FCC ID: ZL5S62PRO Rugged Smart Phone

 

1

Cat® S62 Pro

User Manual

PLEASE READ BEFORE FIRST USE SAFETY PRECAUTIONS

• Please read this manual and the recommended safety precautions carefully to ensure the correct use of this

device.

• If used in salt water, rinse the device afterwards, including the audio jack and the USB connector, to avoid

salt corrosion.

• Despite its rugged nature; avoid hitting, throwing, crushing, puncturing or bending the device.

• Do not switch on the device in a circumstance when it is prohibited to use devices, or when it may cause

interference or danger.

• Never use your device while driving.

• Always follow any device use rules in hospitals and health care facilities, and switch off near medical

apparatus.

• Switch off the device or activate aeroplane mode when in an aircraft, as it may cause interference to the

vessel’s control equipment.

• Switch off your device near high-precision electronic devices as it may affect their performance.

• Do not attempt to disassemble your device or its accessories; only qualified personnel should service or

repair it, if needed.

• Do not place the device or its accessories in containers with a strong electromagnetic field.

• Do not place magnetic storage media near the device. Radiation from the device may erase the information

stored on it.

• Do not use the device in an environment with flammable gas, such as a gas station, or put the device in a

high temperature place.

• Keep the device and its accessories away from young children. Do not allow children to use the device

without guidance.

• Only use approved chargers to avoid the risk of explosion.

• Observe any laws or regulations on the use of wireless devices, respecting others’ privacy and legal rights.

• For medical implant patients (heart, joints, etc), keep the device 15cm away from the implant and positioned

on the opposite side of the implant.

• Strictly follow the relevant instructions of this manual while using the USB cable, otherwise your device or PC

may be damaged.

• The full text of the safety instruction is available at the following internet address:

https://www.catphones.com/support/

2

LEGAL NOTICE

© 2020 Caterpillar. All Rights Reserved.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, "Caterpillar Yellow", the "Power Edge" and Cat

“Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar

and may not be used without permission.

Bullitt Mobile Ltd. is a licensee of Caterpillar Inc.

Bullitt Mobile Ltd.’s and third-party trademarks are the property of their respective owners.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Caterpillar Inc.

The product described in this manual may include copyrighted software and possible licensors. Customers

shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse

engineer, lease, assign, or sublicence the said software or hardware, unless such restrictions are prohibited by

applicable laws or such actions are approved by respective copyright holders under licences.

The contents of this manual are provided “as is”. Except as required by applicable laws, no warranties of any

kind, either express or implied, including but not limited to the implied warranties of merchantability and

fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this manual.

To the maximum extent permitted by applicable law, in no case shall the manufacturer be liable for any

special, incidental, indirect, or consequential damages, or lost profits, business, revenue, data, goodwill or

anticipated savings.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use

of such marks by Bullitt Group Ltd is under licence. All other third-party trademarks and trade names are those

of their respective owners.

Google, Android, Google Play and other marks are trademarks of Google LLC.

NOTICE

Some features of the product and its accessories described herein rely on the software installed, capacities and

settings of local network, and may not be activated or may be limited by local network operators or network

service providers. Therefore, the descriptions in this manual may not exactly match the purchased product or

its accessories.

The manufacturer reserves the right to change or modify any information or specifications contained in this

manual without prior notice or obligation.

3

The manufacturer is not responsible for the legitimacy and quality of any products that you upload or

download through this device including text, pictures, music, movies, and non-built-in software with copyright

protection. Any consequences arising from the installation or usage of the preceding products on this device is

accountable to you.

IMPORT AND EXPORT REGULATIONS

Customers shall comply with all applicable export or import laws and regulations. Customers must obtain all

necessary governmental permits and licences to export, re-export or import the product mentioned in this

manual including the software and technical data.

4

CONTENTS

WELCOME TO THE CAT® S62 Pro ...................................................................................................................... 7

RUGGED CREDENTIALS .................................................................................................................................... 7

WHAT’S IN THE BOX......................................................................................................................................... 7

KEY FUNCTIONS ............................................................................................................................................... 8

GETTING STARTED ........................................................................................................................................... 9

INSTALLING SIM CARD(S) AND MEMORY CARD ................................................................................................. 9

CHARGING THE BATTERY ............................................................................................................................... 10

IMPORTANT INFORMATION REGARDING FUTURE USE OF THE BATTERY ....................................................... 10

POWERING YOUR DEVICE ON/OFF ................................................................................................................. 10

TOUCHSCREEN ............................................................................................................................................... 11

HOME SCREEN ............................................................................................................................................... 11

LOCKING AND UNLOCKING THE SCREEN ........................................................................................................ 11

LOCKING THE SCREEN ...................................................................................................................................... 11

UNLOCKING THE PHONE .................................................................................................................................. 11

DISPLAY ......................................................................................................................................................... 12

DISPLAY LAYOUT .............................................................................................................................................. 12

NOTIFICATIONS AND STATUS INFORMATION .................................................................................................. 12

NOTIFICATION PANEL .................................................................................................................................... 13

SHORTCUT ICONS .......................................................................................................................................... 13

WIDGETS ....................................................................................................................................................... 14

FOLDERS ........................................................................................................................................................ 14

WALLPAPERS ................................................................................................................................................. 14

TRANSFERRING MEDIA TO AND FROM YOUR DEVICE .................................................................................... 14

USING FLIGHT MODE ..................................................................................................................................... 15

MAKING A PHONE CALL ................................................................................................................................. 15

CONTACTS ..................................................................................................................................................... 16

USING THE ON-SCREEN KEYBOARD ................................................................................................................ 18

DISPLAYING THE KEYBOARD PANEL ................................................................................................................. 18

USING THE LANDSCAPE KEYBOARD ................................................................................................................. 18

CUSTOMISING YOUR KEYBOARD SETTINGS ..................................................................................................... 18

WI-FI® ............................................................................................................................................................ 18

SMS AND MMS .............................................................................................................................................. 19

BLUETOOTH® ................................................................................................................................................. 20

TAKING PHOTOS AND RECORDING VIDEOS ................................................................................................... 21

USING THE THERMAL CAMERA ..................................................................................................................... 23

ENJOYING MUSIC ........................................................................................................................................... 26

USING GOOGLE PLAY ..................................................................................................................................... 26

5

SYNCHRONISING INFORMATION ................................................................................................................... 28

USING OTHER APPS ....................................................................................................................................... 30

MANAGING THE DEVICE ................................................................................................................................ 31

SETTING THE DATE AND TIME .......................................................................................................................... 31

PERSONALISING THE DISPLAY ........................................................................................................................ 32

SETTING YOUR RINGTONE ............................................................................................................................. 32

SETTING PHONE SERVICES ............................................................................................................................. 33

USING NFC ..................................................................................................................................................... 33

PROTECTING THE DEVICE ............................................................................................................................... 34

MANAGING APPS........................................................................................................................................... 34

RESETTING THE DEVICE .................................................................................................................................. 35

APPENDIX ...................................................................................................................................................... 35

VIEWING THE E-LABEL ...................................................................................................................................... 36

PREVENTION OF HEARING LOSS....................................................................................................................... 36

HEARING AID COMPATIBILITY (HAC) ................................................................................................................ 36

EMERGENCY CALL ............................................................................................................................................ 37

CE SAR COMPLIANCE ........................................................................................................................................ 37

FCC REGULATION ............................................................................................................................................. 37

RF EXPOSURE INFORMATION (SAR) ................................................................................................................. 38

INDUSTRY CANADA STATEMENT ...................................................................................................................... 39

DISPOSAL AND RECYCLING INFORMATION ...................................................................................................... 40

REDUCTION OF HAZARDOUS SUBSTANCES ...................................................................................................... 40

EU REGULATORY CONFORMANCE ................................................................................................................... 40

EU COMPLIANCE STATEMENT .......................................................................................................................... 41

SPECTRUM AND POWER TABLE (EU Variant Only) ........................................................................................... 41

CAT® S62 Pro SPECIFICATION ........................................................................................................................... 42

6

WELCOME TO THE CAT® S62 Pro

Introducing the Cat S62 Pro, the pinnacle of innovation, elegant design and rugged durability.

Our third generation of the Cat 60 series has the best integrated thermal camera available in a smartphone.

Highly sensitive to minute temperature differences and with substantial improvements to the thermal image

quality and clarity, the S62 Pro offers significant new enhancements. Use it to discover more about the world

around you, even in complete darkness; monitor, diagnose, reveal and save time.

