Skype: whs9681 Report No.: RF190610E05, RF190610E05-1, RF190610E05-2, RF190610E05-3, RF190610E05-4, RF190610E05-5, SA190610E05