Remote Keyless Entry
(HM-T011) MOBIS Co., Ltd.
#80-9,MABOOK-RI, GUSEONG-EUP, YONGIN-SHI, GYUNGGI,449-910,KOREA
- INDEX -
- An outline
- Description of Transmitter
- Regulatory Information An outline of Transmitter 1. How to use HM-T011
- HM-T011 is Remote Keyless System.
- This unit controll door lock, unlock, panic, tail gate unlock/glass open with wireless.
- This unit consist of Transmitter(HM-T011)
- Lock button push , then door lock.
- Unlock button push, then door unlock.
- Tail Gate Unlock/Glass Open button push, then tail gate or tail gate glass unlock.
- Panic button push, then Panic 2. Introduction of Transmitter(HM-T011)
- Transmitter has four button
- Button marking are LOCK, UNLOCK, TAIL GATE UNLOCK/GLASS OPEN, PANIC
- Transmitter use thee voltage battery
- Freqency is 315Mhz
- Modulation item is SAW Resonator
- Transmitter use Rolling code algorithm Description of Transmitter 1. PRIMARY FUNTION
- Remote door lock/unlock
- Remote tail gate unlock/glass open, panic
- LED turn on ( When button is pushed )
- Operating distance :10 m over
- Id input(setting mode) 2. ELECTRICAL CHARACTERISTICS TRANSMITTER model name Operating voltage 3 V DC Consumption current Max 15mA Operating frequency 315 Power Sensitivity 10mW under
Operating temperature
-20 ~ +60 ETC FM modulation 3. DESCRIPTION MODE 1) Mode Mode ID INPUT
(Setting Mode) Normal Mode B+
KEYLESS ACC IG ON
SETTING use equipment 2) Id input(Setting Mode) ON OFF OFF OFF OFF When Setting Mode, lock button push, 4. OPERATING DIAGRAM 1) TRANSMITTER A) DATA FRAME B) DATA FORMAT LOGIC "0"
LOGIC "1"
C) TRANSMISSION SPECIFICATION
- BAUD RATE : 625bps
- CODING METHOD : MANCHESTER
- TRANSMISSION BIT COUNT : 1 FRAME = 234BIT
- TRANSMISSION TIME : 377.4msec Regulatory Information THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES Operation is subject to the following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.