We've also upgraded the display to a 5.7" FHD+ (18x9) and the memory to 6GB RAM / 128GB ROM and added

a fingerprint sensor. With a faster chipset, Android 10 and a large, optimised battery, the Cat S62 Pro is the

ultimate work phone.

RUGGED CREDENTIALS

DROPPING YOUR DEVICE:

• Do: Use your device up to a height of 1.8 metres – it’s drop proof within this height range.

• Don’t: Throw it with force, or drop from above the 1.8 metre range – it’s durable, but not indestructible.

WATERPROOFING:

• Do: Use your device in damp and wet conditions. Ensure all components and covers are properly closed

before using in water. The device can withstand a depth of 1.5 metres, for up to 35 minutes.

• Don’t: Attempt to use it for longer than 35 minutes in 1.5 metres depth or beyond a 1.5 metre depth.

• Do: Use your device in dirty, dusty environments. The Cat® S62 Pro is certified IP68, an industry standard

measure for durability.

DUSTPROOF AND SCRATCHPROOF:

EXTREME TEMPERATURES:

• Do: Use your device within the operational temperature range of -25º C to + 50º C. It can also handle

extreme changes in temperature: shifting between cold and hot, or vice versa very quickly.

• Don’t: Use it outside the range of 0º C to + 45º C without the use of protective gloves.

WHAT’S IN THE BOX

• Device

• Quick start guide

• Warranty

• USB power cable and charging power adapter

• Factory-fitted screen protector (already on device)

Note:

7

1) Your device comes with a factory-fitted screen protector. Please ensure that the screen protector

remains in place. Removal of the screen protector may mean that any subsequent damage requiring

repairs will be considered to be ‘Out of Warranty’.

Please visit https://www.catphones.com/screen-protectors should you require a replacement screen

protector.

2) This device is only compatible with DAC headsets.

8. SIM/SD door

9. Front Camera

10. Fingerprint Scanner

11. Flash

12. Rear Camera

13. Thermal Camera

1. Earpiece

2. Power button

3. Volume Up/Down Keys

4. Speaker

5. USB Port

6. Microphone

7. Programmable Key

KEY FUNCTIONS

VOLUME UP/DOWN KEY

• Volume – press the Volume Up key to increase, or the Volume Down key to decrease the volume of the call,

ringtone, media or alarm

• Screenshot – press Power and Volume Down keys simultaneously (Screenshots are saved in the photo

album)

• Camera app – press Volume Up or Down key to take photo.

8

GETTING STARTED

INSTALLING SIM CARD(S) AND MEMORY CARD

1. Place your device on a flat, clean surface with the display facing upwards.

2. Use your fingertip to pull out the SIM/SD door and the SIM/SD tray.

3. Place the SIM card in the SIM 1/ SIM 2 tray with gold pins of the SIM card (facing down).

4. If you would like to use a microSD card, place this on the microSD tray with gold pins of the memory card

also facing down.

5. Carefully insert the tray back into the SIM card slot and reposition the door.

NOTE

• Push the SIM/SD door back in until it is fixed securely.

Some devices take two SIM cards.

When two SIM cards are inserted, both SIM card slots can support 4G/3G service.

9

CHARGING THE BATTERY

The S62 Pro battery cannot be removed from the device. To charge it:

1. Connect the USB power cable to the charging power adapter.

Only use Cat® phone approved chargers and cables. Unapproved equipment may cause damage to the device

or the battery and it will void the warranty.

2. Battery indicator changes from red to green when charging is completed.

IMPORTANT INFORMATION REGARDING FUTURE USE OF THE

BATTERY

When the battery power level is low, the device displays a prompt. When the battery power is almost

exhausted, your device will power off automatically. The time required to charge the battery depends on its

age and the environmental temperature.

If the battery is completely exhausted, your device may not power on immediately after charging starts. Allow

the battery to charge for a few minutes before attempting to turn it on. The on-screen charge animation may

not be displayed during this period.

POWERING YOUR DEVICE ON/OFF

POWER ON

• Press and hold the Power Key to turn on your phone.

The first time you turn on your phone, you will see a Welcome Screen. Select your preferred language and tap

START to continue the set-up.

• Press and hold to open the power off options (Power off/ Restart/ Screenshot) when the device is on.

• Press to lock or wake the screen when the device is idle.

• Press twice to open the Camera app when the device is locked.

• A Wi-Fi or Data connection is required to access data and services.

• If personal identification number (PIN) protection is enabled on your SIM Card, you will be asked to enter

your PIN before the Welcome Screen.

NOTE:

10

• A Google Account is required to use some of the Google services on your device. You will be asked to sign in

with your existing Google Account or set up a new account later.

• You may also record one or several of your fingerprints using the fingerprint scanner on the rear of the

device. This provides a secure way to unlock your device. You must also define a PIN code or pattern as a

secondary method for unlocking your device.

1. Press and hold the Power Key to open the Power Off options menu.

POWER OFF

2. Tap Power off.

TOUCHSCREEN

TOUCHSCREEN ACTIONS

• Tap: Use your finger to select an item, confirm a selection or start an app on the screen.

• Tap and hold: Tap an item with your finger and continue to press until the screen responds (e.g. to open the

options menu for the active screen, tap the screen and hold until the menu appears).

• Swipe: Move your finger across the screen either vertically or horizontally (e.g. swipe left or right to switch

between pictures).

• Drag: To move an item, tap and hold it with your fingertip then drag it to any part of the screen.

HOME SCREEN

The Home Screen is the starting point for accessing your device’s features. It displays app icons, widgets,

shortcuts and more.

You can customise your Home Screen with different wallpapers and adjust it to display your preferred items.

LOCKING AND UNLOCKING THE SCREEN

LOCKING THE SCREEN

1. If your device is turned on, press the Power Key to lock the screen. You can still receive messages and calls if

the screen is locked.

2. If the device is left undisturbed for a certain period, the screen will lock automatically. You can adjust the

length of this in the setting menu.

UNLOCKING THE PHONE

• Use the fingerprint sensor to unlock. You will be prompted to configure this during the set-up wizard. If you

want to add more fingerprints go to Settings – Security & Location – Fingerprint

When enrolling your fingerprints please make sure that you press your finger hard against the sensor. Failure

to do so may see inconsistent results when using the fingerprint sensor.

NOTE:

11

• Press the Power key to wake up the screen. Swipe up to unlock the screen. Enter pattern or PIN code if pre-

set.

NOTIFICATIONS AND STATUS INFORMATION

The Status Bar appears at the top of every screen. This displays notification icons, such as missed calls or

received messages (on the left) and phone status icons, such as battery status (on the right), along with the

current time.

DISPLAY

DISPLAY LAYOUT

STATUS ICONS

NOTIFICATIONS ICONS

4G

Connected to 4G mobile network

LTE

Connected to LTE mobile network

Cellular signal

Vibrate mode

3G

Connected to 3G mobile network

Location service is being used

G

E

H

Connected to GPRS mobile network

Battery is full

Connected to EDGE mobile network

Battery is charging

Connected to HSDPA mobile network

A Screenshot is captured

H+

Connected to HSPA+ mobile network

Airplane mode

R

Roaming

VoLTE

VoWiFi

Mobile network signal strength

NFC enabled

New email message

Alarm is set

Data is syncing

Connected to a Wi-Fi network

Upcoming event

Connected to a Bluetooth device

Missed call

Speakerphone is activated

Phone microphone is muted

Downloading data

New text message

Problem with sign-in or sync

The navigation bar is located at the bottom of the screen. While the device is in full screen mode, please swipe

up from the bottom of the device to make the navigation bar appears.

NAVIGATION BAR

12

• If you would like to access recently used apps, please swipe up from the bar.

The bar contains three main soft buttons:

Back Button

Home Button

Recent App Button

• Tap to return to the previous screen.

• Tap to return to the home screen

• Tap and hold to activate Google Assistant

• Tap to select the previous opened apps.

NOTIFICATION PANEL

You will get a notification when you receive a new message, miss a call, or have an upcoming event. Open the

notification panel to see alarms, wireless network operators or to view a message, reminder or event

notification.

OPENING THE NOTIFICATION PANEL

1. When a new icon appears, swipe down the notification panel and then drag down to open the notification

panel.

2. Tap a notification to open the related app.

CLOSING THE NOTIFICATION PANEL

1. To close the notification panel, slide the bottom of the panel upwards.

2. To close a notification (without viewing), hold the notification and drag it to the left/right of the screen.

NOTE:

• Notifications preferences can be changed in Settings > Apps & notifications.

