FCC ID: TCLEPIC PROJECTION KEYBOARD

EPIC User Guide Copyright:

All rights reserved by Celluon. All page contents are properties of Celluon. Celluon, evoMouse,Magic Cube are trademarks or registered trademark of Celluon. All other products are trademarks or registered trademarks of the irrespective companies. Please refer to host device instruction manual for Bluetooth pairing information. Safety Precautions 1. Avoid exposing this product to direct sunlight for extended periods of time, and keep it away from heat sources. 2. There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur. 3. Applying excessive force or impact to this product may result in product damage, and will void warranty. 4. To ensure safety and prevent damage, use only the dedicated Micro-USB to USB cable supplied with this product. 5. Never attempt to disassemble or service this product yourself. Doing so can result in electrical shock and void warranty. 6. This is a Class I laser product. For your safety, please do not stare directly into the laser source. Doing so could damage your eyes. 7. Avoid placing any object within the space between the main unit and the laser projection keyboard layout. 8. Please do not use this product on uneven or irregular surfaces. Place the product on a flat surface. Avoid table or surface that is reflective, such as glass or mirror. Caution Use of control or adjustments or performances of procedures other than those specified herein may result in hazardous radiation exposure. FCC Compliance Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference to another device. 2. This device must accept any interference received, including interference that may cause undesired operation. 2 3 FCC Class Notice This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses ,and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur with special installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase separation between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician. FCC Warning This equipment generates and uses radio frequency energy. If this equipment is changed or modified in any way except for modifications approved in this manual, it may cause harmful interference. Any unauthorized changes or modifications to this equipment could void the users authority to operate this device. Industry Canada Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. 4 5 RF Exposure Information The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Caution:

1. Battery may explode if replaced with an incompatible battery. Dispose the used batteries according to the instructions.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 2. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be touched during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. 6 Certification 7 Environmentally Friendly Disposal and Recycling Built-in Battery Rechargeable Lithium-ion Polymer Battery:

Battery Operating Time: Approx. 120 minutes (with continuous use) Capacity: 660 mAh (Max) @ 3.7V Charging the Battery: Use supplied USB cable to begin charging the battery. When charging is complete, battery status LED turns green. Charging Time: Approx. 180 minutes Note Charging time increases if product is used while charging. To protect the environment, dispose of this product separately from household waste once it has reached its end of life, or take it to your local electronic waste disposal center. 8 9 Cautions 1. For Safety reasons, be sure to use only the Micro USB to USB cable specified for this product. 2. Make sure to fully charge the battery before using the 3. Battery charging times may vary slightly depending on the product for the first time. ambient temperature. 4. The battery may not be charged to 100 percent of its rated cell capacity even when the battery status LED indicates green light. 5. Using or storing the battery in high temperature, humidity and pressure environments may cause the battery to explode. 6. Since the battery is a consumable item, its storage capacity decreases gradually through charge cycles. Contents 1. Product Features........................................................... 12 2. Package Contents........................................................ 12 3. How EPIC Works.......................................................... 13 4. Identifying Parts.................... 15 5. Connecting EPIC............................... 18 6. Making Adjustments.................................................... 22 7. Specification.................................................................... 28 10 11 1. Product Features English QWERTY keyboard layout. Truly portable design perfect for on-the-go. Full size key pitch and shortcut keys for ease of operation Superior durability (no moving parts inside) Built-in lithium-ion rechargeable battery for mobility and convenience Compatible with latest operating systems: Windows XP/Vista/7/8(not compatible with Windows Phone 7 and 8), iOS4 and later (most iPhone and iPad) and Android 4.0 and later, Mac OS X 2. Package Contents EPIC Micro USB Cable User Manual Quick Start Guide 3. How It Works: Technology This product emits infrared light from the lower end of the device to detect objects such as fingers. When an object passes through they are illuminated by the infrared light source, any infrared light reflecting off of an object is detected by the sensor. Information on the position and movement of the object is then analyzed to perform the products role as a keyboard. Sensitivity: difference in thickness, shape, and color of the users fingers or operating environment will result in differences in the amount of reflected infrared light. Please adjust sensitivity that best suits your environment. Refer to "Section 6: Making Adjustments" on how to adjust sensitivity. 12 13 Conditions to Avoid:

1. Avoid direct sunlight. 2. Avoid low color temperature light source, such as tungsten, halogen, or incandescent lamp. 3. Avoid uneven or irregular surfaces. Place the product on flat surfaces. 4. Avoid a table or surface that is as transparent or reflective as glass or mirror. 5. Avoid placing any objects within the space between the main unit and the laser projected keyboard layout. Note Because this product uses infrared rays, strong infrared radiation from direct or reflected sunlight or from tungsten

(halogen or incandescent) lighting may cause operating error. Caution Although this equipment is classified as Class II laser product, for your safety, do not directly expose your eyes to pattern projection beams or infrared rays. 14 4. Identifying Parts

(1) Pattern Projector: laser projects an image of QWERTY keyboard pattern onto a flat surface in front of the typist.

(2) Sensor: detects reflection of infrared and triangulates the location to determine a keystroke.

(3) IR: emits an invisible plane of light to blanket operational area.

*Refer to illustration on page 16 15 Front View LEDIndicator Battery Charging Full Low Bluetooth HID Searching last device Searching new device Successful pairing Disconnected Lower LED Red Green Red (blinking) Upper LED Blue (blinking) Blue (blinking) Blue Blue (blinking) 16 Rear View 17 5. Connecting EPIC EPIC pairs via Bluetooth.

