BRAVEN BRV-1s OWNERS GUIDE GET TO KNOW YOUR BRAVEN TURN ON & BLUETOOTH PAIRING VOLUME DOWN /
SKIP BACK (press and hold) POWER / PAIRING STATUS LIGHT BATTERY CHECK BUTTON BRAVEN CHARGING PORT BATTERY INDICATOR LIGHTS 20% - 40% - 60% - 80% - 100%
2 VOLUME UP /
SKIP TRACK (press and hold) POWER SWITCH PAIRING / ANSWER-END CALL /
PAUSE-RESUME MUSIC RESET BUTTON EXTERNAL USB CHARGING PORT 3.5 MM AUDIO-IN JACK 1. Press the Power button for 2-3 seconds to turn on your BRAVEN
(BRV-1s). Press the same button again for 2-3 seconds to turn your BRAVEN off. 2. Activate Bluetooth on the phone or device you are pairing with (see your devices instruction manual for information on activating its Bluetooth settings). 3. Press and hold the Play Button on your BRAVEN until you hear the BRAVEN pairing sound. 4. Go to your phone or devices Bluetooth settings and select BRAVEN BRV-1s from the list. 5. If asked for a passcode enter 0000 Your BRAVEN will remember the last 8 devices it has paired with. NOTE: If your BRAVEN does not have an active Bluetooth connection and is left on, it will shut itself off after 30 minutes. To restart your BRAVEN you will need to press and hold the power button for 2-3 seconds. 3 Full manual and troubleshooting: braven.com/manualsENG CHARGING YOUR BRAVEN CHARGING EXTERNAL DEVICES WATERPROOF FEATURES SPEAKERPHONE Before using your BRAVEN for the first time, charge the unit until all 5 Battery Capacity lights are solid (not flashing), indicating a full charge (typically 2 to 3 hours). Your BRAVEN is designed to charge USB devices that draw from 0.3A - 1A (most cell phones & mp3 players tablets and other 2A devices cannot be charged by your BRV-1s) using the full-sized USB port located behind the cap. To use external charging:
To charge your BRAVEN, plug the included USB-to-Micro-USB cable into a wall power adapter (not included) or into a powered USB port on a computer. Plug the Micro-USB connector end of the cable into the BRAVEN charging port. 1. Turn your BRAVEN on. 2. Plug the USB power cable that came with your phone, mp3 player, or other mobile device into the USB port on your BRAVEN. 3. Plug the other end of the cable into your mobile device, and it will immediately begin charging. The BRV-1s is IPX7 Waterproof, and is Press the Answer-End button on your designed to withstand rainfall, water jets, and water splashing. IMPORTANT - To ensure your BRAVEN BRV-1s speaker is prepared for use in a wet environment, remove all cable connections and tightly close the rear water cap. If the water cap is not properly closed, the BRV-1s will not be water resistant. BRAVEN to answer the call over the speaker. Press the Answer-End button again to end the call. 4 5 Full manual and troubleshooting: braven.com/manualsENG ONLINE: www.braven.com MANUAL: www.braven.com/manuals SUPPORT: www.braven.com/support EMAIL: support@braven.com PHONE: 1-877-9 BRAVEN (1-877-927-2836) TUTORIALS: www.braven.com/tutorials V1