SHORTCUT ICONS

ADDING A NEW HOME SCREEN ITEM

1. From the Home Screen, swipe up.

2. To add an item to your Home Screen, drag its icon to your chosen position.

MOVING A HOME SCREEN ITEM

1. Tap and hold an app icon on the Home Screen until it moves.

2. Without lifting your finger, drag the icon to the chosen position on the screen, then release it.

•There must be enough space for an icon to fit on the Home Screen panel.

REMOVING A HOME SCREEN ITEM

NOTE:

13

1. Tap and hold an app icon on the Home Screen until it moves.

2. Without lifting your finger, drag the icon to Remove, then release.

WIDGETS

A widget lets you preview, or use an app. You can place widgets on your Home Screen as icons or preview

windows. Several widgets are already installed on your phone, while more can be downloaded on Google Play.

ADDING A WIDGET

1. Tap and hold the Home Screen.

2. Tap the Widgets option to see what is available.

3. Drag your chosen widget to the Home Screen.

REMOVING A WIDGET

1. Tap and hold the widget icon on the Home Screen until it moves.

2. Without lifting your finger, drag the icon to Remove at the top of the screen, then release.

FOLDERS

CREATING A FOLDER

You can group certain apps on your Home Screen by dragging an icon or shortcut and releasing it on top of

another. This will create a new folder that you can add to as you choose.

RENAMING A FOLDER

1. Tap a folder to open it.

2. Enter a new folder name in the title bar.

3. Then touch the screen anywhere outside of the folder.

WALLPAPERS

CHANGING YOUR WALLPAPER

1. Tap and hold the Home Screen.

1. Tap Wallpapers.

2. Scroll through the available options.

3. Tap Set Wallpaper on chosen image – then choose whether to set it as Lock Screen wallpaper, Home

Screen wallpaper or both.

TRANSFERRING MEDIA TO AND FROM YOUR DEVICE

Transfer your favourite music and pictures between your device and PC in Media Device MTP mode.

14

1. Connect your device to your PC with the USB power cable.

2. Open the notification panel and the USB connection options. Tap Charging this device via USB to access

more options.

3. Tap File transfer to share files to/from your PC.

4. Your device should be displayed as a removable device displaying the phone’s internal storage. If a memory

card is inserted, microSD card will also be visible. Copy the chosen files to your device.

Your device will be displayed as a removable device, showing the phone’s internal storage. If a memory card is

inserted, the microSD card details will also be visible.

• If you are using a MAC, the drivers must be downloaded from: http://www.android.com/filetransfer/

USING FLIGHT MODE

Some locations may require you to switch off data connections. Instead of turning off your device, you can set

it to Flight Mode.

1. From the Home Screen, swipe down the notification panel and tap

to switch on Flight mode.

• You can also access Flight Mode from the Setting menu.

MAKING A PHONE CALL

There are multiple ways to place a call. You can either:

1. Dial a number into the keypad.

2. Select a number from your contacts list.

3. Select a number from a web page or document that contains a phone number.

• When you’re on a call, you can either answer incoming calls or send them to your voicemail. You can also set

up conference calls with several participants.

• When you’re on a call, press the Home button to return to the Home Screen and use other functions. To

return to the calling screen, drag the notification bar down and tap Current call.

MAKING A PHONE CALL WITH THE KEYPAD

1. From the Home Screen, tap

. Then tap

to show the keypad.

2. Tap the numeric keys to dial the phone number.

3. After you enter the number, or select the contact, tap

.

Tip: Your device supports the SmartDial function. As you type a number into the keypad, it automatically

searches your contacts and lists options for ones that match the number. You can close the keypad to view

more possible matches.

NOTE:

NOTE:

NOTE:

15



1. Swipe up from the Home Screen > Contacts to display the contact list. From the keypad, tap the

see the contact list.

tab to

MAKING A PHONE CALL FROM CONTACTS

2. Select a contact.

3. Tap the phone number to call the contact.

MAKING A PHONE CALL FROM THE CALL LOG

1. Swipe up from the Home Screen > Phone

to see a list of latest calls. If you cannot find the desired

contact, tap

> Call history to display all call history.

2. Select a contact from the list and tap to make a call.

ANSWERING AND REJECTING A PHONE CALL

When you receive a phone call, the incoming call screen will show the caller ID, and any additional caller

information that you have entered in Contacts.

• To answer a call, tap ANSWER.

• To reject the call, tap DECLINE.

• To reject the call and send a message directly to the caller, tap the call notification banner and then tap

Select one of the available template message options or tap Write your own to compose a personal message.

.

ENDING A PHONE CALL

During a phone call, press Hang up

to hang up.

CONTACTS

The Contacts app lets you save and manage information about your contacts.

OPENING THE CONTACTS APP

When you set up the device, Contacts will display a message outlining how to start adding contacts. To open

the app, do one of the following:

• Swipe up from the Home Screen and then tap Contacts

.

• All of your contacts are displayed alphabetically in a scrolling list. Tap on them to see more details.

You can copy your contacts from the SIM card or saved in internal storage or a memory card.

COPYING CONTACTS

16

1. In the contacts list, tap

> Settings > Import.

2. Do one of the following:

• To import contacts from the SIM card:

Tap SIM card. Select the contact(s) and tap IMPORT to import the selected contact(s).

• To import contacts from the internal storage or memory card:

Tap .vcf file. Select the location where to import the contacts and tap the *.vcf file to import the contacts.

BACK UP CONTACTS

You can copy contacts to internal storage.

1. In the contacts list, tap

> Settings > Export.

2. Select the location where to save the contacts and tap SAVE.

ADD A NEW CONTACT

1. In the contacts list, tap

to add a new contact.

ADDING A NEW CONTACT TO YOUR FAVOURITES

1. Tap the contact you want to add to Favourites.

2. Tap

at the top right corner.

2. Enter the contact’s name, and then add any detailed information such as phone number or address.

3. Tap Save to store the contact information.

SEARCHING FOR A CONTACT

1. In the contacts list, tap Search contacts to search for a contact.

2. Enter the name of the contact for which you are searching. As you type, contacts with matching names

appear below the search box.

EDITING A CONTACT

You can always make changes to the information you have stored for a contact.

1. In the contacts list, tap the contact you want to edit.

2. Tap Edit contact.

3. Make the desired changes to the contact information, then tap Save. To cancel any changes press X.

DELETING A CONTACT

17

1. In the contacts list, tap the contact you want to delete.

2. Tap

> Delete.

3. Tap Delete again to confirm.

USING THE ON-SCREEN KEYBOARD

DISPLAYING THE KEYBOARD PANEL

Some apps open the keyboard automatically. In others, tap a text field to open the keyboard. Press the Back

button to hide the keyboard.

USING THE LANDSCAPE KEYBOARD

If you find it difficult to use the keyboard in portrait orientation, simply turn the device sideways. The screen

will now display the keyboard in landscape orientation, providing you with a wider keyboard layout.

CUSTOMISING YOUR KEYBOARD SETTINGS

1. Swipe up from the Home Screen > Settings

> System > Languages & input.

2. Do any of the following:

• Tap Virtual keyboard to configure the Google keyboard and Google voice typing settings.

• Tap Physical keyboard to configure the external keyboard settings.

• Tap Advanced to access the input assistance related settings.

WI-FI®

Access to wireless access points (hotspots) is required to use Wi-Fi on your device.

TURNING ON WI-FI AND CONNECTING TO A WIRELESS NETWORK

1. Swipe up from the Home Screen > Settings

> Network & Internet.

2. Tap Wi-Fi and slide the Wi-Fi switch to the right

.

3. Choose a Wi-Fi network to connect to from the list.

4. If you select an open network, the device will connect automatically. If you select a network that is secured,

you must enter a password and tap Connect.

• You will not have to re-enter the password for a secured network if you have connected to it before, unless

the device has been reset to its default settings, or if the Wi-Fi password has been changed.

• Obstacles blocking the Wi-Fi signal will reduce its strength.

Tip: On the Wi-Fi settings screen, tap + Add network to add an invisible Wi-Fi network.

NOTE:

18

SMS AND MMS

OPENING MESSAGING

To open the app, do one of the following:

• Tap

on the Home Screen.

• Swipe up from the Home Screen > Messages

.

CREATING AND SENDING A TEXT MESSAGE

You can create a new text message or open an ongoing message thread.

1. Tap Start Chat to start a new text message or tap an existing message thread to open it.

2. Enter a phone number or contact name into the To field. When you type, the SmartDial will attempt to

match it with the device’s contacts. Either tap a suggested recipient or continue to type. If you want to open

an existing message thread, simply tap it.

