Bose SoundLink around-ear wireless headphones II Owners Guide Danish German Dutch Spanish Finnish French Italian Hungarian Norwegian Polish Swedish Thai Korean S. Chinese T. Chinese Japan Arabic Please read this owners guide carefully and keep for future reference. WARNINGS DONT use the headphones at a high volume for any extended period.
- To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
- Turn the volume down on your device before placing the headphones on your ears, then turn the volume up gradually until you reach a comfortable listening level. a danger to yourself or others. DONT use your headphones while driving or at any time the inability to hear outside surrounding sounds may present DO focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the head-
phones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals. DONT use mobile phone adapters to connect headphones to airplane seat jacks as this could result in personal injury such as burns or property damage due to overheating. Remove and disconnect immediately if you experience a warming sensation or loss of audio. DONT submerge or expose for extended period to water, or wear while participating in water sports, i.e. swimming, waterskiing, surfing, etc. Exposure to moisture may increase the risk of fire or electric shock. DONT use the headphones as aviation communication headsets except in case of emergency.
- No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
- Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
- The Bose SoundLink around-ear wireless headphones II are not engineered for noise conditions, altitude, tempera-
ture or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications. DONT place naked flame sources, such as lighted candles, near the product. DONT make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty. WARNING This product contains magnetic material. Contact your physician if you have questions on whether this might affect the operation of your implantable medical device. BATTERY WARNINGS The battery pack shall not be exposed to excessive heat such as sunshine, fire or the like. In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Batteries inside the product need to be charged before use. Always use the correct charger and refer to the manufac-
turers instructions or equipment manual for proper charging instructions. DONT attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Bose retailer or other qualified professional for removal. NOTE Use this product only with an agency approved power supply meeting local regulatory requirements (ex. UL, CSA, VDE, CCC). CLEANING The headphones do not require scheduled cleaning. Should cleaning be necessary, simply wipe the outside surfaces with a soft cloth. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Please dispose of used batteries properly, following local regulations. 2015 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without prior written permission. 2 - English Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Bose Corporation could void the users authority to operate this equipment. This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. It must not be co-located or be operating in conjunction with any other antenna or transmitter. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B) / NMB-3 (B) This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Temperature range:
Designed by Bose. Assembled in China. Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; 5 is 2005 or 2015. China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone EU Importer: Bose GP, Castleblayney Road, Carrickmacross, Ireland Taiwan Importer: Bose Taiwan Branch, Room 905, 9F, Worldwide House, 131 Min Sheng East Rd, Section 3, Taipei, Taiwan, 105 BC Operating: -4F to 113F (-20C to 45C) Charging: 41F and 104F (5C and 40C) Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Polybrominated Biphenyl X X O X X Hexavalent (CR(VI)) Lead (Pb) Mercury (Hg) Cadmium (Cd) Part Name PCBs Metal parts Plastic parts Speakers Cables This table is prepared in accordance with the provisions of SJ/T 11364. O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is below the limit require-
ment of GB/T 26572. X: Indicates that said hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572. O O O O O O O O O O O O O O O O O O O O
(PBB) Polybrominated diphenylether (PBDE) O O O O O The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license. English - 3 Important Safety Instructions Thank you .............................................................................................................. 5 Unpacking ............................................................................................................. 5 Headphone components .................................................................................... 6 Charging the battery ............................................................................................7 Battery indicator ...........................................................................................7 Selecting a language for voice prompts ...........................................................7 Turning voice prompts off/on ................................................................... 8 Pairing a mobile device ...................................................................................... 8 Pairing with NFC .................................................................................................. 9 Playing music ....................................................................................................... 9 Using the headphones with multiple devices ............................................... 9 Disconnecting a Bluetooth device .........................................................10 Reconnecting a previously connected device .......................................10 Scrolling through other paired devices ..................................................10 Clearing the headphone memory ............................................................10 Headphone controls...........................................................................................10 Headphone status indicators ............................................................................ 