- Compatible with any Bluetooth HID profile devices:

iOS 4 and later (most iPhone and iPad) Android 4.0 or later Windows XP/Vista/7/8, Mac OS X

**Pass code is not required for Bluetooth HID connection.

. Bluetooth connection instructions for iOS/Android/Windows 1. Power on EPIC 2. On primary device, go to Bluetooth setting; search for Bluetooth devices. 3. When the device discovers "Celluon PK Series", tap to connect. 4. Solid blue LED indicates successful pairing. Enabling Pairing Mode 1. Turn on EPIC. 2. Locate pairing switch (refer to above illustration). 3. Press and hold pairing switch for about 2 seconds. 4. Pair with device. 18 19 iring on Android Screen shot of successful pa 20 sful pairing on iOS Screen shot of success 21 21 6. Making Adjustments Sound Feedback Adjustment There are total of 5 levels; sound level remains as adjusted when device is turned off and on. To increase sound level:

Tap and hold FN key and tap UP arrow key. To decrease sound level:

Tap and hold FN key and tap DOWN arrow key. Projection Brightness Adjustment There are total of 5 brightness levels To increase brightness:

Tap and hold "FN" key and tap RIGHT arrow key. To lower brightness:

Tap and hold "FN" key and tap LEFT arrow key. 22 Sensitivity Adjustment To increase sensitivity:

Tap and hold "FN" key and tap ">." key. To lower sensitivity:

Tap and hold "FN" key and tap "<," key. Note:

All adjustments must be repeated for each level. Power Saving Mode Tap and hold "FN" and tap "BACK" key to disable laser projection. To turn on laser projection, tap the operational area with 3 fingers (fingers must be separated). 23 Multi-Touch Mouse Mode Multi-touch mouse function is only available on devices that support such feature (Windows 7 and later, Mac OS). Mouse/cursor function is available on devices that support such feature (Most Windows, Android and Mac OS) Note: iOS operating system does not support mouse function. Click & Right Click 1. From keyboard mode, press and hold "FN" and tap on cursor button, located adjacent to space bar to switch to mouse function. Blinking LED indicates mouse mode. Control the Cursor Drag & Scroll Forward & Back Zoom In & Out 24 25 2. Tap on cursor key to switch back to keyboard mode. Solid LED indicates keyboard mode. Special keys Projection layout corresponds to keys found on English QWERTY layout. When different language is selected on primary device, some keys may not correspond to input keys on primary device. Same applies to "FN" and" ALT" keys. 26 27 Electrical Characteristics Item Specification 7. Specification Pattern Projector Item Item Specification Specification 28 29 Environmental Conditions Item Operating Temperature Storage Temperature Specification 0~35C/90%RH

-5~35C/~90%RH Dimensions and Specifications Item Size (mm) Weight (g) Specification 70mm x 20mm x 35mm Approx. 60g 30 8. Label Specification Label Label location 31 MEMO MEMO 32 33 Celluon, Inc. Ace High-End Tower 1101, 235-2 Guro-dong, Guro-gu Seoul, Korea(152-740) sales@celluon.com support@celluon.com 12A

CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com EUT Internal Photographs CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com Antenna

CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com EUT External Photographs CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com

CTK Co., Ltd. 386-1, Ho-dong, Cheoin-gu, Yongin-si, Gyeonggi-do, 449-100, Korea Tel: +82-31-339-9970 Fax: +82-31-339-9855 www.e-ctk.com Label Photographs

Ace High-End Tower 1101 235-2, Guro-Dong, Guro-

Gu, Seoul, Korea, 152-740 Tel No : +82-2-6220-3886 Fax No : +82-2-6220-3899 ATTESTATION STATEMENT In re : Celluon, Inc. FCC ID : TCLEPIC Date : 2013-04-24 15.247(a)(1) The hopping sequence is random. Each hopping channels is used equally on the average. The receiver input bandwidth matches the bandwidth of the transmitted signal. The receiver has the ability to shift frequencies in synchronization with the transmitted signals. Example of a 79 hopping sequence in data mode:

40, 21, 44, 23, 42, 53, 46, 55, 48, 33, 52, 35, 50, 65, 54, 67, 56, 37, 60, 39, 58, 69, 62, 71, 64, 25, 68, 27, 66, 57, 70, 59, 72, 29, 76, 31, 74, 61, 78, 63, 01, 41, 05, 43, 03, 73, 07, 75, 09, 45, 13, 47, 11, 77, 15, 00, 64, 49, 66, 53, 68, 02, 70, 06, 01, 51, 03, 55, 05, 04 15.247(g) The system is designed to comply with all of the regulations in Section 15.247 when the transmitter is presented with a continuous data (or information). 15.247(h) The system does not coordinate its channel selection/hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. Sincerely, PARK CHUN BAE / Team Manager Celluon, Inc.

Ace High-End Tower 1101 235-2, Guro-Dong, Guro-Gu, Seoul, Korea, 152-740 Tel No : +82-2-6220-3886 Fax No : +82-2-6220-3899 File Name Block Diagram(Epic).pdf Schematics(Epic).pdf Part List(Epic).pdf Operational Description(Epic).pdf Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: TCLEPIC Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Parts List Operational description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:

Exhibit Type

-

Sincerely, PARK CHUN BAE / Team Manager Celluon, Inc. File Name

-

Rev 11/20/07