3. Tap the text box to compose your message. If you press the  Back button while composing a message, it

will save as a draft in the message list. Tap the message to resume.

4. When your message is ready to send, tap

.

NOTE:

• As you view and send additional messages, a message thread is created.

CREATING AND SENDING A MULTIMEDIA MESSAGE

1. On the messaging screen, tap Start Chat.

2. Enter a phone number or contact name into the To field, or scroll down the contact list to find the contact

you wish to message. Tap to start a group conversation.

3. Tap the text box to compose a message.

4. Tap

again and select the type of media file. Select the file to attach.

5. Your device is now in multimedia mode. Once you’re done, tap

.

OPENING AND REPLYING TO A MESSAGE

1. In the message list, tap a text or multimedia message thread to open it.

2. Tap the text box to compose a message.

3. When ready, tap

.

CUSTOMISING THE MESSAGE SETTINGS

In the message list, tap

> Settings to customise your message settings. Choose from:

19

Default SMS app: Specify the default SMS app (Messages is default)

BLUETOOTH®

Your Cat® S62 Pro device has Bluetooth. It can create a wireless connection with other Bluetooth devices, so

you can share files with your friends, talk hands-free with a Bluetooth headset, or even transfer photos from

your device to a PC.

If you are using Bluetooth, remember to stay within 10 metres of the Bluetooth device you want to connect to.

Be aware that obstacles like walls or other electronic equipment may interfere with the Bluetooth connection.

TURNING ON BLUETOOTH

1. Swipe up from the Home Screen > Settings > Connected devices.

2. Tap Connection preference > Bluetooth and slide the switch

to the right to enable the function.

When Bluetooth is turned on, the Bluetooth icon

appears in the notification bar.

PAIRING AND CONNECTING A BLUETOOTH DEVICE

Bluetooth lets you do the following:

• Use a hands-free Bluetooth device.

• Use a mono or stereo Bluetooth headset.

• Control what plays through the Bluetooth headset remotely.

Before you use Bluetooth, you need to pair your device with another Bluetooth device as follows:

1. Ensure that the Bluetooth function on your device is enabled.

2. Tap + Pair new device. Your device will then search for Bluetooth devices in range.

3. Tap the device you want to pair with.

4. Follow the on-screen instructions to complete the connection.

NOTE:

• Once a partnership has been created, you will no longer have to enter a password if you connect to that

Bluetooth device again.

SENDING FILES VIA BLUETOOTH

With Bluetooth, you can share pictures, videos, or music files with family and friends. To send files via

Bluetooth:

1. Tap the file you want to send.

2. Tap

> Bluetooth, then select a paired device.

20

DISCONNECTING OR UNPAIRING A BLUETOOTH DEVICE

1. Swipe up from the Home Screen > Settings > Connected devices.

2. Tap Previously connected devices.

3. Tap

and then tap FORGET to confirm the disconnection.

TAKING PHOTOS AND RECORDING VIDEOS

You can use your Cat® S62 Pro to shoot and share pictures and videos.

OPENING YOUR CAMERA AND TAKING A PHOTO

To open the camera app, do the following:

• Tap

on the Home Screen.

• By default, the app opens in Camera mode. If not, tap Photo at bottom of the screen.

• To switch between front and rear camera, tap

.

• Compose your photo within the photo capture screen.

• Tap the screen to focus on a specific area.

• Pinch to zoom in/out of the subject.

• Tap

properties.

to change the camera settings; set a self-timer, adjust the anti-flicker or adjust the image

• Tap

to take your photo.

• you can also take photos by pressing the Volume up/down keys.

VIEWING PHOTOS

To view your photos, do one of the following:

• When in the Camera app, tap the thumbnail of the latest captured photo in the bottom left corner to access

the gallery app.

NOTE:

• To go back to Camera view, press the camera icon in the top left corner or swipe to the right until the

capture screen appears again.

• Swipe up from the Home Screen > Photos

to view all photos and videos.

EDIT AND SHARE PHOTOS

As you browse through your photos, the following options are available:

• Share: Tap

to share your photos through various apps available on your device.

21

• Edit: Tap

to edit your photos with a range of options available.

• Details: Tap

to see the details of the photos.

• Delete: Tap

to delete the photos you don’t want.

SHOOTING A VIDEO

1. Tap

on the Home Screen.

• By default, the app opens in Camera mode.

2. Swipe to the right to switch to Video mode.

• To switch between front and rear camera, tap

.

3. Tap

to start recording.

4. While recording, do one of the following:

• Pinch to zoom in/out on the subject.

• Tap

to pause the recording. Tap again to resume.

• Tap

to take a photo.

5. Tap

to stop shooting.

VIEWING YOUR VIDEOS

USING PHOTOS

OPENING PHOTOS

To view a video after recording, tap the thumbnail of the latest captured video in the bottom right hand corner

to access the gallery app.

The Photos app automatically searches for pictures and videos saved to your device or memory card. Select

the album/folder and play as a slideshow, or select items to share with other apps.

Swipe up from the Home Screen > Photos

pictures and videos by storage location and stores these files in folders. Tap a folder to view the pictures or

videos inside.

to open the application. The Photos app categorises your

VIEWING A PHOTO

1. In Photos, tap a folder to view the photos inside.

22

2. Tap the picture to view it in full-screen mode, then swipe left or right to view the previous or next picture.

3. To zoom in on the image, pinch two fingers apart from each other at the location of the screen where you

want to zoom in. In zoom mode, swipe your finger up or down and left or right.

Tip: The picture viewer supports rotation function. Tap the

adjust itself to the rotation.

after you rotated the device, the picture will

CROPPING A PICTURE IN PHOTOS

1. When viewing a picture, tap

.

2. Tap

and use the cropping tool to select the portion of the picture to crop.

• Drag from the inside of the cropping tool to move it.

• Drag an edge or a corner of the cropping tool to resize the image.

3. Tap Done > Save copy to save the cropped picture.

• To discard the changes, press the Back button and tap DISCARD.

USING THE THERMAL CAMERA

Your Cat S62 Pro includes a thermal camera, which can visualise and measure contrasting surface

temperatures. The thermal camera is controlled using the MyFLIR app, which you will find on your Home

Screen.

NOTE:

• The temperature indicated is always a calculated estimate and should not be taken as an exact

measurement.

• The temperature is affected by many factors, including distance to the object and the object’s effectiveness

in emitting energy as thermal radiation (emissivity). Temperatures may also be influenced by the time of day,

weather conditions, or reflections of other objects in the vicinity.

OPENING YOUR THERMAL CAMERA

• To open the app, tap the MyFLIR icon

. By default, this can be found on the Home Screen.

• Press the Back or Home button to close the camera.

1. By default, the MyFLIR app is in Photo mode. Otherwise, tap

and select

to switch to Photo mode.

TAKING A PHOTO

2. Compose your photo within the photo capture screen.

• Tap

to change the colour palette.

23

• Tap

to configure the camera settings.

• Tap

to configure image blending. The options are Thermal Only

, MSX

, Blend IR And Visible

or Visible Only

. With MSX or Blend IR and Visible selected, drag the slider

to alter the

intensity of the overlaid image.

Drag the Macro slider

close to the phone.

to adjust thermal and visible camera alignment when you are looking at an object

• Tap

to add a Spot Meters or Regions Of Interest to the image.

to display the IR Scale on the right side of the image. The IR Scale shows the relationship between

• Tap

the temperatures detected and the colours displayed in the image. You can manually set a locked IR Scale

either by tapping the upper and/or lower value and manually typing in the desired temperature, or by

sliding/pinching the IR Scale. Double-tap the IR Scale or tap

temperature ranging.

to unlock, and return to automatic

• Tap

return to automatic temperature ranging.

to lock the temperature range shown on screen to the current values. Tap

to unlock, and

• Tap

Temp Measurement off for use in normal conditions for greater accuracy.

to Toggle High Temp Measurement between off (up to 120º C) and on (up to 400º C). Keep High

• Tap

to manually perform an image calibration. See section on Tuning.

3. Tap

to take your photo.

SHOOTING A VIDEO

1. Tap

and select

to switch to Video mode.

2. Tap

to start recording. To stop shooting, tap

.

CREATING A TIME-LAPSE VIDEO

1. Tap

and select

to switch to Time-lapse mode.

