Preset 1 Multi-purpose button 1 Preset 2 Dim down Dim up Preset 4 Multi-purpose button 2 Preset 3 Pull the tab off Install wall mount 1 3 2 4 Open Casambi App Press any button and take into use Your brand new Xpress wireless switch Quick Guide Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement for FCC This device has been designed and complies with the safety requirements for portable (<20cm) RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01 as demonstrated in the RF exposure analysis. Installers must ensure that this device must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmit-
ter product procedures. Warning Changes or modifications not expressly approved by Casambi Technologies Oy could void the users authority to operate the equipment. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement for Canada This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with the safety requirements for RF exposure in accord-
ance with RSS-102 Issue 5 for portable use conditions. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux condi-
tions suivantes:
(1) lappareil ne doit pas produire de brouillage;
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent appareil est conforme aux limites dexposition aux RF conformment au norme CNR-102 mission 5 pour conditions dutilisation portable. Copyright Casambi Technologies Oy 2018 Bertel Jungin aukio 1 E, 02600 Espoo, Finland