FCC ID: VLJ-MH003T Boom2/Boom2+

EN AT A GLANCE the important bits, quick and easy Volume Up Button Charge

(Micro USB) Call Button Press to answer/

end call. Boom open - on EN Microphone Charging Status Light:

Blue Fully charged Red charging Volume Down Button MOTOROLA BOOM2 MOTOROLA BOOM2+

Wear Ear Hook Earpiece CHARGE IT lets get you up and running To charge your headset, plug the USB cable into the headset's micro USB port and connect to USB power source. Note: Fully charge the headset before you use it. Tip:

youre not using it. Caution: Your battery is designed to last the life of your device. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage the device, void your warranty, and could cause injury. CONNECT & GO lets get you connected EASYPAIRTM METHOD Turn on Bluetooth on your device. Turn on your headset and follow the voice prompts. Go to the Bluetooth menu on your device to pair & connect with the headset. When the device and headset connect, youll hear pairing complete. 1 2 EN EN 3 4 EN COMFORT what feels best on you EAR HOOK right or left use EAR TIP (NO HOOK) Attach ear tip On-Ear Right Ear Left Ear Wear Wear BASICS standard features, advanced quality answer a call Press the Call button. CALLS To reject a call call redial last call mute or unmute a call Press and hold the Volume Up or Volume Down button until you hear a tone. Press the Call button to activate voice recognition.

(phone dependent) Press and hold the Call button 2 seconds until you hear a tone. Press and hold the Volume Up and Volume Down buttons together until you hear mute on or

. To end a call Press the Call button change call volume Press the Volume Up or Volume answer a second incoming call reject a second call volume, press and hold the Volume Up or Volume Down button. Press the Call button. Press and hold the Volume Up or Volume Down button until you hear a tone. Notes:

Using a mobile device or accessory while driving may cause distraction and may be illegal. Always obey the laws and drive safely. your headset is power on power off pairing mode STATUS LIGHT If light shows three blue flashes three red flashes rapid blue/red flashes rapid blue/purple flashes short blue flash connection successfully incoming/outgoing call on phone 1 EN 5 6 EN EN 7 8 EN EN 9 If light shows your headset is slow blue pulse on a call slow blue flash on standby slow red flash on a call (call muted) short blue/red flash attempting to connect short red flash low battery Note:

1 Headset will automatically turns off if no connection with phone after 5 minutes. 2 After paired to the mobile phone, headset will enter sleep mode when boom is closed (headset switches off) and bluetooth of phone stays on. If a call is come, you can pick it up by simply opening the boom (switch on the headset). It will automatically connect and pick call. 3 Closing the Boom saves battery life. ADVANCED CALLER ID SECOND DEVICE Do you use two phones? Or maybe a phone and a tablet? Connect with both of them. 1 2 CONNECT & GO on page 4). call from <number> on an incoming call. Note:

BATTERY READOUT When youre not in a call, press the Volume Up and Volume Down buttons together in standby mode to 3 Now pair the second device with your headset as normal. 4 Once paired, to connect with both devices simply turn them on. Youll hear phone connected as each device connects with your headset. Tip:

youre not using it. Note:

end call, just use the feature as normal and follow the voice prompts. Hubble ConnectTM for Motorola Hubble Connect for Motorola can greatly enhance your earbud experience. Download app for free at the App Store or Google PlayTM (AndroidTM 4.3 or higher).

Locate a lost earbud: Locate on a map the last time your earbud was connected to your device. Safety instructions for use moderate level. Avoid listening to music at loud volume levels for prolonged periods of time as this may cause permanent hearing damage or hearing loss. Your hearing is delicate and highly sensitive so please listen to your music responsibly. For more information visit the Deafness Research Foundation www.drf.org Don't use Boom when it is unsafe to do so. For example, while operating a vehicle, cycling, crossing a road, or any activity which requires your attention and ability to hear. You should be aware of your surroundings and use Boom responsibly. Help & more

Get help: Visit www.motorolahome.com/support

Find accessories at: www.motorolahome.com Note: If youre watching video while using your earbuds, your audio may be slightly out of sync with your video. Manufactured, distributed, or sold by Binatone Electronics property of their respective owners. 2016 Motorola Mobility LLC. All rights reserved. This device contains licence-exempt transmitter(s)/receiv-

er(s) that comply withInnovation, Science and Economic DevelopmentCanadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1)This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS102 radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR102 tablies pour un environnement non contrl. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician forhelp. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 10 EN EN 11 12 EN EN 13 US Binatone 77-007-01530 H715M/H715M+/H715M+

Motorola

65*80MM;80G; 15P 1.0 Boom2/Boom2+/Boom2+

mm(1:1) 2019-04-17

8MM 3.5MM 11.3MM 20.6MM IC: 4522A-MH003T FCC ID: VLJ-MH003T Model: MH003T MADE IN CHINA Manufactured by Binatone Telecom Plc,1 Apsley Way London NW2 7HF 718019C000001 Binatone

77-007-*****

H715M/H715M+/H715M+

Motorola

1.1 1.2ACCA CC Boom2/Boom2+/Boom2+

mm(1:1) 2019-02-19

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Binatone Electronics International Ltd. Floor 23A, 9 Des Voeux Road West, Sheung Wan Hong Kong China Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Karl Heinz Mueller VLJ VLJ-MH003T paultsui@binatonetelecom.com.hk 852-28027388 a) b) c) d) e) I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 2020-5-25 Print Name:

Title:

Karl Heinz Mueller Chief Technical Officer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Date: 2019-5-13 To:

Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: Binatone Electronics International Ltd. Floor 23A, 9 Des Voeux Road West, Sheung Wan Hong Kong China Regarding: Confidentiality Request regarding application for FCC /D: VLU-MH003T LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Karl Heinz Mueller Title: Chief Technical Officer Signature:

On behalf of Company: Binatone Electronics International Ltd. Telephone: 852-28027388 E-mail: paultsui@binatonetelecom.com.hk

Binatone Electronics International Ltd. Date: 2019-5-13 FO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: VLJ-MH003T To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Binatone Electronics International Ltd. This authorization is valid until further written notice from the applicant. Print Name: Karl Heinz Mueller Title: Chief Technical Officer Signature oe On behalf of Company: Binatone sein r nn Ltd. Telephone: 852-28027388 E-mail: paultsui@binatonetelecom.com.hk