2. Tap

to open the Time-lapse setting menu. Configure as necessary.

to start recording. To stop shooting, tap

3. Tap

VIEWING YOUR CAPTURED PHOTOS OR VIDEOS

Open the latest captured photo or video by tapping the thumbnail image in the bottom right hand corner of

the screen.

• Tap

to switch to the Library view.

24

• Swipe left/right to view the previous/next file.

• Tap

to play a video.

• Tap

to edit a photo. You can add, remove, or change Spot Meters or Regions of Interest; you can adjust

the image blending options; or you can change the colour palette. When complete, tap

to save changes.

• Tap

to share the selected file via various apps available on your device.

• Tap

to delete the selected file. Tap OK to confirm deletion.

• Tap

emissivity and location (if Save Location setting is enabled).

to view information about the recorded file, including the date, time, colour palette, temperature,

• Tap

to generate a PDF report of the selected image.

TUNING

The camera has a mechanical shutter inside that periodically activates and allows the thermal camera to do a

calibration or image refresh. When the shutter activates, the image will freeze for a brief period. You can also

manually trigger this by tapping

.

The purpose of the shutter is to allow the camera to provide an improved image. The Cat S62 Pro performs the

tuning operation automatically on a periodic basis. Note that when the Spot Meter is turned on, the tuning will

occur more often.

MEASURING TEMPERATURE WITH SPOT METERS

Use the Spot Meter to measure surface temperatures, either on a saved thermal image or from the live

thermal camera feed.

1. Tap

, and then the same icon again from the sub menu that appears below.

2. A Spot Meter appears on the display and gives a temperature reading.

3. Tap and drag the Spot Meter to another point. You can add up to three Spot Meters.

4. Tap and hold over a Spot Meter to delete it.

FROM A PREVIOUSLY CAPTURED IMAGE:

1. When viewing a previously captured image, tap the Spot Meter icon

from the sub menu.

, and then the same icon again

2. A Spot Meter appears on the display. Tap and drag it to your chosen position.

3. You can add up to three Spot Meters. Tap and hold over a Spot Meter to delete it.

NOTE:

25

To switch between Celsius and Fahrenheit in the live thermal camera feed, select Menu > Settings, then slide

the Temperature Unit switch.

You can select from a range of visualisations for different temperatures by selecting the colour palette icon

CHANGING COLOUR PALETTES

, and choosing from nine colour schemes.

FOR ADDITIONAL HELP

NOTE:

For additional help and guidance with the MyFLIR app, consult the in-app Help section. Select Menu >

Settings, then Help.

To get more out of your device you can also check out the Tips & Tricks page. Select Menu > Tips & Tricks.

You can tap and hold on any of the icons on the top menu bar

identify it.

to

ENJOYING MUSIC

Music files can be transferred from a PC onto your Cat® S62 Pro so you can listen to music wherever you are.

COPYING MUSIC TO YOUR DEVICE

1. Connect your device to a computer with the USB cable and select File Transfer on the device.

2. On the PC, navigate to the USB drive and open it.

3. Create a folder in the root directory of your device or in the SD card (for example, Music).

4. Copy your music from the PC to the new folder.

5. To safely remove your device from the PC, wait until the music has finished copying, then eject the drive as

required by your PC’s operating system. Disconnect the USB cable.

OPENING YouTube Music and PLAYING MUSIC

• Swipe up from the Home Screen, then tap YT Music

• Tap Library, then tap Device Files to add songs into your playlist, or:

• Tap the Search button on the right top corner to search your songs online.

USING GOOGLE PLAY

You must sign in to a Google Account to use Gmail, Google Calendar, and to download and use other Google

apps.

CREATING A GOOGLE ACCOUNT

If you chose not to create a Google Account during set up, it’s easy to create one:

26

During set-up, you may have configured your device to an existing Google Account. The first time you open the

Gmail app on your phone, your inbox will contain the messages from this account.

1. Swipe up from the Home Screen > Settings

.

2. Tap Accounts > Add account.

3. Tap Google

, then follow the on-screen instructions.

USING GMAIL

OPENING GMAIL

Swipe up from the Home Screen > Gmail

.

SWITCHING BETWEEN ACCOUNTS

Tap on the account picture in the top right of the screen, and the account selection box will appear for you to

switch to the account you want to view.

CREATING AND SENDING AN EMAIL

1. On the Inbox screen, tap (

).

2. Enter the message recipient’s email address in the To field.

• To send the email to several recipients, separate the email addresses with spaces.

• To Cc or Bcc other recipients, tap V to display the Cc/Bcc fields.

3. Enter the email subject and compose your message.

• If you want to add a picture attachment, tap

> Attach file, to select a file.

4. To send, tap

.

REPLYING OR FORWARDING EMAIL

1. Select the email on the Inbox screen.

2. Tap

to reply, or tap

to select Reply all or Forward.

CUSTOMISING YOUR GMAIL SETTINGS

3. On the Gmail home screen, tap

> Settings.

4. Choose General settings, or an email account.

27

5. Tap an option and change the necessary settings.

USING GOOGLE PLAY STORE

Download and install apps and games on Play Store.

OPENING GOOGLE PLAY

Swipe up from the Home Screen > Play Store.

SEARCHING FOR APPS

To find apps on Google Play home screen, you can:

• List apps by category: Tap a category and scroll through.

• Use Search: Enter search keywords in the field.

• To view your installed apps, tap

> My apps & games.

INSTALLING AN APP

1. Swipe up from the Home Screen > Play Store .

2. Tap a category, and then tap the item you want to download for added information.

3. To install the item, tap Install.

NOTE:

You can check the progress of a download in the notification panel.

UNINSTALLING AN APP

1. On Play Store home screen, tap

> My apps & games.

2. Select tab INSTALLED.

3. Choose the app you want to uninstall and tap Uninstall.

4. Tap OK to remove the app from your device.

NOTE:

Apps can also be managed by going to the main phone Settings > Apps & notifications. They can also be

uninstalled directly from the App drawer by holding your finger on the app and dragging it up to Uninstall.

SYNCHRONISING INFORMATION

Some apps (for example, Gmail and Calendar) on your Cat® S62 Pro provide access to the same information

that you can add, view and edit on other devices. If you add, change or delete information in any of these apps

on other devices, the updated information will also appear on your device.

28

This is made possible through over-the-air data synchronisation. The process occurs in the background and

does not interfere with your device. When your device is synchronising, a data synchronisation icon will be

shown in the notification bar.

MANAGING YOUR ACCOUNTS

You can synchronise contacts, email and other information on your device with multiple Google Accounts or

other accounts, depending on the apps you have installed.

For example, adding a personal Google Account means your personal email, contacts, and calendar entries are

always available. You can also add a work account, so your work-related emails, contacts and calendar entries

are kept separate.

ADDING AN ACCOUNT

1. Swipe up from the Home Screen > Settings.

2. Tap Accounts. The screen will show your current synchronisation settings and a list of your current accounts

being used in related applications.

• In some cases, account details may need to be obtained from your network administrator support. For

example, you may need to know the account’s domain or server address.

NOTE:

3. Tap + Add account.

4. Tap the account type to add.

5. Follow the on-screen instructions to enter the required and optional information about your account. Most

accounts require a username and password, but the details depend on the kind of account and the

configuration of the service to which you are connecting to.

6. When you are finished, your account will be added to the list in the Accounts settings screen.

REMOVING AN ACCOUNT

An account and all information associated with it can be removed from your device, including email, contacts,

settings, etc. Some accounts, however, cannot be removed, such as the first account you signed into on your

device. If you attempt to remove certain accounts, be aware that all personal information associated with it

will be deleted.

1. On the Accounts settings screen, tap the account to delete.

2. Tap REMOVE ACCOUNT, then again when prompted to confirm.

CUSTOMISING YOUR ACCOUNT SYNCHRONISATION

Background data use and synchronisation options can be configured for all the applications on your device.

You can also configure the kind of data synchronised for each account. Some applications, such as Contacts

and Gmail, can synchronise data from multiple applications.

Synchronising is two-directional for some accounts and changes made to the information on your device are

made to the copy of that information on the web. Some accounts support only one-way synchronisation and

the information on your device is read-only.

29

CHANGING AN ACCOUNT’S SYNCHRONISATION SETTINGS

1. On the Accounts settings screen, tap the account.

2. Tap Account sync. The data and synchronisation screen will open, displaying a list of information that the

account can synchronise.

3. Enable the items you want to sync by:

• Sliding the respective data switch to the right

.

• To disable automatic sync, slide the respective data switch to the left

.