11 Battery charge level ..................................................................................... 11 Using the back-up audio cable ......................................................................... 11 Troubleshooting ................................................................................................. 12 Battery care ......................................................................................................... 13 Storage ................................................................................................................. 13 Cleaning ................................................................................................................ 13 Replacement parts and accessories ............................................................... 13 Customer service ................................................................................................ 14 Limited Warranty ................................................................................................ 14 Technical information ........................................................................................ 14 4 - English Contents Thank you We appreciate your choice of the Bose SoundLink around-ear wireless headphones II. These wireless stereo headphones combine the audio performance and comfort you expect from Bose with the freedom of wireless. Unpacking Check the carton for: headphones, carry case, USB charging cable, and back-up audio cable. Be sure to save all packing materials. They provide the safest means for any necessary shipping or transporting. If any part of the product appears to be damaged, do not attempt to use it. Contact your authorized Bose dealer immediately or call Bose Customer Service. For contact information, see Customer service on page 14. Bose SoundLink around-ear wireless headphones II Carry case USB charging cable Back-up audio cable English - 5 Introduction Headphone components A B C G F TM D E A Back-up audio cable connector B USB charging connector F E Near Field Communication
(NFC) touchpoint Power/Bluetooth button
(three-position) C Headphone controls D Microphone G Bluetooth and battery indicators 6 - English Introduction Charging the battery 1. Plug the small end of the USB cable into the micro-USB connector on the right earcup. 2. Plug the other end into a USB wall charger or computer that is powered on. Allow up to three hours to fully charge the battery. A full charge will power the headphones for up to 15 hours. A 15-minute partial charge will power the headphones for 2 hours. Note: The headphones will not play while charging. Battery indicator The battery indicator is located on the right earcup. While the battery is charging, the battery indicator glows amber. When the battery is fully charged, the indicator glows green. Note: While the headphone are in use, the battery indicator will blink red when the battery needs charging. See Headphone status indicators on page 11. Selecting a language for voice prompts The headphones feature voice prompts to guide you through the pairing and connecting processes. The voice prompts also indicate the battery charge level and the name of the currently connected device. When you turn on the headphones for the first time, the voice prompts will be heard in English. To select a different language:
1. Turn on the headphones and put them on your head. 2. Press and hold at the same time until you hear the voice prompt and for the first language option. English - 7 Operation 3. Press or to move through the list of language options:
English, Spanish, French, German, Mandarin, Japanese, Italian, Portuguese, Dutch, Russian, Polish When you hear your language, press and hold to select. 4. Turning voice prompts off/on If you prefer not to hear voice prompts, press and hold until you hear, Voice prompts off. Repeat to turn voice prompts back on. and at the same time Pairing a mobile device 1. Slide the Power/Bluetooth button symbol and hold until you hear, Ready to pair or you see the Bluetooth indicator blinking blue. all the way up to the 2. On your mobile device, make sure the Bluetooth feature is on.
(The Bluetooth menu is usually found in the Settings menu.) 3. Select Bose AE2 SoundLink from the device list. You will hear, Connected to <device name> or you will see the Bluetooth indicator glow solid white. Note: Refer to your mobile device owners guide to learn more about how it pairs/connects with other devices. 4. Repeat these steps to pair another device. 8 - English Operation Pairing with NFC If your device supports Near Field Communication (NFC), you can easily pair it with the headphones. 1. Turn the headphones power on. 2. Tap the NFC touchpoint on your mobile device to the center of the right earcup. Your device may ask you to accept pairing. Note: Before tapping your mobile device, make sure your device is unlocked and the Bluetooth and NFC features are both on. Refer to your mobile device users guide to learn more about these features. When the headphones are successfully connected, you will hear, Connected to <device name> or you will see the Bluetooth indicator glow solid white. 3. Repeat these steps to pair another device. Playing music Once your mobile device is connected, open a music app and start audio on your mobile device. You can play, pause, skip forward, skip backward, and adjust the volume using either the headphone controls or the device controls. See Headphone controls on page 10. Using the headphones with multiple devices The headphones can remember up to eight paired devices and can be actively connected to two devices at a time. When two devices are actively connected, you can play music from either device. To switch between connected devices, pause audio on the first device and play audio on the second. English - 9 Operation Disconnecting a Bluetooth device Turn off the Bluetooth feature on your device. If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to the center of the right earcup. Tap again to reconnect. Reconnecting a previously connected device When powered on, the headphones will automatically try to reconnect with the two most recently connected devices. Make sure the device(s) are within range and powered on. Scrolling through other paired devices To play music from a device in the headphone memory that is not currently connected:
