cover pages 1 & 2 pages 3 & 4 i I Bluetooth
Package Contents:
Operation Guide Getting Started Basic Functions
AX-38 TRUE WIRELESS EARBUDS
(2 Small, 2 Large, 4 Medium) Control Button Indicator LED Microphone AX-38 True Wireless Earbuds Charging Travel Case 8 Ear Cushions in 3 sizes USB Charging Cable Instruction Manual Lanyard Specifications:
20Hz -20kHz 5.0 33 ft Micro USB Version:
Bluetooth Working distance:
Charge Connector:
Speaker Size: <D6 mm Frequency Sensitivity:
Charging Case Battery:
Case Charge time: 2 hrs Earbuds Battery:
Earbuds Charge time: 1.5 Distortion Response:
105 dB3dB voltage:
Rate: <5% at lKHz 2 x 50 mAh SV/500 mA 400 mAh hr Indicator LEDs Micro USB Case Charge Port Lanyard Holes Before using this device, Charging page 6. instructions can be found on fully charge it. case and take out Open the charging the earbuds. Both LED lights will flash red and blue until one of the earbuds flashes earbud flashes right and left earbuds have synced to each other. red and blue, while the other blue, indicating that the Charge Contacts Pairing Cushion 1.Go to Bluetooth Settings on your mobile device. Phone calls 2.Turn BluetootON,on your device. 3.On your Bluetooth device, select
"iHome AX-38" from the list of available devices. 4.The earbud indicator LED will flash blue to indicate they are connected. On either earbud, hold the control button for 3 seconds to power on or off. Right Earbud:
Double press the control play or pause the audio. button to Press and hold to skip to the next audio track. Single press to raise the volume. Left Earbud:
Press and hold to skip to the previous audio track. Single press to lower the volume. When there is an incoming will pause the playback you of the call. Phone call functions work the same on either of the earbuds.*
call, the unit and ring to alert call, single press To answer an incoming the control button of either earbud. To end a call, double press the control button. and hold the control
*Volume with some smartphone To reject an incoming controls button. models. call, press may not work during phone calls pages 5 & 6 pages 7 & 8 back QU Troubleshootings Charging Warnings FCC ID: 2AHN6-HC-AU-BE-110 Warranty Earbuds do not sync with each other:
1.Replace the earbuds in the case. Do not use this unit for anything other than its 2. Connect the Micro USB charging Do not puncture, throw, drop, bend, or modify this cable to the charging front of the case. port on the 3. Plug the cable into a standard USB metallic objects. SV/500 mA or higher power output. Do not expose this product to corrosive liquids 1.Place the earbuds in the case, then ensuring both take out the earbuds, earbuds are turned on. 2.On each earbud, press and hold the for 5 seconds. control earbud will turn off after the LED flashes red 3 times. surface The 3. Replace the earbuds in the charging case. 4.Repeat the Getting Started process. into a charging When you plug the case mechanism charge port turns red. This means the case battery is being charged. the light to the left of the case While this is happening the lights buds inside the case wil be off. on the Earbuds do not pair to device:
1.Turn the Earbuds OFF by pressing surface the control until the LED blinks red, and then turns off. on each earbud The red light on the front of the case will blink when fully charged and go out if the case is unplugged from the power source. 4. When fully charged, unplug the charging cable from the power source. 2.Replace the earbuds in the case. Turn Bluetooth your device's then back ON. Then repeat the pairing process. OFF and them in the case. The indicator internal battery, If you want to charge the earbuds from the charge case replace light to the right of the charge port will glow white to indicate case charging and will turn off when charging is complete. simply intended use. product. Do not throw this product Do not short-curcuit the battery into fire or water. with any metal or such as salt water. Do not operate the unit if it has been wet or moist to prevent yourself electric and damage to the unit. against shock and/or to injury Do not allow children to play with this product as it is not a toy, and may present a choking such hazard in direct sunlight, console, or seat of a vehicle. Avoid leaving your device as on the dashboard, Do not leave your device, or use your device, in is likely to drop any area where the temperature below 32F, or may exceed a closed on a hot day. vehicle to electrical equipment should only be Repairs 140F, such as inside performed repairs Protect by a qualified may place the user your hearing by always electrician. Improper at serious risk. Prolonged your hearing level. affect hearing loss. capacity use at elevated listening volumes in at a safe may and could result Use the earbuds To avoid damage with this charging to the charging case, case only. please only use a USB 5V/1A or higher charger. In order to ensure the battery life, charge normally at least once a month. reasonable protection These limits may not cause harmful with Part 15 of the FCC Rules to the following two must accept any interference that including operation. has been tested and found to for a Class B digital device, harmful to provide and (2) this device interference to part 15 of the FCC Rules. complies is subject
(1) this device This device Operation conditions:
interference, interference received, may cause undesired Note: This equipment comply with the limits pursuant are designed against installation. can radiate installed instructions, radio communications. that interference guarantee particular installation. If this harmful interference reception, equipment try to correct the following Reorient Increase the interference measures or relocate the separation This equipment radio frequency and used in accordance with the However, between there is no will not occur in a equipment does cause to radio or television which can be determined by turning off and on, the user is encouraged to by one or more of the in a residential uses and generates, energy and, if not antenna. the equipment may cause harmful interference to the receiving and receiver. Connect circuit is connected. the equipment into an outlet on a different from that to which the receiver dealer Consult the technician for help. or an experienced radio/TV Caution:
expressly to operate Any changes approved the equipment. not could void the or modifications user's authority purchase date. Bytech purchaser this product at its option, shall be limited free from defects and with regard to this limited solely to repair Bytech NY INC. warrants to be materially workmanship to the original for a period of 12 months from the original responsibility warranty or replacement product which fails during normal consumer use. This warranty does extend to damage or failure results neglect, alteration, or maintenance. 12 months period following purchase, defects in material return the defective freight which accident, or workmanship, the product fails due to At any time during the abuse, improper from misuse, product (with prepaid) with proof of purchase. of any the not installation WWW.BYTECHINTL.COM Bytech NY Inc 2585 West 13street Brooklyn
(718)449-3700 NY 11223 CE @J (j e). MADE IN CHINA 2020 BYTECH NY INC.
*All trademarks property of the respective companies. and copyrights are the Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. AX-38 User Manual vl.2 082820 Black ink only, thin glossy paper, staple saddle bound, 5 sheets front & back