Use Calendar to create and manage events, meetings and appointments. Depending on your synchronisation

settings, the calendar on the device stays in synchronisation with the calendar on your other devices.

USING OTHER APPS

USING THE CALENDAR

OPENING THE CALENDAR

Swipe up from the Home Screen > Calendar

options.

to open the app. Tap to display the various view and settings

CREATING AN EVENT

1. On any calendar view, tap

> Event, to start adding an event.

2. Enter the event title, location, or the contacts.

• If there is a time frame for the event, tap the beginning and end date, and times.

• If it is a special occasion such as a birthday or a day-long event, slide the All-day switch to the right

.

3. Set the time of your event reminder, invite people, set a colour and add any notes or attachments.

4. Once all information is entered and settings are complete, tap Save.

SETTING AN EVENT REMINDER

1. On any calendar view, tap an event to view its details.

2. Tap

to start editing the event.

3. Tap Add notification to set the reminder for the event.

4. Tap Save to save it.

USING THE ALARM

30

You can set a new alarm or modify an existing alarm.

OPENING THE ALARM

Swipe up from the Home Screen > Clock

> to use your device alarm.

ADDING AN ALARM

1. On the alarm list screen, tap

to add an alarm.

2. To set your alarm, do the following:

• Set the hour and minutes by navigating around the dial, tap OK.

• To set repeat mode, tap the Repeat check box. Tap one or more options.

• To set the ringtone, tap

, then select an option.

• If you want your device to vibrate when the alarm sounds, tap the Vibrate check box.

• To add an alarm label, tap Label. Enter the label, then tap OK.

• By default, the alarm is automatically activated.

NOTE:

CALCULATOR

Your Cat® S62 Pro is equipped with a calculator that has both a standard and advanced mode.

OPENING THE CALCULATOR

1. Swipe up from the Home Screen > Calculator

to open the app.

2. Swipe left or rotate the device to horizontal to access the Advanced calculator mode.

MANAGING THE DEVICE

To configure your device, swipe up from the Home Screen > Settings.

SETTING THE DATE AND TIME

When you first turn on your device, there is an option to update the time and date automatically, using the

time provided by your network.

You cannot set the date, time and time zone manually if using the automatic option.

If you wish to set the date and time settings manually, do the following:

1 On the Settings screen, tap System > Date & time.

NOTE:

31

2. Tap Automatic date & time and select Off. Slide the Automatic time zone switches to the left

the functions.

to disable

3. Tap Set date, then select the desired date and tap OK.

4. Tap Set time. On the set time screen, tap the hour or minute field and move the pointer up or down to set

the time. Tap OK when the configuration is complete.

5. Tap Select time zone, and then select the desired time zone from the list.

6. Enable or disable the Use 24-hour format function to switch between 24-hour and 12-hour formats.

PERSONALISING THE DISPLAY

ADJUSTING THE SCREEN BRIGHTNESS

1. On the Settings screen, tap Display > Brightness level.

2. Drag the slider left to make the screen darker, or right to make it brighter.

3. Lift your finger off the slider to save your settings automatically.

Tip: Slide the Adaptive Brightness switch to the right to enable the device to automatically adjust the

brightness of the screen depending on the light level around you.

To enable the display to rotate when you turn your device between landscape and portrait, tap Advanced and

AUTO-ROTATE SCREEN

slide the Auto-rotate switch to the right

.

ADJUSTING THE IDLE TIME BEFORE THE SCREEN TURNS OFF

If your device is idle for a period of time, the screen will turn off to save battery power. To set a longer or

shorter idle time:

1. On the Settings screen, tap Display > Advanced > Sleep.

2. Select the duration you want the screen to be illuminated for before it turns off.

When your device is asleep, use the fingerprint sensor or press Power to wake the screen.

SETTING YOUR RINGTONE

TURNING ON SILENT MODE

• Press the Volume key until the volume control panel appears on the screen. Then tap the first icon to select

NOTE:

.

• All sounds except media and alarms will be silenced.

ADJUSTING THE RINGTONE VOLUME

32

You can adjust the ringtone volume from the Home Screen, or from any app (except during a call or when

playing music or videos). Press the Volume up/down key to adjust the ringtone volume to your chosen level.

You can also adjust the ringtone volume on the Settings screen.

On the Settings screen, tap Sound > Advance. Then slide the Also vibrate for calls switch to the right

.

1. On the Settings screen, tap Sound.

2. In Ring volume, drag the slider to adjust the volume level.

CHANGING THE RINGTONE

1. On the Settings screen, tap Sound.

2. Tap Phone ringtone.

3. Select the ringtone you want to use. A preview plays when selected.

4. Tap OK.

SETTING THE DEVICE TO VIBRATE FOR INCOMING CALLS

SETTING PHONE SERVICES

TURNING ON DATA ROAMING

1. On the Settings screen, tap Network & Internet > Mobile network.

2. Slide the Roaming switch to the right

.

NOTE:

DISABLE DATA SERVICE

1. On the Settings screen, tap Network & Internet > Mobile network.

2. Slide the Mobile data switch to the left

.

• Remember that accessing data services while roaming may incur considerable additional charges. Check with

your network service provider about data roaming fees.

USING NFC

NFC allows the exchange of data between two NFC-enabled devices, when both devices are either touching or

no more than a few centimetres apart.

ACTIVATING THE NFC FUNCTION

1. On the Settings screen, tap Connected devices.

2. Slide the NFC switch to the right

.

3. The Android™ Beam function will also be enabled automatically.

33



BEAMING CONTENT VIA NFC

1. Enable the NFC and Android Beam functions.

2. Open the content to be shared (you can share web content, YouTube videos, contacts and much more)

3. Place the devices back-to-back, when prompted Tap to beam, tap your screen.

PROTECTING THE DEVICE

ENABLE YOUR SIM CARD PIN

1. On the Settings screen, tap Security & location > Advanced >SIM card lock.

2. Slide the Lock SIM card switch to the right.

3. Enter the SIM card PIN, then tap OK. To change the SIM card PIN at any time, tap Change SIM PIN.

NOTE:

You can dial emergency numbers any time from your device.

PROTECTING THE DEVICE WITH A SCREEN LOCK

To keep the data on your Cat® S62 Pro more secure you can use a screen lock method.

1. On the Settings screen, tap Security & location > Screen lock.

2. Select the one of the available options.

• Swipe: Swipe the lock icon up to unlock the screen.

• Pattern: Trace the correct unlock pattern to unlock the screen.

• PIN: Enter a PIN number to unlock the screen.

• Password: Enter a password to unlock the screen.

• Fingerprint: Put your fingertip on the fingerprint scanner to unlock the screen

3. Follow the on-screen instructions to complete the set-up of your chosen screen lock method.

NOTE

When adding your fingerprint, it is important to place your fingerprint against the sensor firmly. You will also

need to enrol all of your fingerprint, the center, left and right side as well as the top of your fingertip. This will

ensure that the sensor works accurately.

The fingerprint that you store can also be used to access some apps that requires additional security. If this is

available, the app will notify you of this when you next log in.

MANAGING APPS

VIEWING AN INSTALLED APP

1. On the Settings screen, tap Apps & notifications.

2. In the apps list, do any of the following:

34

• Tap an app to view its details directly.

• Tap Notifications to configure the notification settings.

• Tap Advanced > App permissions to adjust what information the app can access.

• Tap Advanced > Default apps to set, or clear default apps.

• Tap Advanced > Emergency alerts to change your emergency alert settings.

• Tap Advanced > Special app access to configure which apps can access special features listed here.

RESETTING THE DEVICE

BACKING UP PERSONAL SETTINGS

Your personal settings can be backed up to Google servers with a Google Account. If you replace your device,

the backed-up settings will be transferred onto a new device the first time it is signed into from a Google

Account.

1. On the Settings screen, tap System > Backup.

2. Slide the Back up to Google Drive switch to the right

.

RESTORING FACTORY DATA

If you restore the factory data, your device will reset to the settings that were configured at the factory. All of

your personal data from the internal device storage, including account information, the system and application

settings, and any downloaded applications will be erased.

Resetting your device does not erase any system software updates that have been downloaded or any files on

a microSD card, such as music or photos.

1. On the Settings screen, tap System > Advanced > Reset options > Erase all data (factory reset).

2. When prompted, tap RESET PHONE, and then tap ERASE EVERYTHING. The device will reset to the original

factory settings, and then restart.

• Keep the ambient temperature between 0°C and 40°C while the device is being charged. Keep the ambient

temperature between -25°C to 50°C for using the device powered by a battery. Please wear protective gloves

while using it outside the range of 0ºC to + 45ºC.