1. Slide symbol and release to hear which device(s) all the way up to the are currently connected. 2. Within two seconds, slide to connect to the next paired device. all the way up to the symbol and release again 3. Repeat step 2 until you hear the correct device name. Note: To use this feature, voice prompts must be on. (See Turning voice prompts off/on on page 8.) Note: If a device is not within Bluetooth range (33 ft. or 10 m), scroll to the next device. Clearing the headphone memory To clear the headphone memory of all devices:
1. Slide all the way up to the hear Bluetooth device list cleared. symbol and hold for ten seconds, until you 2. Delete Bose AE2 SoundLink from the Bluetooth list on your mobile device. All Bluetooth devices are cleared and the headphones are ready to pair. Headphone controls The headphone controls are located on the side of the right earcup. Volume up Multi-function button Volume down Press once to play/pause or answer/end a call. Double press to skip forward. Triple press to skip backward. Press and hold to ignore an incoming call. 10 - English Operation Headphone status indicators The battery and Bluetooth indicators are located on the side of the right earcup. Green: Medium to full charge Amber: Low charge Red blinking: Need to charge Blue blinking: Ready to pair White blinking: Connecting White solid: Connected Battery charge level Each time you power on the headphones, the voice prompt will announce the headphone battery charge level. If you are connected to an iOS device, the device will display the headphone battery charge level near the upper right corner of the screen. Using the back-up audio cable Use the supplied back-up audio cable to connect a non-wireless device, or if the headphone battery is depleted. To use the audio cable:
1. Plug the audio cable into the connector on the left earcup. 2. Plug the audio cable into the connector on the device. Note: Make sure is in the off position when using the back-up audio cable. English - 11 Operation Troubleshooting Problem What to do Headphones do not turn on Headphones do not connect with mobile device Make sure Charge the battery. is in the on position. On your mobile device, turn off the Bluetooth feature and turn it back on. Then try pairing again. Delete Bose AE2 SoundLink from the Bluetooth list on your mo-
bile device. Then try pairing again. Move the mobile device closer to the headphones and away from any interference or obstructions. Try pairing another mobile device. Visit owners.Bose.com/SoundLinkAE2 to see how-to videos
(US and Canada only). Clear the headphone memory: Slide symbol and hold for ten seconds. Delete Bose AE2 SoundLink from the Bluetooth list on your mobile device. Then try pairing again. all the way up to the Headphones do not connect with NFC-
enabled device Make sure your mobile device supports NFC. Make sure your device is unlocked and the Bluetooth and NFC features are both on. No sound Make sure you are tapping the NFC touchpoint on the back of your mobile device to the center of the right earcup. Make sure the headphone power is on and battery is charged. Make sure the volume is turned up on the headphones and on your mobile device (or music app). Slide up and release to hear the name of the currently connected device. Try a different music app. Try pairing another mobile device. If two mobile devices are actively connected, make sure the other device has been paused first. If two mobile devices are actively connected, make sure both devices are within range of the headphones (30 ft. or 10 m). Poor sound quality Move the mobile device closer to the headphones, and away from any interference. Try pairing another mobile device. No audio from a device connected by audio cable Make sure the connected device is on and playing. Make sure the 3.5 mm plug is fully inserted into the headphones connector, and fully inserted into the audio source. Make sure Make sure the volume is turned up on the headphones and on your is in the off position. mobile device (or music app). Try connecting another device. Make sure the 3.5 mm plug is fully inserted into the headphones connector, and fully inserted into the audio source. Try connecting another device. Poor sound quality from a device connected by audio cable 12 - English Operation Battery care Be sure to turn off the headphones when not in use. Before storing the headphones for more than a few months, be sure the battery is fully charged. If the battery indicator begins to blink red while in use, the battery is low and you must charge the headphones now. Storage The earcups rotate for easy, convenient storage. Place the headphones flat into the case with the soft divider between the two earcups. Cleaning The headphones do not require scheduled cleaning. Should cleaning be necessary, simply wipe the outside surfaces with a soft, dry cloth. Do not allow moisture to get inside the earcups or the audio input connector. Do not use liquids or sprays. Replacement parts and accessories Replacement parts and accessories can be ordered through Bose Customer Service. See Customer service on page 14. English - 13 Care and Maintenance Customer service For questions about your headphones, contact your local Bose dealer. To contact Bose directly, visit: global.Bose.com US only: owners.Bose.com/SoundLinkAE2 Limited Warranty Your Bose SoundLink around-ear wireless headphones II are covered by a limited warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register. Failure to register will not affect your limited warranty rights. The warranty information provided with this product does not apply in Australia and New Zealand. See our website at www.bose.com.au/warranty or www.bose.co.nz/warranty for details of the Australia and New Zealand warranty. Technical information Battery:
Charging time:
Operating time:
Operating range:
Rechargeable, non-replaceable lithium-ion polymer 3 hours for full charge Up to 15 hours Up to 33 feet (10 m) from device 14 - English Care and Maintenance 2015 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM748270 Rev. 00