APPENDIX

OPERATING TEMPERATURE

CHARGER OUTPUT

35

• Output rating of charger 5.0V/3.0A, 9.0V/2.0A

VIEWING THE E-LABEL

To view the regulatory information on your device, do the following:

1. From the Home Screen, tap > Settings.

2. On the Settings screen, tap About phone > Regulatory information.

PREVENTION OF HEARING LOSS

To prevent possible hearing damage, do not listen at high volume levels for long periods.

HEARING AID COMPATIBILITY (HAC)

REGULATIONS FOR WIRELESS DEVICES US VARIANT ONLY

WHAT IS HEARING AID COMPATIBILITY?

The Federal Communications Commission has implemented rules and a rating system designed to enable

people who wear hearing aids to more effectively use these wireless telecommunications devices. The

standard for compatibility of digital wireless phones with hearing aids is set forth in American National

Standard Institute (ANSI) standard C63.19. There are two sets of ANSI standards with ratings from one to four

(four being the best rating): an “M” rating for reduced interference making it easier to hear conversations on

the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with

hearing aids operating in the telecoil mode thus reducing unwanted background noise.

• This device has been tested and rated for use with hearing aids, with some of the wireless technologies that

it uses. However, there may be newer wireless technologies used in the device that have not been tested yet

for use with hearing aids. It is important to try the different features on your device thoroughly and in different

locations whilst using a hearing aid or cochlear implant to determine if there is any interfering noise. Consult

your service provider or the device manufacturer for information on hearing aid compatibility. If you have any

questions about return or exchange policies, consult your service provider or phone retailer.

• The U.S. Federal Communications Commission (FCC) has established requirements for digital wireless mobile

devices to be compatible with hearing aids and other hearing assistive devices.

• The wireless telephone industry has developed a rating system to assist hearing device users, reviewing the

compatibility of mobile devices with hearing devices.

• The ratings are not guaranteed. Results will vary depending on the user’s hearing device and hearing loss. If a

user’s hearing devices happens to be vulnerable to interference, the user may not be able to use a rated

phone device successfully. Testing the mobile device with a hearing device is the best way to evaluate if it is

suitable for a user’s personal needs.

• The FCC has adopted HAC rules for digital wireless phones. These rules require certain devices to be tested

and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility

standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

• M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to

hearing devices than mobile devices that are not labelled. M4 is the better/higher of the two ratings.

• T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to work better with a hearing device’s

telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/ higher of the two ratings.

36

(Note not all hearing devices have telecoils in them.) The tested M-Rating and T-Rating for this device (FCC ID:

ZL5S62PROE, ZL5S62PRO), M3 and T3.

EMERGENCY CALL

This device can be used for emergency calls in the service area. The connection, however, cannot be

guaranteed in all conditions. The device should not be relied on solely for essential communications.

CE SAR COMPLIANCE

This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to

electromagnetic fields by way of health protection.

The limits are part of extensive recommendations for the protection of the general public. These

recommendations have been developed and checked by independent scientific organizations through regular

and thorough evaluations of scientific studies. The unit of measurement for the European Council’s

recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is 2.0 W/ kg

averaged over 10 gram of tissue. It meets the requirements of the International Commission on Non-Ionizing

Radiation Protection (ICNIRP).

For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the

European Standard EN 62209-2, for use with dedicated accessories. Use of other accessories which contain

metals may not ensure compliance with ICNIRP exposure guidelines.

SAR is measured with the device at a separation of 5 mm to the body, while transmitting at the highest

certified output power level in all of the device’s frequency bands.

The highest reported SAR values under the CE regulatory for the phone are listed below:

Head SAR : 0.987 W/kg, Body SAR : 1.597 W/kg, Limbs SAR : 2.658 W/Kg

To reduce exposure to RF energy, use a hands-free accessory or other, similar options to keep this device away

from your head and body. The device must be carried 5mm from the body to ensure exposure levels remain at

or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do

not contain metallic components to support operation in this manner. Cases with metal parts may change the

RF performance of the device, including its compliance with RF exposure guidelines in a manner that has not

been tested or certified. Thus, use of such accessories should be avoided.

To reduce the level of exposure to radiation, please do the following:

• Use the mobile phone in good reception conditions to reduce the amount of radiation received

(in particular in underground car parks and on train or car journeys).

• Use a hand free kit

• For pregnant women, please keep the device away from the stomach

• Use the device away from genital parts

FCC REGULATION

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

37

This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiated radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a particular installation If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Consult the dealer or an experienced radio/TV technician for help.

FCC NOTE:

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void

the user‘s authority to operate the equipment.

RF EXPOSURE INFORMATION (SAR)

This mobile phone is designed and manufactured not to exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal Communications Commission of the United States.

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency

bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and

near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power

level, the actual SAR level of the device while operating can be well below the maximum value. This is because

the phone is designed to operate at multiple power levels so as to use only the power required to reach the

network. In general, the closer you are to a wireless base station antenna, the lower the power output.

The exposure standard for wireless devices employing a unit of measurement is known as the Specific

Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6 W/kg.

This mobile phone is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE

C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in

IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on

file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after

searching on FCC ID: ZL5S62PROE, ZL5S62PRO.

The highest reported SAR values under the FCC regulatory for the phone are listed below:

EU Variant - ZL5S62PROE:

Head SAR: 0.87 W/kg,

Body SAR: 1.10 W/kg,

Wireless Router SAR: 1.19 W/kg

38

US Variant - ZL5S62PRO:

Head SAR : 1.12 W/kg @1g,

Body SAR : 1.01 W/kg @1g,

Wireless Router SAR : 1.19 W/Kg@1g

While there may be differences between the SAR levels of various phones and at various positions, they all

meet the government requirements.

SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and

the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant

or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not

contain metallic components, to maintain a separation of 10 mm between this device and your body.

RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified,

and as such body-worn accessories should be avoided.

INDUSTRY CANADA STATEMENT

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage

préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

provoquer un fonctionnement indésirable.

Caution :

Avertissement:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for

harmful interference to co-channel mobile satellite systems;

(iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain

compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les

restrictions susmentionnées, notamment :

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à

l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les

mêmes canaux;

(iv) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires

angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque

d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués

Radiation Exposure Statement:

The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and

are safe for intended operation as described in this manual. The further RF exposure reduction can be

achieved if the product can be kept as far as possible from the user body or set the device to lower output

power if such function is available.

39

Déclaration d'exposition aux radiations:

Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le

Canada établies pour un environnement non contrôlé.

Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut

être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le

dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a

minimum separation distance of 10 mm must be maintained between the user’s body and the handset,

including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not

contain any metallic components. Body-worn accessories that do not meet these requirements may not

comply with RF exposure requirements and should be avoided.

DISPOSAL AND RECYCLING INFORMATION

This symbol on the device (and any included batteries) indicates that they should not be disposed of as normal

household garbage. Do not dispose of the device or batteries as unsorted municipal waste. The device

(and any batteries) should be handed over to a certified collection point for recycling or proper

disposal at the end of their life.

For more detailed information about the recycling of the device or batteries, contact your local city office, the

household waste disposal service, or the retail store where you purchased this device.

The disposal of the device is subject to the Waste from Electrical and Electronic Equipment (WEEE) directive of

the European Union. The reason for separating WEEE and batteries from other waste is to minimize the

potential environmental impacts on human health from any of the hazardous substances that may be present.

REDUCTION OF HAZARDOUS SUBSTANCES

This device is compliant with the EU Registration, Evaluation, Authorization and Restriction of Chemicals

(REACH) Regulation (EU Regulation (EC) No 1907/2006 (REACH) of the European Parliament and of the Council)

and the EU Restriction of Hazardous Substances (RoHS).

Directive (Directive 2011/65/EU (RoHS) and its amendment directive (EU) 2015/863 of the European

Parliament and of the Council). It is recommended to visit the Web site regularly for up-to-date information.

EU REGULATORY CONFORMANCE

Hereby, Bullitt Mobile Ltd. declares that this device is compliant with the essential requirements and other

relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website:

www.catphones.com/support/

Authorised Representative:

Authorised Representative Service

77 Camden Street Lower

Dublin D02 XE80

Ireland

40

EU COMPLIANCE STATEMENT

This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

Restrictions in: Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE),

Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT),

Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT),

Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), United Kingdom (UK), Switzerland (CH),

Norway (NO), Iceland (IS), Liechtenstein (LI) and Turkey (TR).

Observe the national local regulations in the location where the device is to be used. This device may be

restricted for use in some or all member states of the European Union (EU).

Some bands may not be available in all countries or all areas. Please contact the local carrier for more details.

Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates:

The maximum power for all bands is less than the highest limit value specified in the related Harmonised

Standard.

The frequency bands and transmitting power nominal limits applicable to this radio equipment are as follows:

SPECTRUM AND POWER TABLE (EU Variant Only)

Bands

Conducted Power(dB)

33

NOTE:

GSM 900

GSM 1800

WCDMA B1

WCDMA B5

WCDMA B8

FDD-LTE B1

FDD-LTE B3

FDD-LTE B5

FDD-LTE B7

FDD-LTE B8

FDD-LTE B20

FDD-LTE B28

FDD-LTE B38

TDD-LTE B40

BT/EDR

BLE

WLAN 2.4G

WLAN 5G

NFC 13.56MHz

41

31

24

24

24

24

24

24

24

24

24

24

24

22

13

3

19

19

-11.33

(dBuA/m at10m)

CAT® S62 Pro SPECIFICATION

Operation System

Processor

Memory

Cellular Network

Android 10

SD660-3

• Internal Memory: 128GB eMMC / 6GB LPDDR4X SDRAM

• External Memory: SDXC, Class 10/Ultra high speed/up to 256GB

US Variant

LTE: 1,2,3,4,5,7,8,12,13,17,25,26,41M,66,71

WCDMA: 1/ 2/ 4/ 5/ 8

GSM; 850/ 900/ 1800/ 1900

EU Variant

LTE: 1/ 2/ 3/ 4/ 5/ 7/ 8/ 20/ 28/38/ 40

WCDMA: 1/ 2/ 4/ 5/ 8

GSM; 850/ 900/ 1800/ 1900

Size 5.65” FHD+ with wet finger & glove support

• Rear Camera: 12MP Dual cell PDAF single LED flash

• Front Camera: 8MP

• Ambient Light

• Accelerometer

• Gyroscope

• Compass

• Proximity

• Bluetooth: 5.0

• USB: USB 2.0

• WiFi 802.11 a/b/g/n/ac

• GPS, aGPS, GLONASS, Gaileo, EGNOS, SBAS, Beidou

• NFC

• SIM type: Nano SIM

4000mAH

Ingress Protection: IP68

Drop: 1.8m

Waterproof: 1.5m for up to 35mins

Programmable Key with PTT mode

158.5 X 76.65 X 11.97mm

242g

* Design and specifications are subject to change without prior notice.

Display

Camera

Sensor

Connectivity

Battery

Others

Dimensions

Weights

42

Declaration of Conformity

Manufacturer:

Radio Equipment:

Name: Bullitt Mobile Limited

Address: One Valpy, Valpy Street, Reading, Berkshire, England RG1 1AR

Model: S62 Pro

Object of the Declaration: Rugged Smart Phone

Radio-related software version: LTE_C0201_S62Pro

Supplied Accessories and Components: Adapter, Battery, USB cable

We, Bullitt Mobile Limited, declare under our sole responsibility that the product described above is in

conformity with the relevant Union harmonization legislations:

RE Directive (2014/53/EU), RoHS Directive (2011/65/EU) and (EU)2015/863

The following harmonized standards and/or other relevant standards have been applied:

1. Health and Safety (Article 3.1(a) of the RE Directive)

EN 62311: 2020, EN 62479:2010

EN 50360:2017, EN 62209-1:2016

EN 50566:2017, EN 62209-2:2010

EN 50663:2017, EN 50665:2017

EN 62368-1:2014/A11:2017

2. Electromagnetic compatibility (Article 3.1 (b) of the RE Directive)

EN 301 489-1 V2.2.3

Draft ETSI EN301 489-1 V2.2.0

Final Draft ETSI EN301 489-1 V2.1.1

EN 301 489-3 V2.1.1

Draft EN 301 489-17 V3.2.2

EN 301 489-19 V2.1.1

Draft ETSI EN 301 489-52 V1.1.0

EN 55032:2015/AC:2016 Class B, EN 55035:2017

EN 61000-3-2 : 2014, EN 61000-3-3 : 2013

3. Radio frequency spectrum usage (Article 3.2 of the RE Directive)

EN 301 511 V12.5.1

EN 301 908-1 V13.1.1, EN 301 908-2 V11.1.2, EN 301 908-13 V11.1.2

EN 300 328 v2.2.2

EN 301 893 v2.1.1

EN 303 413 V1.1.3

EN 300 440 V2.2.1

EN 300 330 v2.1.1

The Notified Body (Name: CTC advanced, ID: 0682) performed the conformity assessment according to Annex

III, Module B of the Radio Equipment Directive 2014/53/EU and issued the EU-type examination certificate (Ref.

No.: T818713M-02-TEC) covering the essential requirements of article(s) 3.1a, 3.1b, 3.2.

Signed for and on behalf of: Bullitt Mobile Limited

Place: One Valpy, Valpy Street, Reading, Berkshire, England RG1 1AR, Date: 2. Jul.2020

Name: Arlen Huang, Function: Director of Quality, Signature:

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

◼

43



44

© 2020 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos,

"Caterpillar Yellow", the "Power Edge" and Cat “Modern Hex” trade dress as well as corporate and

product identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.cat.com / www.caterpillar.com

Bullitt Mobile Ltd. is a licensee of Caterpillar Inc.

Bullitt Mobile Ltd.’s and third-party trademarks are the property of their respective owners.

S62P_User_Manual_EN_V3



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FCC/ISED E-Label Information A. Information to be displayed 1. The information that will be displayed on the e-label and information that will remain in the user manual is shown below:

Information FCC/ISED ID number FCC logo 15.19 statement (This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.) on E-label Yes No No In Manual Yes No Yes Images of the e-label screen are provided below:

1 B. Access to the required information on the e-label 1. Users must be able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a products main or home menu. The actual steps are:

1. From the Home Screen, tap > Settings 2. On the Setting screen, tap About phone

> Regulatory Information No special access codes or permissions are required to go through the above steps beyond entering a user-defined password to protect against unauthorized access to the device. The information to the user is provided in the user manual. 2. Instructions must be provided with the product at the time of purchase, in the user manual, operating instructions, packaging material, quick guide pamphlet, etc. Alternatively, a product-

related website is permitted, if a reference (URL) to obtain the website information is provided at the time of purchase in the user manual, operating instructions, packaging material, quick guide pamphlet, etc. 3. Products must not require special accessories or supplemental plug-ins (e.g., the installation of a SIM/USIM card) to access the information. Access to regulatory information must be provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access. 4. The FCC/ISED ID, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification. 5. Both regulatory information and dedicated exclusive application(s) or script(s) must be secured and implemented in a factory-set-

unalterable format. The regulatory information must be capable of being retrieved and displayed locally, and under the control of the end user in possession of the product. The method must be secure, such that the application or script ensures that the regulatory information correctly displayed. C. Labeling for Importation and Purchasing 1. When e-labeling is used, a physical temporary label is also required on the product, or a label on the packaging, at the time of importation, marketing, and sales.8 The physical label can be a summary version of the required regulatory information, such that the product can be identified as complying with the FCCs 2 The devices do not require special code, accessories or supplemental plug-ins to access the information. Yes, it is clearly legible without the aid of magnification. Yes, it is secured and the user cannot modify it. The FCC/ISED ID, and model number are present on the product packaging. equipment authorization requirements. The information may simply be the FCC ID for products subject to certification. Products imported that are already packaged for sale and have a physical temporary label will satisfy this requirement. However, for products imported in bulk and not packaged individually, it is acceptable to use a temporary removable adhesive label on the product, or temporary or permanent labels on the shipping packaging or protective bags. Any removable adhesive label shall be of a type intended to survive normal shipping and handling. 3

 

 

 

 

 

 

Bullitt Group One Valpy, Valpy Street, Reading, Berkshire RG1 1AR, United Kingdom Tel: +44 (0) 7818 413 871 ; Fax: +44 (0) 7818 413 871 May 25, 2016 Federal Communications Commission Authorization and Evaluation Division Authorization Letter As the designated signatory for FCC applications under the Grantee code ZL5, | hereby authorize Wayne Huang and Eve Yao to sign all corresponding application documents relating to the processes of FCC Approval. If you have any questions regarding the authorization, please dont hesitate to contact us. Yours sincerely, CLA . Richard Wharton rwharton@bullitt-group.com